Sei sulla pagina 1di 5

DM4500 Series

3-Piece Ball Valve

FEATURES & BENEFITS


* For food and general chemical service application
* Comes standard in stainless steel and carbon steel
* Investment cast body and end caps
* Self adjusting stem packing
* Blow-out proof stem design
* 100% air tested under water at 100 psi
* Temperature range of -40F to +450F
* Working pressure: 1/4 - 2 at 1000 psi, 2-1/2 - 4 at 800 psi
* ISO 5211 mounting pad

OPTIONS
* End connection: threaded, socket weld, butt weld, or anged
* Spring return (dead-man) handle
* Oval Handle Please visit www.jowcontrols.com
* Full automation capabilities
and use our Congurator for
* Manual valve with limit switch
* V-ball for control valve in 15, 30, 45, 60 , 90, slot, or custom
complete part numbers
* Hastalloy C, Super duplex, Alloy 20, and Monel

BREAK-TORQUE VALUE (in lb/ at 0 psi)


SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"
GREASE 35 35 45 50 65 100 155 205 310 410 640
NON-GREASE 45 45 55 65 85 145 240 270 605 755 930
Note 1: The greases J Flow Controls uses include lubricants & anti-seize grease that are both SILICONE-FREE.
Note 2: J Flow Controls strongly suggests increasing the torque at least 30%-40% for safety factor when mounting an actuator.

PRESSURE/ TEMPERATURE FLOW COEFFICIENT


1200 SIZE Cv FACTOR
1/4 7.5
PRESSURE (P.S.I.)

1000
3/8 16
800
1/2 40
600
1 70
400 1-1/4 110
200 1-1/2 240
0 2 400
-20 0 100 200 300 400 500 2-1/2 700
TEMPERATURE (F)
3 980
1/4 - 2: PTFE RPTFE (PTFE+15% Glass) TFM (TFM1600)
2-1/2 - 4: PTFE RPTFE (PTFE+15% Glass) TFM (TFM1600) 4 1700

All information found on this brochure


J FLOW CONTROLS 4665 Interstate Dr. Cincinnati, OH 45246 is subject to change at the discretion
of J Flow Controls. For the most up to
Tel : 1-513-731-2900 Fax : 1-513-731-6939 information, contact J Flow Controls.
http://www.jflowcontrols.com E-mail: sales@jflowcontrols.com 2014 J Flow ALL RIGHTS RESERVED
DM4500 Series
3-Piece Ball Valve

DIMENSIONAL DRAWING

DIMENSIONS (mm)
SIZE A B C D d1 d2 E F G H L S T P Q L1 V W
1/4" 37 11 130 11 6.0 6.0 58 36 42 9 60.5 14.2 11.1 10 17 60.5 19 44
3/8" 37 11 130 12.5 6.0 6.0 58 36 42 9 60.5 17.5 11.1 12 19 60.5 19 44
1/2" 37 11 130 15 6.0 6.0 58 36 42 9 63.5 21.8 12.7 15 21.5 63.5 19 44
3/4" 40 11 130 20 6.0 6.0 64 36 42 9 75.5 27.1 14.3 20 27.5 75.5 19 44
1" 48 14 155 25 6.0 7.0 77 42 50 11 86 33.8 15.9 25 34.5 86 24 52
1 1/4" 53.5 14 155 32 6.0 7.0 83 42 50 11 96 42.5 17.5 32 42.8 104 24 52
1 1/2" 63.5 18 205 38 7.0 9.0 92 50 70 14 111 48.7 19.1 38 49 117 28 53
2" 72 18 205 50 7.0 9.0 100 50 70 14 129 61.1 22.2 50 61 138 28 53
2-1/2" 92 22 290 65 9.0 11.3 140 70 102 17 152.5 73.9 22.2 65 77 170 - -
3" 102 22 290 80 9.0 11.3 150 70 102 17 168.5 89.9 25.4 80 91 192 - -
4" 132 26 335 100 11.3 13.5 195 102 125 22 212.5 115.2 32 100 118 226 - -

All information found on this brochure


J FLOW CONTROLS 4665 Interstate Dr. Cincinnati, OH 45246 is subject to change at the discretion
of J Flow Controls. For the most up to
Tel : 1-513-731-2900 Fax : 1-513-731-6939 information, contact J Flow Controls.
http://www.jflowcontrols.com E-mail: sales@jflowcontrols.com 2014 J Flow ALL RIGHTS RESERVED
DM4500 Series
3-Piece Ball Valve

PARTS BLOWOUT VIEW

Handle nut
Handle

Space
Disk washer(2)
Nut stop

Gland Stem nut

Stem packing(1 set)


Stop pin
Nuts

Nut
O-ring
End cap
Thrust washer
Gasket

Ball seat

Stem
MATERIALS LIST
Body ITEM PART NAME MATERIALS
1 END CAP CF8M/WCB
2 BODY CF8M/WCB
Ball 3 BALL SS 316
4 SEAT PTFE
Ball seat 5 GASKET PTFE
6 BOLTS SS 304
Gasket
7 THRUST WASHER RPTFE
8 O-RING VITON
End cap 9 STEM PACKING PTFE
10 STEM SS 316
11 GLAND SS 304
12 DISK WASHER SS 301
Bolts 13 STEM NUT SS 304
14 NUT STOP SS 304
15 SPACE WASHER SS 304
16 HANDLE NUT SS 304
17 HANDLE SS 304
18 HANDLE COVER PLASTIC
19 STOP PIN SS 304
20 NUT SS 304
21 HANDLE NUT SS 304
22 HANDLE COVER SS 304
23 HANDLE SS 304

