Sei sulla pagina 1di 171

Introduction to Creo Parametric 3.

Authored and published using


Copyright 2014 PTC Inc. and/or Its Subsidiary Companies. All Rights Reserved.
User and training guides and related documentation from PTC Inc. and its subsidiary companies (collectively
"PTC") are subject to the copyright laws of the United States and other countries and are provided under a license
agreement that restricts copying, disclosure, and use of such documentation. PTC hereby grants to the licensed
software user the right to make copies in printed form of this documentation if provided on software media, but
only for internal/personal use and in accordance with the license agreement under which the applicable software
is licensed. Any copy made shall include the PTC copyright notice and any other proprietary notice provided
by PTC. Training materials may not be copied without the express written consent of PTC. This documentation
may not be disclosed, transferred, modified, or reduced to any form, including electronic media, or transmitted or
made publicly available by any means without the prior written consent of PTC and no authorization is granted
to make copies for such purposes.
Information described herein is furnished for general information only, is subject to change without notice, and
should not be construed as a warranty or commitment by PTC. PTC assumes no responsibility or liability for any
errors or inaccuracies that may appear in this document.
The software described in this document is provided under written license agreement, contains valuable trade
secrets and proprietary information, and is protected by the copyright laws of the United States and other
countries. It may not be copied or distributed in any form or medium, disclosed to third parties, or used in any
manner not provided for in the software licenses agreement except with written prior approval from PTC.
UNAUTHORIZED USE OF SOFTWARE OR ITS DOCUMENTATION CAN RESULT IN CIVIL DAMAGES AND
CRIMINAL PROSECUTION. PTC regards software piracy as the crime it is, and we view offenders accordingly.
We do not tolerate the piracy of PTC software products, and we pursue (both civilly and criminally) those who do
so using all legal means available, including public and private surveillance resources. As part of these efforts,
PTC uses data monitoring and scouring technologies to obtain and transmit data on users of illegal copies of our
software. This data collection is not performed on users of legally licensed software from PTC and its authorized
distributors. If you are using an illegal copy of our software and do not consent to the collection and transmission
of such data (including to the United States), cease using the illegal version, and contact PTC to obtain a legally
licensed copy.
Important Copyright, Trademark, Patent, and Licensing Information: See the About Box, or copyright notice,
of your PTC software.
UNITED STATES GOVERNMENT RESTRICTED RIGHTS LEGEND
This document and the software described herein are Commercial Computer Documentation and Software,
pursuant to FAR 12.212(a)-(b) (OCT95) or DFARS 227.7202-1(a) and 227.7202-3(a) (JUN95), and are provided
to the US Government under a limited commercial license only. For procurements predating the above clauses,
use, duplication, or disclosure by the Government is subject to the restrictions set forth in subparagraph (c)(1)(ii)
of the Rights in Technical Data and Computer Software Clause at DFARS 252.227-7013 (OCT88) or Commercial
Computer Software-Restricted Rights at FAR 52.227-19(c)(1)-(2) (JUN87), as applicable. 01012014
PTC Inc., 140 Kendrick Street, Needham, MA 02494 USA
PRINTING HISTORY
Document No. Date Description
TRN-4501-M01-EN-LM-P01 03/28/2014 Initial Printing of:
Introduction to Creo Parametric 3.0
Printed in the U.S.A
About PTC University
Welcome to PTC University!
With an unmatched depth and breadth of product development knowledge, PTC University helps
you realize the most value from PTC products. Only PTC University offers:
An innovative learning methodology PTCs Precision Learning Methodology is a proven
proprietary approach used by PTC to develop and deliver learning solutions.
Flexible Delivery Options PTC University ensures you receive the same quality training programs
regardless of the learning style. Our extensive experience, innovative learning techniques, and
targeted learning modules facilitate the rapid retention of concepts, and higher user productivity.
Premier Content and Expertise A thorough instructor certification process and direct access to
the PTC product development and PTC consulting organizations means that only PTC courses
can give you highly-qualified instructors, the most up-to-date product information and best
practices derived from thousands of deployments.
Global Focus PTC University delivers training where and when you need it by providing over
100 training centers located across 35 countries offering content in nine languages.
Delivering Value A role-based learning design ensures the right people have the right tools to do
their jobs productively while supporting the organizations overall performance goals.
The course you are about to take will expose you to a number of learning offerings that PTC
University has available. These include:
Instructor-led Training (ILT) The ideal blend of classroom lectures, personal demonstrations,
hands-on workshops, assessments, and post-classroom tools.
Pro/FICIENCY This Web-based, skills assessment and development-planning tool will help
improve your skills and productivity.
eLearning Libraries 24/7 access to Web-based training that will compliment your instructor-led
course.
Precision LMS A powerful learning management system that will manage your eLearning
Library and Pro/FICIENCY assessments.
PTC University additionally offers Precision Learning Programs. These are corporate learning
programs designed to your organizations specific goals, current skills, desired competencies, and
training preferences.
Whatever your learning needs are, PTC University can help you get the most out of your PTC
products.
PTC Telephone and Fax Numbers
North America
Education Services Registration
Tel: (888) 782-3773
Fax: (781) 370-5307
Technical Support (Monday - Friday)
Tel: (800) 477-6435
Fax: (781) 707-0328
License Management and Contracts
Tel: 877-ASK-4-PTC (877-275-4782)
Fax: (781) 707-0331
Europe
Technical Support, License Management, Training & Consulting
Tel: +800-PTC-4-HELP (00-800-78-24-43-57)
Asia
Please refer to http://www.ptc.com/services/training/contact.htm for contact information.
In addition, you can access the PTC Web site at www.ptc.com. Our Web site contains the latest
training schedules, registration information, directions to training facilities, and course descriptions.
You can also reach technical support, and register for online service options such as knowledge
base searches, reference libraries, and documentation. You can also find general information about
PTC, PTC Products, Consulting Services, Customer Support, and PTC Partners.
Precision Learning
Precision Learning in the Classroom
PTC University uses the Precision Learning methodology to develop effective, comprehensive class
material that will improve the productivity of both individuals and organizations. PTC then teaches
using the proven instructional design principal of Tell Me, Show Me, Let Me Do:
Topics are introduced through a short presentation, highlighting the key concepts.
These key concepts are then reinforced by seeing them applied in the software application.
You then apply the concepts through structured exercises.
After the course, a Pro/FICIENCY assessment is provided to enable you to assess your
understanding of the materials. The assessment results will also identify the class topics that
require further review.
At the end of the class, you will either take a Pro/FICIENCY assessment via your PTC University
eLearning account, or your instructor will provide training on how to do this after the class.

Precision Learning After the Class


Each student that enrolls in a PTC class has a PTC University eLearning account. This account will
be automatically created if you do not already have one.
As part of the class, you receive additional content in your account:
A Pro/FICIENCY assessment from the course content that generates a Recommended Learning
Report based on your results.
A Web-based training version of the course, based on the same instructional approach of lecture,
demonstration, and exercise. The Recommended Learning Report will link directly to sections
of this training that you may want to review.
Please note that Web-based training may not be available in all languages. The Web-based training
is available in your account for one year after the live class.
Precision Learning Recommendations
PTC uses a role-based training approach. The roles and the associated training
are graphically displayed in a curriculum map. Curriculum maps are available for
numerous PTC products and versions in the training section of our Web site at
http://www.ptc.com/services/edserv/learning/paths/index.htm.

Please note that a localized map may not be available in every language and that the map above is
partial and for illustration purposes only.
Before the end of the class, your instructor will review the map corresponding to the course you
are taking. This review, along with instructor recommendations, should give you some ideas for
additional training that corresponds to your role and job functions.
Training Agenda
Day 1
Module 01 Introduction to the Creo Parametric Basic Modeling Process
Module 02 Understanding Creo Parametric Concepts
Module 03 Using the Creo Parametric Interface
Module 04 Selecting Geometry, Features, and Models
Module 05 Editing Geometry, Features, and Models
Module 06 Creating Sketcher Geometry

Day 2
Module 07 Using Sketcher Tools
Module 08 Creating Sketches for Features
Module 09 Creating Datum Features: Planes and Axes
Module 10 Creating Extrudes, Revolves, and Ribs
Module 11 Sketcher Workflow
Module 12 Creating Sweeps and Blends

Day 3
Module 13 Creating Holes, Shells, and Draft
Module 14 Creating Rounds and Chamfers
Module 15 Project I
Module 16 Group, Copy, and Mirror Tools
Module 17 Creating Patterns
Module 18 Measuring and Inspecting Models

Day 4
Module 19 Assembling with Constraints
Module 20 Assembling with Connections
Module 21 Exploding Assemblies
Module 22 Drawing Layout and Views
Module 23 Creating Drawing Annotations
Module 24 Using Layers

Day 5
Module 25 Investigating Parent/Child Relationships
Module 26 Capturing and Managing Design Intent
Module 27 Resolving Failures and Seeking Help
Module 28 Project II
Table of Contents
Introduction to Creo Parametric 3.0
Creating Extrudes, Revolves, and Ribs ..................................................................................... 10-1
Creating the Crankshaft ..................................................................................................... 10-2
Thickening the Piston Wrist Pin Hole................................................................................... 10-5
Completing the Crankshaft ................................................................................................. 10-7
Creating Profile Rib Features............................................................................................ 10-10
Creating Sweeps and Blends..................................................................................................... 12-1
Creating a Sweep Through a 3-D Curve.............................................................................. 12-2
Creating a Blend Feature on FLYWHEEL.PRT and Embedding the Orientation Datum ........... 12-4
Creating Holes, Shells, and Draft............................................................................................... 13-1
Common Dashboard Options: Hole Depth........................................................................... 13-2
Creating Coaxial Holes ...................................................................................................... 13-3
Creating Linear Holes ........................................................................................................ 13-7
Creating Radial and Diameter Holes ................................................................................... 13-8
Shelling the Fuel Tank...................................................................................................... 13-10
Creating Rounds and Chamfers ................................................................................................ 14-1
Creating Rounds on the Rear Engine Block 1 ...................................................................... 14-2
Creating Rounds on the Gearbox Front ............................................................................... 14-4
Creating Rounds on the Rear Engine Block 2 ...................................................................... 14-7
Creating Full Rounds on the Connecting Rod ...................................................................... 14-8
Creating Chamfers on the Crankshaft ................................................................................. 14-9
Project I ..................................................................................................................................... 15-1
Group, Copy, and Mirror Tools................................................................................................... 16-1
Rotating a Copy of a Boss on the Engine Block ................................................................... 16-2
Copying and Translating Carburetor Features...................................................................... 16-4
Mirroring Selected Carburetor Features............................................................................... 16-6
Creating Patterns....................................................................................................................... 17-1
Patterning Vents Using a Two Directional Pattern ................................................................ 17-2
Creating Flywheel Blades Using an Axis Pattern.................................................................. 17-3
Creating Exhaust Cuts in the Muffler Using a Two Directional Axis Pattern ............................ 17-4
Patterning Rounds on the Cylinder Fins Using Reference Patterns ....................................... 17-6
Measuring and Inspecting Models ............................................................................................. 18-1
Analyzing Design Models ................................................................................................... 18-2
Assembling with Constraints..................................................................................................... 19-1
Creating the Engine Assembly using Automatic Constraints ................................................. 19-2
Creating the Drill Chuck Assembly using Automatic Constraints............................................ 19-6
Creating the Crank Assembly using Automatic Constraints................................................... 19-9
Creating the Piston Assembly using Automatic Constraints ................................................ 19-11
Drawing Layout and Views ........................................................................................................ 22-1
Creating Drawing Views ..................................................................................................... 22-2
Creating Drawing Annotations................................................................................................... 23-1
Annotating Drawings.......................................................................................................... 23-2
Using Layers.............................................................................................................................. 24-1
Creating and Managing Layers ........................................................................................... 24-2
Project II .................................................................................................................................... 28-1
Module 10
Creating Extrudes, Revolves, and Ribs

2014 PTC Module 10 | Page 1


Exercise 1: Creating the Crankshaft

Objectives
After successfully completing this exercise, you will be able to:
Create multiple extrude features to create the CRANKSHAFT.PRT.

Scenario
As part of the new design for the gas powered drill, you have been assigned to the crankshaft.
Create the crankshaft main journal and connecting rod journal, adhering to the existing sketch.

Close Window Erase Not Displayed


Extrude\Crankshaft CRANKSHAFT.PRT

Task 1: Create reference geometry and a sketch feature on CRANKSHAFT.PRT.

1. Enable only the following Datum Display types:


.
2. Select datum plane TOP from the model tree.
3. Click Plane from the Datum group.
4. Drag the drag handle up to an offset value of 14,
editing it if necessary.
5. In the Datum Plane dialog box, select the
Properties tab.
Edit the Name to OFFSET.
Click OK.
6. With datum plane OFFSET still selected, press
CTRL and select datum plane RIGHT.
7. Click Axis from the Datum group.
8. In the model tree, right-click the newly created
axis and select Rename. Type CRANK_PIN
and press ENTER.

Module 10 | Page 2 2014 PTC


9. Click Sketch .
10. Select datum plane FRONT, and click Sketch in
the Sketch dialog box.
11. Enable only the following Sketcher Display
types: .
12. Click References and select datum axis
CRANK_PIN as a new reference.
13. Click Close in the References dialog box.
14. Select Center and Point from the Circle
types drop-down menu and sketch the circle
with the center snapping to the CRANK_PIN
reference. Middle-click to stop circle creation
and edit the diameter to 10.
15. Click OK .
16. Click in the background to de-select the sketch.

Task 2: Create the main crankshaft journal.

1. Disable Plane Display and Axis Display .


2. Click Extrude .
3. Select the SKETCH_CRANK sketch from the
model tree.
4. Select the Options tab in the dashboard and
select Blind for SIDE 2.
5. Edit the depth for SIDE 1 to 46.5 and the depth
for SIDE 2 to 73.5.
6. Click Complete Feature .

7. Click Extrude .
8. Select the SKETCH_LOBE sketch from the
model tree.
9. Select the Options tab in the dashboard and
select To Selected for SIDE 1.
Select datum plane LOBE_FRONT from the
model tree as the reference.
10. In the Options tab of the dashboard, select To
Selected for SIDE 2.
Select datum plane LOBE_REAR from the
model tree as the reference.
11. Click Complete Feature .

