Sei sulla pagina 1di 103

EMC Support Matrix

EMC SAN Copy


March 2014
P/N 300-000-166
Rev 56

Copyright EMC Corporation 2014


Copyright 2001 - 2014 EMC Corporation. All Rights Reserved.

EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without notice.

EMC, the "EMC2 where information lives" logo and (product name to which the support matrix is directed, i.e. CLARiiON) are either registered trademarks or
trademarks of EMC Corporation in the United States and other countries. For a complete listing of EMC Corporation trademarks, see the EMC Corporation
trademark list at http://www.emc.com/legal/emc-corporation-trademarks.htm.
All other trademarks used herein are the property of their respective owners.

Use, copying, and distribution of any EMC software described in this publication requires an applicable software license.

For the most up-to-date listing fo EMC product names, see EMC Corporation Trademarks on EMC.com.

All other trademarks used herein are the property of their respective owners.
EMC Support Matrix
EMC's Policies and Requirements for EMC Support Matrix.........................................................................................................................................................1
Data Mobility and Migration Software - Supported Arrays...........................................................................................................................................................2
Information Management Software Array Capabilities.................................................................................................................................................................5
Asianux AX [32-Bit]...........................................................................................................................................................................................................5
Asianux AX [AMD64].........................................................................................................................................................................................................9
Asianux AX [EM64T].......................................................................................................................................................................................................13
Asianux AX [IA64]...........................................................................................................................................................................................................16
Asianux AX [x86_64].......................................................................................................................................................................................................21
Fujitsu Ltd. Solaris...........................................................................................................................................................................................................25
Hewlett Packard HP-UX..................................................................................................................................................................................................25
IBM AIX...........................................................................................................................................................................................................................26
Microsoft Windows 2008 R2 SP1 [IA64].........................................................................................................................................................................27
Microsoft Windows 2008 R2 SP1 [x64]...........................................................................................................................................................................27
Microsoft Windows 2008 R2 [IA64].................................................................................................................................................................................28
Microsoft Windows 2008 R2 [x64]...................................................................................................................................................................................28
Microsoft Windows 2008 [IA64].......................................................................................................................................................................................29
Microsoft Windows 2008 [x64]........................................................................................................................................................................................29
Microsoft Windows 2008 [x86]........................................................................................................................................................................................30
Novell Netware................................................................................................................................................................................................................30
Oracle Linux [32-Bit]........................................................................................................................................................................................................30
Oracle Linux [x86_64].....................................................................................................................................................................................................35
Oracle Solaris..................................................................................................................................................................................................................39
Red Hat RHEL [32-Bit]....................................................................................................................................................................................................39
Red Hat RHEL [AMD-64]................................................................................................................................................................................................46
Red Hat RHEL [EM64T]..................................................................................................................................................................................................51
Red Hat RHEL [IA64]......................................................................................................................................................................................................55
Red Hat RHEL [IBM Power]............................................................................................................................................................................................62
Red Hat RHEL [x86_64]..................................................................................................................................................................................................64
SUSE SLES [32-Bit]........................................................................................................................................................................................................71
SUSE SLES [IA64]..........................................................................................................................................................................................................74
SUSE SLES [IBM Power]................................................................................................................................................................................................78
SUSE SLES [x86_64].....................................................................................................................................................................................................81
VMware ESX...................................................................................................................................................................................................................85
VMware ESXi..................................................................................................................................................................................................................86

Third Party Copy.............................................................................................................................................................................................................................88


Asianux AX [32-Bit].........................................................................................................................................................................................................88
Asianux AX [EM64T].......................................................................................................................................................................................................88
Asianux AX [IA64]...........................................................................................................................................................................................................89
Asianux AX [x86_64].......................................................................................................................................................................................................90
Hewlett Packard HP-UX..................................................................................................................................................................................................90
IBM AIX...........................................................................................................................................................................................................................91
Microsoft Windows 2008 R2 [IA64].................................................................................................................................................................................91
Microsoft Windows 2008 R2 [x64]...................................................................................................................................................................................92
Microsoft Windows 2008 [IA64].......................................................................................................................................................................................93
Microsoft Windows 2008 [x64]........................................................................................................................................................................................93
Microsoft Windows 2008 [x86]........................................................................................................................................................................................94
Oracle Solaris..................................................................................................................................................................................................................95
Red Hat RHEL [32-Bit]....................................................................................................................................................................................................95
Red Hat RHEL [IA64]......................................................................................................................................................................................................96
Red Hat RHEL [x86_64]..................................................................................................................................................................................................97
SUSE SLES [32-Bit]........................................................................................................................................................................................................97
SUSE SLES [IA64]..........................................................................................................................................................................................................98
SUSE SLES [x86_64].....................................................................................................................................................................................................99
VMware ESX...................................................................................................................................................................................................................99
VMware ESXi................................................................................................................................................................................................................101
EMC's Policies and Requirements for EMC Support Matrix
EMC's Support Matrix Policies and Requirements

This section describes EMC's policies and requirements for the EMC Support Matrix document.

Purpose and Limitations of this Document

This document is being provided for informational purposes only and may change at any time. This version supersedes and replaces all previous versions. The
information is to serve only as a guide for those configurations/products that EMC has qualified. The information in this document is a subset of the information
that can be found on the E-Lab Interoperability Navigator tool which is available for all EMC personnel, customers and partners. The E-Lab Interoperability
Navigator site may be reached at http://elabnavigator.emc.com.

The information included in this document is intended as a guide in the configuration of systems for EMC's products. It is not intended to be the sole resource
for system configuration. For more information or answers to questions not found in this document, please see EMC's website, other EMC documentation,
relevant vendor documentation, or contact your EMC Sales or EMC Customer Service representative.
For a complete listing of any known issues with the current support matrix content, please review the ESM Errata on E-Lab Interoperability Navigator. To report
any issues with the content contained within the support matrix, follow the steps documented on the Contacts link on E-Lab Interoperability Navigator. E-Lab
Interoperability Navigator can be reached at http://elabnavigator.emc.com.

Policies for Qualifying Systems

Policies and procedures for support of EMC products are set forth in the customer's applicable agreements. EMC's publication of information relating to system
configurations covers only those outlined in this document or by approval from EMC Engineering. Other system configurations not found in this document are
not qualified without EMC Engineering approval. EMC has qualified hardware and software provided only by the vendors listed in this document, and host
systems, hardware and software from other vendors are not qualified, and may never be. Please contact your EMC Sales or EMC Customer Service
representative for updates or information not included in this document.

EMC maintains a large collection of the products listed above as well as third-party application software for qualification with EMC's storage systems and to
simulate customer environments, but you must consult the vendors for information about their system internals, such as hardware and associated drivers.

Policy for Future Qualification of Operating System Software Releases

The information in this document is maintained by EMC and EMC strives to update this document with new releases of hardware, operating systems, firmware,
BIOS, switch software, etc., as they become available from the vendors. EMC works with the vendors during their development and release processes in order
to be fully informed at the time the vendors release new versions. EMC does not announce qualification prior to vendors' General Availability. In some cases,
EMC may choose to perform regression testing following the vendors' GA; in these cases and in cases where advance preparation is not possible, EMC may
validate and qualify vendors' products as appropriate after they have been released. For early support of such products, including vendor beta participation,
contact your EMC Sales or EMC Customer Service representative.

Policy for End-of-Life Support

EMC strives to continue support for any installed platforms, but may remove support from this host matrix for new installations within three months after the
vendor has announced that this platform has reached the end of life. EMC will continue support for existing installations of hardware, operating systems, and
components that the vendor has officially declared to have reached end of life as long as support is available from the vendor. For the full list of EMC product
end of life and end of support, please see the "Release and End of Life Dates" pages on the Support section of Powerlink.

03/02/2014 1 EMC's Policies and Requirements for EMC Support Matrix


Data Mobility and Migration Software - Supported Arrays
Configuration Notes

This table describes the supported remote storage devices that are supported with EMC software products such as PowerPath Migration Enabler, Open
Replicator and SAN Copy. For the complete list of the features that are supported by PPME (ORS, Invista Encapsulation, Encryption Migration, Symmclone,
HBC), please refer to the content of the release notes for PPME, and PP encryption.
Please note that SAN Copy can also be hosted on the CLARiiON storage systems listed in the Interoperable Storage Array column, copying to/from
the CLARiiON storage systems listed in the Storage Array column (Exceptions: SAN Copy does not run on CX200; SAN Copy/E is required for CX300
and AX100/150). For more details on SAN Copy interoperability between CLARiiON storage systems, please refer to the most recent version of the SAN Copy
Release Notes.
EMC SAN Copy
Information
Management
No. Storage Array Software Interoperable Storage Array
1 EMC CLARiiON CX3-10c EMC SAN Copy: EMC CLARiiON CX3-10c
03.24, 03.26
2 EMC CLARiiON CX3-40c/CX3-20c EMC SAN Copy EMC CLARiiON CX3-40c/CX3-20c
03.22
3 EMC CLARiiON CX3-80/CX3-40(F)/CX3-20(F) EMC SAN Copy EMC Symmetrix: VMAX, VMAX 20K, VMAX 40K;
03.26
NEC Symmetrix: VMAX, VMAX 20K, VMAX 40K
4 EMC CLARiiON: AX4-5, CX3-10c, CX3-40c/CX3-20c, EMC SAN Copy EMC CLARiiON CX300;
CX3-80/CX3-40(F)/CX3-20(F); 03.26 Hewlett Packard StorageWorks: EVA3000, EVA4000, EVA5000, EVA6000,
EVA8000, MSA-1000
EMC Celerra: NS80FC5, NX4 (FC)
5 EMC CLARiiON: AX4-5, CX3-10c, EMC SAN Copy EMC CLARiiON CX3-80/CX3-40(F)/CX3-20(F)
CX3-80/CX3-40(F)/CX3-20(F); 03.26
EMC Celerra: NS80FC5, NX4 (FC)
6 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c EMC SAN Copy EMC CLARiiON AX150i
03.26
7 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c EMC SAN Copy EMC Symmetrix: VMAX, VMAX 20K, VMAX 40K;
03.263
NEC Symmetrix: VMAX, VMAX 20K, VMAX 40K
8 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c EMC SAN Copy: EMC CLARiiON CX3-40c/CX3-20c
03.24, 03.26
9 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, EMC SAN Copy EMC Symmetrix: VMAX, VMAX 20K, VMAX 40K;
CX3-80/CX3-40(F)/CX3-20(F) 03.24
NEC Symmetrix: VMAX, VMAX 20K, VMAX 40K
10 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, EMC SAN Copy Hitachi HDS Thunder: 9520v, 9530v, 9570v, 9585v
CX3-80/CX3-40(F)/CX3-20(F) 03.26
11 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, EMC SAN Copy EMC: CLARiiON CX300, Symmetrix DMX-3, Symmetrix DMX-4, Symmetrix
CX3-80/CX3-40(F)/CX3-20(F); 03.24 DMX/DMX-2;
EMC Celerra NS80FC5 Hewlett Packard StorageWorks: EVA3000, EVA4000, EVA5000, EVA6000,
EVA8000, MSA-1000;
NEC Symmetrix DMX-4
12 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, EMC SAN Copy Hitachi HDS TagmaStore: AMS1000, AMS200, AMS500, WMS100;
CX3-80/CX3-40(F)/CX3-20(F); 03.26
IBM DS 4800
EMC Celerra NS80FC5
13 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, EMC SAN Copy: Hewlett Packard StorageWorks: EMA12000, EMA16000, ESA12000, HSG80,
CX3-80/CX3-40(F)/CX3-20(F); 03.24, 03.26 MA8000, RA8000, XP-1024, XP-12000, XP-128, XP-512;
EMC Celerra NS80FC5 Hewlett Packard SureStore XP-256;
Hitachi HDS: 9910, 9920, 9960, 9970V, 9980V, 9990;
IBM DS: 4100, 4300, 4400, 4500, 8100, 8300;
IBM ESS: 800, E20, F20;
IBM FastT: 500, 600, 700, 900;
Sun StorEdge: 9990, T3, T3+
14 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c; EMC SAN Copy EMC Symmetrix: DMX-3, DMX-4, DMX/DMX-2;
03.263
EMC Celerra NS20FC4 NEC Symmetrix DMX-4
15 EMC CLARiiON: CX3-10c, CX3-80/CX3-40(F)/CX3-20(F) EMC SAN Copy: EMC CLARiiON AX150
03.22, 03.24,
03.26
16 EMC CLARiiON: CX3-10c, CX3-80/CX3-40(F)/CX3-20(F); EMC SAN Copy EMC CLARiiON CX3-80/CX3-40(F)/CX3-20(F)
03.24
EMC Celerra NS80FC5
17 EMC CLARiiON: CX3-40c/CX3-20c, EMC SAN Copy EMC: CLARiiON CX300, Symmetrix DMX-3, Symmetrix DMX-4, Symmetrix
CX3-80/CX3-40(F)/CX3-20(F); 03.22 DMX/DMX-2;
EMC Celerra NS80FC5 Hewlett Packard StorageWorks: EMA12000, EMA16000, ESA12000, EVA3000,
EVA4000, EVA5000, EVA6000, EVA8000, HSG80, MA8000, MSA-1000, RA8000,
XP-1024, XP-12000, XP-128, XP-512;
Hewlett Packard SureStore XP-256;
Hitachi HDS: 9920, 9960, 9970V, 9980V, 9990;
IBM DS: 4100, 4300, 4400, 4500, 8100, 8300;
IBM ESS: 800, E20, F20;
IBM FastT: 500, 600, 700, 900;
NEC Symmetrix DMX-4;
Sun StorEdge: 9990, T3, T3+

03/02/2014 2 Data Mobility and Migration Software - Supported Arrays


Data Mobility and Migration Software - Supported Arrays
18 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, EMC SAN Copy Pillar Axiom: 300, 500;
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; 04.30
Sun StorageTek 6540
EMC Celerra: NS-120, NS-480, NS-9601, 2
19 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, EMC SAN Copy: 3PAR InServ: E200, S400, S800;
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; 04.28, 04.29,
04.30 EMC CLARiiON: AX150, AX150i, AX4-5, CX3-10c, CX3-40c/CX3-20c,
EMC Celerra: NS-120, NS-480, NS-9601, 2 CX3-80/CX3-40(F)/CX3-20(F), CX300;
EMC: Celerra NX4 (FC), Symmetrix DMX-3, Symmetrix DMX-4, Symmetrix
DMX/DMX-2, Symmetrix VMAX, Symmetrix VMAX 20K, Symmetrix VMAX 40K;
Hewlett Packard StorageWorks: EMA12000, EMA16000, ESA12000, EVA3000,
EVA4000, EVA4100, EVA5000, EVA6000, EVA6100, EVA8000, EVA8100, HSG80,
MA8000, MSA-1000, MSA1500, RA8000, XP-10000, XP-1024, XP-12000, XP-128,
XP-20000, XP-24000, XP-512;
Hewlett Packard SureStore XP-256;
Hitachi HDS: 9910, 9920, 9960, 9970V, 9980V, 9990, TagmaStore AMS1000,
TagmaStore AMS200, TagmaStore AMS500, TagmaStore NSC55, TagmaStore
USP100, TagmaStore USP1100, TagmaStore USP600, TagmaStore WMS100,
Thunder 9520v, Thunder 9530v, Thunder 9570v, Thunder 9585v;
IBM DS: 3400, 4100, 4300, 4400, 4500, 4800, 6800, 8100, 8300;
IBM ESS: 800, E20, F20;
IBM FastT: 500, 600, 700, 900;
NEC Symmetrix: DMX-4, VMAX, VMAX 20K, VMAX 40K;
Sun StorEdge: 9990, T3, T3+
20 EMC Unified Storage VNX5100/5300/5500/5700/7500 EMC SAN Copy Dell Compellent Series: 306, 406;
(Block) 05.32
Hewlett Packard XP P9500;
Hitachi HDS VSP;
IBM: Storwize v7000, XIV;
Sun Flexline FLX280
21 EMC Unified Storage VNX5100/5300/5500/5700/7500 EMC SAN Copy: 3PAR InServ: E200, S400, S800;
(Block) 05.31, 05.32
EMC CLARiiON: AX150, AX150i, AX4-5, CX3-10c, CX3-40c/CX3-20c,
CX3-80/CX3-40(F)/CX3-20(F), CX300;
EMC: Celerra NX4 (FC), Symmetrix DMX-3, Symmetrix DMX-4, Symmetrix
DMX/DMX-2, Symmetrix VMAX, Symmetrix VMAX 20K, Symmetrix VMAX 40K,
Symmetrix VMAXe, Unified Storage VNX5100/5300/5500/5700/7500 (Block);
Hewlett Packard StorageWorks: EMA12000, EMA16000, ESA12000, EVA3000,
EVA4000, EVA4100, EVA5000, EVA6000, EVA6100, EVA8000, EVA8100, HSG80,
MA8000, MSA-1000, MSA1500, RA8000, XP-10000, XP-1024, XP-12000, XP-128,
XP-20000, XP-24000, XP-512;
Hewlett Packard SureStore XP-256;
Hitachi HDS: 9910, 9920, 9960, 9970V, 9980V, 9990, TagmaStore AMS1000,
TagmaStore AMS200, TagmaStore AMS500, TagmaStore NSC55, TagmaStore
USP100, TagmaStore USP1100, TagmaStore USP600, TagmaStore WMS100,
Thunder 9520v, Thunder 9530v, Thunder 9570v, Thunder 9585v;
IBM DS: 3400, 4100, 4300, 4400, 4500, 4800, 6800, 8100, 8300;
IBM ESS: 800, E20, F20;
IBM FastT: 500, 600, 700, 900;
NEC Symmetrix: DMX-4, VMAX, VMAX 20K, VMAX 40K;
Pillar Axiom: 300, 500;
Sun StorEdge: 9990, T3, T3+;
Sun StorageTek 6540
22 EMC Unified Storage: VNX5100/5300/5500/5700/7500 EMC SAN Copy 3PAR InServ: E200, S400, S800;
(Block), VNX5200/5400/5600/5800/7600/8000(Block) 05.33
Dell Compellent Series: 306, 406;
EMC CLARiiON: AX150, AX150i, AX4-5, CX3-10c, CX3-40c/CX3-20c,
CX3-80/CX3-40(F)/CX3-20(F), CX300;
EMC: Celerra NX4 (FC), Symmetrix DMX-3, Symmetrix DMX-4, Symmetrix
DMX/DMX-2, Symmetrix VMAX, Symmetrix VMAX 20K, Symmetrix VMAX 40K,
Symmetrix VMAXe, Unified Storage VNX5100/5300/5500/5700/7500 (Block),
Unified Storage VNX5200/5400/5600/5800/7600/8000(Block);
Hewlett Packard StorageWorks: EMA12000, EMA16000, ESA12000, EVA3000,
EVA4000, EVA4100, EVA5000, EVA6000, EVA6100, EVA8000, EVA8100, HSG80,
MA8000, MSA-1000, MSA1500, RA8000, XP-10000, XP-1024, XP-12000, XP-128,
XP-20000, XP-24000, XP-512;
Hewlett Packard: SureStore XP-256, XP P9500;
Hitachi HDS: 9910, 9920, 9960, 9970V, 9980V, 9990, TagmaStore AMS1000,
TagmaStore AMS200, TagmaStore AMS500, TagmaStore NSC55, TagmaStore
USP100, TagmaStore USP1100, TagmaStore USP600, TagmaStore WMS100,
Thunder 9520v, Thunder 9530v, Thunder 9570v, Thunder 9585v, VSP;
IBM DS: 3400, 4100, 4300, 4400, 4500, 4800, 6800, 8100, 8300;
IBM ESS: 800, E20, F20;
IBM FastT: 500, 600, 700, 900;
IBM: Storwize v7000, XIV;
NEC Symmetrix: DMX-4, VMAX, VMAX 20K, VMAX 40K;
Pillar Axiom: 300, 500;
Sun: Flexline FLX280, StorEdge 9990, StorEdge T3, StorEdge T3+, StorageTek
6540

03/02/2014 3 Data Mobility and Migration Software - Supported Arrays


Data Mobility and Migration Software - Supported Arrays
23 EMC: CLARiiON AX4-5, Celerra NX4 (FC) EMC SAN Copy EMC CLARiiON AX150
02.23
24 EMC: CLARiiON AX4-5, Celerra NX4 (FC) EMC SAN Copy Hewlett Packard StorageWorks: EVA8100, MSA1500;
03.26
IBM DS 3400
25 EMC: CLARiiON CX3-80/CX3-40(F)/CX3-20(F), Celerra EMC SAN Copy EMC CLARiiON CX3-80/CX3-40(F)/CX3-20(F)
NS80FC5 03.22
26 EMC: CLARiiON CX3-80/CX3-40(F)/CX3-20(F), Celerra EMC SAN Copy EMC Symmetrix: DMX-3, DMX-4, DMX/DMX-2;
NS80FC5 03.26
NEC Symmetrix DMX-4
1. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
2. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
3. This SAN Copy software version also supports iSCSI only on the listed arrays
4. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
5. NS80FC has equivalent array attributes to CX3-80
6. EMC support 32bit software in these type arrays only.

03/02/2014 4 Data Mobility and Migration Software - Supported Arrays


Information Management Software Array Capabilities
Configuration Notes

Describes the support statements for Information Management Software with Operating Systems, HBAs, and Storage Arrays.
Asianux AX [32-Bit]
Asianux AX [32-Bit]
Information
Operating Management
No. Storage Array System Host Bus Adapter Software Comments
1 Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
[32-Bit] 1.0 LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 02.26
SP1 LP9802DC-E, LP982-E;
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP, QLE2360-E-SP, QLE2362-E-SP
2 Asianux AX Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E EMC SAN
[32-Bit] 1.0: Copy 02.26
GA, SP1,
SP2, SP3;
Asianux AX
[32-Bit] 2.0:
SP1, SP2;
Asianux AX
[32-Bit]: 3.0,
3.0 SP1
3 Asianux AX EMC SAN See3
[32-Bit] 1.0: Copy 02.26
GA, SP2,
SP3;
Asianux AX
[32-Bit] 2.0:
SP1, SP2;
Asianux AX
[32-Bit]: 3.0,
3.0 SP1
4 Asianux AX EMC SAN
[32-Bit] 1.0: Copy: 02.23,
GA, SP2, 03.26
SP3;
Asianux AX
[32-Bit] 2.0:
SP1, SP2;
Asianux AX
[32-Bit]: 3.0,
3.0 SP1
5 Asianux AX EMC: 250-048-900, Integrated; EMC SAN
[32-Bit] 1.0: Copy 02.26
GA, SP2, Fujitsu Ltd.: PW008FC2, PW008FC3;
SP3;
Hewlett Packard: A6795A, A6826A, A9782A12, 13, 14,
Asianux AX 15, 16, 17, 18, A9784A12, 13, 14, 15, 16, 17, 18, AB232A
[32-Bit] 2.0: (LP9802), AB378A, AB379A (QLA2462), AB465A8, 9;
SP1, SP2;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
Asianux AX (QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
[32-Bit]: 3.0, 6239;
3.0 SP1
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
6 Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
[32-Bit] 1.0: LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.264
GA, SP2, LP9802-E, LP9802DC-E, LP982-E;
SP3;
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
Asianux AX QLA2342-E-SP
[32-Bit] 2.0:
SP1, SP2;
Asianux AX
[32-Bit]: 3.0,
3.0 SP1
7 Asianux AX Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
[32-Bit] 1.0: LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 02.264
GA, SP2, LPe11002-E-G, LPe1150-E, LPe1150-E-G;
SP3;
QLogic: QLA2200F-EMC, QLA2460-E-SP,
Asianux AX QLA2462-E-SP, QLE2360-E-SP, QLE2362-E-SP,
[32-Bit] 2.0: QLE2460-E-SP, QLE2462-E-SP
SP1, SP2;
Asianux AX
[32-Bit]: 3.0,
3.0 SP1
8 Asianux AX Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See3
[32-Bit] 1.0: (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 02.26
GA, SP2, (LP8000), Dual-port Fibre Channel Adapter for HP
SP3; Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
Asianux AX 381881-B21, Dual-port Fibre Channel Adapter for HP
[32-Bit] 2.0: Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
SP1, SP2; FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
Asianux AX (LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
[32-Bit]: 3.0, FCA2404 (LP9802), FCA2404DC (LP9802DC),
3.0 SP1 FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;

03/02/2014 5 Information Management Software Array Capabilities


Information Management Software Array Capabilities

IBM: 24P0960 (QLA2340), HS20 FC Exp Card


(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F)
9 Asianux AX EMC SAN
[32-Bit]: 1.0 Copy 02.26
SP1, 2.0 GA
10 EMC CLARiiON CX300 Asianux AX EMC SAN
[32-Bit] 1.0 Copy 02.23
GA
11 EMC CLARiiON: AX4-5, CX3-10c, CX3-40c/CX3-20c, Asianux AX EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300; [32-Bit] 1.0: Copy 02.26
SP2, SP3;
EMC Celerra NX4 (FC)
Asianux AX
[32-Bit] 2.0:
SP1, SP2;
Asianux AX
[32-Bit]: 3.0,
3.0 SP1
12 EMC CLARiiON: AX4-5, CX300; Asianux AX EMC SAN
[32-Bit] 1.0 Copy 02.26
EMC Celerra NX4 (FC) GA
13 EMC CLARiiON: AX4-5, CX300; Asianux AX EMC SAN
[32-Bit] 1.0: Copy 03.26
EMC Celerra NX4 (FC) GA, SP2,
SP3;
Asianux AX
[32-Bit] 2.0:
SP1, SP2;
Asianux AX
[32-Bit]: 3.0,
3.0 SP1
14 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [32-Bit] 1.0: Copy 03.26
SP2, SP3; Hewlett Packard: A6795A, A6826A, A9782A12, 13, 14,
15, 16, 17, 18, A9784A12, 13, 14, 15, 16, 17, 18, AB378A,
Asianux AX AB379A (QLA2462), AB465A8, 9;
[32-Bit] 2.0:
SP1, SP2; IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
Asianux AX 6239;
[32-Bit]: 3.0,
3.0 SP1 QLogic QLA2200F-EMC
15 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [32-Bit] 1.0: LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 03.264
SP2, SP3; LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Asianux AX QLogic: QLA2460-E-SP, QLA2462-E-SP,
[32-Bit] 2.0: QLA4050C-E-SP, QLA4052C-E-SP, QLE2360-E-SP,
SP1, SP2; QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
QLE4060C-E-SP, QLE4062C-E-SP
Asianux AX
[32-Bit]: 3.0,
3.0 SP1
16 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300 [32-Bit] 1.0: Copy 02.23
SP2, SP3;
Asianux AX
[32-Bit] 2.0:
SP1, SP2;
Asianux AX
[32-Bit]: 3.0,
3.0 SP1
17 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP10000ExDC-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [32-Bit] 1.0 LP1050-E, LP1050DC-E, LP1050Ex-E, LP9002-E Copy 03.26
SP1 (LP9002L-E), LP9002C-E, LP9802-E, LP9802DC-E,
EMC Celerra: NS20FC19, NS80FC20 LP982-E;
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP, QLE2360-E-SP, QLE2362-E-SP
18 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [32-Bit]: 1.0 Copy 03.26
SP1, 2.0 GA
EMC Celerra: NS20FC19, NS80FC20
19 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c5, Asianux AX EMC SAN See3
CX3-80/CX3-40(F)/CX3-20(F)5 [32-Bit] 1.0: Copy 03.26
SP2, SP3;
Asianux AX
[32-Bit] 2.0:
SP1, SP2;
Asianux AX
[32-Bit]: 3.0,
3.0 SP1
20 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c5, Asianux AX EMC: 250-048-900, Integrated; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F)5 [32-Bit] 1.0: Copy 03.26
SP2, SP3; Hewlett Packard AB232A (LP9802);
NEC: NT2010A-A001 (QLA2340), NTAB232A
Asianux AX (LP9802);
[32-Bit] 2.0:
SP1, SP2; Unisys FCH742313-P64 (LP9802)
Asianux AX
[32-Bit]: 3.0,
3.0 SP1

03/02/2014 6 Information Management Software Array Capabilities


Information Management Software Array Capabilities
21 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c5, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
CX3-80/CX3-40(F)/CX3-20(F)5 [32-Bit] 1.0: LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 03.264
SP2, SP3; LP9802-E, LP9802DC-E, LP982-E;
Asianux AX QLogic: QLA2340-E-SP, QLA2342-E-SP
[32-Bit] 2.0:
SP1, SP2;
Asianux AX
[32-Bit]: 3.0,
3.0 SP1
22 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c5, Asianux AX Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See3
CX3-80/CX3-40(F)/CX3-20(F)5 [32-Bit] 1.0: (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 03.26
SP2, SP3; (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Asianux AX Channel Adapter for HP Proliant BL25p/BL45p
[32-Bit] 2.0: 381881-B21, Dual-port Fibre Channel Adapter for HP
SP1, SP2; Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
Asianux AX FCA2214DC/321835-B21 (QLA2342), FCA2354
[32-Bit]: 3.0, (LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
3.0 SP1 FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic QLA2310F-E-SP
23 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [32-Bit] 1.0 LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X1, 2; SP1 LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9606, 7 QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
24 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [32-Bit] 1.0: Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X1, 2; SP1, SP2, QLogic: QLE2360-E-SP, QLE2362-E-SP
SP3;
EMC Celerra: NS-120, NS-480, NS-9606, 7
Asianux AX
[32-Bit] 2.0:
SP1, SP2;
Asianux AX
[32-Bit]: 3.0,
3.0 SP1
25 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC SAN See3
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [32-Bit] 1.0: Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X1, 2; SP2, SP3;
EMC Celerra: NS-120, NS-480, NS-9606, 7 Asianux AX
[32-Bit] 2.0:
SP1, SP2;
Asianux AX
[32-Bit]: 3.0,
3.0 SP1
26 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [32-Bit] 1.0: Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X1, 2; SP2, SP3; Emulex: LP11000-E, LP11002-E, LP1150-E,
LPe11000-E, LPe11000-E-G, LPe11002-E,
EMC Celerra: NS-120, NS-480, NS-9606, 7 Asianux AX LPe11002-E-G, LPe1150-E, LPe1150-E-G;
[32-Bit] 2.0:
SP1, SP2; Fujitsu Ltd.: PW008FC2, PW008FC3;
Asianux AX Generic Vendor NIC: 10/100, GbE;
[32-Bit]: 3.0,
3.0 SP1 Hewlett Packard: A6795A, A6826A, A9782A12, 13, 14,
15, 16, 17, 18, A9784A12, 13, 14, 15, 16, 17, 18, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A8, 9;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLA4010-E-SP, QLA4010C-E-SP,
QLA4050-E-SP, QLA4050C-E-SP10, 11,
QLA4052C-E-SP10, 11, QLE2460-E-SP,
QLE2462-E-SP, QLE4060C-E-SP, QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
27 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [32-Bit] 1.0: LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X1, 2; SP2, SP3; LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9606, 7 Asianux AX Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
[32-Bit] 2.0: (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
SP1, SP2; (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Asianux AX Channel Adapter for HP Proliant BL25p/BL45p
[32-Bit]: 3.0, 381881-B21, Dual-port Fibre Channel Adapter for HP
3.0 SP1 Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);

03/02/2014 7 Information Management Software Array Capabilities


Information Management Software Array Capabilities

QLogic: QLA2310F-E-SP, QLA2340-E-SP,


QLA2342-E-SP
28 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [32-Bit]: 1.0 Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X1, 2; SP1, 2.0 GA
EMC Celerra: NS-120, NS-480, NS-9606, 7
29 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [32-Bit] 1.0 LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.28
SP1 LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9606, 7
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
30 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [32-Bit] 1.0: Copy 04.28
SP1, SP2, QLogic: QLE2360-E-SP, QLE2362-E-SP
EMC Celerra: NS-120, NS-480, NS-9606, 7 SP3;
Asianux AX
[32-Bit] 2.0:
SP1, SP2;
Asianux AX
[32-Bit]: 3.0,
3.0 SP1
31 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC SAN See3
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [32-Bit] 1.0: Copy 04.28
SP2, SP3;
EMC Celerra: NS-120, NS-480, NS-9606, 7
Asianux AX
[32-Bit] 2.0:
SP1, SP2;
Asianux AX
[32-Bit]: 3.0,
3.0 SP1
32 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [32-Bit] 1.0: Copy 04.28
SP2, SP3; Emulex: LP11000-E, LP11002-E, LP1150-E,
EMC Celerra: NS-120, NS-480, NS-9606, 7 LPe11000-E, LPe11000-E-G, LPe11002-E,
Asianux AX LPe11002-E-G, LPe1150-E, LPe1150-E-G;
[32-Bit] 2.0:
SP1, SP2; Fujitsu Ltd.: PW008FC2, PW008FC3;
Asianux AX Generic Vendor NIC: 10/100, GbE;
[32-Bit]: 3.0,
3.0 SP1 Hewlett Packard: A6795A, A6826A, A9782A12, 13, 14,
15, 16, 17, 18, A9784A12, 13, 14, 15, 16, 17, 18, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A8, 9;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLA4010-E-SP, QLA4010C-E-SP,
QLA4050-E-SP, QLA4050C-E-SP10, 11,
QLA4052C-E-SP10, 11, QLE2460-E-SP,
QLE2462-E-SP, QLE4060C-E-SP, QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
33 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [32-Bit] 1.0: LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.28
SP2, SP3; LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9606, 7
Asianux AX Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
[32-Bit] 2.0: (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
SP1, SP2; (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Asianux AX Channel Adapter for HP Proliant BL25p/BL45p
[32-Bit]: 3.0, 381881-B21, Dual-port Fibre Channel Adapter for HP
3.0 SP1 Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
34 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [32-Bit]: 1.0 Copy 04.28
SP1, 2.0 GA
EMC Celerra: NS-120, NS-480, NS-9606, 7
35 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
[32-Bit] 1.0 LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 02.23
SP1 LP9802DC-E, LP982-E;
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
36 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
[32-Bit] 1.0: Copy 02.23
GA, SP1, QLogic: QLE2360-E-SP, QLE2362-E-SP
SP2, SP3;
Asianux AX
[32-Bit] 2.0:
SP1, SP2;
Asianux AX
[32-Bit]: 3.0,

03/02/2014 8 Information Management Software Array Capabilities


Information Management Software Array Capabilities

3.0 SP1
37 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX EMC SAN See3
[32-Bit] 1.0: Copy 02.23
GA, SP2,
SP3;
Asianux AX
[32-Bit] 2.0:
SP1, SP2;
Asianux AX
[32-Bit]: 3.0,
3.0 SP1
38 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX EMC: 250-048-900, Integrated; EMC SAN
[32-Bit] 1.0: Copy 02.23
GA, SP2, Emulex: LP11000-E, LP11002-E, LP1150-E,
SP3; LPe11000-E, LPe11000-E-G, LPe11002-E,
LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Asianux AX
[32-Bit] 2.0: Hewlett Packard: A6795A, A6826A, A9782A12, 13, 14,
SP1, SP2; 15, 16, 17, 18, A9784A12, 13, 14, 15, 16, 17, 18, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A8, 9;
Asianux AX
[32-Bit]: 3.0, IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
3.0 SP1 (QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLA4050C-E-SP, QLA4052C-E-SP,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
39 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
[32-Bit] 1.0: LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.23
GA, SP2, LP9802-E, LP9802DC-E, LP982-E;
SP3;
Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
Asianux AX (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
[32-Bit] 2.0: (LP8000), Dual-port Fibre Channel Adapter for HP
SP1, SP2; Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
Asianux AX 381881-B21, Dual-port Fibre Channel Adapter for HP
[32-Bit]: 3.0, Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
3.0 SP1 FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
40 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX EMC SAN
[32-Bit]: 1.0 Copy 02.23
SP1, 2.0 GA
1. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
2. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.
3. Windows 2000 hosts running less than SP4 could be susceptible to data loss during LUN expansion operations. This issue is corrected by Microsoft in SP4, or by applying hotfix
327020. See EMC Solution IS emc73538 and Microsoft Knowledge Base article 327020 for more information.
4. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
5. CLARiiON CX3-40c/CX3-20c requires minimum revision 03.22.xxx.5.50x.
6. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
7. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
8. The AB465A 2port/2Gig fibre channel/GigE combo card only qualified fibre channel port at this time.
9. The AB465A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
10. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator.
11. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator. Refer to the EMC Host Connectivity guide for additional information on Windows iSCSI components and the Microsoft iSCSI Software Initiator usage.
12. FC-AL, FC-SW topologies can co-exist on the same server but not on same HBA, provided that different topologies are attached to different HBAs; with the exception of the dual port
A6826A with one port FC-AL and the other port FC-SW.
13. Auto-sensing capability on the HBA is permanently enabled. There is no option to disable auto-sensing on the HBA.
14. The A9782A/A9784A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
15. The A9782A/A9784A fibre channel/GigE combo card only port qualified is fibre channel at this time.
16. The A9782A/A9784A HBA is capable of supporting both 1 and 2 Gb speeds.
17. The A9782A/A9784A the adapter operates in PCI 33 Mhz/66 Mhz and PCI-X 66 Mhz/100Mhz/133Mhz bus speeds with a 64-bit bus width
18. A6826A/A9784A/A9782A hbas: host must be configured as a 64Bit operating system.
19. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
20. NS80FC has equivalent array attributes to CX3-80

Asianux AX [AMD64]

03/02/2014 9 Information Management Software Array Capabilities


Information Management Software Array Capabilities

Asianux AX [AMD64]
Information
Operating Management
No. Storage Array System Host Bus Adapter Software Comments
1 Asianux AX EMC SAN See2
[AMD64] Copy 02.26
1.0: SP2,
SP3
2 Asianux AX EMC SAN
[AMD64] Copy: 02.23,
1.0: SP2, 03.26
SP3
3 Asianux AX EMC: 250-048-900, Integrated; EMC SAN
[AMD64] Copy 02.26
1.0: SP2, Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E;
SP3
Fujitsu Ltd.: PW008FC2, PW008FC3;
Hewlett Packard: A6795A, A6826A, A9782A8, 9, 10, 11,
12, 13, 14,
A9784A8, 9, 10, 11, 12, 13, 14, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A15, 16;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A (LP9802);
Unisys FCH742313-P64 (LP9802)
4 Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See2
[AMD64] LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.261
1.0: SP2, LP9802-E, LP9802DC-E, LP982-E;
SP3
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
5 Asianux AX Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
[AMD64] LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 02.261
1.0: SP2, LPe11002-E-G, LPe1150-E, LPe1150-E-G;
SP3
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLE2360-E-SP, QLE2362-E-SP,
QLE2460-E-SP, QLE2462-E-SP
6 Asianux AX Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See2
[AMD64] (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 02.26
1.0: SP2, (LP8000), Dual-port Fibre Channel Adapter for HP
SP3 Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F)
7 EMC CLARiiON: AX4-5, CX3-10c, CX3-40c/CX3-20c, Asianux AX EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300; [AMD64] Copy 02.26
1.0: SP2,
EMC Celerra NX4 (FC) SP3
8 EMC CLARiiON: AX4-5, CX300; Asianux AX EMC SAN
[AMD64] Copy 03.26
EMC Celerra NX4 (FC) 1.0: SP2,
SP3
9 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [AMD64] Copy 03.26
1.0: SP2, Hewlett Packard: A6795A, A6826A, A9782A8, 9, 10, 11,
SP3 12, 13, 14, A9784A8, 9, 10, 11, 12, 13, 14, AB378A, AB379A
(QLA2462), AB465A15, 16;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
QLogic QLA2200F-EMC
10 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [AMD64] LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 03.261
1.0: SP2, LPe11002-E-G, LPe1150-E, LPe1150-E-G;
SP3
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP, QLE2360-E-SP,
QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
QLE4060C-E-SP, QLE4062C-E-SP
11 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300 [AMD64] Copy 02.23
1.0: SP2,
SP3
12 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c7, Asianux AX EMC SAN See2
CX3-80/CX3-40(F)/CX3-20(F)7 [AMD64] Copy 03.26
1.0: SP2,
SP3
13 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c7, Asianux AX EMC: 250-048-900, Integrated; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F)7 [AMD64] Copy 03.26
1.0: SP2, Hewlett Packard AB232A (LP9802);
SP3 NEC: NT2010A-A001 (QLA2340), NTAB232A (LP9802);
Unisys FCH742313-P64 (LP9802)

03/02/2014 10 Information Management Software Array Capabilities


Information Management Software Array Capabilities
14 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c7, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See2
CX3-80/CX3-40(F)/CX3-20(F)7 [AMD64] LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 03.261
1.0: SP2, LP9802-E, LP9802DC-E, LP982-E;
SP3
QLogic: QLA2340-E-SP, QLA2342-E-SP
15 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c7, Asianux AX Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See2
CX3-80/CX3-40(F)/CX3-20(F)7 [AMD64] (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 03.26
1.0: SP2, (LP8000), Dual-port Fibre Channel Adapter for HP
SP3 Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic QLA2310F-E-SP
16 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC SAN See2
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [AMD64] Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X3, 4; 1.0: SP2,
SP3
EMC Celerra: NS-120, NS-480, NS-9605, 6
17 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [AMD64] Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X3, 4; 1.0: SP2, Emulex: LP10000ExDC-E, LP1050Ex-E, LP11000-E,
SP3 LP11002-E, LP1150-E, LP9002C-E, LPe11000-E,
EMC Celerra: NS-120, NS-480, NS-9605, 6 LPe11000-E-G, LPe11002-E, LPe11002-E-G,
LPe1150-E, LPe1150-E-G;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A6826A, A9782A8, 9, 10, 11,
12, 13, 14,
A9784A8, 9, 10, 11, 12, 13, 14, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A15, 16;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A (LP9802);
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLA4010-E-SP, QLA4010C-E-SP,
QLA4050-E-SP, QLA4050C-E-SP17, 18,
QLA4052C-E-SP17, 18, QLE2360-E-SP,
QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
QLE4060C-E-SP, QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
18 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See2
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [AMD64] LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X3, 4; 1.0: SP2, LP9802-E, LP9802DC-E, LP982-E;
SP3
EMC Celerra: NS-120, NS-480, NS-9605, 6 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
19 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC SAN See2
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [AMD64] Copy 04.28
1.0: SP2,
EMC Celerra: NS-120, NS-480, NS-9605, 6 SP3
20 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [AMD64] Copy 04.28
1.0: SP2, Emulex: LP10000ExDC-E, LP1050Ex-E, LP11000-E,
EMC Celerra: NS-120, NS-480, NS-9605, 6 SP3 LP11002-E, LP1150-E, LP9002C-E, LPe11000-E,
LPe11000-E-G, LPe11002-E, LPe11002-E-G,
LPe1150-E, LPe1150-E-G;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A6826A, A9782A8, 9, 10, 11,
12, 13, 14,
A9784A8, 9, 10, 11, 12, 13, 14, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A15, 16;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A (LP9802);
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLA4010-E-SP, QLA4010C-E-SP,

03/02/2014 11 Information Management Software Array Capabilities


Information Management Software Array Capabilities

QLA4050-E-SP, QLA4050C-E-SP17, 18,


QLA4052C-E-SP17, 18, QLE2360-E-SP,
QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
QLE4060C-E-SP, QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
21 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See2
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [AMD64] LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.28
1.0: SP2, LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9605, 6 SP3
Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
22 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX EMC SAN See2
[AMD64] Copy 02.23
1.0: SP2,
SP3
23 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX EMC: 250-048-900, Integrated; EMC SAN
[AMD64] Copy 02.23
1.0: SP2, Emulex: LP10000ExDC-E, LP1050Ex-E, LP11000-E,
SP3 LP11002-E, LP1150-E, LP9002C-E, LPe11000-E,
LPe11000-E-G, LPe11002-E, LPe11002-E-G,
LPe1150-E, LPe1150-E-G;
Hewlett Packard: A6795A, A6826A, A9782A8, 9, 10, 11,
12, 13, 14,
A9784A8, 9, 10, 11, 12, 13, 14, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A15, 16;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A (LP9802);
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLA4050C-E-SP, QLA4052C-E-SP,
QLE2360-E-SP, QLE2362-E-SP, QLE2460-E-SP,
QLE2462-E-SP, QLE4060C-E-SP, QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
24 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See2
[AMD64] LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.23
1.0: SP2, LP9802-E, LP9802DC-E, LP982-E;
SP3
Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
1. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
2. Windows 2000 hosts running less than SP4 could be susceptible to data loss during LUN expansion operations. This issue is corrected by Microsoft in SP4, or by applying hotfix
327020. See EMC Solution IS emc73538 and Microsoft Knowledge Base article 327020 for more information.
3. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
4. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.
5. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
6. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
7. CLARiiON CX3-40c/CX3-20c requires minimum revision 03.22.xxx.5.50x.
8. FC-AL, FC-SW topologies can co-exist on the same server but not on same HBA, provided that different topologies are attached to different HBAs; with the exception of the dual port
A6826A with one port FC-AL and the other port FC-SW.
9. Auto-sensing capability on the HBA is permanently enabled. There is no option to disable auto-sensing on the HBA.
10. The A9782A/A9784A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
11. The A9782A/A9784A fibre channel/GigE combo card only port qualified is fibre channel at this time.
12. The A9782A/A9784A HBA is capable of supporting both 1 and 2 Gb speeds.
13. The A9782A/A9784A the adapter operates in PCI 33 Mhz/66 Mhz and PCI-X 66 Mhz/100Mhz/133Mhz bus speeds with a 64-bit bus width
14. A6826A/A9784A/A9782A hbas: host must be configured as a 64Bit operating system.

03/02/2014 12 Information Management Software Array Capabilities


Information Management Software Array Capabilities
15. The AB465A 2port/2Gig fibre channel/GigE combo card only qualified fibre channel port at this time.
16. The AB465A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
17. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator.
18. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator. Refer to the EMC Host Connectivity guide for additional information on Windows iSCSI components and the Microsoft iSCSI Software Initiator usage.

