Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Instructions
1. The student should submit the homework on or before the due date. (LATE SUBMISSION = 0 MARKS)
2. Answers should be hand written on a A4 or a letter size bond papers. (20% of the marks obtained will be reduced)
3. The student should print his/her corresponding question-paper and staple it along with his/her answer sheets. (20%
of the marks obtained will be reduced)
4. In the calculations, the student should maintain at least a precision of 3 decimal places with a correct rounding.
(20% of the marks obtained will be reduced)
Questions
10
V2
Voltage (V)
Voltage (V)
10 V1
V1
0
0
Vo Vi
Vi Vo
Figure 1: Input (Vi ) and output (Vo ) voltage curves Figure 2: Input (Vi ) and output (Vo ) voltage curves
1. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generates an output Vo as shown in Figure 1.
Where V1 = 8 V and V2 = 18 V
2. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generate and output Vo as shown in Figure 2.
Where V1 = 8 V.
1
Universidad Autonoma de Coahuila
Facultad de Ingeniera Mecanica y Electrica
Unidad Torreon
Instructions
1. The student should submit the homework on or before the due date. (LATE SUBMISSION = 0 MARKS)
2. Answers should be hand written on a A4 or a letter size bond papers. (20% of the marks obtained will be reduced)
3. The student should print his/her corresponding question-paper and staple it along with his/her answer sheets. (20%
of the marks obtained will be reduced)
4. In the calculations, the student should maintain at least a precision of 3 decimal places with a correct rounding.
(20% of the marks obtained will be reduced)
Questions
10
V2
Voltage (V)
Voltage (V)
10 V1
V1
0
0
Vo Vi
Vi Vo
Figure 3: Input (Vi ) and output (Vo ) voltage curves Figure 4: Input (Vi ) and output (Vo ) voltage curves
1. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generates an output Vo as shown in Figure 1.
Where V1 = 3 V and V2 = 13 V
2. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generate and output Vo as shown in Figure 2.
Where V1 = 3 V.
1
Universidad Autonoma de Coahuila
Facultad de Ingeniera Mecanica y Electrica
Unidad Torreon
Instructions
1. The student should submit the homework on or before the due date. (LATE SUBMISSION = 0 MARKS)
2. Answers should be hand written on a A4 or a letter size bond papers. (20% of the marks obtained will be reduced)
3. The student should print his/her corresponding question-paper and staple it along with his/her answer sheets. (20%
of the marks obtained will be reduced)
4. In the calculations, the student should maintain at least a precision of 3 decimal places with a correct rounding.
(20% of the marks obtained will be reduced)
Questions
10
V2
Voltage (V)
Voltage (V)
10 V1
V1
0
0
Vo Vi
Vi Vo
Figure 5: Input (Vi ) and output (Vo ) voltage curves Figure 6: Input (Vi ) and output (Vo ) voltage curves
1. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generates an output Vo as shown in Figure 1.
Where V1 = 4 V and V2 = 14 V
2. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generate and output Vo as shown in Figure 2.
Where V1 = 4 V.
1
Universidad Autonoma de Coahuila
Facultad de Ingeniera Mecanica y Electrica
Unidad Torreon
Instructions
1. The student should submit the homework on or before the due date. (LATE SUBMISSION = 0 MARKS)
2. Answers should be hand written on a A4 or a letter size bond papers. (20% of the marks obtained will be reduced)
3. The student should print his/her corresponding question-paper and staple it along with his/her answer sheets. (20%
of the marks obtained will be reduced)
4. In the calculations, the student should maintain at least a precision of 3 decimal places with a correct rounding.
(20% of the marks obtained will be reduced)
Questions
10
V2
Voltage (V)
Voltage (V)
10 V1
V1
0
0
Vo Vi
Vi Vo
Figure 7: Input (Vi ) and output (Vo ) voltage curves Figure 8: Input (Vi ) and output (Vo ) voltage curves
1. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generates an output Vo as shown in Figure 1.
Where V1 = 2 V and V2 = 12 V
2. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generate and output Vo as shown in Figure 2.
Where V1 = 2 V.