2014 PTC Module 10 | Page 3


Task 3: Create the cut for the connecting rod journal.

1. Click Extrude .
2. Select the Sketch 1 sketch from the model tree.
3. In the dashboard, click Remove Material if
necessary.
Click Change Material Direction .
Edit the depth to Symmetric , and edit the
depth value to 10.

4. Click Complete Feature .


5. Click Save from the Quick Access toolbar.
6. Click File > Manage Session > Erase Current
> Yes to erase the model from memory.

This completes the exercise.

Module 10 | Page 4 2014 PTC


Exercise 2: Thickening the Piston Wrist Pin Hole

Objectives
After successfully completing this exercise, you will be able to:
Create a thicken feature to strengthen the PISTON.PRT.

Scenario
You have determined that the piston model and the stress that will be generated by the wrist pin are
too high for the current amount of material around the wrist pin hole. Add additional material around
the wrist pin hole so it meets design criteria.

Close Window Erase Not Displayed


Extrude\Thicken PISTON.PRT

Task 1: Thicken the piston's wrist pin hole area.

1. Disable all Datum Display types.


2. Middle-click and drag to orient the model.

3. Click Extrude from the Shapes group.


4. Select Sketch 5 from the model tree.
5. Select the Options tab in the dashboard and
select To Next for Side 1.
Select To Next for Side 2.
Click Thicken Sketch .
Edit the material thickness to 2.
Click Change Thickness Side as
necessary to toggle the thickness to the
outside of the sketch.
6. Click Complete Feature .

2014 PTC Module 10 | Page 5


Task 2: Cut out the center of the thickened extrude feature.

1. Click Extrude .
2. Select Sketch 5 from the model tree.
3. In the dashboard, click Remove Material .
Click Symmetric .
Edit the depth to 14.
Click Thicken Sketch .
Edit the material thickness to 2.
Click Change Thickness Side as
necessary to toggle the thickness to the
outside of the sketch.

4. Click Complete Feature .


5. Click Save from the Quick Access toolbar.
6. Click File > Manage Session > Erase Current
> Yes to erase the model from memory.

This completes the exercise.

Module 10 | Page 6 2014 PTC


Exercise 3: Completing the Crankshaft

Objectives
After successfully completing this exercise, you will be able to:
Create multiple revolve features to complete the CRANKSHAFT.PRT.

Scenario
You have been assigned to complete the crankshaft. Create the tapers on either end of the
crankshaft.
Close Window Erase Not Displayed
Revolve\Solid CRANKSHAFT.PRT

Task 1: Create the sketch for the taper on one side of the CRANKSHAFT.PRT.

1. Disable all Datum Display types.


2. Click Sketch from the Datum group.
3. Select datum plane RIGHT, orient datum plane
TOP to face Top, and click Sketch in the Sketch
dialog box.
4. Click Sketch View from the In Graphics
toolbar.
5. Enable only the following Sketcher Display
types: .
6. Select No Hidden from the Display Style
types drop-down menu in the In Graphics
toolbar.
7. Click References and select the top and right
surfaces of the main shaft as new references.
8. Click Close in the References dialog box.
9. Create the sketch:
Click Centerline from the Datum group
and sketch a horizontal geometry centerline
down the center of the shaft.
Zoom in on the right side of the sketch.
Select Line Chain from the Line types
drop-down menu and sketch two lines,
snapping the endpoints to the references.
Click Normal . Dimension and edit the
sketch as shown.
10. Click OK .
11. Orient to the Standard Orientation.
12. Select Shading from the Display Style types
drop-down menu in the In Graphics toolbar.

2014 PTC Module 10 | Page 7


Task 2: Cut the taper on the crankshaft using the sketch.

1. Click Revolve from the Shapes group.


2. Click Solid from the dashboard.
3. Click Remove Material from the dashboard.

4. Click Complete Feature .

Task 3: Create the sketch for the step on the other side of the CRANKSHAFT.PRT.

1. Click Sketch .
2. Click Use Previous in the Sketch dialog box.
3. Click No Hidden .
4. Click Sketch View .
5. Click References and select the top and left
surfaces of the main shaft as new references.
6. Click Close in the References dialog box.
7. Create the sketch:
Click Centerline and sketch a horizontal
geometry centerline down the center of the
shaft.
Select Corner Rectangle from the
Rectangle types drop-down menu and sketch
the rectangle, snapping to the references.
Edit the dimensions as shown.
8. Click OK .
9. Orient to the Standard Orientation.
10. Click Shading .

Module 10 | Page 8 2014 PTC


Task 4: Cut the step on the crankshaft using the sketch.

1. Click Revolve .
2. Click Remove Material .

3. Click Complete Feature .


4. Click Save from the Quick Access toolbar.
5. Click File > Manage Session > Erase Current
> Yes to erase the model from memory.

This completes the exercise.

2014 PTC Module 10 | Page 9


Exercise 4: Creating Profile Rib Features

Objectives
After successfully completing this exercise, you will be able to:
Create profile rib features.

Scenario
Rib features are used to add structural strength to parts. Product testing has indicated that the
engine block part needs an additional rib to strengthen it against premature failure. Your assignment
is to add the additional profile rib feature.

Close Window Erase Not Displayed


Rib\Profile ENG_BLOCK.PRT

Task 1: Create a profile rib on ENG_BLOCK.PRT .

1. Enable only the following Datum Display types:


.
2. Select datum plane RIB and click Sketch
from the Datum group.
3. Enable only the following Sketcher Display
types: .
4. Click Sketch View from the In Graphics
toolbar.
5. Disable Plane Display .
6. Click References from the Setup group.
Select the three silhouette edges shown
(highlighted in green in the following figure) as
references, resulting in a total of five specified
references.
Click Close in the References dialog box.

Module 10 | Page 10 2014 PTC


7. Zoom in and sketch, as shown in the following
figure:
Right-click and select Line Chain . Sketch
a horizontal line starting from the diagonal
reference, stopping short of the vertical
reference.
Right-click and select 3-Point / Tangent End
. Start the arc on the unfinished end of
the sketched line, and finish on the vertical
reference. Middle-click to stop sketching arcs.
Right-click and select Dimension . Select
the left end of the arc and the horizontal
reference, and place the first dimension.
Type 2 and press ENTER.
Select the horizontal line you sketched and
the horizontal reference, and place the second
dimension.
Type 5 and press ENTER.
Click One-by-One from the Operations
group and edit the arc radius to 6.

8. Click OK from the ribbon.


9. Middle-click and drag to orient the model.

10. With the sketch still selected, select Profile Rib


from the Rib types drop-down menu. Select
the References tab. Click Flip and then edit the
thickness to 2. Click Change Thickness Option
as necessary to set the rib feature symmetric
about the sketch.

2014 PTC Module 10 | Page 11


11. Click Complete Feature .
12. Click Save from the Quick Access toolbar.
13. Click File > Manage Session > Erase Current
> Yes to erase the model from memory.

This completes the exercise.

Module 10 | Page 12 2014 PTC


Module 12
Creating Sweeps and Blends

2014 PTC Module 12 | Page 1


Exercise 1: Creating a Sweep Through a 3-D Curve

Objectives
After successfully completing this exercise, you will be able to:
Create a sweep through a 3-D curve.

Scenario
You are assigned to create the cord of the coil part that connects the main body of the coil to the
spark plug adapter. Sweep a solid along the existing 3-D curve.

Close Window Erase Not Displayed


Sweep\Open-Trajectory_Solid COIL.PRT

Task 1: Create a sweep using the curve as a trajectory.

1. Disable all Datum Display types.


2. Select Sweep from the Sweep types
drop-down menu in the Shapes group.
3. Select the 3-D curve as the trajectory in the
graphics window.
4. Click Create Section from the dashboard.
5. Enable only the following Sketcher Display
types: .

6. Sketch as shown:
Right-click and select Circle .
Sketch a circle at the intersection of the
centerlines.
Double-click the dimension and edit the
diameter to 5.5.
Click OK .

Module 12 | Page 2 2014 PTC


7. Click Complete Feature and click in the
background to de-select all geometry.
8. In the ribbon, select the View tab.
9. Select Appearances Manager from the
Appearance Gallery types drop-down menu.
10. Load the appearance.dmt if necessary, and
click Close.
11. Select the solid_black appearance sphere from
the Appearance Gallery types drop-down menu.
12. Complete the following:
Press CTRL and select the front and back
sweep surfaces.
Click OK in the Select dialog box.
13. Click Save from the Quick Access toolbar.
14. Click File > Manage Session > Erase Current
> Yes to erase the model from memory.

This completes the exercise.

2014 PTC Module 12 | Page 3


Exercise 2: Creating a Blend Feature on FLYWHEEL.PRT
and Embedding the Orientation Datum

Objectives
After successfully completing this exercise, you will be able to:
Create blend features.
Embed the orientation datum plane.

Scenario
You are assigned to create the initial blade of the flywheel. The design specification document
recommends using a thin protrusion to create this feature.

Close Window Erase Not Displayed


Blend\Sketch-Sections_Solid FLYWHEEL.PRT

Task 1: Insert a thin blend on the FLYWHEEL.PRT.

1. Enable only the following Datum Display types:


.
2. Create a datum plane as shown:
Click Plane .
Select datum plane FRONT. Press CTRL and
select axis CRANK.
Double-click the angle and edit it to 11.25 or
-11.25 to obtain the direction shown.
Select the Properties tab in the Datum Plane
dialog box. Type ANGLE as the Name, and
click OK.
3. Click in the background to de-select the datum
plane.

4. In the ribbon, click the Shapes group drop-down menu and select Blend .
5. In the dashboard, click Thicken Sketch .
Select the Sections tab and verify that Sketched sections is selected.
6. Right-click in the graphics window and select Define Internal Sketch.
7. Select datum plane TOP as the sketching plane.
8. In the Sketch dialog box, select Bottom as the Orientation and select datum plane ANGLE
to face the bottom of the window.
Click Sketch.

Module 12 | Page 4 2014 PTC


9. Enable only the following Sketcher Display
types: .
10. Begin the sketch as shown:
Select the CRANK axis as a reference.
Click Close in the References dialog box.
Disable Axis Display and Plane Display
.
Click Shading With Edges .
Click Sketch View .
Click Construction Mode from the
Sketching group to enable it.
Right-click in the graphics window and select
Circle .
Sketch two construction circles.
Click Normal and dimension the diameters,
editing the values as shown.
11. Click Construction Mode to disable it.
12. Sketch the first blend section as shown:
Right-click and select 3-Point / Tangent End
. Sketch an arc as shown.
Right-click and select Dimension .
Dimension the sketch and edit the values as
shown.
13. Click OK .

14. Sketch and constrain the second blend section


as shown:
Right-click in the graphics window and select
Insert.
Right-click and select Sketch to begin
sketching Section 2.
Right-click and select 3-Point / Tangent End
. Sketch the smaller arc as shown.
Click Coincident from the Constrain group
and constrain the right arc endpoint coincident
to the right arc endpoint from the first sketched
section.
In the Resolve Sketch dialog box, select the
Point On Entity constraint and click Delete.
Click Tangent from the Constrain group
and constrain the arc tangent to the first
sketched section.
Click One-by-One and edit the radius
dimension to 11.
Click OK from the ribbon.

2014 PTC Module 12 | Page 5


15. Press CTRL+D to orient to the Standard
Orientation.
16. in the dashboard, type 2.1 as the thickness.

17. Enable Plane Display and select Shading


from the Display Types drop-down menu in
the In Graphics toolbar.
18. In the dashboard, select the Sections tab.
Select Section 2.
Select Reference and select datum plane
FIN_HEIGHT.
19. Click Complete Feature .

Task 2: Embed the datum plane ANGLE into the blend feature.

1. Click and hold the datum plane ANGLE in the


model tree. Drag the feature and drop it on the
Blend feature.
2. Expand the Blend feature.
3. Notice that the datum plane ANGLE is now
embedded in the blended protrusion feature and
hidden.

Creating the blend on an angular datum and then embedding the datum enables the
features to be easily patterned with the Dimension option. The angular datum plane is
not necessary when patterning with the Axis option.

Module 12 | Page 6 2014 PTC


4. Click Save from the Quick Access toolbar.
5. Click File > Manage Session > Erase Current > Yes to erase the model from memory.

This completes the exercise.

2014 PTC Module 12 | Page 7


Module 12 | Page 8 2014 PTC
Module 13
Creating Holes, Shells, and Draft

2014 PTC Module 13 | Page 1


Exercise 1: Common Dashboard Options: Hole Depth

Objectives
After successfully completing this exercise, you will be able to:
Specify hole cut depths.

Scenario
Edit the definition of a hole feature and test the available depth options. Get an good understanding
of each depth option by observing the results each option produces.

Close Window Erase Not Displayed


Hole\Depth CYLINDER.PRT

Task 1: Edit the depth of a hole feature.

1. Enable only the following Datum Display types:


.
2. Select HOLE_2 in the model tree. Right-click
and select Edit Definition . Notice that the
current depth option is Blind.
3. Drag the depth handle to 20, editing the value
if necessary, and click Preview Feature
from the Hole dashboard. Then click Resume
Feature from the dashboard.
4. Cursor over the depth handle. Right-click and
select To Next. Click Preview Feature from
the dashboard. Then click Resume Feature
from the dashboard.
5. Cursor over the depth handle. Right-click and
select Through All. Click Preview Feature
from the dashboard. Then click Resume
Feature from the dashboard.
6. Cursor over the depth handle. Right-click and
select To Selected. Middle-click to spin the
model and select the bottom surface of the fin,
as shown. Click Complete Feature .
Depth options can also be specified by
selecting the flyout depth options from the
dashboard.

7. Click Save from the Quick Access toolbar.


8. Click File > Manage Session > Erase Current
> Yes to erase the model from memory.

This completes the exercise.

Module 13 | Page 2 2014 PTC


Exercise 2: Creating Coaxial Holes

Objectives
After successfully completing this exercise, you will be able to:
Create axes through cylinders.
Create linear axes.
Create coaxial holes.