Asianux AX [EM64T]
Asianux AX [EM64T]
Information
Operating Management
No. Storage Array System Host Bus Adapter Software Comments
1 Asianux AX EMC SAN
[EM64T] 1.0 Copy 02.26
GA
2 Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
[EM64T] 1.0 LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 02.26
GA LP9802DC-E, LP982-E;
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP, QLE2360-E-SP, QLE2362-E-SP
3 Asianux AX Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E EMC SAN
[EM64T] Copy 02.26
1.0: GA,
SP2, SP3
4 Asianux AX EMC SAN See7
[EM64T] Copy 02.26
1.0: SP2,
SP3
5 Asianux AX EMC SAN
[EM64T] Copy: 02.23,
1.0: SP2, 03.26
SP3
6 Asianux AX EMC: 250-048-900, Integrated; EMC SAN
[EM64T] Copy 02.26
1.0: SP2, Fujitsu Ltd.: PW008FC2, PW008FC3;
SP3
Hewlett Packard: A6795A, A6826A, A9782A8, 9, 10, 11,
12, 13, 14,
A9784A8, 9, 10, 11, 12, 13, 14, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A15, 16;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A (LP9802);
Unisys FCH742313-P64 (LP9802)
7 Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See7
[EM64T] LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.264
1.0: SP2, LP9802-E, LP9802DC-E, LP982-E;
SP3
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
8 Asianux AX Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
[EM64T] LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 02.264
1.0: SP2, LPe11002-E-G, LPe1150-E, LPe1150-E-G;
SP3
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLE2360-E-SP, QLE2362-E-SP,
QLE2460-E-SP, QLE2462-E-SP
9 Asianux AX Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See7
[EM64T] (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 02.26
1.0: SP2, (LP8000), Dual-port Fibre Channel Adapter for HP
SP3 Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F)
10 EMC CLARiiON: AX4-5, CX3-10c, CX3-40c/CX3-20c, Asianux AX EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300; [EM64T] Copy 02.26
1.0: SP2,
EMC Celerra NX4 (FC) SP3
11 EMC CLARiiON: AX4-5, CX300; Asianux AX EMC SAN
[EM64T] Copy 03.26
EMC Celerra NX4 (FC) 1.0: SP2,
SP3
12 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [EM64T] Copy 03.26
1.0: SP2, Hewlett Packard: A6795A, A6826A, A9782A8, 9, 10, 11,
SP3 12, 13, 14, A9784A8, 9, 10, 11, 12, 13, 14, AB378A, AB379A
(QLA2462), AB465A15, 16;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
QLogic QLA2200F-EMC

03/02/2014 13 Information Management Software Array Capabilities


Information Management Software Array Capabilities
13 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [EM64T] LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 03.264
1.0: SP2, LPe11002-E-G, LPe1150-E, LPe1150-E-G;
SP3
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP, QLE2360-E-SP,
QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
QLE4060C-E-SP, QLE4062C-E-SP
14 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300 [EM64T] Copy 02.23
1.0: SP2,
SP3
15 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [EM64T] 1.0 Copy 03.26
GA
EMC Celerra: NS20FC19, NS80FC20
16 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP10000ExDC-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [EM64T] 1.0 LP1050-E, LP1050DC-E, LP1050Ex-E, LP9002-E Copy 03.26
GA (LP9002L-E), LP9002C-E, LP9802-E, LP9802DC-E,
EMC Celerra: NS20FC19, NS80FC20 LP982-E;
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP, QLE2360-E-SP, QLE2362-E-SP
17 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c1, Asianux AX EMC SAN See7
CX3-80/CX3-40(F)/CX3-20(F)1 [EM64T] Copy 03.26
1.0: SP2,
SP3
18 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c1, Asianux AX EMC: 250-048-900, Integrated; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F)1 [EM64T] Copy 03.26
1.0: SP2, Hewlett Packard AB232A (LP9802);
SP3 NEC: NT2010A-A001 (QLA2340), NTAB232A (LP9802);
Unisys FCH742313-P64 (LP9802)
19 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c1, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See7
CX3-80/CX3-40(F)/CX3-20(F)1 [EM64T] LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 03.264
1.0: SP2, LP9802-E, LP9802DC-E, LP982-E;
SP3
QLogic: QLA2340-E-SP, QLA2342-E-SP
20 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c1, Asianux AX Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See7
CX3-80/CX3-40(F)/CX3-20(F)1 [EM64T] (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 03.26
1.0: SP2, (LP8000), Dual-port Fibre Channel Adapter for HP
SP3 Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic QLA2310F-E-SP
21 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [EM64T] 1.0 Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X5, 6; GA
EMC Celerra: NS-120, NS-480, NS-9602, 3
22 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [EM64T] 1.0 LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X5, 6; GA LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9602, 3 QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
23 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [EM64T] Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X5, 6; 1.0: GA, QLogic: QLE2360-E-SP, QLE2362-E-SP
SP2, SP3
EMC Celerra: NS-120, NS-480, NS-9602, 3
24 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC SAN See7
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [EM64T] Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X5, 6; 1.0: SP2,
SP3
EMC Celerra: NS-120, NS-480, NS-9602, 3
25 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [EM64T] Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X5, 6; 1.0: SP2, Emulex: LP11000-E, LP11002-E, LP1150-E,
SP3 LPe11000-E, LPe11000-E-G, LPe11002-E,
EMC Celerra: NS-120, NS-480, NS-9602, 3 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A6826A, A9782A8, 9, 10, 11,
12, 13, 14,
A9784A8, 9, 10, 11, 12, 13, 14, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A15, 16;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A (LP9802);
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLA4010-E-SP, QLA4010C-E-SP,
QLA4050-E-SP, QLA4050C-E-SP17, 18,
QLA4052C-E-SP17, 18, QLE2460-E-SP,
QLE2462-E-SP, QLE4060C-E-SP, QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)

03/02/2014 14 Information Management Software Array Capabilities


Information Management Software Array Capabilities
26 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See7
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [EM64T] LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X5, 6; 1.0: SP2, LP9802-E, LP9802DC-E, LP982-E;
SP3
EMC Celerra: NS-120, NS-480, NS-9602, 3 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
27 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [EM64T] 1.0 Copy 04.28
GA
EMC Celerra: NS-120, NS-480, NS-9602, 3
28 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [EM64T] 1.0 LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.28
GA LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9602, 3
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
29 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [EM64T] Copy 04.28
1.0: GA, QLogic: QLE2360-E-SP, QLE2362-E-SP
EMC Celerra: NS-120, NS-480, NS-9602, 3 SP2, SP3
30 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC SAN See7
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [EM64T] Copy 04.28
1.0: SP2,
EMC Celerra: NS-120, NS-480, NS-9602, 3 SP3
31 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [EM64T] Copy 04.28
1.0: SP2, Emulex: LP11000-E, LP11002-E, LP1150-E,
EMC Celerra: NS-120, NS-480, NS-9602, 3 SP3 LPe11000-E, LPe11000-E-G, LPe11002-E,
LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A6826A, A9782A8, 9, 10, 11,
12, 13, 14,
A9784A8, 9, 10, 11, 12, 13, 14, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A15, 16;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A (LP9802);
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLA4010-E-SP, QLA4010C-E-SP,
QLA4050-E-SP, QLA4050C-E-SP17, 18,
QLA4052C-E-SP17, 18, QLE2460-E-SP,
QLE2462-E-SP, QLE4060C-E-SP, QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
32 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See7
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [EM64T] LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.28
1.0: SP2, LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9602, 3 SP3
Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
33 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX EMC SAN
[EM64T] 1.0 Copy 02.23
GA
34 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
[EM64T] 1.0 LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 02.23
GA LP9802DC-E, LP982-E;
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP

03/02/2014 15 Information Management Software Array Capabilities


Information Management Software Array Capabilities
35 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
[EM64T] Copy 02.23
1.0: GA, QLogic: QLE2360-E-SP, QLE2362-E-SP
SP2, SP3
36 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX EMC SAN See7
[EM64T] Copy 02.23
1.0: SP2,
SP3
37 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX EMC: 250-048-900, Integrated; EMC SAN
[EM64T] Copy 02.23
1.0: SP2, Emulex: LP11000-E, LP11002-E, LP1150-E,
SP3 LPe11000-E, LPe11000-E-G, LPe11002-E,
LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Hewlett Packard: A6795A, A6826A, A9782A8, 9, 10, 11,
12, 13, 14,
A9784A8, 9, 10, 11, 12, 13, 14, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A15, 16;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A (LP9802);
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLA4050C-E-SP, QLA4052C-E-SP,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
38 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See7
[EM64T] LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.23
1.0: SP2, LP9802-E, LP9802DC-E, LP982-E;
SP3
Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
1. CLARiiON CX3-40c/CX3-20c requires minimum revision 03.22.xxx.5.50x.
2. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
3. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
4. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
5. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
6. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.
7. Windows 2000 hosts running less than SP4 could be susceptible to data loss during LUN expansion operations. This issue is corrected by Microsoft in SP4, or by applying hotfix
327020. See EMC Solution IS emc73538 and Microsoft Knowledge Base article 327020 for more information.
8. FC-AL, FC-SW topologies can co-exist on the same server but not on same HBA, provided that different topologies are attached to different HBAs; with the exception of the dual port
A6826A with one port FC-AL and the other port FC-SW.
9. Auto-sensing capability on the HBA is permanently enabled. There is no option to disable auto-sensing on the HBA.
10. The A9782A/A9784A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
11. The A9782A/A9784A fibre channel/GigE combo card only port qualified is fibre channel at this time.
12. The A9782A/A9784A HBA is capable of supporting both 1 and 2 Gb speeds.
13. The A9782A/A9784A the adapter operates in PCI 33 Mhz/66 Mhz and PCI-X 66 Mhz/100Mhz/133Mhz bus speeds with a 64-bit bus width
14. A6826A/A9784A/A9782A hbas: host must be configured as a 64Bit operating system.
15. The AB465A 2port/2Gig fibre channel/GigE combo card only qualified fibre channel port at this time.
16. The AB465A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
17. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator.
18. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator. Refer to the EMC Host Connectivity guide for additional information on Windows iSCSI components and the Microsoft iSCSI Software Initiator usage.
19. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
20. NS80FC has equivalent array attributes to CX3-80

Asianux AX [IA64]
Asianux AX [IA64]
Information
Operating Management
No. Storage Array System Host Bus Adapter Software Comments
1 Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
[IA64] 2.0: LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 02.26
GA, SP1 LP9802DC-E, LP982-E;
Hewlett Packard: Dual-port Fibre Channel Adapter for
HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);

03/02/2014 16 Information Management Software Array Capabilities


Information Management Software Array Capabilities

QLogic: QLA2200F-EMC, QLA2310F-E-SP,


QLA2340-E-SP, QLA2342-E-SP, QLE2360-E-SP,
QLE2362-E-SP
2 Asianux AX Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
[IA64] 2.0: Copy 02.26
GA, SP1; Hewlett Packard A6826A;
IBM: 00N6881 (QLA2200), 19K1246 (QLA2310)
Asianux AX
[IA64]: 3.0,
3.0 SP1
3 Asianux AX EMC SAN
[IA64]: 1.0 Copy 02.26
GA, 2.0 GA,
2.0 SP1
4 Asianux AX EMC SAN See3
[IA64]: 3.0, Copy 02.26
3.0 SP1
5 Asianux AX EMC SAN
[IA64]: 3.0, Copy: 02.23,
3.0 SP1 03.26
6 Asianux AX EMC: 250-048-900, Integrated; EMC SAN
[IA64]: 3.0, Copy 02.26
3.0 SP1 Fujitsu Ltd.: PW008FC2, PW008FC3;
Hewlett Packard: A6795A, A9782A8, 9, 10, 11, 12, 13, 14,
A9784A8, 9, 10, 11, 12, 13, 14, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A15, 16;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
7 Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
[IA64]: 3.0, LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.265
3.0 SP1 LP9802-E, LP9802DC-E, LP982-E;
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
8 Asianux AX Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
[IA64]: 3.0, LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 02.265
3.0 SP1 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLE2360-E-SP, QLE2362-E-SP,
QLE2460-E-SP, QLE2462-E-SP
9 Asianux AX Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See3
[IA64]: 3.0, (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 02.26
3.0 SP1 (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F)
10 EMC CLARiiON: AX4-5, CX3-10c, CX3-40c/CX3-20c, Asianux AX EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300; [IA64]: 3.0, Copy 02.26
3.0 SP1
EMC Celerra NX4 (FC)
11 EMC CLARiiON: AX4-5, CX300; Asianux AX EMC SAN
[IA64]: 3.0, Copy 03.26
EMC Celerra NX4 (FC) 3.0 SP1
12 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [IA64]: 3.0, Copy 03.26
3.0 SP1 Hewlett Packard: A6795A, A6826A, A9782A8, 9, 10, 11,
12, 13, 14, A9784A8, 9, 10, 11, 12, 13, 14, AB378A, AB379A
(QLA2462), AB465A15, 16;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
QLogic QLA2200F-EMC
13 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [IA64]: 3.0, LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 03.265
3.0 SP1 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP, QLE2360-E-SP,
QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
QLE4060C-E-SP, QLE4062C-E-SP
14 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300 [IA64]: 3.0, Copy 02.23
3.0 SP1
15 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP10000ExDC-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [IA64] 2.0: LP1050-E, LP1050DC-E, LP1050Ex-E, LP9002-E Copy 03.26
GA, SP1 (LP9002L-E), LP9002C-E, LP9802-E, LP9802DC-E,
EMC Celerra: NS20FC19, NS80FC20 LP982-E;
Hewlett Packard: A6826A, Dual-port Fibre Channel
Adapter for HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 00N6881 (QLA2200), 19K1246 (QLA2310),

03/02/2014 17 Information Management Software Array Capabilities


Information Management Software Array Capabilities

24P0960 (QLA2340), HS20 FC Exp Card


(13N2203/26R0836);
QLogic: QLA2200F-EMC, QLA2310F-E-SP,
QLA2340-E-SP, QLA2342-E-SP, QLE2360-E-SP,
QLE2362-E-SP
16 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [IA64]: 1.0 Copy 03.26
GA, 2.0 GA,
EMC Celerra: NS20FC19, NS80FC20 2.0 SP1
17 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c4, Asianux AX EMC SAN See3
CX3-80/CX3-40(F)/CX3-20(F)4 [IA64]: 3.0, Copy 03.26
3.0 SP1
18 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c4, Asianux AX EMC: 250-048-900, Integrated; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F)4 [IA64]: 3.0, Copy 03.26
3.0 SP1 Hewlett Packard AB232A (LP9802);
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
19 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c4, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
CX3-80/CX3-40(F)/CX3-20(F)4 [IA64]: 3.0, LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 03.265
3.0 SP1 LP9802-E, LP9802DC-E, LP982-E;
QLogic: QLA2340-E-SP, QLA2342-E-SP
20 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c4, Asianux AX Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See3
CX3-80/CX3-40(F)/CX3-20(F)4 [IA64]: 3.0, (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 03.26
3.0 SP1 (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic QLA2310F-E-SP
21 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IA64] 2.0: LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X1, 2; GA, SP1 LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9606, 7 Hewlett Packard: Dual-port Fibre Channel Adapter for
HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
22 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IA64] 2.0: Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X1, 2; GA, SP1; Hewlett Packard A6826A;
IBM: 00N6881 (QLA2200), 19K1246 (QLA2310);
EMC Celerra: NS-120, NS-480, NS-9606, 7 Asianux AX
[IA64]: 3.0, QLogic: QLA2200F-EMC, QLE2360-E-SP,
3.0 SP1 QLE2362-E-SP
23 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IA64]: 1.0 Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X1, 2; GA, 2.0 GA,
2.0 SP1
EMC Celerra: NS-120, NS-480, NS-9606, 7
24 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC SAN See3
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IA64]: 3.0, Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X1, 2; 3.0 SP1
EMC Celerra: NS-120, NS-480, NS-9606, 7
25 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IA64]: 3.0, Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X1, 2; 3.0 SP1 Emulex: LP11000-E, LP11002-E, LP1150-E,
LPe11000-E, LPe11000-E-G, LPe11002-E,
EMC Celerra: NS-120, NS-480, NS-9606, 7 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A9782A8, 9, 10, 11, 12, 13, 14,
A9784A8, 9, 10, 11, 12, 13, 14, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A15, 16;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4010-E-SP, QLA4010C-E-SP, QLA4050-E-SP,
QLA4050C-E-SP17, 18, QLA4052C-E-SP17, 18,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)

03/02/2014 18 Information Management Software Array Capabilities


Information Management Software Array Capabilities
26 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IA64]: 3.0, LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X1, 2; 3.0 SP1 LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9606, 7 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
27 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IA64] 2.0: LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.28
GA, SP1 LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9606, 7
Hewlett Packard: Dual-port Fibre Channel Adapter for
HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
28 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IA64] 2.0: Copy 04.28
GA, SP1; Hewlett Packard A6826A;
EMC Celerra: NS-120, NS-480, NS-9606, 7 IBM: 00N6881 (QLA2200), 19K1246 (QLA2310);
Asianux AX
[IA64]: 3.0, QLogic: QLA2200F-EMC, QLE2360-E-SP,
3.0 SP1 QLE2362-E-SP
29 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IA64]: 1.0 Copy 04.28
GA, 2.0 GA,
EMC Celerra: NS-120, NS-480, NS-9606, 7 2.0 SP1
30 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC SAN See3
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IA64]: 3.0, Copy 04.28
3.0 SP1
EMC Celerra: NS-120, NS-480, NS-9606, 7
31 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IA64]: 3.0, Copy 04.28
3.0 SP1 Emulex: LP11000-E, LP11002-E, LP1150-E,
EMC Celerra: NS-120, NS-480, NS-9606, 7 LPe11000-E, LPe11000-E-G, LPe11002-E,
LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A9782A8, 9, 10, 11, 12, 13, 14,
A9784A8, 9, 10, 11, 12, 13, 14, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A15, 16;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4010-E-SP, QLA4010C-E-SP, QLA4050-E-SP,
QLA4050C-E-SP17, 18, QLA4052C-E-SP17, 18,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
32 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IA64]: 3.0, LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.28
3.0 SP1 LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9606, 7
Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP

03/02/2014 19 Information Management Software Array Capabilities


Information Management Software Array Capabilities
33 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
[IA64] 2.0: LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 02.23
GA, SP1 LP9802DC-E, LP982-E;
Hewlett Packard: Dual-port Fibre Channel Adapter for
HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
34 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
[IA64] 2.0: Copy 02.23
GA, SP1; Hewlett Packard A6826A;
IBM: 00N6881 (QLA2200), 19K1246 (QLA2310);
Asianux AX
[IA64]: 3.0, QLogic: QLA2200F-EMC, QLE2360-E-SP,
3.0 SP1 QLE2362-E-SP
35 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX EMC SAN
[IA64]: 1.0 Copy 02.23
GA, 2.0 GA,
2.0 SP1
36 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX EMC SAN See3
[IA64]: 3.0, Copy 02.23
3.0 SP1
37 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX EMC: 250-048-900, Integrated; EMC SAN
[IA64]: 3.0, Copy 02.23
3.0 SP1 Emulex: LP11000-E, LP11002-E, LP1150-E,
LPe11000-E, LPe11000-E-G, LPe11002-E,
LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Hewlett Packard: A6795A, A9782A8, 9, 10, 11, 12, 13, 14,
A9784A8, 9, 10, 11, 12, 13, 14, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A15, 16;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP, QLE2460-E-SP,
QLE2462-E-SP, QLE4060C-E-SP, QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
38 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
[IA64]: 3.0, LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.23
3.0 SP1 LP9802-E, LP9802DC-E, LP982-E;
Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
1. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
2. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.
3. Windows 2000 hosts running less than SP4 could be susceptible to data loss during LUN expansion operations. This issue is corrected by Microsoft in SP4, or by applying hotfix
327020. See EMC Solution IS emc73538 and Microsoft Knowledge Base article 327020 for more information.
4. CLARiiON CX3-40c/CX3-20c requires minimum revision 03.22.xxx.5.50x.
5. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
6. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
7. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
8. FC-AL, FC-SW topologies can co-exist on the same server but not on same HBA, provided that different topologies are attached to different HBAs; with the exception of the dual port
A6826A with one port FC-AL and the other port FC-SW.
9. Auto-sensing capability on the HBA is permanently enabled. There is no option to disable auto-sensing on the HBA.
10. The A9782A/A9784A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
11. The A9782A/A9784A fibre channel/GigE combo card only port qualified is fibre channel at this time.
12. The A9782A/A9784A HBA is capable of supporting both 1 and 2 Gb speeds.
13. The A9782A/A9784A the adapter operates in PCI 33 Mhz/66 Mhz and PCI-X 66 Mhz/100Mhz/133Mhz bus speeds with a 64-bit bus width
14. A6826A/A9784A/A9782A hbas: host must be configured as a 64Bit operating system.
15. The AB465A 2port/2Gig fibre channel/GigE combo card only qualified fibre channel port at this time.
16. The AB465A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
17. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator.
18. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator. Refer to the EMC Host Connectivity guide for additional information on Windows iSCSI components and the Microsoft iSCSI Software Initiator usage.
19. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
20. NS80FC has equivalent array attributes to CX3-80

03/02/2014 20 Information Management Software Array Capabilities


Information Management Software Array Capabilities

Asianux AX [x86_64]
Asianux AX [x86_64]
Information
Operating Management
No. Storage Array System Host Bus Adapter Software Comments
1 Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
[x86_64] LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 02.26
2.0 SP1 LP9802DC-E, LP982-E;
Hewlett Packard: Dual-port Fibre Channel Adapter for
HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2200F-EMC, QLA2310F-E-SP,
QLA2340-E-SP, QLA2342-E-SP, QLE2360-E-SP,
QLE2362-E-SP
2 Asianux AX EMC SAN
[x86_64] Copy 02.26
2.0: GA,
SP1
3 Asianux AX Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
[x86_64] Copy 02.26
2.0: SP1, Hewlett Packard A6826A;
SP2; IBM: 00N6881 (QLA2200), 19K1246 (QLA2310)
Asianux AX
[x86_64]:
3.0, 3.0
SP1
4 Asianux AX EMC SAN See4
[x86_64]: Copy 02.26
2.0 SP2,
3.0, 3.0
SP1
5 Asianux AX EMC SAN
[x86_64]: Copy: 02.23,
2.0 SP2, 03.26
3.0, 3.0
SP1
6 Asianux AX EMC: 250-048-900, Integrated; EMC SAN
[x86_64]: Copy 02.26
2.0 SP2, Fujitsu Ltd.: PW008FC2, PW008FC3;
3.0, 3.0
SP1 Hewlett Packard: A6795A, A9782A12, 13, 14, 15, 16, 17,
18, A9784A12, 13, 14, 15, 16, 17, 18, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A8, 9;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
7 Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See4
[x86_64]: LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.261
2.0 SP2, LP9802-E, LP9802DC-E, LP982-E;
3.0, 3.0
SP1 QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
8 Asianux AX Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
[x86_64]: LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 02.261
2.0 SP2, LPe11002-E-G, LPe1150-E, LPe1150-E-G;
3.0, 3.0
SP1 QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLE2360-E-SP, QLE2362-E-SP,
QLE2460-E-SP, QLE2462-E-SP
9 Asianux AX Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See4
[x86_64]: (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 02.26
2.0 SP2, (LP8000), Dual-port Fibre Channel Adapter for HP
3.0, 3.0 Proliant BL20p G2 300874-B21, Dual-port Fibre
SP1 Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F)
10 EMC CLARiiON: AX4-5, CX3-10c, CX3-40c/CX3-20c, Asianux AX EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300; [x86_64]: Copy 02.26
2.0 SP2,
EMC Celerra NX4 (FC) 3.0, 3.0
SP1
11 EMC CLARiiON: AX4-5, CX300; Asianux AX EMC SAN
[x86_64]: Copy 03.26
EMC Celerra NX4 (FC) 2.0 SP2,
3.0, 3.0
SP1

03/02/2014 21 Information Management Software Array Capabilities


Information Management Software Array Capabilities
12 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [x86_64]: Copy 03.26
2.0 SP2, Hewlett Packard: A6795A, A6826A, A9782A12, 13, 14,
3.0, 3.0 15, 16, 17, 18, A9784A12, 13, 14, 15, 16, 17, 18, AB378A,
SP1 AB379A (QLA2462), AB465A8, 9;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
QLogic QLA2200F-EMC
13 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [x86_64]: LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 03.261
2.0 SP2, LPe11002-E-G, LPe1150-E, LPe1150-E-G;
3.0, 3.0
SP1 QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP, QLE2360-E-SP,
QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
QLE4060C-E-SP, QLE4062C-E-SP
14 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300 [x86_64]: Copy 02.23
2.0 SP2,
3.0, 3.0
SP1
15 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP10000ExDC-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [x86_64] LP1050-E, LP1050DC-E, LP1050Ex-E, LP9002-E Copy 03.26
2.0 SP1 (LP9002L-E), LP9002C-E, LP9802-E, LP9802DC-E,
EMC Celerra: NS20FC19, NS80FC20 LP982-E;
Hewlett Packard: A6826A, Dual-port Fibre Channel
Adapter for HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 00N6881 (QLA2200), 19K1246 (QLA2310),
24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2200F-EMC, QLA2310F-E-SP,
QLA2340-E-SP, QLA2342-E-SP, QLE2360-E-SP,
QLE2362-E-SP
16 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Asianux AX EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [x86_64] Copy 03.26
2.0: GA,
EMC Celerra: NS20FC19, NS80FC20 SP1
17 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c5, Asianux AX EMC SAN See4
CX3-80/CX3-40(F)/CX3-20(F)5 [x86_64]: Copy 03.26
2.0 SP2,
3.0, 3.0
SP1
18 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c5, Asianux AX EMC: 250-048-900, Integrated; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F)5 [x86_64]: Copy 03.26
2.0 SP2, Hewlett Packard AB232A (LP9802);
3.0, 3.0 NEC: NT2010A-A001 (QLA2340), NTAB232A
SP1 (LP9802);
Unisys FCH742313-P64 (LP9802)
19 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c5, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See4
CX3-80/CX3-40(F)/CX3-20(F)5 [x86_64]: LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 03.261
2.0 SP2, LP9802-E, LP9802DC-E, LP982-E;
3.0, 3.0
SP1 QLogic: QLA2340-E-SP, QLA2342-E-SP
20 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c5, Asianux AX Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See4
CX3-80/CX3-40(F)/CX3-20(F)5 [x86_64]: (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 03.26
2.0 SP2, (LP8000), Dual-port Fibre Channel Adapter for HP
3.0, 3.0 Proliant BL20p G2 300874-B21, Dual-port Fibre
SP1 Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic QLA2310F-E-SP
21 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [x86_64] LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X2, 3; 2.0 SP1 LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9606, 7 Hewlett Packard: Dual-port Fibre Channel Adapter for
HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
22 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [x86_64] Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X2, 3; 2.0: GA,
SP1
EMC Celerra: NS-120, NS-480, NS-9606, 7

03/02/2014 22 Information Management Software Array Capabilities


Information Management Software Array Capabilities
23 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [x86_64] Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X2, 3; 2.0: SP1, Hewlett Packard A6826A;
SP2; IBM: 00N6881 (QLA2200), 19K1246 (QLA2310);
EMC Celerra: NS-120, NS-480, NS-9606, 7
Asianux AX QLogic: QLA2200F-EMC, QLE2360-E-SP,
[x86_64]: QLE2362-E-SP
3.0, 3.0
SP1
24 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC SAN See4
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [x86_64]: Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X2, 3; 2.0 SP2,
3.0, 3.0
EMC Celerra: NS-120, NS-480, NS-9606, 7 SP1
25 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [x86_64]: Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X2, 3; 2.0 SP2, Emulex: LP11000-E, LP11002-E, LP1150-E,
3.0, 3.0 LPe11000-E, LPe11000-E-G, LPe11002-E,
EMC Celerra: NS-120, NS-480, NS-9606, 7 SP1 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A9782A12, 13, 14, 15, 16, 17,
18, A9784A12, 13, 14, 15, 16, 17, 18, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A8, 9;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4010-E-SP, QLA4010C-E-SP, QLA4050-E-SP,
QLA4050C-E-SP10, 11, QLA4052C-E-SP10, 11,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
26 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See4
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [x86_64]: LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X2, 3; 2.0 SP2, LP9802-E, LP9802DC-E, LP982-E;
3.0, 3.0
EMC Celerra: NS-120, NS-480, NS-9606, 7 SP1 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
27 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [x86_64] LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.28
2.0 SP1 LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9606, 7
Hewlett Packard: Dual-port Fibre Channel Adapter for
HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
28 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [x86_64] Copy 04.28
2.0: GA,
EMC Celerra: NS-120, NS-480, NS-9606, 7 SP1
29 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [x86_64] Copy 04.28
2.0: SP1, Hewlett Packard A6826A;
EMC Celerra: NS-120, NS-480, NS-9606, 7 SP2; IBM: 00N6881 (QLA2200), 19K1246 (QLA2310);
Asianux AX QLogic: QLA2200F-EMC, QLE2360-E-SP,
[x86_64]: QLE2362-E-SP
3.0, 3.0
SP1
30 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC SAN See4
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [x86_64]: Copy 04.28
2.0 SP2,
EMC Celerra: NS-120, NS-480, NS-9606, 7 3.0, 3.0
SP1
31 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [x86_64]: Copy 04.28
2.0 SP2, Emulex: LP11000-E, LP11002-E, LP1150-E,
EMC Celerra: NS-120, NS-480, NS-9606, 7 3.0, 3.0 LPe11000-E, LPe11000-E-G, LPe11002-E,
SP1 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A9782A12, 13, 14, 15, 16, 17,
18, A9784A12, 13, 14, 15, 16, 17, 18, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A8, 9;

03/02/2014 23 Information Management Software Array Capabilities


Information Management Software Array Capabilities

IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,


6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4010-E-SP, QLA4010C-E-SP, QLA4050-E-SP,
QLA4050C-E-SP10, 11, QLA4052C-E-SP10, 11,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
32 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See4
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [x86_64]: LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.28
2.0 SP2, LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9606, 7 3.0, 3.0
SP1 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
33 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
[x86_64] LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 02.23
2.0 SP1 LP9802DC-E, LP982-E;
Hewlett Packard: Dual-port Fibre Channel Adapter for
HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
34 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX EMC SAN
[x86_64] Copy 02.23
2.0: GA,
SP1
35 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
[x86_64] Copy 02.23
2.0: SP1, Hewlett Packard A6826A;
SP2; IBM: 00N6881 (QLA2200), 19K1246 (QLA2310);
Asianux AX QLogic: QLA2200F-EMC, QLE2360-E-SP,
[x86_64]: QLE2362-E-SP
3.0, 3.0
SP1
36 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX EMC SAN See4
[x86_64]: Copy 02.23
2.0 SP2,
3.0, 3.0
SP1
37 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX EMC: 250-048-900, Integrated; EMC SAN
[x86_64]: Copy 02.23
2.0 SP2, Emulex: LP11000-E, LP11002-E, LP1150-E,
3.0, 3.0 LPe11000-E, LPe11000-E-G, LPe11002-E,
SP1 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Hewlett Packard: A6795A, A9782A12, 13, 14, 15, 16, 17,
18, A9784A12, 13, 14, 15, 16, 17, 18, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A8, 9;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP, QLE2460-E-SP,
QLE2462-E-SP, QLE4060C-E-SP, QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
38 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Asianux AX Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See4
[x86_64]: LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.23
2.0 SP2, LP9802-E, LP9802DC-E, LP982-E;
3.0, 3.0
SP1 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card

03/02/2014 24 Information Management Software Array Capabilities


Information Management Software Array Capabilities

(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
1. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
2. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
3. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.
4. Windows 2000 hosts running less than SP4 could be susceptible to data loss during LUN expansion operations. This issue is corrected by Microsoft in SP4, or by applying hotfix
327020. See EMC Solution IS emc73538 and Microsoft Knowledge Base article 327020 for more information.
5. CLARiiON CX3-40c/CX3-20c requires minimum revision 03.22.xxx.5.50x.
6. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
7. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
8. The AB465A 2port/2Gig fibre channel/GigE combo card only qualified fibre channel port at this time.
9. The AB465A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
10. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator.
11. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator. Refer to the EMC Host Connectivity guide for additional information on Windows iSCSI components and the Microsoft iSCSI Software Initiator usage.
12. FC-AL, FC-SW topologies can co-exist on the same server but not on same HBA, provided that different topologies are attached to different HBAs; with the exception of the dual port
A6826A with one port FC-AL and the other port FC-SW.
13. Auto-sensing capability on the HBA is permanently enabled. There is no option to disable auto-sensing on the HBA.
14. The A9782A/A9784A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
15. The A9782A/A9784A fibre channel/GigE combo card only port qualified is fibre channel at this time.
16. The A9782A/A9784A HBA is capable of supporting both 1 and 2 Gb speeds.
17. The A9782A/A9784A the adapter operates in PCI 33 Mhz/66 Mhz and PCI-X 66 Mhz/100Mhz/133Mhz bus speeds with a 64-bit bus width
18. A6826A/A9784A/A9782A hbas: host must be configured as a 64Bit operating system.
19. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
20. NS80FC has equivalent array attributes to CX3-80

Fujitsu Ltd. Solaris


Fujitsu Ltd. Solaris
Information
Management
No. Storage Array Operating System Host Bus Adapter Software
1 Fujitsu Ltd. Solaris: 8 Fujitsu Ltd.: EMC SAN Copy
SPARC6, 9 SPARC1 PW008FC2, 02.26
PW008FC3
2 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Fujitsu Ltd. Solaris 9 Fujitsu Ltd.: EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, SPARC1 PW008FC2, 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X2, 3; PW008FC3
EMC Celerra: NS-120, NS-480, NS-9604, 5
3 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Fujitsu Ltd. Solaris 9 Fujitsu Ltd.: EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; SPARC1 PW008FC2, 04.28
PW008FC3
EMC Celerra: NS-120, NS-480, NS-9604, 5
1. There is only one Solaris; however, Fujitsu customers must obtain Solaris media, Solaris patches, and Solaris support from their regional Fujitsu support provider. Fujitsu provides
Solaris patches in a convenient package called PTF. Fujitsu recommends customers install the latest PTF: version R13111.
Fujitsu and EMC recommend as a best practice that customers also upgrade to the most recent Solaris 9 patch cluster, available from Fujitsu's regional support providers.
2. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
3. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.
4. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
5. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
6. There is only one Solaris; however, Fujitsu customers must obtain Solaris media, Solaris patches, and Solaris support from their regional Fujitsu support provider. Fujitsu provides
Solaris patches in a convenient package called PTF. Fujitsu recommends customers install the latest PTF: version R11111.
Fujitsu and EMC recommend as a best practice that customers also upgrade to the most recent Solaris 8 patch cluster, available from Fujitsu's regional support providers.

Hewlett Packard HP-UX


Hewlett Packard HP-UX
Information
Management
No. Storage Array Operating System Host Bus Adapter Software
1 Hewlett Packard HP-UX Hewlett Packard: A6826A, EMC SAN Copy
11i v2 (HP-UX 11.23) A9782A4, 5, 6, 7, 8, 9, 10, A9784A4, 5, 02.26
6, 7, 8, 9, 10, AB378A, AB379A
(QLA2462), AB465A2, 3
2 Hewlett Packard HP-UX EMC SAN Copy:
11i v3 (HP-UX 11.31) 02.23, 03.26
3 Hewlett Packard HP-UX Hewlett Packard A6795A EMC SAN Copy
11i: v1.0 (HP-UX 11.11), 02.26
v2 (HP-UX 11.23)
4 Hewlett Packard HP-UX EMC SAN Copy
11i: v1.0 (HP-UX 11.11), 02.26
v2 (HP-UX 11.23), v3
(HP-UX 11.31)
5 EMC CLARiiON: AX4-5, CX3-10c, CX3-40c/CX3-20c, Hewlett Packard HP-UX EMC SAN Copy:
CX3-80/CX3-40(F)/CX3-20(F), CX300; 11i v3 (HP-UX 11.31) 02.23, 02.26, 03.26
EMC Celerra NX4 (FC)

03/02/2014 25 Information Management Software Array Capabilities


Information Management Software Array Capabilities
6 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, CX3-80/CX3-40(F)/CX3-20(F); Hewlett Packard HP-UX Hewlett Packard: A6826A, EMC SAN Copy
11i v2 (HP-UX 11.23) A9782A4, 5, 6, 7, 8, 9, 10, A9784A4, 5, 03.26
EMC Celerra: NS20FC1, NS80FC13 6, 7, 8, 9, 10, AB378A, AB379A
(QLA2462), AB465A2, 3
7 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, CX3-80/CX3-40(F)/CX3-20(F); Hewlett Packard HP-UX EMC SAN Copy
11i: v1.0 (HP-UX 11.11), 03.26
EMC Celerra: NS20FC1, NS80FC13 v2 (HP-UX 11.23)
8 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, CX3-80/CX3-40(F)/CX3-20(F); Hewlett Packard HP-UX Hewlett Packard A6795A EMC SAN Copy
11i: v1.0 (HP-UX 11.11), 03.26
EMC Celerra: NS20FC1, NS80FC13 v2 (HP-UX 11.23)
9 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Hewlett Packard HP-UX Hewlett Packard: AB378A, AB379A EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, 11i v2 (HP-UX 11.23) (QLA2462), AB465A2, 3 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X14, 15;
EMC Celerra: NS-120, NS-480, NS-96011, 12
10 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Hewlett Packard HP-UX Hewlett Packard: A6795A, A6826A, EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, 11i: v1.0 (HP-UX 11.11), A9782A4, 5, 6, 7, 8, 9, 10,
A9784A4, 5, 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X14, 15; v2 (HP-UX 11.23) 6, 7, 8, 9, 10

EMC Celerra: NS-120, NS-480, NS-96011, 12


11 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Hewlett Packard HP-UX EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, 11i: v1.0 (HP-UX 11.11), 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X14, 15; v2 (HP-UX 11.23), v3
(HP-UX 11.31)
EMC Celerra: NS-120, NS-480, NS-96011, 12
12 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Hewlett Packard HP-UX Hewlett Packard: AB378A, AB379A EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; 11i v2 (HP-UX 11.23) (QLA2462), AB465A2, 3 04.28
EMC Celerra: NS-120, NS-480, NS-96011, 12
13 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Hewlett Packard HP-UX Hewlett Packard: A6795A, A6826A, EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; 11i: v1.0 (HP-UX 11.11), A9782A4, 5, 6, 7, 8, 9, 10,
A9784A4, 5, 04.28
v2 (HP-UX 11.23) 6, 7, 8, 9, 10
EMC Celerra: NS-120, NS-480, NS-96011, 12
14 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Hewlett Packard HP-UX EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; 11i: v1.0 (HP-UX 11.11), 04.28
v2 (HP-UX 11.23), v3
EMC Celerra: NS-120, NS-480, NS-96011, 12 (HP-UX 11.31)
15 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Hewlett Packard HP-UX Hewlett Packard: A6826A, EMC SAN Copy
11i v2 (HP-UX 11.23) A9782A4, 5, 6, 7, 8, 9, 10, A9784A4, 5, 02.23
6, 7, 8, 9, 10, AB378A, AB379A
(QLA2462), AB465A2, 3
16 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Hewlett Packard HP-UX EMC SAN Copy
11i: v1.0 (HP-UX 11.11), 02.23
v2 (HP-UX 11.23)
17 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Hewlett Packard HP-UX Hewlett Packard A6795A EMC SAN Copy
11i: v1.0 (HP-UX 11.11), 02.23
v2 (HP-UX 11.23)
1. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
2. The AB465A 2port/2Gig fibre channel/GigE combo card only qualified fibre channel port at this time.
3. The AB465A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
4. FC-AL, FC-SW topologies can co-exist on the same server but not on same HBA, provided that different topologies are attached to different HBAs; with the exception of the dual port
A6826A with one port FC-AL and the other port FC-SW.
5. Auto-sensing capability on the HBA is permanently enabled. There is no option to disable auto-sensing on the HBA.
6. The A9782A/A9784A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
7. The A9782A/A9784A fibre channel/GigE combo card only port qualified is fibre channel at this time.
8. The A9782A/A9784A HBA is capable of supporting both 1 and 2 Gb speeds.
9. The A9782A/A9784A the adapter operates in PCI 33 Mhz/66 Mhz and PCI-X 66 Mhz/100Mhz/133Mhz bus speeds with a 64-bit bus width
10. A6826A/A9784A/A9782A hbas: host must be configured as a 64Bit operating system.
11. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
12. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
13. NS80FC has equivalent array attributes to CX3-80
14. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
15. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.

IBM AIX
IBM AIX
Information
Management
No. Storage Array Operating System Host Bus Adapter Software
1 IBM AIX: 5.13, 4, 11, IBM: 6227, 6228, EMC SAN Copy
5.23, 4, 5.35, 6, 7, 6.11 6239 02.26
2 IBM AIX: 5.23, 4, 5.35, IBM 5716 EMC SAN Copy
6, 7,
6.11 02.26
3 IBM AIX: 5.35, 6, 7, 6.11 IBM: 1905, 1910, EMC SAN Copy
1977, 5758, 5759, 02.26
5773, 5774
4 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, CX3-80/CX3-40(F)/CX3-20(F); IBM AIX: 5.23, 4, 5.35, IBM: 5716, 6227, EMC SAN Copy
6, 7,
6.11 6228, 6239 03.26
EMC Celerra: NS20FC2, NS80FC8
5 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, CX3-80/CX3-40(F)/CX3-20(F); IBM AIX: 5.35, 6, 7, 6.11 IBM: 1905, 1910, EMC SAN Copy
1977, 5758, 5759, 03.26
EMC Celerra: NS20FC2, NS80FC8 5773, 5774
6 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, IBM AIX: 5.23, 4, 5.35, IBM: 5716, 6227, EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, 6, 7,
6.11 6228, 6239 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X12, 13;
EMC Celerra: NS-120, NS-480, NS-9609, 10
7 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, IBM AIX: 5.35, 6, 7, 6.11 IBM: 1905, 1910, EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, 1977, 5758, 5759, 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X12, 13; 5773, 5774
EMC Celerra: NS-120, NS-480, NS-9609, 10

03/02/2014 26 Information Management Software Array Capabilities


Information Management Software Array Capabilities
8 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, IBM AIX: 5.23, 4, 5.35, IBM: 5716, 6227, EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; 6, 7,
6.11 6228, 6239 04.28
EMC Celerra: NS-120, NS-480, NS-9609, 10
9 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, IBM AIX: 5.35, 6, 7, 6.11 IBM: 1905, 1910, EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; 1977, 5758, 5759, 04.28
5773, 5774
EMC Celerra: NS-120, NS-480, NS-9609, 10
10 EMC: CLARiiON AX4-5, Celerra NX4 (FC) IBM AIX: 5.23, 4, 5.35, IBM: 5716, 6227, EMC SAN Copy
6, 7,
6.11 6228, 6239 02.23
11 EMC: CLARiiON AX4-5, Celerra NX4 (FC) IBM AIX: 5.35, 6, 7, 6.11 IBM: 1905, 1910, EMC SAN Copy
1977, 5758, 5759, 02.23
5773, 5774
1. Requires Minimum EMC ODM fileset support 5.3.0.1.
2. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
3. Requires EMC ODM 5.1.0.0 or later fileset support.
4. Requires Flare code 2.06 or later (CX-series) and 8.51 or later (FC4700).
5. Requires EMC ODM 5.2.0.0 or later fileset support for Flare code 2.06 or later (CX-series) and 8.51 or later (FC4700).
6. Requires EMC ODM 5.2.0.0 or later fileset support.
7. Requires EMC ODM 5.2.0.1 or later fileset support.
8. NS80FC has equivalent array attributes to CX3-80
9. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
10. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
11. AIX 5.1 has reached End of Service (EOS) April 2006. After this date, AIX 5.1 will only be supported for customers that have purchased a "Fee Based Service Extension" contract
from IBM.
12. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
13. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.

