Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Bray
High
Performance
Company
A Subsidiary of BRAY INTERNATIONAL, Inc.
Flow-Teks Series 7000 & 8000 ball valves stem packing, handles and mounting hard- End Connections
offer the highest flexibility in selection of ware between valve sizes and series mem- Threaded
end connections, seat materials and 3 piece bers. This system reduces parts inventory Socket Weld
design. To meet customer demands for a and maintenance costs. Butt Weld
valve with the widest possible range of ap- The 3 Piece Body Design allows the body ASME/ANSI 150
plications, these valves can be fitted with to swing-out for ease of in-line maintenance. Flanged
control or tri-ported balls (for full cavity It also makes it possible to offer a wide Flush Bottom Tank
drainage), as well as cavity fillers for spe- variety of end conections. Weld In Place Extended
cial service requirements. End connections are com-
Pressure Rating
The Series 7000/8000 is designed with pletely interchangeable.
1/4-4: 1000 psi WOG,
extensive interchangeability of balls, stems,
6-12: to 400 psi WOG
Features
Stem Assemblies
Flow-Tek manufactures heavy duty, high
D quality stems with double D connection
to ball and operator mounting. Stems are
mated with the ball to ensure positive con-
tact. All Flow-Tek stems are internal entry
and blowout proof for maximum safety.
Smart Stem
F Valve Sizes 1/4 through 21/2
Flow-Teks Interchangeable Family of valves
feature strong, large diameter stems with
G live-loaded, self-adjusting sealing utilizing
belleville washers which automatically ad-
C just to compensate for changes in tempera-
A ture and wear. Manual adjustments which
can cause damage to the seal and seat
are not required. The assembly is secured
by a saddle-type lock washer which pre-
B vents stem nuts from unthreading in high
cycle automation applications.
E
Lock Nut
Handle
Lock Nut
Tab Lock Washer
Ball (A) Flow-Tek balls are precision machined and mirror finished for Belleville Washers
bubble-tight shut off with less operating torque. Ball edges have ma- Packing Gland
chined curvatures to reduce seat wear and provide a high cycle life. Sleeve
Body (B) Valve bodies are investment cast and solution annealed/nor- Packing Protector -
PEEK
malized for the highest quality and added strength. Body castings are
marked with a foundry heat number for full traceability. Carbon steel bod- Stem Packing
ies are phosphate coated for increased corrosion resistance.
Seat (C) Flow-Teks seat design ensures bi-directional, bubble-tight seal-
Stem
ing while providing the lowest possible torque. This seat design re-
duces friction, minimizes seat wear and reduces operating torque.
Double Lock Nut Design (D) Standard on the Series 7000/8000, the Valve Body
double lock nuts allow handles to be easily and safely removed while Thrust Washer -
50/50
the valve is under full line pressure. Thrust Washer
Body Bolts (E) Standard material is 304 Stainless Steel. Protector - PEEK
Body Hinges (F) Heavy duty hinges, throughout the entire size range, Anti-Static Device
provide positive alignment of body to end connection during swing-out, Ball
Seat
in-line servicing.
End Connections (G) The Series 7000/8000 features a full range of inter- Stem Packing An adjustable V-ring design
changeable connections. creates a multiple seal between the stem
Anti-Static Protection Series 7000/8000 valves feature anti-static ground- and body. Each stem assembly is com-
ing devices as standard. These devices ensure electrical continuity be- posed of three or four (dependent on valve
tween valve ball, stem and body, thus eliminating the possibility of static size) rings providing a very high cycle life
electrical charges creating sparks within the valve. by resisting creep and cold flow. The Thrust
Washer and the Thrust Washer Protector
Seat Materials combine to provide a primary seal, reduce
Flow-Tek offers the following standard seat materials for the Series 7000 torque and prevent galling. This arrange-
and Series 8000: RPTFE, Stainless Steel/PTFE (50/50), UHMWPE, Vir- ment is a Flow-Tek exclusive.
gin PTFE, PEEK, Tek-Fil, TFM and Cavity Fillers.
Other seat materials are available upon request.
