Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
(866) 459-5700
BALANCING MACHINES VIBRATION ANALYZER CALIBRATION AND SERVICE BALANCING SERVICES TIPS & TRICKS LINKS CONTACT
Rotor Dimensions
Machine Base
96 inch (2438 mm) long x 36 inch (914 mm) wide. Total width of machine with drive is 80 inches (2032
mm). Extra base eliminates any work piece length limitations.
Base Installation
http://www.dynamicsresearch.net/products/balancing_machines/610 1/2
7/13/2017 10,000 lbs capacity
No special foundation required. Bolt to any concrete floor with the capacity to safely support a maximum
loaded machine with the motion during operation.
(2) Each Support supplied with (1) 021-DP Direct Prod High Output Electrodynamic Transducer.
Calibration traceable to N.I.S.T.
High capacity anti-friction roller carriages with self aligning, gimble action feature to provide precise line
contact between flat rollers and rotor journals.
Optional offset carriers with babbit lined V block bearings are available for short shafts and light loads
Each upright support moves on roller carriers. Pedestals are locked to the base using lever assemblies
that are hand operated.
Instrumentation
An advanced performance computer system preinstalled with Windows XP Pro, and including a 17"
monitor,
keyboard, mouse and printer. Also including, our latest Windows based balancing program featuring
user-friendly report ,menu driven operations and a full page printout, driven by our new 24 bit digital
signal processor using USB technology.
The use of trial weights establish the true effect of a known unbalance at a specific correction plane on
the work piece. Thus the machine is calibrated each time you use it. This operation requires two runs
but the influence coefficients derived from this procedure aid in minimizing cross-effect and can be saved
so that future rotors with the same geometry and mass can be balanced in just one run.
Copyright 2017 Dynamics Research, 3778 Timberlake Drive, Richfield, OH 44286 (330) 523-5210
http://www.dynamicsresearch.net/products/balancing_machines/610 2/2