Sei sulla pagina 1di 4

high performance machines

Compact lightweight and practical design makes the portable 230V IRON MIG 201- 221 - 221P ideally suited for all site-work
and workshop applications.

A large clear user-freindly Digital Screen provides the operator with coherent parameter information.

The machine is extremely compact, reliable and lightweight, with a built-in wire feeding device for 5 and 15 kg coil.

The IRON-MIG 221P digital operating concept , encoroprates Stepless Synergic Technology providing for simple selection of PULSE
MIG/MAG welding for Stainless Steel, Mild Steel, Aluminium and Cusi 3 Brazing.

The IRON-MIG 221P also include PAW programs for thin material thicknesses from 1 to 2mm.

For more informations please visit our website www.stelgroup.it


ord contact us by info@stelgroup.it / 0444 639525
UNLIMITED
CONTROL
st-arc is the intelligent control
of the Short Arc process, capable of
handling automatically all the varia-
tions in the welding process.

The result is a short, concentrated and stable arc at 100%, a colder welding, a signi-
ficantly lower heat and less deformation, less welding spatters and reduction post
treatments.
st-arc is a standard feature of MIG / MAG Stel welders.

st-arc
AUTO - COMPENSATION: GAP BRIDGING:
Automatically compensates for any variation in Charateristics of the IRON-MIG Short-Arc welding
welding conditions caused either by irregularities of process is perfect for root welding and the welding
the workpiece or the movements of the operators of thin material where gaps need to be bridged, with
hand. Ideal for awkward angles. little or no distortion.

Fe 3mm
5mm

start control: LIGHT GAUGE MATERIALS:


The approach speed of the wire to the piece and The Short-Arc welding process presents a soft stable
welding dynamics are synergic and provide limit arc charateristic at low parameters. The Short-Arc
spatters at the start with every material.The dynamic Dynamics result in minimal spatter levels, reduced
synergic technology provides for an extremely Heat Affected Zone, good bead appearance, even
smooth, spatter free Arc Ignition with all materials. penetration, less distortion and re-working.
UNLIMITED
PRECISION
PAW is Precision Aluminium Welding. A new intelligent arc welding control on
very thin thicknesses from 1 to 2mm.
The result is very short and concentrated welding
arc with the use of 1.0mm wire.
It is therefore possible to save the expensive push-
pull torches and avoiding small wire diameters that
are difficult to find and expensive.
(Only for 221P)

p.a.w.
PROGRAMS: PULSE:
There are 12 programs dedicated to aluminum. The synergic pulse preset by the program helps the
Programs are synergic and pulsed. Two PAW operator in welding materials such as aluminum.
programs (AlMg5 and AlSi5) are available for thin
material thicknesses from 1 to 2mm.

short arc: AlumiNUM:


The PAW programs allow to obtain a short, highly Thanks to PAW technology, the IRON-MIG 221P
concentrated arc by helping the operator during power source can weld with AlMg5 and AlSi5
welding of thin materials. The absence of spatters aluminum wires , avoiding the use of expensive
makes welding very clean and controlled. push-pull torches and small diameter wires
cod. 6960800000
technical Data: Iron-mIG 201 Iron-mIG 221/221P
Main Voltage 230/240 V 230/240 V Earth Cable 16 mm 25 mm
Phase 1 1 Degree of Protection IP 23 IP 23
Frequency 50/60 Hz 50/60 Hz Insulation Class H H
No Load Voltage 76 V 76 V Cooling Air Air
Efficency 83 % 83% Work Temperature 40C 40C
Current Range 20-190 A 15-200 A Length/Width/Height (mm) 500x250x390 500x250x390
Wire Feed Rollers 2 2 Weight 18 Kg 19,5 Kg
Welding Current 35% (40C) 180 A (30%) 200 A
Welding Current 60% (40C) 110 A 140 A
Welding Current 100% (40C) 90 A 120 A
The date is measured at an environment temperature of 40 C

main accessories

TROLLEY MPL ALUMINIUM KIT


The practical Trolley allows the movement of the Complete Set-up Kit for welding aluminium.
Power Source in every condition of soil in safety
and ease.

Cod. 600514000L Cod. 6013910000L

SPOOL GUN KIT FLUEX CORED ROLLERS


Ideal for the use of soft wires (aluminum). Cod. 6349800000

SPOOL FLUXED CORED


Cod. 600513000L 5Kgs Spool of flux cored no gas wire.
Cod. 6085800000

Spool Holder 2,5KG d.100mm Spool Holder 5KG d.200mm

Cod. 601411000L Cod. 601412000L

REMOTE FOOT CONTROL TIG TTSE Torch


WITH 4M CABLES

Cod. 600102000L Cod. 6060900000

MIG/MAG TORCH EARTH CLAMP 25MM


Mig/Mag professional Torch Earth Clamp with 3m 25mm rubber cable
Cod. 6099600000

TORCIA MIG/MAG H2O


Mig/Mag professional Torch
Cod. 6006950000 Cod. 602040000L

WATER COOLER MP WATER COOLER PLUG


Cooling System for TIG and MIG/MAG Water Cooler Plug KIT. Schuko Plug to ILME
water torch. connections 4 pin.

Cod. 600342000L
Cod. 601413000L
WATER EXTENSIONS TUBE GAS REGULATOR 2 GAUGES
Water Extensions Tube Gas Regulator with 2 Gauges
(Italian Gas Connection)

Cod. 601408000L Cod. 6055900000

Potrebbero piacerti anche