2
Features
3 Piece Valve Body Design
The unique body design of the Series
7000/8000 offers many advantages,
including installation flexibility, and ease
of in line and out of line servicing. These
time saving features are a big plus for pro-
A
cess industries, automated valves and B
welded piping systems by reducing costly
downtime. During maintenance, the actua- C
tor and mounting assemblies remain on the
valve body. The entire valve and actuator
assembly is easily reinstalled. No adjust- Handle (A) Flow-Tek handles feature
ment or reattachment is necessary. a Safety Trigger to prevent acciden-
In Line Servicing To perform in line main- tal movement of ball position. Op-
tenance, remove one of the body bolts eration is easily made with one
through one of the two body hinges, loosen hand. The trigger locks the handle
the remaining bolts and swing the body in the open or closed position. The Secure Mount (C) The integrally cast
up. The valve can swing to the left or right handle lock can be bypassed, if top flange ensures positive actua-
depending on which bolt is removed. All needed, with a small bolt through tor mounting. Secure Mount elimi-
body components can be serviced in this the handle in the bypass position. nates unwanted actuator movement
position without An Anti-Tamper Padlock can be during high cycle or continuous
disturbing the used to secure the handle in posi- duty applications. Actuation equip-
pipe system. tion, preventing unwanted access. ment can be easily and safely re-
Travel Stop (B) Limits the movement moved while the valve is under full
of handle to set 90 intervals, pre- line pressure. Designed to ISO
venting over travel of the ball. 5211 bolting pattern standards.
3
4
Pressure Ratings
Threaded, Socket Weld and Butt Weld:
6
Sizes 1/4 4 ...... 1000 psi WOG
Extended Designed to meet ASME/ANSI
2 Butt Weld End B16.34 pressure rating of Class 300.
9 Connection Sizes 6 12 ........ 400 psi WOG
Designed to meet ASME/ANSI
Item Name Stainless Steel Carbon Steel Qty. B16.34 pressure rating of Class 150.
1 Body ASTM A351 Gr CF8M ASTM A216 Gr WCB 1 Flanged: per Flange Rating, consult factory
2 End Cap ASTM A351 Gr CF8M ASTM A216 Gr WCB 2 Steam Rating: 150 WSP
3 Ball ASTM A351 Gr CF8M ASTM A351 Gr CF8M 1
Vacuum Rating: 29.9 in Hg gauge
4 Seat 15% RPTFE 15% RPTFE 2
Flow-Tek offers the seat, body seal, thrust
5 Stem ASTM A479 Type316 ASTM A479 Type316 1
washer and stem packing as recom-
6 Body Seal TFM TFM 2
mended spare parts. These parts are
7 Spring Washer SS304 SS304
available as a packaged repair kit.
8 Body Nut SS304 SS304
9 Body Bolt / Stud SS304 SS304 4
Pressure / Temperature
10 Anti-Static Device SS316 SS316 2 1200
12 Thrust Washer 50% SS316 + 50% PTFE 50% SS316 + 50% PTFE 1
Pressure (psi)
800
23 Travel Stop Set Sleeve SS304 SS304 1 -50 0 50 100 150 200 250 300 350 400 450 500 550
Temperature (F)
24 Travel Stop Bolt SS304 SS304 1
1/4 - 4 Valves: RPTFE/TFM
25 Handle SS304 SS304 1
1/4 - 4 Valves: UHMWPE
26 Lock Nut SS304 SS304 2
1/4 - 4: 50/50 SS Filled TFE
28 Handle Sleeve Vinyl Plastisol Vinyl Plastisol 1
6-12 Butt Weld Valves: RPTFE
29 Locking Device SS304 SS304 1 ASME Class 150 Flanges
Weld Ends use CF3M 1/4" - 4" Valves: Tek-Fil
Number of Nuts and
Spring Washers:
1/4 2 Valves ... 4 NOTE: Series 8000 Carbon steel valves
2-1/2 Valves ...... 8 are limited to 20F.
4
Extended Range
Components & Materials
For Valve Sizes 3 through 12 21/2, 3 and 4 valves
feature a NAMUR Stem
slot for ease of limit switch
30 mounting.