Scenario
To assemble the drill, you must create holes on a number of parts that act as bolt interfaces. You
create the holes with predefined shapes that remove material on the front engine block to enable
you to insert bolts during assembly.

Close Window Erase Not Displayed


Hole\Coaxial ENG_BLOCK_FRONT.PRT

Task 1: Create a datum axis through a cylinder and a coaxial hole feature.

1. Enable only the following Datum Display type:


.
2. From the Datum group, click Axis .
Select the cylindrical surface shown in the
upper figure as the reference.
Select the Properties tab from the Datum
Axis dialog box and type GEARBOX1 as the
Name.
Click OK.
The axis should remain selected between
these steps. Do not click in the graphics
window, as this will de-select it.

2014 PTC Module 13 | Page 3


3. With datum axis GEARBOX1 still selected
(highlighted in green), click Hole from the
Engineering group.
Press CTRL and select the surface shown as
the second placement reference.
Click To Next from the dashboard.
Edit the diameter to 6 and click Complete
Feature .
The datum axis GEARBOX1 serves
as the first placement reference. The
surface reference is the second placement
reference. The surface reference provides
you with a starting location defining the
depth of the hole.

4. Select the axis GEARBOX1 from the model tree


and drag it onto the Hole 1 feature.
5. Expand the Hole 1 feature in the model tree
and notice that the axis GEARBOX1 is now
embedded in the hole feature and hidden.
Embedding the axis GEARBOX1 in the hole
feature simplifies the model tree and adds
additional design intent to the model. Note
that all embedded datums are automatically
assigned a hidden display status.

Task 2: Create a second coaxial hole feature using an embedded datum axis.

1. From the Engineering group, click Hole .


2. In the dashboard, click Datum and select
Axis .
Select the cylindrical surface shown in the
figure as the reference.
Click OK to complete the feature.

Module 13 | Page 4 2014 PTC


3. Click Resume Feature to continue creating
the hole feature.
Press CTRL and select the surface shown as
the second placement reference.
Click To Next from the dashboard.
Edit the diameter to 6 and click Complete
Feature .

4. Expand the Hole 2 feature in the model tree


and notice that the axis was created as an
embedded datum.

Task 3: Create a linear axis and a coaxial hole feature.

1. Enable Plane Display .


2. Click Hole .
3. In the dashboard, click Datum and select
Axis . Select the surface in the location
shown in the following figure. Right-click and
select Offset References. Press CTRL and
select the FRONT and RIGHT datum planes
from the model tree.
4. Double-click each distance dimension and type
17.50. Select the Properties tab from the Datum
Axis dialog box and type CYLINDER1 as the
Name. Click OK to complete the feature.

2014 PTC Module 13 | Page 5


5. Disable Plane Display .
6. Click Resume Feature to continue creating
the hole feature.
Press CTRL and select the surface shown as
the second placement reference.
Edit the diameter to 5 and the depth to 10,
then click Complete Feature .
You can edit values from the dashboard or
directly from the model.

7. Click Save from the Quick Access toolbar.


8. Click File > Manage Session > Erase Current > Yes to erase the model from memory.

This completes the exercise.

Module 13 | Page 6 2014 PTC


Exercise 3: Creating Linear Holes
Objectives
After successfully completing this exercise, you will be able to:
Create linear holes.

Scenario
To assemble the drill, you must create holes on parts that act as bolt interfaces. You create the
holes with predefined shapes that remove material on the rear engine block to enable you to insert
bolts during assembly.
Close Window Erase Not Displayed
Hole\Linear ENG_BLOCK_REAR.PRT
Task 1: Create a linear hole feature.

1. Disable all Datum Display types.


2. From the Engineering group, click Hole and
select the surface shown as the placement
reference.
3. Right-click and select Offset References
Collector. Press CTRL and select datum planes
FRONT and RIGHT from the model tree as the
offset references.
You can also drag the reference handles to
snap to reference.

4. Drag the location, diameter, and depth handles


to the approximate positions shown.
5. Edit the diameter to 5 and the depth to 10 in
the dashboard. Then select the Placement tab
in the dashboard and type 17.5 for the offset
values. Click Complete Feature .
You can edit values from the dashboard or
directly from the model.

To move the hole to the opposite side of the


model, you can either drag the hole using the
handles or you can type a negative value.
The negative value moves the hole to the
opposite side of the RIGHT datum plane.

6. Click Save from the Quick Access toolbar.


7. Click File > Manage Session > Erase Current
> Yes to erase the model from memory.

This completes the exercise.

2014 PTC Module 13 | Page 7


Exercise 4: Creating Radial and Diameter Holes

Objectives
After successfully completing this exercise, you will be able to:
Create a radial hole on a cylindrical surface.

Scenario
Add an additional hole to the chuck part for the chuck key.

Close Window Erase Not Displayed


Hole\Radial_Diameter CHUCK.PRT

Task 1: Create a radial hole feature.

1. Enable only the following Datum Display type:


.
2. From the Engineering group, click Hole .
Select the cylindrical surface in the location
shown.
It is important to select the surface in the
quadrant shown below, to ensure that the
angle is measured properly.

3. In the graphics window, right-click and select


Offset References Collector.
Press CTRL and select datum planes FRONT
and TOP from the model tree.
Select the Placement tab from the dashboard.
Edit the angle to 60 and the axial distance to
52.5.
Edit the diameter to 5.5 and the depth to 8,
as shown.

Module 13 | Page 8 2014 PTC


4. Click Complete Feature .
5. Disable Plane Display .
6. Click Save from the Quick Access toolbar.
7. Click File > Manage Session > Erase Current
> Yes to erase the model from memory.

This completes the exercise.

2014 PTC Module 13 | Page 9


Exercise 5: Shelling the Fuel Tank

Objectives
After successfully completing this exercise, you will be able to:
Create shell features that remove single surfaces.

Scenario
To complete the drills fuel tank, you hollow out the part and create an opening using a shell which
provides the drill with a gasoline storage location.

Close Window Erase Not Displayed


Shell\Shell FUEL_TANK_SHELL.PRT

Task 1: Create a shell feature.

1. Disable all Datum Display types.


2. From the Engineering group, click Shell .
3. Select the surface for the shell to remove, as
shown.
4. Edit the shell thickness to 1 and click Preview
Feature from the dashboard.

5. Click Resume Feature and edit the thickness


to 3.
6. Click Complete Feature .

7. Click Save from the Quick Access toolbar.


8. Click File > Manage Session > Erase Current > Yes to erase the model from memory.

This completes the exercise.

Module 13 | Page 10 2014 PTC


Module 14
Creating Rounds and Chamfers

2014 PTC Module 14 | Page 1


Exercise 1: Creating Rounds on the Rear Engine Block 1

Objectives
After successfully completing this exercise, you will be able to:
Create an edge to surface round.

Scenario
Create an edge to surface round on a boss that is part of the engine block.

Close Window Erase Not Displayed


Round\Surface-Edge ENG_BLOCK_REAR_1.PRT

Task 1: Attempt an edge chain round on ENG_BLOCK_REAR_1.PRT.

1. Disable all Datum Display types.


2. Click Named Views from the In Graphics
toolbar and select ROUND.
3. Select Round from the Round types
drop-down menu in the Engineering group.
Press CTRL and select the two edges shown.
Edit the radius to 2.
Click Preview Feature from the Round
dashboard. Notice that the Troubleshooter
dialog box appears because the rounds
overlap.
Click Cancel in the Troubleshooter dialog box
and click Yes.
Click Cancel Feature from the Round
dashboard. Click Yes.

Task 2: Create a surface-to-edge round on ENG_BLOCK_REAR_1.PRT.

1. Click Round .
Select the surface shown.
Press CTRL and select the edge shown.
Edit the radius to 4.

Module 14 | Page 2 2014 PTC


2. Click Complete Feature from the Round
dashboard.
3. Click Save from the Quick Access toolbar.
4. Click File > Manage Session > Erase Current
> Yes to erase the model from memory.

This completes the exercise.

2014 PTC Module 14 | Page 3


Exercise 2: Creating Rounds on the Gearbox Front

Objectives
After successfully completing this exercise, you will be able to:
Create basic rounds.

Scenario
In order to reduce stresses and remove sharp edges, add rounds to the front gearbox.

Close Window Erase Not Displayed


Round\Gearbox GEARBOX_FRONT.PRT

Task 1: Create the first of three edge round features on GEARBOX_FRONT.PRT.

1. Disable all Datum Display types.


2. Select Round from the Round types
drop-down menu in the Engineering group and
select the large circular edge as shown.
Drag the radius handle to 5.

3. Press CTRL and select the small circular edge


to add it to the round set.
4. Type 3 as the radius in the Round dashboard,
and notice that both rounds update.
5. Select the Sets tab in the Round dashboard.
Select the Edge:F7(PROTRUSION) reference,
right-click and select Remove.
You can also de-select references by
pressing CTRL and selecting the reference.

6. Click Complete Feature from the Round


dashboard.

7. Click Round and select the large circular


edge as shown.
8. Edit the radius to 2 and click Complete Feature
.

Module 14 | Page 4 2014 PTC


Task 2: Create the second of three edge round features on GEARBOX_FRONT.PRT.

1. Click Named Views from the In Graphics


toolbar and select 3D_BACK.
2. Click Round , select the edge shown, and
edit its radius to 2.
3. Click Complete Feature .

4. Click Round .
Select the surface highlighted in green, as
shown.
Press CTRL and select the edge shown.
Drag the radius handle to 6 and click
Complete Feature .

Task 3: Create the final edge round feature on GEARBOX_FRONT.PRT.

1. Select the RIB_ROUND from the model tree,


right-click, and select Edit Definition .
Press CTRL and select the two additional
edge references shown.

2014 PTC Module 14 | Page 5


2. Click Complete Feature .
3. Click Save from the Quick Access toolbar.
4. Click File > Manage Session > Erase Current
> Yes to erase the model from memory.

This completes the exercise.

Module 14 | Page 6 2014 PTC


Exercise 3: Creating Rounds on the Rear Engine Block 2

Objectives
After successfully completing this exercise, you will be able to:
Create a surface to surface round.

Scenario
Create a surface to surface round on a boss that is part of the engine block.

Close Window Erase Not Displayed


Round\Surface-Surface ENG_BLOCK_REAR_2.PRT

Task 1: Create a surface to surface round on ENG_BLOCK_REAR_2.PRT.

1. Disable all Datum Display types.


2. Click Named Views from the In Graphics
toolbar and select ROUND.
3. Select Round from the Round types
drop-down menu in the Engineering group.
Press CTRL and click the two surfaces, as
shown.
Edit the radius to 4.

4. Click Complete Feature from the Round


dashboard.
5. Click Save from the Quick Access toolbar.
6. Click File > Manage Session > Erase Current
> Yes to erase the model from memory.

This completes the exercise.

2014 PTC Module 14 | Page 7


Exercise 4: Creating Full Rounds on the Connecting Rod
Objectives
After successfully completing this exercise, you will be able to:
Create full rounds.

Scenario
In order to reduce stresses and remove sharp edges, add rounds to the connecting rod.
Close Window Erase Not Displayed
Round\Full CONNECTING_ROD.PRT
Task 1: Create a full round on CONNECTING_ROD.PRT.

1. Disable all Datum Display types.


2. Select Round from the Round types
drop-down menu in the Engineering group.
3. Press CTRL and select the two edges shown.

4. Right-click and select Full round.


5. Click Complete Feature .

Task 2: Create edge rounds on CONNECTING_ROD.PRT.

1. Click Round .
2. Press CTRL and select the two edges as shown.
3. Edit the radius to 2.

4. Click Complete Feature .


5. Click Save from the Quick Access toolbar.
6. Click File > Manage Session > Erase Current
> Yes to erase the model from memory.

This completes the exercise.

Module 14 | Page 8 2014 PTC


Exercise 5: Creating Chamfers on the Crankshaft

Objectives
After successfully completing this exercise, you will be able to:
Create chamfers.

Scenario
In this exercise, you create multiple chamfers on the crankshaft.

Close Window Erase Not Displayed


Chamfer\Sets CRANKSHAFT.PRT

Task 1: Create the first of three chamfer features on CRANKSHAFT.PRT.

1. Disable all Datum Display types.


2. Select Edge Chamfer from the Chamfer
types drop-down menu in the Engineering group.
3. Select the far-left circular edge, and edit its value
to 2 using the Chamfer dashboard.

4. Select the far-right circular edge of the crankshaft


(without pressing CTRL).
5. Drag the distance handle to 1, then edit its value
to 2, as shown.
6. Click Complete Feature .
The chamfer sets are independent of each
other. Selecting references without pressing
CTRL creates independent sets.
Selecting while pressing CTRL
adds/removes references to the same
set.

Task 2: Create the second of three chamfer features on CRANKSHAFT.PRT.

1. Select Edge Chamfer and select the edge


shown.
Select the D1 x D2 dimension scheme in the
dashboard.
Edit D1 to 2 and D2 to 3 in the dashboard.
Click Interchange Distances .
Click Preview Feature in the dashboard.

2014 PTC Module 14 | Page 9


2. Click Resume Feature .
Select the Angle x D dimension scheme in
the dashboard.
Click Switch Surfaces .
Edit the angle to 15 and the distance to 3 by
double-clicking the model dimensions.
Click Complete Feature .

Task 3: Create the final chamfer feature on CRANKSHAFT.PRT.

1. Select Edge Chamfer .


Press CTRL and select the two edges shown.
Edit the chamfer distance to 2.
Click Complete Feature .
Unlike the previous chamfers, this one has
added material.

2. Click Save from the Quick Access toolbar.


3. Click File > Manage Session > Erase Current > Yes to erase the model from memory.

This completes the exercise.

Module 14 | Page 10 2014 PTC


Module 15
Project I

2014 PTC Module 15 | Page 1


Objective 1: Creating the PISTON_PIN.PRT

Scenario
ACME Incorporated develops and markets several consumer, industrial, and defense goods. The
Light Industrial Division of ACME creates a number of products, including industrial fans, heating,
air conditioning, and pumps. You work for the Light Industrial Division of ACME Inc., which has
recently started using Creo Parametric for its product designs.
Upon returning from Creo Parametric training, you are assigned to create the AC-40 Air Circulator.
You apply the skills learned in previous topics of this course to create the final assembly and
components of the air circulator.