1
Universidad Autonoma de Coahuila
Facultad de Ingeniera Mecanica y Electrica
Unidad Torreon
Instructions
1. The student should submit the homework on or before the due date. (LATE SUBMISSION = 0 MARKS)
2. Answers should be hand written on a A4 or a letter size bond papers. (20% of the marks obtained will be reduced)
3. The student should print his/her corresponding question-paper and staple it along with his/her answer sheets. (20%
of the marks obtained will be reduced)
4. In the calculations, the student should maintain at least a precision of 3 decimal places with a correct rounding.
(20% of the marks obtained will be reduced)
Questions
10
V2
Voltage (V)
Voltage (V)
10 V1
V1
0
0
Vo Vi
Vi Vo
Figure 9: Input (Vi ) and output (Vo ) voltage curves Figure 10: Input (Vi ) and output (Vo ) voltage curves
1. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generates an output Vo as shown in Figure 1.
Where V1 = 4 V and V2 = 14 V
2. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generate and output Vo as shown in Figure 2.
Where V1 = 4 V.
1
Universidad Autonoma de Coahuila
Facultad de Ingeniera Mecanica y Electrica
Unidad Torreon
Instructions
1. The student should submit the homework on or before the due date. (LATE SUBMISSION = 0 MARKS)
2. Answers should be hand written on a A4 or a letter size bond papers. (20% of the marks obtained will be reduced)
3. The student should print his/her corresponding question-paper and staple it along with his/her answer sheets. (20%
of the marks obtained will be reduced)
4. In the calculations, the student should maintain at least a precision of 3 decimal places with a correct rounding.
(20% of the marks obtained will be reduced)
Questions
10
V2
Voltage (V)
Voltage (V)
10 V1
V1
0
0
Vo Vi
Vi Vo
Figure 11: Input (Vi ) and output (Vo ) voltage curves Figure 12: Input (Vi ) and output (Vo ) voltage curves
1. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generates an output Vo as shown in Figure 1.
Where V1 = 4 V and V2 = 14 V
2. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generate and output Vo as shown in Figure 2.
Where V1 = 4 V.
1
Universidad Autonoma de Coahuila
Facultad de Ingeniera Mecanica y Electrica
Unidad Torreon
Instructions
1. The student should submit the homework on or before the due date. (LATE SUBMISSION = 0 MARKS)
2. Answers should be hand written on a A4 or a letter size bond papers. (20% of the marks obtained will be reduced)
3. The student should print his/her corresponding question-paper and staple it along with his/her answer sheets. (20%
of the marks obtained will be reduced)
4. In the calculations, the student should maintain at least a precision of 3 decimal places with a correct rounding.
(20% of the marks obtained will be reduced)
Questions
10
V2
Voltage (V)
Voltage (V)
10 V1
V1
0
0
Vo Vi
Vi Vo
Figure 13: Input (Vi ) and output (Vo ) voltage curves Figure 14: Input (Vi ) and output (Vo ) voltage curves
1. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generates an output Vo as shown in Figure 1.
Where V1 = 7 V and V2 = 17 V
2. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generate and output Vo as shown in Figure 2.
Where V1 = 7 V.
1
Universidad Autonoma de Coahuila
Facultad de Ingeniera Mecanica y Electrica
Unidad Torreon
Instructions
1. The student should submit the homework on or before the due date. (LATE SUBMISSION = 0 MARKS)
2. Answers should be hand written on a A4 or a letter size bond papers. (20% of the marks obtained will be reduced)
3. The student should print his/her corresponding question-paper and staple it along with his/her answer sheets. (20%
of the marks obtained will be reduced)
4. In the calculations, the student should maintain at least a precision of 3 decimal places with a correct rounding.
(20% of the marks obtained will be reduced)
Questions
10
V2
Voltage (V)
Voltage (V)
10 V1
V1
0
0
Vo Vi
Vi Vo
Figure 15: Input (Vi ) and output (Vo ) voltage curves Figure 16: Input (Vi ) and output (Vo ) voltage curves
1. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generates an output Vo as shown in Figure 1.
Where V1 = 4 V and V2 = 14 V
2. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generate and output Vo as shown in Figure 2.
Where V1 = 4 V.
1
Universidad Autonoma de Coahuila
Facultad de Ingeniera Mecanica y Electrica
Unidad Torreon
Instructions
1. The student should submit the homework on or before the due date. (LATE SUBMISSION = 0 MARKS)
2. Answers should be hand written on a A4 or a letter size bond papers. (20% of the marks obtained will be reduced)
3. The student should print his/her corresponding question-paper and staple it along with his/her answer sheets. (20%
of the marks obtained will be reduced)
4. In the calculations, the student should maintain at least a precision of 3 decimal places with a correct rounding.
(20% of the marks obtained will be reduced)
Questions
10
V2
Voltage (V)
Voltage (V)
10 V1
V1
0
0
Vo Vi
Vi Vo
Figure 17: Input (Vi ) and output (Vo ) voltage curves Figure 18: Input (Vi ) and output (Vo ) voltage curves
1. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generates an output Vo as shown in Figure 1.
