Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Tellabs 8606
Ethernet Aggregator
Overview
The Tellabs 8606 aggregator is a managed, standalone Layer 2 The Tellabs 8606 aggregator provides cost-efficient traffic
Ethernet switch with 24 10/100 Mbps ports, two Gigabit combo aggregation for the service provider within the building.
ports, two RJ-45 Gigabit ports, one console port and one 10/100 IP/MPLS-level service mapping is extended to the first telecoms
Ethernet RJ-45 port for local management. A combo port contains facility, where the Tellabs 8620 switch, Tellabs 8630 switch or
one Gigabit port and one slot for Small Form-Factor Pluggable (SFP) the Tellabs 8660 switch is typically located to provide
module. The Tellabs 8606 aggregator can be used in MTU/MDU IP/MPLS intelligence.
application with Tellabs 8600 system or as a port extendion shelf
in front of a Tellabs 8600 switch element. Additionally a stand
The Tellabs 8606 Ethernet Aggregator as
alone Ethernet network for instance a DCN network can be built
a port extension shelf
with Tellabs 8606 aggregators.
The Tellabs 8606 aggregator can be used as a cost-efficient
Fast Ethernet port extension shelf for the Tellabs 8620 switch as
MTU/MDU traffic aggregation with the Tellabs 8606 well as for the Tellabs 8660 switch. In situations where more
aggregator consumer and small and medium-sized enterprise end-customer
In MTU aggregation the Tellabs 8606 aggregator grooms connections need to be aggregated within the IP/MPLS network,
traffic from multiple customers in an MTU/MDU environment. while simultaneously providing direct connectivity for high-end
The end-customers targeted for this application are both private business customers, the Tellabs 8606 aggregator can be deployed
Internet access customers and business customers from SOHO to decrease the total infrastructure investment cost. The same
to small and medium-sized enterprises. network location can thus be optimized from a port-density and
service variety point of view.
Uplink
PoP
2 DATA SHEET TELLABS 8606 ETHERNET AGGREGATOR
Network management Multicasting and Broadcast Storm Control Optimize Bandwidth Utilization
The Tellabs 8606 aggregator is managed with the Tellabs 8000 The IGMP snooping feature forwards traffic to only those subscribers
Network Manager, which offers centralized end-to-end monitoring, requesting multicast traffic. This prevents unnecessary forwarding of
configuration and provisioning capabilities for all the way to the end- multicast traffic to all subscribers, therefore optimizing bandwidth
customer access port of the Tellabs 8606 aggregator. A cut-through utilization for higher-bandwidth applications such as broadcast video.
link is provided to the built-in Web-based element management of The broadcast storm control gives system administrators the choice to
the Tellabs 8606 aggregator. The Tellabs 8000 manager either forward or discard broadcast packets created by malicious or
management concept provides fast and easy service provisioning runaway applications, enhancing bandwidth utilization by preventing
and service reconfiguration over all Tellabs 8600 system network unnecessary waste of bandwidth.
elements. Additionally, unique Packet Loop Test functionality is
supported to verify connectivity automatically within the created VPN. Access Control Enhances Network Security
The Tellabs 8606 aggregator solution not only supports
Element features 802.1x port-based access control for subscriber authentication but
Modularity Provides Flexibility for Connectivity also allows system administrators to designate a limited number of
MAC addresses able to access the network from a particular port.
With the recent growth of Gigabit Ethernet in metropolitan, regional
This feature, which denies unauthorized devices communication
and access networks, SFP expansion modules provide unparalleled
through the switch, highly enhances network security. The Tellabs
flexibility for supporting a wide variety of uplink infrastructures while
8606 aggregator also supports the ability to limit the number of users
maintaining a competitive price/performance ratio.
(MAC addresses) that can simultaneously access the network on a
per-port basis, allowing service providers to offer flexible billing plans.
Enhanced Firmware Improves Differentiation
The IEEE 802 standards-based firmware provides a rich set of
features and ensures interoperability with equipment from other
vendors. Additionally, the firmware includes advanced features such
as IGMP snooping, broadcast storm control and MAC address
filtering to enhance security and bandwidth utilization.
Multicasting
Fast Ethernet
IGMP snooping
24 10/100 Mbps Fast Ethernet Ports:
IEEE 802.3 10BASE-T Ethernet
(twisted-pair copper) QoS and Traffic management
IEEE 802.3u 100BASE-TX Fast Eight egress queues per port
Ethernet (twisted-pair copper) SP and WFQ scheduling
Auto-negotiating, automatic cable sensing Ingress and egress port rate limiting
(auto-MDIX) Ethernet RJ-45 ports with Classification and rate limiting (at 1Mbps
Back pressure flow control in half increments) based on combination of L2/
duplex mode L3/L4 fields using ACL
IEEE802.3x flow control in full duplex
mode
4 DATA SHEET TELLABS 8606 ETHERNET AGGREGATOR
North America Asia Pacific Europe, Middle East & Latin America & Statements herein may contain projections or other forward-looking statements
regarding future events, products, features, technology and resulting
Africa Caribbean
Tellabs Tellabs commercialor technological benefits and advantages. These statements are for
discussionpurposes only, are subject to change and are not to be construed as
One Tellabs Center 3 Anson Road Tellabs Tellabs instructions,product specifications, guarantees or warranties. Actual results may
1415 West Diehl Road #1401 Springleaf Tower Abbey Place 1401 N.W. 136th Avenue differ materially.
Naperville, IL 60563 Singapore 079909 2428 Easton Street Suite 202 The following trademarks and service marks are owned by Tellabs Operations,
U.S.A. Republic of Singapore High Wycombe, Bucks Sunrise, FL 33323 Inc., or its affiliates in the United States and/or in other countries: TELLABS ,
TELLABS and T symbol , and T symbol .
+1 630 798 8800 +65 6215 6411 United Kingdom U.S.A.
Fax: +1 630 798 2000 Fax: +65 6215 6422 HP11 1NT +1 954 839 2800 Any other company or product names may be trademarks of their respective
+44 870 238 4700 Fax: +1 954 839 2828 companies.
Fax: +44 870 238 4851 2007 Tellabs. All rights reserved.
74.1509E Rev. B 04/07