Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Examination Circular No. 227 of 2017 T.E. (All Branches) August, 2017.
Programme of T. E. [All Branches ( In Semester- I ) 2015 Course]
Examinations, August, 2017
1. Candidates are required to present at the Respective College of the examination, FIFTEEN
MINUTES before the time of the first paper and TEN MINUTES before the time of each
subsequent paper.
2. Candidates are forbidden from taking any material into the examination hall that can be
used for malpractice at the time of examination.
3. No request for any special concession such as a change in time or any day fixed for the
University Examination on religious or any other ground shall be granted.
4. Candidates are requested to see the Notice Board at their place of examination regularly for
changes if any that may be notified later in the programme.
5. Candidates are requested to note the Day, Date & Time of every paper on every day.
7. Candidates please refer to rules & regulations of examination for appearance & passing
criteria.
8. The exchange or loan of side-rules, drawing instruments of other materials used in the
examination hall is not permitted while the examinations are is process. Candidates must
bring their own instruments and will not be allowed to borrow from each other under any
circumstance.
Tuesday, Hydrology and water # Design of Machine Numerical Methods # Design of Machine
08/08/2017 resource engineering. Elements-I & Optimization Elements
( 301001 ) ( 302041 ) ( 302047 ) ( 316481 )
Wednesday, Infrastructure Engineering
09/08/2017
Heat Transfer * Heat Transfer * Heat Transfer
and Construction Techniques
( 302042 ) ( 302042 ) ( 302042 )
( 301002 )
Thursday, # Structural Design-I Theory of Machines-II Mechatronics * Theory of Machines-II
10/08/2017 ( 301003 ) ( 302043 ) ( 302050 ) ( 302043 )
Friday, Applied Computer Automotive Electrical &
Structural Analysis-II Turbo Machines
11/08/2017 Aided Engineering Electronics
( 301004 ) ( 302044 )
( 302061 ) ( 316482 )
Saturday, Metrology and Quality * Metrology and Quality
Fluid Mechanics-II # Machine Design
12/08/2017 Control Control
( 301005 ) ( 302062 )
( 302045 ) ( 302045 )
Day & Date T.E. (Electrical ) T.E. (E & Tc ) T.E. (Electronics) T.E. (Instru. & Control )
(2015 Course) (2015 Course) (2015 Course) (2015 Course)