Where V1 = 7 V and V2 = 17 V
2. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generate and output Vo as shown in Figure 2.
Where V1 = 7 V.
1
Universidad Autonoma de Coahuila
Facultad de Ingeniera Mecanica y Electrica
Unidad Torreon
Instructions
1. The student should submit the homework on or before the due date. (LATE SUBMISSION = 0 MARKS)
2. Answers should be hand written on a A4 or a letter size bond papers. (20% of the marks obtained will be reduced)
3. The student should print his/her corresponding question-paper and staple it along with his/her answer sheets. (20%
of the marks obtained will be reduced)
4. In the calculations, the student should maintain at least a precision of 3 decimal places with a correct rounding.
(20% of the marks obtained will be reduced)
Questions
10
V2
Voltage (V)
Voltage (V)
10 V1
V1
0
0
Vo Vi
Vi Vo
Figure 19: Input (Vi ) and output (Vo ) voltage curves Figure 20: Input (Vi ) and output (Vo ) voltage curves
1. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generates an output Vo as shown in Figure 1.
Where V1 = 2 V and V2 = 12 V
2. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generate and output Vo as shown in Figure 2.
Where V1 = 2 V.
1
Universidad Autonoma de Coahuila
Facultad de Ingeniera Mecanica y Electrica
Unidad Torreon
Instructions
1. The student should submit the homework on or before the due date. (LATE SUBMISSION = 0 MARKS)
2. Answers should be hand written on a A4 or a letter size bond papers. (20% of the marks obtained will be reduced)
3. The student should print his/her corresponding question-paper and staple it along with his/her answer sheets. (20%
of the marks obtained will be reduced)
4. In the calculations, the student should maintain at least a precision of 3 decimal places with a correct rounding.
(20% of the marks obtained will be reduced)
Questions
10
V2
Voltage (V)
Voltage (V)
10 V1
V1
0
0
Vo Vi
Vi Vo
Figure 21: Input (Vi ) and output (Vo ) voltage curves Figure 22: Input (Vi ) and output (Vo ) voltage curves
1. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generates an output Vo as shown in Figure 1.
Where V1 = 5 V and V2 = 15 V
2. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generate and output Vo as shown in Figure 2.
Where V1 = 5 V.
1
Universidad Autonoma de Coahuila
Facultad de Ingeniera Mecanica y Electrica
Unidad Torreon
Instructions
1. The student should submit the homework on or before the due date. (LATE SUBMISSION = 0 MARKS)
2. Answers should be hand written on a A4 or a letter size bond papers. (20% of the marks obtained will be reduced)
3. The student should print his/her corresponding question-paper and staple it along with his/her answer sheets. (20%
of the marks obtained will be reduced)
4. In the calculations, the student should maintain at least a precision of 3 decimal places with a correct rounding.
(20% of the marks obtained will be reduced)
Questions
10
V2
Voltage (V)
Voltage (V)
10 V1
V1
0
0
Vo Vi
Vi Vo
Figure 23: Input (Vi ) and output (Vo ) voltage curves Figure 24: Input (Vi ) and output (Vo ) voltage curves
1. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generates an output Vo as shown in Figure 1.
Where V1 = 9 V and V2 = 19 V
2. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generate and output Vo as shown in Figure 2.
Where V1 = 9 V.
1
Universidad Autonoma de Coahuila
Facultad de Ingeniera Mecanica y Electrica
Unidad Torreon
Instructions
1. The student should submit the homework on or before the due date. (LATE SUBMISSION = 0 MARKS)
2. Answers should be hand written on a A4 or a letter size bond papers. (20% of the marks obtained will be reduced)
3. The student should print his/her corresponding question-paper and staple it along with his/her answer sheets. (20%
of the marks obtained will be reduced)
4. In the calculations, the student should maintain at least a precision of 3 decimal places with a correct rounding.
(20% of the marks obtained will be reduced)
Questions
10
V2
Voltage (V)
Voltage (V)
10 V1
V1
0
0
Vo Vi
Vi Vo
Figure 25: Input (Vi ) and output (Vo ) voltage curves Figure 26: Input (Vi ) and output (Vo ) voltage curves
1. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generates an output Vo as shown in Figure 1.