Close Window Erase Not Displayed


Projects\Intro-1_working CREATE NEW

Task 1: Create the piston pin part.

1. Create a new part named PISTON_PIN.PRT.


2. Enable only the following Datum Display types:
.
3. Create the extrude feature, as shown.
4. Save the model and close the window.
You must center the model on datum plane
FRONT.

Use the mmns_part_solid template for this


and all models in this project.

To help verify the correct datum entities,


enable datum tag display for this project.

This completes the objective.

Module 15 | Page 2 2014 PTC


Objective 2: Creating the PISTON.PRT
Task 1: Create the piston part and extrude the main body.

1. Create a new part named PISTON.PRT.


2. Create the extrude feature, as shown.
Use the mmns_part_solid template for this
and all models in this project.

Task 2: Hollow the piston to make room for the connecting rod.

1. Remove material, as shown.


2. Rename the cut as OVAL_CUT.
The sketch should be symmetric about the
vertical reference.
Control the upper wall thickness of
the piston by placing the sketch on an
embedded datum plane, offset from datum
plane TOP.
Regardless of the length of the original
protrusion, the cut should always extrude
though the entire model.

Task 3: Remove material from the bottom of the piston.

1. Remove material, as shown.

2014 PTC Module 15 | Page 3


Task 4: Create a hole to attach the piston pin.

1. Create a hole through the model.


The hole should be placed on datum plane
FRONT and its depth should extend through
the entire model in both directions. It should
be aligned to datum plane RIGHT.

Task 5: Apply an appearance to the piston.

1. Apply the Blue_Dark appearance to the model.


2. Save the model and close the window.

This completes the objective.

Module 15 | Page 4 2014 PTC


Objective 3: Creating the CONNECTING_ROD.PRT
Task 1: Create the connecting rod and extrude the main body.

1. Create a new part named CONNECTING_ROD.


PRT.
Use the mmns_part_solid template for this
and all models in this project.
2. Create the extrude feature, as shown. Create
the sketch on datum plane FRONT, and extrude
it symmetric about datum plane FRONT.
Sketch two circles, two tangent lines, and
then use dynamic trim to create the sketch.
Because this is the first feature of the model,
use Modify with the Lock Scale option to
modify the dimension values.

Task 2: Create extrude features at both ends of the connecting rod.

1. Create two extrude features, one at each end of


the connecting rod. The extrude features should
be symmetric about datum plane FRONT.

Task 3: Create holes at each end of the connecting rod.

1. Create coaxial holes at both ends of the


connecting rod. The hole depths should extend
through the entire model.
Create embedded axes to locate each hole.

2014 PTC Module 15 | Page 5


Task 4: Create a round to strengthen the connecting rod.

1. Create a round feature, as shown.


Each of the four rounded edges should be
driven by the same dimension.

Task 5: Create a lubrication hole.

1. Create a radial hole on the right end of the


model. The hole depth should only extend
through the next surface.

Task 6: Apply an appearance to the connecting rod.

1. Apply the Blue_Dark appearance to the model.


2. Save the model and close the window.

This completes the objective.

Module 15 | Page 6 2014 PTC


Objective 4: Creating the CRANKSHAFT.PRT
Task 1: Create the crankshaft and extrude the main body.

1. Create a new part named CRANKSHAFT.PRT.


Use the mmns_part_solid template for this
and all models in this project.
2. Create the extrude feature, as shown.

Task 2: Create the crankshaft lobe.

1. Create an extrude feature, as shown.


Use a construction circle to control the outer
diameter of the lobe and a vertical centerline
to imply symmetry.

2014 PTC Module 15 | Page 7


Task 3: Create the crankshaft pin.

1. Create an extrude feature, as shown.

Task 4: Create a hole to hollow out a portion of the crankshaft.

1. Create a hole, as shown.


The hole should be coaxial to the original
cylindrical feature.

Module 15 | Page 8 2014 PTC


Task 5: Create an opening for intake gases to enter the crankcase.

1. Remove material, as shown.


2. Rename this cut as INTAKE_CUT.
The cut's sketch plane should be embedded
in the cut feature.
The cut should extend through only one
side of the crankshaft.

Task 6: Create a cut that is used to interlock with the impeller.

1. Remove material, as shown.


The cut should not affect the overall length
of the model.

2014 PTC Module 15 | Page 9


Task 7: Create a cut to form a circular shaft for threads.

1. Remove material, as shown.


The cut should not affect the overall length
of the model.

Task 8: Bevel the edges of the intake cut and the end of the crankshaft.

1. Create a chamfer, as shown.


Both legs of the chamfer should have the
same dimension (D x D).

Task 9: Apply an appearance and save the orientation.

1. Apply the Gray_Dark appearance to the model.


2. Save the current orientation to an orientation
named 3D.
3. Save the model and close the window.

This completes the objective.

Module 15 | Page 10 2014 PTC


Objective 5: Creating the ENGINE_BLOCK.PRT
Task 1: Create the engine block part and revolve the main body of the model.

1. Create a new part named ENGINE_BLOCK.PRT


Use the mmns_part_solid template for this
and all models in this project.
2. Create the revolve feature, as shown.

Task 2: Create datum features to use as references when constructing other features.

1. Create a datum plane offset from datum plane


FRONT. Rename the plane to CTR.
2. Create a datum axis at the intersection of datum
planes RIGHT and CTR. Rename the axis to
CYL.
Datum plane CTR and axis CYL are used
later in the project as references for other
features.

2014 PTC Module 15 | Page 11


Task 3: Create the engine block cylinder.

1. Create a straight three-section parallel blend


protrusion, as shown.
Sketch on datum plane TOP, and
select datum plane CTR as a horizontal
dimensioning reference. The second and
third blend sections are identical. Specify
Straight as the Option.

Module 15 | Page 12 2014 PTC


Task 4: Add rounds to shape the cylinder.

1. Create a round on the four edges of the blend.

2. Create a single round feature, as shown.

2014 PTC Module 15 | Page 13


Task 5: Create a protrusion to use as a mounting flange.

1. Create an extrude feature, as shown.


Select datum plane CTR and the silhouette
edges of the revolve feature as references.
The sketch should be symmetrical about
datum plane CTR and mirrored about the
vertical centerline.
The depth of the feature should be
symmetric about datum plane TOP.

Task 6: Create mounting bolt holes.

1. Create coaxial holes, as shown.


Create an embedded datum axis for each
hole. The datum axes should be placed
through the mounting flange arc centers.

Module 15 | Page 14 2014 PTC


2. Mirror the two holes to the other side of the
engine block.
3. Group the extrude, two holes, and the mirror
feature.
4. Rename the group as MOUNT1 .

Task 7: Create holes for the crankshaft, crankcase, and cylinder bore.

1. Create a hole through the engine block.

2. Create another hole, as shown.

2014 PTC Module 15 | Page 15


3. Create the cylinder bore hole, as shown.
4. Rename this hole as BORE.
5. Save the model and close the window.

This completes the objective.

Module 15 | Page 16 2014 PTC


Objective 6: Creating the IMPELLER_HOUSING.PRT
Task 1: Create the impeller housing and extrude the main body of the model.

1. Create a new part named IMPELLER_


HOUSING.PRT.
Use the mmns_part_solid template for this
and all models in this project.
2. Create an extrude feature, as shown.

Task 2: Begin creation of the exhaust geometry.

1. Create a 90 revolve feature, as shown.


Create the sketch on datum plane TOP.
The sketch should be symmetric about the
horizontal reference.

2014 PTC Module 15 | Page 17


Task 3: Create the exhaust geometry.

1. Create a smooth parallel blend feature, as


shown.
This blend contains three symmetric
rectangular sketches, each 25 mm apart.
The first section should use the edges from
the revolve feature.
Be sure that the start point for each
rectangle is at the same location and
direction.

Task 4: Shape the exhaust for maximum airflow.

1. Create round features, as shown.

Module 15 | Page 18 2014 PTC


Task 5: Hollow out the housing.

1. Create a shell feature, as shown.


Two surfaces are to be removed using this
shell feature.

Task 6: Create a hole for the impeller collar.

1. Create a hole feature, as shown.

2014 PTC Module 15 | Page 19


Task 7: Create the bolting flange.

1. Create an extrude feature, as shown.


The extrude feature should extend over the
model, as shown.

Task 8: Create the mounting flange.

1. Create an extrude feature, as shown.


The extrude feature should extend
symmetrically in both directions from the
datum plane FRONT.

Module 15 | Page 20 2014 PTC


Task 9: Create an attach hole in the mounting flange.

1. Create the hole, as shown.

Task 10: Create a profile rib to strengthen the mounting flange.

1. Create the profile rib feature on an embedded


datum, as shown. The rib should be symmetric
about the embedded datum.
2. Save the model and close the window.

This completes the objective.

2014 PTC Module 15 | Page 21


Objective 7: Creating the IMPELLER.PRT
Task 1: Create the impeller and revolve the main body of the model.

1. Create a new part named IMPELLER.PRT.


Use the mmns_part_solid template for this
and all models in this project.
2. Create a revolve feature, as shown.
Sketch on datum plane RIGHT with datum
plane TOP facing right.

Task 2: Create the interlock geometry.

1. Extrude the cut feature, as shown. Create the


sketch on the small circular surface on the back
of the model, orienting datum plane TOP so that
it faces the top.

Module 15 | Page 22 2014 PTC


Task 3: Create the first impeller blade.

1. Create an extrude feature with the thicken


option, as shown.
2. Rename the extrude to BLADE.
Create the sketch on datum plane FRONT
so that it extrudes through the model.
Dimension the arc using an arc angle
dimension.

Task 4: Round the sharp corner of the blade.

1. Create a round feature, as shown.


2. Rename the round feature to BLADE_ROUND.

2014 PTC Module 15 | Page 23


Task 5: Create an outer support for the blade.

1. Create an extrude feature, as shown.


The depth of this feature should extend from
the end of the blade, inward over the model.
2. Save and close the model.

This completes the objective.

Module 15 | Page 24 2014 PTC


Objective 8: Creating the FRAME.PRT
Task 1: Create the frame part and trajectory for the main rail.

1. Create a new part named FRAME.PRT.


Use the mmns_part_solid template for this
and all models in this project.
2. Create a sketch feature, as shown. This sketch
can be used as the trajectory for a swept
protrusion.

2014 PTC Module 15 | Page 25


Task 2: Sweep an I-profile section along the sketch trajectory.

1. Create a constant section sweep protrusion, as


shown.
Select the predefined I-profile from the
Palette as the section to sweep. Relocate
the X Location handle to the midpoint of
the bottom edge. The section should be
symmetric about the vertical reference and
above the horizontal reference and trajectory.

Task 3: Sweep another I-profile for the engine support.

1. Create a sketch feature on an embedded datum


plane, as shown. This feature is the trajectory
for your next sweep.
Use datum plane FRONT as a dimensioning
reference.

Module 15 | Page 26 2014 PTC


2. Create a swept protrusion, as shown.
3. Save the model and close the window.

This completes the objective.

2014 PTC Module 15 | Page 27


Objective 9: Creating the BOLT.PRT
Task 1: Create the bolt and revolve the main body.

1. Create a new part named BOLT_5.PRT.


Use the mmns_part_solid template for this
and all models in this project.
2. Create the revolve feature, as shown.

Task 2: Create a hex socket cut.

1. Remove material, as shown.


Select the predefined 6sided Hexagon
section from the Palette as the section
to extrude.

Module 15 | Page 28 2014 PTC


Task 3: Create finishing features.

1. Create a round and chamfer, as shown.


2. Apply the Black appearance to the bolt.
3. Save the model.

Task 4: Create two additional bolts of different lengths.

1. Save a copy of the part BOLT_5.PRT. Rename


it as BOLT_8.PRT.
2. Close the window.
3. Open the new part BOLT_8.PRT.
4. Edit the length of the model from 5 to 8 and save
the model.

2014 PTC Module 15 | Page 29


5. Save a copy of the part BOLT_8.PRT. Rename
it as BOLT_12.PRT.
6. Close the window.
7. Open the new part BOLT_12.PRT.
8. Edit the length of the model from 8 to 12.
9. Save the model and close the window.

This completes the objective.

Module 15 | Page 30 2014 PTC


Module 16
Group, Copy, and Mirror Tools

2014 PTC Module 16 | Page 1


Exercise 1: Rotating a Copy of a Boss on the Engine
Block

Objectives
After successfully completing this exercise, you will be able to:
Copy features by rotation.

Scenario
In this topic, you will create a copy of a boss on the engine block.

Close Window Erase Not Displayed


Feature_Operations\Move_Rotate ENG_BLOCK_REAR.PRT

Task 1: Copy a boss on ENG_BLOCK_REAR.PRT.

1. Enable only the following Datum Display types:


.
2. Select Group BOSS_1 from the model tree.

3. Copy the BOSS_1 group, as shown:


With the BOSS_1 group still selected, click
Copy from the Operations group.
Select Paste Special from the Paste types
drop-down menu in the Operations group.
Select the Apply move/rotate
transformations to copies check box.
Click OK in the Paste Special dialog box.
Select Rotate from the dashboard and
select datum axis MAIN.
Drag the angle handle counterclockwise and
then type 120 for the angle in the dashboard.
Click Complete Feature from the
dashboard.

Module 16 | Page 2 2014 PTC


4. Expand Moved Copy 1 and Group
COPIED_GROUP in the model tree. Press
CTRL, select the datum plane and sketch,
right-click, and select Hide .
5. Select Moved Copy 1, right-click, and select
Rename. Type BOSS_2 and press ENTER.
6. Select the Group COPIED_GROUP from the
model tree, right-click, and select Edit .
Double-click the angle dimension and type 100.
7. Expand Group BOSS_1 and select the
BOSS_HOLE feature. Double-click the
diameter dimension and edit it to 5. Click in the
background twice to de-select all features.
8. Click Undo twice from the Quick Access
toolbar.

