Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Name of Work : INSTALLATION OF 02 Number (200mmX450mm DIA) DEEP TUBE WELL AT SOUTH SIDE OF CAMPUS.
DR RASHID BHABAN AND AZAD R/A
Sl.
DESCRIPTION OF ITEMS QTY. UNIT RATE (TK.) AMOUNT (TK)
No.
1 27.1 Mobilization for test boring or observation well: Transportation
of materials, equipments, tools and plants and boring rig to work
site. Construction of derrick and dismantling the same. Cleaning
the site after completion of the work accepted by the Engineer.
i) For borehole # 1
27.2.1 a) From 0.0 m to 50 m = 50 m 50.00 rm. 154.00 7,700.00
27.2.2 b) From 50 m to100 m = 50 m 50.00 rm. 177.00 8,850.00
27.2.3 c) From 100 m to 152 m = 52 m 52.00 rm. 203.00 10,556.00
27.2.4 d) From 152 m to 200 m = 48 m 48.00 rm. 234.00 11,232.00
ii) For borehole # 2( If necessary)
a) From 0.0 m to 50 m = 50 m 50.00 rm. 154.00 7,700.00
b) From 50 m to100 m = 50 m 50.00 rm. 177.00 8,850.00
c) From 100 m to 152 m = 52 m 52.00 rm. 203.00 10,556.00
d) From 152 m to 200 m = 48 m 48.00 rm. 234.00 11,232.00
3 Installation of tube-well fixture for observation well:
Supplying and lowering of 40/38 mm inside dia best quality
uPVC pressure tube well pipe having specific gravity 1.35 - 1.45,
wall thickness 2.5 mm - 3.0 mm, capability to withstand a
minimum hydrostatic pressure of 170 psi for 1 hr. fitted and fixed
in position with all accessories, uPVC sand trap of length 3.00
with uPVC strainer of desired slot installing in or at mid depth of
the most suitable water bearing strata. 38 mm dia G.I. pipe of
best quality of length 1.52 m with M.S. welded flat bar on each
side to prevent from rotation up to desired depth, fitting fixing the
best quality No. 6 C.I. head hand-pump etc including the cost of
solvent cement, socket adaptor, filling medium sand up to 18.00
m above strainer and the remaining portion with available soil
from boring etc. complete as per standard specification and
accepted by the Engineer.
a) For borehole # 1
27.3.3 (i) 38/40 mm dia water grade uPVC pipe having thickness 2.5-
3.00 mm. For bore hole # 1 150.00 rm. 141.00 21,150.00
27.3.4 (ii) 38/40 mm dia water grade uPVC strainer having wall
thickness 2.5-3.00 mm For bore hole # 1 50.00 rm. 175.00 8,750.00
27.2.1 (i) Well up to 200 meter depth, For 2 No. test tube-well. 200.00 rm. 55.57 11,114.00
27.2.2 (ii) Well beyond 200 meter depth, For 1 No. test tube-well. 30.00 rm. 73.35 2,200.50
left over test bore permanently, including carrying water and soil
samples under direct responsibility of Engineer-in-charge to
BRTC, BUET or other reputed laboratory, approved by the
authority, submitting the report and design details all complete
and accepted by the Engineer and maintaining the mobilized
tools and plant at site till satisfactory test results are found (if not,
next test bore may be executed with the approval of concern
S.E. / Design Office)Total No. of test on water: 11 types of test x
1 test bore x one set sample (3 specimen) = 11 Nos. test (each
specimen 1.5 liter of water)Sieve analysis: min 9 Nos. Sample x
one test x One bore = 9 Nos. test (Samples are of 1 kg dry wt.
each)"There are about 55 (fifty-five) tests for potable water
Quality Standard according to Bangladesh Environment
Conservation Rules-12 (Schedule-3), 1997, under ECA 1995 of
Ministry of Environment and Forest. Therefore, additional test/
tests on water or sieve analysis of soil if required, other than the
above specified 12
(twelve) tests,
27.50.1 a) 200 mm dia MS cap 6 mm thick for blind pipe / sand trap. 1.00 each 1,581.00 1,581.00
MR b) 3m long 200 mm dia heavy type GI pipe (National tube or
equivalent) with one end sealed with welded 6mm thick steel
plate ( Bail plug) and other end with thread and socket joint or
similar.
3.00 rm. 31,834.00 95,502.00
MR c) 200 mm dia strainer of Slot as per design including taging
4 Nos 12 mm dia MS rod continuously. Stainless steel strainer
of continuous slot .The stainer shall be Johnson (foreign made)
or equivalent product having a minimum weight of 12.3 kg per
meter. Based on design of Tube well.
50.00 rm. 34,500.00 1,725,000.00
27.64.2 75 mm dia 4.85 mm thick tube well pipe and blank G.I. pipe 3.00 rm. 1,328.00 3,984.00
27.64.7 Centralizer made with 12 mm dia M.S. rod of approved design 20.00 each 364.00 7,280.00
MR 500 mm dia M.S. cap of 6 mm thick for housing pipe covering.