Microsoft Windows 2008 R2 SP1 [IA64]


Microsoft Windows 2008 R2 SP1 [IA64]
Information
Management
No. Storage Array Operating System Host Bus Adapter Software
1 Microsoft Windows EMC SAN Copy
2008 R2 SP1 [IA64] for 02.26
Itanium-Based
Systems
2 Microsoft Windows EMC: 250-048-900, Integrated; EMC SAN Copy
2008 R2 SP1 [IA64] for 02.26
Itanium-Based Emulex: LP10000-E, LP10000DC-E, LP1050-E, LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
Systems
Hewlett Packard: A7298A (LP982), AB232A (LP9802), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP Proliant BL30p/BL35p 354054-B21,
FCA2214/281541-B21 (QLA2340), FCA2214DC/321835-B21 (QLA2342), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC), FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM HS20 FC Exp Card (13N2203/26R0836);
NEC: N8803-031 (QLA2310F), NT2010A-A001 (QLA2340), NTAB232A (LP9802);
QLogic: QLA2310F-E-SP, QLA2340-E-SP, QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)
3 EMC: Microsoft Windows EMC SAN Copy
CLARiiON 2008 R2 SP1 [IA64] for 02.23
AX4-5, Celerra Itanium-Based
NX4 (FC) Systems
4 EMC: Microsoft Windows EMC: 250-048-900, Integrated; EMC SAN Copy
CLARiiON 2008 R2 SP1 [IA64] for 02.23
AX4-5, Celerra Itanium-Based Emulex: LP10000-E, LP10000DC-E, LP1050-E, LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
NX4 (FC) Systems
Hewlett Packard: A7298A (LP982), AB232A (LP9802), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP Proliant BL30p/BL35p 354054-B21,
FCA2214/281541-B21 (QLA2340), FCA2214DC/321835-B21 (QLA2342), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC), FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM HS20 FC Exp Card (13N2203/26R0836);
NEC: N8803-031 (QLA2310F), NT2010A-A001 (QLA2340), NTAB232A (LP9802);
QLogic: QLA2310F-E-SP, QLA2340-E-SP, QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)

Microsoft Windows 2008 R2 SP1 [x64]


Microsoft Windows 2008 R2 SP1 [x64]
Information
Management
No. Storage Array Operating System Host Bus Adapter Software
1 Microsoft Windows 2008 EMC SAN
R2 SP1 [x64]: DataCenter, Copy 02.26
Enterprise Edition,
Standard Edition, Storage
Server
2 Microsoft Windows 2008 EMC: 250-048-900, Integrated; EMC SAN
R2 SP1 [x64]: DataCenter, Copy 02.26
Enterprise Edition, Emulex: LP10000-E, LP10000DC-E, LP1050-E, LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
Standard Edition, Storage
Server Hewlett Packard: A7298A (LP982), AB232A (LP9802), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP Proliant BL30p/BL35p 354054-B21,
FCA2214/281541-B21 (QLA2340), FCA2214DC/321835-B21 (QLA2342), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC), FCA2408 (LP982), HP QLogic-based Fibre
Channel Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM HS20 FC Exp Card (13N2203/26R0836);
NEC: N8803-031 (QLA2310F), NT2010A-A001 (QLA2340), NTAB232A (LP9802);
QLogic: QLA2310F-E-SP, QLA2340-E-SP, QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)

03/02/2014 27 Information Management Software Array Capabilities


Information Management Software Array Capabilities
3 EMC: CLARiiON Microsoft Windows 2008 EMC SAN
AX4-5, Celerra R2 SP1 [x64]: DataCenter, Copy 02.23
NX4 (FC) Enterprise Edition,
Standard Edition, Storage
Server
4 EMC: CLARiiON Microsoft Windows 2008 EMC: 250-048-900, Integrated; EMC SAN
AX4-5, Celerra R2 SP1 [x64]: DataCenter, Copy 02.23
NX4 (FC) Enterprise Edition, Emulex: LP10000-E, LP10000DC-E, LP1050-E, LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
Standard Edition, Storage
Server Hewlett Packard: A7298A (LP982), AB232A (LP9802), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP Proliant BL30p/BL35p 354054-B21,
FCA2214/281541-B21 (QLA2340), FCA2214DC/321835-B21 (QLA2342), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC), FCA2408 (LP982), HP QLogic-based Fibre
Channel Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM HS20 FC Exp Card (13N2203/26R0836);
NEC: N8803-031 (QLA2310F), NT2010A-A001 (QLA2340), NTAB232A (LP9802);
QLogic: QLA2310F-E-SP, QLA2340-E-SP, QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)

Microsoft Windows 2008 R2 [IA64]


Microsoft Windows 2008 R2 [IA64]
Information
Management
No. Storage Array Operating System Host Bus Adapter Software
1 Microsoft Windows EMC SAN Copy
2008 R2 [IA64] for 02.26
Itanium-Based
Systems
2 Microsoft Windows EMC: 250-048-900, Integrated; EMC SAN Copy
2008 R2 [IA64] for 02.26
Itanium-Based Emulex: LP10000-E, LP10000DC-E, LP1050-E, LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
Systems
Hewlett Packard: A7298A (LP982), AB232A (LP9802), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP Proliant BL30p/BL35p 354054-B21,
FCA2214/281541-B21 (QLA2340), FCA2214DC/321835-B21 (QLA2342), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC), FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM HS20 FC Exp Card (13N2203/26R0836);
NEC: N8803-031 (QLA2310F), NT2010A-A001 (QLA2340), NTAB232A (LP9802);
QLogic: QLA2310F-E-SP, QLA2340-E-SP, QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)
3 EMC: Microsoft Windows EMC SAN Copy
CLARiiON 2008 R2 [IA64] for 02.23
AX4-5, Celerra Itanium-Based
NX4 (FC) Systems
4 EMC: Microsoft Windows EMC: 250-048-900, Integrated; EMC SAN Copy
CLARiiON 2008 R2 [IA64] for 02.23
AX4-5, Celerra Itanium-Based Emulex: LP10000-E, LP10000DC-E, LP1050-E, LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
NX4 (FC) Systems
Hewlett Packard: A7298A (LP982), AB232A (LP9802), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP Proliant BL30p/BL35p 354054-B21,
FCA2214/281541-B21 (QLA2340), FCA2214DC/321835-B21 (QLA2342), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC), FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM HS20 FC Exp Card (13N2203/26R0836);
NEC: N8803-031 (QLA2310F), NT2010A-A001 (QLA2340), NTAB232A (LP9802);
QLogic: QLA2310F-E-SP, QLA2340-E-SP, QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)

Microsoft Windows 2008 R2 [x64]


Microsoft Windows 2008 R2 [x64]
Information
Management
No. Storage Array Operating System Host Bus Adapter Software
1 Microsoft Windows EMC SAN
2008 R2 [x64]: Copy 02.26
DataCenter, Enterprise
Edition, Standard
Edition
2 Microsoft Windows EMC: 250-048-900, Integrated; EMC SAN
2008 R2 [x64]: Copy 02.26
DataCenter, Enterprise Emulex: LP10000-E, LP10000DC-E, LP1050-E, LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
Edition, Standard
Edition Hewlett Packard: A7298A (LP982), AB232A (LP9802), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP Proliant BL30p/BL35p 354054-B21,
FCA2214/281541-B21 (QLA2340), FCA2214DC/321835-B21 (QLA2342), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC), FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM HS20 FC Exp Card (13N2203/26R0836);
NEC: N8803-031 (QLA2310F), NT2010A-A001 (QLA2340), NTAB232A (LP9802);
QLogic: QLA2310F-E-SP, QLA2340-E-SP, QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)

03/02/2014 28 Information Management Software Array Capabilities


Information Management Software Array Capabilities
3 EMC: CLARiiON Microsoft Windows EMC SAN
AX4-5, Celerra 2008 R2 [x64]: Copy 02.23
NX4 (FC) DataCenter, Enterprise
Edition, Standard
Edition
4 EMC: CLARiiON Microsoft Windows EMC: 250-048-900, Integrated; EMC SAN
AX4-5, Celerra 2008 R2 [x64]: Copy 02.23
NX4 (FC) DataCenter, Enterprise Emulex: LP10000-E, LP10000DC-E, LP1050-E, LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
Edition, Standard
Edition Hewlett Packard: A7298A (LP982), AB232A (LP9802), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP Proliant BL30p/BL35p 354054-B21,
FCA2214/281541-B21 (QLA2340), FCA2214DC/321835-B21 (QLA2342), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC), FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM HS20 FC Exp Card (13N2203/26R0836);
NEC: N8803-031 (QLA2310F), NT2010A-A001 (QLA2340), NTAB232A (LP9802);
QLogic: QLA2310F-E-SP, QLA2340-E-SP, QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)

Microsoft Windows 2008 [IA64]


Microsoft Windows 2008 [IA64]
Information
Management
No. Storage Array Operating System Host Bus Adapter Software
1 Microsoft Windows EMC SAN Copy
2008 [IA64] for 02.26
Itanium-Based
Systems
2 Microsoft Windows EMC: 250-048-900, Integrated; EMC SAN Copy
2008 [IA64] for 02.26
Itanium-Based Emulex: LP10000-E, LP10000DC-E, LP1050-E, LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
Systems
Hewlett Packard: A7298A (LP982), AB232A (LP9802), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP Proliant BL30p/BL35p 354054-B21,
FCA2214/281541-B21 (QLA2340), FCA2214DC/321835-B21 (QLA2342), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC), FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM HS20 FC Exp Card (13N2203/26R0836);
NEC: N8803-031 (QLA2310F), NT2010A-A001 (QLA2340), NTAB232A (LP9802);
QLogic: QLA2310F-E-SP, QLA2340-E-SP, QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)
3 EMC: Microsoft Windows EMC SAN Copy
CLARiiON 2008 [IA64] for 02.23
AX4-5, Celerra Itanium-Based
NX4 (FC) Systems
4 EMC: Microsoft Windows EMC: 250-048-900, Integrated; EMC SAN Copy
CLARiiON 2008 [IA64] for 02.23
AX4-5, Celerra Itanium-Based Emulex: LP10000-E, LP10000DC-E, LP1050-E, LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
NX4 (FC) Systems
Hewlett Packard: A7298A (LP982), AB232A (LP9802), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP Proliant BL30p/BL35p 354054-B21,
FCA2214/281541-B21 (QLA2340), FCA2214DC/321835-B21 (QLA2342), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC), FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM HS20 FC Exp Card (13N2203/26R0836);
NEC: N8803-031 (QLA2310F), NT2010A-A001 (QLA2340), NTAB232A (LP9802);
QLogic: QLA2310F-E-SP, QLA2340-E-SP, QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)

Microsoft Windows 2008 [x64]


Microsoft Windows 2008 [x64]
Information
Management
No. Storage Array Operating System Host Bus Adapter Software
1 Microsoft Windows EMC SAN Copy
2008 [x64]: 02.26
DataCenter, Enterprise
Edition, Standard
Edition
2 Microsoft Windows EMC: 250-048-900, Integrated; EMC SAN Copy
2008 [x64]: 02.26
DataCenter, Enterprise Emulex: LP10000-E, LP10000DC-E, LP1050-E, LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
Edition, Standard
Edition Hewlett Packard: A7298A (LP982), AB232A (LP9802), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP Proliant BL30p/BL35p 354054-B21,
FCA2214/281541-B21 (QLA2340), FCA2214DC/321835-B21 (QLA2342), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC), FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM HS20 FC Exp Card (13N2203/26R0836);
NEC: N8803-031 (QLA2310F), NT2010A-A001 (QLA2340), NTAB232A (LP9802);
QLogic: QLA2310F-E-SP, QLA2340-E-SP, QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)

03/02/2014 29 Information Management Software Array Capabilities


Information Management Software Array Capabilities
3 EMC: Microsoft Windows EMC SAN Copy
CLARiiON 2008 [x64]: 02.23
AX4-5, Celerra DataCenter, Enterprise
NX4 (FC) Edition, Standard
Edition
4 EMC: Microsoft Windows EMC: 250-048-900, Integrated; EMC SAN Copy
CLARiiON 2008 [x64]: 02.23
AX4-5, Celerra DataCenter, Enterprise Emulex: LP10000-E, LP10000DC-E, LP1050-E, LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
NX4 (FC) Edition, Standard
Edition Hewlett Packard: A7298A (LP982), AB232A (LP9802), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP Proliant BL30p/BL35p 354054-B21,
FCA2214/281541-B21 (QLA2340), FCA2214DC/321835-B21 (QLA2342), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC), FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM HS20 FC Exp Card (13N2203/26R0836);
NEC: N8803-031 (QLA2310F), NT2010A-A001 (QLA2340), NTAB232A (LP9802);
QLogic: QLA2310F-E-SP, QLA2340-E-SP, QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)

Microsoft Windows 2008 [x86]


Microsoft Windows 2008 [x86]
Information
Management
No. Storage Array Operating System Host Bus Adapter Software
1 Microsoft Windows EMC SAN Copy
2008 [x86]: 02.26
DataCenter, Enterprise
Edition, Standard
Edition
2 Microsoft Windows EMC: 250-048-900, Integrated; EMC SAN Copy
2008 [x86]: 02.26
DataCenter, Enterprise Emulex: LP10000-E, LP10000DC-E, LP1050-E, LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
Edition, Standard
Edition Hewlett Packard: A7298A (LP982), AB232A (LP9802), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP Proliant BL30p/BL35p 354054-B21,
FCA2214/281541-B21 (QLA2340), FCA2214DC/321835-B21 (QLA2342), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC), FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM HS20 FC Exp Card (13N2203/26R0836);
NEC: N8803-031 (QLA2310F), NT2010A-A001 (QLA2340), NTAB232A (LP9802);
QLogic: QLA2310F-E-SP, QLA2340-E-SP, QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)
3 EMC: Microsoft Windows EMC SAN Copy
CLARiiON 2008 [x86]: 02.23
AX4-5, Celerra DataCenter, Enterprise
NX4 (FC) Edition, Standard
Edition
4 EMC: Microsoft Windows EMC: 250-048-900, Integrated; EMC SAN Copy
CLARiiON 2008 [x86]: 02.23
AX4-5, Celerra DataCenter, Enterprise Emulex: LP10000-E, LP10000DC-E, LP1050-E, LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
NX4 (FC) Edition, Standard
Edition Hewlett Packard: A7298A (LP982), AB232A (LP9802), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP Proliant BL30p/BL35p 354054-B21,
FCA2214/281541-B21 (QLA2340), FCA2214DC/321835-B21 (QLA2342), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC), FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM HS20 FC Exp Card (13N2203/26R0836);
NEC: N8803-031 (QLA2310F), NT2010A-A001 (QLA2340), NTAB232A (LP9802);
QLogic: QLA2310F-E-SP, QLA2340-E-SP, QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)

Novell Netware
Novell Netware
No. Operating System Host Bus Adapter Information Management Software
1 Novell Netware 6.51, 2 QLogic: QLA2200F-EMC, QLA2310F-E-SP, QLA2340-E-SP EMC SAN Copy 02.26
1. NetWare NSS has 256 LUN per port limitation. If NSS will not be used, 128 LUNs is supported.
2. Shared HBA environments between disk and tape/tape libraries are not supported for Novell.

Oracle Linux [32-Bit]


Oracle Linux [32-Bit]
Information
Operating Management
No. Storage Array System Host Bus Adapter Software Comments
1 Oracle EMC SAN See1
Linux Copy 02.26
[32-Bit] 4:
U6, U7;
Oracle
Linux
[32-Bit]:
5.04, 5.14,
5.24

03/02/2014 30 Information Management Software Array Capabilities


Information Management Software Array Capabilities
2 Oracle EMC SAN
Linux Copy: 02.23,
[32-Bit] 4: 03.26
U6, U7;
Oracle
Linux
[32-Bit]:
5.04, 5.14,
5.24
3 Oracle EMC: 250-048-900, Integrated; EMC SAN
Linux Copy 02.26
[32-Bit] 4: Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E;
U6, U7;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Oracle
Linux Hewlett Packard: A6795A, A6826A, A9782A13, 14, 15, 16,
[32-Bit]: 17, 18, 19, A9784A13, 14, 15, 16, 17, 18, 19, AB232A
5.04, 5.14, (LP9802), AB378A, AB379A (QLA2462), AB465A9, 10;
5.24
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
4 Oracle Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See1
Linux LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.266
[32-Bit] 4: LP9802-E, LP9802DC-E, LP982-E;
U6, U7;
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
Oracle QLA2342-E-SP
Linux
[32-Bit]:
5.04, 5.14,
5.24
5 Oracle Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
Linux LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 02.266
[32-Bit] 4: LPe11002-E-G, LPe1150-E, LPe1150-E-G;
U6, U7;
QLogic: QLA2200F-EMC, QLA2460-E-SP,
Oracle QLA2462-E-SP, QLE2360-E-SP, QLE2362-E-SP,
Linux QLE2460-E-SP, QLE2462-E-SP
[32-Bit]:
5.04, 5.14,
5.24
6 Oracle Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See1
Linux (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 02.26
[32-Bit] 4: (LP8000), Dual-port Fibre Channel Adapter for HP
U6, U7; Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
Oracle 381881-B21, Dual-port Fibre Channel Adapter for HP
Linux Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
[32-Bit]: FCA2214/281541-B21 (QLA2340),
5.04, 5.14, FCA2214DC/321835-B21 (QLA2342), FCA2354
5.24 (LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F)
7 EMC CLARiiON: AX4-5, CX3-10c, CX3-40c/CX3-20c, Oracle EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300; Linux Copy 02.26
[32-Bit] 4:
EMC Celerra NX4 (FC) U6, U7;
Oracle
Linux
[32-Bit]:
5.04, 5.14,
5.24
8 EMC CLARiiON: AX4-5, CX300; Oracle EMC SAN
Linux Copy 03.26
EMC Celerra NX4 (FC) [32-Bit] 4:
U6, U7;
Oracle
Linux
[32-Bit]:
5.04, 5.14,
5.24
9 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Oracle Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) Linux Copy 03.26
[32-Bit] 4: Hewlett Packard: A6795A, A6826A, A9782A13, 14, 15, 16,
U6, U7; 17, 18, 19, A9784A13, 14, 15, 16, 17, 18, 19, AB378A,
AB379A (QLA2462), AB465A9, 10;
Oracle
Linux IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
[32-Bit]: (QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
5.04, 5.14, 6239;
5.24
QLogic QLA2200F-EMC
10 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Oracle Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) Linux LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 03.266
[32-Bit] 4: LPe11002-E-G, LPe1150-E, LPe1150-E-G;
U6, U7;
QLogic: QLA2460-E-SP, QLA2462-E-SP,
Oracle QLA4050C-E-SP, QLA4052C-E-SP, QLE2360-E-SP,
Linux QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
[32-Bit]: QLE4060C-E-SP, QLE4062C-E-SP
5.04, 5.14,
5.24

03/02/2014 31 Information Management Software Array Capabilities


Information Management Software Array Capabilities
11 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Oracle EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300 Linux Copy 02.23
[32-Bit] 4:
U6, U7;
Oracle
Linux
[32-Bit]:
5.04, 5.14,
5.24
12 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c5, Oracle EMC SAN See1
CX3-80/CX3-40(F)/CX3-20(F)5 Linux Copy 03.26
[32-Bit] 4:
U6, U7;
Oracle
Linux
[32-Bit]:
5.04, 5.14,
5.24
13 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c5, Oracle EMC: 250-048-900, Integrated; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F)5 Linux Copy 03.26
[32-Bit] 4: Hewlett Packard AB232A (LP9802);
U6, U7; NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Oracle
Linux Unisys FCH742313-P64 (LP9802)
[32-Bit]:
5.04, 5.14,
5.24
14 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c5, Oracle Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See1
CX3-80/CX3-40(F)/CX3-20(F)5 Linux LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 03.266
[32-Bit] 4: LP9802-E, LP9802DC-E, LP982-E;
U6, U7;
QLogic: QLA2340-E-SP, QLA2342-E-SP
Oracle
Linux
[32-Bit]:
5.04, 5.14,
5.24
15 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c5, Oracle Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See1
CX3-80/CX3-40(F)/CX3-20(F)5 Linux (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 03.26
[32-Bit] 4: (LP8000), Dual-port Fibre Channel Adapter for HP
U6, U7; Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
Oracle 381881-B21, Dual-port Fibre Channel Adapter for HP
Linux Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
[32-Bit]: FCA2214/281541-B21 (QLA2340),
5.04, 5.14, FCA2214DC/321835-B21 (QLA2342), FCA2354
5.24 (LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic QLA2310F-E-SP
16 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, Linux Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X2, 3; [32-Bit] 4:
U4, U5
EMC Celerra: NS-120, NS-480, NS-9607, 8
17 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, Linux LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X2, 3; [32-Bit] 4: LP9802DC-E, LP982-E;
U4, U5
EMC Celerra: NS-120, NS-480, NS-9607, 8 Hewlett Packard: Dual-port Fibre Channel Adapter for
HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
18 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, Linux Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X2, 3; [32-Bit] 4: Hewlett Packard A6826A;
U4, U5, U6, IBM: 00N6881 (QLA2200), 19K1246 (QLA2310);
EMC Celerra: NS-120, NS-480, NS-9607, 8 U7;
QLogic: QLA2200F-EMC, QLE2360-E-SP,
Oracle QLE2362-E-SP
Linux
[32-Bit]:
5.04, 5.14,
5.24
19 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle EMC SAN See1
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, Linux Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X2, 3; [32-Bit] 4:
U6, U7;
EMC Celerra: NS-120, NS-480, NS-9607, 8
Oracle
Linux
[32-Bit]:
5.04, 5.14,
5.24

03/02/2014 32 Information Management Software Array Capabilities


Information Management Software Array Capabilities
20 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, Linux Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X2, 3; [32-Bit] 4: Emulex: LP11000-E, LP11002-E, LP1150-E,
U6, U7; LPe11000-E, LPe11000-E-G, LPe11002-E,
EMC Celerra: NS-120, NS-480, NS-9607, 8 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Oracle
Linux Fujitsu Ltd.: PW008FC2, PW008FC3;
[32-Bit]:
5.04, 5.14, Generic Vendor NIC: 10/100, GbE;
5.24
Hewlett Packard: A6795A, A9782A13, 14, 15, 16, 17, 18,
19, A9784A13, 14, 15, 16, 17, 18, 19, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A9, 10;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4010-E-SP, QLA4010C-E-SP, QLA4050-E-SP,
QLA4050C-E-SP11, 12, QLA4052C-E-SP11, 12,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
21 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See1
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, Linux LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X2, 3; [32-Bit] 4: LP9802-E, LP9802DC-E, LP982-E;
U6, U7;
EMC Celerra: NS-120, NS-480, NS-9607, 8 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
Oracle (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
Linux (LP8000), Dual-port Fibre Channel Adapter for HP
[32-Bit]: Proliant BL20p G2 300874-B21, Dual-port Fibre
5.04, 5.14, Channel Adapter for HP Proliant BL25p/BL45p
5.24 381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
22 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; Linux Copy 04.28
[32-Bit] 4:
EMC Celerra: NS-120, NS-480, NS-9607, 8 U4, U5
23 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; Linux LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.28
[32-Bit] 4: LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9607, 8 U4, U5
Hewlett Packard: Dual-port Fibre Channel Adapter for
HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
24 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; Linux Copy 04.28
[32-Bit] 4: Hewlett Packard A6826A;
EMC Celerra: NS-120, NS-480, NS-9607, 8 U4, U5, U6, IBM: 00N6881 (QLA2200), 19K1246 (QLA2310);
U7;
QLogic: QLA2200F-EMC, QLE2360-E-SP,
Oracle QLE2362-E-SP
Linux
[32-Bit]:
5.04, 5.14,
5.24
25 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle EMC SAN See1
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; Linux Copy 04.28
[32-Bit] 4:
EMC Celerra: NS-120, NS-480, NS-9607, 8 U6, U7;
Oracle
Linux
[32-Bit]:
5.04, 5.14,
5.24
26 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; Linux Copy 04.28
[32-Bit] 4: Emulex: LP11000-E, LP11002-E, LP1150-E,
EMC Celerra: NS-120, NS-480, NS-9607, 8 U6, U7; LPe11000-E, LPe11000-E-G, LPe11002-E,
LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Oracle
Linux Fujitsu Ltd.: PW008FC2, PW008FC3;
[32-Bit]:
5.04, 5.14, Generic Vendor NIC: 10/100, GbE;
5.24
Hewlett Packard: A6795A, A9782A13, 14, 15, 16, 17, 18,
19, A9784A13, 14, 15, 16, 17, 18, 19, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A9, 10;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,

03/02/2014 33 Information Management Software Array Capabilities


Information Management Software Array Capabilities

QLA4010-E-SP, QLA4010C-E-SP, QLA4050-E-SP,


QLA4050C-E-SP11, 12, QLA4052C-E-SP11, 12,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
27 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See1
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; Linux LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.28
[32-Bit] 4: LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9607, 8 U6, U7;
Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
Oracle (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
Linux (LP8000), Dual-port Fibre Channel Adapter for HP
[32-Bit]: Proliant BL20p G2 300874-B21, Dual-port Fibre
5.04, 5.14, Channel Adapter for HP Proliant BL25p/BL45p
5.24 381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
28 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Oracle EMC SAN See1
Linux Copy 02.23
[32-Bit] 4:
U6, U7;
Oracle
Linux
[32-Bit]:
5.04, 5.14,
5.24
29 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Oracle EMC: 250-048-900, Integrated; EMC SAN
Linux Copy 02.23
[32-Bit] 4: Emulex: LP10000ExDC-E, LP1050Ex-E, LP11000-E,
U6, U7; LP11002-E, LP1150-E, LP9002C-E, LPe11000-E,
LPe11000-E-G, LPe11002-E, LPe11002-E-G,
Oracle LPe1150-E, LPe1150-E-G;
Linux
[32-Bit]: Hewlett Packard: A6795A, A6826A, A9782A13, 14, 15, 16,
5.04, 5.14, 17, 18, 19, A9784A13, 14, 15, 16, 17, 18, 19, AB232A
5.24 (LP9802), AB378A, AB379A (QLA2462), AB465A9, 10;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLA4050C-E-SP, QLA4052C-E-SP,
QLE2360-E-SP, QLE2362-E-SP, QLE2460-E-SP,
QLE2462-E-SP, QLE4060C-E-SP, QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
30 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Oracle Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See1
Linux LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.23
[32-Bit] 4: LP9802-E, LP9802DC-E, LP982-E;
U6, U7;
Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
Oracle (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
Linux (LP8000), Dual-port Fibre Channel Adapter for HP
[32-Bit]: Proliant BL20p G2 300874-B21, Dual-port Fibre
5.04, 5.14, Channel Adapter for HP Proliant BL25p/BL45p
5.24 381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
1. Windows 2000 hosts running less than SP4 could be susceptible to data loss during LUN expansion operations. This issue is corrected by Microsoft in SP4, or by applying hotfix
327020. See EMC Solution IS emc73538 and Microsoft Knowledge Base article 327020 for more information.
2. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
3. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.
4. When the Red Hat stock kernel is used under Oracle Linux, use the RHEL equivalent for supported configurations except EMC PowerPath 5.7 and higher. EMC PowerPath 5.7 and
higher is not supported. Please refer to Primus emc310005 for additional detail.
5. CLARiiON CX3-40c/CX3-20c requires minimum revision 03.22.xxx.5.50x.
6. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
7. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.

03/02/2014 34 Information Management Software Array Capabilities


Information Management Software Array Capabilities
8. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
9. The AB465A 2port/2Gig fibre channel/GigE combo card only qualified fibre channel port at this time.
10. The AB465A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
11. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator.
12. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator. Refer to the EMC Host Connectivity guide for additional information on Windows iSCSI components and the Microsoft iSCSI Software Initiator usage.
13. FC-AL, FC-SW topologies can co-exist on the same server but not on same HBA, provided that different topologies are attached to different HBAs; with the exception of the dual port
A6826A with one port FC-AL and the other port FC-SW.
14. Auto-sensing capability on the HBA is permanently enabled. There is no option to disable auto-sensing on the HBA.
15. The A9782A/A9784A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
16. The A9782A/A9784A fibre channel/GigE combo card only port qualified is fibre channel at this time.
17. The A9782A/A9784A HBA is capable of supporting both 1 and 2 Gb speeds.
18. The A9782A/A9784A the adapter operates in PCI 33 Mhz/66 Mhz and PCI-X 66 Mhz/100Mhz/133Mhz bus speeds with a 64-bit bus width
19. A6826A/A9784A/A9782A hbas: host must be configured as a 64Bit operating system.

Oracle Linux [x86_64]


Oracle Linux [x86_64]
Information
Operating Management
No. Storage Array System Host Bus Adapter Software Comments
1 Oracle EMC SAN See4
Linux Copy 02.26
[x86_64] 4:
U6, U7;
Oracle
Linux
[x86_64]:
5.02, 5.12,
5.22
2 Oracle EMC SAN
Linux Copy: 02.23,
[x86_64] 4: 03.26
U6, U7;
Oracle
Linux
[x86_64]:
5.02, 5.12,
5.22
3 Oracle EMC: 250-048-900, Integrated; EMC SAN
Linux Copy 02.26
[x86_64] 4: Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E;
U6, U7;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Oracle
Linux Hewlett Packard: A6795A, A6826A, A9782A13, 14, 15,
[x86_64]: 16, 17, 18, 19, A9784A13, 14, 15, 16, 17, 18, 19, AB232A
5.02, 5.12, (LP9802), AB378A, AB379A (QLA2462), AB465A9, 10;
5.22
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
4 Oracle Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See4
Linux LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.261
[x86_64] 4: LP9802-E, LP9802DC-E, LP982-E;
U6, U7;
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
Oracle QLA2342-E-SP
Linux
[x86_64]:
5.02, 5.12,
5.22
5 Oracle Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
Linux LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 02.261
[x86_64] 4: LPe11002-E-G, LPe1150-E, LPe1150-E-G;
U6, U7;
QLogic: QLA2200F-EMC, QLA2460-E-SP,
Oracle QLA2462-E-SP, QLE2360-E-SP, QLE2362-E-SP,
Linux QLE2460-E-SP, QLE2462-E-SP
[x86_64]:
5.02, 5.12,
5.22
6 Oracle Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See4
Linux (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 02.26
[x86_64] 4: (LP8000), Dual-port Fibre Channel Adapter for HP
U6, U7; Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
Oracle 381881-B21, Dual-port Fibre Channel Adapter for HP
Linux Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
[x86_64]: FCA2214/281541-B21 (QLA2340),
5.02, 5.12, FCA2214DC/321835-B21 (QLA2342), FCA2354
5.22 (LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F)
7 EMC CLARiiON: AX4-5, CX3-10c, CX3-40c/CX3-20c, Oracle EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300; Linux Copy 02.26
[x86_64] 4:
EMC Celerra NX4 (FC) U6, U7;
Oracle
Linux
[x86_64]:
5.02, 5.12,
5.22

03/02/2014 35 Information Management Software Array Capabilities


Information Management Software Array Capabilities
8 EMC CLARiiON: AX4-5, CX300; Oracle EMC SAN
Linux Copy 03.26
EMC Celerra NX4 (FC) [x86_64] 4:
U6, U7;
Oracle
Linux
[x86_64]:
5.02, 5.12,
5.22
9 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Oracle Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) Linux Copy 03.26
[x86_64] 4: Hewlett Packard: A6795A, A6826A, A9782A13, 14, 15,
U6, U7; 16, 17, 18, 19, A9784A13, 14, 15, 16, 17, 18, 19, AB378A,
AB379A (QLA2462), AB465A9, 10;
Oracle
Linux IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
[x86_64]: (QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
5.02, 5.12, 6239;
5.22
QLogic QLA2200F-EMC
10 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Oracle Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) Linux LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 03.261
[x86_64] 4: LPe11002-E-G, LPe1150-E, LPe1150-E-G;
U6, U7;
QLogic: QLA2460-E-SP, QLA2462-E-SP,
Oracle QLA4050C-E-SP, QLA4052C-E-SP, QLE2360-E-SP,
Linux QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
[x86_64]: QLE4060C-E-SP, QLE4062C-E-SP
5.02, 5.12,
5.22
11 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Oracle EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300 Linux Copy 02.23
[x86_64] 4:
U6, U7;
Oracle
Linux
[x86_64]:
5.02, 5.12,
5.22
12 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c3, Oracle EMC SAN See4
CX3-80/CX3-40(F)/CX3-20(F)3 Linux Copy 03.26
[x86_64] 4:
U6, U7;
Oracle
Linux
[x86_64]:
5.02, 5.12,
5.22
13 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c3, Oracle EMC: 250-048-900, Integrated; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F)3 Linux Copy 03.26
[x86_64] 4: Hewlett Packard AB232A (LP9802);
U6, U7; NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Oracle
Linux Unisys FCH742313-P64 (LP9802)
[x86_64]:
5.02, 5.12,
5.22
14 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c3, Oracle Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See4
CX3-80/CX3-40(F)/CX3-20(F)3 Linux LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 03.261
[x86_64] 4: LP9802-E, LP9802DC-E, LP982-E;
U6, U7;
QLogic: QLA2340-E-SP, QLA2342-E-SP
Oracle
Linux
[x86_64]:
5.02, 5.12,
5.22
15 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c3, Oracle Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See4
CX3-80/CX3-40(F)/CX3-20(F)3 Linux (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 03.26
[x86_64] 4: (LP8000), Dual-port Fibre Channel Adapter for HP
U6, U7; Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
Oracle 381881-B21, Dual-port Fibre Channel Adapter for HP
Linux Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
[x86_64]: FCA2214/281541-B21 (QLA2340),
5.02, 5.12, FCA2214DC/321835-B21 (QLA2342), FCA2354
5.22 (LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic QLA2310F-E-SP
16 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, Linux Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X5, 6; [x86_64] 4:
U4, U5
EMC Celerra: NS-120, NS-480, NS-9607, 8
17 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, Linux LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X5, 6; [x86_64] 4: LP9802DC-E, LP982-E;
U4, U5
EMC Celerra: NS-120, NS-480, NS-9607, 8 Hewlett Packard: Dual-port Fibre Channel Adapter for
HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP

03/02/2014 36 Information Management Software Array Capabilities


Information Management Software Array Capabilities
18 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, Linux Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X5, 6; [x86_64] 4: Hewlett Packard A6826A;
U4, U5, U6, IBM: 00N6881 (QLA2200), 19K1246 (QLA2310);
EMC Celerra: NS-120, NS-480, NS-9607, 8 U7;
QLogic: QLA2200F-EMC, QLE2360-E-SP,
Oracle QLE2362-E-SP
Linux
[x86_64]:
5.02, 5.12,
5.22
19 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle EMC SAN See4
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, Linux Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X5, 6; [x86_64] 4:
U6, U7;
EMC Celerra: NS-120, NS-480, NS-9607, 8
Oracle
Linux
[x86_64]:
5.02, 5.12,
5.22
20 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, Linux Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X5, 6; [x86_64] 4: Emulex: LP11000-E, LP11002-E, LP1150-E,
U6, U7; LPe11000-E, LPe11000-E-G, LPe11002-E,
EMC Celerra: NS-120, NS-480, NS-9607, 8 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Oracle
Linux Fujitsu Ltd.: PW008FC2, PW008FC3;
[x86_64]:
5.02, 5.12, Generic Vendor NIC: 10/100, GbE;
5.22
Hewlett Packard: A6795A, A9782A13, 14, 15, 16, 17, 18,
19, A9784A13, 14, 15, 16, 17, 18, 19, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A9, 10;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4010-E-SP, QLA4010C-E-SP, QLA4050-E-SP,
QLA4050C-E-SP11, 12, QLA4052C-E-SP11, 12,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
21 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See4
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, Linux LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X5, 6; [x86_64] 4: LP9802-E, LP9802DC-E, LP982-E;
U6, U7;
EMC Celerra: NS-120, NS-480, NS-9607, 8 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
Oracle (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
Linux (LP8000), Dual-port Fibre Channel Adapter for HP
[x86_64]: Proliant BL20p G2 300874-B21, Dual-port Fibre
5.02, 5.12, Channel Adapter for HP Proliant BL25p/BL45p
5.22 381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
22 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; Linux Copy 04.28
[x86_64] 4:
EMC Celerra: NS-120, NS-480, NS-9607, 8 U4, U5
23 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; Linux LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.28
[x86_64] 4: LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9607, 8 U4, U5
Hewlett Packard: Dual-port Fibre Channel Adapter for
HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
24 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; Linux Copy 04.28
[x86_64] 4: Hewlett Packard A6826A;
EMC Celerra: NS-120, NS-480, NS-9607, 8 U4, U5, U6, IBM: 00N6881 (QLA2200), 19K1246 (QLA2310);
U7;
QLogic: QLA2200F-EMC, QLE2360-E-SP,
Oracle QLE2362-E-SP
Linux
[x86_64]:
5.02, 5.12,
5.22

03/02/2014 37 Information Management Software Array Capabilities


Information Management Software Array Capabilities
25 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle EMC SAN See4
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; Linux Copy 04.28
[x86_64] 4:
EMC Celerra: NS-120, NS-480, NS-9607, 8 U6, U7;
Oracle
Linux
[x86_64]:
5.02, 5.12,
5.22
26 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; Linux Copy 04.28
[x86_64] 4: Emulex: LP11000-E, LP11002-E, LP1150-E,
EMC Celerra: NS-120, NS-480, NS-9607, 8 U6, U7; LPe11000-E, LPe11000-E-G, LPe11002-E,
LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Oracle
Linux Fujitsu Ltd.: PW008FC2, PW008FC3;
[x86_64]:
5.02, 5.12, Generic Vendor NIC: 10/100, GbE;
5.22
Hewlett Packard: A6795A, A9782A13, 14, 15, 16, 17, 18,
19, A9784A13, 14, 15, 16, 17, 18, 19, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A9, 10;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4010-E-SP, QLA4010C-E-SP, QLA4050-E-SP,
QLA4050C-E-SP11, 12, QLA4052C-E-SP11, 12,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
27 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See4
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; Linux LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.28
[x86_64] 4: LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9607, 8 U6, U7;
Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
Oracle (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
Linux (LP8000), Dual-port Fibre Channel Adapter for HP
[x86_64]: Proliant BL20p G2 300874-B21, Dual-port Fibre
5.02, 5.12, Channel Adapter for HP Proliant BL25p/BL45p
5.22 381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
28 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Oracle EMC SAN See4
Linux Copy 02.23
[x86_64] 4:
U6, U7;
Oracle
Linux
[x86_64]:
5.02, 5.12,
5.22
29 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Oracle EMC: 250-048-900, Integrated; EMC SAN
Linux Copy 02.23
[x86_64] 4: Emulex: LP10000ExDC-E, LP1050Ex-E, LP11000-E,
U6, U7; LP11002-E, LP1150-E, LP9002C-E, LPe11000-E,
LPe11000-E-G, LPe11002-E, LPe11002-E-G,
Oracle LPe1150-E, LPe1150-E-G;
Linux
[x86_64]: Hewlett Packard: A6795A, A6826A, A9782A13, 14, 15,
5.02, 5.12, 16, 17, 18, 19, A9784A13, 14, 15, 16, 17, 18, 19, AB232A
5.22 (LP9802), AB378A, AB379A (QLA2462), AB465A9, 10;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLA4050C-E-SP, QLA4052C-E-SP,
QLE2360-E-SP, QLE2362-E-SP, QLE2460-E-SP,
QLE2462-E-SP, QLE4060C-E-SP, QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
30 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Oracle Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See4
Linux LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.23
[x86_64] 4: LP9802-E, LP9802DC-E, LP982-E;
U6, U7;
Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
Oracle (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
Linux (LP8000), Dual-port Fibre Channel Adapter for HP
[x86_64]: Proliant BL20p G2 300874-B21, Dual-port Fibre
5.02, 5.12, Channel Adapter for HP Proliant BL25p/BL45p
5.22 381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;

03/02/2014 38 Information Management Software Array Capabilities


Information Management Software Array Capabilities

IBM: 24P0960 (QLA2340), HS20 FC Exp Card


(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
1. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
2. When the Red Hat stock kernel is used under Oracle Linux, use the RHEL equivalent for supported configurations except EMC PowerPath 5.7 and higher. EMC PowerPath 5.7 and
higher is not supported. Please refer to Primus emc310005 for additional detail.
3. CLARiiON CX3-40c/CX3-20c requires minimum revision 03.22.xxx.5.50x.
4. Windows 2000 hosts running less than SP4 could be susceptible to data loss during LUN expansion operations. This issue is corrected by Microsoft in SP4, or by applying hotfix
327020. See EMC Solution IS emc73538 and Microsoft Knowledge Base article 327020 for more information.
5. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
6. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.
7. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
8. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
9. The AB465A 2port/2Gig fibre channel/GigE combo card only qualified fibre channel port at this time.
10. The AB465A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
11. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator.
12. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator. Refer to the EMC Host Connectivity guide for additional information on Windows iSCSI components and the Microsoft iSCSI Software Initiator usage.
13. FC-AL, FC-SW topologies can co-exist on the same server but not on same HBA, provided that different topologies are attached to different HBAs; with the exception of the dual port
A6826A with one port FC-AL and the other port FC-SW.
14. Auto-sensing capability on the HBA is permanently enabled. There is no option to disable auto-sensing on the HBA.
15. The A9782A/A9784A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
16. The A9782A/A9784A fibre channel/GigE combo card only port qualified is fibre channel at this time.
17. The A9782A/A9784A HBA is capable of supporting both 1 and 2 Gb speeds.
18. The A9782A/A9784A the adapter operates in PCI 33 Mhz/66 Mhz and PCI-X 66 Mhz/100Mhz/133Mhz bus speeds with a 64-bit bus width
19. A6826A/A9784A/A9782A hbas: host must be configured as a 64Bit operating system.

Oracle Solaris
Oracle Solaris
Information
No. Storage Array Operating System Management Software
1 Oracle Solaris 10 x863, 4 EMC SAN Copy 03.24
2 Oracle Solaris: 10 EMC SAN Copy 02.26
SPARC5, 9 SPARC9
3 EMC CLARiiON CX300 Oracle Solaris 10 x863, 4 EMC SAN Copy 03.24
4 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, CX3-80/CX3-40(F)/CX3-20(F); Oracle Solaris 10: EMC SAN Copy 03.26
SPARC5, x863, 4;
EMC Celerra: NS20FC6, NS80FC10
Oracle Solaris 9 SPARC9
5 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, Oracle Solaris 10: EMC SAN Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X1, 2; SPARC5, x863, 4;
EMC Celerra: NS-120, NS-480, NS-9607, 8 Oracle Solaris 9 SPARC9
6 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; Oracle Solaris 10: EMC SAN Copy 04.28
SPARC5, x863, 4;
EMC Celerra: NS-120, NS-480, NS-9607, 8
Oracle Solaris 9 SPARC9
7 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Oracle Solaris 10: EMC SAN Copy 02.23
SPARC5, x863, 4;
Oracle Solaris 9 SPARC9
1. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
2. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.
3. EMC supports ZFS in Solaris 10_x86 11/06 (update 3) or later. The Snapshot and Clone features of ZFS are supported only through Sun Microsystems.
4. EMC recommends as a best practice that customers upgrade to the most recent Solaris 10 x86 patch bundle released on the Oracle website:http://support.oracle.com
5. EMC recommends as a best practice that customers upgrade to the most recent Solaris 10 SPARC patch bundle released on the Oracle website:http://support.oracle.com
6. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
7. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
8. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
9. EMC recommends as a best practice that customers upgrade to the most recent Solaris 9 SPARC patch bundle released on the Oracle website:http://support.oracle.com
10. NS80FC has equivalent array attributes to CX3-80

Red Hat RHEL [32-Bit]


Red Hat RHEL [32-Bit]
Information
Operating Management
No. Storage Array System Host Bus Adapter Software Comments
1 Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
[32-Bit] 3.0: U7 LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 02.26
AS/ES5, U8 LP9802DC-E, LP982-E;
AS/ES5;
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
Red Hat RHEL QLA2342-E-SP, QLE2360-E-SP, QLE2362-E-SP
[32-Bit] 4.0:
AS/ES, U1
AS/ES, U3
AS/ES, U4
AS/ES

03/02/2014 39 Information Management Software Array Capabilities


Information Management Software Array Capabilities
2 Red Hat RHEL EMC SAN
[32-Bit] 3.0: U7 Copy 02.26
AS/ES5, U8
AS/ES5;
Red Hat RHEL
[32-Bit] 4.0: U2
AS/ES, U3
AS/ES, U4
AS/ES
3 Red Hat RHEL Hewlett Packard: Dual-port Fibre Channel Adapter EMC SAN
[32-Bit] 3.0: U7 for HP Proliant BL25p/BL45p 381881-B21, Copy 02.26
AS/ES5, U8 FCA2214/281541-B21 (QLA2340),
AS/ES5; FCA2214DC/321835-B21 (QLA2342);
Red Hat RHEL IBM: 24P0960 (QLA2340), HS20 FC Exp Card
[32-Bit] 4.0: U3 (13N2203/26R0836);
AS/ES, U4
AS/ES QLogic QLA2200F-EMC
4 Red Hat RHEL Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E EMC SAN
[32-Bit] 3.0: U7 Copy 02.26
AS/ES5, U8
AS/ES5;
Red Hat RHEL
[32-Bit]: 3.9
AS/ES5, 4.0
AS/ES, 4.0 U1
AS/ES, 4.0 U3
AS/ES, 4.0 U4
AS/ES, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0, 5.1,
5.2
5 Red Hat RHEL Hewlett Packard A6826A; EMC SAN
[32-Bit] 3.0: U7 IBM: 00N6881 (QLA2200), 19K1246 (QLA2310) Copy 02.26
AS/ES5, U8
AS/ES5;
Red Hat RHEL
[32-Bit]: 3.9
AS/ES5, 4.0 U3
AS/ES, 4.0 U4
AS/ES, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0, 5.1,
5.2
6 Red Hat RHEL EMC SAN See2
[32-Bit]: 3.9 Copy 02.26
AS/ES5, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0, 5.1,
5.2
7 Red Hat RHEL EMC SAN
[32-Bit]: 3.9 Copy: 02.23,
AS/ES5, 4.5 03.26
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0, 5.1,
5.2
8 Red Hat RHEL EMC: 250-048-900, Integrated; EMC SAN
[32-Bit]: 3.9 Copy 02.26
AS/ES5, 4.5 Fujitsu Ltd.: PW008FC2, PW008FC3;
AS/ES, 4.6
AS/ES, 4.7 Hewlett Packard: A6795A, A9782A13, 14, 15, 16, 17,
AS/ES, 5.0, 5.1, 18, 19, A9784A13, 14, 15, 16, 17, 18, 19, AB232A
5.2 (LP9802), AB378A, AB379A (QLA2462), AB465A11,
12;

IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773,


5774, 6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
9 Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See2
[32-Bit]: 3.9 LP1050DC-E, LP8000-EMC, LP9002-E Copy 02.2610
AS/ES5, 4.5 (LP9002L-E), LP9802-E, LP9802DC-E, LP982-E;
AS/ES, 4.6
AS/ES, 4.7 QLogic: QLA2310F-E-SP, QLA2340-E-SP,
AS/ES, 5.0, 5.1, QLA2342-E-SP
5.2
10 Red Hat RHEL Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
[32-Bit]: 3.9 LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 02.2610
AS/ES5, 4.5 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
AS/ES, 4.6
AS/ES, 4.7 QLogic: QLA2200F-EMC, QLA2460-E-SP,
AS/ES, 5.0, 5.1, QLA2462-E-SP, QLE2360-E-SP, QLE2362-E-SP,
5.2 QLE2460-E-SP, QLE2462-E-SP
11 Red Hat RHEL Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See2
[32-Bit]: 3.9 (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 02.26
AS/ES5, 4.5 (LP8000), Dual-port Fibre Channel Adapter for HP
AS/ES, 4.6 Proliant BL20p G2 300874-B21, Dual-port Fibre
AS/ES, 4.7 Channel Adapter for HP Proliant BL25p/BL45p
AS/ES, 5.0, 5.1, 381881-B21, Dual-port Fibre Channel Adapter for
5.2 HP Proliant BL30p/BL35p 354054-B21, FCA2101
(LP952), FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384
(LP9802), FCA2404 (LP9802), FCA2404DC
(LP9802DC), FCA2408 (LP982), HP QLogic-based
Fibre Channel Mezzanine HBA for BL20p G3/BL20p
G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);

03/02/2014 40 Information Management Software Array Capabilities


Information Management Software Array Capabilities

NEC: N8103-200 (LP850), N8190-105 (LP952),


N8503-200 (LP850), N8803-031 (QLA2310F)
12 EMC CLARiiON: AX4-5, CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300; [32-Bit]: 3.9 Copy 02.26
AS/ES5, 4.5
EMC Celerra NX4 (FC) AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0, 5.1,
5.2
13 EMC CLARiiON: AX4-5, CX300; Red Hat RHEL EMC SAN
[32-Bit]: 3.9 Copy 03.26
EMC Celerra NX4 (FC) AS/ES5, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0, 5.1,
5.2
14 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL QLogic: QLA4050C-E-SP, QLA4052C-E-SP, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [32-Bit]: 3.9 QLE4060C-E-SP, QLE4062C-E-SP Copy 03.2610
AS/ES5, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0, 5.1,
5.2
15 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL Emulex: LP10000ExDC-E, LP1050Ex-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [32-Bit]: 3.9 LP9002C-E; Copy 03.26
AS/ES5, 5.2
Hewlett Packard: A6795A, A6826A, A9782A13, 14,
15, 16, 17, 18, 19, A9784A13, 14, 15, 16, 17, 18, 19,
AB378A, AB379A (QLA2462), AB465A11, 12;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977,
19K1246 (QLA2310), 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
QLogic QLA2200F-EMC
16 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [32-Bit]: 3.9 LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 03.2610
AS/ES5, 5.2 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLE2360-E-SP, QLE2362-E-SP, QLE2460-E-SP,
QLE2462-E-SP
17 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300 [32-Bit]: 3.9 Copy 02.23
AS/ES5, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0, 5.1,
5.2
18 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [32-Bit] 3.0: U7 LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 03.26
AS/ES5, U8 LP9802DC-E, LP982-E;
EMC Celerra: NS20FC21, NS80FC1 AS/ES5;
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
Red Hat RHEL QLA2342-E-SP, QLE2360-E-SP, QLE2362-E-SP
[32-Bit] 4.0:
AS/ES, U1
AS/ES, U3
AS/ES, U4
AS/ES
19 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [32-Bit] 3.0: U7 Copy 03.26
AS/ES5, U8
EMC Celerra: NS20FC21, NS80FC1 AS/ES5;
Red Hat RHEL
[32-Bit] 4.0:
AS/ES, U1
AS/ES, U3
AS/ES, U4
AS/ES;
Red Hat RHEL
[32-Bit]: 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0, 5.1
20 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [32-Bit] 3.0: U7 Copy 03.26
AS/ES5, U8
EMC Celerra: NS20FC21, NS80FC1 AS/ES5;
Red Hat RHEL
[32-Bit] 4.0: U2
AS/ES, U3
AS/ES, U4
AS/ES
21 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL Hewlett Packard: Dual-port Fibre Channel Adapter EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [32-Bit] 3.0: U7 for HP Proliant BL25p/BL45p 381881-B21, Copy 03.26
AS/ES5, U8 FCA2214/281541-B21 (QLA2340),
EMC Celerra: NS20FC21, NS80FC1 AS/ES5; FCA2214DC/321835-B21 (QLA2342);
Red Hat RHEL IBM: 24P0960 (QLA2340), HS20 FC Exp Card
[32-Bit] 4.0: U3 (13N2203/26R0836)
AS/ES, U4
AS/ES
22 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL Hewlett Packard A6826A; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [32-Bit] 3.0: U7 IBM: 00N6881 (QLA2200), 19K1246 (QLA2310); Copy 03.26
AS/ES5, U8
EMC Celerra: NS20FC21, NS80FC1 AS/ES5; QLogic QLA2200F-EMC
Red Hat RHEL
[32-Bit] 4.0: U3
AS/ES, U4
AS/ES;
Red Hat RHEL
[32-Bit]: 4.5
AS/ES, 4.6