22
12
21
11
20 13 6
17 4B
5 4A
16 9
10 2
15 3
11 4A
4B
14 6
1/4 2.839 0.374 2.598 1.535 6.496 1.169 1.169 0.315 0.551 0.250 0.366 10-24 8 60 1.8
6 72.1 9.5 66.0 39.0 165.0 29.7 29.7 8.0 14.0 6.35 9.30 6.8 0.8
3/8 2.839 0.50 2.598 1.535 6.496 1.169 1.169 0.315 0.551 0.250 0.366 10-24 8 60 1.8
10 72.1 12.7 66.0 39.0 165.0 29.7 29.7 8.0 14.0 6.35 9.30 6.8 0.8
1/2 2.839 4.39 10.035 9.035 0.591 2.598 1.535 6.496 1.169 1.169 0.315 0.551 0.250 0.366 10-24 32 60 1.8
15 72.1 111.5 254.9 229.5 15.0 66.0 39.0 165.0 29.7 29.7 8.0 14.0 6.35 9.30 6.8 0.8
3/4 3.346 5.80 10.425 9.299 0.787 2.913 1.656 6.496 1.169 1.169 0.315 0.551 0.250 0.366 10-24 54 95 2.3
20 85.0 147.2 264.8 236.2 20.0 74.0 42.05 165.0 29.7 29.7 8.0 14.0 6.35 9.30 10.7 1.06
1 3.620 5.97 10.705 9.476 1.000 3.425 2.047 7.874 1.392 1.392 0.433 0.748 0.315 0.429 1/4-20 105 140 3.4
25 91.96 151.7 271.9 240.7 25.4 87.0 52.0 200.0 35.36 35.36 11.0 19.0 8.0 10.9 15.8 1.52
11/4 4.331 11.213 9.835 1.260 3.622 2.205 7.874 1.392 1.392 0.433 0.748 0.315 0.429 1/4-20 200 195 4.9
32 110.0 284.8 249.8 32.0 92.0 56.0 200.0 35.36 35.36 11.0 19.0 8.0 10.9 22.0 2.22
11/2 4.843 8.03 11.780 10.276 1.496 4.134 2.598 9.843 1.949 1.949 0.551 0.906 0.374 0.618 5/16-18 275 315 7.6
40 123.0 204.0 299.2 261.0 38.0 105.0 66.0 250.0 49.5 49.5 14.0 23.0 9.5 15.7 35.6 3.45
2 5.591 9.04 12.480 10.732 2.000 4.528 2.953 9.843 1.949 1.949 0.551 0.906 0.374 0.618 5/16-18 500 510 11.4
50 142.0 229.6 317.0 272.6 50.8 115.0 75.0 250.0 49.5 49.5 14.0 23.0 9.5 15.7 57.6 5.16
21/2 7.264 12.00 2.559 5.039 3.386 9.843 2.839 2.839 0.689 1.142 0.472 0.748 5/16-18 780 800 21.8
65 184.5 304.8 65.0 128.0 86.0 250.0 72.12 72.12 17.5 29.0 12.0 19.0 90.4 9.91
3 7.953 10.10 12.00 2.992 6.417 3.720 15.354 3.543 1.874 1.752 3.071 0.669 1.102 1/2-13 1150 1100 34.6
80 202.0 256.5 304.8 76.0 163.0 94.5 390.0 90.0 47.6 44.5 78.0 17.0 28.0 124.3 15.7
4 9.055 13.90 12.00 4.016 7.087 4.350 15.354 3.543 1.874 1.752 3.071 0.669 1.102 1/2-13 2100 3600 54.7
100 230.0 353.0 304.8 102.0 180.0 110.5 390.0 90.0 47.6 44.5 78.0 17.0 28.0 406.7 24.8
6 18.00 15.50 5.984 12.205 7.165 43.307 3.375 3.375 1.654 3.543 1.024 1.713 1/2-13 5000 4150 233.7
150 457.2 394.0 152.0 310.0 182.0 1100.0 85.73 85.73 42.0 90.0 26.0 43.5 469.0 106
8 20.50 18.00 7.874 13.504 8.465 43.307 3.375 3.375 1.654 3.543 1.024 1.713 1/2-13 9600 6200 377
200 520.7 457.0 200.0 343.0 215.0 1100.0 85.73 85.73 42.0 90.0 26.0 43.5 700.5 171
10 22.00 21.00 9.843 14.685 9.961 43.307 4.528 4.528 1.969 3.780 1.378 2.165 5/8-11 15000 14700 632.7
250 558.8 533.0 250.0 373.0 253.0 1100.0 115.0 115.0 50.0 96.0 35.0 55.0 1660.9 287
12 25.00 24.00 11.811 16.260 11.535 43.307 4.528 4.528 1.969 3.780 1.378 2.165 5/8-11 21000 22000 CF
300 635.0 610.0 300.0 413.0 293.0 1100.0 115.0 115.0 50.0 96.0 35.0 55.0 2485.7
Dimension A is the length of Valve including End Connections as follows: A1= Threaded, Socket Weld & Sch 40 Butt Weld; A3=Flanged;
A5=Extended Socket Weld; A6=Extended Butt Weld. Note: 1/4-4 Weights are based on Threaded End Connection. 6-12 Weights are
based on Class 150 Flanged ends.
