Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
!Important Notice
#################################################### !
!before executing "steps for ZERO displacement " , you must do the following:
################################################## !
----------------------------------------!
/PREP7
*!
UPGEOM,1,1,80,'FILE','rst ','
!Adds displacements from a previous analysis and updates the geometry of the finite
element model to the deformed configuration.
*!
!EPLOT
! ASEL,S, , , 1
! NSLA,S,1
! NPLOT
! ESEL,S,MAT,,1
! NSLE,S
! EPLOT
1!Show symbol.
! EPLOT
! NSEL,R,LOC,x,0
! NSEL,R,LOC,x,30
FINISH
/SOL
! nsel,s,loc,y,1
*!
/GO
! NSLE,S
!EPLOT
*!
ANTYPE,0
!OFF Ignores large-deflection effects (that is, a small-deflection analysis is specified). This
option is the default.
!ON Includes large-deflection (large rotation) effects or large strain effects, according to
the element type.
TIME,1.0
=1!default
!pstres,on
!unsym= Use full Newton-Raphson with unsymmetric matrices of elements where the
unsymmetric option exists.
neqit,100 !Specifies the maximum number of equilibrium iterations for nonlinear analyses .
SAVE
SOLVE
SAVE
0000000000000000000!
====================================================!
!showing the spring back
=======================================================!
*create,mypost,mac ! create POST1 macro for sheet metal blank plots
fini
/clear
/filnam,FILE
resume
! esel,s,mat,,1
!ASEL,S, , , 1
!NSLA,S,1
! NPLOT
/post1
set,last
plnsol,u,sum,2
/ui,raise
/ui,copy,save,png,,,norm,portrait,no
=============================================!
===========!
mypost
===============!