03/02/2014 41 Information Management Software Array Capabilities


Information Management Software Array Capabilities

AS/ES, 4.7
AS/ES, 5.0, 5.1
23 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [32-Bit]: 4.5 LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 03.2610
AS/ES, 4.6 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
EMC Celerra: NS20FC21, NS80FC1 AS/ES, 4.7
AS/ES, 5.0, 5.1 QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLE2360-E-SP, QLE2362-E-SP, QLE2460-E-SP,
QLE2462-E-SP
24 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL Hewlett Packard: A6795A, A9782A13, 14, 15, 16, 17, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [32-Bit]: 4.5 18, 19, A9784A13, 14, 15, 16, 17, 18, 19, AB378A, Copy 03.26
AS/ES, 4.6 AB379A (QLA2462), AB465A11, 12;
EMC Celerra: NS20FC21, NS80FC1 AS/ES, 4.7
AS/ES, 5.0, 5.1 IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773,
5774, 6227, 6228, 6239
25 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c20, Red Hat RHEL EMC SAN See2
CX3-80/CX3-40(F)/CX3-20(F)20 [32-Bit]: 3.9 Copy 03.26
AS/ES5, 5.2
26 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c20, Red Hat RHEL EMC: 250-048-900, Integrated; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F)20 [32-Bit]: 3.9 Copy 03.26
AS/ES5, 5.2 Hewlett Packard AB232A (LP9802);
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
27 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c20, Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See2
CX3-80/CX3-40(F)/CX3-20(F)20 [32-Bit]: 3.9 LP1050DC-E, LP8000-EMC, LP9002-E Copy 03.2610
AS/ES5, 5.2 (LP9002L-E), LP9802-E, LP9802DC-E, LP982-E;
QLogic: QLA2340-E-SP, QLA2342-E-SP
28 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c20, Red Hat RHEL Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See2
CX3-80/CX3-40(F)/CX3-20(F)20 [32-Bit]: 3.9 (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 03.26
AS/ES5, 5.2 (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for
HP Proliant BL30p/BL35p 354054-B21, FCA2101
(LP952), FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384
(LP9802), FCA2404 (LP9802), FCA2404DC
(LP9802DC), FCA2408 (LP982), HP QLogic-based
Fibre Channel Mezzanine HBA for BL20p G3/BL20p
G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic QLA2310F-E-SP
29 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c20, Red Hat RHEL EMC SAN See2
CX3-80/CX3-40(F)/CX3-20(F)20; [32-Bit]: 4.5 Copy 03.26
AS/ES, 4.6
EMC Celerra: NS20FC21, NS80FC1 AS/ES, 4.7
AS/ES, 5.0, 5.1
30 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c20, Red Hat RHEL EMC: 250-048-900, Integrated; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F)20; [32-Bit]: 4.5 Copy 03.26
AS/ES, 4.6 Hewlett Packard AB232A (LP9802);
EMC Celerra: NS20FC21, NS80FC1 AS/ES, 4.7 NEC: NT2010A-A001 (QLA2340), NTAB232A
AS/ES, 5.0, 5.1 (LP9802);
Unisys FCH742313-P64 (LP9802)
31 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c20, Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See2
CX3-80/CX3-40(F)/CX3-20(F)20; [32-Bit]: 4.5 LP1050DC-E, LP8000-EMC, LP9002-E Copy 03.2610
AS/ES, 4.6 (LP9002L-E), LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS20FC21, NS80FC1 AS/ES, 4.7
AS/ES, 5.0, 5.1 QLogic: QLA2340-E-SP, QLA2342-E-SP
32 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c20, Red Hat RHEL Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See2
CX3-80/CX3-40(F)/CX3-20(F)20; [32-Bit]: 4.5 (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 03.26
AS/ES, 4.6 (LP8000), Dual-port Fibre Channel Adapter for HP
EMC Celerra: NS20FC21, NS80FC1 AS/ES, 4.7 Proliant BL20p G2 300874-B21, Dual-port Fibre
AS/ES, 5.0, 5.1 Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for
HP Proliant BL30p/BL35p 354054-B21, FCA2101
(LP952), FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384
(LP9802), FCA2404 (LP9802), FCA2404DC
(LP9802DC), FCA2408 (LP982), HP QLogic-based
Fibre Channel Mezzanine HBA for BL20p G3/BL20p
G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic QLA2310F-E-SP
33 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [32-Bit] 3.0: U7 LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; AS/ES5, U8 LP9802DC-E, LP982-E;
AS/ES5;
EMC Celerra: NS-120, NS-480, NS-9603, 4 QLogic: QLA2310F-E-SP, QLA2340-E-SP,
Red Hat RHEL QLA2342-E-SP
[32-Bit] 4.0:
AS/ES, U1
AS/ES, U3
AS/ES, U4
AS/ES

03/02/2014 42 Information Management Software Array Capabilities


Information Management Software Array Capabilities
34 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [32-Bit] 3.0: U7 Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; AS/ES5, U8
AS/ES5;
EMC Celerra: NS-120, NS-480, NS-9603, 4
Red Hat RHEL
[32-Bit] 4.0: U2
AS/ES, U3
AS/ES, U4
AS/ES
35 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL Hewlett Packard: Dual-port Fibre Channel Adapter EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [32-Bit] 3.0: U7 for HP Proliant BL25p/BL45p 381881-B21, Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; AS/ES5, U8 FCA2214/281541-B21 (QLA2340),
AS/ES5; FCA2214DC/321835-B21 (QLA2342);
EMC Celerra: NS-120, NS-480, NS-9603, 4
Red Hat RHEL IBM: 24P0960 (QLA2340), HS20 FC Exp Card
[32-Bit] 4.0: U3 (13N2203/26R0836)
AS/ES, U4
AS/ES
36 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL Emulex: LP10000ExDC-E, LP1050Ex-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [32-Bit] 3.0: U7 LP9002C-E; Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; AS/ES5, U8
AS/ES5; QLogic: QLE2360-E-SP, QLE2362-E-SP
EMC Celerra: NS-120, NS-480, NS-9603, 4
Red Hat RHEL
[32-Bit]: 3.9
AS/ES5, 4.0
AS/ES, 4.0 U1
AS/ES, 4.0 U3
AS/ES, 4.0 U4
AS/ES, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0, 5.1,
5.2
37 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL Hewlett Packard A6826A; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [32-Bit] 3.0: U7 IBM: 00N6881 (QLA2200), 19K1246 (QLA2310); Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; AS/ES5, U8
AS/ES5; QLogic QLA2200F-EMC
EMC Celerra: NS-120, NS-480, NS-9603, 4
Red Hat RHEL
[32-Bit]: 3.9
AS/ES5, 4.0 U3
AS/ES, 4.0 U4
AS/ES, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0, 5.1,
5.2
38 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL EMC SAN See2
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [32-Bit]: 3.9 Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; AS/ES5, 4.5
AS/ES, 4.6
EMC Celerra: NS-120, NS-480, NS-9603, 4 AS/ES, 4.7
AS/ES, 5.0, 5.1,
5.2
39 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [32-Bit]: 3.9 Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; AS/ES5, 4.5 Emulex: LP11000-E, LP11002-E, LP1150-E,
AS/ES, 4.6 LPe11000-E, LPe11000-E-G, LPe11002-E,
EMC Celerra: NS-120, NS-480, NS-9603, 4 AS/ES, 4.7 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
AS/ES, 5.0, 5.1,
5.2 Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A9782A13, 14, 15, 16, 17,
18, 19, A9784A13, 14, 15, 16, 17, 18, 19, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A11,
12;

IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773,


5774, 6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4010-E-SP, QLA4010C-E-SP, QLA4050-E-SP,
QLA4050C-E-SP8, 9, QLA4052C-E-SP8, 9,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
40 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See2
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [32-Bit]: 3.9 LP1050DC-E, LP8000-EMC, LP9002-E Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; AS/ES5, 4.5 (LP9002L-E), LP9802-E, LP9802DC-E, LP982-E;
AS/ES, 4.6
EMC Celerra: NS-120, NS-480, NS-9603, 4 AS/ES, 4.7 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
AS/ES, 5.0, 5.1, (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
5.2 (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for
HP Proliant BL30p/BL35p 354054-B21, FCA2101
(LP952), FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384
(LP9802), FCA2404 (LP9802), FCA2404DC
(LP9802DC), FCA2408 (LP982), HP QLogic-based
Fibre Channel Mezzanine HBA for BL20p G3/BL20p
G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP

03/02/2014 43 Information Management Software Array Capabilities


Information Management Software Array Capabilities
41 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [32-Bit] 3.0: U7 LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.28
AS/ES5, U8 LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9603, 4 AS/ES5;
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
Red Hat RHEL QLA2342-E-SP
[32-Bit] 4.0:
AS/ES, U1
AS/ES, U3
AS/ES, U4
AS/ES
42 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [32-Bit] 3.0: U7 Copy 04.28
AS/ES5, U8
EMC Celerra: NS-120, NS-480, NS-9603, 4 AS/ES5;
Red Hat RHEL
[32-Bit] 4.0: U2
AS/ES, U3
AS/ES, U4
AS/ES
43 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL Hewlett Packard: Dual-port Fibre Channel Adapter EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [32-Bit] 3.0: U7 for HP Proliant BL25p/BL45p 381881-B21, Copy 04.28
AS/ES5, U8 FCA2214/281541-B21 (QLA2340),
EMC Celerra: NS-120, NS-480, NS-9603, 4 AS/ES5; FCA2214DC/321835-B21 (QLA2342);
Red Hat RHEL IBM: 24P0960 (QLA2340), HS20 FC Exp Card
[32-Bit] 4.0: U3 (13N2203/26R0836)
AS/ES, U4
AS/ES
44 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL Emulex: LP10000ExDC-E, LP1050Ex-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [32-Bit] 3.0: U7 LP9002C-E; Copy 04.28
AS/ES5, U8
EMC Celerra: NS-120, NS-480, NS-9603, 4 AS/ES5; QLogic: QLE2360-E-SP, QLE2362-E-SP
Red Hat RHEL
[32-Bit]: 3.9
AS/ES5, 4.0
AS/ES, 4.0 U1
AS/ES, 4.0 U3
AS/ES, 4.0 U4
AS/ES, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0, 5.1,
5.2
45 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL Hewlett Packard A6826A; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [32-Bit] 3.0: U7 IBM: 00N6881 (QLA2200), 19K1246 (QLA2310); Copy 04.28
AS/ES5, U8
EMC Celerra: NS-120, NS-480, NS-9603, 4 AS/ES5; QLogic QLA2200F-EMC
Red Hat RHEL
[32-Bit]: 3.9
AS/ES5, 4.0 U3
AS/ES, 4.0 U4
AS/ES, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0, 5.1,
5.2
46 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL EMC SAN See2
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [32-Bit]: 3.9 Copy 04.28
AS/ES5, 4.5
EMC Celerra: NS-120, NS-480, NS-9603, 4 AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0, 5.1,
5.2
47 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [32-Bit]: 3.9 Copy 04.28
AS/ES5, 4.5 Emulex: LP11000-E, LP11002-E, LP1150-E,
EMC Celerra: NS-120, NS-480, NS-9603, 4 AS/ES, 4.6 LPe11000-E, LPe11000-E-G, LPe11002-E,
AS/ES, 4.7 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
AS/ES, 5.0, 5.1,
5.2 Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A9782A13, 14, 15, 16, 17,
18, 19, A9784A13, 14, 15, 16, 17, 18, 19, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A11,
12;

IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773,


5774, 6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4010-E-SP, QLA4010C-E-SP, QLA4050-E-SP,
QLA4050C-E-SP8, 9, QLA4052C-E-SP8, 9,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
48 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See2
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [32-Bit]: 3.9 LP1050DC-E, LP8000-EMC, LP9002-E Copy 04.28
AS/ES5, 4.5 (LP9002L-E), LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9603, 4 AS/ES, 4.6
AS/ES, 4.7 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
AS/ES, 5.0, 5.1, (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
5.2 (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for
HP Proliant BL30p/BL35p 354054-B21, FCA2101
(LP952), FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384
(LP9802), FCA2404 (LP9802), FCA2404DC
(LP9802DC), FCA2408 (LP982), HP QLogic-based
Fibre Channel Mezzanine HBA for BL20p G3/BL20p

03/02/2014 44 Information Management Software Array Capabilities


Information Management Software Array Capabilities

G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
49 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
[32-Bit] 3.0: U7 LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 02.23
AS/ES5, U8 LP9802DC-E, LP982-E;
AS/ES5;
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
Red Hat RHEL QLA2342-E-SP
[32-Bit] 4.0:
AS/ES, U1
AS/ES, U3
AS/ES, U4
AS/ES
50 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat RHEL EMC SAN
[32-Bit] 3.0: U7 Copy 02.23
AS/ES5, U8
AS/ES5;
Red Hat RHEL
[32-Bit] 4.0: U2
AS/ES, U3
AS/ES, U4
AS/ES
51 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat RHEL Hewlett Packard: Dual-port Fibre Channel Adapter EMC SAN
[32-Bit] 3.0: U7 for HP Proliant BL25p/BL45p 381881-B21, Copy 02.23
AS/ES5, U8 FCA2214/281541-B21 (QLA2340),
AS/ES5; FCA2214DC/321835-B21 (QLA2342);
Red Hat RHEL IBM: 24P0960 (QLA2340), HS20 FC Exp Card
[32-Bit] 4.0: U3 (13N2203/26R0836)
AS/ES, U4
AS/ES
52 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat RHEL Emulex: LP10000ExDC-E, LP1050Ex-E, EMC SAN
[32-Bit] 3.0: U7 LP9002C-E; Copy 02.23
AS/ES5, U8
AS/ES5; QLogic: QLE2360-E-SP, QLE2362-E-SP
Red Hat RHEL
[32-Bit]: 3.9
AS/ES5, 4.0
AS/ES, 4.0 U1
AS/ES, 4.0 U3
AS/ES, 4.0 U4
AS/ES, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0, 5.1,
5.2
53 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat RHEL Hewlett Packard A6826A; EMC SAN
[32-Bit] 3.0: U7 IBM: 00N6881 (QLA2200), 19K1246 (QLA2310); Copy 02.23
AS/ES5, U8
AS/ES5; QLogic QLA2200F-EMC
Red Hat RHEL
[32-Bit]: 3.9
AS/ES5, 4.0 U3
AS/ES, 4.0 U4
AS/ES, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0, 5.1,
5.2
54 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat RHEL EMC SAN See2
[32-Bit]: 3.9 Copy 02.23
AS/ES5, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0, 5.1,
5.2
55 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat RHEL EMC: 250-048-900, Integrated; EMC SAN
[32-Bit]: 3.9 Copy 02.23
AS/ES5, 4.5 Emulex: LP11000-E, LP11002-E, LP1150-E,
AS/ES, 4.6 LPe11000-E, LPe11000-E-G, LPe11002-E,
AS/ES, 4.7 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
AS/ES, 5.0, 5.1,
5.2 Hewlett Packard: A6795A, A9782A13, 14, 15, 16, 17,
18, 19, A9784A13, 14, 15, 16, 17, 18, 19, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A11,
12;

IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773,


5774, 6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
56 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See2
[32-Bit]: 3.9 LP1050DC-E, LP8000-EMC, LP9002-E Copy 02.23
AS/ES5, 4.5 (LP9002L-E), LP9802-E, LP9802DC-E, LP982-E;
AS/ES, 4.6
AS/ES, 4.7 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
AS/ES, 5.0, 5.1, (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
5.2 (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for
HP Proliant BL30p/BL35p 354054-B21, FCA2101

03/02/2014 45 Information Management Software Array Capabilities


Information Management Software Array Capabilities

(LP952), FCA2214/281541-B21 (QLA2340),


FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384
(LP9802), FCA2404 (LP9802), FCA2404DC
(LP9802DC), FCA2408 (LP982), HP QLogic-based
Fibre Channel Mezzanine HBA for BL20p G3/BL20p
G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
1. NS80FC has equivalent array attributes to CX3-80
2. Windows 2000 hosts running less than SP4 could be susceptible to data loss during LUN expansion operations. This issue is corrected by Microsoft in SP4, or by applying hotfix
327020. See EMC Solution IS emc73538 and Microsoft Knowledge Base article 327020 for more information.
3. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
4. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
5. In accordance with the Red Hat Enterprise Linux Errata Support Policy, the regular 7 year life-cycle of Red Hat Enterprise Linux 3 will end on October 31, 2010. All RHEL 3
configurations in the ESM will be frozen as of the publication of the October 2010 ESM. At this time, Red Hat Enterprise Linux 3 will no longer be publicly supported and will require
an extended support contract from Red Hat in order for the RHEL 3 configuration in the ESM to be supported by EMC.
6. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
7. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.
8. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator.
9. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator. Refer to the EMC Host Connectivity guide for additional information on Windows iSCSI components and the Microsoft iSCSI Software Initiator usage.
10. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
11. The AB465A 2port/2Gig fibre channel/GigE combo card only qualified fibre channel port at this time.
12. The AB465A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
13. FC-AL, FC-SW topologies can co-exist on the same server but not on same HBA, provided that different topologies are attached to different HBAs; with the exception of the dual port
A6826A with one port FC-AL and the other port FC-SW.
14. Auto-sensing capability on the HBA is permanently enabled. There is no option to disable auto-sensing on the HBA.
15. The A9782A/A9784A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
16. The A9782A/A9784A fibre channel/GigE combo card only port qualified is fibre channel at this time.
17. The A9782A/A9784A HBA is capable of supporting both 1 and 2 Gb speeds.
18. The A9782A/A9784A the adapter operates in PCI 33 Mhz/66 Mhz and PCI-X 66 Mhz/100Mhz/133Mhz bus speeds with a 64-bit bus width
19. A6826A/A9784A/A9782A hbas: host must be configured as a 64Bit operating system.
20. CLARiiON CX3-40c/CX3-20c requires minimum revision 03.22.xxx.5.50x.
21. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports

Red Hat RHEL [AMD-64]


Red Hat RHEL [AMD-64]
Information
Operating Management
No. Storage Array System Host Bus Adapter Software Comments
1 Red Hat EMC SAN
RHEL Copy 02.26
[AMD-64]
3.0: U7
AS/ES1, U8
AS/ES1
2 Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
RHEL LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 02.26
[AMD-64] LP9802DC-E, LP982-E;
3.0: U7
AS/ES1, U8 Hewlett Packard: Dual-port Fibre Channel Adapter for
AS/ES1 HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2200F-EMC, QLA2310F-E-SP,
QLA2340-E-SP, QLA2342-E-SP, QLE2360-E-SP,
QLE2362-E-SP
3 Red Hat Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
RHEL Copy 02.26
[AMD-64] Hewlett Packard A6826A;
3.0: U7 IBM: 00N6881 (QLA2200), 19K1246 (QLA2310)
AS/ES1, U8
AS/ES1;
Red Hat
RHEL
[AMD-64]
3.9 AS/ES1
4 Red Hat EMC SAN See2
RHEL Copy 02.26
[AMD-64]
3.9 AS/ES1
5 Red Hat EMC SAN
RHEL Copy: 02.23,
[AMD-64] 03.26
3.9 AS/ES1

03/02/2014 46 Information Management Software Array Capabilities


Information Management Software Array Capabilities
6 Red Hat EMC: 250-048-900, Integrated; EMC SAN
RHEL Copy 02.26
[AMD-64] Fujitsu Ltd.: PW008FC2, PW008FC3;
3.9 AS/ES1
Hewlett Packard: A6795A, A9782A9, 10, 11, 12, 13, 14, 15,
A9784A9, 10, 11, 12, 13, 14, 15, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A16, 17;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
7 Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See2
RHEL LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.265
[AMD-64] LP9802-E, LP9802DC-E, LP982-E;
3.9 AS/ES1
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
8 Red Hat Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
RHEL LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 02.265
[AMD-64] LPe11002-E-G, LPe1150-E, LPe1150-E-G;
3.9 AS/ES1
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLE2360-E-SP, QLE2362-E-SP,
QLE2460-E-SP, QLE2462-E-SP
9 Red Hat Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See2
RHEL (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 02.26
[AMD-64] (LP8000), Dual-port Fibre Channel Adapter for HP
3.9 AS/ES1 Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F)
10 EMC CLARiiON: AX4-5, CX3-10c, CX3-40c/CX3-20c, Red Hat EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300; RHEL Copy 02.26
[AMD-64]
EMC Celerra NX4 (FC) 3.9 AS/ES1
11 EMC CLARiiON: AX4-5, CX300; Red Hat EMC SAN
RHEL Copy 03.26
EMC Celerra NX4 (FC) [AMD-64]
3.9 AS/ES1
12 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) RHEL Copy 03.26
[AMD-64] Hewlett Packard: A6795A, A6826A, A9782A9, 10, 11, 12,
3.9 AS/ES1 13, 14, 15, A9784A9, 10, 11, 12, 13, 14, 15, AB378A,
AB379A (QLA2462), AB465A16, 17;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
QLogic QLA2200F-EMC
13 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) RHEL LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 03.265
[AMD-64] LPe11002-E-G, LPe1150-E, LPe1150-E-G;
3.9 AS/ES1
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP, QLE2360-E-SP,
QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
QLE4060C-E-SP, QLE4062C-E-SP
14 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300 RHEL Copy 02.23
[AMD-64]
3.9 AS/ES1
15 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); RHEL Copy 03.26
[AMD-64]
EMC Celerra: NS20FC20, NS80FC21 3.0: U7
AS/ES1, U8
AS/ES1
16 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat Emulex: LP10000-E, LP10000DC-E, LP10000ExDC-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); RHEL LP1050-E, LP1050DC-E, LP1050Ex-E, LP9002-E Copy 03.26
[AMD-64] (LP9002L-E), LP9002C-E, LP9802-E, LP9802DC-E,
EMC Celerra: NS20FC20, NS80FC21 3.0: U7 LP982-E;
AS/ES1, U8
AS/ES1 Hewlett Packard: A6826A, Dual-port Fibre Channel
Adapter for HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 00N6881 (QLA2200), 19K1246 (QLA2310),
24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2200F-EMC, QLA2310F-E-SP,
QLA2340-E-SP, QLA2342-E-SP, QLE2360-E-SP,
QLE2362-E-SP

03/02/2014 47 Information Management Software Array Capabilities


Information Management Software Array Capabilities
17 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c8, Red Hat EMC SAN See2
CX3-80/CX3-40(F)/CX3-20(F)8 RHEL Copy 03.26
[AMD-64]
3.9 AS/ES1
18 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c8, Red Hat EMC: 250-048-900, Integrated; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F)8 RHEL Copy 03.26
[AMD-64] Hewlett Packard AB232A (LP9802);
3.9 AS/ES1 NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
19 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c8, Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See2
CX3-80/CX3-40(F)/CX3-20(F)8 RHEL LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 03.265
[AMD-64] LP9802-E, LP9802DC-E, LP982-E;
3.9 AS/ES1
QLogic: QLA2340-E-SP, QLA2342-E-SP
20 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c8, Red Hat Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See2
CX3-80/CX3-40(F)/CX3-20(F)8 RHEL (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 03.26
[AMD-64] (LP8000), Dual-port Fibre Channel Adapter for HP
3.9 AS/ES1 Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic QLA2310F-E-SP
21 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X3, 4; [AMD-64]
3.0: U7
EMC Celerra: NS-120, NS-480, NS-9606, 7 AS/ES1, U8
AS/ES1
22 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X3, 4; [AMD-64] LP9802DC-E, LP982-E;
3.0: U7
EMC Celerra: NS-120, NS-480, NS-9606, 7 AS/ES1, U8 Hewlett Packard: Dual-port Fibre Channel Adapter for
AS/ES1 HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
23 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X3, 4; [AMD-64] Hewlett Packard A6826A;
3.0: U7 IBM: 00N6881 (QLA2200), 19K1246 (QLA2310);
EMC Celerra: NS-120, NS-480, NS-9606, 7 AS/ES1, U8
AS/ES1; QLogic: QLA2200F-EMC, QLE2360-E-SP,
QLE2362-E-SP
Red Hat
RHEL
[AMD-64]
3.9 AS/ES1
24 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat EMC SAN See2
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X3, 4; [AMD-64]
3.9 AS/ES1
EMC Celerra: NS-120, NS-480, NS-9606, 7
25 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X3, 4; [AMD-64] Emulex: LP11000-E, LP11002-E, LP1150-E,
3.9 AS/ES1 LPe11000-E, LPe11000-E-G, LPe11002-E,
EMC Celerra: NS-120, NS-480, NS-9606, 7 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A9782A9, 10, 11, 12, 13, 14, 15,
A9784A9, 10, 11, 12, 13, 14, 15, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A16, 17;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4010-E-SP, QLA4010C-E-SP, QLA4050-E-SP,
QLA4050C-E-SP18, 19, QLA4052C-E-SP18, 19,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
26 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See2
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X3, 4; [AMD-64] LP9802-E, LP9802DC-E, LP982-E;
3.9 AS/ES1
EMC Celerra: NS-120, NS-480, NS-9606, 7 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),

03/02/2014 48 Information Management Software Array Capabilities


Information Management Software Array Capabilities

FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
27 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL Copy 04.28
[AMD-64]
EMC Celerra: NS-120, NS-480, NS-9606, 7 3.0: U7
AS/ES1, U8
AS/ES1
28 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.28
[AMD-64] LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9606, 7 3.0: U7
AS/ES1, U8 Hewlett Packard: Dual-port Fibre Channel Adapter for
AS/ES1 HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
29 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL Copy 04.28
[AMD-64] Hewlett Packard A6826A;
EMC Celerra: NS-120, NS-480, NS-9606, 7 3.0: U7 IBM: 00N6881 (QLA2200), 19K1246 (QLA2310);
AS/ES1, U8
AS/ES1; QLogic: QLA2200F-EMC, QLE2360-E-SP,
QLE2362-E-SP
Red Hat
RHEL
[AMD-64]
3.9 AS/ES1
30 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat EMC SAN See2
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL Copy 04.28
[AMD-64]
EMC Celerra: NS-120, NS-480, NS-9606, 7 3.9 AS/ES1
31 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL Copy 04.28
[AMD-64] Emulex: LP11000-E, LP11002-E, LP1150-E,
EMC Celerra: NS-120, NS-480, NS-9606, 7 3.9 AS/ES1 LPe11000-E, LPe11000-E-G, LPe11002-E,
LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A9782A9, 10, 11, 12, 13, 14, 15,
A9784A9, 10, 11, 12, 13, 14, 15, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A16, 17;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4010-E-SP, QLA4010C-E-SP, QLA4050-E-SP,
QLA4050C-E-SP18, 19, QLA4052C-E-SP18, 19,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
32 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See2
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.28
[AMD-64] LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9606, 7 3.9 AS/ES1
Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP

03/02/2014 49 Information Management Software Array Capabilities


Information Management Software Array Capabilities
33 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat EMC SAN
RHEL Copy 02.23
[AMD-64]
3.0: U7
AS/ES1, U8
AS/ES1
34 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
RHEL LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 02.23
[AMD-64] LP9802DC-E, LP982-E;
3.0: U7
AS/ES1, U8 Hewlett Packard: Dual-port Fibre Channel Adapter for
AS/ES1 HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
35 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
RHEL Copy 02.23
[AMD-64] Hewlett Packard A6826A;
3.0: U7 IBM: 00N6881 (QLA2200), 19K1246 (QLA2310);
AS/ES1, U8
AS/ES1; QLogic: QLA2200F-EMC, QLE2360-E-SP,
QLE2362-E-SP
Red Hat
RHEL
[AMD-64]
3.9 AS/ES1
36 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat EMC SAN See2
RHEL Copy 02.23
[AMD-64]
3.9 AS/ES1
37 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat EMC: 250-048-900, Integrated; EMC SAN
RHEL Copy 02.23
[AMD-64] Emulex: LP11000-E, LP11002-E, LP1150-E,
3.9 AS/ES1 LPe11000-E, LPe11000-E-G, LPe11002-E,
LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Hewlett Packard: A6795A, A9782A9, 10, 11, 12, 13, 14, 15,
A9784A9, 10, 11, 12, 13, 14, 15, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A16, 17;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP, QLE2460-E-SP,
QLE2462-E-SP, QLE4060C-E-SP, QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
38 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See2
RHEL LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.23
[AMD-64] LP9802-E, LP9802DC-E, LP982-E;
3.9 AS/ES1
Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
1. In accordance with the Red Hat Enterprise Linux Errata Support Policy, the regular 7 year life-cycle of Red Hat Enterprise Linux 3 will end on October 31, 2010. All RHEL 3
configurations in the ESM will be frozen as of the publication of the October 2010 ESM. At this time, Red Hat Enterprise Linux 3 will no longer be publicly supported and will require
an extended support contract from Red Hat in order for the RHEL 3 configuration in the ESM to be supported by EMC.
2. Windows 2000 hosts running less than SP4 could be susceptible to data loss during LUN expansion operations. This issue is corrected by Microsoft in SP4, or by applying hotfix
327020. See EMC Solution IS emc73538 and Microsoft Knowledge Base article 327020 for more information.
3. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
4. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.
5. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
6. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
7. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
8. CLARiiON CX3-40c/CX3-20c requires minimum revision 03.22.xxx.5.50x.
9. FC-AL, FC-SW topologies can co-exist on the same server but not on same HBA, provided that different topologies are attached to different HBAs; with the exception of the dual port
A6826A with one port FC-AL and the other port FC-SW.
10. Auto-sensing capability on the HBA is permanently enabled. There is no option to disable auto-sensing on the HBA.
11. The A9782A/A9784A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
12. The A9782A/A9784A fibre channel/GigE combo card only port qualified is fibre channel at this time.
13. The A9782A/A9784A HBA is capable of supporting both 1 and 2 Gb speeds.
14. The A9782A/A9784A the adapter operates in PCI 33 Mhz/66 Mhz and PCI-X 66 Mhz/100Mhz/133Mhz bus speeds with a 64-bit bus width
15. A6826A/A9784A/A9782A hbas: host must be configured as a 64Bit operating system.

03/02/2014 50 Information Management Software Array Capabilities


Information Management Software Array Capabilities
16. The AB465A 2port/2Gig fibre channel/GigE combo card only qualified fibre channel port at this time.
17. The AB465A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
18. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator.
19. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator. Refer to the EMC Host Connectivity guide for additional information on Windows iSCSI components and the Microsoft iSCSI Software Initiator usage.
20. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
21. NS80FC has equivalent array attributes to CX3-80

Red Hat RHEL [EM64T]


Red Hat RHEL [EM64T]
Information
Operating Management
No. Storage Array System Host Bus Adapter Software Comments
1 Red Hat EMC SAN
RHEL Copy 02.26
[EM64T]
3.0: U7
AS/ES1, U8
AS/ES1
2 Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
RHEL LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 02.26
[EM64T] LP9802DC-E, LP982-E;
3.0: U7
AS/ES1, U8 Hewlett Packard: Dual-port Fibre Channel Adapter for
AS/ES1 HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2200F-EMC, QLA2310F-E-SP,
QLA2340-E-SP, QLA2342-E-SP, QLE2360-E-SP,
QLE2362-E-SP
3 Red Hat Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
RHEL Copy 02.26
[EM64T] Hewlett Packard A6826A;
3.0: U7 IBM: 00N6881 (QLA2200), 19K1246 (QLA2310)
AS/ES1, U8
AS/ES1;
Red Hat
RHEL
[EM64T] 3.9
AS/ES1
4 Red Hat EMC SAN See3
RHEL Copy 02.26
[EM64T] 3.9
AS/ES1
5 Red Hat EMC SAN
RHEL Copy: 02.23,
[EM64T] 3.9 03.26
AS/ES1
6 Red Hat EMC: 250-048-900, Integrated; EMC SAN
RHEL Copy 02.26
[EM64T] 3.9 Fujitsu Ltd.: PW008FC2, PW008FC3;
AS/ES1
Hewlett Packard: A6795A, A9782A9, 10, 11, 12, 13, 14, 15,
A9784A9, 10, 11, 12, 13, 14, 15, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A16, 17;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
7 Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
RHEL LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.268
[EM64T] 3.9 LP9802-E, LP9802DC-E, LP982-E;
AS/ES1
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
8 Red Hat Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
RHEL LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 02.268
[EM64T] 3.9 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
AS/ES1
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLE2360-E-SP, QLE2362-E-SP,
QLE2460-E-SP, QLE2462-E-SP
9 Red Hat Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See3
RHEL (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 02.26
[EM64T] 3.9 (LP8000), Dual-port Fibre Channel Adapter for HP
AS/ES1 Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F)

03/02/2014 51 Information Management Software Array Capabilities


Information Management Software Array Capabilities
10 EMC CLARiiON: AX4-5, CX3-10c, CX3-40c/CX3-20c, Red Hat EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300; RHEL Copy 02.26
[EM64T] 3.9
EMC Celerra NX4 (FC) AS/ES1
11 EMC CLARiiON: AX4-5, CX300; Red Hat EMC SAN
RHEL Copy 03.26
EMC Celerra NX4 (FC) [EM64T] 3.9
AS/ES1
12 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) RHEL Copy 03.26
[EM64T] 3.9 Hewlett Packard: A6795A, A6826A, A9782A9, 10, 11, 12,
AS/ES1 13, 14, 15, A9784A9, 10, 11, 12, 13, 14, 15, AB378A,
AB379A (QLA2462), AB465A16, 17;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
QLogic QLA2200F-EMC
13 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) RHEL LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 03.268
[EM64T] 3.9 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
AS/ES1
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP, QLE2360-E-SP,
QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
QLE4060C-E-SP, QLE4062C-E-SP
14 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300 RHEL Copy 02.23
[EM64T] 3.9
AS/ES1
15 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); RHEL Copy 03.26
[EM64T]
EMC Celerra: NS20FC20, NS80FC21 3.0: U7
AS/ES1, U8
AS/ES1
16 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat Emulex: LP10000-E, LP10000DC-E, LP10000ExDC-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); RHEL LP1050-E, LP1050DC-E, LP1050Ex-E, LP9002-E Copy 03.26
[EM64T] (LP9002L-E), LP9002C-E, LP9802-E, LP9802DC-E,
EMC Celerra: NS20FC20, NS80FC21 3.0: U7 LP982-E;
AS/ES1, U8
AS/ES1 Hewlett Packard: A6826A, Dual-port Fibre Channel
Adapter for HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 00N6881 (QLA2200), 19K1246 (QLA2310),
24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2200F-EMC, QLA2310F-E-SP,
QLA2340-E-SP, QLA2342-E-SP, QLE2360-E-SP,
QLE2362-E-SP
17 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c2, Red Hat EMC SAN See3
CX3-80/CX3-40(F)/CX3-20(F)2 RHEL Copy 03.26
[EM64T] 3.9
AS/ES1
18 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c2, Red Hat EMC: 250-048-900, Integrated; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F)2 RHEL Copy 03.26
[EM64T] 3.9 Hewlett Packard AB232A (LP9802);
AS/ES1 NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
19 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c2, Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
CX3-80/CX3-40(F)/CX3-20(F)2 RHEL LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 03.268
[EM64T] 3.9 LP9802-E, LP9802DC-E, LP982-E;
AS/ES1
QLogic: QLA2340-E-SP, QLA2342-E-SP
20 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c2, Red Hat Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See3
CX3-80/CX3-40(F)/CX3-20(F)2 RHEL (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 03.26
[EM64T] 3.9 (LP8000), Dual-port Fibre Channel Adapter for HP
AS/ES1 Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic QLA2310F-E-SP
21 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X4, 5; [EM64T]
3.0: U7
EMC Celerra: NS-120, NS-480, NS-9606, 7 AS/ES1, U8
AS/ES1
22 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X4, 5; [EM64T] LP9802DC-E, LP982-E;
3.0: U7
EMC Celerra: NS-120, NS-480, NS-9606, 7 AS/ES1, U8 Hewlett Packard: Dual-port Fibre Channel Adapter for
AS/ES1 HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);

03/02/2014 52 Information Management Software Array Capabilities


Information Management Software Array Capabilities

QLogic: QLA2310F-E-SP, QLA2340-E-SP,


QLA2342-E-SP
23 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X4, 5; [EM64T] Hewlett Packard A6826A;
3.0: U7 IBM: 00N6881 (QLA2200), 19K1246 (QLA2310);
EMC Celerra: NS-120, NS-480, NS-9606, 7 AS/ES1, U8
AS/ES1; QLogic: QLA2200F-EMC, QLE2360-E-SP,
QLE2362-E-SP
Red Hat
RHEL
[EM64T] 3.9
AS/ES1
24 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat EMC SAN See3
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X4, 5; [EM64T] 3.9
AS/ES1
EMC Celerra: NS-120, NS-480, NS-9606, 7
25 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X4, 5; [EM64T] 3.9 Emulex: LP11000-E, LP11002-E, LP1150-E,
AS/ES1 LPe11000-E, LPe11000-E-G, LPe11002-E,
EMC Celerra: NS-120, NS-480, NS-9606, 7 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A9782A9, 10, 11, 12, 13, 14, 15,
A9784A9, 10, 11, 12, 13, 14, 15, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A16, 17;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4010-E-SP, QLA4010C-E-SP, QLA4050-E-SP,
QLA4050C-E-SP18, 19, QLA4052C-E-SP18, 19,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
26 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X4, 5; [EM64T] 3.9 LP9802-E, LP9802DC-E, LP982-E;
AS/ES1
EMC Celerra: NS-120, NS-480, NS-9606, 7 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
27 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL Copy 04.28
[EM64T]
EMC Celerra: NS-120, NS-480, NS-9606, 7 3.0: U7
AS/ES1, U8
AS/ES1
28 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.28
[EM64T] LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9606, 7 3.0: U7
AS/ES1, U8 Hewlett Packard: Dual-port Fibre Channel Adapter for
AS/ES1 HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
29 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL Copy 04.28
[EM64T] Hewlett Packard A6826A;
EMC Celerra: NS-120, NS-480, NS-9606, 7 3.0: U7 IBM: 00N6881 (QLA2200), 19K1246 (QLA2310);
AS/ES1, U8
AS/ES1; QLogic: QLA2200F-EMC, QLE2360-E-SP,
QLE2362-E-SP
Red Hat
RHEL
[EM64T] 3.9
AS/ES1

03/02/2014 53 Information Management Software Array Capabilities


Information Management Software Array Capabilities
30 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat EMC SAN See3
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL Copy 04.28
[EM64T] 3.9
EMC Celerra: NS-120, NS-480, NS-9606, 7 AS/ES1
31 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL Copy 04.28
[EM64T] 3.9 Emulex: LP11000-E, LP11002-E, LP1150-E,
EMC Celerra: NS-120, NS-480, NS-9606, 7 AS/ES1 LPe11000-E, LPe11000-E-G, LPe11002-E,
LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A9782A9, 10, 11, 12, 13, 14, 15,
A9784A9, 10, 11, 12, 13, 14, 15, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A16, 17;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4010-E-SP, QLA4010C-E-SP, QLA4050-E-SP,
QLA4050C-E-SP18, 19, QLA4052C-E-SP18, 19,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
32 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.28
[EM64T] 3.9 LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9606, 7 AS/ES1
Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
33 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat EMC SAN
RHEL Copy 02.23
[EM64T]
3.0: U7
AS/ES1, U8
AS/ES1
34 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
RHEL LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 02.23
[EM64T] LP9802DC-E, LP982-E;
3.0: U7
AS/ES1, U8 Hewlett Packard: Dual-port Fibre Channel Adapter for
AS/ES1 HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
35 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
RHEL Copy 02.23
[EM64T] Hewlett Packard A6826A;
3.0: U7 IBM: 00N6881 (QLA2200), 19K1246 (QLA2310);
AS/ES1, U8
AS/ES1; QLogic: QLA2200F-EMC, QLE2360-E-SP,
QLE2362-E-SP
Red Hat
RHEL
[EM64T] 3.9
AS/ES1
36 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat EMC SAN See3
RHEL Copy 02.23
[EM64T] 3.9
AS/ES1
37 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat EMC: 250-048-900, Integrated; EMC SAN
RHEL Copy 02.23
[EM64T] 3.9 Emulex: LP11000-E, LP11002-E, LP1150-E,
AS/ES1 LPe11000-E, LPe11000-E-G, LPe11002-E,
LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Hewlett Packard: A6795A, A9782A9, 10, 11, 12, 13, 14, 15,
A9784A9, 10, 11, 12, 13, 14, 15, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A16, 17;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP, QLE2460-E-SP,
QLE2462-E-SP, QLE4060C-E-SP, QLE4062C-E-SP;

03/02/2014 54 Information Management Software Array Capabilities


Information Management Software Array Capabilities

Unisys FCH742313-P64 (LP9802)


38 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
RHEL LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.23
[EM64T] 3.9 LP9802-E, LP9802DC-E, LP982-E;
AS/ES1
Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
1. In accordance with the Red Hat Enterprise Linux Errata Support Policy, the regular 7 year life-cycle of Red Hat Enterprise Linux 3 will end on October 31, 2010. All RHEL 3
configurations in the ESM will be frozen as of the publication of the October 2010 ESM. At this time, Red Hat Enterprise Linux 3 will no longer be publicly supported and will require
an extended support contract from Red Hat in order for the RHEL 3 configuration in the ESM to be supported by EMC.
2. CLARiiON CX3-40c/CX3-20c requires minimum revision 03.22.xxx.5.50x.
3. Windows 2000 hosts running less than SP4 could be susceptible to data loss during LUN expansion operations. This issue is corrected by Microsoft in SP4, or by applying hotfix
327020. See EMC Solution IS emc73538 and Microsoft Knowledge Base article 327020 for more information.
4. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
5. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.
6. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
7. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
8. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
9. FC-AL, FC-SW topologies can co-exist on the same server but not on same HBA, provided that different topologies are attached to different HBAs; with the exception of the dual port
A6826A with one port FC-AL and the other port FC-SW.
10. Auto-sensing capability on the HBA is permanently enabled. There is no option to disable auto-sensing on the HBA.
11. The A9782A/A9784A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
12. The A9782A/A9784A fibre channel/GigE combo card only port qualified is fibre channel at this time.
13. The A9782A/A9784A HBA is capable of supporting both 1 and 2 Gb speeds.
14. The A9782A/A9784A the adapter operates in PCI 33 Mhz/66 Mhz and PCI-X 66 Mhz/100Mhz/133Mhz bus speeds with a 64-bit bus width
15. A6826A/A9784A/A9782A hbas: host must be configured as a 64Bit operating system.
16. The AB465A 2port/2Gig fibre channel/GigE combo card only qualified fibre channel port at this time.
17. The AB465A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
18. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator.
19. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator. Refer to the EMC Host Connectivity guide for additional information on Windows iSCSI components and the Microsoft iSCSI Software Initiator usage.
20. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
21. NS80FC has equivalent array attributes to CX3-80

Red Hat RHEL [IA64]


Red Hat RHEL [IA64]
Information
Operating Management
No. Storage Array System Host Bus Adapter Software Comments
1 Red Hat RHEL Hewlett Packard: Dual-port Fibre Channel Adapter EMC SAN
[IA64] 3.0: U7 for HP Proliant BL25p/BL45p 381881-B21, Copy 02.26
AS/ES5, U8 FCA2214/281541-B21 (QLA2340),
AS/ES5; FCA2214DC/321835-B21 (QLA2342);
Red Hat RHEL IBM: 24P0960 (QLA2340), HS20 FC Exp Card
[IA64] 4.0 U4 (13N2203/26R0836);
AS/ES
QLogic QLA2200F-EMC
2 Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
[IA64] 3.0: U7 LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 02.26
AS/ES5, U8 LP9802DC-E, LP982-E;
AS/ES5;
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
Red Hat RHEL QLA2342-E-SP, QLE2360-E-SP, QLE2362-E-SP
[IA64] 4.0:
AS/ES, U1
AS/ES, U4
AS/ES
3 Red Hat RHEL EMC SAN
[IA64] 3.0: U7 Copy 02.26
AS/ES5, U8
AS/ES5;
Red Hat RHEL
[IA64] 4.0: U2
AS/ES, U3
AS/ES, U4
AS/ES

03/02/2014 55 Information Management Software Array Capabilities


Information Management Software Array Capabilities
4 Red Hat RHEL Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E EMC SAN
[IA64] 3.0: U7 Copy 02.26
AS/ES5, U8
AS/ES5;
Red Hat RHEL
[IA64]: 3.9
AS/ES5, 4.0
AS/ES, 4.0 U1
AS/ES, 4.0 U4
AS/ES, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
5 Red Hat RHEL Hewlett Packard A6826A; EMC SAN
[IA64] 3.0: U7 IBM: 00N6881 (QLA2200), 19K1246 (QLA2310) Copy 02.26
AS/ES5, U8
AS/ES5;
Red Hat RHEL
[IA64]: 3.9
AS/ES5, 4.0 U4
AS/ES, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
6 Red Hat RHEL EMC SAN See1
[IA64]: 3.9 Copy 02.26
AS/ES5, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
7 Red Hat RHEL EMC SAN
[IA64]: 3.9 Copy: 02.23,
AS/ES5, 4.5 03.26
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
8 Red Hat RHEL EMC: 250-048-900, Integrated; EMC SAN
[IA64]: 3.9 Copy 02.26
AS/ES5, 4.5 Fujitsu Ltd.: PW008FC2, PW008FC3;
AS/ES, 4.6
AS/ES, 4.7 Hewlett Packard: A6795A, A9782A12, 13, 14, 15, 16, 17,
AS/ES, 5.0, 18, A9784A12, 13, 14, 15, 16, 17, 18, AB232A (LP9802),
5.1, 5.2 AB378A, AB379A (QLA2462), AB465A19, 20;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773,
5774, 6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
9 Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See1
[IA64]: 3.9 LP1050DC-E, LP8000-EMC, LP9002-E Copy 02.2611
AS/ES5, 4.5 (LP9002L-E), LP9802-E, LP9802DC-E, LP982-E;
AS/ES, 4.6
AS/ES, 4.7 QLogic: QLA2310F-E-SP, QLA2340-E-SP,
AS/ES, 5.0, QLA2342-E-SP
5.1, 5.2
10 Red Hat RHEL Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
[IA64]: 3.9 LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 02.2611
AS/ES5, 4.5 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
AS/ES, 4.6
AS/ES, 4.7 QLogic: QLA2200F-EMC, QLA2460-E-SP,
AS/ES, 5.0, QLA2462-E-SP, QLE2360-E-SP, QLE2362-E-SP,
5.1, 5.2 QLE2460-E-SP, QLE2462-E-SP
11 Red Hat RHEL Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See1
[IA64]: 3.9 (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 02.26
AS/ES5, 4.5 (LP8000), Dual-port Fibre Channel Adapter for HP
AS/ES, 4.6 Proliant BL20p G2 300874-B21, Dual-port Fibre
AS/ES, 4.7 Channel Adapter for HP Proliant BL25p/BL45p
AS/ES, 5.0, 381881-B21, Dual-port Fibre Channel Adapter for HP
5.1, 5.2 Proliant BL30p/BL35p 354054-B21, FCA2101
(LP952), FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384
(LP9802), FCA2404 (LP9802), FCA2404DC
(LP9802DC), FCA2408 (LP982), HP QLogic-based
Fibre Channel Mezzanine HBA for BL20p G3/BL20p
G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F)
12 EMC CLARiiON: AX4-5, CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300; [IA64]: 3.9 Copy 02.26
AS/ES5, 4.5
EMC Celerra NX4 (FC) AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
13 EMC CLARiiON: AX4-5, CX300; Red Hat RHEL EMC SAN
[IA64]: 3.9 Copy 03.26
EMC Celerra NX4 (FC) AS/ES5, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2