1.00 each 5,000.00 5,000.00
20 MR Verticality test of the well including supplying verticality test
equipment, labour, etc. after sinking of the well but before
placement of the shrouding materials and after completion of the
well including rectification of any deviation from the specified
limit etc. all complete as per specification and direction of the
Engineer-in-Charge. (Ref: Technical Specification, Clause #
7A.5.3).
1.00 L.S 25,000.00 25,000.00
21 MR Making a clay seal above the filter pack with clay balls made of
50% local puddled clay (clay mixed with 3-5% puddloo) and 50%
bentonite as per specification and direction of the Engineer- in
Charge and as per attached Drawing (Up to 10m of housing
pipe).
1.00 L.S 25,000.00 25,000.00
Sub-Total Tk. 6,471,844.40
02 Number Tk. 12,943,688.80
Add 5% Contingency Tk. 647,184.44
Grand Total Tk. 13,590,873.24
Say Tk. 13,590,900.00
i) For borehole # 1
27.2.1 a) From 0.0 m to 50 m = 50 m 50.00 rm. 154.00 7,700.00
27.2.2 b) From 50 m to100 m = 50 m 50.00 rm. 177.00 8,850.00
27.2.3 c) From 100 m to 152 m = 52 m 52.00 rm. 203.00 10,556.00
27.2.4 d) From 152 m to 200 m = 48 m 48.00 rm. 234.00 11,232.00
ii) For borehole # 2( If necessary)
a) From 0.0 m to 50 m = 50 m 50.00 rm. 154.00 7,700.00
b) From 50 m to100 m = 50 m 50.00 rm. 177.00 8,850.00
c) From 100 m to 152 m = 52 m 52.00 rm. 203.00 10,556.00
d) From 152 m to 200 m = 48 m 48.00 rm. 234.00 11,232.00
3 Installation of tube-well fixture for observation well:
Supplying and lowering of 40/38 mm inside dia best quality
uPVC pressure tube well pipe having specific gravity 1.35 - 1.45,
wall thickness 2.5 mm - 3.0 mm, capability to withstand a
minimum hydrostatic pressure of 170 psi for 1 hr. fitted and fixed
in position with all accessories, uPVC sand trap of length 3.00
with uPVC strainer of desired slot installing in or at mid depth of
the most suitable water bearing strata. 38 mm dia G.I. pipe of
best quality of length 1.52 m with M.S. welded flat bar on each
side to prevent from rotation up to desired depth, fitting fixing the
best quality No. 6 C.I. head hand-pump etc including the cost of
solvent cement, socket adaptor, filling medium sand up to 18.00
m above strainer and the remaining portion with available soil
from boring etc. complete as per standard specification and
accepted by the Engineer.
a) For borehole # 1
27.3.3 (i) 38/40 mm dia water grade uPVC pipe having thickness 2.5-
3.00 mm. For bore hole # 1 150.00 rm. 141.00 21,150.00
27.3.4 (ii) 38/40 mm dia water grade uPVC strainer having wall
thickness 2.5-3.00 mm For bore hole # 1 50.00 rm. 175.00 8,750.00
27.31.1 iii) Fitting, fixing No.6 Hand pump set including all necessary
accessories etc. complete and accepted by the engineer.
1.00 each 2,738.00 2,738.00
file:///conversion/tmp/scratch/365023380.xls 7 of 27
Sl.
DESCRIPTION OF ITEMS QTY. UNIT RATE (TK.) AMOUNT (TK)
No.
27.3.2 iv) 38/40 mm dia heavy type GI pipe conforming to standerd BS-
1387 &BDS-1031 having chemical composition (in %) carbon
0.17-0.25, Manganese 0.95-1.2, sulphur 0.060 max,
Phosphorous 0.060 max, tensile properties : minimum Yield
strengh 188 Mpa, Minimum Tensile Strengh 313 Mpa and
marking for a) Manufactuer b) Material c) Wall thickness
d)Nominal outside dia e)Intended use etc. on the body of pipe
having wall thckness 2.90mm, weight 3.517 kg/m capability to
withstand 50 kg/sqcm hydraulic pressure.
1.52 rm. 680.00 1,033.60
27.3.5 v) 38/40 mm dia uPVC socket adapter 1.00 each 87.00 87.00
27.3.6 vi) Best qualily 38mm dia uPVC cap 1.00 each 66.00 66.00
b) For borehole # 2 ( If necessary)
27.3.4 (i) 38/40 mm dia water grade uPVC pipe having wall thickness
2.5-3.00 mm. For bore hole # 2. 150.00 rm. 141.00 21,150.00
27.3.5 (ii) 38/40 mm dia water grade uPVC strainer having wall
thickness 2.5-3.00 mm For bore hole # 2. 50.00 rm. 175.00 8,750.00
27.3.1 iii) Fitting, fixing No.6 Hand pump set including all necessaries
etc. complete and accepted by the engineer.For bore hole # 2. 1.00 each 2,738.00 2,738.00
27.3.2 iv) 38/40 mm dia heavy type GI pipe conforming to standerd BS-
1387 & BDS-1031 having chemical composition (in %) carbon
0.17-0.25, Manganese 0.95-1.20, sulphur 0.060 max,
Phosphorous 0.060 max, tensile properties : minimum Yield
strengh 188 Mpa, Minimum Tensile Strengh 313 Mpa and
marking for a) Manufactuer b) Material c) Wall thickness
d)Nominal outside dia e)Intended use etc. on the body of pipe
having wall thckness 2.90mm, weight 3.517 kg/m capability to
withstand 50 kg/sqcm hydraulic pressure.
