Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Twin screw and barrel are the heart of extruders and play very crucial role in extruder.
Radhekrishna Extrusions screws and barrels are manufactured under very precise stage
wise inspection and quality check system. The company has all advance in house
facilities to manufacturer the screw and barrels. The cast experience , technical know
how and entrepreneur skill have made the company renewed in manufacturing screw
and barrel in the field.
Radhekrishna Extrusions following & believe in STAGE BY STAGE INSPECTION & doing by
having very educated Quality Control Department & staff. Also having technically
knowledgeable labors. Our policy no.1 is to provide best service to our all customers.
CONICAL TWIN SCREW AND BARREL :
Radhekrishna Extrusions manufactures twin screw and barrels starting
form 35mm to 110mm . Radhekrishna Extrusions manufactures screws
and barrels according to present market needs like higher filler, low
filler, application and ISI grade. We Radhekrishna Extrusions follow all
standard manufacturing process and adhere all standard norms of
manufacturing. We are manufacturing screw & barrel as per CMT ,
KMD Design.
PARALLEL TWIN SCREW AND BARREL :
Radhekrishna Extrusions manufactures twin screw & barrels starting from
20mm to 150mm screw diameter. We are also manufacturing screw & barrel
As per Kolsite , Windsor, TTS (Thayson) design.
SINGLE SCREW & BARREL
Radhekrishna Extrusions manufactures single screws and barrels starting from
20mm to 150mm screw diameter.
Application :
o LDPE / HDPE / PP Film
o Raffia / Mono Filament Application
BARRIER SCREW
The barrier screw design separates melted material from un- melted solid material
Into separate channels. This unique mixing feature thoroughly homogenizes the
Melt with little or no increase in its average temperature. Mixing is achieved with an
Undulating root profile in the metering zone of the screw.
Applications:
o LDPE / HDPE / PP Film
o ABS
o PVC Cable
o PVC Pipe & PVC Profile
MADDOC - BARRIER SCREW
Application :
o HDPE Pipes
o XLPE Cables
Maddoc
o Lay Flat Pipe
o LDPE Tubing
o PP Film
After Many years of experience & research & development , we have found
new technology , which we have described below :
Screw & Barrel made out of EN -41B (Moscow make steel),Nitride steel.
The material is T conditioned by thermal process.
Screw profile is done on thread milling machine.
Honing of barrel is done to achieve superior internal bore surface finish.
Screw is highly polished by special purpose polishing machine.
Stabilizing is done to remove all stresses developed.
Screw & Barrel is nitride harden ,skin hardness maintain 68 to 70 HRC.
Nitrided layer thickness maintained up to 0.47 to 0.50
Screw will be straight with in 0.07 m. m. on turn over by hydraulic press.
Close clearance and exacting machining tolerance for screw and barrel.
All the procedures are done under Strict Quality Control
Procedure of Screw
Raw Material (We are using EN-41B (Moscow-Steel) Material.)
Blank Operation (It is used for Pre Stage machining for zone
wise flight cutting)
Spline Cutting (As per Gear Box Spline Screw is used to Spline for
Windsor and Kolsite Design.)
Procedure of Screw
CNC Machine
Inspection (We check that every thing is done in proper way or not
until previous process.)
Rough Bore (This Process is used to make bore on Deep Gun drill Machine.)
Final Bore (In this Process we can get Final Size of Bore.)
Hopper Mounting Cutting & Vent Cutting (This process is used for material
feeding and Vent Cutting)
Procedure of Barrel
Nitriding (It is used to maintain hardness of Barrel.)
We have our own Nitriding furnace at our work place.
Procedure of Barrel
Third Inspection