Where V1 = 9 V and V2 = 19 V
2. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generate and output Vo as shown in Figure 2.
Where V1 = 9 V.
1
Universidad Autonoma de Coahuila
Facultad de Ingeniera Mecanica y Electrica
Unidad Torreon
Instructions
1. The student should submit the homework on or before the due date. (LATE SUBMISSION = 0 MARKS)
2. Answers should be hand written on a A4 or a letter size bond papers. (20% of the marks obtained will be reduced)
3. The student should print his/her corresponding question-paper and staple it along with his/her answer sheets. (20%
of the marks obtained will be reduced)
4. In the calculations, the student should maintain at least a precision of 3 decimal places with a correct rounding.
(20% of the marks obtained will be reduced)
Questions
10
V2
Voltage (V)
Voltage (V)
10 V1
V1
0
0
Vo Vi
Vi Vo
Figure 27: Input (Vi ) and output (Vo ) voltage curves Figure 28: Input (Vi ) and output (Vo ) voltage curves
1. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generates an output Vo as shown in Figure 1.
Where V1 = 8 V and V2 = 18 V
2. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generate and output Vo as shown in Figure 2.
Where V1 = 8 V.
1
Universidad Autonoma de Coahuila
Facultad de Ingeniera Mecanica y Electrica
Unidad Torreon
Instructions
1. The student should submit the homework on or before the due date. (LATE SUBMISSION = 0 MARKS)
2. Answers should be hand written on a A4 or a letter size bond papers. (20% of the marks obtained will be reduced)
3. The student should print his/her corresponding question-paper and staple it along with his/her answer sheets. (20%
of the marks obtained will be reduced)
4. In the calculations, the student should maintain at least a precision of 3 decimal places with a correct rounding.
(20% of the marks obtained will be reduced)
Questions
10
V2
Voltage (V)
Voltage (V)
10 V1
V1
0
0
Vo Vi
Vi Vo
Figure 29: Input (Vi ) and output (Vo ) voltage curves Figure 30: Input (Vi ) and output (Vo ) voltage curves
1. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generates an output Vo as shown in Figure 1.
Where V1 = 2 V and V2 = 12 V
2. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generate and output Vo as shown in Figure 2.
Where V1 = 2 V.
1
Universidad Autonoma de Coahuila
Facultad de Ingeniera Mecanica y Electrica
Unidad Torreon
Instructions
1. The student should submit the homework on or before the due date. (LATE SUBMISSION = 0 MARKS)
2. Answers should be hand written on a A4 or a letter size bond papers. (20% of the marks obtained will be reduced)
3. The student should print his/her corresponding question-paper and staple it along with his/her answer sheets. (20%
of the marks obtained will be reduced)
4. In the calculations, the student should maintain at least a precision of 3 decimal places with a correct rounding.
(20% of the marks obtained will be reduced)
Questions
10
V2
Voltage (V)
Voltage (V)
10 V1
V1
0
0
Vo Vi
Vi Vo
Figure 31: Input (Vi ) and output (Vo ) voltage curves Figure 32: Input (Vi ) and output (Vo ) voltage curves
1. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generates an output Vo as shown in Figure 1.
Where V1 = 9 V and V2 = 19 V
2. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generate and output Vo as shown in Figure 2.
Where V1 = 9 V.
1
Universidad Autonoma de Coahuila
Facultad de Ingeniera Mecanica y Electrica
Unidad Torreon
Instructions
1. The student should submit the homework on or before the due date. (LATE SUBMISSION = 0 MARKS)
2. Answers should be hand written on a A4 or a letter size bond papers. (20% of the marks obtained will be reduced)
3. The student should print his/her corresponding question-paper and staple it along with his/her answer sheets. (20%
of the marks obtained will be reduced)
4. In the calculations, the student should maintain at least a precision of 3 decimal places with a correct rounding.
(20% of the marks obtained will be reduced)
Questions
10
V2
Voltage (V)
Voltage (V)
10 V1
V1
0
0
Vo Vi
Vi Vo
Figure 33: Input (Vi ) and output (Vo ) voltage curves Figure 34: Input (Vi ) and output (Vo ) voltage curves
1. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generates an output Vo as shown in Figure 1.