27.2.1 (i) Well up to 200 meter depth, For 2 No. test tube-well. 200.00 rm. 35.57 7,114.00
27.2.2 (ii) Well beyond 200 meter depth, For 1 No. test tube-well. 30.00 rm. 53.35 1,600.50
file:///conversion/tmp/scratch/365023380.xls 8 of 27
Sl.
DESCRIPTION OF ITEMS QTY. UNIT RATE (TK.) AMOUNT (TK)
No.
6 27.5 Furnishing design of a production well by testing of water and
soil samples from a test bores up to 350m depth collecting
samples of water from the best suitable aquifer, filling in
sterilized air-tight glass bottles having no air space inside;
collecting soil (sand, solids etc) at 3 m interval and at each
change of soil strata from the bores, arranging them in the cell of
a box in an orderly manner. carrying out test of water for (1) pH,
(2) CO2 (3) Chloride, (4) Fluoride, (5) Iron, (6) Manganese, (7)
Nitrate-Nitrogen, (8)Total alkalinity, (9) Total hardness, (10)
Arsenic, (11) Turbidity, followed by test reports along with
Bangladesh Standards of potable water and (12) Sieve analysis
on soils throughout a bore, leading to ascertain the best suitable
sustained aquifers, depths and slot sizes of strainer, types and
dia of tube well for specific yield, thickness of shrouding around
strainer, fineness modulus of shrouding materials, mechanical
units (pumps, compressor) for testing and operation of the tube
well, maintaining test bore functional till tube well installation,
testing etc. is finished, finally filling and sealing the
left over test bore permanently, including carrying water and soil
samples under direct responsibility of Engineer-in-charge to
BRTC, BUET or other reputed laboratory, approved by the
authority, submitting the report and design details all complete
and accepted by the Engineer and maintaining the mobilized
tools and plant at site till satisfactory test results are found (if not,
next test bore may be executed with the approval of concern
S.E. / Design Office)Total No. of test on water: 11 types of test x
1 test bore x one set sample (3 specimen) = 11 Nos. test (each
specimen 1.5 liter of water)Sieve analysis: min 9 Nos. Sample x
one test x One bore = 9 Nos. test (Samples are of 1 kg dry wt.
each)"There are about 55 (fifty-five) tests for potable water
Quality Standard according to Bangladesh Environment
Conservation Rules-12 (Schedule-3), 1997, under ECA 1995 of
Ministry of Environment and Forest. Therefore, additional test/
tests on water or sieve analysis of soil if required, other than the
above specified 12
(twelve) tests,
file:///conversion/tmp/scratch/365023380.xls 9 of 27
Sl.
DESCRIPTION OF ITEMS QTY. UNIT RATE (TK.) AMOUNT (TK)
No.
8 27.8 Preparation and making gravel pack around the tube well
fixtures with supply of designed graded pea gravels free from
any substance harmful to pipe and health confirmed by test
(Passing through 10 mesh and retained on 40 mesh) including
sieving, washing etc. complete as per standard specification and
accepted by the Engineer. (The rate is inclusive of the cost of
extra amount required for caving and extra depth below the tube
well fixtures, shrouding should not be more than 15 m above the
strainer and measurement should be allowed from bottom of the
tube-well fixture to top of the gravel pack)
35.00 cum. 3,087.00 108,045.00
9 27.9 Making a sanitary seal up to a minimum depth of 6 meter from
G.L. or as specified including the supply of approved quality of
cement, sand and khoa (12 mm down graded) in ratio (1:1:5:3)
as per standard specification and accepted by the Engineer.
4.10 cum. 7,982.00 32,726.20
10 27.49 Boring: Execution of 800 mm dia boring through all sorts of
strata by reverse circulation or any other approved method
(Method other than reverse circulation is to be applied only for
wells deeper than 152 meter). For boring 800 mm dia vertical
hole up to designed depth and collection of soil samples at every
3 meter interval and at every change of formation including
sinking and withdrawing necessary casing pipe and all
necessary arrangements complete as per specification and
accepted by the Engineer. (Measurement will be allowed form
G.L. to bottom of the blind pipe and the rate is required for
caving and siltation)
27.50.1 a) 200 mm dia MS cap 6 mm thick for blind pipe / sand trap. 1.00 each 1,581.00 1,581.00
MR b) 3m long 200 mm dia heavy type GI pipe (National tube or
equivalent) with one end sealed with welded 6mm thick steel
plate ( Bail plug) and other end with thread and socket joint or
similar.