03/02/2014 56 Information Management Software Array Capabilities


Information Management Software Array Capabilities
14 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL QLogic: QLA4050C-E-SP, QLA4052C-E-SP, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [IA64]: 3.9 QLE4060C-E-SP, QLE4062C-E-SP Copy 03.2611
AS/ES5, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
15 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL Emulex: LP10000ExDC-E, LP1050Ex-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [IA64]: 3.9 LP9002C-E; Copy 03.26
AS/ES5, 5.2
Hewlett Packard: A6795A, A6826A, A9782A12, 13, 14,
15, 16, 17, 18, A9784A12, 13, 14, 15, 16, 17, 18, AB378A,
AB379A (QLA2462), AB465A19, 20;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977,
19K1246 (QLA2310), 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
QLogic QLA2200F-EMC
16 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [IA64]: 3.9 LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 03.2611
AS/ES5, 5.2 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLE2360-E-SP, QLE2362-E-SP, QLE2460-E-SP,
QLE2462-E-SP
17 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300 [IA64]: 3.9 Copy 02.23
AS/ES5, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
18 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL Hewlett Packard: Dual-port Fibre Channel Adapter EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [IA64] 3.0: U7 for HP Proliant BL25p/BL45p 381881-B21, Copy 03.26
AS/ES5, U8 FCA2214/281541-B21 (QLA2340),
EMC Celerra: NS20FC10, NS80FC4 AS/ES5; FCA2214DC/321835-B21 (QLA2342);
Red Hat RHEL IBM: 24P0960 (QLA2340), HS20 FC Exp Card
[IA64] 4.0 U4 (13N2203/26R0836)
AS/ES
19 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [IA64] 3.0: U7 LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 03.26
AS/ES5, U8 LP9802DC-E, LP982-E;
EMC Celerra: NS20FC10, NS80FC4 AS/ES5;
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
Red Hat RHEL QLA2342-E-SP, QLE2360-E-SP, QLE2362-E-SP
[IA64] 4.0:
AS/ES, U1
AS/ES, U4
AS/ES
20 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [IA64] 3.0: U7 Copy 03.26
AS/ES5, U8
EMC Celerra: NS20FC10, NS80FC4 AS/ES5;
Red Hat RHEL
[IA64] 4.0:
AS/ES, U1
AS/ES, U4
AS/ES;
Red Hat RHEL
[IA64]: 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0, 5.1
21 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [IA64] 3.0: U7 Copy 03.26
AS/ES5, U8
EMC Celerra: NS20FC10, NS80FC4 AS/ES5;
Red Hat RHEL
[IA64] 4.0: U2
AS/ES, U3
AS/ES, U4
AS/ES
22 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL Hewlett Packard A6826A; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [IA64] 3.0: U7 IBM: 00N6881 (QLA2200), 19K1246 (QLA2310); Copy 03.26
AS/ES5, U8
EMC Celerra: NS20FC10, NS80FC4 AS/ES5; QLogic QLA2200F-EMC
Red Hat RHEL
[IA64]: 4.0 U4
AS/ES, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0, 5.1
23 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [IA64]: 4.5 LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 03.2611
AS/ES, 4.6 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
EMC Celerra: NS20FC10, NS80FC4 AS/ES, 4.7
AS/ES, 5.0, 5.1 QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLE2360-E-SP, QLE2362-E-SP, QLE2460-E-SP,
QLE2462-E-SP
24 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL Hewlett Packard: A6795A, A9782A12, 13, 14, 15, 16, 17, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [IA64]: 4.5 18, A9784A12, 13, 14, 15, 16, 17, 18, AB378A, AB379A Copy 03.26
AS/ES, 4.6 (QLA2462), AB465A19, 20;
EMC Celerra: NS20FC10, NS80FC4 AS/ES, 4.7
AS/ES, 5.0, 5.1 IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773,
5774, 6227, 6228, 6239

03/02/2014 57 Information Management Software Array Capabilities


Information Management Software Array Capabilities
25 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c21, Red Hat RHEL EMC SAN See1
CX3-80/CX3-40(F)/CX3-20(F)21 [IA64]: 3.9 Copy 03.26
AS/ES5, 5.2
26 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c21, Red Hat RHEL EMC: 250-048-900, Integrated; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F)21 [IA64]: 3.9 Copy 03.26
AS/ES5, 5.2 Hewlett Packard AB232A (LP9802);
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
27 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c21, Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See1
CX3-80/CX3-40(F)/CX3-20(F)21 [IA64]: 3.9 LP1050DC-E, LP8000-EMC, LP9002-E Copy 03.2611
AS/ES5, 5.2 (LP9002L-E), LP9802-E, LP9802DC-E, LP982-E;
QLogic: QLA2340-E-SP, QLA2342-E-SP
28 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c21, Red Hat RHEL Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See1
CX3-80/CX3-40(F)/CX3-20(F)21 [IA64]: 3.9 (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 03.26
AS/ES5, 5.2 (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101
(LP952), FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384
(LP9802), FCA2404 (LP9802), FCA2404DC
(LP9802DC), FCA2408 (LP982), HP QLogic-based
Fibre Channel Mezzanine HBA for BL20p G3/BL20p
G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic QLA2310F-E-SP
29 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c21, Red Hat RHEL EMC SAN See1
CX3-80/CX3-40(F)/CX3-20(F)21; [IA64]: 4.5 Copy 03.26
AS/ES, 4.6
EMC Celerra: NS20FC10, NS80FC4 AS/ES, 4.7
AS/ES, 5.0, 5.1
30 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c21, Red Hat RHEL EMC: 250-048-900, Integrated; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F)21; [IA64]: 4.5 Copy 03.26
AS/ES, 4.6 Hewlett Packard AB232A (LP9802);
EMC Celerra: NS20FC10, NS80FC4 AS/ES, 4.7 NEC: NT2010A-A001 (QLA2340), NTAB232A
AS/ES, 5.0, 5.1 (LP9802);
Unisys FCH742313-P64 (LP9802)
31 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c21, Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See1
CX3-80/CX3-40(F)/CX3-20(F)21; [IA64]: 4.5 LP1050DC-E, LP8000-EMC, LP9002-E Copy 03.2611
AS/ES, 4.6 (LP9002L-E), LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS20FC10, NS80FC4 AS/ES, 4.7
AS/ES, 5.0, 5.1 QLogic: QLA2340-E-SP, QLA2342-E-SP
32 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c21, Red Hat RHEL Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See1
CX3-80/CX3-40(F)/CX3-20(F)21; [IA64]: 4.5 (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 03.26
AS/ES, 4.6 (LP8000), Dual-port Fibre Channel Adapter for HP
EMC Celerra: NS20FC10, NS80FC4 AS/ES, 4.7 Proliant BL20p G2 300874-B21, Dual-port Fibre
AS/ES, 5.0, 5.1 Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101
(LP952), FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384
(LP9802), FCA2404 (LP9802), FCA2404DC
(LP9802DC), FCA2408 (LP982), HP QLogic-based
Fibre Channel Mezzanine HBA for BL20p G3/BL20p
G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic QLA2310F-E-SP
33 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL Hewlett Packard: Dual-port Fibre Channel Adapter EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IA64] 3.0: U7 for HP Proliant BL25p/BL45p 381881-B21, Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; AS/ES5, U8 FCA2214/281541-B21 (QLA2340),
AS/ES5; FCA2214DC/321835-B21 (QLA2342);
EMC Celerra: NS-120, NS-480, NS-9602, 3
Red Hat RHEL IBM: 24P0960 (QLA2340), HS20 FC Exp Card
[IA64] 4.0 U4 (13N2203/26R0836)
AS/ES
34 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IA64] 3.0: U7 LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; AS/ES5, U8 LP9802DC-E, LP982-E;
AS/ES5;
EMC Celerra: NS-120, NS-480, NS-9602, 3 QLogic: QLA2310F-E-SP, QLA2340-E-SP,
Red Hat RHEL QLA2342-E-SP
[IA64] 4.0:
AS/ES, U1
AS/ES, U4
AS/ES
35 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IA64] 3.0: U7 Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; AS/ES5, U8
AS/ES5;
EMC Celerra: NS-120, NS-480, NS-9602, 3
Red Hat RHEL
[IA64] 4.0: U2
AS/ES, U3
AS/ES, U4
AS/ES

03/02/2014 58 Information Management Software Array Capabilities


Information Management Software Array Capabilities
36 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL Emulex: LP10000ExDC-E, LP1050Ex-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IA64] 3.0: U7 LP9002C-E; Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; AS/ES5, U8
AS/ES5; QLogic: QLE2360-E-SP, QLE2362-E-SP
EMC Celerra: NS-120, NS-480, NS-9602, 3
Red Hat RHEL
[IA64]: 3.9
AS/ES5, 4.0
AS/ES, 4.0 U1
AS/ES, 4.0 U4
AS/ES, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
37 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL Hewlett Packard A6826A; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IA64] 3.0: U7 IBM: 00N6881 (QLA2200), 19K1246 (QLA2310); Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; AS/ES5, U8
AS/ES5; QLogic QLA2200F-EMC
EMC Celerra: NS-120, NS-480, NS-9602, 3
Red Hat RHEL
[IA64]: 3.9
AS/ES5, 4.0 U4
AS/ES, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
38 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL EMC SAN See1
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IA64]: 3.9 Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; AS/ES5, 4.5
AS/ES, 4.6
EMC Celerra: NS-120, NS-480, NS-9602, 3 AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
39 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IA64]: 3.9 Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; AS/ES5, 4.5 Emulex: LP11000-E, LP11002-E, LP1150-E,
AS/ES, 4.6 LPe11000-E, LPe11000-E-G, LPe11002-E,
EMC Celerra: NS-120, NS-480, NS-9602, 3 AS/ES, 4.7 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
AS/ES, 5.0,
5.1, 5.2 Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A9782A12, 13, 14, 15, 16, 17,
18, A9784A12, 13, 14, 15, 16, 17, 18, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A19, 20;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773,
5774, 6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4010-E-SP, QLA4010C-E-SP, QLA4050-E-SP,
QLA4050C-E-SP8, 9, QLA4052C-E-SP8, 9,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
40 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See1
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IA64]: 3.9 LP1050DC-E, LP8000-EMC, LP9002-E Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; AS/ES5, 4.5 (LP9002L-E), LP9802-E, LP9802DC-E, LP982-E;
AS/ES, 4.6
EMC Celerra: NS-120, NS-480, NS-9602, 3 AS/ES, 4.7 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
AS/ES, 5.0, (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
5.1, 5.2 (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101
(LP952), FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384
(LP9802), FCA2404 (LP9802), FCA2404DC
(LP9802DC), FCA2408 (LP982), HP QLogic-based
Fibre Channel Mezzanine HBA for BL20p G3/BL20p
G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
41 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL Hewlett Packard: Dual-port Fibre Channel Adapter EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IA64] 3.0: U7 for HP Proliant BL25p/BL45p 381881-B21, Copy 04.28
AS/ES5, U8 FCA2214/281541-B21 (QLA2340),
EMC Celerra: NS-120, NS-480, NS-9602, 3 AS/ES5; FCA2214DC/321835-B21 (QLA2342);
Red Hat RHEL IBM: 24P0960 (QLA2340), HS20 FC Exp Card
[IA64] 4.0 U4 (13N2203/26R0836)
AS/ES
42 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IA64] 3.0: U7 LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.28
AS/ES5, U8 LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9602, 3 AS/ES5;
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
Red Hat RHEL QLA2342-E-SP
[IA64] 4.0:
AS/ES, U1
AS/ES, U4
AS/ES

03/02/2014 59 Information Management Software Array Capabilities


Information Management Software Array Capabilities
43 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IA64] 3.0: U7 Copy 04.28
AS/ES5, U8
EMC Celerra: NS-120, NS-480, NS-9602, 3 AS/ES5;
Red Hat RHEL
[IA64] 4.0: U2
AS/ES, U3
AS/ES, U4
AS/ES
44 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL Emulex: LP10000ExDC-E, LP1050Ex-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IA64] 3.0: U7 LP9002C-E; Copy 04.28
AS/ES5, U8
EMC Celerra: NS-120, NS-480, NS-9602, 3 AS/ES5; QLogic: QLE2360-E-SP, QLE2362-E-SP
Red Hat RHEL
[IA64]: 3.9
AS/ES5, 4.0
AS/ES, 4.0 U1
AS/ES, 4.0 U4
AS/ES, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
45 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL Hewlett Packard A6826A; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IA64] 3.0: U7 IBM: 00N6881 (QLA2200), 19K1246 (QLA2310); Copy 04.28
AS/ES5, U8
EMC Celerra: NS-120, NS-480, NS-9602, 3 AS/ES5; QLogic QLA2200F-EMC
Red Hat RHEL
[IA64]: 3.9
AS/ES5, 4.0 U4
AS/ES, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
46 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL EMC SAN See1
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IA64]: 3.9 Copy 04.28
AS/ES5, 4.5
EMC Celerra: NS-120, NS-480, NS-9602, 3 AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
47 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IA64]: 3.9 Copy 04.28
AS/ES5, 4.5 Emulex: LP11000-E, LP11002-E, LP1150-E,
EMC Celerra: NS-120, NS-480, NS-9602, 3 AS/ES, 4.6 LPe11000-E, LPe11000-E-G, LPe11002-E,
AS/ES, 4.7 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
AS/ES, 5.0,
5.1, 5.2 Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A9782A12, 13, 14, 15, 16, 17,
18, A9784A12, 13, 14, 15, 16, 17, 18, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A19, 20;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773,
5774, 6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4010-E-SP, QLA4010C-E-SP, QLA4050-E-SP,
QLA4050C-E-SP8, 9, QLA4052C-E-SP8, 9,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
48 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See1
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IA64]: 3.9 LP1050DC-E, LP8000-EMC, LP9002-E Copy 04.28
AS/ES5, 4.5 (LP9002L-E), LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9602, 3 AS/ES, 4.6
AS/ES, 4.7 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
AS/ES, 5.0, (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
5.1, 5.2 (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101
(LP952), FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384
(LP9802), FCA2404 (LP9802), FCA2404DC
(LP9802DC), FCA2408 (LP982), HP QLogic-based
Fibre Channel Mezzanine HBA for BL20p G3/BL20p
G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
49 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat RHEL Hewlett Packard: Dual-port Fibre Channel Adapter EMC SAN
[IA64] 3.0: U7 for HP Proliant BL25p/BL45p 381881-B21, Copy 02.23
AS/ES5, U8 FCA2214/281541-B21 (QLA2340),
AS/ES5; FCA2214DC/321835-B21 (QLA2342);
Red Hat RHEL IBM: 24P0960 (QLA2340), HS20 FC Exp Card
[IA64] 4.0 U4 (13N2203/26R0836)
AS/ES

03/02/2014 60 Information Management Software Array Capabilities


Information Management Software Array Capabilities
50 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
[IA64] 3.0: U7 LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 02.23
AS/ES5, U8 LP9802DC-E, LP982-E;
AS/ES5;
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
Red Hat RHEL QLA2342-E-SP
[IA64] 4.0:
AS/ES, U1
AS/ES, U4
AS/ES
51 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat RHEL EMC SAN
[IA64] 3.0: U7 Copy 02.23
AS/ES5, U8
AS/ES5;
Red Hat RHEL
[IA64] 4.0: U2
AS/ES, U3
AS/ES, U4
AS/ES
52 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat RHEL Emulex: LP10000ExDC-E, LP1050Ex-E, EMC SAN
[IA64] 3.0: U7 LP9002C-E; Copy 02.23
AS/ES5, U8
AS/ES5; QLogic: QLE2360-E-SP, QLE2362-E-SP
Red Hat RHEL
[IA64]: 3.9
AS/ES5, 4.0
AS/ES, 4.0 U1
AS/ES, 4.0 U4
AS/ES, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
53 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat RHEL Hewlett Packard A6826A; EMC SAN
[IA64] 3.0: U7 IBM: 00N6881 (QLA2200), 19K1246 (QLA2310); Copy 02.23
AS/ES5, U8
AS/ES5; QLogic QLA2200F-EMC
Red Hat RHEL
[IA64]: 3.9
AS/ES5, 4.0 U4
AS/ES, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
54 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat RHEL EMC SAN See1
[IA64]: 3.9 Copy 02.23
AS/ES5, 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
55 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat RHEL EMC: 250-048-900, Integrated; EMC SAN
[IA64]: 3.9 Copy 02.23
AS/ES5, 4.5 Emulex: LP11000-E, LP11002-E, LP1150-E,
AS/ES, 4.6 LPe11000-E, LPe11000-E-G, LPe11002-E,
AS/ES, 4.7 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
AS/ES, 5.0,
5.1, 5.2 Hewlett Packard: A6795A, A9782A12, 13, 14, 15, 16, 17,
18, A9784A12, 13, 14, 15, 16, 17, 18, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A19, 20;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773,
5774, 6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP, QLE2460-E-SP,
QLE2462-E-SP, QLE4060C-E-SP, QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
56 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See1
[IA64]: 3.9 LP1050DC-E, LP8000-EMC, LP9002-E Copy 02.23
AS/ES5, 4.5 (LP9002L-E), LP9802-E, LP9802DC-E, LP982-E;
AS/ES, 4.6
AS/ES, 4.7 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
AS/ES, 5.0, (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
5.1, 5.2 (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101
(LP952), FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384
(LP9802), FCA2404 (LP9802), FCA2404DC
(LP9802DC), FCA2408 (LP982), HP QLogic-based
Fibre Channel Mezzanine HBA for BL20p G3/BL20p
G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
1. Windows 2000 hosts running less than SP4 could be susceptible to data loss during LUN expansion operations. This issue is corrected by Microsoft in SP4, or by applying hotfix
327020. See EMC Solution IS emc73538 and Microsoft Knowledge Base article 327020 for more information.
2. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
3. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
4. NS80FC has equivalent array attributes to CX3-80
5. In accordance with the Red Hat Enterprise Linux Errata Support Policy, the regular 7 year life-cycle of Red Hat Enterprise Linux 3 will end on October 31, 2010. All RHEL 3
configurations in the ESM will be frozen as of the publication of the October 2010 ESM. At this time, Red Hat Enterprise Linux 3 will no longer be publicly supported and will require
an extended support contract from Red Hat in order for the RHEL 3 configuration in the ESM to be supported by EMC.
6. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
7. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.

03/02/2014 61 Information Management Software Array Capabilities


Information Management Software Array Capabilities
8. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator.
9. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator. Refer to the EMC Host Connectivity guide for additional information on Windows iSCSI components and the Microsoft iSCSI Software Initiator usage.
10. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
11. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
12. FC-AL, FC-SW topologies can co-exist on the same server but not on same HBA, provided that different topologies are attached to different HBAs; with the exception of the dual port
A6826A with one port FC-AL and the other port FC-SW.
13. Auto-sensing capability on the HBA is permanently enabled. There is no option to disable auto-sensing on the HBA.
14. The A9782A/A9784A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
15. The A9782A/A9784A fibre channel/GigE combo card only port qualified is fibre channel at this time.
16. The A9782A/A9784A HBA is capable of supporting both 1 and 2 Gb speeds.
17. The A9782A/A9784A the adapter operates in PCI 33 Mhz/66 Mhz and PCI-X 66 Mhz/100Mhz/133Mhz bus speeds with a 64-bit bus width
18. A6826A/A9784A/A9782A hbas: host must be configured as a 64Bit operating system.
19. The AB465A 2port/2Gig fibre channel/GigE combo card only qualified fibre channel port at this time.
20. The AB465A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
21. CLARiiON CX3-40c/CX3-20c requires minimum revision 03.22.xxx.5.50x.

Red Hat RHEL [IBM Power]


Red Hat RHEL [IBM Power]
Information
Operating Management
No. Storage Array System Host Bus Adapter Software Comments
1 Red Hat EMC SAN See16
RHEL [IBM Copy 02.26
Power]: 5.0,
5.1, 5.2, 5.3,
5.4, 5.5
2 Red Hat EMC: 250-048-900, Integrated; EMC SAN
RHEL [IBM Copy 02.26
Power]: 5.0, Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E;
5.1, 5.2, 5.3,
5.4, 5.5 Fujitsu Ltd.: PW008FC2, PW008FC3;
Hewlett Packard: A6795A, A6826A, A9782A8, 9, 10, 11,
12, 13, 14,
A9784A8, 9, 10, 11, 12, 13, 14, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A6, 7;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
3 Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See16
RHEL [IBM LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.263
Power]: 5.0, LP9802-E, LP9802DC-E, LP982-E;
5.1, 5.2, 5.3,
5.4, 5.5 QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
4 Red Hat Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
RHEL [IBM LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 02.263
Power]: 5.0, LPe11002-E-G, LPe1150-E, LPe1150-E-G;
5.1, 5.2, 5.3,
5.4, 5.5 QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLE2360-E-SP, QLE2362-E-SP,
QLE2460-E-SP, QLE2462-E-SP
5 Red Hat Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See16
RHEL [IBM (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 02.26
Power]: 5.0, (LP8000), Dual-port Fibre Channel Adapter for HP
5.1, 5.2, 5.3, Proliant BL20p G2 300874-B21, Dual-port Fibre
5.4, 5.5 Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F)
6 EMC CLARiiON CX300 Red Hat EMC SAN
RHEL [IBM Copy 02.26
Power]: 5.0,
5.1, 5.2, 5.3,
5.4, 5.5
7 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) RHEL [IBM Copy 03.26
Power]: 5.0, Hewlett Packard: A6795A, A6826A, A9782A8, 9, 10, 11,
5.1, 5.2, 5.3, 12, 13, 14, A9784A8, 9, 10, 11, 12, 13, 14, AB378A, AB379A
5.4, 5.5 (QLA2462), AB465A6, 7;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
QLogic QLA2200F-EMC

03/02/2014 62 Information Management Software Array Capabilities


Information Management Software Array Capabilities
8 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) RHEL [IBM LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 03.263
Power]: 5.0, LPe11002-E-G, LPe1150-E, LPe1150-E-G;
5.1, 5.2, 5.3,
5.4, 5.5 QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP, QLE2360-E-SP,
QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
QLE4060C-E-SP, QLE4062C-E-SP
9 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c15, Red Hat EMC SAN See16
CX3-80/CX3-40(F)/CX3-20(F)15 RHEL [IBM Copy 03.26
Power]: 5.0,
5.1, 5.2, 5.3,
5.4, 5.5
10 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c15, Red Hat EMC: 250-048-900, Integrated; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F)15 RHEL [IBM Copy 03.26
Power]: 5.0, Hewlett Packard AB232A (LP9802);
5.1, 5.2, 5.3, NEC: NT2010A-A001 (QLA2340), NTAB232A
5.4, 5.5 (LP9802);
Unisys FCH742313-P64 (LP9802)
11 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c15, Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See16
CX3-80/CX3-40(F)/CX3-20(F)15 RHEL [IBM LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 03.263
Power]: 5.0, LP9802-E, LP9802DC-E, LP982-E;
5.1, 5.2, 5.3,
5.4, 5.5 QLogic: QLA2340-E-SP, QLA2342-E-SP
12 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c15, Red Hat Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See16
CX3-80/CX3-40(F)/CX3-20(F)15 RHEL [IBM (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 03.26
Power]: 5.0, (LP8000), Dual-port Fibre Channel Adapter for HP
5.1, 5.2, 5.3, Proliant BL20p G2 300874-B21, Dual-port Fibre
5.4, 5.5 Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic QLA2310F-E-SP
13 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat EMC SAN See16
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL [IBM Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X17, 18; Power]: 5.0,
5.1, 5.2, 5.3,
EMC Celerra: NS-120, NS-480, NS-9601, 2 5.4, 5.5
14 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL [IBM Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X 17, 18 ; Power]: 5.0, Emulex: LP10000ExDC-E, LP1050Ex-E, LP11000-E,
5.1, 5.2, 5.3, LP11002-E, LP1150-E, LP9002C-E, LPe11000-E,
EMC Celerra: NS-120, NS-480, NS-9601, 2 5.4, 5.5 LPe11000-E-G, LPe11002-E, LPe11002-E-G,
LPe1150-E, LPe1150-E-G;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A6826A, A9782A8, 9, 10, 11,
12, 13, 14,
A9784A8, 9, 10, 11, 12, 13, 14, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A6, 7;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLA4010-E-SP, QLA4010C-E-SP,
QLA4050-E-SP, QLA4050C-E-SP4, 5,
QLA4052C-E-SP4, 5, QLE2360-E-SP, QLE2362-E-SP,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
15 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See16
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL [IBM LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X17, 18; Power]: 5.0, LP9802-E, LP9802DC-E, LP982-E;
5.1, 5.2, 5.3,
EMC Celerra: NS-120, NS-480, NS-9601, 2 5.4, 5.5 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP

03/02/2014 63 Information Management Software Array Capabilities


Information Management Software Array Capabilities
16 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat EMC SAN See16
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL [IBM Copy 04.28
Power]: 5.0,
EMC Celerra: NS-120, NS-480, NS-9601, 2 5.1, 5.2, 5.3,
5.4, 5.5
17 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL [IBM Copy 04.28
Power]: 5.0, Emulex: LP10000ExDC-E, LP1050Ex-E, LP11000-E,
EMC Celerra: NS-120, NS-480, NS-9601, 2 5.1, 5.2, 5.3, LP11002-E, LP1150-E, LP9002C-E, LPe11000-E,
5.4, 5.5 LPe11000-E-G, LPe11002-E, LPe11002-E-G,
LPe1150-E, LPe1150-E-G;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A6826A, A9782A8, 9, 10, 11,
12, 13, 14,
A9784A8, 9, 10, 11, 12, 13, 14, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A6, 7;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227, 6228,
6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLA4010-E-SP, QLA4010C-E-SP,
QLA4050-E-SP, QLA4050C-E-SP4, 5,
QLA4052C-E-SP4, 5, QLE2360-E-SP, QLE2362-E-SP,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
18 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See16
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL [IBM LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.28
Power]: 5.0, LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9601, 2 5.1, 5.2, 5.3,
5.4, 5.5 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
1. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
2. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
3. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
4. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator.
5. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator. Refer to the EMC Host Connectivity guide for additional information on Windows iSCSI components and the Microsoft iSCSI Software Initiator usage.
6. The AB465A 2port/2Gig fibre channel/GigE combo card only qualified fibre channel port at this time.
7. The AB465A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
8. FC-AL, FC-SW topologies can co-exist on the same server but not on same HBA, provided that different topologies are attached to different HBAs; with the exception of the dual port
A6826A with one port FC-AL and the other port FC-SW.
9. Auto-sensing capability on the HBA is permanently enabled. There is no option to disable auto-sensing on the HBA.
10. The A9782A/A9784A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
11. The A9782A/A9784A fibre channel/GigE combo card only port qualified is fibre channel at this time.
12. The A9782A/A9784A HBA is capable of supporting both 1 and 2 Gb speeds.
13. The A9782A/A9784A the adapter operates in PCI 33 Mhz/66 Mhz and PCI-X 66 Mhz/100Mhz/133Mhz bus speeds with a 64-bit bus width
14. A6826A/A9784A/A9782A hbas: host must be configured as a 64Bit operating system.
15. CLARiiON CX3-40c/CX3-20c requires minimum revision 03.22.xxx.5.50x.
16. Windows 2000 hosts running less than SP4 could be susceptible to data loss during LUN expansion operations. This issue is corrected by Microsoft in SP4, or by applying hotfix
327020. See EMC Solution IS emc73538 and Microsoft Knowledge Base article 327020 for more information.
17. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
18. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.

Red Hat RHEL [x86_64]

03/02/2014 64 Information Management Software Array Capabilities


Information Management Software Array Capabilities

Red Hat RHEL [x86_64]


Information
Operating Management
No. Storage Array System Host Bus Adapter Software Comments
1 Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
RHEL LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 02.26
[x86_64] 4.0: LP9802DC-E, LP982-E;
AS/ES, U1
AS/ES, U3 QLogic: QLA2310F-E-SP, QLA2340-E-SP,
AS/ES, U4 QLA2342-E-SP, QLE2360-E-SP, QLE2362-E-SP
AS/ES
2 Red Hat Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E EMC SAN
RHEL Copy 02.26
[x86_64] 4.0:
AS/ES, U1
AS/ES, U3
AS/ES, U4
AS/ES;
Red Hat
RHEL
[x86_64]: 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
3 Red Hat EMC SAN
RHEL Copy 02.26
[x86_64] 4.0:
U2 AS/ES,
U3 AS/ES,
U4 AS/ES
4 Red Hat Hewlett Packard: Dual-port Fibre Channel Adapter for EMC SAN
RHEL HP Proliant BL25p/BL45p 381881-B21, Copy 02.26
[x86_64] 4.0: FCA2214/281541-B21 (QLA2340),
U3 AS/ES, FCA2214DC/321835-B21 (QLA2342);
U4 AS/ES
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic QLA2200F-EMC
5 Red Hat Hewlett Packard A6826A; EMC SAN
RHEL IBM: 00N6881 (QLA2200), 19K1246 (QLA2310) Copy 02.26
[x86_64] 4.0:
U3 AS/ES,
U4 AS/ES;
Red Hat
RHEL
[x86_64]: 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
6 Red Hat EMC SAN See3
RHEL Copy 02.26
[x86_64]: 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
7 Red Hat EMC SAN
RHEL Copy: 02.23,
[x86_64]: 4.5 03.26
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
8 Red Hat EMC: 250-048-900, Integrated; EMC SAN
RHEL Copy 02.26
[x86_64]: 4.5 Fujitsu Ltd.: PW008FC2, PW008FC3;
AS/ES, 4.6
AS/ES, 4.7 Hewlett Packard: A6795A, A9782A12, 13, 14, 15, 16, 17,
AS/ES, 5.0, 18, A9784A12, 13, 14, 15, 16, 17, 18, AB232A (LP9802),
5.1, 5.2 AB378A, AB379A (QLA2462), AB465A10, 11;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
9 Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
RHEL LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.269
[x86_64]: 4.5 LP9802-E, LP9802DC-E, LP982-E;
AS/ES, 4.6
AS/ES, 4.7 QLogic: QLA2310F-E-SP, QLA2340-E-SP,
AS/ES, 5.0, QLA2342-E-SP
5.1, 5.2
10 Red Hat Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
RHEL LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 02.269
[x86_64]: 4.5 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
AS/ES, 4.6
AS/ES, 4.7 QLogic: QLA2200F-EMC, QLA2460-E-SP,
AS/ES, 5.0, QLA2462-E-SP, QLE2360-E-SP, QLE2362-E-SP,
5.1, 5.2 QLE2460-E-SP, QLE2462-E-SP
11 Red Hat Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See3
RHEL (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 02.26
[x86_64]: 4.5 (LP8000), Dual-port Fibre Channel Adapter for HP
AS/ES, 4.6 Proliant BL20p G2 300874-B21, Dual-port Fibre
AS/ES, 4.7 Channel Adapter for HP Proliant BL25p/BL45p
AS/ES, 5.0, 381881-B21, Dual-port Fibre Channel Adapter for HP
5.1, 5.2 Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),

03/02/2014 65 Information Management Software Array Capabilities


Information Management Software Array Capabilities

FCA2408 (LP982), HP QLogic-based Fibre Channel


Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F)
12 EMC CLARiiON: AX4-5, CX3-10c, CX3-40c/CX3-20c, Red Hat EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300; RHEL Copy 02.26
[x86_64]: 4.5
EMC Celerra NX4 (FC) AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
13 EMC CLARiiON: AX4-5, CX300; Red Hat EMC SAN
RHEL Copy 03.26
EMC Celerra NX4 (FC) [x86_64]: 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
14 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) RHEL Copy 03.26
[x86_64] 5.2 Hewlett Packard: A6795A, A6826A, A9782A12, 13, 14,
15, 16, 17, 18, A9784A12, 13, 14, 15, 16, 17, 18, AB378A,
AB379A (QLA2462), AB465A10, 11;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977,
19K1246 (QLA2310), 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
QLogic QLA2200F-EMC
15 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) RHEL LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 03.269
[x86_64] 5.2 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLE2360-E-SP, QLE2362-E-SP, QLE2460-E-SP,
QLE2462-E-SP
16 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat QLogic: QLA4050C-E-SP, QLA4052C-E-SP, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) RHEL QLE4060C-E-SP, QLE4062C-E-SP Copy 03.269
[x86_64]: 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
17 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300 RHEL Copy 02.23
[x86_64]: 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
18 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); RHEL LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 03.26
[x86_64] 4.0: LP9802DC-E, LP982-E;
EMC Celerra: NS20FC20, NS80FC8 AS/ES, U1
AS/ES, U3 QLogic: QLA2310F-E-SP, QLA2340-E-SP,
AS/ES, U4 QLA2342-E-SP, QLE2360-E-SP, QLE2362-E-SP
AS/ES
19 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); RHEL Copy 03.26
[x86_64] 4.0:
EMC Celerra: NS20FC20, NS80FC8 AS/ES, U1
AS/ES, U3
AS/ES, U4
AS/ES;
Red Hat
RHEL
[x86_64]: 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1
20 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); RHEL Copy 03.26
[x86_64] 4.0:
EMC Celerra: NS20FC20, NS80FC8 U2 AS/ES,
U3 AS/ES,
U4 AS/ES
21 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat Hewlett Packard: Dual-port Fibre Channel Adapter for EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); RHEL HP Proliant BL25p/BL45p 381881-B21, Copy 03.26
[x86_64] 4.0: FCA2214/281541-B21 (QLA2340),
EMC Celerra: NS20FC20, NS80FC8 U3 AS/ES, FCA2214DC/321835-B21 (QLA2342);
U4 AS/ES
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836)
22 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat Hewlett Packard A6826A; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); RHEL IBM: 00N6881 (QLA2200), 19K1246 (QLA2310); Copy 03.26
[x86_64] 4.0:
EMC Celerra: NS20FC20, NS80FC8 U3 AS/ES, QLogic QLA2200F-EMC
U4 AS/ES;
Red Hat
RHEL
[x86_64]: 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1

03/02/2014 66 Information Management Software Array Capabilities


Information Management Software Array Capabilities
23 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); RHEL LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 03.269
[x86_64]: 4.5 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
EMC Celerra: NS20FC20, NS80FC8 AS/ES, 4.6
AS/ES, 4.7 QLogic: QLA2460-E-SP, QLA2462-E-SP,
AS/ES, 5.0, QLE2360-E-SP, QLE2362-E-SP, QLE2460-E-SP,
5.1 QLE2462-E-SP
24 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat Hewlett Packard: A6795A, A9782A12, 13, 14, 15, 16, 17, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); RHEL 18, A9784A12, 13, 14, 15, 16, 17, 18, AB378A, AB379A Copy 03.26
[x86_64]: 4.5 (QLA2462), AB465A10, 11;
EMC Celerra: NS20FC20, NS80FC8 AS/ES, 4.6
AS/ES, 4.7 IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
AS/ES, 5.0, 6227, 6228, 6239
5.1
25 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c19, Red Hat EMC SAN See3
CX3-80/CX3-40(F)/CX3-20(F)19 RHEL Copy 03.26
[x86_64] 5.2
26 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c19, Red Hat EMC: 250-048-900, Integrated; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F)19 RHEL Copy 03.26
[x86_64] 5.2 Hewlett Packard AB232A (LP9802);
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
27 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c19, Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
CX3-80/CX3-40(F)/CX3-20(F)19 RHEL LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 03.269
[x86_64] 5.2 LP9802-E, LP9802DC-E, LP982-E;
QLogic: QLA2340-E-SP, QLA2342-E-SP
28 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c19, Red Hat Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See3
CX3-80/CX3-40(F)/CX3-20(F)19 RHEL (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 03.26
[x86_64] 5.2 (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic QLA2310F-E-SP
29 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c19, Red Hat EMC SAN See3
CX3-80/CX3-40(F)/CX3-20(F)19; RHEL Copy 03.26
[x86_64]: 4.5
EMC Celerra: NS20FC20, NS80FC8 AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1
30 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c19, Red Hat EMC: 250-048-900, Integrated; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F)19; RHEL Copy 03.26
[x86_64]: 4.5 Hewlett Packard AB232A (LP9802);
EMC Celerra: NS20FC20, NS80FC8 AS/ES, 4.6 NEC: NT2010A-A001 (QLA2340), NTAB232A
AS/ES, 4.7 (LP9802);
AS/ES, 5.0,
5.1 Unisys FCH742313-P64 (LP9802)
31 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c19, Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
CX3-80/CX3-40(F)/CX3-20(F)19; RHEL LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 03.269
[x86_64]: 4.5 LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS20FC20, NS80FC8 AS/ES, 4.6
AS/ES, 4.7 QLogic: QLA2340-E-SP, QLA2342-E-SP
AS/ES, 5.0,
5.1
32 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c19, Red Hat Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See3
CX3-80/CX3-40(F)/CX3-20(F)19; RHEL (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 03.26
[x86_64]: 4.5 (LP8000), Dual-port Fibre Channel Adapter for HP
EMC Celerra: NS20FC20, NS80FC8 AS/ES, 4.6 Proliant BL20p G2 300874-B21, Dual-port Fibre
AS/ES, 4.7 Channel Adapter for HP Proliant BL25p/BL45p
AS/ES, 5.0, 381881-B21, Dual-port Fibre Channel Adapter for HP
5.1 Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic QLA2310F-E-SP
33 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; [x86_64] 4.0: LP9802DC-E, LP982-E;
AS/ES, U1
EMC Celerra: NS-120, NS-480, NS-9601, 2 AS/ES, U3 QLogic: QLA2310F-E-SP, QLA2340-E-SP,
AS/ES, U4 QLA2342-E-SP
AS/ES
34 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; [x86_64] 4.0: QLogic: QLE2360-E-SP, QLE2362-E-SP
AS/ES, U1
EMC Celerra: NS-120, NS-480, NS-9601, 2 AS/ES, U3
AS/ES, U4
AS/ES;
Red Hat
RHEL

03/02/2014 67 Information Management Software Array Capabilities


Information Management Software Array Capabilities

[x86_64]: 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
35 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; [x86_64] 4.0:
U2 AS/ES,
EMC Celerra: NS-120, NS-480, NS-9601, 2 U3 AS/ES,
U4 AS/ES
36 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Hewlett Packard: Dual-port Fibre Channel Adapter for EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL HP Proliant BL25p/BL45p 381881-B21, Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; [x86_64] 4.0: FCA2214/281541-B21 (QLA2340),
U3 AS/ES, FCA2214DC/321835-B21 (QLA2342);
EMC Celerra: NS-120, NS-480, NS-9601, 2 U4 AS/ES
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836)
37 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Hewlett Packard A6826A; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL IBM: 00N6881 (QLA2200), 19K1246 (QLA2310); Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; [x86_64] 4.0:
U3 AS/ES, QLogic QLA2200F-EMC
EMC Celerra: NS-120, NS-480, NS-9601, 2 U4 AS/ES;
Red Hat
RHEL
[x86_64]: 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
38 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat EMC SAN See3
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; [x86_64]: 4.5
AS/ES, 4.6
EMC Celerra: NS-120, NS-480, NS-9601, 2 AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
39 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; [x86_64]: 4.5 Emulex: LP11000-E, LP11002-E, LP1150-E,
AS/ES, 4.6 LPe11000-E, LPe11000-E-G, LPe11002-E,
EMC Celerra: NS-120, NS-480, NS-9601, 2 AS/ES, 4.7 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
AS/ES, 5.0,
5.1, 5.2 Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A9782A12, 13, 14, 15, 16, 17,
18, A9784A12, 13, 14, 15, 16, 17, 18, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A10, 11;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4010-E-SP, QLA4010C-E-SP, QLA4050-E-SP,
QLA4050C-E-SP4, 5, QLA4052C-E-SP4, 5,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
40 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, RHEL LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; [x86_64]: 4.5 LP9802-E, LP9802DC-E, LP982-E;
AS/ES, 4.6
EMC Celerra: NS-120, NS-480, NS-9601, 2 AS/ES, 4.7 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
AS/ES, 5.0, (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
5.1, 5.2 (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
41 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.28
[x86_64] 4.0: LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9601, 2 AS/ES, U1
AS/ES, U3 QLogic: QLA2310F-E-SP, QLA2340-E-SP,
AS/ES, U4 QLA2342-E-SP
AS/ES
42 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL Copy 04.28
[x86_64] 4.0: QLogic: QLE2360-E-SP, QLE2362-E-SP
EMC Celerra: NS-120, NS-480, NS-9601, 2 AS/ES, U1
AS/ES, U3
AS/ES, U4
AS/ES;
Red Hat
RHEL
[x86_64]: 4.5
AS/ES, 4.6
AS/ES, 4.7

03/02/2014 68 Information Management Software Array Capabilities


Information Management Software Array Capabilities

AS/ES, 5.0,
5.1, 5.2
43 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL Copy 04.28
[x86_64] 4.0:
EMC Celerra: NS-120, NS-480, NS-9601, 2 U2 AS/ES,
U3 AS/ES,
U4 AS/ES
44 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Hewlett Packard: Dual-port Fibre Channel Adapter for EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL HP Proliant BL25p/BL45p 381881-B21, Copy 04.28
[x86_64] 4.0: FCA2214/281541-B21 (QLA2340),
EMC Celerra: NS-120, NS-480, NS-9601, 2 U3 AS/ES, FCA2214DC/321835-B21 (QLA2342);
U4 AS/ES
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836)
45 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Hewlett Packard A6826A; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL IBM: 00N6881 (QLA2200), 19K1246 (QLA2310); Copy 04.28
[x86_64] 4.0:
EMC Celerra: NS-120, NS-480, NS-9601, 2 U3 AS/ES, QLogic QLA2200F-EMC
U4 AS/ES;
Red Hat
RHEL
[x86_64]: 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
46 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat EMC SAN See3
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL Copy 04.28
[x86_64]: 4.5
EMC Celerra: NS-120, NS-480, NS-9601, 2 AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
47 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL Copy 04.28
[x86_64]: 4.5 Emulex: LP11000-E, LP11002-E, LP1150-E,
EMC Celerra: NS-120, NS-480, NS-9601, 2 AS/ES, 4.6 LPe11000-E, LPe11000-E-G, LPe11002-E,
AS/ES, 4.7 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
AS/ES, 5.0,
5.1, 5.2 Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A9782A12, 13, 14, 15, 16, 17,
18, A9784A12, 13, 14, 15, 16, 17, 18, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A10, 11;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4010-E-SP, QLA4010C-E-SP, QLA4050-E-SP,
QLA4050C-E-SP4, 5, QLA4052C-E-SP4, 5,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
48 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; RHEL LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.28
[x86_64]: 4.5 LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9601, 2 AS/ES, 4.6
AS/ES, 4.7 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
AS/ES, 5.0, (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
5.1, 5.2 (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
49 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
RHEL LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 02.23
[x86_64] 4.0: LP9802DC-E, LP982-E;
AS/ES, U1
AS/ES, U3 QLogic: QLA2310F-E-SP, QLA2340-E-SP,
AS/ES, U4 QLA2342-E-SP
AS/ES
50 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
RHEL Copy 02.23
[x86_64] 4.0: QLogic: QLE2360-E-SP, QLE2362-E-SP
AS/ES, U1
AS/ES, U3
AS/ES, U4
AS/ES;
Red Hat
RHEL
[x86_64]: 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2

03/02/2014 69 Information Management Software Array Capabilities


Information Management Software Array Capabilities
51 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat EMC SAN
RHEL Copy 02.23
[x86_64] 4.0:
U2 AS/ES,
U3 AS/ES,
U4 AS/ES
52 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat Hewlett Packard: Dual-port Fibre Channel Adapter for EMC SAN
RHEL HP Proliant BL25p/BL45p 381881-B21, Copy 02.23
[x86_64] 4.0: FCA2214/281541-B21 (QLA2340),
U3 AS/ES, FCA2214DC/321835-B21 (QLA2342);
U4 AS/ES
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836)
53 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat Hewlett Packard A6826A; EMC SAN
RHEL IBM: 00N6881 (QLA2200), 19K1246 (QLA2310); Copy 02.23
[x86_64] 4.0:
U3 AS/ES, QLogic QLA2200F-EMC
U4 AS/ES;
Red Hat
RHEL
[x86_64]: 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
54 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat EMC SAN See3
RHEL Copy 02.23
[x86_64]: 4.5
AS/ES, 4.6
AS/ES, 4.7
AS/ES, 5.0,
5.1, 5.2
55 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat EMC: 250-048-900, Integrated; EMC SAN
RHEL Copy 02.23
[x86_64]: 4.5 Emulex: LP11000-E, LP11002-E, LP1150-E,
AS/ES, 4.6 LPe11000-E, LPe11000-E-G, LPe11002-E,
AS/ES, 4.7 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
AS/ES, 5.0,
5.1, 5.2 Hewlett Packard: A6795A, A9782A12, 13, 14, 15, 16, 17,
18, A9784A12, 13, 14, 15, 16, 17, 18, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A10, 11;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP, QLE2460-E-SP,
QLE2462-E-SP, QLE4060C-E-SP, QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
56 EMC: CLARiiON AX4-5, Celerra NX4 (FC) Red Hat Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
RHEL LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.23
[x86_64]: 4.5 LP9802-E, LP9802DC-E, LP982-E;
AS/ES, 4.6
AS/ES, 4.7 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
AS/ES, 5.0, (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
5.1, 5.2 (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
1. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
2. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
3. Windows 2000 hosts running less than SP4 could be susceptible to data loss during LUN expansion operations. This issue is corrected by Microsoft in SP4, or by applying hotfix
327020. See EMC Solution IS emc73538 and Microsoft Knowledge Base article 327020 for more information.
4. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator.
5. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator. Refer to the EMC Host Connectivity guide for additional information on Windows iSCSI components and the Microsoft iSCSI Software Initiator usage.
6. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
7. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.
8. NS80FC has equivalent array attributes to CX3-80
9. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
10. The AB465A 2port/2Gig fibre channel/GigE combo card only qualified fibre channel port at this time.
11. The AB465A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
12. FC-AL, FC-SW topologies can co-exist on the same server but not on same HBA, provided that different topologies are attached to different HBAs; with the exception of the dual port
A6826A with one port FC-AL and the other port FC-SW.
13. Auto-sensing capability on the HBA is permanently enabled. There is no option to disable auto-sensing on the HBA.
14. The A9782A/A9784A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
15. The A9782A/A9784A fibre channel/GigE combo card only port qualified is fibre channel at this time.
16. The A9782A/A9784A HBA is capable of supporting both 1 and 2 Gb speeds.
17. The A9782A/A9784A the adapter operates in PCI 33 Mhz/66 Mhz and PCI-X 66 Mhz/100Mhz/133Mhz bus speeds with a 64-bit bus width

03/02/2014 70 Information Management Software Array Capabilities


Information Management Software Array Capabilities
18. A6826A/A9784A/A9782A hbas: host must be configured as a 64Bit operating system.
19. CLARiiON CX3-40c/CX3-20c requires minimum revision 03.22.xxx.5.50x.
20. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports

SUSE SLES [32-Bit]