D
D
D
C
C
C
C1
C1 C1
B B B
A A A
Ux4
Ux4 K K
SECURE MOUNT P H M P H M
J L
J L
1/4 2 1/2 VALVES 312 VALVES
6
Dimensions
DIMENSIONS Models 7000 (316SS), 8000 (WCB)
Size
ins mm E1 E2 E3 F1 F2 F3 F5 F6 G1 G2 G3 G5 G6 N S T
1/4 0.551 0.364 0.984 0.540 0.898 0.500
6 14.0 9.25 25.0 13.72 22.8 12.7
3/8 0.689 0.493 0.984 0.675 0.898 0.500
10 17.5 12.52 25.0 17.15 22.8 12.7
1/2 0.854 0.622 0.567 1.102 0.840 3.500 1.142 0.866 0.898 0.500 1.673 4.496 3.996 4 2.380 0.620
15 21.7 15.8 14.4 28.0 21.34 88.9 29.0 22.0 22.8 12.7 42.5 114.2 101.5 60.45 15.75
3/4 1.067 0.824 0.787 1.390 1.050 3.880 1.457 1.102 1.020 0.563 2.244 4.559 3.996 4 2.750 0.620
20 27.1 20.93 20.0 35.3 26.67 98.55 37.0 28.0 25.9 14.3 57.0 115.8 101.5 69.85 15.75
1 1.331 1.049 0.984 1.654 1.315 4.250 1.772 1.339 1.068 0.626 2.244 4.610 3.996 4 3.120 0.620
25 33.8 26.64 25.0 42.0 33.4 107.95 45.0 34.0 27.13 15.9 57.0 117.1 101.5 79.25 15.75
11/4 1.667 1.380 2.047 1.660 2.165 1.693 1.244 0.689 4.685 3.996
32 42.6 35.04 52.0 42.16 55.0 43.0 31.6 17.5 119.0 101.5
11/2 1.913 1.610 1.496 2.362 1.900 5.000 2.441 1.929 1.280 0.752 2.874 4.748 3.996 4 3.880 0.620
40 48.6 40.9 38.0 60.0 48.26 127.0 62.0 49.0 32.5 19.1 73.0 120.6 101.5 98.55 15.75
2 2.406 2.067 2.000 2.913 2.375 6.000 2.913 2.402 1.425 0.874 3.150 4.870 3.996 4 4.750 0.750
50 61.1 52.51 50.8 74.0 60.33 152.4 74.0 61.0 36.2 22.2 80.0 123.7 101.5 120.65 19.05
21/2 2.906 2.461 3.386 2.874 1.949 0.984
65 73.8 62.5 86.0 73.0 49.5 25.0
3 3.535 2.992 2.992 4.173 3.622 7.500 1.969 0.984 3.041 4 6.000 0.750
80 89.8 76.0 76.0 106.0 92.0 190.5 50.0 25.0 77.25 152.40 19.05
4 4.543 4.016 3.996 5.315 4.783 9.000 2.087 1.181 4.508 8 7.500 0.750
100 115.4 102.0 101.5 135.0 121.5 228.6 53.0 30.0 114.5 190.50 19.05
6 6.065 5.984 6.625 11.00 4.866 3.622 8 9.500 0.880
150 154.05 152.0 168.28 279.4 123.6 92.0 241.30 22.35
8 7.981 7.874 8.625 13.50 5.230 3.976 8 11.750 0.880
200 202.72 200.0 219.08 342.9 132.85 101.0 298.45 22.35
10 10.020 9.843 10.75 16.00 4.937 4.429 12 14.250 1.000
250 254.51 250.0 273.05 406.4 125.4 112.5 361.95 25.40
12 11.938 11.811 12.75 19.00 5.138 4.646 12 17.000 1.000
300 303.23 300.0 323.85 482.6 130.5 118.0 431.80 25.40
For Cam Lock, Tube O.D. and Flush Bottom Tank connection dimensions and for other available End Connections, please consult
the Flow-Tek factory. End connections are fully interchangeable and can be used in any combination. Note: Due to design
constraints, 1/4 4 flanged end connections do not meet ANSI take out dimensions.
G3
G2 N x T
F1 F1 E1 F2 E2 F3 S E3
G1 G1 G1
THREADED END SOCKET WELD END SCH 40 BUTT WELD END FLANGED END
7100/8100 7200/8200 7300/8300 7400/8400
Ordering Example:
Body Connection Size Ball/Stem Seat Seals Operator
(316) (NPT) (1) (316) (RPTFE) (RPTFE) Handle
7 1 05 3 R R L