3.00 rm. 31,834.00 95,502.00
MR c) 200 mm dia strainer of Slot as per design including taging
4 Nos 12 mm dia MS rod continuously. Stainless steel strainer
of continuous slot .The stainer shall be Johnson (foreign made)
or equivalent product having a minimum weight of 12.3 kg per
meter. Based on design of Tube well.
50.00 rm. 24,500.00 1,225,000.00
27.50.2 200 mm dia 6 mm thick tube well pipe and blank G.I. pipe of wt.
33.45 kg per meter can withstand minimum 700 psi hydraulic
pressure. 15.00 rm. 7,005.00 105,075.00
file:///conversion/tmp/scratch/365023380.xls 10 of 27
Sl.
DESCRIPTION OF ITEMS QTY. UNIT RATE (TK.) AMOUNT (TK)
No.
27.50.4 200 mm x 450 mm dia 6 mm thick M.S. reducer.
1.00 rm. 13,118.00 13,118.00
MR 450 mm dia 6 mm thick M.S. housing pipe (Seamless)
107.00 rm. 21,500.00 2,300,500.00
12 27.51 Complete installation of 200 mm dia deep tubewell fixtures
such as expanded top pipes, reducer, tube well pipes, strainer,
blind pipe, pipe caps etc. fitting,and fixing socket ,welded and
additional welding with fibre and placing in position with proper
size MS centralizer @ 3 metre c/c in strainer position including
blind pipe etc. complete as per standard practice and accepted
by the Engineer.
160.00 rm. 383.00 61,280.00
13 27.52 Complete development of the tube well by suitable air
compressor and pump of suitable capacity by alternate surging
and pumping until satisfactory yield, sand free water and the
turbidity condition is reached using necessary quantity of calgon
and conducting step draw down test before and after the
development as per specification and accepted by the Engineer.
(Development should be started within 24 hours of completion of
shrouding).
file:///conversion/tmp/scratch/365023380.xls 11 of 27
Sl.
DESCRIPTION OF ITEMS QTY. UNIT RATE (TK.) AMOUNT (TK)
No.
27.64.2 75 mm dia 4.85 mm thick tube well pipe and blank G.I. pipe 3.00 rm. 1,328.00 3,984.00
27.64.7 Centralizer made with 12 mm dia M.S. rod of approved design 20.00 each 364.00 7,280.00
MR 500 mm dia M.S. cap of 6 mm thick for housing pipe covering.
1.00 each 5,000.00 5,000.00
20 MR Verticality test of the well including supplying verticality test
equipment, labour, etc. after sinking of the well but before
placement of the shrouding materials and after completion of the
well including rectification of any deviation from the specified
limit etc. all complete as per specification and direction of the
Engineer-in-Charge. (Ref: Technical Specification, Clause #
7A.5.3).
1.00 L.S 25,000.00 25,000.00
21 MR Making a clay seal above the filter pack with clay balls made of
50% local puddled clay (clay mixed with 3-5% puddloo) and 50%
bentonite as per specification and direction of the Engineer- in
Charge and as per attached Drawing (Up to 10m of housing
pipe).
1.00 L.S 25,000.00 25,000.00
Sub-Total Tk. 5,200,544.40
Add 5% Contingency Tk. 260,027.22
G. Total = Tk. 5,460,571.62
Say Tk. 5,460,600.00
ABSTRACT
DEEP TUBE WELL A Tk. 5,460,600.00
DEEP TUBE WELL B Tk. 5,460,600.00
GRAND TOTAL Tk. 10,921,200.00
file:///conversion/tmp/scratch/365023380.xls 12 of 27
BANGLADESH UNIVERSITY OF ENGINEERING AND TECHNOLOGY, DHAKA.
Name of Work : INSTALLATION OF 200mmX450mm DIA DEEP TUBE WELL AT ANYWHERE WITHIN BUET CAMPUS.
( TUBE WELL A )
Sl.
DESCRIPTION OF ITEMS QTY. UNIT RATE (TK.) AMOUNT (TK)
No.
1 Mobilization for test boring or observation well: Transportation 1.00 set
of materials, equipments, tools and plants and boring rig to work
site. Construction of derrick and dismantling the same. Cleaning
the site after completion of the work accepted by the Engineer.
i) For borehole # 1
file:///conversion/tmp/scratch/365023380.xls 13 of 27
Sl.
DESCRIPTION OF ITEMS QTY. UNIT RATE (TK.) AMOUNT (TK)
No.
3 Installation of tube-well fixture for observation well:
Supplying and lowering of 40/38 mm inside dia best quality
uPVC pressure tube well pipe having specific gravity 1.35 - 1.45,
wall thickness 2.5 mm - 3.0 mm, capability to withstand a
minimum hydrostatic pressure of 170 psi for 1 hr. fitted and fixed
in position with all accessories, uPVC sand trap of length 3.00
with uPVC strainer of desired slot installing in or at mid depth of
the most suitable water bearing strata. 38 mm dia G.I. pipe of
best quality of length 1.52 m with M.S. welded flat bar on each
side to prevent from rotation up to desired depth, fitting fixing the
best quality No. 6 C.I. head hand-pump etc including the cost of
solvent cement, socket adaptor, filling medium sand up to 18.00
m above strainer and the remaining portion with available soil
from boring etc. complete as per standard specification and
accepted by the Engineer.
a) For borehole # 1
(i) 38/40 mm dia water grade uPVC pipe having thickness 2.5- 150.00 rm.
