Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Technical Description
Document Revision 13
March 2012
Notice
This document contains information that is proprietary to Ceragon Networks Ltd. No part of this
publication may be reproduced, modified, or distributed without prior written authorization of
Ceragon Networks Ltd. This document is provided as is, without warranty of any kind.
Registered Trademarks
Ceragon Networks is a registered trademark of Ceragon Networks Ltd. FibeAir is a registered
trademark of Ceragon Networks Ltd. CeraView is a registered trademark of Ceragon Networks
Ltd. Other names mentioned in this publication are owned by their respective holders.
Trademarks
CeraMap, ConfigAir, PolyView, EncryptAir, and CeraMon are trademarks of Ceragon
Networks Ltd. Other names mentioned in this publication are owned by their respective holders.
Statement of Conditions
The information contained in this document is subject to change without notice. Ceragon
Networks Ltd. shall not be liable for errors contained herein or for incidental or consequential
damage in connection with the furnishing, performance, or use of this document or equipment
supplied with it.
Information to User
Any changes or modifications of equipment not expressly approved by the manufacturer could
void the users authority to operate the equipment and the warranty for such equipment.
Table of Contents
1. About This Guide.............................................................................................. 5
2. Target Audience
This manual is intended for use by Ceragon customers, potential customers,
and business partners. The purpose of this manual is to provide basic
information about the FibeAir 1500HP/RFU-HP for use in system planning.
3.1.3 EMC
System EMC and ESD requirements comply with the conditions specified
in EN 300 385 [9], for class B.
TX
350MHz IF TX TX Pre-
PA
chain Amp
Controller and
FSK peripherals DC / CTRL
Quadplexer
C C TCXO
RF LPBK
o o
n n
-48V
PSU
n n
e e RX
c c RX
LNA Extention port
combiner chain RX Main
140MHz t t
o o
r r RX
RX
LNA
chain RX Diversity
10M
diplexer
XLO
XPIC SW
Antenna
VCO
Diversity
IF & controller Board
RX
Chassis
IDU XPIC source
(Ntype conn.) sharing \ RSL ind.
(TNC conn.)
TX
350MHz IF TX TX FMM FLM
chain
Controller and
FSK peripherals DC / CTRL
Quadplexer
C C TXCO
RF LPBK
o o
n n
-48V
PSU
n n
e e RX
c c RX
LNA Extention port
chain RX Main
140MHz t t
o o
r r
10M
diplexer
XLO
XPIC SW
VCO
IF & controller Board
RX Board
Chassis
IDU XPIC source
(Ntype conn.) sharing \ RSL ind.
(TNC conn.)
TX
350MHz IF
TX
TX Pre-
RFIC PA
chain Amp
C C
(BMA conn.)
o o
IDU
n n 40M
RF LPBK
e e
c c
sharing \ RSL
-48V
XPIC source
(BMA conn.)
PSU section t t
ind.
o o RX
RX
r r RX
RFIC chain LNA Extention port
140MHz
40M
diplexer
XLO
XPIC SW
VCO
PSC TRX
Chassis
XPIC source
sharing \ RSL ind.
(TNC conn.)
Note that the main differences between the 1500HP 1RX and RFU-HP 1RX are:
RFU-HP offers higher TX power for split mount
The RFU-HP 1RX offers full support for 3.5M-56MHz channels.
The RFU-HP 1RX supports the green-mode feature
Both systems are fully compatible with all OCB and ICB devices.
1
1500 HP (11 GHz ) 40 MHz bandwidth does not support IF Combining. For this frequency,
space diversity is only available via BBS.
Ceragon Proprietary and Confidential Page 12 of 52
FibeAir 1500HP/RFU-HP Technical Description
The following block diagrams show the difference between the two OCBs and
the additional Diversity Circ block which is added in some diversity
configurations.
Old OCB Type 1
Notes:
(c) Radio Carrier
CCDP Co-channel dual polarization
SP Single pole antenna
DP Dual pole antenna
In addition, the following losses will be added when using these items:
6.1.1 Subrack
The subrack hosts all the RFU components and connections, as shown in the
previous figure.
The subrack includes up to five RFUs per subrack (each RFU connects to an
ICB).
RFU with Branching
6.1.3 RF Filters
The RF Filters are used for specific frequency channels and Tx/Rx separation.
The filters are attached to the ICB, and each RFU contains one Rx and one Tx
filter.
In an IFC Space Diversity configuration, each RFU contains two Rx filters to
combine the IF signals, along with one Tx filter.
The ICC sums the Rx and Tx signals and combines the N channels to the output
ports (one or two, in accordance with the configuration).
19 Rack Example
When a configuration includes more than ten carriers, two racks are
assembled and connected.