SUSE SLES [32-Bit]
Information
Operating Management
No. Storage Array System Host Bus Adapter Software Comments
1 SUSE SLES EMC SAN See5
[32-Bit] 10 Copy 02.26
SP2
2 SUSE SLES EMC SAN
[32-Bit] 10 Copy: 02.23,
SP2 03.26
3 SUSE SLES EMC: 250-048-900, Integrated; EMC SAN
[32-Bit] 10 Copy 02.26
SP2 Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Hewlett Packard: A6795A, A6826A, A9782A11, 12, 13,
14, 15, 16, 17, A9784A11, 12, 13, 14, 15, 16, 17, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A1, 2;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977,
19K1246 (QLA2310), 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
4 SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See5
[32-Bit] 10 LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.266
SP2 LP9802-E, LP9802DC-E, LP982-E;
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
5 SUSE SLES Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
[32-Bit] 10 LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 02.266
SP2 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLE2360-E-SP, QLE2362-E-SP,
QLE2460-E-SP, QLE2462-E-SP
6 SUSE SLES Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See5
[32-Bit] 10 (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 02.26
SP2 (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101
(LP952), FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F)
7 SUSE SLES EMC SAN
[32-Bit]: 10, Copy 02.26
10 SP1, 9
SP110, 9
SP210, 18, 9
SP310, 9
SP410
8 EMC CLARiiON CX300 SUSE SLES EMC SAN
[32-Bit]: 10, Copy 02.26
10 SP1, 9
SP310, 9
SP410
9 EMC CLARiiON: AX4-5, CX3-10c, CX3-40c/CX3-20c, SUSE SLES EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300; [32-Bit] 10 Copy 02.26
SP2
EMC Celerra NX4 (FC)
10 EMC CLARiiON: AX4-5, CX300; SUSE SLES EMC SAN
[32-Bit] 10 Copy 03.26
EMC Celerra NX4 (FC) SP2
11 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, SUSE SLES Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [32-Bit] 10 Copy 03.26
SP2 Hewlett Packard: A6795A, A6826A, A9782A11, 12, 13,
14, 15, 16, 17, A9784A11, 12, 13, 14, 15, 16, 17, AB378A,
AB379A (QLA2462), AB465A1, 2;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977,
19K1246 (QLA2310), 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
QLogic QLA2200F-EMC
12 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, SUSE SLES Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [32-Bit] 10 LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 03.266
SP2 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP, QLE2360-E-SP,
QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
QLE4060C-E-SP, QLE4062C-E-SP

03/02/2014 71 Information Management Software Array Capabilities


Information Management Software Array Capabilities
13 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, SUSE SLES EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [32-Bit]: 10, Copy 03.26
10 SP1, 9
SP310, 9
SP410
14 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, SUSE SLES EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300 [32-Bit] 10 Copy 02.23
SP2
15 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, SUSE SLES EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [32-Bit] 9: Copy 03.26
SP110,
EMC Celerra: NS20FC21, NS80FC22 SP210, 18
16 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c9, SUSE SLES EMC SAN See5
CX3-80/CX3-40(F)/CX3-20(F)9 [32-Bit] 10 Copy 03.26
SP2
17 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c9, SUSE SLES EMC: 250-048-900, Integrated; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F)9 [32-Bit] 10 Copy 03.26
SP2 Hewlett Packard AB232A (LP9802);
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
18 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c9, SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See5
CX3-80/CX3-40(F)/CX3-20(F)9 [32-Bit] 10 LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 03.266
SP2 LP9802-E, LP9802DC-E, LP982-E;
QLogic: QLA2340-E-SP, QLA2342-E-SP
19 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c9, SUSE SLES Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See5
CX3-80/CX3-40(F)/CX3-20(F)9 [32-Bit] 10 (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 03.26
SP2 (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101
(LP952), FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic QLA2310F-E-SP
20 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES EMC SAN See5
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [32-Bit] 10 Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X7, 8; SP2
EMC Celerra: NS-120, NS-480, NS-9603, 4
21 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [32-Bit] 10 Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X7, 8; SP2 Emulex: LP10000ExDC-E, LP1050Ex-E, LP11000-E,
LP11002-E, LP1150-E, LP9002C-E, LPe11000-E,
EMC Celerra: NS-120, NS-480, NS-9603, 4 LPe11000-E-G, LPe11002-E, LPe11002-E-G,
LPe1150-E, LPe1150-E-G;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A6826A, A9782A11, 12, 13,
14, 15, 16, 17, A9784A11, 12, 13, 14, 15, 16, 17, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A1, 2;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977,
19K1246 (QLA2310), 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLA4010-E-SP, QLA4010C-E-SP,
QLA4050-E-SP, QLA4050C-E-SP19, 20,
QLA4052C-E-SP19, 20, QLE2360-E-SP,
QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
QLE4060C-E-SP, QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
22 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See5
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [32-Bit] 10 LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X7, 8; SP2 LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9603, 4 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101
(LP952), FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP

03/02/2014 72 Information Management Software Array Capabilities


Information Management Software Array Capabilities
23 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [32-Bit]: 10, Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X7, 8; 10 SP1, 9
SP110, 9
EMC Celerra: NS-120, NS-480, NS-9603, 4 SP210, 18, 9
SP310, 9
SP410
24 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES EMC SAN See5
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [32-Bit] 10 Copy 04.28
SP2
EMC Celerra: NS-120, NS-480, NS-9603, 4
25 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [32-Bit] 10 Copy 04.28
SP2 Emulex: LP10000ExDC-E, LP1050Ex-E, LP11000-E,
EMC Celerra: NS-120, NS-480, NS-9603, 4 LP11002-E, LP1150-E, LP9002C-E, LPe11000-E,
LPe11000-E-G, LPe11002-E, LPe11002-E-G,
LPe1150-E, LPe1150-E-G;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A6826A, A9782A11, 12, 13,
14, 15, 16, 17, A9784A11, 12, 13, 14, 15, 16, 17, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A1, 2;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977,
19K1246 (QLA2310), 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLA4010-E-SP, QLA4010C-E-SP,
QLA4050-E-SP, QLA4050C-E-SP19, 20,
QLA4052C-E-SP19, 20, QLE2360-E-SP,
QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
QLE4060C-E-SP, QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
26 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See5
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [32-Bit] 10 LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.28
SP2 LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9603, 4
Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101
(LP952), FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
27 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [32-Bit]: 10, Copy 04.28
10 SP1, 9
EMC Celerra: NS-120, NS-480, NS-9603, 4 SP110, 9
SP210, 18, 9
SP310, 9
SP410
28 EMC: CLARiiON AX4-5, Celerra NX4 (FC) SUSE SLES EMC SAN See5
[32-Bit] 10 Copy 02.23
SP2
29 EMC: CLARiiON AX4-5, Celerra NX4 (FC) SUSE SLES EMC: 250-048-900, Integrated; EMC SAN
[32-Bit] 10 Copy 02.23
SP2 Emulex: LP10000ExDC-E, LP1050Ex-E, LP11000-E,
LP11002-E, LP1150-E, LP9002C-E, LPe11000-E,
LPe11000-E-G, LPe11002-E, LPe11002-E-G,
LPe1150-E, LPe1150-E-G;
Hewlett Packard: A6795A, A6826A, A9782A11, 12, 13,
14, 15, 16, 17, A9784A11, 12, 13, 14, 15, 16, 17, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A1, 2;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977,
19K1246 (QLA2310), 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLA4050C-E-SP, QLA4052C-E-SP,
QLE2360-E-SP, QLE2362-E-SP, QLE2460-E-SP,
QLE2462-E-SP, QLE4060C-E-SP, QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
30 EMC: CLARiiON AX4-5, Celerra NX4 (FC) SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See5
[32-Bit] 10 LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.23
SP2 LP9802-E, LP9802DC-E, LP982-E;
Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101

03/02/2014 73 Information Management Software Array Capabilities


Information Management Software Array Capabilities

(LP952), FCA2214/281541-B21 (QLA2340),


FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
31 EMC: CLARiiON AX4-5, Celerra NX4 (FC) SUSE SLES EMC SAN
[32-Bit]: 10, Copy 02.23
10 SP1, 9
SP110, 9
SP210, 18, 9
SP310, 9
SP410
1. The AB465A 2port/2Gig fibre channel/GigE combo card only qualified fibre channel port at this time.
2. The AB465A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
3. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
4. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
5. Windows 2000 hosts running less than SP4 could be susceptible to data loss during LUN expansion operations. This issue is corrected by Microsoft in SP4, or by applying hotfix
327020. See EMC Solution IS emc73538 and Microsoft Knowledge Base article 327020 for more information.
6. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
7. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
8. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.
9. CLARiiON CX3-40c/CX3-20c requires minimum revision 03.22.xxx.5.50x.
10. In accordance with the SUSE Linux Enterprise Product Support Lifecycle Policy, the regular 7 year life-cycle of SUSE Linux Enterprise Server 9 will end on August 31, 2011. All SLES
9 configurations in the ESM will be frozen as of the publication of the August 2011 ESM. At this time, SLES 9 will no longer be publicly supported and will require an extended support
contract from Novell in order for the SLES 9 configuration in the ESM to be supported by EMC. Extended and Self-Support from Novell is planned to end August 31, 2014.
11. FC-AL, FC-SW topologies can co-exist on the same server but not on same HBA, provided that different topologies are attached to different HBAs; with the exception of the dual port
A6826A with one port FC-AL and the other port FC-SW.
12. Auto-sensing capability on the HBA is permanently enabled. There is no option to disable auto-sensing on the HBA.
13. The A9782A/A9784A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
14. The A9782A/A9784A fibre channel/GigE combo card only port qualified is fibre channel at this time.
15. The A9782A/A9784A HBA is capable of supporting both 1 and 2 Gb speeds.
16. The A9782A/A9784A the adapter operates in PCI 33 Mhz/66 Mhz and PCI-X 66 Mhz/100Mhz/133Mhz bus speeds with a 64-bit bus width
17. A6826A/A9784A/A9782A hbas: host must be configured as a 64Bit operating system.
18. Novell OES is only supported with Fibre channel connectivity.
19. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator.
20. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator. Refer to the EMC Host Connectivity guide for additional information on Windows iSCSI components and the Microsoft iSCSI Software Initiator usage.
21. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
22. NS80FC has equivalent array attributes to CX3-80

SUSE SLES [IA64]


SUSE SLES [IA64]
Information
Operating Management
No. Storage Array System Host Bus Adapter Software Comments
1 SUSE SLES EMC SAN See2
[IA64] 10 Copy 02.26
SP2
2 SUSE SLES EMC SAN
[IA64] 10 Copy: 02.23,
SP2 03.26
3 SUSE SLES EMC: 250-048-900, Integrated; EMC SAN
[IA64] 10 Copy 02.26
SP2 Fujitsu Ltd.: PW008FC2, PW008FC3;
Hewlett Packard: A6795A, A9782A12, 13, 14, 15, 16, 17,
18, A9784A12, 13, 14, 15, 16, 17, 18, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A7, 8;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
4 SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See2
[IA64] 10 LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.261
SP2 LP9802-E, LP9802DC-E, LP982-E;
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
5 SUSE SLES Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
[IA64] 10 LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 02.261
SP2 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLE2360-E-SP, QLE2362-E-SP,
QLE2460-E-SP, QLE2462-E-SP

03/02/2014 74 Information Management Software Array Capabilities


Information Management Software Array Capabilities
6 SUSE SLES Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See2
[IA64] 10 (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 02.26
SP2 (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F)
7 SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
[IA64] 9 LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 02.26
SP36 LP9802DC-E, LP982-E;
Hewlett Packard: Dual-port Fibre Channel Adapter for
HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2200F-EMC, QLA2310F-E-SP,
QLA2340-E-SP, QLA2342-E-SP, QLE2360-E-SP,
QLE2362-E-SP
8 SUSE SLES Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
[IA64]: 10 Copy 02.26
SP2, 9 SP36 Hewlett Packard A6826A;
IBM: 00N6881 (QLA2200), 19K1246 (QLA2310)
9 SUSE SLES EMC SAN
[IA64]: 10, 10 Copy 02.26
SP1, 9 SP16,
9 SP26, 9
SP36, 9
SP46
10 EMC CLARiiON CX300 SUSE SLES EMC SAN
[IA64]: 10, 10 Copy 02.26
SP1, 9 SP36,
9 SP46
11 EMC CLARiiON: AX4-5, CX3-10c, CX3-40c/CX3-20c, SUSE SLES EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300; [IA64] 10 Copy 02.26
SP2
EMC Celerra NX4 (FC)
12 EMC CLARiiON: AX4-5, CX300; SUSE SLES EMC SAN
[IA64] 10 Copy 03.26
EMC Celerra NX4 (FC) SP2
13 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, SUSE SLES Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [IA64] 10 Copy 03.26
SP2 Hewlett Packard: A6795A, A6826A, A9782A12, 13, 14,
15, 16, 17, 18, A9784A12, 13, 14, 15, 16, 17, 18, AB378A,
AB379A (QLA2462), AB465A7, 8;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977, 19K1246
(QLA2310), 5716, 5758, 5759, 5773, 5774, 6227,
6228, 6239;
QLogic QLA2200F-EMC
14 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, SUSE SLES Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [IA64] 10 LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 03.261
SP2 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP, QLE2360-E-SP,
QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
QLE4060C-E-SP, QLE4062C-E-SP
15 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, SUSE SLES EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [IA64]: 10, 10 Copy 03.26
SP1, 9 SP46
16 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, SUSE SLES EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300 [IA64] 10 Copy 02.23
SP2
17 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP10000ExDC-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [IA64] 9 LP1050-E, LP1050DC-E, LP1050Ex-E, LP9002-E Copy 03.26
SP36 (LP9002L-E), LP9002C-E, LP9802-E, LP9802DC-E,
EMC Celerra: NS20FC11, NS80FC21 LP982-E;
Hewlett Packard: A6826A, Dual-port Fibre Channel
Adapter for HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 00N6881 (QLA2200), 19K1246 (QLA2310),
24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2200F-EMC, QLA2310F-E-SP,
QLA2340-E-SP, QLA2342-E-SP, QLE2360-E-SP,
QLE2362-E-SP
18 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, SUSE SLES EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [IA64] 9: Copy 03.26
SP16, SP26,
EMC Celerra: NS20FC11, NS80FC21 SP36

03/02/2014 75 Information Management Software Array Capabilities


Information Management Software Array Capabilities
19 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c3, SUSE SLES EMC SAN See2
CX3-80/CX3-40(F)/CX3-20(F)3 [IA64] 10 Copy 03.26
SP2
20 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c3, SUSE SLES EMC: 250-048-900, Integrated; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F)3 [IA64] 10 Copy 03.26
SP2 Hewlett Packard AB232A (LP9802);
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
21 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c3, SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See2
CX3-80/CX3-40(F)/CX3-20(F)3 [IA64] 10 LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 03.261
SP2 LP9802-E, LP9802DC-E, LP982-E;
QLogic: QLA2340-E-SP, QLA2342-E-SP
22 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c3, SUSE SLES Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See2
CX3-80/CX3-40(F)/CX3-20(F)3 [IA64] 10 (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 03.26
SP2 (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic QLA2310F-E-SP
23 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES EMC SAN See2
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IA64] 10 Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X9, 10; SP2
EMC Celerra: NS-120, NS-480, NS-9604, 5
24 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IA64] 10 Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X9, 10; SP2 Emulex: LP11000-E, LP11002-E, LP1150-E,
LPe11000-E, LPe11000-E-G, LPe11002-E,
EMC Celerra: NS-120, NS-480, NS-9604, 5 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A9782A12, 13, 14, 15, 16, 17,
18, A9784A12, 13, 14, 15, 16, 17, 18, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A7, 8;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4010-E-SP, QLA4010C-E-SP, QLA4050-E-SP,
QLA4050C-E-SP19, 20, QLA4052C-E-SP19, 20,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
25 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See2
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IA64] 10 LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X9, 10; SP2 LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9604, 5 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
26 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IA64] 9 LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X9, 10; SP36 LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9604, 5 Hewlett Packard: Dual-port Fibre Channel Adapter for
HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP

03/02/2014 76 Information Management Software Array Capabilities


Information Management Software Array Capabilities
27 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IA64]: 10 Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X9, 10; SP2, 9 SP36 Hewlett Packard A6826A;
IBM: 00N6881 (QLA2200), 19K1246 (QLA2310);
EMC Celerra: NS-120, NS-480, NS-9604, 5
QLogic: QLA2200F-EMC, QLE2360-E-SP,
QLE2362-E-SP
28 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IA64]: 10, 10 Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X9, 10; SP1, 9 SP16,
9 SP26, 9
EMC Celerra: NS-120, NS-480, NS-9604, 5 SP36, 9
SP46
29 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES EMC SAN See2
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IA64] 10 Copy 04.28
SP2
EMC Celerra: NS-120, NS-480, NS-9604, 5
30 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IA64] 10 Copy 04.28
SP2 Emulex: LP11000-E, LP11002-E, LP1150-E,
EMC Celerra: NS-120, NS-480, NS-9604, 5 LPe11000-E, LPe11000-E-G, LPe11002-E,
LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A9782A12, 13, 14, 15, 16, 17,
18, A9784A12, 13, 14, 15, 16, 17, 18, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A7, 8;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4010-E-SP, QLA4010C-E-SP, QLA4050-E-SP,
QLA4050C-E-SP19, 20, QLA4052C-E-SP19, 20,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
31 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See2
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IA64] 10 LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.28
SP2 LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9604, 5
Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
32 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IA64] 9 LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 04.28
SP36 LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9604, 5
Hewlett Packard: Dual-port Fibre Channel Adapter for
HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
33 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IA64]: 10 Copy 04.28
SP2, 9 SP36 Hewlett Packard A6826A;
EMC Celerra: NS-120, NS-480, NS-9604, 5 IBM: 00N6881 (QLA2200), 19K1246 (QLA2310);
QLogic: QLA2200F-EMC, QLE2360-E-SP,
QLE2362-E-SP
34 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IA64]: 10, 10 Copy 04.28
SP1, 9 SP16,
EMC Celerra: NS-120, NS-480, NS-9604, 5 9 SP26, 9
SP36, 9
SP46
35 EMC: CLARiiON AX4-5, Celerra NX4 (FC) SUSE SLES EMC SAN See2
[IA64] 10 Copy 02.23
SP2
36 EMC: CLARiiON AX4-5, Celerra NX4 (FC) SUSE SLES EMC: 250-048-900, Integrated; EMC SAN
[IA64] 10 Copy 02.23
SP2 Emulex: LP11000-E, LP11002-E, LP1150-E,
LPe11000-E, LPe11000-E-G, LPe11002-E,
LPe11002-E-G, LPe1150-E, LPe1150-E-G;
Hewlett Packard: A6795A, A9782A12, 13, 14, 15, 16, 17,
18, A9784A12, 13, 14, 15, 16, 17, 18, AB232A (LP9802),
AB378A, AB379A (QLA2462), AB465A7, 8;
IBM: 1905, 1910, 1977, 5716, 5758, 5759, 5773, 5774,

03/02/2014 77 Information Management Software Array Capabilities


Information Management Software Array Capabilities

6227, 6228, 6239;


NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP, QLE2460-E-SP,
QLE2462-E-SP, QLE4060C-E-SP, QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
37 EMC: CLARiiON AX4-5, Celerra NX4 (FC) SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See2
[IA64] 10 LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.23
SP2 LP9802-E, LP9802DC-E, LP982-E;
Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
38 EMC: CLARiiON AX4-5, Celerra NX4 (FC) SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN
[IA64] 9 LP1050DC-E, LP9002-E (LP9002L-E), LP9802-E, Copy 02.23
SP36 LP9802DC-E, LP982-E;
Hewlett Packard: Dual-port Fibre Channel Adapter for
HP Proliant BL25p/BL45p 381881-B21,
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342);
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
39 EMC: CLARiiON AX4-5, Celerra NX4 (FC) SUSE SLES Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
[IA64]: 10 Copy 02.23
SP2, 9 SP36 Hewlett Packard A6826A;
IBM: 00N6881 (QLA2200), 19K1246 (QLA2310);
QLogic: QLA2200F-EMC, QLE2360-E-SP,
QLE2362-E-SP
40 EMC: CLARiiON AX4-5, Celerra NX4 (FC) SUSE SLES EMC SAN
[IA64]: 10, 10 Copy 02.23
SP1, 9 SP16,
9 SP26, 9
SP36, 9
SP46
1. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
2. Windows 2000 hosts running less than SP4 could be susceptible to data loss during LUN expansion operations. This issue is corrected by Microsoft in SP4, or by applying hotfix
327020. See EMC Solution IS emc73538 and Microsoft Knowledge Base article 327020 for more information.
3. CLARiiON CX3-40c/CX3-20c requires minimum revision 03.22.xxx.5.50x.
4. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
5. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
6. In accordance with the SUSE Linux Enterprise Product Support Lifecycle Policy, the regular 7 year life-cycle of SUSE Linux Enterprise Server 9 will end on August 31, 2011. All SLES
9 configurations in the ESM will be frozen as of the publication of the August 2011 ESM. At this time, SLES 9 will no longer be publicly supported and will require an extended support
contract from Novell in order for the SLES 9 configuration in the ESM to be supported by EMC. Extended and Self-Support from Novell is planned to end August 31, 2014.
7. The AB465A 2port/2Gig fibre channel/GigE combo card only qualified fibre channel port at this time.
8. The AB465A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
9. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
10. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.
11. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
12. FC-AL, FC-SW topologies can co-exist on the same server but not on same HBA, provided that different topologies are attached to different HBAs; with the exception of the dual port
A6826A with one port FC-AL and the other port FC-SW.
13. Auto-sensing capability on the HBA is permanently enabled. There is no option to disable auto-sensing on the HBA.
14. The A9782A/A9784A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
15. The A9782A/A9784A fibre channel/GigE combo card only port qualified is fibre channel at this time.
16. The A9782A/A9784A HBA is capable of supporting both 1 and 2 Gb speeds.
17. The A9782A/A9784A the adapter operates in PCI 33 Mhz/66 Mhz and PCI-X 66 Mhz/100Mhz/133Mhz bus speeds with a 64-bit bus width
18. A6826A/A9784A/A9782A hbas: host must be configured as a 64Bit operating system.
19. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator.
20. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator. Refer to the EMC Host Connectivity guide for additional information on Windows iSCSI components and the Microsoft iSCSI Software Initiator usage.
21. NS80FC has equivalent array attributes to CX3-80

SUSE SLES [IBM Power]

03/02/2014 78 Information Management Software Array Capabilities


Information Management Software Array Capabilities

SUSE SLES [IBM Power]


Information
Operating Management
No. Storage Array System Host Bus Adapter Software Comments
1 SUSE SLES EMC SAN See16
[IBM Power]: Copy 02.26
10, 10 SP1,
10 SP2, 10
SP3, 11, 11
SP1
2 SUSE SLES EMC: 250-048-900, Integrated; EMC SAN
[IBM Power]: Copy 02.26
10, 10 SP1, Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E;
10 SP2, 10
SP3, 11, 11 Fujitsu Ltd.: PW008FC2, PW008FC3;
SP1
Hewlett Packard: A6795A, A6826A, A9782A8, 9, 10, 11,
12, 13, 14, A9784A8, 9, 10, 11, 12, 13, 14, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A6, 7;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977,
19K1246 (QLA2310), 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
3 SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See16
[IBM Power]: LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.263
10, 10 SP1, LP9802-E, LP9802DC-E, LP982-E;
10 SP2, 10
SP3, 11, 11 QLogic: QLA2310F-E-SP, QLA2340-E-SP,
SP1 QLA2342-E-SP
4 SUSE SLES Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
[IBM Power]: LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 02.263
10, 10 SP1, LPe11002-E-G, LPe1150-E, LPe1150-E-G;
10 SP2, 10
SP3, 11, 11 QLogic: QLA2200F-EMC, QLA2460-E-SP,
SP1 QLA2462-E-SP, QLE2360-E-SP, QLE2362-E-SP,
QLE2460-E-SP, QLE2462-E-SP
5 SUSE SLES Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See16
[IBM Power]: (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 02.26
10, 10 SP1, (LP8000), Dual-port Fibre Channel Adapter for HP
10 SP2, 10 Proliant BL20p G2 300874-B21, Dual-port Fibre
SP3, 11, 11 Channel Adapter for HP Proliant BL25p/BL45p
SP1 381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F)
6 EMC CLARiiON CX300 SUSE SLES EMC SAN
[IBM Power]: Copy 02.26
10, 10 SP1,
10 SP2, 10
SP3, 11, 11
SP1
7 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, SUSE SLES Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [IBM Power]: Copy 03.26
10, 10 SP1, Hewlett Packard: A6795A, A6826A, A9782A8, 9, 10, 11,
10 SP2, 10 12, 13, 14, A9784A8, 9, 10, 11, 12, 13, 14, AB378A,
SP3, 11, 11 AB379A (QLA2462), AB465A6, 7;
SP1
IBM: 00N6881 (QLA2200), 1905, 1910, 1977,
19K1246 (QLA2310), 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
QLogic QLA2200F-EMC
8 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, SUSE SLES Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [IBM Power]: LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 03.263
10, 10 SP1, LPe11002-E-G, LPe1150-E, LPe1150-E-G;
10 SP2, 10
SP3, 11, 11 QLogic: QLA2460-E-SP, QLA2462-E-SP,
SP1 QLA4050C-E-SP, QLA4052C-E-SP, QLE2360-E-SP,
QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
QLE4060C-E-SP, QLE4062C-E-SP
9 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c15, SUSE SLES EMC SAN See16
CX3-80/CX3-40(F)/CX3-20(F)15 [IBM Power]: Copy 03.26
10, 10 SP1,
10 SP2, 10
SP3, 11, 11
SP1
10 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c15, SUSE SLES EMC: 250-048-900, Integrated; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F)15 [IBM Power]: Copy 03.26
10, 10 SP1, Hewlett Packard AB232A (LP9802);
10 SP2, 10 NEC: NT2010A-A001 (QLA2340), NTAB232A
SP3, 11, 11 (LP9802);
SP1
Unisys FCH742313-P64 (LP9802)

03/02/2014 79 Information Management Software Array Capabilities


Information Management Software Array Capabilities
11 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c15, SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See16
CX3-80/CX3-40(F)/CX3-20(F)15 [IBM Power]: LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 03.263
10, 10 SP1, LP9802-E, LP9802DC-E, LP982-E;
10 SP2, 10
SP3, 11, 11 QLogic: QLA2340-E-SP, QLA2342-E-SP
SP1
12 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c15, SUSE SLES Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See16
CX3-80/CX3-40(F)/CX3-20(F)15 [IBM Power]: (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 03.26
10, 10 SP1, (LP8000), Dual-port Fibre Channel Adapter for HP
10 SP2, 10 Proliant BL20p G2 300874-B21, Dual-port Fibre
SP3, 11, 11 Channel Adapter for HP Proliant BL25p/BL45p
SP1 381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic QLA2310F-E-SP
13 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES EMC SAN See16
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IBM Power]: Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X17, 18; 10, 10 SP1,
10 SP2, 10
EMC Celerra: NS-120, NS-480, NS-9601, 2 SP3, 11, 11
SP1
14 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IBM Power]: Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X17, 18; 10, 10 SP1, Emulex: LP10000ExDC-E, LP1050Ex-E, LP11000-E,
10 SP2, 10 LP11002-E, LP1150-E, LP9002C-E, LPe11000-E,
EMC Celerra: NS-120, NS-480, NS-9601, 2 SP3, 11, 11 LPe11000-E-G, LPe11002-E, LPe11002-E-G,
SP1 LPe1150-E, LPe1150-E-G;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A6826A, A9782A8, 9, 10, 11,
12, 13, 14,
A9784A8, 9, 10, 11, 12, 13, 14, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A6, 7;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977,
19K1246 (QLA2310), 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLA4010-E-SP, QLA4010C-E-SP,
QLA4050-E-SP, QLA4050C-E-SP4, 5,
QLA4052C-E-SP4, 5, QLE2360-E-SP, QLE2362-E-SP,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
15 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See16
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [IBM Power]: LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X17, 18; 10, 10 SP1, LP9802-E, LP9802DC-E, LP982-E;
10 SP2, 10
EMC Celerra: NS-120, NS-480, NS-9601, 2 SP3, 11, 11 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
SP1 (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
16 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES EMC SAN See16
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IBM Power]: Copy 04.28
10, 10 SP1,
EMC Celerra: NS-120, NS-480, NS-9601, 2 10 SP2, 10
SP3, 11, 11
SP1
17 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IBM Power]: Copy 04.28
10, 10 SP1, Emulex: LP10000ExDC-E, LP1050Ex-E, LP11000-E,
EMC Celerra: NS-120, NS-480, NS-9601, 2 10 SP2, 10 LP11002-E, LP1150-E, LP9002C-E, LPe11000-E,
SP3, 11, 11 LPe11000-E-G, LPe11002-E, LPe11002-E-G,
SP1 LPe1150-E, LPe1150-E-G;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A6826A, A9782A8, 9, 10, 11,
12, 13, 14,
A9784A8, 9, 10, 11, 12, 13, 14, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A6, 7;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977,
19K1246 (QLA2310), 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;

03/02/2014 80 Information Management Software Array Capabilities


Information Management Software Array Capabilities

NEC: NT2010A-A001 (QLA2340), NTAB232A


(LP9802);
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLA4010-E-SP, QLA4010C-E-SP,
QLA4050-E-SP, QLA4050C-E-SP4, 5,
QLA4052C-E-SP4, 5, QLE2360-E-SP, QLE2362-E-SP,
QLE2460-E-SP, QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
18 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See16
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IBM Power]: LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.28
10, 10 SP1, LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9601, 2 10 SP2, 10
SP3, 11, 11 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
SP1 (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
1. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
2. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
3. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
4. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator.
5. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator. Refer to the EMC Host Connectivity guide for additional information on Windows iSCSI components and the Microsoft iSCSI Software Initiator usage.
6. The AB465A 2port/2Gig fibre channel/GigE combo card only qualified fibre channel port at this time.
7. The AB465A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
8. FC-AL, FC-SW topologies can co-exist on the same server but not on same HBA, provided that different topologies are attached to different HBAs; with the exception of the dual port
A6826A with one port FC-AL and the other port FC-SW.
9. Auto-sensing capability on the HBA is permanently enabled. There is no option to disable auto-sensing on the HBA.
10. The A9782A/A9784A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
11. The A9782A/A9784A fibre channel/GigE combo card only port qualified is fibre channel at this time.
12. The A9782A/A9784A HBA is capable of supporting both 1 and 2 Gb speeds.
13. The A9782A/A9784A the adapter operates in PCI 33 Mhz/66 Mhz and PCI-X 66 Mhz/100Mhz/133Mhz bus speeds with a 64-bit bus width
14. A6826A/A9784A/A9782A hbas: host must be configured as a 64Bit operating system.
15. CLARiiON CX3-40c/CX3-20c requires minimum revision 03.22.xxx.5.50x.
16. Windows 2000 hosts running less than SP4 could be susceptible to data loss during LUN expansion operations. This issue is corrected by Microsoft in SP4, or by applying hotfix
327020. See EMC Solution IS emc73538 and Microsoft Knowledge Base article 327020 for more information.
17. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
18. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.

SUSE SLES [x86_64]


SUSE SLES [x86_64]
Information
Operating Management
No. Storage Array System Host Bus Adapter Software Comments
1 SUSE SLES EMC SAN See3
[x86_64] 10 Copy 02.26
SP2
2 SUSE SLES EMC SAN
[x86_64] 10 Copy: 02.23,
SP2 03.26
3 SUSE SLES EMC: 250-048-900, Integrated; EMC SAN
[x86_64] 10 Copy 02.26
SP2 Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Hewlett Packard: A6795A, A6826A, A9782A11, 12, 13,
14, 15, 16, 17, A9784A11, 12, 13, 14, 15, 16, 17, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A1, 2;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977,
19K1246 (QLA2310), 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)

03/02/2014 81 Information Management Software Array Capabilities


Information Management Software Array Capabilities
4 SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
[x86_64] 10 LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.269
SP2 LP9802-E, LP9802DC-E, LP982-E;
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
5 SUSE SLES Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
[x86_64] 10 LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 02.269
SP2 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLE2360-E-SP, QLE2362-E-SP,
QLE2460-E-SP, QLE2462-E-SP
6 SUSE SLES Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See3
[x86_64] 10 (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 02.26
SP2 (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F)
7 SUSE SLES EMC SAN
[x86_64]: 10, Copy 02.26
10 SP1, 9
SP110, 9
SP210, 9
SP310, 9
SP410
8 EMC CLARiiON CX300 SUSE SLES EMC SAN
[x86_64]: 10, Copy 02.26
10 SP1, 9
SP310, 9
SP410
9 EMC CLARiiON: AX4-5, CX3-10c, CX3-40c/CX3-20c, SUSE SLES EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300; [x86_64] 10 Copy 02.26
SP2
EMC Celerra NX4 (FC)
10 EMC CLARiiON: AX4-5, CX300; SUSE SLES EMC SAN
[x86_64] 10 Copy 03.26
EMC Celerra NX4 (FC) SP2
11 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, SUSE SLES Emulex: LP10000ExDC-E, LP1050Ex-E, LP9002C-E; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [x86_64] 10 Copy 03.26
SP2 Hewlett Packard: A6795A, A6826A, A9782A11, 12, 13,
14, 15, 16, 17, A9784A11, 12, 13, 14, 15, 16, 17, AB378A,
AB379A (QLA2462), AB465A1, 2;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977,
19K1246 (QLA2310), 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
QLogic QLA2200F-EMC
12 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, SUSE SLES Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [x86_64] 10 LPe11000-E, LPe11000-E-G, LPe11002-E, Copy 03.269
SP2 LPe11002-E-G, LPe1150-E, LPe1150-E-G;
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP, QLE2360-E-SP,
QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
QLE4060C-E-SP, QLE4062C-E-SP
13 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, SUSE SLES EMC SAN
CX3-80/CX3-40(F)/CX3-20(F) [x86_64]: 10, Copy 03.26
10 SP1, 9
SP310, 9
SP410
14 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, SUSE SLES EMC SAN
CX3-80/CX3-40(F)/CX3-20(F), CX300 [x86_64] 10 Copy 02.23
SP2
15 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, SUSE SLES EMC SAN
CX3-80/CX3-40(F)/CX3-20(F); [x86_64] 9: Copy 03.26
SP110,
EMC Celerra: NS20FC20, NS80FC21 SP210
16 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c8, SUSE SLES EMC SAN See3
CX3-80/CX3-40(F)/CX3-20(F)8 [x86_64] 10 Copy 03.26
SP2
17 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c8, SUSE SLES EMC: 250-048-900, Integrated; EMC SAN
CX3-80/CX3-40(F)/CX3-20(F)8 [x86_64] 10 Copy 03.26
SP2 Hewlett Packard AB232A (LP9802);
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
Unisys FCH742313-P64 (LP9802)
18 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c8, SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
CX3-80/CX3-40(F)/CX3-20(F)8 [x86_64] 10 LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 03.269
SP2 LP9802-E, LP9802DC-E, LP982-E;
QLogic: QLA2340-E-SP, QLA2342-E-SP

03/02/2014 82 Information Management Software Array Capabilities


Information Management Software Array Capabilities
19 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c8, SUSE SLES Hewlett Packard: A7298A (LP982), DS-KGPSA-CA EMC SAN See3
CX3-80/CX3-40(F)/CX3-20(F)8 [x86_64] 10 (LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY Copy 03.26
SP2 (LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic QLA2310F-E-SP
20 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES EMC SAN See3
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [x86_64] 10 Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; SP2
EMC Celerra: NS-120, NS-480, NS-9604, 5
21 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [x86_64] 10 Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; SP2 Emulex: LP10000ExDC-E, LP1050Ex-E, LP11000-E,
LP11002-E, LP1150-E, LP9002C-E, LPe11000-E,
EMC Celerra: NS-120, NS-480, NS-9604, 5 LPe11000-E-G, LPe11002-E, LPe11002-E-G,
LPe1150-E, LPe1150-E-G;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A6826A, A9782A11, 12, 13,
14, 15, 16, 17, A9784A11, 12, 13, 14, 15, 16, 17, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A1, 2;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977,
19K1246 (QLA2310), 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLA4010-E-SP, QLA4010C-E-SP,
QLA4050-E-SP, QLA4050C-E-SP18, 19,
QLA4052C-E-SP18, 19, QLE2360-E-SP,
QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
QLE4060C-E-SP, QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
22 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [x86_64] 10 LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; SP2 LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9604, 5 Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
23 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, [x86_64]: 10, Copy 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X6, 7; 10 SP1, 9
SP110, 9
EMC Celerra: NS-120, NS-480, NS-9604, 5 SP210, 9
SP310, 9
SP410
24 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES EMC SAN See3
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [x86_64] 10 Copy 04.28
SP2
EMC Celerra: NS-120, NS-480, NS-9604, 5
25 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES EMC: 250-048-900, Integrated; EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [x86_64] 10 Copy 04.28
SP2 Emulex: LP10000ExDC-E, LP1050Ex-E, LP11000-E,
EMC Celerra: NS-120, NS-480, NS-9604, 5 LP11002-E, LP1150-E, LP9002C-E, LPe11000-E,
LPe11000-E-G, LPe11002-E, LPe11002-E-G,
LPe1150-E, LPe1150-E-G;
Fujitsu Ltd.: PW008FC2, PW008FC3;
Generic Vendor NIC: 10/100, GbE;
Hewlett Packard: A6795A, A6826A, A9782A11, 12, 13,
14, 15, 16, 17, A9784A11, 12, 13, 14, 15, 16, 17, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A1, 2;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977,
19K1246 (QLA2310), 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A

03/02/2014 83 Information Management Software Array Capabilities


Information Management Software Array Capabilities

(LP9802);
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLA4010-E-SP, QLA4010C-E-SP,
QLA4050-E-SP, QLA4050C-E-SP18, 19,
QLA4052C-E-SP18, 19, QLE2360-E-SP,
QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
QLE4060C-E-SP, QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
26 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [x86_64] 10 LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 04.28
SP2 LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9604, 5
Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
27 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES EMC SAN
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [x86_64]: 10, Copy 04.28
10 SP1, 9
EMC Celerra: NS-120, NS-480, NS-9604, 5 SP110, 9
SP210, 9
SP310, 9
SP410
28 EMC: CLARiiON AX4-5, Celerra NX4 (FC) SUSE SLES EMC SAN See3
[x86_64] 10 Copy 02.23
SP2
29 EMC: CLARiiON AX4-5, Celerra NX4 (FC) SUSE SLES EMC: 250-048-900, Integrated; EMC SAN
[x86_64] 10 Copy 02.23
SP2 Emulex: LP10000ExDC-E, LP1050Ex-E, LP11000-E,
LP11002-E, LP1150-E, LP9002C-E, LPe11000-E,
LPe11000-E-G, LPe11002-E, LPe11002-E-G,
LPe1150-E, LPe1150-E-G;
Hewlett Packard: A6795A, A6826A, A9782A11, 12, 13,
14, 15, 16, 17, A9784A11, 12, 13, 14, 15, 16, 17, AB232A
(LP9802), AB378A, AB379A (QLA2462), AB465A1, 2;
IBM: 00N6881 (QLA2200), 1905, 1910, 1977,
19K1246 (QLA2310), 5716, 5758, 5759, 5773, 5774,
6227, 6228, 6239;
NEC: NT2010A-A001 (QLA2340), NTAB232A
(LP9802);
QLogic: QLA2200F-EMC, QLA2460-E-SP,
QLA2462-E-SP, QLA4050C-E-SP, QLA4052C-E-SP,
QLE2360-E-SP, QLE2362-E-SP, QLE2460-E-SP,
QLE2462-E-SP, QLE4060C-E-SP, QLE4062C-E-SP;
Unisys FCH742313-P64 (LP9802)
30 EMC: CLARiiON AX4-5, Celerra NX4 (FC) SUSE SLES Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN See3
[x86_64] 10 LP1050DC-E, LP8000-EMC, LP9002-E (LP9002L-E), Copy 02.23
SP2 LP9802-E, LP9802DC-E, LP982-E;
Hewlett Packard: A7298A (LP982), DS-KGPSA-CA
(LP8000), DS-KGPSA-CB (LP8000), DS-KGPSA-CY
(LP8000), Dual-port Fibre Channel Adapter for HP
Proliant BL20p G2 300874-B21, Dual-port Fibre
Channel Adapter for HP Proliant BL25p/BL45p
381881-B21, Dual-port Fibre Channel Adapter for HP
Proliant BL30p/BL35p 354054-B21, FCA2101 (LP952),
FCA2214/281541-B21 (QLA2340),
FCA2214DC/321835-B21 (QLA2342), FCA2354
(LP9002), FCA2355 (LP9002DC), FCA2384 (LP9802),
FCA2404 (LP9802), FCA2404DC (LP9802DC),
FCA2408 (LP982), HP QLogic-based Fibre Channel
Mezzanine HBA for BL20p G3/BL20p G4 361426-B21;
IBM: 24P0960 (QLA2340), HS20 FC Exp Card
(13N2203/26R0836);
NEC: N8103-200 (LP850), N8190-105 (LP952),
N8503-200 (LP850), N8803-031 (QLA2310F);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
31 EMC: CLARiiON AX4-5, Celerra NX4 (FC) SUSE SLES EMC SAN
[x86_64]: 10, Copy 02.23
10 SP1, 9
SP110, 9
SP210, 9
SP310, 9
SP410
1. The AB465A 2port/2Gig fibre channel/GigE combo card only qualified fibre channel port at this time.
2. The AB465A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
3. Windows 2000 hosts running less than SP4 could be susceptible to data loss during LUN expansion operations. This issue is corrected by Microsoft in SP4, or by applying hotfix
327020. See EMC Solution IS emc73538 and Microsoft Knowledge Base article 327020 for more information.
4. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
5. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
6. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
7. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.
8. CLARiiON CX3-40c/CX3-20c requires minimum revision 03.22.xxx.5.50x.
9.

03/02/2014 84 Information Management Software Array Capabilities


Information Management Software Array Capabilities
Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
10. In accordance with the SUSE Linux Enterprise Product Support Lifecycle Policy, the regular 7 year life-cycle of SUSE Linux Enterprise Server 9 will end on August 31, 2011. All SLES
9 configurations in the ESM will be frozen as of the publication of the August 2011 ESM. At this time, SLES 9 will no longer be publicly supported and will require an extended support
contract from Novell in order for the SLES 9 configuration in the ESM to be supported by EMC. Extended and Self-Support from Novell is planned to end August 31, 2014.
11. FC-AL, FC-SW topologies can co-exist on the same server but not on same HBA, provided that different topologies are attached to different HBAs; with the exception of the dual port
A6826A with one port FC-AL and the other port FC-SW.
12. Auto-sensing capability on the HBA is permanently enabled. There is no option to disable auto-sensing on the HBA.
13. The A9782A/A9784A are 3.3 volt only cards and are keyed for 3.3 volt I/O slots, which means they only fit in 3.3 volt I/O slots.
14. The A9782A/A9784A fibre channel/GigE combo card only port qualified is fibre channel at this time.
15. The A9782A/A9784A HBA is capable of supporting both 1 and 2 Gb speeds.
16. The A9782A/A9784A the adapter operates in PCI 33 Mhz/66 Mhz and PCI-X 66 Mhz/100Mhz/133Mhz bus speeds with a 64-bit bus width
17. A6826A/A9784A/A9782A hbas: host must be configured as a 64Bit operating system.
18. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator.
19. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator. Refer to the EMC Host Connectivity guide for additional information on Windows iSCSI components and the Microsoft iSCSI Software Initiator usage.
20. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
21. NS80FC has equivalent array attributes to CX3-80

VMware ESX
VMware ESX
Information
Management
No. Storage Array Operating System Host Bus Adapter Software
1 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, VMware ESX: 3.53, QLogic: QLA4050C-E-SP, QLA4052C-E-SP, EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F) 4.0 (vSphere 4)3, 6, QLE4060C-E-SP, QLE4062C-E-SP 03.261
7, 4.1 (vSphere 4)3,
6, 7, 8, 9, 10, 11, 12

2 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, VMware ESX: 4.0 Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F) (vSphere 4)3, 6, 7, LP8000-EMC, LP9002-E (LP9002L-E), 03.261
4.1 (vSphere 4)3, 6, LP9802-E, LP9802DC-E, LP982-E, LPe11000-E,
7, 8, 9, 10, 11, 12 LPe11000-E-G, LPe11002-E, LPe11002-E-G,
LPe1150-E, LPe1150-E-G;
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLE2360-E-SP, QLE2362-E-SP, QLE2460-E-SP,
QLE2462-E-SP
3 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, VMware ESX 3.53 Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN Copy:
CX3-80/CX3-40(F)/CX3-20(F); LP1050DC-E, LP11000-E, LP11002-E, 03.241, 03.261
LP1150-E, LP8000-EMC, LP9002-E
EMC Celerra: NS20FC15, NS80FC2 (LP9002L-E), LP9802-E, LP9802DC-E, LP982-E,
LPe11000-E, LPe11000-E-G, LPe11002-E,
LPe11002-E-G, LPe1150-E, LPe1150-E-G;
QLogic: QLA2340-E-SP, QLA2342-E-SP,
QLA2460-E-SP, QLA2462-E-SP, QLE2360-E-SP,
QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP
4 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, VMware ESX 3.53 Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, LP1050DC-E; 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X13, 14;
QLogic: QLA2200F-EMC, QLA2310F-E-SP,
EMC Celerra: NS-120, NS-480, NS-9604, 5 QLA2340-E-SP, QLA2342-E-SP
5 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, VMware ESX: 3.53, Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, 4.0 (vSphere 4)3, 6, LP8000-EMC, LP9002-E (LP9002L-E), 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X13, 14; 7, 4.1 (vSphere 4)3, LP9802-E, LP9802DC-E, LP982-E, LPe11000-E,
6, 7, 8, 9, 10, 11, 12 LPe11000-E-G, LPe11002-E, LPe11002-E-G,
EMC Celerra: NS-120, NS-480, NS-9604, 5 LPe1150-E, LPe1150-E-G;
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP,
QLE2360-E-SP, QLE2362-E-SP, QLE2460-E-SP,
QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP
6 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, VMware ESX 3.53 Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; LP1050DC-E; 04.28
EMC Celerra: NS-120, NS-480, NS-9604, 5 QLogic: QLA2200F-EMC, QLA2310F-E-SP,
QLA2340-E-SP, QLA2342-E-SP
7 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, VMware ESX: 3.53, Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; 4.0 (vSphere 4)3, 6, LP8000-EMC, LP9002-E (LP9002L-E), 04.28
7, 4.1 (vSphere 4)3, LP9802-E, LP9802DC-E, LP982-E, LPe11000-E,
EMC Celerra: NS-120, NS-480, NS-9604, 5 6, 7, 8, 9, 10, 11, 12 LPe11000-E-G, LPe11002-E, LPe11002-E-G,
LPe1150-E, LPe1150-E-G;
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP,
QLE2360-E-SP, QLE2362-E-SP, QLE2460-E-SP,
QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP
8 EMC: CLARiiON AX4-5, Celerra NX4 (FC) VMware ESX 3.53 Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN Copy
LP1050DC-E, LP11000-E, LP11002-E, 02.23
LP1150-E, LP8000-EMC, LP9002-E
(LP9002L-E), LP9802-E, LP9802DC-E, LP982-E,
LPe11000-E, LPe11000-E-G, LPe11002-E,
LPe11002-E-G, LPe1150-E, LPe1150-E-G;
QLogic: QLA2340-E-SP, QLA2342-E-SP,
QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP,
QLE2360-E-SP, QLE2362-E-SP, QLE2460-E-SP,
QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP
1. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.

