Pipeline Inspection Plant Integrity Limited inspected and assessed the integrity of the aerial river crossings for the 8 condensate line a client in New Zealand.
These regions were ideal for Guided Wave Inspection
due to the areas having limited access for conventional non-destructive localized inspection. In addition, the pipe was a long straight length and Guided Waves provides 100% volumetric coverage of the pipe wall.
The Teletest Focus guided wave system was used to
inspect the aerial river crossings. Teletest Focus is an externally applied inspection tool which can screen pipelines (and process piping) for internal and Location photo of a typical aerial river crossing inspected with external corrosion. Pipelines can be tested in service, Teletest avoiding the need to shut down and stop production Aerial Section for inspection. A wide range of pipe sizes can be Buried Section inspected, from 2 to 48 nominal diameter.
A typical A-scan image collected during the inspection
The aerial river crossings inspected during this scope
were found to be in good condition and no areas required further investigation. Regular inspections of Teletest Focus guided wave ultrasonic test equipment used to inspect an 8 condensate line in New Plymouth, New Zealand. this area are planned to ensure that thThis is the second inspection of this type that Plant Integrity has conducted for its client in New Zealand. The data The widest of the aerial river crossings inspected was collected shows that this type of application is well 65m in length after which the line entered a buried suited for inspection with LRUT (guided wave section. The Teletest Focus system utilizing the 5 ring ultrasonic inspection) torsional tool was used in this particular case and the For information on how we can support your pipeline results show that whole crossing was inspected from integrity management programme, please contact us one side of the crossing plus 20m -25m inspection of by email at info@plantintegrity.com or by telephone at the buried and wrapped section was also covered. our Cambridge, UK headquarters on 0044 1223 893994.
Plant Integrity Ltd
Granta Park, Gt Abington, Cambridge CB21 6AL T: +44 (0) 1223 893994 F: +44 (0) 1223 893944 info@plantintegrity.com www.plantintegrity.com A TWI Group Company