3.00 mm. For bore hole # 1
(ii) 38/40 mm dia water grade uPVC strainer having wall 50.00 rm.
thickness 2.5-3.00 mm For bore hole # 1
iii) Fitting, fixing No.6 Hand pump set including all necessary 1.00 each
accessories etc. complete and accepted by the engineer.
iv) 38/40 mm dia heavy type GI pipe conforming to standerd BS- 1.52 rm.
1387 &BDS-1031 having chemical composition (in %) carbon
0.17-0.25, Manganese 0.95-1.2, sulphur 0.060 max,
Phosphorous 0.060 max, tensile properties : minimum Yield
strengh 188 Mpa, Minimum Tensile Strengh 313 Mpa and
marking for a) Manufactuer b) Material c) Wall thickness
d)Nominal outside dia e)Intended use etc. on the body of pipe
having wall thckness 2.90mm, weight 3.517 kg/m capability to
withstand 50 kg/sqcm hydraulic pressure.
(i) 38/40 mm dia water grade uPVC pipe having wall thickness 150.00 rm.
2.5-3.00 mm. For bore hole # 2.
(ii) 38/40 mm dia water grade uPVC strainer having wall 50.00 rm.
thickness 2.5-3.00 mm For bore hole # 2.
file:///conversion/tmp/scratch/365023380.xls 14 of 27
Sl.
DESCRIPTION OF ITEMS QTY. UNIT RATE (TK.) AMOUNT (TK)
No.
iii) Fitting, fixing No.6 Hand pump set including all necessaries 1.00 each
etc. complete and accepted by the engineer.For bore hole # 2.
iv) 38/40 mm dia heavy type GI pipe conforming to standerd BS- 1.52 rm.
1387 & BDS-1031 having chemical composition (in %) carbon
0.17-0.25, Manganese 0.95-1.20, sulphur 0.060 max,
Phosphorous 0.060 max, tensile properties : minimum Yield
strengh 188 Mpa, Minimum Tensile Strengh 313 Mpa and
marking for a) Manufactuer b) Material c) Wall thickness
d)Nominal outside dia e)Intended use etc. on the body of pipe
having wall thckness 2.90mm, weight 3.517 kg/m capability to
withstand 50 kg/sqcm hydraulic pressure.
v) 38/40 mm dia uPVC socket adapter. For bore hole # 2. 1.00 each
vi) Best qualily 38mm dia uPVC cap. For bore hole # 2. 1.00 each
4 Filling the top 0.60 m of the borehole around the top pipe with 1.00 each
sanitary seal of concrete of proportion 1:2:4 as per design
accepted by the engineer.
(i) Well up to 200meter depth, For 1 No. test tube-well. 200.00 rm.
(ii) Well beyond 200 meter depth, For 2 No. test tube-well. 30.00 rm.
(i) Well up to 200 meter depth, For 2 No. test tube-well. 200.00 rm.
(ii) Well beyond 200 meter depth, For 1 No. test tube-well. 30.00 rm.
file:///conversion/tmp/scratch/365023380.xls 15 of 27
Sl.
DESCRIPTION OF ITEMS QTY. UNIT RATE (TK.) AMOUNT (TK)
No.
6 Furnishing design of a production well by testing of water and
soil samples from a test bores up to 350m depth collecting
samples of water from the best suitable aquifer, filling in
sterilized air-tight glass bottles having no air space inside;
collecting soil (sand, solids etc) at 3 m interval and at each
change of soil strata from the bores, arranging them in the cell of
a box in an orderly manner. carrying out test of water for (1) pH,
(2) CO2 (3) Chloride, (4) Fluoride, (5) Iron, (6) Manganese, (7)
Nitrate-Nitrogen, (8)Total alkalinity, (9) Total hardness, (10)
Arsenic, (11) Turbidity, followed by test reports along with
Bangladesh Standards of potable water and (12) Sieve analysis
on soils throughout a bore, leading to ascertain the best suitable
sustained aquifers, depths and slot sizes of strainer, types and
dia of tube well for specific yield, thickness of shrouding around
strainer, fineness modulus of shrouding materials, mechanical
units (pumps, compressor) for testing and operation of the tube
well, maintaining test bore functional till tube well installation,
testing etc. is finished, finally filling and sealing the
left over test bore permanently, including carrying water and soil
samples under direct responsibility of Engineer-in-charge to
BRTC, BUET or other reputed laboratory, approved by the
authority, submitting the report and design details all complete
and accepted by the Engineer and maintaining the mobilized
tools and plant at site till satisfactory test results are found (if not,
next test bore may be executed with the approval of concern
S.E. / Design Office)Total No. of test on water: 11 types of test x
1 test bore x one set sample (3 specimen) = 11 Nos. test (each
specimen 1.5 liter of water)Sieve analysis: min 9 Nos. Sample x
one test x One bore = 9 Nos. test (Samples are of 1 kg dry wt.
each)"There are about 55 (fifty-five) tests for potable water
Quality Standard according to Bangladesh Environment
Conservation Rules-12 (Schedule-3), 1997, under ECA 1995 of
Ministry of Environment and Forest. Therefore, additional test/
tests on water or sieve analysis of soil if required, other than the
above specified 12
(twelve) tests,
file:///conversion/tmp/scratch/365023380.xls 16 of 27
Sl.