9. Click Save from the Quick Access toolbar.


10. Click File > Manage Session > Erase Current > Yes to erase the model from memory.

This completes the exercise.

2014 PTC Module 16 | Page 3


Exercise 2: Copying and Translating Carburetor
Features

Objectives
After successfully completing this exercise, you will be able to:
Copy features by translation.

Scenario
In this topic, you will create a copy of an attachment ear on the carburetor.

Close Window Erase Not Displayed


Feature_Operations\Move_Rotate CARBURETOR_1.PRT

Task 1: Copy and translate the features on CARBURETOR_1.PRT.

1. Enable only the following Datum Display types:


.
2. Select Group EAR from the model tree.

3. Copy the EAR group, as shown:


With the EAR group still selected, click Copy
from the Operations group.
Select Paste Special from the Paste types
drop-down menu in the Operations group.
Select the Apply move/rotate
transformations to copies check box.
Click OK in the Paste Special dialog box.
Click Translate from the dashboard and
select datum plane FRONT from the model
tree.
Drag the offset handle forward, type 23.5, and
press ENTER.
Click Complete Feature from the
dashboard.

Module 16 | Page 4 2014 PTC


4. Select the Moved Copy, right-click, and select
Rename. Type EAR2 and press ENTER.
5. Click Save from the Quick Access toolbar.
6. Click File > Manage Session > Erase Current
> Yes to erase the model from memory.

This completes the exercise.

2014 PTC Module 16 | Page 5


Exercise 3: Mirroring Selected Carburetor Features

Objectives
After successfully completing this exercise, you will be able to:
Mirror selected features.

Scenario
In this topic, you will create a copy of an attachment ear on the carburetor.

Close Window Erase Not Displayed


Feature_Operations\Mirror_Features CARBURETOR_2.PRT

Task 1: Mirror the features on CARBURETOR_2.PRT.

1. Enable only the following Datum Display types:


.
2. Mirror the EAR groups, as shown:
Press CTRL and select Group EAR and
feature EAR2 from the model tree.
Click Mirror from the Editing group.
Select datum plane RIGHT from the model
tree.
Click Complete Feature from the
dashboard.

3. Click Save from the Quick Access toolbar.


4. Click File > Manage Session > Erase Current > Yes to erase the model from memory.

This completes the exercise.

Module 16 | Page 6 2014 PTC


Module 17
Creating Patterns

2014 PTC Module 17 | Page 1


Exercise 1: Patterning Vents Using a Two Directional
Pattern

Objectives
After successfully completing this exercise, you will be able to:
Create direction patterns in two directions.

Scenario
You are assigned to increase the number of vents on the engine cover model. Complete this task
quickly using a directional pattern.

Close Window Erase Not Displayed


Pattern\Direction_Second ENGINE_COVER.PRT

Task 1: Pattern the side vents on ENGINE_COVER.PRT.

1. Disable all Datum Display types.


2. From the In Graphics toolbar, click Named
Views and select LEFT.
3. Select the SIDE_VENT group from the model
tree, right-click, and select Pattern .
4. Edit the pattern type to Direction in the
dashboard and create a pattern, as shown:
Select datum plane FRONT from the model
tree as the direction reference.
Right-click and select Direction 2 Reference.
Select datum plane TOP from the model tree.
Click Flip Second Direction in the
dashboard.
Edit the number of members in the first
direction to 3 and its spacing to 23.
Edit the number of members in the second
direction to 5 and its spacing to 8.

5. Click Complete Feature from the Pattern


dashboard.
6. Click Save from the Quick Access toolbar.
7. Click File > Manage Session > Erase Current
> Yes to erase the model from memory.

This completes the exercise.

Module 17 | Page 2 2014 PTC


Exercise 2: Creating Flywheel Blades Using an Axis
Pattern
Objectives
After successfully completing this exercise, you will be able to:
Create axial patterns.

Scenario
You are assigned to increase the number of blades on the flywheel model. Complete this task
quickly using an axial pattern.
Close Window Erase Not Displayed
Pattern\Axis_First FLYWHEEL.PRT

Task 1: Create an axis pattern on the FLYWHEEL.PRT.

1. Enable only the following Datum Display types:


.
2. Select Group BLADE from the model tree,
right-click, and select Pattern .
3. In the Pattern dashboard, edit the pattern type to
Axis and create a pattern, as shown:
Select datum axis CRANK from the model as
the axis reference.
Drag the angle handle on the model to
approximately 45.
Edit the number of members in the dashboard
from 4 to 6, and then drag the angle handle on
the model to approximately 30.
In the dashboard, click Set Angular Extent
.
Edit the number of members in the dashboard
from 6 to 16.

4. Click Complete Feature from the Pattern


dashboard. The pattern takes a few moments to
calculate.
5. Click Save from the Quick Access toolbar.
6. Click File > Manage Session > Erase Current
> Yes to erase the model from memory.

This completes the exercise.

2014 PTC Module 17 | Page 3


Exercise 3: Creating Exhaust Cuts in the Muffler Using a
Two Directional Axis Pattern

Objectives
After successfully completing this exercise, you will be able to:
Create axial patterns in two directions.

Scenario
You are assigned to create exhaust cuts in the muffler model. Complete this task quickly using an
axis pattern in two directions.

Close Window Erase Not Displayed


Pattern\Axis_Second MUFFLER_PATTERN.PRT

Task 1: Create a two directional axis pattern on MUFFLER_PATTERN.PRT.

1. Enable only the following Datum Display types:


.
2. From the In Graphics toolbar, click Named
Views and select TOP.
3. Select feature EXHAUST from the model tree,
right-click, and select Pattern .
4. Select the pattern type Axis in the dashboard
and create a pattern, as shown:
Select datum axis CENTER from the model
as the axis reference.
Edit the number of members in the first
direction from 4 to 6.
Click Set Angular Extent to evenly space
the instances.
Edit the number of members in the second
direction to 5 with a spacing of 3.

5. Click Complete Feature .


6. Disable Axis Display .

Module 17 | Page 4 2014 PTC


7. Select Pattern 1 of EXHAUST in the model tree,
right-click, and select Edit Definition .
Select the Dimensions tab from the
dashboard and activate the Direction 2
dimension collector.
Select the 0.5 dimension from the graphics
window and edit the Increment to 3.

8. Click Complete Feature .


9. Click Save from the Quick Access toolbar.
10. Click File > Manage Session > Erase Current
> Yes to erase the model from memory.

This completes the exercise.

2014 PTC Module 17 | Page 5


Exercise 4: Patterning Rounds on the Cylinder Fins
Using Reference Patterns

Objectives
After successfully completing this exercise, you will be able to:
Create reference patterns of features.

Scenario
You are assigned to add some rounds to the fins on the cylinder model. Complete this task quickly
using a Reference pattern.

Close Window Erase Not Displayed


Pattern\Reference_Features CYLINDER_2.PRT

Task 1: Create and reference pattern a round on the cooling fins of CYLINDER_2.PRT.

1. Disable all Datum Display types.


2. Create a full round, as shown:
From the In Graphics toolbar, click Named
Views and select FIN_CUT.
Select Round from the Round types
drop-down menu in the Engineering group.
Select the upper surface of the fin, as shown.
Press CTRL, right-click to query the underside
surface of the same fin, and select it.
Select the outer thin surface of the fin.
Click Complete Feature from the
dashboard.
3. Orient to the Standard Orientation.
4. With the previous round still selected, select
Pattern from the Pattern types drop-down
menu in the Editing group.

Module 17 | Page 6 2014 PTC


5. Notice that the Reference pattern type is
specified in the dashboard.
6. Click Complete Feature .
7. Click Save from the Quick Access toolbar.
8. Click File > Manage Session > Erase Current
> Yes to erase the model from memory.

This completes the exercise.

2014 PTC Module 17 | Page 7


Module 17 | Page 8 2014 PTC
Module 18
Measuring and Inspecting Models

2014 PTC Module 18 | Page 1


Exercise 1: Analyzing Design Models

Objectives
After successfully completing this exercise, you will be able to:
Configure the mass properties of a model.
Analyze components for distance, angles, surface area, and interferences.

Scenario
While designing a drill at your company, your manager asks you to confirm that the component
models adhere to the design specifications. For example, you need to verify the mass properties of
the fuel tank to confirm that the raw material estimates are correct. Next, you need to calculate the
surface area of the cylinder to confirm the proper thermal cooling. Also, the crankshaft's center of
gravity needs to be set along the axis of rotation. Finally, you need to check the engine assembly for
interferences between its components.

Close Window Erase Not Displayed


Analysis\Models FUEL_TANK.PRT

Task 1: Analyze the FUEL_TANK.PRT. Determine the volume of fluid that fits in a full tank. Also
determine the volume and mass of material to use when molding the part.

1. Disable all Datum Display types.


2. Click File > Prepare > Model Properties to
access the Model Properties dialog box. Notice
the current system of units specified in the Units
row of the Materials section.
3. Click Close in the Model Properties dialog box.
4. Select the Analysis tab from the ribbon.
5. Click Mass Properties from the Model
Report group.
6. Type the Density (kg/mm3) for the nylon fuel tank
as 1.2E-6 in the Mass Properties dialog box.
7. Click Preview in the Mass Properties dialog box.
Notice the computed volume and mass values.
8. Click OK in the Mass Properties dialog box.
9. Select the Model tab.
10. Click the Operations group drop-down menu and
select Resume > Resume All to resume the
SHELL TANK feature.

11. In the ribbon, select the Analysis tab.


12. Click Mass Properties .
Click Preview.
Notice that the values have updated, as
shown in the following figure.

Module 18 | Page 2 2014 PTC


13. Note that the volume of the fluid that fills the tank can be computed as follows:
VOLUME_BEFORE_SHELL VOLUME_AFTER_SHELL = FLUID_VOLUME 434,300
101,600 = 332,700 MM3 = 0.333 L.
14. The volume of material required to mold the tank model is approximately 101,600 mm3.
15. The mass of material required to mold the tank model is approximately 0.122 KG.
16. Click OK in the Mass Properties dialog box.
17. Click Save from the Quick Access toolbar.
18. Click File > Manage Session > Erase Current > Yes to erase the model from memory.

Task 2: Analyze the mass properties of the CYLINDER.PRT. Determine whether the
model has adequate surface area for air-cooling the engine. Thermal analysis has
indicated that the surface area must be greater than 50,000 mm2.

1. Click Open from the Quick Access toolbar.


Select the CYLINDER.PRT and click Open.

2. Click File > Prepare > Model Properties.


Notice the current system of units specified in
the Units row of the Materials section.
3. In the Materials section, click change in the
Mass Properties row. Type the Density (kg/mm3)
for the cylinder as 2.7E-6 and click OK in the
Mass Properties dialog box.
4. In the Materials section, click Info in the
Mass Properties row. Notice the surface area of
the model, as shown in the following figure.
5. The surface area of the model is approximately 64,290 mm2. This is greater than the stated
minimum requirement of 50,000 mm2 for air-cooling the engine. If the calculated value does
not meet the specification, we could modify the pattern to add additional cooling fins.
6. Close the Mass Properties Report dialog box and click Close in the Model Properties dialog
box.

2014 PTC Module 18 | Page 3


Task 3: Determine the diameter of the spark plug hole to ensure that sufficient material is present
to tap threads for a standard 16 mm spark plug. At least 2 mm smaller is required.

1. Select the Analysis tab from the ribbon.


2. In the Measure group, select Diameter from
the Measure types drop-down menu and select
the cylindrical surface of the spark plug hole, as
shown.
3. Note that the diameter is 13.75 mm. Since
this value is less than 14 mm, it meets the
requirement.

Task 4: Measure the area of the base of the cylinder to determine whether there is sufficient
surface area to adequately seal the cylinder to the crankcase. For an engine of this
displacement, the recommended gasket surface area is at least 850 mm2.

1. Orient the model, as shown.


2. Click Area from the Measure dialog box.
Select the engine block interface surface, as
shown.
3. Note that the area is 1,005.55mm2. Since this
value is greater than 850 mm2, it meets the
requirement.

Task 5: Measure the distance between the exhaust and intake surfaces.

1. Orient the model, as shown.


2. Click Distance from the Measure dialog box.
Edit the selection filter to Surface.
Select the exhaust interface surface, as
shown.

Module 18 | Page 4 2014 PTC


3. Reorient the model.
4. Press CTRL and select the carburetor interface
surface, as shown.
5. Note that the distance is 62mm.
6. Close the Measure dialog box.
7. Click Save .
8. Click File > Manage Session > Erase Current
> Yes to erase the model from memory.

Task 6: Analyze the mass properties of the CRANKSHAFT.PRT. Determine the


location of the center of gravity (COG) on the model.

1. Click Open .
Select the CRANKSHAFT.PRT and click
Open
2. Click File > Prepare > Model Properties.
Notice the current system of units specified in
the Units row of the Materials section.
3. In the Materials section, click change in the
Mass Properties row.
Type the Density (kg/mm3) for the steel
crankshaft as 7.8E-6 and click OK in the Mass
Properties dialog box.
Click Close in the Model Properties dialog
box.

4. Click Named Views and select RIGHT.


5. Select the Analysis tab from the ribbon.
6. Click Mass Properties and click Preview.
Note that the center of gravity (indicated by the
arrow) is below the axis of revolution (horizontal
axis of the other coordinate system).
The system displays the default coordinate
system as a reference when computing
model mass properties.
7. Click OK in the Mass Properties dialog box.

2014 PTC Module 18 | Page 5


Task 7: Measure the CRANKSHAFT.PRT. Determine the length of the keyway slot.
This length must be between 11 mm and 12 mm so the flywheel key does
not shear during normal operating conditions.

1. Reorient the model.


2. In the Measure group, select Length from
the Measure types drop-down menu.
Select the edge of the keyway.
3. Note that the distance is approximately 8.19mm.
This value does not meet the requirement.
4. In the Measure dialog box, click Save and
select Save Analysis.
Type KEYWAY_LENGTH in the text box field
and click OK.
Close the Measure dialog box.

