Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Page 1 of 2
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320D EXCAVATOR BZP
Configuration: 320D Excavator BZP00001-UP (MACHINE) POWERED BY C6.4 Engine
i02746971
Installation Procedure
NOTICE
Illustration 1 g01375847
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 5/24/2017
320D Excavator BZP00001-UP (MACHINE) POWERED BY C6.4 Engine(SEBP5228 - ... Page 2 of 2
8. Adjust adjusting screw (11) so that bridge (7) contacts both of the valve ends evenly. Tighten
nut (9) to a torque of 4 1 Nm (35 9 lb in).
Illustration 2 g01375828
14. Adjust the inlet valve lash to 0.250 mm (0.0098 inch). Adjust the exhaust valve lash to 0.400
mm (0.0157 inch). Refer to Testing and Adjusting, "Engine Valve Lash - Test/Adjust".
End By: Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism
Cover - Remove and Install".
Copyright 1993 - 2017 Caterpillar Inc. Wed May 24 13:14:17 UTC+0700 2017
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 5/24/2017