Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Once fabric is in-house, the weight of the whole bunch of fabric is taken and noted, and
compared with the approved ones, which is the suppliers invoice for any variations.
Before the inspection begins, the fabric QC will be handed swatch cards and shade cards
provided by the merchandiser. Then the inspection begins:
Initially the GSM is weighed when the fabric is open. After its initial check it goes for a 24 hour
relaxation period.
This step is mandatory. Due to atmospheric conditions & moisture, weaves tend to contract and
come closer to each other. So the weight and GSM would vary and change.
Next day, GSM is measured again. This is regarded and taken as the final GSM of the fabric.
4 point system:
Calculation where standardized formula is given as to how much fabric defects can be passed
Holes, missing lines, weaving defects, print defects, deadly irremovable stains cant be
corrected.
Gsm, what kind defect, what length they were found in, is it passed, if it is passed then how
come, calculation of percentage
If it is green, when the cut plan comes they can issue it as per priority
If it is red high authorities take a call