DESCRIPTION OF ITEMS QTY. UNIT RATE (TK.) AMOUNT (TK)
No.
8 Preparation and making gravel pack around the tube well 35.00 cum.
fixtures with supply of designed graded pea gravels free from
any substance harmful to pipe and health confirmed by test
(Passing through 10 mesh and retained on 40 mesh) including
sieving, washing etc. complete as per standard specification and
accepted by the Engineer. (The rate is inclusive of the cost of
extra amount required for caving and extra depth below the tube
well fixtures, shrouding should not be more than 15 m above the
strainer and measurement should be allowed from bottom of the
tube-well fixture to top of the gravel pack)
a) 200 mm dia MS cap 6 mm thick for blind pipe / sand trap. 1.00 each
file:///conversion/tmp/scratch/365023380.xls 17 of 27
Sl.
DESCRIPTION OF ITEMS QTY. UNIT RATE (TK.) AMOUNT (TK)
No.
b) 3m long 200 mm dia heavy type GI pipe (National tube or 3.00 rm.
equivalent) with one end sealed with welded 6mm thick steel
plate ( Bail plug) and other end with thread and socket joint or
similar.
c) 200 mm dia strainer of Slot as per design including taging 50.00 rm.
4 Nos 12 mm dia MS rod continuously. Stainless steel strainer
of continuous slot .The stainer shall be Johnson (foreign made)
or equivalent product having a minimum weight of 12.3 kg per
meter. Based on design of Tube well.
200 mm dia 6 mm thick tube well pipe and blank G.I. pipe of wt. 15.00 rm.
33.45 kg per meter can withstand minimum 700 psi hydraulic
pressure.
200 mm x 450 mm dia 6 mm thick M.S. reducer. 1.00 rm.
file:///conversion/tmp/scratch/365023380.xls 18 of 27
Sl.
DESCRIPTION OF ITEMS QTY. UNIT RATE (TK.) AMOUNT (TK)
No.
17 Filling of the borehole around the tube well from top of the 90.00 rm.
shrouding up to the bottom of sanitary seal by withdrawn
selected soil or local clay free from any substances harmful to
pipes and health as per standard specification and accepted by
the Engineer.
18 Water jetting / positive back wash air lift development using 45.00 rm.
fresh water etc. All completer as per specification and direction
of the E/C.
19 Supplying the following tube-well fixtures at working site as
per standard practice and accepted by the Engineer.(The
quantity of materials will be decided on the basis of final design
of production Tube well)
75 mm dia 4.85 mm thick tube well pipe and blank G.I. pipe 3.00 rm.
Centralizer made with 12 mm dia M.S. rod of approved design 20.00 each
500 mm dia M.S. cap of 6 mm thick for housing pipe covering. 1.00 each
20 Verticality test of the well including supplying verticality test 1.00 L.S
equipment, labour, etc. after sinking of the well but before
placement of the shrouding materials and after completion of the
well including rectification of any deviation from the specified
limit etc. all complete as per specification and direction of the
Engineer-in-Charge. (Ref: Technical Specification, Clause #
7A.5.3).
21 Making a clay seal above the filter pack with clay balls made of 1.00 L.S
50% local puddled clay (clay mixed with 3-5% puddloo) and 50%
bentonite as per specification and direction of the Engineer- in
Charge and as per attached Drawing (Up to 10m of housing
pipe).
Total (Tk)
file:///conversion/tmp/scratch/365023380.xls 19 of 27
BANGLADESH UNIVERSITY OF ENGINEERING AND TECHNOLOGY, DHAKA.
Name of Work : INSTALLATION OF 200mmX450mm DIA DEEP TUBE WELL AT ANYWHERE WITHIN BUET CAMPUS.
( TUBE WELL B )
Sl.
DESCRIPTION OF ITEMS QTY. UNIT RATE (TK.) AMOUNT (TK)
No.
1 Mobilization for test boring or observation well: Transportation 1.00 set
of materials, equipments, tools and plants and boring rig to work
site. Construction of derrick and dismantling the same. Cleaning
the site after completion of the work accepted by the Engineer.
i) For borehole # 1
file:///conversion/tmp/scratch/365023380.xls 20 of 27
Sl.
DESCRIPTION OF ITEMS QTY. UNIT RATE (TK.) AMOUNT (TK)
No.