5. Click Saved Analysis from the Manage


group to open the Saved Analysis dialog box.
Click All > Hide All. This hides the analysis from
the graphics window. Close the Saved Analysis
dialog box.
6. Select the KEYWAY feature from the model tree,
then right-click and select Edit .
Edit the diameter from 13 to 15.5.
Click twice in the background of the graphics
window to de-select all features.
7. Click Saved Analysis and double-click
the KEYWAY_LENGTH analysis in the Saved
Analysis dialog box.
8. Note that the distance is now 11.75mm. This value meets the requirement.
If the Saved Analysis is left unhidden, the result of the analysis automatically updates
in the graphics window. Icons enable you to easily determine whether the analysis is
unhidden or hidden.
9. Close the Measure dialog box.
10. In the Saved Analysis dialog box, select the KEYWAY_LENGTH analysis and click Delete
Analysis to delete it.
11. Close the Saved Analysis dialog box.

Module 18 | Page 6 2014 PTC


Task 8: Measure the angle between the lobes of the CRANKSHAFT.PRT.

1. Orient to the standard orientation.


2. In the Measure group, select Angle from the
Measure types drop-down menu.
Edit the Selection Filter to Surface.
Select the left surface.
Press CTRL and select the right surface.

3. The indicated angle is approximately 30.

4. Expand the Measure dialog box, if necessary,


and select Supplement from the Angle
drop-down list. The angle is now approximately
150.
5. Click Close from the Measure dialog box.
6. Click Save .
7. Click File > Manage Session > Erase Current
> Yes to erase the model from memory.

Task 9: Analyze the mass properties of the ENGINE.ASM.

1. Click Open .
Select ENGINE.ASM and click Open.

2014 PTC Module 18 | Page 7


2. Select the Analysis tab from the ribbon.
3. Click Mass Properties and click Preview.
The components of the engine have
been assigned appropriate density
values for either steel or aluminum.
4. Note the displayed values for volume, surface
area, average density, mass, and center of
gravity.
5. Click OK from the Mass Properties dialog box.

Task 10: Analyze interferences within ENGINE.ASM components.

1. In the Inspect Geometry group, click Global


Interference and click Preview. Notice that
there is one pair of interfering components.
2. The ENG_BLOCK_REAR.PRT interferes (areas
in dark red) with the ENG_BLOCK_FRONT.PRT
around the alignment pins. Click OK in the
Global Interference dialog box.

Task 11: Resolve the interference.

1. Resolve the interferences in ENG_BLOCK_


FRONT.PRT by editing the depth of the
ALIGN_PINS, as shown in the figure.
Select ENG_BLOCK_FRONT.PRT from the
model.
Right-click and select Open .
Select the ALIGN_PINS feature from the
model tree.
Right-click and select Edit Definition .
Drag the depth handle to 5, editing it if
necessary.
Click Complete Feature .

Module 18 | Page 8 2014 PTC


2. Click Close to return to the ENGINE.ASM.
3. Click Global Interference and click Preview.
4. The Message Log indicates that there are no interfering parts.
5. Click OK in the Global Interference dialog box.
6. Press CTRL+G to regenerate the assembly.
7. Click Save .
8. Click File > Manage Session > Erase Current, then click Select All and OK to erase
the model from memory.

This completes the exercise.

2014 PTC Module 18 | Page 9


Module 18 | Page 10 2014 PTC
Module 19
Assembling with Constraints

2014 PTC Module 19 | Page 1


Exercise 1: Creating the Engine Assembly using
Automatic Constraints

Objectives
After successfully completing this exercise, you will be able to:
Create assembly models.

Scenario
Assemblies are used to combine parts into larger models. These models can either be a top-level
model, which represents the entire product, or a subassembly, that will be further assembled. You
are assigned to begin creating the engine assembly, used later in the top-level drill assembly.

Close Window Erase Not Displayed


Assembly\Automatic-Bs CREATE NEW

Task 1: Create ENGINE.ASM.

1. Click New from the Quick Access toolbar, and select Assembly as the Type. Type engine
as the Name, clear the Use default template check box, and click OK.
2. In the New File Options dialog box, select mmks_asm_design as the Template, and click OK.
3. Disable all Datum Display types.

4. Select Assemble from the Assemble types


drop-down menu in the Component group, select
ENG_BLOCK_REAR.PRT, and click Open.
5. Select Constraint Type Default from the
dashboard.
6. Click Complete Component .
It is a standard practice to constrain the
initial component in an assembly using the
Default constraint type.

7. Click Assemble . Select ENG_BLOCK_


FRONT.PRT and click Open.
8. Reorient the component approximately, as
shown.

Module 19 | Page 2 2014 PTC


9. Zoom in and select the cylindrical surfaces on
an alignment pin and its corresponding hole, as
shown by the selection arrows below. Rotate the
assembly, if necessary.
To easily select the surfaces, zoom in before
selecting.

10. Spin the assembly, as shown.


11. Select surfaces from the other pin and hole.
12. Select the Placement tab and notice that a
Coincident constraint and Oriented constraint
have been automatically created.
13. Notice that the 3D Dragger has dynamically
updated to only allow movement in the
unconstrained degrees of freedom.

14. Select the two surfaces, as shown by the


selection arrows.
15. Notice that this selection has created another
Coincident constraint.
16. Click Complete Component from the
dashboard.

2014 PTC Module 19 | Page 3


17. Orient the assembly to the Standard
Orientation.
18. Click Assemble . Select CYLINDER.PRT
and click Open.
19. Use the 3D Dragger to position the component
approximately as shown.

20. Zoom in and select the cylindrical surfaces from


a pair of corresponding holes, as shown.

21. Spin the assembly and select cylindrical surfaces


from the other pair of corresponding holes, as
shown.

Module 19 | Page 4 2014 PTC


22. Select the two mating surfaces, as shown.
23. Edit the constraint Type to Coincident , if
necessary.
24. Click Complete Component .

25. Click Save from the Quick Access toolbar and click OK to save the model.
26. Click File > Manage Session > Erase Current, then click Select All and OK to erase
the model from memory.

This completes the exercise.

2014 PTC Module 19 | Page 5


Exercise 2: Creating the Drill Chuck Assembly using
Automatic Constraints

Objectives
After successfully completing this exercise, you will be able to:
Create assembly models.

Scenario
Assemblies are used to combine parts together into larger models. These models can either be
a top-level model, which represents the entire product, or a subassembly, that will be further
assembled. You are assigned to begin creating the drill chuck assembly, used later in the top-level
drill assembly.

Close Window Erase Not Displayed


Assembly\Automatic-Bs CREATE NEW

Task 1: Create DRILL_CHUCK.ASM.

1. Click New from the Quick Access toolbar, and select Assembly as the Type. Type
drill_chuck as the Name, clear the Use default template check box, and click OK.
2. In the New File Options dialog box, select mmks_asm_design as the Template, and click OK.
3. Disable all Datum Display types.

4. Select Assemble from the Assemble types


drop-down menu in the Component group,
select CHUCK.PRT, and click Open.
5. Right-click and select Default Constraint.
6. Click Complete Component .
It is a standard practice to constrain the
initial component in an assembly using the
Default constraint type.

7. Click Assemble , select CHUCK_COLLAR.


PRT, and click Open.
8. Use the 3D Dragger to position the component
approximately, as shown.

Module 19 | Page 6 2014 PTC


9. Select cylindrical surfaces to create a Coincident
constraint, as shown.

10. Spin the assembly, as shown. Drag the


translation arrow to place the component
towards the front of the assembly.

11. Select the two surfaces on the back to create a


Coincident constraint, as shown.

12. In the dashboard, edit the constraint Type to


Distance . Type -10 to establish a better view
of the offset and direction.
13. Edit the offset value to 1 and click Complete
Component from the dashboard.
The CHUCK_COLLAR.PRT is assembled
as fully constrained by selecting the Allow
Assumptions option. In this case, the
rotation of the component is not important.

2014 PTC Module 19 | Page 7


14. Click Assemble , select STANDARD_BIT.
PRT, and click Open.
15. Orient the assembly, as shown. Use the
3D Dragger to position the component
approximately as shown.

16. Select cylindrical surfaces to create a Coincident


constraint, as shown.

17. Drag the drill bit back out of the chuck using the
3D Dragger.
18. Select the end of the bit and the bottom inside
surface of the chuck to create a Coincident
constraint, as shown.
19. Edit the constraint Type to Coincident , if
necessary.

20. Click Complete Component .


21. Click Save from the Quick Access toolbar
and click OK to save the model.
22. Click File > Manage Session > Erase Current,
then click Select All and OK to erase the
model from memory.

This completes the exercise.

Module 19 | Page 8 2014 PTC


Exercise 3: Creating the Crank Assembly using
Automatic Constraints

Objectives
After successfully completing this exercise, you will be able to:
Create assembly models.

Scenario
Assemblies are used to combine parts together into larger models. These models can either be
a top-level model, which represents the entire product, or a subassembly, that will be further
assembled. You are assigned to begin creating the crank assembly, used later in the top-level
drill assembly.

Close Window Erase Not Displayed


Assembly\Automatic-Bs CREATE NEW

Task 1: Create CRANK.ASM.

1. Click New from the Quick Access toolbar, and select Assembly as the Type. Type crank
as the Name, clear the Use default template check box, and click OK.
2. In the New File Options dialog box, select mmks_asm_design as the Template, and click OK.
3. Disable all Datum Display types.

4. Select Assemble from the Assemble types


drop-down menu in the Component group,
select CRANKSHAFT.PRT, and click Open.
5. Right-click and select Default Constraint.
6. Click Complete Component .

7. Click Assemble , select FLYWHEEL.PRT,


and click Open.
8. Spin the assembly slightly.
9. Use the 3D Dragger to position the component
approximately as shown.

2014 PTC Module 19 | Page 9


10. Select the 2 conical surfaces as shown by the
selection arrows.

11. In the dashboard, edit the Constraint Type


shown from Coincident to Centered .

12. Enable Plane Display .


13. Right-click in the graphics window and select
New Constraint.
14. Zoom in on the assembly.
15. Select the KEY datum planes from each
component to create a Coincident constraint.

16. Click Complete Component .


17. Disable Plane Display .
18. Click Save from the Quick Access toolbar
and click OK to save the model.
19. Click File > Manage Session > Erase Current,
then click Select All and OK to erase the
model from memory.

This completes the exercise.

Module 19 | Page 10 2014 PTC


Exercise 4: Creating the Piston Assembly using
Automatic Constraints

Objectives
After successfully completing this exercise, you will be able to:
Create assembly models.

Scenario
Assemblies are used to combine parts together into larger models. These models can either be
a top-level model, which represents the entire product, or a subassembly, that will be further
assembled. You are assigned to begin creating the piston assembly, used later in the top-level
drill assembly.

Close Window Erase Not Displayed


Assembly\Automatic-Bs CREATE NEW

Task 1: Create PISTON.ASM.

1. Click New from the Quick Access toolbar, and select Assembly as the Type. Type piston
as the Name, clear the Use default template check box, and click OK.
2. In the New File Options dialog box, select mmks_asm_design as the Template, and click OK.
3. Disable all Datum Display types.

4. Select Assemble from the Assemble types


drop-down menu in the Component group,
select PISTON.PRT, and click Open.
5. Right-click and select Default Constraint.
6. Click Complete Component .

7. Click Assemble . Select PISTON_PIN.PRT


and click Open.
8. Select cylindrical surfaces to create a Coincident
constraint, as shown.

2014 PTC Module 19 | Page 11


9. Use Find to select the next set of assembly
references:
Click Find from the status bar to start the
Search Tool. Select Datum Plane as the Look
for option, select PISTON_PIN.PRT as the
Look in object, and click Find Now.
Select FRONT:F3(DATUM PLANE), click Add
Item , and click Close.
Click Find to start the Search Tool. Select
Datum Plane as the Look for option, select
PISTON.PRT as the Look in object, and click
Find Now.
Select FRONT:F3(DATUM PLANE), click Add
Item , and click Close.
Click Complete Component .

Using Find can be very helpful when selecting references in large, complicated
assemblies.

10. Click Assemble , select PISTON_RING.PRT,


and click Open.
11. Use the 3D Dragger to position the component
approximately, as shown.

12. Select cylindrical surfaces from the


PISTON_RING.PRT and the PISTON.PRT, as
shown.

Module 19 | Page 12 2014 PTC


13. Select the planer surfaces from the
PISTON_RING.PRT and the PISTON.PRT, as
shown.

14. In the dashboard, select the Placement tab.


Clear the Allow Assumptions check box.
15. Use the 3D Dragger to rotate the piston ring gap
to the front.
16. Right-click and select Fix Constraint.

17. Click Complete Component .


18. Click Save from the Quick Access toolbar
and click OK to save the model.
19. Click File > Manage Session > Erase Current,
then click Select All and OK to erase the
model from memory.

This completes the exercise.

2014 PTC Module 19 | Page 13


Module 19 | Page 14 2014 PTC
Module 22
Drawing Layout and Views

2014 PTC Module 22 | Page 1


Exercise 1: Creating Drawing Views

Objectives
After successfully completing this exercise, you will be able to:
Create drawings.
Add views to drawings.

Scenario
The Manufacturing Department needs to begin planning the tooling necessary to create the piston
part. You must show projected, cross-sectional, and detailed views of the piston. Additionally, a
drawing of the completed engine assembly is required to begin planning the assembly process for
the engine. For this, you create a second sheet that displays the engine assembly in an exploded
state and includes a Bill of Materials.
Close Window Erase Not Displayed
Drawing_Views\Engine PISTON.PRT

Task 1: Open PISTON.PRT and view the cross-section.

1. Disable all Datum Display types.


2. In the model tree, right-click cross-section A and
select Show Section.
3. De-select the section.
4. Click Close .

Task 2: Create a new drawing with default views.

1. Click File > New > Drawing and type


drill_components. Clear the Use default
template check box and click OK to continue.
2. Notice that PISTON.PRT is selected as the
Default Model. Select Use template, click
Browse, select DRAWING_TEMPLATE.DRW,
and click Open.
3. Click OK. Type your first initial, followed by your
surname, and press ENTER
4. Note that the drawing template automatically
creates three standard views (front, top, right)
without displaying any hidden lines.
5. Click Show Navigator to toggle off the model
tree.
The drawing template is a special drawing *.drw file that configures new drawings.
In this case, it has also loaded a format *.frm file containing a title block.