03/02/2014 85 Information Management Software Array Capabilities


Information Management Software Array Capabilities
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
2. NS80FC has equivalent array attributes to CX3-80
3. For a list of supported guest operating systems, refer to http://www.vmware.com/resources/compatibility/search.php?deviceCategory=software. For additional information refer to the
Guest Operating System Installation Guide at http://www.vmware.com/pdf/GuestOS_guide.pdf
4. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
5. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
6. For information on VMware VAAI (VMware vStorage APIs for Array Integration) support with EMC storage, and details on array firmware versions that support VAAI please refer to
the Storage/SAN section of the VMware Hardware Compatibility Guide at http://www.vmware.com/resources/compatibility/search.php.
7. EMC supports VMware's recommendations for number of nodes in native ESX cluster configurations.
8. Oracle RAC 11g R2 is supported on Red Hat RHEL 5 and Microsoft Windows Virtual Machines running on VMware vSphere 4.1 with EMC storage platforms. For details, refer to
http://vmware.com/support/policies/oracle-support.html
9. Supported with vMotion.
10. Oracle Database 11g R1 is supported on VMware vSphere 4.0 Virtual Machines with Symmetrix, CLARiiON, and Celerra storage platforms. For details, refer to
http://www.vmware.com/solutions/partners/alliances/oracle.html.
11. Supports 2-node Microsoft Cluster Services (MSCS) with Windows 2003 and Windows 2008 virtual machines in CIB (Cluster in Box) and CAB (Cluster across Boxes) configurations.
VMware NMP (Native Multipathing) and PowerPath/VE are supported with MSCS.
The following SCSI Controllers are supported with VMWare and MSCS:
Windows 2000 Server LSI Logic Parallel, Windows Server 2003 LSI Logic Parallel, Windows Server 2008 LSI Logic Parallel.
You must download the LSI Logic Parallel driver for Windows 2000 Server on the LSI Web site.
12. All released updates to ESX version are supported unless otherwise specified by a footnote. Please contact server vendor for the update level required for a specific server.
13. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
14. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.
15. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports

VMware ESXi
VMware ESXi
Information
Management
No. Storage Array Operating System Host Bus Adapter Software
1 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, VMware ESXi: 3.53, QLogic: QLA4050C-E-SP, QLA4052C-E-SP, EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F) 4.0 (vSphere 4)1, 2, QLE4060C-E-SP, QLE4062C-E-SP 03.266
3, 4.1 (vSphere 4)1,
2, 3, 11, 12, 13, 14, 15

2 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, VMware ESXi: 4.0 Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F) (vSphere 4)1, 2, 3, LP8000-EMC, LP9002-E (LP9002L-E), 03.266
4.1 (vSphere 4)1, 2, LP9802-E, LP9802DC-E, LP982-E, LPe11000-E,
3, 11, 12, 13, 14, 15 LPe11000-E-G, LPe11002-E, LPe11002-E-G,
LPe1150-E, LPe1150-E-G;
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLE2360-E-SP, QLE2362-E-SP, QLE2460-E-SP,
QLE2462-E-SP
3 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, VMware ESXi 3.53 Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN Copy:
CX3-80/CX3-40(F)/CX3-20(F); LP1050DC-E, LP11000-E, LP11002-E, 03.246, 03.266
LP1150-E, LP8000-EMC, LP9002-E
EMC Celerra: NS20FC7, NS80FC8 (LP9002L-E), LP9802-E, LP9802DC-E, LP982-E,
LPe11000-E, LPe11000-E-G, LPe11002-E,
LPe11002-E-G, LPe1150-E, LPe1150-E-G;
QLogic: QLA2340-E-SP, QLA2342-E-SP,
QLA2460-E-SP, QLA2462-E-SP, QLE2360-E-SP,
QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP
4 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, VMware ESXi 3.53 Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, LP1050DC-E; 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X9, 10;
QLogic: QLA2200F-EMC, QLA2310F-E-SP,
EMC Celerra: NS-120, NS-480, NS-9604, 5 QLA2340-E-SP, QLA2342-E-SP
5 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, VMware ESXi: 3.53, Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, 4.0 (vSphere 4)1, 2, LP8000-EMC, LP9002-E (LP9002L-E), 04.29
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X9, 10; 3, 4.1 (vSphere 4)1, LP9802-E, LP9802DC-E, LP982-E, LPe11000-E,
2, 3, 11, 12, 13, 14, 15 LPe11000-E-G, LPe11002-E, LPe11002-E-G,
EMC Celerra: NS-120, NS-480, NS-9604, 5 LPe1150-E, LPe1150-E-G;
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP,
QLE2360-E-SP, QLE2362-E-SP, QLE2460-E-SP,
QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP
6 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, VMware ESXi 3.53 Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; LP1050DC-E; 04.28
EMC Celerra: NS-120, NS-480, NS-9604, 5 QLogic: QLA2200F-EMC, QLA2310F-E-SP,
QLA2340-E-SP, QLA2342-E-SP
7 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, VMware ESXi: 3.53, Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; 4.0 (vSphere 4)1, 2, LP8000-EMC, LP9002-E (LP9002L-E), 04.28
3, 4.1 (vSphere 4)1, LP9802-E, LP9802DC-E, LP982-E, LPe11000-E,
EMC Celerra: NS-120, NS-480, NS-9604, 5 2, 3, 11, 12, 13, 14, 15 LPe11000-E-G, LPe11002-E, LPe11002-E-G,
LPe1150-E, LPe1150-E-G;
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP,
QLE2360-E-SP, QLE2362-E-SP, QLE2460-E-SP,
QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP
8 EMC: CLARiiON AX4-5, Celerra NX4 (FC) VMware ESXi 3.53 Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN Copy
LP1050DC-E, LP11000-E, LP11002-E, 02.23
LP1150-E, LP8000-EMC, LP9002-E
(LP9002L-E), LP9802-E, LP9802DC-E, LP982-E,
LPe11000-E, LPe11000-E-G, LPe11002-E,
LPe11002-E-G, LPe1150-E, LPe1150-E-G;
QLogic: QLA2340-E-SP, QLA2342-E-SP,
QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP,
QLE2360-E-SP, QLE2362-E-SP, QLE2460-E-SP,
QLE2462-E-SP, QLE4060C-E-SP,
QLE4062C-E-SP
1. For information on VMware VAAI (VMware vStorage APIs for Array Integration) support with EMC storage, and details on array firmware versions that support VAAI please refer to
the Storage/SAN section of the VMware Hardware Compatibility Guide at http://www.vmware.com/resources/compatibility/search.php.
2. EMC supports VMware's recommendations for number of nodes in native ESX cluster configurations.

03/02/2014 86 Information Management Software Array Capabilities


Information Management Software Array Capabilities
3. For a list of supported guest operating systems, refer to http://www.vmware.com/resources/compatibility/search.php?deviceCategory=software. For additional information refer to the
Guest Operating System Installation Guide at http://www.vmware.com/pdf/GuestOS_guide.pdf
4. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
5. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
6. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
7. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
8. NS80FC has equivalent array attributes to CX3-80
9. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
10. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.
11. Oracle RAC 11g R2 is supported on Red Hat RHEL 5 and Microsoft Windows Virtual Machines running on VMware vSphere 4.1 with EMC storage platforms. For details, refer to
http://vmware.com/support/policies/oracle-support.html
12. Supported with vMotion.
13. Oracle Database 11g R1 is supported on VMware vSphere 4.0 Virtual Machines with Symmetrix, CLARiiON, and Celerra storage platforms. For details, refer to
http://www.vmware.com/solutions/partners/alliances/oracle.html.
14. Supports 2-node Microsoft Cluster Services (MSCS) with Windows 2003 and Windows 2008 virtual machines in CIB (Cluster in Box) and CAB (Cluster across Boxes) configurations.
VMware NMP (Native Multipathing) and PowerPath/VE are supported with MSCS.
The following SCSI Controllers are supported with VMWare and MSCS:
Windows 2000 Server LSI Logic Parallel, Windows Server 2003 LSI Logic Parallel, Windows Server 2008 LSI Logic Parallel.
You must download the LSI Logic Parallel driver for Windows 2000 Server on the LSI Web site.
15. All released updates to ESX version are supported unless otherwise specified by a footnote. Please contact server vendor for the update level required for a specific server.

03/02/2014 87 Information Management Software Array Capabilities


Third Party Copy
Configuration Notes

Describes the support statements for 3rd party copy software with arrays from various vendors. The CX3-40c/CX3-20c support from these tables is only
through the Fibre Channel ports on the array.
Asianux AX [32-Bit]
Asianux AX [32-Bit]
No. Storage Array Operating System Information Management Software
1 EMC CLARiiON CX300 Asianux AX [32-Bit]: 1.0 SP1, EMC SAN Copy 02.241, 2, 3, 4, 5, 6, 7, 8
2.0 GA
2 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, CX3-80/CX3-40(F)/CX3-20(F); Asianux AX [32-Bit]: 1.0 SP1, EMC SAN Copy 03.241, 2, 3, 6, 8
2.0 GA
EMC Celerra: NS20FC9, NS80FC12
3 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX [32-Bit]: 1.0 SP1, EMC SAN Copy 04.28
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; 2.0 GA
EMC Celerra: NS-120, NS-480, NS-96010, 11
1. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
2. Replicas of application data volumes of physical (native) servers created using SnapView, MirrorView and SAN Copy can be presented to a VMware ESX Server. These replicas
configured on the VMware ESX server must be Raw Device Mapping only (VMFS is not supported). Replicas of application data volumes configured as Raw Device Mapping
volumes on a VMware ESX server can also be presented to a physical (native) server.
Replication of Operating System volumes and application volumes from a physical to virtual or virtual to physical environment using CLARiiON replication software is not supported at
this time. Replication of Operating System volumes, application volumes and application data volumes from a virtual to virtual environment using CLARiiON replication software is
supported.
3. Requires admHost software. See SAN Copy release notice for appropriate revision information.
4. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) The VMFS replica must be assigned to a different ESX server. The target ESX server must not already have access to the original source VMFS volume.
6) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
7) RDM volumes cannot be created when the ESX server is booting from SAN. VMFS volumes can be created when the ESX server is booting from SAN. If ESX server is not booting
from SAN, Virtual Machines can be configured using either VMFS or RDM volumes.
8) Ensure the snapshot is activated or clone fractured before presenting them to an ESX server.
9) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
10) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
11) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
5. SAN Copy installation is supported on CX700, CX500, CX600, CX400, FC4700, and FC4700-2 storage arrays. Data movement is supported in and between CX series arrays,
FC4500, FC4700, FC4700-2, FC5300, Symmetrix 8000 series, Symmetrix DMX Series, Symmetrix 3832, Symmetrix 3x30, and Symmetrix 3700 arrays. The last version to support
SAN Copy to/from FC4700, FC4700-2, FC4500 and FC5300 arrays is 02.19.xxx.5.030.
6. Data movement between CLARiiON and Symmetrix requires Navisphere host agent attached to Symmetrix. Agents supported are Windows, SUN, HP/UX, AIX, and Linux
7. SAN Copy installation is supported on CX700, CX600, CX500, CX400, FC4700, and FC4700-2 storage arrays. Data movement is supported with the following HP, IBM, HDS, and
SUN storage arrays. HP storage arrays: Storage Works RAID Array products (HSG80 controller): RA8000 with Firmware levels 8.5, 8.6 and 8.7; ESA12000 with Firmware levels 8.5,
8.6 and 8.7; MA8000 with Firmware levels 8.5, 8.6 and 8.7; EMA12000 with Firmware levels 8.5, 8.6 and 8.7; EMA16000 with Firmware levels 8.5, 8.6 and 8.7; EVA4000 (HSV200
controller), EVA6000 (HSV200 Controller), EVA8000 (HSV210 controller), EVA3000 (HSV100 controller) and EVA5000 (HSV110 controller) with Firmware levels 2 and 3; and
MSA-1000 with Firmware version 2.38. IBM storage arrays: FAStT200 with Firmware levels 5.30.XX.XX and 5.20.XX.XX; FAStT500 with Firmware levels 5.30.XX.XX, 5.21.XX.XX,
and 5.20.XX.XX; FAStT600 with Firmware level 5.30.XX.XX; FAStT700 with Firmware levels 5.30.XX.XX, 5.21.XX.XX, and 5.20.XX.XX; and FAStT900 with Firmware level
5.30.XX.XX; DS4500, DS4400, DS4300, DS4100; 2105-F20, 2105-E20, 2105-800. HDS storage arrays: 9980, 9970, 9960, 9920, and HP OEM models: XP512, XP1024, XP128.
SUN storage arrays: StorEdge T3 with Firmware level 1.18.02, and StorEdge T3+ with Firmware 2.01.03.
8. SAN Copy Operational restrictions apply when using SAN Copy with Clusters and AIX Systems. Refer to the SAN Copy release notice for more information.
9. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
10. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
11. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
12. NS80FC has equivalent array attributes to CX3-80

Asianux AX [EM64T]
Asianux AX [EM64T]
No. Storage Array Operating System Information Management Software
1 EMC CLARiiON CX300 Asianux AX [EM64T] 1.0 EMC SAN Copy 02.242, 3, 4, 5, 6, 10, 11, 12
GA
2 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, CX3-80/CX3-40(F)/CX3-20(F); Asianux AX [EM64T] 1.0 EMC SAN Copy 03.242, 3, 4, 5, 6
GA
EMC Celerra: NS20FC1, NS80FC7
3 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX [EM64T] 1.0 EMC SAN Copy 04.28
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; GA
EMC Celerra: NS-120, NS-480, NS-9608, 9
1. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
2. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
3.

03/02/2014 88 Third Party Copy


Third Party Copy
Replicas of application data volumes of physical (native) servers created using SnapView, MirrorView and SAN Copy can be presented to a VMware ESX Server. These replicas
configured on the VMware ESX server must be Raw Device Mapping only (VMFS is not supported). Replicas of application data volumes configured as Raw Device Mapping
volumes on a VMware ESX server can also be presented to a physical (native) server.
Replication of Operating System volumes and application volumes from a physical to virtual or virtual to physical environment using CLARiiON replication software is not supported at
this time. Replication of Operating System volumes, application volumes and application data volumes from a virtual to virtual environment using CLARiiON replication software is
supported.
4. Requires admHost software. See SAN Copy release notice for appropriate revision information.
5. Data movement between CLARiiON and Symmetrix requires Navisphere host agent attached to Symmetrix. Agents supported are Windows, SUN, HP/UX, AIX, and Linux
6. SAN Copy Operational restrictions apply when using SAN Copy with Clusters and AIX Systems. Refer to the SAN Copy release notice for more information.
7. NS80FC has equivalent array attributes to CX3-80
8. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
9. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
10. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) The VMFS replica must be assigned to a different ESX server. The target ESX server must not already have access to the original source VMFS volume.
6) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
7) RDM volumes cannot be created when the ESX server is booting from SAN. VMFS volumes can be created when the ESX server is booting from SAN. If ESX server is not booting
from SAN, Virtual Machines can be configured using either VMFS or RDM volumes.
8) Ensure the snapshot is activated or clone fractured before presenting them to an ESX server.
9) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
10) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
11) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
11. SAN Copy installation is supported on CX700, CX500, CX600, CX400, FC4700, and FC4700-2 storage arrays. Data movement is supported in and between CX series arrays,
FC4500, FC4700, FC4700-2, FC5300, Symmetrix 8000 series, Symmetrix DMX Series, Symmetrix 3832, Symmetrix 3x30, and Symmetrix 3700 arrays. The last version to support
SAN Copy to/from FC4700, FC4700-2, FC4500 and FC5300 arrays is 02.19.xxx.5.030.
12. SAN Copy installation is supported on CX700, CX600, CX500, CX400, FC4700, and FC4700-2 storage arrays. Data movement is supported with the following HP, IBM, HDS, and
SUN storage arrays. HP storage arrays: Storage Works RAID Array products (HSG80 controller): RA8000 with Firmware levels 8.5, 8.6 and 8.7; ESA12000 with Firmware levels 8.5,
8.6 and 8.7; MA8000 with Firmware levels 8.5, 8.6 and 8.7; EMA12000 with Firmware levels 8.5, 8.6 and 8.7; EMA16000 with Firmware levels 8.5, 8.6 and 8.7; EVA4000 (HSV200
controller), EVA6000 (HSV200 Controller), EVA8000 (HSV210 controller), EVA3000 (HSV100 controller) and EVA5000 (HSV110 controller) with Firmware levels 2 and 3; and
MSA-1000 with Firmware version 2.38. IBM storage arrays: FAStT200 with Firmware levels 5.30.XX.XX and 5.20.XX.XX; FAStT500 with Firmware levels 5.30.XX.XX, 5.21.XX.XX,
and 5.20.XX.XX; FAStT600 with Firmware level 5.30.XX.XX; FAStT700 with Firmware levels 5.30.XX.XX, 5.21.XX.XX, and 5.20.XX.XX; and FAStT900 with Firmware level
5.30.XX.XX; DS4500, DS4400, DS4300, DS4100; 2105-F20, 2105-E20, 2105-800. HDS storage arrays: 9980, 9970, 9960, 9920, and HP OEM models: XP512, XP1024, XP128.
SUN storage arrays: StorEdge T3 with Firmware level 1.18.02, and StorEdge T3+ with Firmware 2.01.03.

Asianux AX [IA64]
Asianux AX [IA64]
Information Management
No. Storage Array Operating System Software
1 EMC CLARiiON CX300 Asianux AX [IA64] 1.0 GA EMC SAN Copy 02.241, 2, 3, 4,
5, 10, 11, 12

2 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, CX3-80/CX3-40(F)/CX3-20(F); Asianux AX [IA64] 1.0 GA EMC SAN Copy 03.241, 2, 3, 4,
5
EMC Celerra: NS20FC6, NS80FC7
3 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX [IA64] 1.0 GA EMC SAN Copy 04.28
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8;
EMC Celerra: NS-120, NS-480, NS-9608, 9
1. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
2. Replicas of application data volumes of physical (native) servers created using SnapView, MirrorView and SAN Copy can be presented to a VMware ESX Server. These replicas
configured on the VMware ESX server must be Raw Device Mapping only (VMFS is not supported). Replicas of application data volumes configured as Raw Device Mapping
volumes on a VMware ESX server can also be presented to a physical (native) server.
Replication of Operating System volumes and application volumes from a physical to virtual or virtual to physical environment using CLARiiON replication software is not supported at
this time. Replication of Operating System volumes, application volumes and application data volumes from a virtual to virtual environment using CLARiiON replication software is
supported.
3. Requires admHost software. See SAN Copy release notice for appropriate revision information.
4. Data movement between CLARiiON and Symmetrix requires Navisphere host agent attached to Symmetrix. Agents supported are Windows, SUN, HP/UX, AIX, and Linux
5. SAN Copy Operational restrictions apply when using SAN Copy with Clusters and AIX Systems. Refer to the SAN Copy release notice for more information.
6. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
7. NS80FC has equivalent array attributes to CX3-80
8. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
9. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
10. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) The VMFS replica must be assigned to a different ESX server. The target ESX server must not already have access to the original source VMFS volume.
6) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
7) RDM volumes cannot be created when the ESX server is booting from SAN. VMFS volumes can be created when the ESX server is booting from SAN. If ESX server is not booting
from SAN, Virtual Machines can be configured using either VMFS or RDM volumes.
8) Ensure the snapshot is activated or clone fractured before presenting them to an ESX server.
9) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
10) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
11) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
11. SAN Copy installation is supported on CX700, CX500, CX600, CX400, FC4700, and FC4700-2 storage arrays. Data movement is supported in and between CX series arrays,
FC4500, FC4700, FC4700-2, FC5300, Symmetrix 8000 series, Symmetrix DMX Series, Symmetrix 3832, Symmetrix 3x30, and Symmetrix 3700 arrays. The last version to support
SAN Copy to/from FC4700, FC4700-2, FC4500 and FC5300 arrays is 02.19.xxx.5.030.
12. SAN Copy installation is supported on CX700, CX600, CX500, CX400, FC4700, and FC4700-2 storage arrays. Data movement is supported with the following HP, IBM, HDS, and
SUN storage arrays. HP storage arrays: Storage Works RAID Array products (HSG80 controller): RA8000 with Firmware levels 8.5, 8.6 and 8.7; ESA12000 with Firmware levels 8.5,
8.6 and 8.7; MA8000 with Firmware levels 8.5, 8.6 and 8.7; EMA12000 with Firmware levels 8.5, 8.6 and 8.7; EMA16000 with Firmware levels 8.5, 8.6 and 8.7; EVA4000 (HSV200
controller), EVA6000 (HSV200 Controller), EVA8000 (HSV210 controller), EVA3000 (HSV100 controller) and EVA5000 (HSV110 controller) with Firmware levels 2 and 3; and
MSA-1000 with Firmware version 2.38. IBM storage arrays: FAStT200 with Firmware levels 5.30.XX.XX and 5.20.XX.XX; FAStT500 with Firmware levels 5.30.XX.XX, 5.21.XX.XX,
and 5.20.XX.XX; FAStT600 with Firmware level 5.30.XX.XX; FAStT700 with Firmware levels 5.30.XX.XX, 5.21.XX.XX, and 5.20.XX.XX; and FAStT900 with Firmware level
5.30.XX.XX; DS4500, DS4400, DS4300, DS4100; 2105-F20, 2105-E20, 2105-800. HDS storage arrays: 9980, 9970, 9960, 9920, and HP OEM models: XP512, XP1024, XP128.
SUN storage arrays: StorEdge T3 with Firmware level 1.18.02, and StorEdge T3+ with Firmware 2.01.03.

03/02/2014 89 Third Party Copy


Third Party Copy

Asianux AX [x86_64]
Asianux AX [x86_64]
No. Storage Array Operating System Information Management Software
1 EMC CLARiiON CX300 Asianux AX [x86_64] 2.0 EMC SAN Copy 02.243, 4, 5, 6, 7, 10, 11, 12
GA
2 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, CX3-80/CX3-40(F)/CX3-20(F); Asianux AX [x86_64] 2.0 EMC SAN Copy 03.243, 4, 5, 6, 7
GA
EMC Celerra: NS20FC9, NS80FC8
3 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Asianux AX [x86_64] 2.0 EMC SAN Copy 04.28
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; GA
EMC Celerra: NS-120, NS-480, NS-9601, 2
1. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
2. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
3. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
4. Replicas of application data volumes of physical (native) servers created using SnapView, MirrorView and SAN Copy can be presented to a VMware ESX Server. These replicas
configured on the VMware ESX server must be Raw Device Mapping only (VMFS is not supported). Replicas of application data volumes configured as Raw Device Mapping
volumes on a VMware ESX server can also be presented to a physical (native) server.
Replication of Operating System volumes and application volumes from a physical to virtual or virtual to physical environment using CLARiiON replication software is not supported at
this time. Replication of Operating System volumes, application volumes and application data volumes from a virtual to virtual environment using CLARiiON replication software is
supported.
5. Requires admHost software. See SAN Copy release notice for appropriate revision information.
6. Data movement between CLARiiON and Symmetrix requires Navisphere host agent attached to Symmetrix. Agents supported are Windows, SUN, HP/UX, AIX, and Linux
7. SAN Copy Operational restrictions apply when using SAN Copy with Clusters and AIX Systems. Refer to the SAN Copy release notice for more information.
8. NS80FC has equivalent array attributes to CX3-80
9. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
10. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) The VMFS replica must be assigned to a different ESX server. The target ESX server must not already have access to the original source VMFS volume.
6) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
7) RDM volumes cannot be created when the ESX server is booting from SAN. VMFS volumes can be created when the ESX server is booting from SAN. If ESX server is not booting
from SAN, Virtual Machines can be configured using either VMFS or RDM volumes.
8) Ensure the snapshot is activated or clone fractured before presenting them to an ESX server.
9) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
10) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
11) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
11. SAN Copy installation is supported on CX700, CX500, CX600, CX400, FC4700, and FC4700-2 storage arrays. Data movement is supported in and between CX series arrays,
FC4500, FC4700, FC4700-2, FC5300, Symmetrix 8000 series, Symmetrix DMX Series, Symmetrix 3832, Symmetrix 3x30, and Symmetrix 3700 arrays. The last version to support
SAN Copy to/from FC4700, FC4700-2, FC4500 and FC5300 arrays is 02.19.xxx.5.030.
12. SAN Copy installation is supported on CX700, CX600, CX500, CX400, FC4700, and FC4700-2 storage arrays. Data movement is supported with the following HP, IBM, HDS, and
SUN storage arrays. HP storage arrays: Storage Works RAID Array products (HSG80 controller): RA8000 with Firmware levels 8.5, 8.6 and 8.7; ESA12000 with Firmware levels 8.5,
8.6 and 8.7; MA8000 with Firmware levels 8.5, 8.6 and 8.7; EMA12000 with Firmware levels 8.5, 8.6 and 8.7; EMA16000 with Firmware levels 8.5, 8.6 and 8.7; EVA4000 (HSV200
controller), EVA6000 (HSV200 Controller), EVA8000 (HSV210 controller), EVA3000 (HSV100 controller) and EVA5000 (HSV110 controller) with Firmware levels 2 and 3; and
MSA-1000 with Firmware version 2.38. IBM storage arrays: FAStT200 with Firmware levels 5.30.XX.XX and 5.20.XX.XX; FAStT500 with Firmware levels 5.30.XX.XX, 5.21.XX.XX,
and 5.20.XX.XX; FAStT600 with Firmware level 5.30.XX.XX; FAStT700 with Firmware levels 5.30.XX.XX, 5.21.XX.XX, and 5.20.XX.XX; and FAStT900 with Firmware level
5.30.XX.XX; DS4500, DS4400, DS4300, DS4100; 2105-F20, 2105-E20, 2105-800. HDS storage arrays: 9980, 9970, 9960, 9920, and HP OEM models: XP512, XP1024, XP128.
SUN storage arrays: StorEdge T3 with Firmware level 1.18.02, and StorEdge T3+ with Firmware 2.01.03.

Hewlett Packard HP-UX


Hewlett Packard HP-UX
Information
Management
No. Storage Array Operating System Host Bus Adapter Software
1 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, CX3-80/CX3-40(F)/CX3-20(F); Hewlett Packard HP-UX 11i v1.0 EMC SAN Copy
(HP-UX 11.11) 03.241, 2, 3, 4, 5
EMC Celerra: NS20FC7, NS80FC6
2 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, CX3-80/CX3-40(F)/CX3-20(F); Hewlett Packard HP-UX 11i v1.0 Hewlett Packard EMC SAN Copy
(HP-UX 11.11) A6795A 03.241, 2, 3, 4, 5
EMC Celerra: NS20FC7, NS80FC6
3 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Hewlett Packard HP-UX 11i v1.0 EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; (HP-UX 11.11) 04.28
EMC Celerra: NS-120, NS-480, NS-9608, 9
4 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Hewlett Packard HP-UX 11i v1.0 Hewlett Packard EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; (HP-UX 11.11) A6795A 04.28
EMC Celerra: NS-120, NS-480, NS-9608, 9
1. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
2. Replicas of application data volumes of physical (native) servers created using SnapView, MirrorView and SAN Copy can be presented to a VMware ESX Server. These replicas
configured on the VMware ESX server must be Raw Device Mapping only (VMFS is not supported). Replicas of application data volumes configured as Raw Device Mapping
volumes on a VMware ESX server can also be presented to a physical (native) server.
Replication of Operating System volumes and application volumes from a physical to virtual or virtual to physical environment using CLARiiON replication software is not supported at

03/02/2014 90 Third Party Copy


Third Party Copy
this time. Replication of Operating System volumes, application volumes and application data volumes from a virtual to virtual environment using CLARiiON replication software is
supported.
3. Requires admHost software. See SAN Copy release notice for appropriate revision information.
4. Data movement between CLARiiON and Symmetrix requires Navisphere host agent attached to Symmetrix. Agents supported are Windows, SUN, HP/UX, AIX, and Linux
5. SAN Copy Operational restrictions apply when using SAN Copy with Clusters and AIX Systems. Refer to the SAN Copy release notice for more information.
6. NS80FC has equivalent array attributes to CX3-80
7. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
8. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
9. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.

IBM AIX
IBM AIX
Information Management
No. Storage Array Operating System Host Bus Adapter Software
1 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, CX3-80/CX3-40(F)/CX3-20(F); IBM AIX: 5.210, 11, 5.36, IBM: 5716, 6227, EMC SAN Copy 03.241, 2, 3,
7, 8 6228, 6239 4, 5
EMC Celerra: NS20FC14, NS80FC9
2 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, IBM AIX: 5.210, 11, 5.36, IBM: 5716, 6227, EMC SAN Copy 04.28
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; 7, 8 6228, 6239
EMC Celerra: NS-120, NS-480, NS-96012, 13
1. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
2. Replicas of application data volumes of physical (native) servers created using SnapView, MirrorView and SAN Copy can be presented to a VMware ESX Server. These replicas
configured on the VMware ESX server must be Raw Device Mapping only (VMFS is not supported). Replicas of application data volumes configured as Raw Device Mapping
volumes on a VMware ESX server can also be presented to a physical (native) server.
Replication of Operating System volumes and application volumes from a physical to virtual or virtual to physical environment using CLARiiON replication software is not supported at
this time. Replication of Operating System volumes, application volumes and application data volumes from a virtual to virtual environment using CLARiiON replication software is
supported.
3. Requires admHost software. See SAN Copy release notice for appropriate revision information.
4. Data movement between CLARiiON and Symmetrix requires Navisphere host agent attached to Symmetrix. Agents supported are Windows, SUN, HP/UX, AIX, and Linux
5. SAN Copy Operational restrictions apply when using SAN Copy with Clusters and AIX Systems. Refer to the SAN Copy release notice for more information.
6. Requires EMC ODM 5.2.0.0 or later fileset support for Flare code 2.06 or later (CX-series) and 8.51 or later (FC4700).
7. Requires EMC ODM 5.2.0.0 or later fileset support.
8. Requires EMC ODM 5.2.0.1 or later fileset support.
9. NS80FC has equivalent array attributes to CX3-80
10. Requires EMC ODM 5.1.0.0 or later fileset support.
11. Requires Flare code 2.06 or later (CX-series) and 8.51 or later (FC4700).
12. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
13. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
14. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports

Microsoft Windows 2008 R2 [IA64]


Microsoft Windows 2008 R2 [IA64]
Information
Management
No. Storage Array Operating System Host Bus Adapter Software
1 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c8, Microsoft Windows EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F)8 2008 R2 [IA64] for 03.243, 4, 5, 6, 7
Itanium-Based
Systems
2 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c8, Microsoft Windows EMC Integrated; EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F)8 2008 R2 [IA64] for Emulex: LP10000-E, LP10000DC-E, LP1050-E, 03.243, 4, 5, 6, 7
Itanium-Based LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
Systems
Hewlett Packard: A7298A (LP982), AB232A (LP9802),
Dual-port Fibre Channel Adapter for HP Proliant
BL25p/BL45p 381881-B21, FCA2214/281541-B21
(QLA2340), FCA2214DC/321835-B21 (QLA2342),
FCA2384 (LP9802), FCA2404 (LP9802), FCA2404DC
(LP9802DC), FCA2408 (LP982);
IBM HS20 FC Exp Card (13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)
3 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c8, Microsoft Windows NEC: N8803-031 (QLA2310F), NT2010A-A001 EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F)8, 2008 R2 [IA64] for (QLA2340), NTAB232A (LP9802) 03.243, 4, 5, 6, 7
CX4-120/CX4-240/CX4-480/CX4-960, Itanium-Based
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; Systems
EMC Celerra: NS-120, NS-480, NS-9601, 2
4 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Microsoft Windows EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; 2008 R2 [IA64] for 04.28
Itanium-Based
EMC Celerra: NS-120, NS-480, NS-9601, 2 Systems
5 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Microsoft Windows EMC Integrated; EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; 2008 R2 [IA64] for Emulex: LP10000-E, LP10000DC-E, LP1050-E, 04.28
Itanium-Based LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9601, 2 Systems
Hewlett Packard: A7298A (LP982), AB232A (LP9802),
Dual-port Fibre Channel Adapter for HP Proliant
BL25p/BL45p 381881-B21, FCA2214/281541-B21
(QLA2340), FCA2214DC/321835-B21 (QLA2342),
FCA2384 (LP9802), FCA2404 (LP9802), FCA2404DC
(LP9802DC), FCA2408 (LP982);
IBM HS20 FC Exp Card (13N2203/26R0836);
NEC: N8803-031 (QLA2310F), NT2010A-A001
(QLA2340), NTAB232A (LP9802);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP;

03/02/2014 91 Third Party Copy


Third Party Copy

Unisys FCH742313-P64 (LP9802)


1. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
2. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
3. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
4. Replicas of application data volumes of physical (native) servers created using SnapView, MirrorView and SAN Copy can be presented to a VMware ESX Server. These replicas
configured on the VMware ESX server must be Raw Device Mapping only (VMFS is not supported). Replicas of application data volumes configured as Raw Device Mapping
volumes on a VMware ESX server can also be presented to a physical (native) server.
Replication of Operating System volumes and application volumes from a physical to virtual or virtual to physical environment using CLARiiON replication software is not supported at
this time. Replication of Operating System volumes, application volumes and application data volumes from a virtual to virtual environment using CLARiiON replication software is
supported.
5. Requires admHost software. See SAN Copy release notice for appropriate revision information.
6. Data movement between CLARiiON and Symmetrix requires Navisphere host agent attached to Symmetrix. Agents supported are Windows, SUN, HP/UX, AIX, and Linux
7. SAN Copy Operational restrictions apply when using SAN Copy with Clusters and AIX Systems. Refer to the SAN Copy release notice for more information.
8. CLARiiON CX/CX3 arrays require minimum FLARE revision 02.24, 02.26, 03.24 or 03.26.

Microsoft Windows 2008 R2 [x64]


Microsoft Windows 2008 R2 [x64]
Information
Management
No. Storage Array Operating System Host Bus Adapter Software
1 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c8, Microsoft Windows EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F)8 2008 R2 [x64]: 03.243, 4, 5, 6, 7
DataCenter,
Enterprise Edition,
Standard Edition
2 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c8, Microsoft Windows EMC Integrated; EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F)8 2008 R2 [x64]: Emulex: LP10000-E, LP10000DC-E, LP1050-E, 03.243, 4, 5, 6, 7
DataCenter, LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
Enterprise Edition,
Standard Edition Hewlett Packard: A7298A (LP982), AB232A (LP9802),
Dual-port Fibre Channel Adapter for HP Proliant
BL25p/BL45p 381881-B21, FCA2214/281541-B21
(QLA2340), FCA2214DC/321835-B21 (QLA2342),
FCA2384 (LP9802), FCA2404 (LP9802), FCA2404DC
(LP9802DC), FCA2408 (LP982);
IBM HS20 FC Exp Card (13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)
3 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c8, Microsoft Windows NEC: N8803-031 (QLA2310F), NT2010A-A001 EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F)8, 2008 R2 [x64]: (QLA2340), NTAB232A (LP9802) 03.243, 4, 5, 6, 7
CX4-120/CX4-240/CX4-480/CX4-960, DataCenter,
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; Enterprise Edition,
Standard Edition
EMC Celerra: NS-120, NS-480, NS-9601, 2
4 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Microsoft Windows EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; 2008 R2 [x64]: 04.28
DataCenter,
EMC Celerra: NS-120, NS-480, NS-9601, 2 Enterprise Edition,
Standard Edition
5 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Microsoft Windows EMC Integrated; EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; 2008 R2 [x64]: Emulex: LP10000-E, LP10000DC-E, LP1050-E, 04.28
DataCenter, LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9601, 2 Enterprise Edition,
Standard Edition Hewlett Packard: A7298A (LP982), AB232A (LP9802),
Dual-port Fibre Channel Adapter for HP Proliant
BL25p/BL45p 381881-B21, FCA2214/281541-B21
(QLA2340), FCA2214DC/321835-B21 (QLA2342),
FCA2384 (LP9802), FCA2404 (LP9802), FCA2404DC
(LP9802DC), FCA2408 (LP982);
IBM HS20 FC Exp Card (13N2203/26R0836);
NEC: N8803-031 (QLA2310F), NT2010A-A001
(QLA2340), NTAB232A (LP9802);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)
1. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
2. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
3. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
4. Replicas of application data volumes of physical (native) servers created using SnapView, MirrorView and SAN Copy can be presented to a VMware ESX Server. These replicas
configured on the VMware ESX server must be Raw Device Mapping only (VMFS is not supported). Replicas of application data volumes configured as Raw Device Mapping
volumes on a VMware ESX server can also be presented to a physical (native) server.
Replication of Operating System volumes and application volumes from a physical to virtual or virtual to physical environment using CLARiiON replication software is not supported at
this time. Replication of Operating System volumes, application volumes and application data volumes from a virtual to virtual environment using CLARiiON replication software is
supported.
5. Requires admHost software. See SAN Copy release notice for appropriate revision information.
6. Data movement between CLARiiON and Symmetrix requires Navisphere host agent attached to Symmetrix. Agents supported are Windows, SUN, HP/UX, AIX, and Linux
7. SAN Copy Operational restrictions apply when using SAN Copy with Clusters and AIX Systems. Refer to the SAN Copy release notice for more information.

03/02/2014 92 Third Party Copy


Third Party Copy
8. CLARiiON CX/CX3 arrays require minimum FLARE revision 02.24, 02.26, 03.24 or 03.26.

Microsoft Windows 2008 [IA64]


Microsoft Windows 2008 [IA64]
Information
Management
No. Storage Array Operating System Host Bus Adapter Software
1 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c8, Microsoft Windows EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F)8 2008 [IA64] for 03.243, 4, 5, 6, 7
Itanium-Based
Systems
2 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c8, Microsoft Windows EMC Integrated; EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F)8 2008 [IA64] for Emulex: LP10000-E, LP10000DC-E, LP1050-E, 03.243, 4, 5, 6, 7
Itanium-Based LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
Systems
Hewlett Packard: A7298A (LP982), AB232A (LP9802),
Dual-port Fibre Channel Adapter for HP Proliant
BL25p/BL45p 381881-B21, FCA2214/281541-B21
(QLA2340), FCA2214DC/321835-B21 (QLA2342),
FCA2384 (LP9802), FCA2404 (LP9802), FCA2404DC
(LP9802DC), FCA2408 (LP982);
IBM HS20 FC Exp Card (13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)
3 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c8, Microsoft Windows NEC: N8803-031 (QLA2310F), NT2010A-A001 EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F)8, 2008 [IA64] for (QLA2340), NTAB232A (LP9802) 03.243, 4, 5, 6, 7
CX4-120/CX4-240/CX4-480/CX4-960, Itanium-Based
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; Systems
EMC Celerra: NS-120, NS-480, NS-9601, 2
4 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Microsoft Windows EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; 2008 [IA64] for 04.28
Itanium-Based
EMC Celerra: NS-120, NS-480, NS-9601, 2 Systems
5 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Microsoft Windows EMC Integrated; EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; 2008 [IA64] for Emulex: LP10000-E, LP10000DC-E, LP1050-E, 04.28
Itanium-Based LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9601, 2 Systems
Hewlett Packard: A7298A (LP982), AB232A (LP9802),
Dual-port Fibre Channel Adapter for HP Proliant
BL25p/BL45p 381881-B21, FCA2214/281541-B21
(QLA2340), FCA2214DC/321835-B21 (QLA2342),
FCA2384 (LP9802), FCA2404 (LP9802), FCA2404DC
(LP9802DC), FCA2408 (LP982);
IBM HS20 FC Exp Card (13N2203/26R0836);
NEC: N8803-031 (QLA2310F), NT2010A-A001
(QLA2340), NTAB232A (LP9802);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)
1. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
2. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
3. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
4. Replicas of application data volumes of physical (native) servers created using SnapView, MirrorView and SAN Copy can be presented to a VMware ESX Server. These replicas
configured on the VMware ESX server must be Raw Device Mapping only (VMFS is not supported). Replicas of application data volumes configured as Raw Device Mapping
volumes on a VMware ESX server can also be presented to a physical (native) server.
Replication of Operating System volumes and application volumes from a physical to virtual or virtual to physical environment using CLARiiON replication software is not supported at
this time. Replication of Operating System volumes, application volumes and application data volumes from a virtual to virtual environment using CLARiiON replication software is
supported.
5. Requires admHost software. See SAN Copy release notice for appropriate revision information.
6. Data movement between CLARiiON and Symmetrix requires Navisphere host agent attached to Symmetrix. Agents supported are Windows, SUN, HP/UX, AIX, and Linux
7. SAN Copy Operational restrictions apply when using SAN Copy with Clusters and AIX Systems. Refer to the SAN Copy release notice for more information.
8. CLARiiON CX/CX3 arrays require minimum FLARE revision 02.24, 02.26, 03.24 or 03.26.

Microsoft Windows 2008 [x64]


Microsoft Windows 2008 [x64]
Information
Management
No. Storage Array Operating System Host Bus Adapter Software
1 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c8, Microsoft Windows EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F)8 2008 [x64]: 03.243, 4, 5, 6, 7
DataCenter,
Enterprise Edition,
Standard Edition
2 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c8, Microsoft Windows EMC Integrated; EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F)8 2008 [x64]: Emulex: LP10000-E, LP10000DC-E, LP1050-E, 03.243, 4, 5, 6, 7
DataCenter, LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
Enterprise Edition,
Standard Edition Hewlett Packard: A7298A (LP982), AB232A (LP9802),
Dual-port Fibre Channel Adapter for HP Proliant
BL25p/BL45p 381881-B21, FCA2214/281541-B21
(QLA2340), FCA2214DC/321835-B21 (QLA2342),
FCA2384 (LP9802), FCA2404 (LP9802), FCA2404DC
(LP9802DC), FCA2408 (LP982);
IBM HS20 FC Exp Card (13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,

03/02/2014 93 Third Party Copy


Third Party Copy

QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)
3 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c8, Microsoft Windows NEC: N8803-031 (QLA2310F), NT2010A-A001 EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F)8, 2008 [x64]: (QLA2340), NTAB232A (LP9802) 03.243, 4, 5, 6, 7
CX4-120/CX4-240/CX4-480/CX4-960, DataCenter,
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; Enterprise Edition,
Standard Edition
EMC Celerra: NS-120, NS-480, NS-9601, 2
4 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Microsoft Windows EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; 2008 [x64]: 04.28
DataCenter,
EMC Celerra: NS-120, NS-480, NS-9601, 2 Enterprise Edition,
Standard Edition
5 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Microsoft Windows EMC Integrated; EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; 2008 [x64]: Emulex: LP10000-E, LP10000DC-E, LP1050-E, 04.28
DataCenter, LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9601, 2 Enterprise Edition,
Standard Edition Hewlett Packard: A7298A (LP982), AB232A (LP9802),
Dual-port Fibre Channel Adapter for HP Proliant
BL25p/BL45p 381881-B21, FCA2214/281541-B21
(QLA2340), FCA2214DC/321835-B21 (QLA2342),
FCA2384 (LP9802), FCA2404 (LP9802), FCA2404DC
(LP9802DC), FCA2408 (LP982);
IBM HS20 FC Exp Card (13N2203/26R0836);
NEC: N8803-031 (QLA2310F), NT2010A-A001
(QLA2340), NTAB232A (LP9802);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)
1. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
2. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
3. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
4. Replicas of application data volumes of physical (native) servers created using SnapView, MirrorView and SAN Copy can be presented to a VMware ESX Server. These replicas
configured on the VMware ESX server must be Raw Device Mapping only (VMFS is not supported). Replicas of application data volumes configured as Raw Device Mapping
volumes on a VMware ESX server can also be presented to a physical (native) server.
Replication of Operating System volumes and application volumes from a physical to virtual or virtual to physical environment using CLARiiON replication software is not supported at
this time. Replication of Operating System volumes, application volumes and application data volumes from a virtual to virtual environment using CLARiiON replication software is
supported.
5. Requires admHost software. See SAN Copy release notice for appropriate revision information.
6. Data movement between CLARiiON and Symmetrix requires Navisphere host agent attached to Symmetrix. Agents supported are Windows, SUN, HP/UX, AIX, and Linux
7. SAN Copy Operational restrictions apply when using SAN Copy with Clusters and AIX Systems. Refer to the SAN Copy release notice for more information.
8. CLARiiON CX/CX3 arrays require minimum FLARE revision 02.24, 02.26, 03.24 or 03.26.

Microsoft Windows 2008 [x86]


Microsoft Windows 2008 [x86]
Information
Management
No. Storage Array Operating System Host Bus Adapter Software
1 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c1, Microsoft Windows EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F)1 2008 [x86]: 03.242, 3, 4, 5, 6
DataCenter,
Enterprise Edition,
Standard Edition
2 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c1, Microsoft Windows EMC Integrated; EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F)1 2008 [x86]: Emulex: LP10000-E, LP10000DC-E, LP1050-E, 03.242, 3, 4, 5, 6
DataCenter, LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
Enterprise Edition,
Standard Edition Hewlett Packard: A7298A (LP982), AB232A (LP9802),
Dual-port Fibre Channel Adapter for HP Proliant
BL25p/BL45p 381881-B21, FCA2214/281541-B21
(QLA2340), FCA2214DC/321835-B21 (QLA2342),
FCA2384 (LP9802), FCA2404 (LP9802), FCA2404DC
(LP9802DC), FCA2408 (LP982);
IBM HS20 FC Exp Card (13N2203/26R0836);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)
3 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c1, Microsoft Windows NEC: N8803-031 (QLA2310F), NT2010A-A001 EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F)1, 2008 [x86]: (QLA2340), NTAB232A (LP9802) 03.242, 3, 4, 5, 6
CX4-120/CX4-240/CX4-480/CX4-960, DataCenter,
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; Enterprise Edition,
Standard Edition
EMC Celerra: NS-120, NS-480, NS-9607, 8
4 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Microsoft Windows EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; 2008 [x86]: 04.28
DataCenter,
EMC Celerra: NS-120, NS-480, NS-9607, 8 Enterprise Edition,
Standard Edition
5 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Microsoft Windows EMC Integrated; EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; 2008 [x86]: Emulex: LP10000-E, LP10000DC-E, LP1050-E, 04.28
DataCenter, LP1050DC-E, LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-9607, 8 Enterprise Edition,
Standard Edition Hewlett Packard: A7298A (LP982), AB232A (LP9802),
Dual-port Fibre Channel Adapter for HP Proliant
BL25p/BL45p 381881-B21, FCA2214/281541-B21
(QLA2340), FCA2214DC/321835-B21 (QLA2342),
FCA2384 (LP9802), FCA2404 (LP9802), FCA2404DC
(LP9802DC), FCA2408 (LP982);

03/02/2014 94 Third Party Copy


Third Party Copy

IBM HS20 FC Exp Card (13N2203/26R0836);


NEC: N8803-031 (QLA2310F), NT2010A-A001
(QLA2340), NTAB232A (LP9802);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP;
Unisys FCH742313-P64 (LP9802)
1. CLARiiON CX/CX3 arrays require minimum FLARE revision 02.24, 02.26, 03.24 or 03.26.
2. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
3. Replicas of application data volumes of physical (native) servers created using SnapView, MirrorView and SAN Copy can be presented to a VMware ESX Server. These replicas
configured on the VMware ESX server must be Raw Device Mapping only (VMFS is not supported). Replicas of application data volumes configured as Raw Device Mapping
volumes on a VMware ESX server can also be presented to a physical (native) server.
Replication of Operating System volumes and application volumes from a physical to virtual or virtual to physical environment using CLARiiON replication software is not supported at
this time. Replication of Operating System volumes, application volumes and application data volumes from a virtual to virtual environment using CLARiiON replication software is
supported.
4. Requires admHost software. See SAN Copy release notice for appropriate revision information.
5. Data movement between CLARiiON and Symmetrix requires Navisphere host agent attached to Symmetrix. Agents supported are Windows, SUN, HP/UX, AIX, and Linux
6. SAN Copy Operational restrictions apply when using SAN Copy with Clusters and AIX Systems. Refer to the SAN Copy release notice for more information.
7. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
8. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.