3 Installation of tube-well fixture for observation well:
Supplying and lowering of 40/38 mm inside dia best quality
uPVC pressure tube well pipe having specific gravity 1.35 - 1.45,
wall thickness 2.5 mm - 3.0 mm, capability to withstand a
minimum hydrostatic pressure of 170 psi for 1 hr. fitted and fixed
in position with all accessories, uPVC sand trap of length 3.00
with uPVC strainer of desired slot installing in or at mid depth of
the most suitable water bearing strata. 38 mm dia G.I. pipe of
best quality of length 1.52 m with M.S. welded flat bar on each
side to prevent from rotation up to desired depth, fitting fixing the
best quality No. 6 C.I. head hand-pump etc including the cost of
solvent cement, socket adaptor, filling medium sand up to 18.00
m above strainer and the remaining portion with available soil
from boring etc. complete as per standard specification and
accepted by the Engineer.
a) For borehole # 1
(i) 38/40 mm dia water grade uPVC pipe having thickness 2.5- 150.00 rm.
3.00 mm. For bore hole # 1
(ii) 38/40 mm dia water grade uPVC strainer having wall 50.00 rm.
thickness 2.5-3.00 mm For bore hole # 1
iii) Fitting, fixing No.6 Hand pump set including all necessary 1.00 each
accessories etc. complete and accepted by the engineer.
iv) 38/40 mm dia heavy type GI pipe conforming to standerd BS- 1.52 rm.
1387 &BDS-1031 having chemical composition (in %) carbon
0.17-0.25, Manganese 0.95-1.2, sulphur 0.060 max,
Phosphorous 0.060 max, tensile properties : minimum Yield
strengh 188 Mpa, Minimum Tensile Strengh 313 Mpa and
marking for a) Manufactuer b) Material c) Wall thickness
d)Nominal outside dia e)Intended use etc. on the body of pipe
having wall thckness 2.90mm, weight 3.517 kg/m capability to
withstand 50 kg/sqcm hydraulic pressure.
(i) 38/40 mm dia water grade uPVC pipe having wall thickness 150.00 rm.
2.5-3.00 mm. For bore hole # 2.
(ii) 38/40 mm dia water grade uPVC strainer having wall 50.00 rm.
thickness 2.5-3.00 mm For bore hole # 2.
file:///conversion/tmp/scratch/365023380.xls 21 of 27
Sl.
DESCRIPTION OF ITEMS QTY. UNIT RATE (TK.) AMOUNT (TK)
No.
iii) Fitting, fixing No.6 Hand pump set including all necessaries 1.00 each
etc. complete and accepted by the engineer.For bore hole # 2.
iv) 38/40 mm dia heavy type GI pipe conforming to standerd BS- 1.52 rm.
1387 & BDS-1031 having chemical composition (in %) carbon
0.17-0.25, Manganese 0.95-1.20, sulphur 0.060 max,
Phosphorous 0.060 max, tensile properties : minimum Yield
strengh 188 Mpa, Minimum Tensile Strengh 313 Mpa and
marking for a) Manufactuer b) Material c) Wall thickness
d)Nominal outside dia e)Intended use etc. on the body of pipe
having wall thckness 2.90mm, weight 3.517 kg/m capability to
withstand 50 kg/sqcm hydraulic pressure.
v) 38/40 mm dia uPVC socket adapter. For bore hole # 2. 1.00 each
vi) Best qualily 38mm dia uPVC cap. For bore hole # 2. 1.00 each
4 Filling the top 0.60 m of the borehole around the top pipe with 1.00 each
sanitary seal of concrete of proportion 1:2:4 as per design
accepted by the engineer.
(i) Well up to 200meter depth, For 1 No. test tube-well. 200.00 rm.
(ii) Well beyond 200 meter depth, For 2 No. test tube-well. 30.00 rm.
(i) Well up to 200 meter depth, For 2 No. test tube-well. 200.00 rm.
(ii) Well beyond 200 meter depth, For 1 No. test tube-well. 30.00 rm.
file:///conversion/tmp/scratch/365023380.xls 22 of 27
Sl.
DESCRIPTION OF ITEMS QTY. UNIT RATE (TK.) AMOUNT (TK)
No.
6 Furnishing design of a production well by testing of water and
soil samples from a test bores up to 350m depth collecting
samples of water from the best suitable aquifer, filling in
sterilized air-tight glass bottles having no air space inside;
collecting soil (sand, solids etc) at 3 m interval and at each
change of soil strata from the bores, arranging them in the cell of
a box in an orderly manner. carrying out test of water for (1) pH,
(2) CO2 (3) Chloride, (4) Fluoride, (5) Iron, (6) Manganese, (7)
Nitrate-Nitrogen, (8)Total alkalinity, (9) Total hardness, (10)
Arsenic, (11) Turbidity, followed by test reports along with
Bangladesh Standards of potable water and (12) Sieve analysis
on soils throughout a bore, leading to ascertain the best suitable
sustained aquifers, depths and slot sizes of strainer, types and
dia of tube well for specific yield, thickness of shrouding around
strainer, fineness modulus of shrouding materials, mechanical
units (pumps, compressor) for testing and operation of the tube
well, maintaining test bore functional till tube well installation,
testing etc. is finished, finally filling and sealing the
left over test bore permanently, including carrying water and soil
samples under direct responsibility of Engineer-in-charge to
BRTC, BUET or other reputed laboratory, approved by the
authority, submitting the report and design details all complete
and accepted by the Engineer and maintaining the mobilized
tools and plant at site till satisfactory test results are found (if not,
next test bore may be executed with the approval of concern
S.E. / Design Office)Total No. of test on water: 11 types of test x
1 test bore x one set sample (3 specimen) = 11 Nos. test (each
specimen 1.5 liter of water)Sieve analysis: min 9 Nos. Sample x
one test x One bore = 9 Nos. test (Samples are of 1 kg dry wt.