Module 22 | Page 2 2014 PTC


Task 3: Create projected views of the PISTON.PRT.

1. Select the front view (VIEW_TEMPLATE_1),


right-click, and select Projection . Select a
point under the front view to create the bottom
view, as shown.

2. Create a projected view with a cross-section, as


shown:
Select the front view, right-click, and select
Projection . Select a location to the left of
the front view to place the view.
With the view still selected, right-click, and
select Properties. Select the Sections
category in the Drawing View dialog box,
select 2D cross-section, and click Add
Section .
Select section A and click Apply > Cancel.
Right-click and select Add Arrows. Select the
front view to place the arrows.
Right-click and clear Lock View Movement
, if necessary. Select and move the bottom
view downward, away from the section arrows.
(Move views by first clicking to select them and
then clicking and dragging to relocate them.)
Click in the background to de-select all views.

2014 PTC Module 22 | Page 3


Task 4: Insert a detail view.

1. Create a detail view, as shown:


Click Detailed from the Model Views group
in the Layout tab.
Zoom in and select an edge of the ring groove
cut in the right view (VIEW_TEMPLATE_3) as
the detail center point.
Click points to create a spline curve around
the selected ring groove cut. Do NOT close
the spline curve when sketching it. Instead,
leave a gap.
Middle-click to complete the spline curve.

2. Place the detail view, as shown:


Select a point to the right of the top view
(VIEW_TEMPLATE_2) to place the detailed
view.
Click in an empty area of the graphics window
to de-select the view.
Select the view note, double-click the 4.000
scale on the view, type 5, and press ENTER.
Click in an empty area of the graphics window
to de-select the scale value.
Select the detail note in the right view. Drag it
to reposition it as necessary.

Module 22 | Page 4 2014 PTC


Task 5: Insert a general view.

1. If necessary, click Refit , and click in the


drawing background to de-select all items.
2. Create a general view, as shown:
Right-click and select General .
Click OK in the Select Combined State dialog
box.
Select a point in the upper-right corner of the
sheet.
Move the Drawing View dialog box away from
the view location.
In the Drawing View dialog box, select the 3D
orientation and click Apply.
Select the Scale category, select Custom
scale, type 3, and click Apply.
Select the View Display category and edit the
Display style to Shading.
Click Apply > Cancel.

Task 6: Move views and change view display.

1. Manipulate the drawing, as shown:


Select and drag views to arrange them,
as shown. (Move views by first clicking to
select them and then clicking and dragging
to relocate them.)
Select the cross-section view, right-click, and
select Properties.
Select the View Display category. Select
None as the Tangent edges display style.
Click OK.
You can also change the Display Style of
views to display hidden lines.

Task 7: Create a view of ENGINE.ASM.

1. Click anywhere in the drawing background to de-select the previous view.


2. Click Drawing Models from the Model Views group in the Layout tab. Click Add Model
from the menu manager. Select ENGINE.ASM and click Open. Click Done/Return from
the menu manager.
3. Click New Sheet . Type your first initial, followed by your surname, and press ENTER.

2014 PTC Module 22 | Page 5


4. Create a general view, as shown:
Right-click and select General .
Click OK to accept the No Combined State
selection.
Select a point near the upper-right corner of
the sheet.
Select EXPLODE_ORIENTATION as the
Model view name and click Apply.
Select the Scale category and verify that
Default scale for sheet is selected.
Select the View Display category. Select
Shading as the Display style.
Click Apply > Cancel.
Double-click the scale in the lower-left corner
of the screen, type 1, and press ENTER.

Task 8: Configure the view to display an explode state.

1. Manipulate the view, as shown.


Select the view, right-click, and select
Properties.
Select the View States category and select
the Explode components in view check box.
Select ENGINE_EXPLODE from the
Assembly explode state drop-down list.
Click Apply > Cancel.
Move the view, as necessary.
2. Click Show Navigator to toggle it on.
3. Click Save from the Quick Access toolbar
and click OK to save the model.
4. Click File > Manage Session > Erase Current,
then click Select All and OK to erase the
model from memory.

This completes the exercise.

Module 22 | Page 6 2014 PTC


Module 23
Creating Drawing Annotations

2014 PTC Module 23 | Page 1


Exercise 1: Annotating Drawings

Objectives
After successfully completing this exercise, you will be able to:
Add annotations to a drawing.
Add a BOM and Balloons.

Scenario
You are continuing to work on the piston and engine drawings and add the dimensional detail
needed by Manufacturing. You need to add the piston dimensions that are necessary for machining.
Additionally, you need to add a BOM and Balloons that label each part of the engine assembly.

Close Window Erase Not Displayed


Drawing_Details\Annotating DRILL_COMPONENTS.DRW

Task 1: Show all dimensions on the PISTON.PRT.

1. Disable all Datum Display types.


2. Select the Sheet 1 sheet tab to activate it.
The active model is shown at the bottom of
the graphics window.
3. Select the Annotate tab from the drawing ribbon.
4. Click Show Model Annotations from the
Annotations group.
5. In the Show Model Annotations dialog box, verify
that the Dimensions Tab is selected.
Select PISTON.PRT from the model tree.
Click Select All .
6. Click Clear All in the Show Model
Annotations dialog box.
7. Leave the Show Model Annotations dialog box
open for now.

Module 23 | Page 2 2014 PTC


Task 2: Show dimensions by feature.

1. Select Cut id 1963 from the model tree.


2. Click Select All in the Show Model
Annotations dialog box.
3. Note that the dimensions are displayed in
various views, as shown.
4. Click Clear All in the Show Model
Annotations dialog box.
5. Leave the Show Model Annotations dialog box
open for now.

Task 3: Show dimensions by feature and view.

1. Show the dimensions of the ring groove so they


appear only in the detail view, as shown:
Select the ring groove F16(CUT) from the
detail view.
Click Select All in the Show Model
Annotations dialog box.
Clear the check box for the d32 dimension.
Click Apply.

2014 PTC Module 23 | Page 3


2. Select the cut feature F20(CUT) in the bottom
view

3. In the Show Model Annotations dialog box,


select the d40 dimension check box.
Click Apply.
4. Leave the Show Model Annotations dialog box
open for now.

Task 4: Show dimensions by view and then show all remaining dimensions.

1. Show all the dimensions in the front view, as


shown in the figure:
Select the front view.
Click Select All in the Show Model
Annotations dialog box.
Click Apply.
Leave the Show Model Annotations dialog box
open for now.
When working outside of the context of
the Show Model Annotations dialog box,
you can also select a view, right-click, and
select Show Model Annotations when
the Annotate tab is selected in the drawing
ribbon.

Module 23 | Page 4 2014 PTC


2. Show the remaining dimensions on the drawing:
Select PISTON.PRT from the model tree.
Click Select All in the Show Model
Annotations dialog box.
Click Apply > Cancel.

3. In the detail view, select and drag the two 1.5


dimensions so they are better oriented on the
drawing view, as shown.
4. Drag the handles at the ends of the witness lines
to position them appropriately.

2014 PTC Module 23 | Page 5


Task 5: Create a driven dimension for the inner diameter of the piston.

1. Click Dimension from the Annotations group.


Zoom in, press CTRL, and select the edges
shown in the figure.
Middle-click to place the dimension, also
shown in the figure.
Middle-click again to stop placing dimensions.
2. With the 12 dimension still selected, right-click
and select Properties.
Select the Display tab.
Click in the Prefix field, click Text Symbol,
select (diameter), and click Close > OK.
Click in an empty area of the graphics window
to de-select the dimension.

Task 6: Use various detail options to manually arrange the dimensions.

1. Select one of the 360 dimensions on the top


view.
Right-click and select Delete .
Repeat for the second 360 dimension.
A drawing dimension that is located beneath
other dimensions can be selected by
placing your cursor over the dimension,
right-clicking to query, and clicking to select
it. Also, use care to select the appropriate
dimension as there are multiple 360, 12,
and 25 dimensions that belong to completely
different features.

Module 23 | Page 6 2014 PTC


2. Select the 8 dimension on the front view,
right-click, select Move to View , and select
the left cross-section view.
3. Select the 12 dimension on the left
cross-section view and drag the dimension
outside of the view. Right-click and select Flip
Arrows.
4. Drag the handles at the ends of the witness lines
to position them appropriately.

5. In the front view, select the 16 dimension


and drag it to the left until it snaps to the 14
dimension.
6. With the 16 dimension still selected, drag the
handles at the ends of the witness lines to
position them appropriately.

7. Select the detail view note and move it to the


right.
8. Select the upper 1.5 dimension on the detailed
view and drag it below the view. Drag the
handles at the ends of the witness lines to
position them appropriately.

9. Select the R3 dimension from the top view and


select Move to View from the Edit group.
Select the bottom view.
10. With the R3 dimension still selected, right-click
and select Edit Attachment. Select the
bottom-right purple edge of the highlighted round
in the bottom view and middle-click.
11. Move the dimension to the outside of the view.
Right-click and select Flip Arrows.

2014 PTC Module 23 | Page 7


12. Continue using these methods to clean the drawing, as shown in the following figure.

Task 7: Edit dimensions to update the model.

1. Select the Review tab in the drawing ribbon.


2. Edit the dimensions of the piston ring groove in
the model, as shown in the figure:
Edit the dimensions of the ring groove so that
it is 2 mm wide and 1 mm deep.
Click Regenerate Active Model from the
Update group to update the model and the
drawing.

Module 23 | Page 8 2014 PTC


3. Edit the dimensions of the piston ring groove
height in the model, as shown in the following
figure:
Select the d32:F16(CUT) groove height
dimension.
Edit the dimension to 26.5 and click
Regenerate from the Quick Access toolbar
to update the model and the drawing.
There are two 25 dimensions: d32 controls
the height of the groove cut and d5 controls
the height of the inner piston cut. To
determine the correct dimension, you
can pre-select the dimension. When you
pre-select a dimension, a pop-up note
appears, indicating which dimension you
are pre-selecting.

4. Select PISTON.PRT from the model tree,


right-click, and select Open . Select the
revolved ring groove cut, right-click, and select
Edit to view the modified dimensions.

5. Double-click each dimension, and type the original values (1.5 x 1.5 and 25).
6. Click twice in the background to de-select all geometry.
7. Click Close to return to the DRILL_COMPONENTS.DRW. Notice that the dimensions
have updated automatically in the drawing.
8. Click Save from the Quick Access toolbar. Note that this also saves the models.

2014 PTC Module 23 | Page 9


Task 8: Create a Bill of Materials (BOM).

1. Select the Sheet 2 sheet tab to activate it.


2. Close the model tree by clicking Show Navigator .
3. Select the Table tab in the drawing ribbon.
4. Click Table From File from the Table group.
Select BOM_TABLE.TBL and click Open.
Place the table in the upper-left corner of the sheet.
5. Double-click the sheet scale in the lower-left corner of the sheet and type 0.8.
6. Select the view.
7. Right-click and clear the Lock View Movement option, if necessary.
8. Drag the view, as shown in the figure.
This parametric table was created with repeat regions. Repeat regions are special table
cells that contain parametric notes. Parametric notes automatically update if components
are modified (assembled, deleted, renamed, or suppressed).

Module 23 | Page 10 2014 PTC


Task 9: Add BOM Balloons to the view.

1. Click Create Balloons from the Balloons group and select Create Balloons - All.
2. Click and drag the Balloons to arrange them, as shown in the figure.

You can select Cleanup Balloons to organize the Balloons. You can also select
a BOM Balloon, right-click, and select Edit Attachment to change the component
geometry to which the BOM Balloon points.

3. Open the model tree window by clicking Show Navigator .


4. Click Save .
5. Click File > Manage Session > Erase Current, then click Select All and OK to erase
the model from memory.

This completes the exercise.

2014 PTC Module 23 | Page 11


Module 23 | Page 12 2014 PTC
Module 24
Using Layers

2014 PTC Module 24 | Page 1


Exercise 1: Creating and Managing Layers

Objectives
After successfully completing this exercise, you will be able to:
Create layers containing reference geometry features.

Scenario
While working on the MUFFLER.PRT, you discover that you need to remove unnecessary reference
geometry by creating and managing layers effectively. You need to examine the default layers in the
MUFFLER.PRT, create a layer for the exhaust holes, and manually hide the axes.

Close Window Erase Not Displayed


View\Layers_Muffler MUFFLER.PRT

Task 1: Examine the default layers in the MUFFLER.PRT.

1. Enable only the following Datum Display types: .


2. In the ribbon, select the View tab.
3. Enable Plane Tag Display and Axis Tag Display .
4. Notice that there are a number of datum features
visible in the model.

5. Review the model tree and notice that there are


several hidden sketches (Sketch 1-6). These
sketches were automatically hidden during the
creation of features.
6. Click Layers from the Visibility group to
enable it. Expand the Hidden Items layer and
notice that the hidden sketches from the model
tree are listed, as well as a datum plane. Select
the MOUNT datum plane in the layer tree to
locate it on the model.

Module 24 | Page 2 2014 PTC


7. Click in the graphics window to clear the display
of the MOUNT plane.
8. Expand the 01__PRT_ALL_DTM_PLN and
01__PRT_DEF_DTM_PLN layers. Notice that
datums RIGHT, TOP, and FRONT are common,
but the 01__PRT_ALL_DTM_PLN layer contains
additional items. Also notice that the symbol for
each layer is different.

9. Select the 01__PRT_DEF_DTM_PLN layer,


right-click, and select Layer Properties. Notice
that the Contents tab displays the three datum
features. Select the Rules tab and notice that
there are no rules present. Click OK.
10. Select the 01__PRT_ALL_DTM_PLN layer,
right-click, and select Layer Properties. Notice
that the Contents tab displays the five datum
features. Select the Rules tab and notice that
there are two rules present. Click OK.
11. Select the 01__PRT_DEF_DTM_PLN layer,
right-click, and select Hide. Then click Repaint
. Notice that the default planes are removed
from the display.