Oracle Solaris
Oracle Solaris
Information
Management
No. Storage Array Operating System Host Bus Adapter Software
1 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Oracle Solaris: 10 Emulex: LP10000-E, LP10000DC-E, LP9002-E EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F); SPARC7, 9 (LP9002L-E), LP9002C-E, LP9002DC-E, 03.241, 2, 3
SPARC4 LP9002S-E, LP9802-E;
EMC Celerra: NS20FC5, NS80FC8
Oracle: SG-XPCI1FC-QL2 (QLA2340)6,
SG-XPCI2FC-QF2-Z (X6768A)6, X6767A
(SG-XPCI1FC-QF2), X6768A (SG-XPCI2FC-QF2);
QLogic: QCP2202F-E, QCP2202F-E-SP,
QLA2340-E-SP, QLA2342-E-SP
2 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Oracle Solaris: 10 Emulex: LP10000-E, LP10000DC-E, LP9002-E EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; SPARC7, 9 (LP9002L-E), LP9002C-E, LP9002DC-E, 04.28
SPARC4 LP9002S-E, LP9802-E;
EMC Celerra: NS-120, NS-480, NS-9609, 10
Oracle: SG-XPCI1FC-QL2 (QLA2340)6,
SG-XPCI2FC-QF2-Z (X6768A)6, X6767A
(SG-XPCI1FC-QF2), X6768A (SG-XPCI2FC-QF2);
QLogic: QCP2202F-E, QCP2202F-E-SP,
QLA2340-E-SP, QLA2342-E-SP
1. Requires admHost software. See SAN Copy release notice for appropriate revision information.
2. Data movement between CLARiiON and Symmetrix requires Navisphere host agent attached to Symmetrix. Agents supported are Windows, SUN, HP/UX, AIX, and Linux
3. SAN Copy Operational restrictions apply when using SAN Copy with Clusters and AIX Systems. Refer to the SAN Copy release notice for more information.
4. EMC recommends as a best practice that customers upgrade to the most recent Solaris 9 SPARC patch bundle released on the Oracle website:http://support.oracle.com
5. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
6. This adapter has another name without the "X" in front of "PCI", such as SG-PCI....
7. EMC recommends as a best practice that customers upgrade to the most recent Solaris 10 SPARC patch bundle released on the Oracle website:http://support.oracle.com
8. NS80FC has equivalent array attributes to CX3-80
9. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
10. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.

Red Hat RHEL [32-Bit]


Red Hat RHEL [32-Bit]
Information Management
No. Storage Array Operating System Software
1 EMC CLARiiON CX300 Red Hat RHEL [32-Bit] 4.0 U2 AS/ES EMC SAN Copy 02.241, 2, 3, 4, 5, 10,
11, 12

2 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, CX3-80/CX3-40(F)/CX3-20(F); Red Hat RHEL [32-Bit] 4.0: AS/ES, U1 EMC SAN Copy 03.241, 2, 3, 4, 5
AS/ES, U2 AS/ES
EMC Celerra: NS20FC6, NS80FC7
3 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL [32-Bit] 4.0: AS/ES, U1 EMC SAN Copy 04.28
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; AS/ES, U2 AS/ES
EMC Celerra: NS-120, NS-480, NS-9608, 9
1. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
2. Replicas of application data volumes of physical (native) servers created using SnapView, MirrorView and SAN Copy can be presented to a VMware ESX Server. These replicas
configured on the VMware ESX server must be Raw Device Mapping only (VMFS is not supported). Replicas of application data volumes configured as Raw Device Mapping
volumes on a VMware ESX server can also be presented to a physical (native) server.
Replication of Operating System volumes and application volumes from a physical to virtual or virtual to physical environment using CLARiiON replication software is not supported at
this time. Replication of Operating System volumes, application volumes and application data volumes from a virtual to virtual environment using CLARiiON replication software is
supported.
3. Requires admHost software. See SAN Copy release notice for appropriate revision information.
4. Data movement between CLARiiON and Symmetrix requires Navisphere host agent attached to Symmetrix. Agents supported are Windows, SUN, HP/UX, AIX, and Linux

03/02/2014 95 Third Party Copy


Third Party Copy
5. SAN Copy Operational restrictions apply when using SAN Copy with Clusters and AIX Systems. Refer to the SAN Copy release notice for more information.
6. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
7. NS80FC has equivalent array attributes to CX3-80
8. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
9. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
10. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) The VMFS replica must be assigned to a different ESX server. The target ESX server must not already have access to the original source VMFS volume.
6) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
7) RDM volumes cannot be created when the ESX server is booting from SAN. VMFS volumes can be created when the ESX server is booting from SAN. If ESX server is not booting
from SAN, Virtual Machines can be configured using either VMFS or RDM volumes.
8) Ensure the snapshot is activated or clone fractured before presenting them to an ESX server.
9) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
10) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
11) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
11. SAN Copy installation is supported on CX700, CX500, CX600, CX400, FC4700, and FC4700-2 storage arrays. Data movement is supported in and between CX series arrays,
FC4500, FC4700, FC4700-2, FC5300, Symmetrix 8000 series, Symmetrix DMX Series, Symmetrix 3832, Symmetrix 3x30, and Symmetrix 3700 arrays. The last version to support
SAN Copy to/from FC4700, FC4700-2, FC4500 and FC5300 arrays is 02.19.xxx.5.030.
12. SAN Copy installation is supported on CX700, CX600, CX500, CX400, FC4700, and FC4700-2 storage arrays. Data movement is supported with the following HP, IBM, HDS, and
SUN storage arrays. HP storage arrays: Storage Works RAID Array products (HSG80 controller): RA8000 with Firmware levels 8.5, 8.6 and 8.7; ESA12000 with Firmware levels 8.5,
8.6 and 8.7; MA8000 with Firmware levels 8.5, 8.6 and 8.7; EMA12000 with Firmware levels 8.5, 8.6 and 8.7; EMA16000 with Firmware levels 8.5, 8.6 and 8.7; EVA4000 (HSV200
controller), EVA6000 (HSV200 Controller), EVA8000 (HSV210 controller), EVA3000 (HSV100 controller) and EVA5000 (HSV110 controller) with Firmware levels 2 and 3; and
MSA-1000 with Firmware version 2.38. IBM storage arrays: FAStT200 with Firmware levels 5.30.XX.XX and 5.20.XX.XX; FAStT500 with Firmware levels 5.30.XX.XX, 5.21.XX.XX,
and 5.20.XX.XX; FAStT600 with Firmware level 5.30.XX.XX; FAStT700 with Firmware levels 5.30.XX.XX, 5.21.XX.XX, and 5.20.XX.XX; and FAStT900 with Firmware level
5.30.XX.XX; DS4500, DS4400, DS4300, DS4100; 2105-F20, 2105-E20, 2105-800. HDS storage arrays: 9980, 9970, 9960, 9920, and HP OEM models: XP512, XP1024, XP128.
SUN storage arrays: StorEdge T3 with Firmware level 1.18.02, and StorEdge T3+ with Firmware 2.01.03.

Red Hat RHEL [IA64]


Red Hat RHEL [IA64]
Information
Management
No. Storage Array Operating System Host Bus Adapter Software
1 EMC CLARiiON CX300 Red Hat RHEL EMC SAN Copy
[IA64] 4.0 U1 02.241, 2, 3, 4, 5, 8, 9, 10
AS/ES
2 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F); [IA64] 4.0 U1 03.241, 2, 3, 4, 5
AS/ES
EMC Celerra: NS20FC6, NS80FC7
3 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F); [IA64] 4.0: AS/ES, LP1050DC-E, LP9002-E (LP9002L-E), 03.241, 2, 3, 4, 5
U1 AS/ES LP9002DC-E, LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS20FC6, NS80FC7
Hewlett Packard: A6826A, A7538A;
IBM 24P0960 (QLA2340);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
4 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL EMC SAN Copy 04.28
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IA64] 4.0 U1
AS/ES
EMC Celerra: NS-120, NS-480, NS-96011, 12
5 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN Copy 04.28
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; [IA64] 4.0: AS/ES, LP1050DC-E, LP9002-E (LP9002L-E),
U1 AS/ES LP9002DC-E, LP9802-E, LP9802DC-E, LP982-E;
EMC Celerra: NS-120, NS-480, NS-96011, 12
Hewlett Packard: A6826A, A7538A;
IBM 24P0960 (QLA2340);
QLogic: QLA2310F-E-SP, QLA2340-E-SP,
QLA2342-E-SP
1. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
2. Replicas of application data volumes of physical (native) servers created using SnapView, MirrorView and SAN Copy can be presented to a VMware ESX Server. These replicas
configured on the VMware ESX server must be Raw Device Mapping only (VMFS is not supported). Replicas of application data volumes configured as Raw Device Mapping
volumes on a VMware ESX server can also be presented to a physical (native) server.
Replication of Operating System volumes and application volumes from a physical to virtual or virtual to physical environment using CLARiiON replication software is not supported at
this time. Replication of Operating System volumes, application volumes and application data volumes from a virtual to virtual environment using CLARiiON replication software is
supported.
3. Requires admHost software. See SAN Copy release notice for appropriate revision information.
4. Data movement between CLARiiON and Symmetrix requires Navisphere host agent attached to Symmetrix. Agents supported are Windows, SUN, HP/UX, AIX, and Linux
5. SAN Copy Operational restrictions apply when using SAN Copy with Clusters and AIX Systems. Refer to the SAN Copy release notice for more information.
6. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
7. NS80FC has equivalent array attributes to CX3-80
8. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) The VMFS replica must be assigned to a different ESX server. The target ESX server must not already have access to the original source VMFS volume.
6) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
7) RDM volumes cannot be created when the ESX server is booting from SAN. VMFS volumes can be created when the ESX server is booting from SAN. If ESX server is not booting
from SAN, Virtual Machines can be configured using either VMFS or RDM volumes.
8) Ensure the snapshot is activated or clone fractured before presenting them to an ESX server.
9) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
10) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
11) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only

03/02/2014 96 Third Party Copy


Third Party Copy
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
9. SAN Copy installation is supported on CX700, CX500, CX600, CX400, FC4700, and FC4700-2 storage arrays. Data movement is supported in and between CX series arrays,
FC4500, FC4700, FC4700-2, FC5300, Symmetrix 8000 series, Symmetrix DMX Series, Symmetrix 3832, Symmetrix 3x30, and Symmetrix 3700 arrays. The last version to support
SAN Copy to/from FC4700, FC4700-2, FC4500 and FC5300 arrays is 02.19.xxx.5.030.
10. SAN Copy installation is supported on CX700, CX600, CX500, CX400, FC4700, and FC4700-2 storage arrays. Data movement is supported with the following HP, IBM, HDS, and
SUN storage arrays. HP storage arrays: Storage Works RAID Array products (HSG80 controller): RA8000 with Firmware levels 8.5, 8.6 and 8.7; ESA12000 with Firmware levels 8.5,
8.6 and 8.7; MA8000 with Firmware levels 8.5, 8.6 and 8.7; EMA12000 with Firmware levels 8.5, 8.6 and 8.7; EMA16000 with Firmware levels 8.5, 8.6 and 8.7; EVA4000 (HSV200
controller), EVA6000 (HSV200 Controller), EVA8000 (HSV210 controller), EVA3000 (HSV100 controller) and EVA5000 (HSV110 controller) with Firmware levels 2 and 3; and
MSA-1000 with Firmware version 2.38. IBM storage arrays: FAStT200 with Firmware levels 5.30.XX.XX and 5.20.XX.XX; FAStT500 with Firmware levels 5.30.XX.XX, 5.21.XX.XX,
and 5.20.XX.XX; FAStT600 with Firmware level 5.30.XX.XX; FAStT700 with Firmware levels 5.30.XX.XX, 5.21.XX.XX, and 5.20.XX.XX; and FAStT900 with Firmware level
5.30.XX.XX; DS4500, DS4400, DS4300, DS4100; 2105-F20, 2105-E20, 2105-800. HDS storage arrays: 9980, 9970, 9960, 9920, and HP OEM models: XP512, XP1024, XP128.
SUN storage arrays: StorEdge T3 with Firmware level 1.18.02, and StorEdge T3+ with Firmware 2.01.03.
11. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
12. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.

Red Hat RHEL [x86_64]


Red Hat RHEL [x86_64]
Information Management
No. Storage Array Operating System Software
1 EMC CLARiiON CX300 Red Hat RHEL [x86_64] 4.0 U2 AS/ES EMC SAN Copy 02.241, 2, 3, 4, 5, 6,
7, 8

2 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, CX3-80/CX3-40(F)/CX3-20(F); Red Hat RHEL [x86_64] 4.0: AS/ES, U1 EMC SAN Copy 03.241, 2, 3, 4, 5
AS/ES, U2 AS/ES
EMC Celerra: NS20FC9, NS80FC10
3 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, Red Hat RHEL [x86_64] 4.0: AS/ES, U1 EMC SAN Copy 04.28
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; AS/ES, U2 AS/ES
EMC Celerra: NS-120, NS-480, NS-96011, 12
1. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
2. Replicas of application data volumes of physical (native) servers created using SnapView, MirrorView and SAN Copy can be presented to a VMware ESX Server. These replicas
configured on the VMware ESX server must be Raw Device Mapping only (VMFS is not supported). Replicas of application data volumes configured as Raw Device Mapping
volumes on a VMware ESX server can also be presented to a physical (native) server.
Replication of Operating System volumes and application volumes from a physical to virtual or virtual to physical environment using CLARiiON replication software is not supported at
this time. Replication of Operating System volumes, application volumes and application data volumes from a virtual to virtual environment using CLARiiON replication software is
supported.
3. Requires admHost software. See SAN Copy release notice for appropriate revision information.
4. Data movement between CLARiiON and Symmetrix requires Navisphere host agent attached to Symmetrix. Agents supported are Windows, SUN, HP/UX, AIX, and Linux
5. SAN Copy Operational restrictions apply when using SAN Copy with Clusters and AIX Systems. Refer to the SAN Copy release notice for more information.
6. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) The VMFS replica must be assigned to a different ESX server. The target ESX server must not already have access to the original source VMFS volume.
6) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
7) RDM volumes cannot be created when the ESX server is booting from SAN. VMFS volumes can be created when the ESX server is booting from SAN. If ESX server is not booting
from SAN, Virtual Machines can be configured using either VMFS or RDM volumes.
8) Ensure the snapshot is activated or clone fractured before presenting them to an ESX server.
9) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
10) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
11) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
7. SAN Copy installation is supported on CX700, CX500, CX600, CX400, FC4700, and FC4700-2 storage arrays. Data movement is supported in and between CX series arrays,
FC4500, FC4700, FC4700-2, FC5300, Symmetrix 8000 series, Symmetrix DMX Series, Symmetrix 3832, Symmetrix 3x30, and Symmetrix 3700 arrays. The last version to support
SAN Copy to/from FC4700, FC4700-2, FC4500 and FC5300 arrays is 02.19.xxx.5.030.
8. SAN Copy installation is supported on CX700, CX600, CX500, CX400, FC4700, and FC4700-2 storage arrays. Data movement is supported with the following HP, IBM, HDS, and
SUN storage arrays. HP storage arrays: Storage Works RAID Array products (HSG80 controller): RA8000 with Firmware levels 8.5, 8.6 and 8.7; ESA12000 with Firmware levels 8.5,
8.6 and 8.7; MA8000 with Firmware levels 8.5, 8.6 and 8.7; EMA12000 with Firmware levels 8.5, 8.6 and 8.7; EMA16000 with Firmware levels 8.5, 8.6 and 8.7; EVA4000 (HSV200
controller), EVA6000 (HSV200 Controller), EVA8000 (HSV210 controller), EVA3000 (HSV100 controller) and EVA5000 (HSV110 controller) with Firmware levels 2 and 3; and
MSA-1000 with Firmware version 2.38. IBM storage arrays: FAStT200 with Firmware levels 5.30.XX.XX and 5.20.XX.XX; FAStT500 with Firmware levels 5.30.XX.XX, 5.21.XX.XX,
and 5.20.XX.XX; FAStT600 with Firmware level 5.30.XX.XX; FAStT700 with Firmware levels 5.30.XX.XX, 5.21.XX.XX, and 5.20.XX.XX; and FAStT900 with Firmware level
5.30.XX.XX; DS4500, DS4400, DS4300, DS4100; 2105-F20, 2105-E20, 2105-800. HDS storage arrays: 9980, 9970, 9960, 9920, and HP OEM models: XP512, XP1024, XP128.
SUN storage arrays: StorEdge T3 with Firmware level 1.18.02, and StorEdge T3+ with Firmware 2.01.03.
9. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
10. NS80FC has equivalent array attributes to CX3-80
11. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
12. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.

SUSE SLES [32-Bit]


SUSE SLES [32-Bit]
Information Management
No. Storage Array Operating System Software
1 EMC CLARiiON CX300 SUSE SLES [32-Bit] 9 SP22, 3 EMC SAN Copy 02.244, 5, 6,
7, 8, 11, 12, 13

2 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, CX3-80/CX3-40(F)/CX3-20(F); SUSE SLES [32-Bit] 9 SP22, 3 EMC SAN Copy 03.244, 5, 6,
7, 8
EMC Celerra: NS20FC1, NS80FC14
3 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES [32-Bit] 9 SP22, 3 EMC SAN Copy 04.28
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8;
EMC Celerra: NS-120, NS-480, NS-9609, 10
1. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
2. Novell OES is only supported with Fibre channel connectivity.
3. In accordance with the SUSE Linux Enterprise Product Support Lifecycle Policy, the regular 7 year life-cycle of SUSE Linux Enterprise Server 9 will end on August 31, 2011. All SLES
9 configurations in the ESM will be frozen as of the publication of the August 2011 ESM. At this time, SLES 9 will no longer be publicly supported and will require an extended support
contract from Novell in order for the SLES 9 configuration in the ESM to be supported by EMC. Extended and Self-Support from Novell is planned to end August 31, 2014.
4. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.

03/02/2014 97 Third Party Copy


Third Party Copy
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
5. Replicas of application data volumes of physical (native) servers created using SnapView, MirrorView and SAN Copy can be presented to a VMware ESX Server. These replicas
configured on the VMware ESX server must be Raw Device Mapping only (VMFS is not supported). Replicas of application data volumes configured as Raw Device Mapping
volumes on a VMware ESX server can also be presented to a physical (native) server.
Replication of Operating System volumes and application volumes from a physical to virtual or virtual to physical environment using CLARiiON replication software is not supported at
this time. Replication of Operating System volumes, application volumes and application data volumes from a virtual to virtual environment using CLARiiON replication software is
supported.
6. Requires admHost software. See SAN Copy release notice for appropriate revision information.
7. Data movement between CLARiiON and Symmetrix requires Navisphere host agent attached to Symmetrix. Agents supported are Windows, SUN, HP/UX, AIX, and Linux
8. SAN Copy Operational restrictions apply when using SAN Copy with Clusters and AIX Systems. Refer to the SAN Copy release notice for more information.
9. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
10. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
11. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) The VMFS replica must be assigned to a different ESX server. The target ESX server must not already have access to the original source VMFS volume.
6) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
7) RDM volumes cannot be created when the ESX server is booting from SAN. VMFS volumes can be created when the ESX server is booting from SAN. If ESX server is not booting
from SAN, Virtual Machines can be configured using either VMFS or RDM volumes.
8) Ensure the snapshot is activated or clone fractured before presenting them to an ESX server.
9) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
10) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
11) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
12. SAN Copy installation is supported on CX700, CX500, CX600, CX400, FC4700, and FC4700-2 storage arrays. Data movement is supported in and between CX series arrays,
FC4500, FC4700, FC4700-2, FC5300, Symmetrix 8000 series, Symmetrix DMX Series, Symmetrix 3832, Symmetrix 3x30, and Symmetrix 3700 arrays. The last version to support
SAN Copy to/from FC4700, FC4700-2, FC4500 and FC5300 arrays is 02.19.xxx.5.030.
13. SAN Copy installation is supported on CX700, CX600, CX500, CX400, FC4700, and FC4700-2 storage arrays. Data movement is supported with the following HP, IBM, HDS, and
SUN storage arrays. HP storage arrays: Storage Works RAID Array products (HSG80 controller): RA8000 with Firmware levels 8.5, 8.6 and 8.7; ESA12000 with Firmware levels 8.5,
8.6 and 8.7; MA8000 with Firmware levels 8.5, 8.6 and 8.7; EMA12000 with Firmware levels 8.5, 8.6 and 8.7; EMA16000 with Firmware levels 8.5, 8.6 and 8.7; EVA4000 (HSV200
controller), EVA6000 (HSV200 Controller), EVA8000 (HSV210 controller), EVA3000 (HSV100 controller) and EVA5000 (HSV110 controller) with Firmware levels 2 and 3; and
MSA-1000 with Firmware version 2.38. IBM storage arrays: FAStT200 with Firmware levels 5.30.XX.XX and 5.20.XX.XX; FAStT500 with Firmware levels 5.30.XX.XX, 5.21.XX.XX,
and 5.20.XX.XX; FAStT600 with Firmware level 5.30.XX.XX; FAStT700 with Firmware levels 5.30.XX.XX, 5.21.XX.XX, and 5.20.XX.XX; and FAStT900 with Firmware level
5.30.XX.XX; DS4500, DS4400, DS4300, DS4100; 2105-F20, 2105-E20, 2105-800. HDS storage arrays: 9980, 9970, 9960, 9920, and HP OEM models: XP512, XP1024, XP128.
SUN storage arrays: StorEdge T3 with Firmware level 1.18.02, and StorEdge T3+ with Firmware 2.01.03.
14. NS80FC has equivalent array attributes to CX3-80

SUSE SLES [IA64]


SUSE SLES [IA64]
No. Storage Array Operating System Information Management Software
1 EMC CLARiiON CX300 SUSE SLES [IA64] 9 EMC SAN Copy 02.244, 5, 6, 7, 8, 10, 11, 12
SP21
2 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, CX3-80/CX3-40(F)/CX3-20(F); SUSE SLES [IA64] 9 EMC SAN Copy 03.244, 5, 6, 7, 8
SP21
EMC Celerra: NS20FC9, NS80FC13
3 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES [IA64] 9 EMC SAN Copy 04.28
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; SP21
EMC Celerra: NS-120, NS-480, NS-9602, 3
1. In accordance with the SUSE Linux Enterprise Product Support Lifecycle Policy, the regular 7 year life-cycle of SUSE Linux Enterprise Server 9 will end on August 31, 2011. All SLES
9 configurations in the ESM will be frozen as of the publication of the August 2011 ESM. At this time, SLES 9 will no longer be publicly supported and will require an extended support
contract from Novell in order for the SLES 9 configuration in the ESM to be supported by EMC. Extended and Self-Support from Novell is planned to end August 31, 2014.
2. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
3. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
4. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
5. Replicas of application data volumes of physical (native) servers created using SnapView, MirrorView and SAN Copy can be presented to a VMware ESX Server. These replicas
configured on the VMware ESX server must be Raw Device Mapping only (VMFS is not supported). Replicas of application data volumes configured as Raw Device Mapping
volumes on a VMware ESX server can also be presented to a physical (native) server.
Replication of Operating System volumes and application volumes from a physical to virtual or virtual to physical environment using CLARiiON replication software is not supported at
this time. Replication of Operating System volumes, application volumes and application data volumes from a virtual to virtual environment using CLARiiON replication software is
supported.
6. Requires admHost software. See SAN Copy release notice for appropriate revision information.
7. Data movement between CLARiiON and Symmetrix requires Navisphere host agent attached to Symmetrix. Agents supported are Windows, SUN, HP/UX, AIX, and Linux
8. SAN Copy Operational restrictions apply when using SAN Copy with Clusters and AIX Systems. Refer to the SAN Copy release notice for more information.
9. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
10. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) The VMFS replica must be assigned to a different ESX server. The target ESX server must not already have access to the original source VMFS volume.
6) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
7) RDM volumes cannot be created when the ESX server is booting from SAN. VMFS volumes can be created when the ESX server is booting from SAN. If ESX server is not booting
from SAN, Virtual Machines can be configured using either VMFS or RDM volumes.
8) Ensure the snapshot is activated or clone fractured before presenting them to an ESX server.
9) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
10) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
11) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
11.

03/02/2014 98 Third Party Copy


Third Party Copy
SAN Copy installation is supported on CX700, CX500, CX600, CX400, FC4700, and FC4700-2 storage arrays. Data movement is supported in and between CX series arrays,
FC4500, FC4700, FC4700-2, FC5300, Symmetrix 8000 series, Symmetrix DMX Series, Symmetrix 3832, Symmetrix 3x30, and Symmetrix 3700 arrays. The last version to support
SAN Copy to/from FC4700, FC4700-2, FC4500 and FC5300 arrays is 02.19.xxx.5.030.
12. SAN Copy installation is supported on CX700, CX600, CX500, CX400, FC4700, and FC4700-2 storage arrays. Data movement is supported with the following HP, IBM, HDS, and
SUN storage arrays. HP storage arrays: Storage Works RAID Array products (HSG80 controller): RA8000 with Firmware levels 8.5, 8.6 and 8.7; ESA12000 with Firmware levels 8.5,
8.6 and 8.7; MA8000 with Firmware levels 8.5, 8.6 and 8.7; EMA12000 with Firmware levels 8.5, 8.6 and 8.7; EMA16000 with Firmware levels 8.5, 8.6 and 8.7; EVA4000 (HSV200
controller), EVA6000 (HSV200 Controller), EVA8000 (HSV210 controller), EVA3000 (HSV100 controller) and EVA5000 (HSV110 controller) with Firmware levels 2 and 3; and
MSA-1000 with Firmware version 2.38. IBM storage arrays: FAStT200 with Firmware levels 5.30.XX.XX and 5.20.XX.XX; FAStT500 with Firmware levels 5.30.XX.XX, 5.21.XX.XX,
and 5.20.XX.XX; FAStT600 with Firmware level 5.30.XX.XX; FAStT700 with Firmware levels 5.30.XX.XX, 5.21.XX.XX, and 5.20.XX.XX; and FAStT900 with Firmware level
5.30.XX.XX; DS4500, DS4400, DS4300, DS4100; 2105-F20, 2105-E20, 2105-800. HDS storage arrays: 9980, 9970, 9960, 9920, and HP OEM models: XP512, XP1024, XP128.
SUN storage arrays: StorEdge T3 with Firmware level 1.18.02, and StorEdge T3+ with Firmware 2.01.03.
13. NS80FC has equivalent array attributes to CX3-80

SUSE SLES [x86_64]


SUSE SLES [x86_64]
No. Storage Array Operating System Information Management Software
1 EMC CLARiiON CX300 SUSE SLES [x86_64] 9 EMC SAN Copy 02.242, 3, 4, 5, 6, 7, 8, 9
SP21
2 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, CX3-80/CX3-40(F)/CX3-20(F); SUSE SLES [x86_64] 9 EMC SAN Copy 03.242, 3, 4, 5, 6
SP21
EMC Celerra: NS20FC12, NS80FC13
3 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, SUSE SLES [x86_64] 9 EMC SAN Copy 04.28
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; SP21
EMC Celerra: NS-120, NS-480, NS-96010, 11
1. In accordance with the SUSE Linux Enterprise Product Support Lifecycle Policy, the regular 7 year life-cycle of SUSE Linux Enterprise Server 9 will end on August 31, 2011. All SLES
9 configurations in the ESM will be frozen as of the publication of the August 2011 ESM. At this time, SLES 9 will no longer be publicly supported and will require an extended support
contract from Novell in order for the SLES 9 configuration in the ESM to be supported by EMC. Extended and Self-Support from Novell is planned to end August 31, 2014.
2. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
3. Replicas of application data volumes of physical (native) servers created using SnapView, MirrorView and SAN Copy can be presented to a VMware ESX Server. These replicas
configured on the VMware ESX server must be Raw Device Mapping only (VMFS is not supported). Replicas of application data volumes configured as Raw Device Mapping
volumes on a VMware ESX server can also be presented to a physical (native) server.
Replication of Operating System volumes and application volumes from a physical to virtual or virtual to physical environment using CLARiiON replication software is not supported at
this time. Replication of Operating System volumes, application volumes and application data volumes from a virtual to virtual environment using CLARiiON replication software is
supported.
4. Requires admHost software. See SAN Copy release notice for appropriate revision information.
5. Data movement between CLARiiON and Symmetrix requires Navisphere host agent attached to Symmetrix. Agents supported are Windows, SUN, HP/UX, AIX, and Linux
6. SAN Copy Operational restrictions apply when using SAN Copy with Clusters and AIX Systems. Refer to the SAN Copy release notice for more information.
7. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) The VMFS replica must be assigned to a different ESX server. The target ESX server must not already have access to the original source VMFS volume.
6) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
7) RDM volumes cannot be created when the ESX server is booting from SAN. VMFS volumes can be created when the ESX server is booting from SAN. If ESX server is not booting
from SAN, Virtual Machines can be configured using either VMFS or RDM volumes.
8) Ensure the snapshot is activated or clone fractured before presenting them to an ESX server.
9) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
10) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
11) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
8. SAN Copy installation is supported on CX700, CX500, CX600, CX400, FC4700, and FC4700-2 storage arrays. Data movement is supported in and between CX series arrays,
FC4500, FC4700, FC4700-2, FC5300, Symmetrix 8000 series, Symmetrix DMX Series, Symmetrix 3832, Symmetrix 3x30, and Symmetrix 3700 arrays. The last version to support
SAN Copy to/from FC4700, FC4700-2, FC4500 and FC5300 arrays is 02.19.xxx.5.030.
9. SAN Copy installation is supported on CX700, CX600, CX500, CX400, FC4700, and FC4700-2 storage arrays. Data movement is supported with the following HP, IBM, HDS, and
SUN storage arrays. HP storage arrays: Storage Works RAID Array products (HSG80 controller): RA8000 with Firmware levels 8.5, 8.6 and 8.7; ESA12000 with Firmware levels 8.5,
8.6 and 8.7; MA8000 with Firmware levels 8.5, 8.6 and 8.7; EMA12000 with Firmware levels 8.5, 8.6 and 8.7; EMA16000 with Firmware levels 8.5, 8.6 and 8.7; EVA4000 (HSV200
controller), EVA6000 (HSV200 Controller), EVA8000 (HSV210 controller), EVA3000 (HSV100 controller) and EVA5000 (HSV110 controller) with Firmware levels 2 and 3; and
MSA-1000 with Firmware version 2.38. IBM storage arrays: FAStT200 with Firmware levels 5.30.XX.XX and 5.20.XX.XX; FAStT500 with Firmware levels 5.30.XX.XX, 5.21.XX.XX,
and 5.20.XX.XX; FAStT600 with Firmware level 5.30.XX.XX; FAStT700 with Firmware levels 5.30.XX.XX, 5.21.XX.XX, and 5.20.XX.XX; and FAStT900 with Firmware level
5.30.XX.XX; DS4500, DS4400, DS4300, DS4100; 2105-F20, 2105-E20, 2105-800. HDS storage arrays: 9980, 9970, 9960, 9920, and HP OEM models: XP512, XP1024, XP128.
SUN storage arrays: StorEdge T3 with Firmware level 1.18.02, and StorEdge T3+ with Firmware 2.01.03.
10. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
11. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
12. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
13. NS80FC has equivalent array attributes to CX3-80

VMware ESX
VMware ESX
Information
Management
No. Storage Array Operating System Host Bus Adapter Software
1 EMC CLARiiON CX300 VMware ESX 3.55 Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN Copy:
LP1050DC-E, LP11000-E, LP11002-E, LP1150-E, 02.241, 2, 3, 4, 8, 9, 10,
LP8000-EMC, LP9002-E (LP9002L-E), LP9802-E, 02.261, 2, 3, 4, 8, 9, 10
LP9802DC-E, LP982-E, LPe11000-E,
LPe11000-E-G, LPe11002-E, LPe11002-E-G,
LPe1150-E, LPe1150-E-G;
QLogic: QLA2200F-EMC, QLA2310F-E-SP,
QLA2340-E-SP, QLA2342-E-SP, QLA2460-E-SP,
QLA2462-E-SP, QLE2360-E-SP, QLE2362-E-SP,
QLE2460-E-SP, QLE2462-E-SP

03/02/2014 99 Third Party Copy


Third Party Copy
2 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, VMware ESX: 3.55, QLogic: QLA4050C-E-SP, QLA4052C-E-SP, EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F) 4.0 (vSphere 4)5, 11, QLE4060C-E-SP, QLE4062C-E-SP 03.261, 2, 3, 4
12, 4.1 (vSphere 4)5,
11, 12, 13, 14, 15, 16, 17

3 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, VMware ESX: 4.0 Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F) (vSphere 4)5, 11, 12, LP8000-EMC, LP9002-E (LP9002L-E), LP9802-E, 03.261, 2, 3, 4
4.1 (vSphere 4)5, 11, LP9802DC-E, LP982-E, LPe11000-E,
12, 13, 14, 15, 16, 17 LPe11000-E-G, LPe11002-E, LPe11002-E-G,
LPe1150-E, LPe1150-E-G;
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLE2360-E-SP, QLE2362-E-SP, QLE2460-E-SP,
QLE2462-E-SP
4 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, VMware ESX 3.55 Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN Copy:
CX3-80/CX3-40(F)/CX3-20(F); LP1050DC-E, LP11000-E, LP11002-E, LP1150-E, 03.241, 2, 3, 4, 03.261,
LP8000-EMC, LP9002-E (LP9002L-E), LP9802-E, 2, 3, 4
EMC Celerra: NS20FC6, NS80FC7 LP9802DC-E, LP982-E, LPe11000-E,
LPe11000-E-G, LPe11002-E, LPe11002-E-G,
LPe1150-E, LPe1150-E-G;
QLogic: QLA2200F-EMC, QLA2310F-E-SP,
QLA2340-E-SP, QLA2342-E-SP, QLA2460-E-SP,
QLA2462-E-SP, QLE2360-E-SP, QLE2362-E-SP,
QLE2460-E-SP, QLE2462-E-SP
5 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, VMware ESX 3.55 Emulex: LP10000-E, LP10000DC-E, LP1050-E, EMC SAN Copy 04.28
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; LP1050DC-E;
EMC Celerra: NS-120, NS-480, NS-96018, 19 QLogic: QLA2200F-EMC, QLA2310F-E-SP,
QLA2340-E-SP, QLA2342-E-SP
6 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, VMware ESX: 3.55, Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN Copy 04.28
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; 4.0 (vSphere 4)5, 11, LP8000-EMC, LP9002-E (LP9002L-E), LP9802-E,
12, 4.1 (vSphere 4)5, LP9802DC-E, LP982-E, LPe11000-E,
EMC Celerra: NS-120, NS-480, NS-96018, 19 11, 12, 13, 14, 15, 16, 17 LPe11000-E-G, LPe11002-E, LPe11002-E-G,
LPe1150-E, LPe1150-E-G;
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP, QLE2360-E-SP,
QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
QLE4060C-E-SP, QLE4062C-E-SP
1. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
2. Replicas of application data volumes of physical (native) servers created using SnapView, MirrorView and SAN Copy can be presented to a VMware ESX Server. These replicas
configured on the VMware ESX server must be Raw Device Mapping only (VMFS is not supported). Replicas of application data volumes configured as Raw Device Mapping
volumes on a VMware ESX server can also be presented to a physical (native) server.
Replication of Operating System volumes and application volumes from a physical to virtual or virtual to physical environment using CLARiiON replication software is not supported at
this time. Replication of Operating System volumes, application volumes and application data volumes from a virtual to virtual environment using CLARiiON replication software is
supported.
3. Requires admHost software. See SAN Copy release notice for appropriate revision information.
4. Data movement between CLARiiON and Symmetrix requires Navisphere host agent attached to Symmetrix. Agents supported are Windows, SUN, HP/UX, AIX, and Linux
5. For a list of supported guest operating systems, refer to http://www.vmware.com/resources/compatibility/search.php?deviceCategory=software. For additional information refer to the
Guest Operating System Installation Guide at http://www.vmware.com/pdf/GuestOS_guide.pdf
6. NS20FC has equivalent array attributes to CX3-10C except NS20FC array has no iSCSI ports
7. NS80FC has equivalent array attributes to CX3-80
8. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) The VMFS replica must be assigned to a different ESX server. The target ESX server must not already have access to the original source VMFS volume.
6) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
7) RDM volumes cannot be created when the ESX server is booting from SAN. VMFS volumes can be created when the ESX server is booting from SAN. If ESX server is not booting
from SAN, Virtual Machines can be configured using either VMFS or RDM volumes.
8) Ensure the snapshot is activated or clone fractured before presenting them to an ESX server.
9) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
10) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
11) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
9. SAN Copy installation is supported on CX700, CX500, CX600, CX400, FC4700, and FC4700-2 storage arrays. Data movement is supported in and between CX series arrays,
FC4500, FC4700, FC4700-2, FC5300, Symmetrix 8000 series, Symmetrix DMX Series, Symmetrix 3832, Symmetrix 3x30, and Symmetrix 3700 arrays. The last version to support
SAN Copy to/from FC4700, FC4700-2, FC4500 and FC5300 arrays is 02.19.xxx.5.030.
10. SAN Copy installation is supported on CX700, CX600, CX500, CX400, FC4700, and FC4700-2 storage arrays. Data movement is supported with the following HP, IBM, HDS, and
SUN storage arrays. HP storage arrays: Storage Works RAID Array products (HSG80 controller): RA8000 with Firmware levels 8.5, 8.6 and 8.7; ESA12000 with Firmware levels 8.5,
8.6 and 8.7; MA8000 with Firmware levels 8.5, 8.6 and 8.7; EMA12000 with Firmware levels 8.5, 8.6 and 8.7; EMA16000 with Firmware levels 8.5, 8.6 and 8.7; EVA4000 (HSV200
controller), EVA6000 (HSV200 Controller), EVA8000 (HSV210 controller), EVA3000 (HSV100 controller) and EVA5000 (HSV110 controller) with Firmware levels 2 and 3; and
MSA-1000 with Firmware version 2.38. IBM storage arrays: FAStT200 with Firmware levels 5.30.XX.XX and 5.20.XX.XX; FAStT500 with Firmware levels 5.30.XX.XX, 5.21.XX.XX,
and 5.20.XX.XX; FAStT600 with Firmware level 5.30.XX.XX; FAStT700 with Firmware levels 5.30.XX.XX, 5.21.XX.XX, and 5.20.XX.XX; and FAStT900 with Firmware level
5.30.XX.XX; DS4500, DS4400, DS4300, DS4100; 2105-F20, 2105-E20, 2105-800. HDS storage arrays: 9980, 9970, 9960, 9920, and HP OEM models: XP512, XP1024, XP128.
SUN storage arrays: StorEdge T3 with Firmware level 1.18.02, and StorEdge T3+ with Firmware 2.01.03.
11. For information on VMware VAAI (VMware vStorage APIs for Array Integration) support with EMC storage, and details on array firmware versions that support VAAI please refer to
the Storage/SAN section of the VMware Hardware Compatibility Guide at http://www.vmware.com/resources/compatibility/search.php.
12. EMC supports VMware's recommendations for number of nodes in native ESX cluster configurations.
13. Oracle RAC 11g R2 is supported on Red Hat RHEL 5 and Microsoft Windows Virtual Machines running on VMware vSphere 4.1 with EMC storage platforms. For details, refer to
http://vmware.com/support/policies/oracle-support.html
14. Supported with vMotion.
15. Oracle Database 11g R1 is supported on VMware vSphere 4.0 Virtual Machines with Symmetrix, CLARiiON, and Celerra storage platforms. For details, refer to
http://www.vmware.com/solutions/partners/alliances/oracle.html.
16. Supports 2-node Microsoft Cluster Services (MSCS) with Windows 2003 and Windows 2008 virtual machines in CIB (Cluster in Box) and CAB (Cluster across Boxes) configurations.
VMware NMP (Native Multipathing) and PowerPath/VE are supported with MSCS.
The following SCSI Controllers are supported with VMWare and MSCS:
Windows 2000 Server LSI Logic Parallel, Windows Server 2003 LSI Logic Parallel, Windows Server 2008 LSI Logic Parallel.
You must download the LSI Logic Parallel driver for Windows 2000 Server on the LSI Web site.
17. All released updates to ESX version are supported unless otherwise specified by a footnote. Please contact server vendor for the update level required for a specific server.
18. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
19. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.

03/02/2014 100 Third Party Copy


Third Party Copy

VMware ESXi
VMware ESXi
Information
Management
No. Storage Array Operating System Host Bus Adapter Software
1 EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c, VMware ESXi: 4.0 Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN Copy
CX3-80/CX3-40(F)/CX3-20(F) (vSphere 4)3, 6, 8, 4.1 LP8000-EMC, LP9002-E (LP9002L-E), LP9802-E, 03.269, 10, 11, 12
(vSphere 4)1, 2, 3, 4, 5, 6, LP9802DC-E, LP982-E, LPe11000-E, LPe11000-E-G,
7, 8 LPe11002-E, LPe11002-E-G, LPe1150-E,
LPe1150-E-G;
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP, QLE2360-E-SP,
QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
QLE4060C-E-SP, QLE4062C-E-SP
2 EMC CLARiiON: CX4-120/CX4-240/CX4-480/CX4-960, VMware ESXi: 4.0 Emulex: LP11000-E, LP11002-E, LP1150-E, EMC SAN Copy
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8; (vSphere 4)3, 6, 8, 4.1 LP8000-EMC, LP9002-E (LP9002L-E), LP9802-E, 04.28
(vSphere 4)1, 2, 3, 4, 5, 6, LP9802DC-E, LP982-E, LPe11000-E, LPe11000-E-G,
EMC Celerra: NS-120, NS-480, NS-96013, 14 7, 8 LPe11002-E, LPe11002-E-G, LPe1150-E,
LPe1150-E-G;
QLogic: QLA2460-E-SP, QLA2462-E-SP,
QLA4050C-E-SP, QLA4052C-E-SP, QLE2360-E-SP,
QLE2362-E-SP, QLE2460-E-SP, QLE2462-E-SP,
QLE4060C-E-SP, QLE4062C-E-SP
1. Oracle RAC 11g R2 is supported on Red Hat RHEL 5 and Microsoft Windows Virtual Machines running on VMware vSphere 4.1 with EMC storage platforms. For details, refer to
http://vmware.com/support/policies/oracle-support.html
2. Supported with vMotion.
3. For information on VMware VAAI (VMware vStorage APIs for Array Integration) support with EMC storage, and details on array firmware versions that support VAAI please refer to
the Storage/SAN section of the VMware Hardware Compatibility Guide at http://www.vmware.com/resources/compatibility/search.php.
4. Oracle Database 11g R1 is supported on VMware vSphere 4.0 Virtual Machines with Symmetrix, CLARiiON, and Celerra storage platforms. For details, refer to
http://www.vmware.com/solutions/partners/alliances/oracle.html.
5. Supports 2-node Microsoft Cluster Services (MSCS) with Windows 2003 and Windows 2008 virtual machines in CIB (Cluster in Box) and CAB (Cluster across Boxes) configurations.
VMware NMP (Native Multipathing) and PowerPath/VE are supported with MSCS.
The following SCSI Controllers are supported with VMWare and MSCS:
Windows 2000 Server LSI Logic Parallel, Windows Server 2003 LSI Logic Parallel, Windows Server 2008 LSI Logic Parallel.
You must download the LSI Logic Parallel driver for Windows 2000 Server on the LSI Web site.
6. EMC supports VMware's recommendations for number of nodes in native ESX cluster configurations.
7. All released updates to ESX version are supported unless otherwise specified by a footnote. Please contact server vendor for the update level required for a specific server.
8. For a list of supported guest operating systems, refer to http://www.vmware.com/resources/compatibility/search.php?deviceCategory=software. For additional information refer to the
Guest Operating System Installation Guide at http://www.vmware.com/pdf/GuestOS_guide.pdf
9. Replication of both VMFS and Raw Device Mapping (RDM) volumes is supported using CLARiiON replication software (SnapView, MirrorView and SAN Copy) starting with Release
19. The OS/application as well as application data can be replicated using CLARiiON replication software.
Note:
1) The virtual disks in a VMFS volume must be in persistent-mode during the replication process.
2) CLARiiON VSS provider is not supported on VMFS volumes.
3) If replicating an entire VMFS volume that contains a number of virtual disks on a single CLARiiON LUN, the granularity of replication is the entire LUN with all its virtual disks.
4) Use the consistency technology available on SnapView/MirrorView, when making copies of VMFS volumes that span multiple CLARiiON LUNs.
5) For source LUNs configured as RDM volumes, the replica can be presented to the same ESX server but to a different Virtual Machine unless the guest OS is qualified to allow
same host access.
6) When replicating OS images, you will only have a crash consistent copy if the Virtual Machines are not shutdown during the replication process.
7) Please note that replicating a suspended Virtual Machine will result in a crash consistent copy.
8) Admsnap, Admhost utilities must be installed only on Virtual Machines. With admsnap or admhost installed on the Virtual Machine, most of the commands issued on VMFS
volumes will fail, since VMFS volumes do not support scsi pass-through commands to talk to the CLARiiON. Use Navisphere Manager or Navisphere CLI instead. The only
commands that will work with VMFS volumes are admsnap flush and admhost flush. Admsnap is not supported under Netware Virtual Machines with either RDM or VMFS volumes.
10. Replicas of application data volumes of physical (native) servers created using SnapView, MirrorView and SAN Copy can be presented to a VMware ESX Server. These replicas
configured on the VMware ESX server must be Raw Device Mapping only (VMFS is not supported). Replicas of application data volumes configured as Raw Device Mapping
volumes on a VMware ESX server can also be presented to a physical (native) server.
Replication of Operating System volumes and application volumes from a physical to virtual or virtual to physical environment using CLARiiON replication software is not supported at
this time. Replication of Operating System volumes, application volumes and application data volumes from a virtual to virtual environment using CLARiiON replication software is
supported.
11. Requires admHost software. See SAN Copy release notice for appropriate revision information.
12. Data movement between CLARiiON and Symmetrix requires Navisphere host agent attached to Symmetrix. Agents supported are Windows, SUN, HP/UX, AIX, and Linux
13. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
14. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.

03/02/2014 101 Third Party Copy

Potrebbero piacerti anche