each)"There are about 55 (fifty-five) tests for potable water
Quality Standard according to Bangladesh Environment
Conservation Rules-12 (Schedule-3), 1997, under ECA 1995 of
Ministry of Environment and Forest. Therefore, additional test/
tests on water or sieve analysis of soil if required, other than the
above specified 12
(twelve) tests,
file:///conversion/tmp/scratch/365023380.xls 23 of 27
Sl.
DESCRIPTION OF ITEMS QTY. UNIT RATE (TK.) AMOUNT (TK)
No.
8 Preparation and making gravel pack around the tube well 35.00 cum.
fixtures with supply of designed graded pea gravels free from
any substance harmful to pipe and health confirmed by test
(Passing through 10 mesh and retained on 40 mesh) including
sieving, washing etc. complete as per standard specification and
accepted by the Engineer. (The rate is inclusive of the cost of
extra amount required for caving and extra depth below the tube
well fixtures, shrouding should not be more than 15 m above the
strainer and measurement should be allowed from bottom of the
tube-well fixture to top of the gravel pack)
a) 200 mm dia MS cap 6 mm thick for blind pipe / sand trap. 1.00 each
file:///conversion/tmp/scratch/365023380.xls 24 of 27
Sl.
DESCRIPTION OF ITEMS QTY. UNIT RATE (TK.) AMOUNT (TK)
No.
b) 3m long 200 mm dia heavy type GI pipe (National tube or 3.00 rm.
equivalent) with one end sealed with welded 6mm thick steel
plate ( Bail plug) and other end with thread and socket joint or
similar.
c) 200 mm dia strainer of Slot as per design including taging 50.00 rm.
4 Nos 12 mm dia MS rod continuously. Stainless steel strainer
of continuous slot .The stainer shall be Johnson (foreign made)
or equivalent product having a minimum weight of 12.3 kg per
meter. Based on design of Tube well.
200 mm dia 6 mm thick tube well pipe and blank G.I. pipe of wt. 15.00 rm.
33.45 kg per meter can withstand minimum 700 psi hydraulic
pressure.
200 mm x 450 mm dia 6 mm thick M.S. reducer. 1.00 rm.
file:///conversion/tmp/scratch/365023380.xls 25 of 27
Sl.
DESCRIPTION OF ITEMS QTY. UNIT RATE (TK.) AMOUNT (TK)
No.
17 Filling of the borehole around the tube well from top of the 90.00 rm.
shrouding up to the bottom of sanitary seal by withdrawn
selected soil or local clay free from any substances harmful to
pipes and health as per standard specification and accepted by
the Engineer.
18 Water jetting / positive back wash air lift development using 45.00 rm.
fresh water etc. All completer as per specification and direction
of the E/C.
19 Supplying the following tube-well fixtures at working site as
per standard practice and accepted by the Engineer.(The
quantity of materials will be decided on the basis of final design
of production Tube well)
75 mm dia 4.85 mm thick tube well pipe and blank G.I. pipe 3.00 rm.
Centralizer made with 12 mm dia M.S. rod of approved design 20.00 each
500 mm dia M.S. cap of 6 mm thick for housing pipe covering. 1.00 each
20 Verticality test of the well including supplying verticality test 1.00 L.S
equipment, labour, etc. after sinking of the well but before
placement of the shrouding materials and after completion of the
well including rectification of any deviation from the specified
limit etc. all complete as per specification and direction of the
Engineer-in-Charge. (Ref: Technical Specification, Clause #
7A.5.3).
21 Making a clay seal above the filter pack with clay balls made of 1.00 L.S
50% local puddled clay (clay mixed with 3-5% puddloo) and 50%
bentonite as per specification and direction of the Engineer- in
Charge and as per attached Drawing (Up to 10m of housing
pipe).
Total (Tk)
TOTAL
DEEP TUBE WELL A
..
..
file:///conversion/tmp/scratch/365023380.xls 26 of 27
Sl.
DESCRIPTION OF ITEMS QTY. UNIT RATE (TK.) AMOUNT (TK)
No.
..
Chief Engineer
BUET, Dhaka.
SAE (C-5) SDE (C-3) XEN (C-2) SE (C-1)
file:///conversion/tmp/scratch/365023380.xls 27 of 27