12. Select the 01__PRT_ALL_DTM_PLN layer,


right-click, and select Hide. Then click Repaint
. Notice that all planes are now removed from
the display.
13. Select Save Status from the Status types
drop-down menu in the Visibility group to save
this layer display configuration in the model.
If you need to save the layer status when
saving the model, you must manually save
the status of Hidden/Shown layers to the
model.

2014 PTC Module 24 | Page 3


Task 2: Create a layer for the exhaust holes.

1. In the layer tree, right-click and select New


Layer. Type EXH_HOLES as the Name in the
Layer Properties dialog box. Leave the dialog
box open. In the top of the layer tree, click Show
and select Model Tree. Select the last four
holes in the model tree. Click OK in the Layer
Properties dialog box.
2. In the top of the model tree, click Show and
select Layer Tree. Select the EXH_HOLES
layer, right-click, and select Hide. Then click
Repaint . Notice that the hole axes are
hidden, but the holes themselves remain.

Task 3: Manually hide the axes.

1. In the top of the layer tree, click Show and


select Model Tree. Press CTRL and select
axes HOLE_1 and HOLE_2, right-click, and
select Hide . Then click Repaint . The axis
features are hidden, and the hole axes remain
visible.

2. Click Layers to enable it. Expand the Hidden


Items layer and notice that the HOLE_1 and
HOLE_2 axes are contained within this layer.
3. In the layer tree, right-click and select Save
Status to save this latest layer display
configuration to the model.
4. Disable Plane Tag Display and Axis Tag
Display .
5. Click Save from the Quick Access toolbar.
6. Click File > Manage Session > Erase Current
> Yes to erase the model from memory.

This completes the exercise.

Module 24 | Page 4 2014 PTC


Module 28
Project II

2014 PTC Module 28 | Page 1


Objective 1: Creating the FLANGE.PRT

Scenario
ACME Incorporated develops and markets several consumer, industrial, and defense goods. The
Light Industrial Division of ACME creates a number of products, including industrial fans, heating, air
conditioning, and pumps. You are employed by the Light Industrial Division of ACME Inc., which has
recently started using Creo Parametric for its product designs.
Upon returning from Creo Parametric training, you are assigned to create the AC-40 Air Circulator.
You apply the skills learned in previous topics of this course to create the final assembly and
components of the air circulator.

Close Window Erase Not Displayed


Projects\Intro-2_working CREATE NEW

Task 1: Create the flange and extrude the main body.

1. Create a new part named FLANGE.PRT.


2. Enable only the following Datum Display types:
.
3. Create the extrude feature as shown.
Use the mmns_part_solid template for this
and all models in this project.

To help verify the correct datum entities,


enable datum tag display for this project.

Task 2: Create an attachment hole.

1. Create the radial hole as shown.

Module 28 | Page 2 2014 PTC


Task 3: Pattern the flange hole.

1. Pattern six evenly-spaced holes on the flange.

Task 4: Apply an appearance to the flange.

1. Apply the Blue_Dark appearance to the model.


2. Save the model and close the window.

This completes the objective.

2014 PTC Module 28 | Page 3


Objective 2: Completing the IMPELLER.PRT
Task 1: Pattern the blade and round.

1. Open IMPELLER.PRT.
2. Create an axis pattern, evenly spacing six
instances of the BLADE feature.

Click Set Angular Extent to evenly


space the six blades.
3. Reference pattern the BLADE_ROUND feature.

Task 2: Apply an appearance to the impeller.

1. Apply the Silver appearance to the model.


2. Save the model and close the window.

This completes the objective.

Module 28 | Page 4 2014 PTC


Objective 3: Completing the ENGINE_BLOCK.PRT
Task 1: Create the first cooling fin.

1. Open ENGINE_BLOCK.PRT.
2. Use an embedded datum and an offset loop in
sketcher to extrude the fin, as shown.
3. Rename the feature as FIN.

Task 2: Pattern the cooling fin.

1. Create a direction pattern, as shown.

2014 PTC Module 28 | Page 5


2. Reorder the BORE hole feature so it removes
material from the fins, as shown.

Module 28 | Page 6 2014 PTC


Task 3: Create rounds to smooth edges.

1. Create three rounds, as shown.

2014 PTC Module 28 | Page 7


Task 4: Apply an appearance and create a cross-section.

1. Apply the Silver appearance to the model.


2. Create a cross-section named A.
3. Save the model and close the window.

This completes the objective.

Module 28 | Page 8 2014 PTC


Objective 4: Completing the IMPELLER_HOUSING.PRT
Task 1: Create a hole in the mounting flange.

1. Open IMPELLER_HOUSING.PRT.
2. Create the radial hole as shown.

Task 2: Pattern the bolting flange hole.

1. Create an axis pattern, evenly spacing six


instances of the hole.

2014 PTC Module 28 | Page 9


Task 3: Mirror the hole and rib features, and round the mounting flange corners.

1. Mirror both the attach hole and strengthening rib


about datum plane FRONT, as shown.
2. Round the corners as shown.

3. Mirror the mounting flange, ribs, holes, and


rounds about datum plane RIGHT to the front of
the model as one operation.

Module 28 | Page 10 2014 PTC


Task 4: Apply an appearance to the impeller housing.

1. Apply the Blue_Dark appearance to the model.


2. Save the model and close the window.

This completes the objective.

2014 PTC Module 28 | Page 11


Objective 5: Completing the FRAME.PRT
Task 1: Mirror the entire frame.

1. Open FRAME.PRT.
2. Mirror the entire model node as shown.

Task 2: Add mounting holes to the frame.

1. Create a hole, as shown.


2. Select the Move/Rotate option in the Paste
Special dialog box to create the second
dependent offset hole.
The holes should only drill to the next
surface.

Module 28 | Page 12 2014 PTC


3. Create a hole, as shown.
4. Select the Move/Rotate option in the Paste
Special dialog box to create the second
dependent offset hole.
The holes should only drill to the next
surface.

When possible, reference more stable


surface geometry rather than edges and
vertices when creating features. This
practice creates more robust models that are
easier to modify.

Task 3: Smooth the sharp corners.

1. Add one round feature to the five edges shown.

2014 PTC Module 28 | Page 13


Task 4: Apply the same holes and rounds to the other side of the frame.

1. Adjust the feature order so the holes and rounds


are on both sides of the frame.
2. Apply the Gray_Dark appearance to the frame.
3. Save the model and close the window.

This completes the objective.

Module 28 | Page 14 2014 PTC


Objective 6: Creating the PISTON_ASSY.ASM
Task 1: Assemble the piston and piston pin parts.

1. Create a new assembly named PISTON_ASSY.


ASM.
Use the mmks_asm_design template for
this and all assemblies in this project.
2. Assemble the PISTON.PRT in the Default
location.
3. Assemble the PISTON_PIN.PRT.
4. Assemble the pin Coincident with the hole.
Assemble the FRONT datum planes of both
parts Coincident as well.

Task 2: Assemble the connecting rod.

1. Assemble the CONNECTING_ROD.PRT.


2. Assemble the hole in the CONNECTING_
ROD.PRT (the end without a lubrication hole)
Coincident with the PISTON_PIN.PRT.
3. Assemble the FRONT datum planes of both
parts Coincident.
4. Clear the Allow Assumptions check box and
complete the component.
Clearing the Allow Assumptions
check box enabled you to leave the
CONNECTING_ROD.PRT a Packaged
component, rather than a fully constrained
component, of the assembly. This is the
desired design intent, as the other half of
the CONNECTING_ROD.PRT is ultimately
assembled to another model.

5. Drag the packaged CONNECTING_ROD.PRT


to a position, as shown.
6. Save the model, close the window, and erase all
models from session.
The Drag Component functionality is only
valid for packaged components.

This completes the objective.

2014 PTC Module 28 | Page 15


Objective 7: Creating the BLOWER.ASM
Task 1: Assemble the impeller housing and flange.

1. Create a new assembly named BLOWER.ASM.


Use the mmks_asm_design template for
this assembly.
2. Assemble the IMPELLER_HOUSING.PRT in the
Default location.
3. Assemble the FLANGE.PRT as shown.
4. Save the model, close the window, and erase all
models from session.

This completes the objective.

Module 28 | Page 16 2014 PTC


Objective 8: Creating the ENGINE.ASM and
ENGINE_BLOWER.ASM
Task 1: Create the engine assembly.

1. Create a new assembly named ENGINE.ASM.


Use the mmks_asm_design template for
this assembly.
2. Assemble the ENGINE_BLOCK.PRT in the
Default location.

2014 PTC Module 28 | Page 17


Task 2: Assemble the crankshaft and piston assembly using mechanism connections.

1. Assemble the CRANKSHAFT.PRT using a Pin


connection, as shown.
Depending on how you create the
constraints, you may have two Coincident
constraints instead of a Coincident and
Oriented constraint.

Module 28 | Page 18 2014 PTC


2. Open the PISTON_ASSY.ASM.
3. Convert the existing CONNECTING_ROD.PRT constraints to connections.
To convert the constraints to connections, you must clear the Allow Assumptions
check box.

4. Return to the ENGINE.ASM and assemble the


PISTON_ASSY.ASM, creating a Cylinder
connection between the piston and engine block,
as shown.

2014 PTC Module 28 | Page 19


5. Before completing the sub-assembly placement,
add a second connection set, creating a
Cylinder connection between the crankshaft
and connecting rod, as shown.

6. Apply the Silver_Transparent appearance to


the engine block component.
7. Save the assembly and close the window.

Task 3: Create the engine blower assembly.

1. Create a new assembly named ENGINE_


BLOWER.ASM.
2. Assemble the FRAME.PRT in the Default
location.
3. Orient the assembly as shown and save a view
called 3D-1.

Module 28 | Page 20 2014 PTC


Task 4: Assemble the engine assembly and impeller part.

1. Assemble the ENGINE.ASM to the frame as


shown.

2014 PTC Module 28 | Page 21


2. Assemble the IMPELLER.PRT to the crankshaft
as shown.

Module 28 | Page 22 2014 PTC


3. Drag the impeller to observe the related
assembly motion.

Task 5: Assemble the blower assembly.

1. Assemble the BLOWER.ASM to the frame as


shown.
2. Save the model and close the window.

This completes the objective.

2014 PTC Module 28 | Page 23


Objective 9: Assembling the BOLT.PRT
Task 1: Assemble the bolts.

1. Open ENGINE_BLOWER.ASM.
2. Assemble one BOLT_12.PRT model to the
engine block as shown.
3. Press CTRL+C and CTRL+V to copy and paste
the BOLT_12.PRT into the three other engine
block holes shown.
When using copy and paste functionality,
the system retains information regarding the
component references.

4. Assemble four BOLT_8.PRT models to the


impeller housing as shown.

5. Assemble and pattern a BOLT_5.PRT model as


shown.
6. Save the model and close the window.

This completes the objective.

Module 28 | Page 24 2014 PTC


Objective 10: Creating the ENGINE-BLOWER_MODELS.
DRW
Task 1: Create a drawing of the engine blower models.

1. Create a new drawing named ENGINE-


BLOWER_MODELS.
2. Reference the ENGINE_BLOCK.PRT
model and the drawing template named
drawing_template.drw.
3. Type your name at the prompt.
4. Edit the drawing scale of this sheet to 1.75.
Creo Parametric automatically creates
three standard views based on the default
drawing template. This drawing template
also includes a drawing format.

5. Edit the right view to be a 2-D cross-sectional


view named A.
6. Display cross-section arrows in the front view.

7. Insert a shaded general view in the upper-right


corner of the sheet. Use the default orientation
and a custom view scale of 2.

2014 PTC Module 28 | Page 25


8. Insert a detailed view of the first few fins.
9. Adjust the hatching as shown.
When creating the detail view, the prompts
in the Message Log guide you through the
process in steps.

Task 2: Add a second model on a new sheet.

1. Modify the drawing properties so that


it references a second model, the
CRANKSHAFT.PRT.
2. Insert a new sheet and type your name at the
prompt.
3. Insert a general view in the lower center of the
sheet. Orient the view to the LEFT model view.
4. Edit the display of the general view to Hidden.
5. Modify the drawing scale of this sheet to be 2.5.
6. Insert projected views on each side of the first
view.
7. Unhide datum plane DTM1.
8. Insert an auxiliary view and select DTM1 in the
far right projected view as the reference.
9. Rename the drawing view to A.
10. Add arrows, as shown.

Module 28 | Page 26 2014 PTC


11. Insert a view in the upper-right corner of the
sheet as shown.
12. Orient the view to the 3D model view.
13. Set the view scale to 3.

Task 3: Show dimensions in the drawing.

1. Show and position dimensions, as shown.


2. This drawing is utilized later in the project. Save the drawing and close the window.

This completes the objective.

2014 PTC Module 28 | Page 27


Objective 11: Analyzing and Resolving Interferences
Task 1: Analyze static interferences in the engine blower assembly.

1. Open ENGINE_BLOWER.ASM.
2. Drag a blade on the impeller until the position of
the piston is approximately at its highest location.

3. Perform a Global Interference check on the


assembly.
4. Identify the areas of interference between the
frame and impeller components.

Module 28 | Page 28 2014 PTC


Task 2: Resolve the interference between the frame and impeller components.

1. Remove material from the frame, as shown.


2. Run the interference check again to verify that
the frame no longer interferes with the impeller
components.

Task 3: Check for collision detection on the moving parts.

1. Enable Collision Detection.


2. Drag a blade on the impeller. As the components
proceed through their motions, check for
component collisions.
3. Investigate the collision between the connecting
rod and engine block.

2014 PTC Module 28 | Page 29


Task 4: Implement modifications to eliminate the interference.

1. Open the ENGINE.ASM and activate the


ENGINE_BLOCK.PRT.
2. Create an extrude feature to remove a circular
section of material, as shown.

3. Create a round feature on both edges, as shown.


4. Save the model and close the window.

Module 28 | Page 30 2014 PTC


5. Open the ENGINE-BLOWER_MODELS.DRW.
6. Edit the 8.5 dimension on sheet 2 to 8, as shown.
Update and save the model, close the window,
and return to the ENGINE_BLOWER.ASM.

7. Verify that the modifications you made have removed the interference.
8. Save the model and close the window.
This completes the objective.

2014 PTC Module 28 | Page 1

Potrebbero piacerti anche