Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
,LTD
Address:NO.1,Bldg.1,5009,South of West Chongde St.,Yanzi Rd.,Gaomi,Weifang City,China
Tel: +86 15753619233 Email: manager@oilwellmachinery.com manager@eastlandpetroleum.com
Web: www.oilwellmachinery.com
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Address:NO.1,Bldg.1,5009,South of West Chongde St.,Yanzi Rd.,Gaomi,Weifang City,China
Tel: +86 15753619233 Email: manager@oilwellmachinery.com
GAOMI EASTLAND OILWELL MACHINERY CO.,LTD
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Address:NO.1,Bldg.1,5009,South of West Chongde St.,Yanzi Rd.,Gaomi,Weifang City,China
Tel: +86 15753619233 Email: manager@oilwellmachinery.com
GAOMI EASTLAND OILWELL MACHINERY CO.,LTD
B. ELW446 PERFORMANCE CHART
70 200 110 93 76 87 69 52
Note: Rateings are based on 90% mechanical efficiency and 100% volumetric efficency. Mechanical Efficiency =90%
Fill factor =100% Volumetric Efficiency:100%
C. STRUCTURE CHARACTER
ELW-440/446 Pump can be widely used in all kinds of works in oil field. When the cylinder liner
specification is 6"-3 1/2", piston structure is recommended and it is suitable for Oil-Well Repair
and shallow-well drilling, etc. When the cylinder liner specification is 3 1/4"-2", axial piston
structure is recommended and it is suitable for high-pressure work.
a.The Pump stand is constructed of steel plates by welding. Furthermore, because the post
weld annealing treatment is applied to eliminate the internal stress, its strength is high and its
steel is good. Moreover, the strengthening plate structure is adopted in the crank shaft bearing
house and the main bearing house, therefore its strength is high and its steel is good.
b.The crank shaft is constructed of forgings in balance, and thus it is light in weight and it runs
smoothly without any vibration.
c.The gear shaft is made of forgings of alloy steel and the herringbone gear as a whole is
installed with medium hardness tooth surface gear on the shaft.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Address:NO.1,Bldg.1,5009,South of West Chongde St.,Yanzi Rd.,Gaomi,Weifang City,China
Tel: +86 15753619233 Email: manager@oilwellmachinery.com
GAOMI EASTLAND OILWELL MACHINERY CO.,LTD
d.The cross head is made of ductile cast iron by entire cast which thus makes the
wear-resistant good. The guide plate is formed in up- and - down structure which thus can
adjust the concentricity by the gasket in the up or the down gasket.
e.The hydraulic cylinder is made of alloy steel cast in straight-through type and its volume
small and volumetric efficiency high. Furthermore, the surface of the cylinder has been treated
with chemical nickel-plating to enhance its wear-resistant.
f.The cylinder liners of the W440/446 pump have a same sized external diameter. The fasten
effect is achieved by the squared cylinder liner pressing cover and the bolt pressing the
hydraulic cylinder. The seal between the cylinder liner and the hydraulic cylinder is achieved by
the rubber mat in rectangle.
g.In the lubrication system, the forced lubricating is adopted. The gear oil pump, which is
installed in the oil rank, transmits the pressured oil, through lubrication lines, into the cross head
guide plate and all the shafts to achieve the forced lubrication and cooling purpose.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Address:NO.1,Bldg.1,5009,South of West Chongde St.,Yanzi Rd.,Gaomi,Weifang City,China
Tel: +86 15753619233 Email: manager@oilwellmachinery.com