V-BALL OPTION FOR MODULATING CONTROL


45

60
30

90
15

Straight Port 15 V-Port 30 V-Port 45 V-Port 60 V-Port 90 V-Port

For Cv, please see our J Flow V-Ball Cv Literature

All information found on this brochure


J FLOW CONTROLS 4665 Interstate Dr. Cincinnati, OH 45246 is subject to change at the discretion
of J Flow Controls. For the most up to
Tel : 1-513-731-2900 Fax : 1-513-731-6939 information, contact J Flow Controls.
http://www.jflowcontrols.com E-mail: sales@jflowcontrols.com 2014 J Flow ALL RIGHTS RESERVED
DM4500 Series
3-Piece Ball Valve

DIMENSIONAL DRAWING
15 16 18 19 20

14
13
P
12 9

B
d1 8
11
H

d2 7
10

K
A

d
c
E
17
F 6A 6B 5 4 3 2 1 f m-n
t
L

21 P

22 23

2 1/2"-4"

DIMENSIONS (mm) / ASME150


CLASS 150 FLANGE DIMENSIONS
SIZE A B D d1 d2 K E F H P L
g c d f t m n
1/2" 37 11 15 6.0 6.0 98 36 42 9 127 130 35 60.5 89 1.6 11.2 16 4
3/4" 40 11 20 6.0 6.0 101 36 42 9 127 150 43 70 98 1.6 11.2 16 4
1" 48 14 25 6.0 7.0 94 42 50 11 160 160 51 79.5 108 1.6 11.2 16 4
1 1/4" 53 14 32 6.0 7.0 99 42 50 11 160 180 64 89 117 1.6 12.7 16 4
1 1/2" 63 18 38 7.0 9.0 115 50 70 14 205 200 73 98.5 127 1.6 14.3 16 4
2" 72 18 50 7.0 9.0 124 50 70 14 205 230 92 120.5 152 1.6 15.9 19 4
2-1/2" 92 22 65 9.0 11.3 140 70 102 17 300 290 105 139.5 178 1.6 17.8 19 4
3" 102 22 78 9.0 11.3 150 70 102 17 300 310 127 152.5 190 1.6 19.2 19 4
4" 132 26 100 11.3 13.5 190 102 125 22 350 350 157 190.5 229 1.6 24 19 8

BREAK-TORQUE VALUE for ASME150 (in lb/ at 0 psi)


SIZE 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"
GREASE 45 50 65 100 155 205 310 410 640
NON-GREASE 55 65 85 145 240 270 605 755 930
Note 1: The greases J Flow Controls uses include lubricants & anti-seize grease that are both SILICONE-FREE.
Note 2: J Flow Controls strongly suggests increasing the torque at least 30%-40% for safety factor when mounting an actuator.

All information found on this brochure


J FLOW CONTROLS 4665 Interstate Dr. Cincinnati, OH 45246 is subject to change at the discretion
of J Flow Controls. For the most up to
Tel : 1-513-731-2900 Fax : 1-513-731-6939 information, contact J Flow Controls.
http://www.jflowcontrols.com E-mail: sales@jflowcontrols.com 2014 J Flow ALL RIGHTS RESERVED
DM4500 Series
3-Piece Ball Valve

PARTS BLOWOUT VIEW nly


"-4"o
2 1/2
Set bolt

o nly Lever
"-2"
1/2
Lever head
Handle
Handl nut

(2 1 2 "~4" only) Plater

Ball seat Space


Disk washer(2)
Seat housing Nut stop
Gland Stem nut

Stem packing(1 set)


Stop pin
End cap

O-ring Nut
Nuts
Spring washer
Thrust washer
Gasket
Ball seat
Stem

Body
End cap

Bolts Ball
Spring washer
Ball seat
Nuts
Gasket

Bolts

Spring washer
End cap Nuts

(4" only)

MATERIALS LIST
ITEM PART NAME MATERIALS
1 FLANGED END CF8M
2 BODY CF8M
PRESSURE/ TEMPERATURE 3 BALL SS 316
4 SEAT PTFE
ASME150 5 GASKET PTFE
1200 6A BOLTS SS 304
6B NUTS SS 304
PRESSURE (P.S.I.)

1000 7 THRUST WASHER RPTFE


8 O-RING VITON
800
9 STEM PACKING PTFE
600 10 STEM SS 316
11 GLAND SS 304
400 12 DISK WAHSER SS 301
13 STEM NUT SS 304
200
14 NUT STOP SS 304
0 15 SPACE WASHER SS 304
-20 0 100 200 300 400 500 16 PLATER SS 304
TEMPERATURE (F) 17 STOP PIN SS 304
PTFE RPTFE (PTFE+15% Glass) TFM (TFM1600) 18 HANDLE NUT SS 304
19 HANDLE SS 304
20 HANDLE COVER PLASTIC
21 SET BOLT SS 304
22 LEVER HEAD CF8
23 LEVER STEEL PIPE

All information found on this brochure


J FLOW CONTROLS 4665 Interstate Dr. Cincinnati, OH 45246 is subject to change at the discretion
of J Flow Controls. For the most up to
Tel : 1-513-731-2900 Fax : 1-513-731-6939 information, contact J Flow Controls.
http://www.jflowcontrols.com E-mail: sales@jflowcontrols.com 2014 J Flow ALL RIGHTS RESERVED

Potrebbero piacerti anche