Configuration with More than Ten Carriers Two Connected Racks
1+1
2+1 3+1 4+1
Configuration Interfaces 1+0 FD
3+0 4+0 5+0
2+0
6L 4
6H 4.5
WG losses per 100m
7/8GHz 6
11GHz 10
Added to adjacent
Symmetrical Coupler 3
channel configuration
All-Indoor Tx and Rx 0.3 (1c) 0.3 (1c) 0.7 (2c) 0.7 (2c) 1.1 (3c)
CCDP with DP antenna
Diversity RX 0.2 (1c) 0.2 (1c) 0.6 (2c) 0.6 (2c) 1.0 (3c)
Tx and Rx 0.3 (1c) 0.7 (2c) 1.1 (3c) 1.5 (4c) 1.9 (5c)
SP Non adjacent channels
Diversity RX 0.2 (1c) 0.6 (2c) 1.0 (3c) 1.4 (4c) 1.8 (5c)
CCDP with DP antenna Tx and Rx 0.3 (1c) 0.7 (1c) 1.1 (2c) 1.1 (2c) 1.5 (3c)
Upgrade Ready Diversity RX 0.2 (1c) 0.6 (1c) 1.0 (2c) 1.0 (2c) 1.4 (3c)
CCDP with DP antenna Tx and Rx 1.5 (3c) 1.9 (4c) 1.9 (4c) 2.3 (5c) 2.3 (6c)
Upgrade Ready Diversity RX 1.4 (3c) 1.8 (4c) 1.8 (4c) 2.2 (5c) 2.2 (6c)
Main Configurations
1+0
1+0 East West
1+1
1+1 East West
1+1 HSB Compact Front View
1A. The default PDU which is assembled with the ETSI rack has a special
addition of a plastic cover.
For special cases, when PDU protection is required, a PDU with plastic
protection cover can be provided.
The PN for this PDU with protection cover is: 32T-PDU_CVR.
2
Over temperature.
Ceragon Proprietary and Confidential Page 39 of 52
FibeAir 1500HP/RFU-HP Technical Description
QPSK 30 27 33 30 33
8 PSK 30 27 33 30 33
16 QAM 30 27 33 30 33
32 QAM 30 26 33 29 33
64 QAM 29 26 32 29 32
128 QAM 29 26 32 29 31
256 QAM 27 24 30 27 30
U6 GHz 6.4-7.1
7GHz 7.110 to 7.750
8 GHz 7.725 to 8.275
1500HP 11 GHz 10.7 to 11.7
Modulation Channel spacing Occupied 1500HP & IP-10G RFU-HP & IP-10G
BW 99%
QPSK 20MHz(FCC) 18 MHz -88.9 -89.9 -89.4
8 PSK -83.7 -84.7 -84.2
16 QAM -81.4 -82.4 -81.9
32 QAM -78.7 -79.7 -79.2
64 QAM -76.1 -77.1 -76.6
128 QAM -73.6 -74.6 -74.1
256 QAM -70.6 -71.6 -71.1
256 QAM -67.7 -68.7 -68.2
QPSK 28MHz 26MHz -88.1 -89.1 -88.6
8 PSK -84.0 -85.0 -84.5
16 QAM -81.7 -82.7 -82.2
32 QAM -77.0 -78.0 -77.5
64 QAM -75.0 -76.0 -75.5
128 QAM -70.6 -71.6 -71.1
256 QAM -70.0 -71.0 -70.5
256 QAM -67.0 -68.0 -67.5
QPSK 30MHz(FCC) 27.5 MHz -87.8 -88.8 -88.3
8 PSK -83.0 -84.0 -83.5
16 QAM -79.1 -80.1 -79.6
32 QAM -74.6 -75.6 -75.1
64 QAM -73.0 -74.0 -73.5
128 QAM -70.8 -71.8 -71.3
256 QAM -68.7 -69.7 -69.2
256 QAM -64.6 -65.6 -65.1
QPSK 40MHz (ETSI) 36.5MHz NA -86.9 -86.4
8 PSK NA -81.4 -80.9
16 QAM NA -78.9 -78.4
32 QAM NA -75.1 -74.6
64 QAM NA -71.9 -71.4
128 QAM NA -70.7 -70.2
256 QAM NA -68.4 -67.9
256 QAM NA -65.8 -65.3
Modulation Channel spacing Occupied 1500HP & IP-10G RFU-HP & IP-10G
BW 99%
QPSK 40MHz (FCC) 36.5MHz NA -86.9 -86.4
8 PSK NA -81.4 -80.9
16 QAM NA -78.9 -78.4
32 QAM NA -75.1 -74.6
64 QAM NA -71.9 -71.4
128 QAM NA -70.7 -70.2
256 QAM NA -68.4 -67.9
256 QAM NA -65.8 -65.3
QPSK 50MHz 47MHz NA -87.1 -86.6
8 PSK NA -82.5 -82.0
16 QAM NA -79.9 -79.4
32 QAM NA -76.1 -75.6
64 QAM NA -73.3 -72.8
128 QAM NA -70.8 -70.3
256 QAM NA -68.1 -67.6
256 QAM NA -65.3 -64.8
QPSK 56MHz 52MHz NA -86.4 -85.9
8 PSK NA -81.1 -80.6
16 QAM NA -80.0 -79.5
32 QAM NA -75.8 -75.3
64 QAM NA -73.5 -73.0
128 QAM NA -70.5 -70.0
256 QAM NA -68.1 -67.6
256 QAM NA -65.1 -64.6
RFU Models
Diversity/Non-Diversity Split-Mount
Space Diversity IFC (2Rx) (6, 7, 8 ,11GHz) 15OCBf-SD-xxxY-ZZZ-H/L
Non Space Diversity (1Rx) (6, 7, 8GHz) 15OCBf-xxxY-ZZ-H/L
11GHz Non Space Diversity (1Rx)3 15OCB11w-xxxY-ZZ-H/L
3
11GHz OCB is a wide BW OCB which supports up to 40MHz, while the other OCBs (6L, 6H, 7,
8GHz) support up to 30MHz.
4
11GHz OCB is a wide BW OCB which supports up to 40MHz, while the other OCBs (6L, 6H, 7,
8GHz) support up to 30MHz.
Ceragon Proprietary and Confidential Page 48 of 52
FibeAir 1500HP/RFU-HP Technical Description