Where V1 = 4 V and V2 = 14 V
2. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generate and output Vo as shown in Figure 2.
Where V1 = 4 V.
1
Universidad Autonoma de Coahuila
Facultad de Ingeniera Mecanica y Electrica
Unidad Torreon
Instructions
1. The student should submit the homework on or before the due date. (LATE SUBMISSION = 0 MARKS)
2. Answers should be hand written on a A4 or a letter size bond papers. (20% of the marks obtained will be reduced)
3. The student should print his/her corresponding question-paper and staple it along with his/her answer sheets. (20%
of the marks obtained will be reduced)
4. In the calculations, the student should maintain at least a precision of 3 decimal places with a correct rounding.
(20% of the marks obtained will be reduced)
Questions
10
V2
Voltage (V)
Voltage (V)
10 V1
V1
0
0
Vo Vi
Vi Vo
Figure 35: Input (Vi ) and output (Vo ) voltage curves Figure 36: Input (Vi ) and output (Vo ) voltage curves
1. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generates an output Vo as shown in Figure 1.
Where V1 = 3 V and V2 = 13 V
2. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generate and output Vo as shown in Figure 2.
Where V1 = 3 V.
1
Universidad Autonoma de Coahuila
Facultad de Ingeniera Mecanica y Electrica
Unidad Torreon
Instructions
1. The student should submit the homework on or before the due date. (LATE SUBMISSION = 0 MARKS)
2. Answers should be hand written on a A4 or a letter size bond papers. (20% of the marks obtained will be reduced)
3. The student should print his/her corresponding question-paper and staple it along with his/her answer sheets. (20%
of the marks obtained will be reduced)
4. In the calculations, the student should maintain at least a precision of 3 decimal places with a correct rounding.
(20% of the marks obtained will be reduced)
Questions
10
V2
Voltage (V)
Voltage (V)
10 V1
V1
0
0
Vo Vi
Vi Vo
Figure 37: Input (Vi ) and output (Vo ) voltage curves Figure 38: Input (Vi ) and output (Vo ) voltage curves
1. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generates an output Vo as shown in Figure 1.
Where V1 = 5 V and V2 = 15 V
2. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generate and output Vo as shown in Figure 2.
Where V1 = 5 V.
1
Universidad Autonoma de Coahuila
Facultad de Ingeniera Mecanica y Electrica
Unidad Torreon
Instructions
1. The student should submit the homework on or before the due date. (LATE SUBMISSION = 0 MARKS)
2. Answers should be hand written on a A4 or a letter size bond papers. (20% of the marks obtained will be reduced)
3. The student should print his/her corresponding question-paper and staple it along with his/her answer sheets. (20%
of the marks obtained will be reduced)
4. In the calculations, the student should maintain at least a precision of 3 decimal places with a correct rounding.
(20% of the marks obtained will be reduced)
Questions
10
V2
Voltage (V)
Voltage (V)
10 V1
V1
0
0
Vo Vi
Vi Vo
Figure 39: Input (Vi ) and output (Vo ) voltage curves Figure 40: Input (Vi ) and output (Vo ) voltage curves
1. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generates an output Vo as shown in Figure 1.
Where V1 = 7 V and V2 = 17 V
2. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generate and output Vo as shown in Figure 2.
Where V1 = 7 V.
1
Universidad Autonoma de Coahuila
Facultad de Ingeniera Mecanica y Electrica
Unidad Torreon
Instructions
1. The student should submit the homework on or before the due date. (LATE SUBMISSION = 0 MARKS)
2. Answers should be hand written on a A4 or a letter size bond papers. (20% of the marks obtained will be reduced)
3. The student should print his/her corresponding question-paper and staple it along with his/her answer sheets. (20%
of the marks obtained will be reduced)
4. In the calculations, the student should maintain at least a precision of 3 decimal places with a correct rounding.
(20% of the marks obtained will be reduced)
Questions
10
V2
Voltage (V)
Voltage (V)
10 V1
V1
0
0
Vo Vi
Vi Vo
Figure 41: Input (Vi ) and output (Vo ) voltage curves Figure 42: Input (Vi ) and output (Vo ) voltage curves
1. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generates an output Vo as shown in Figure 1.
Where V1 = 6 V and V2 = 16 V
2. Design a circuit which takes the input voltage Vi = 10 sin (120t)V and generate and output Vo as shown in Figure 2.
Where V1 = 6 V.