Sei sulla pagina 1di 120

- Captulo 33 1 Ondas Eletromagnticas

Essa verso simplificada da Eq. 33-49 conhecida como lei de Brewster. Como o n-
gulo d e Brewster, a lei de Brewster recebeu esse nome em homenagem a Sir David
Brewster (1781-1868), o cientista escocs que a descobriu experimentalmente em
1812.

REVISO E RESUMO
Ondas Eletromagnticas Uma onda eletromagntica
formada por campos eltricos e magnticos vari:-w is. As v- F = 2/A (incidncia perpenrlicular e reflexo total). (33-33)
e
rias freqncias possveis de ondas eletromagnticas consti-
tuem um espec1ro, do qual uma pequena parte constitui a luz A presso da radiao p, a fora por unidade de rea:
visvel. Uma onda eletromagntica que se propaga na direo l
do eixo x possui um campo eltrico e um campo magntico B P, = -c (absoro total) (33-34)
cujos mdulos dependem de x e t:
E = Em sen(kx - wt) 21
e p, =- (incidncia perpendicular e reflexo total). (33-35)
B = Bm scn(kx - wt), e
e (33-1, 33-2)

onde E m e Bm so as amplitudes de e B. O campo eltrico induz Polarizao Dizemos que uma onda eletromagntica po-
o campo magntico e vice-versa. A velocidade de qualquer onda larizada quando o vetor campo eltrico se conserva sempre
eletromagntica no vcuo e, que pode ser escrita como no mesmo plano, que chamado de plano de oscilao. A luz
produzida por uma lmpada comum no polarizada; dize-
c = -E
=--- 1 (33-5, 33-3)
mos que uma luz desse tipo no-polarizada ou polarizada
8 ,/f.-loF:11 ' aleatoriamente.

onde E e B so os mdulos dos campos em um instante qualquer. Filtros Polarizadores Quando se faz a luz passar por um
filtro polarizador apenas a componente do campo eltrico pa-
Fluxo de Energia A taxa por unidade de rea com a qual a ralela direo de polarizao do filtro transmitida; a com-
energia transportada _J;)Or uma onda eletromagntica dada ponente perpendicular direo de polarizao absorvida
pelo vetor de Poynting S: pelo filtro. A luz que emerge de um filtro polarizador est po-
- 1 - _. larizada paralelamente direo de polarizao do filtro.
S=-E x B. (33-19) Quando a luz que incide em um filtro polarizador no-po-
f.-lo larizada a intensidade da luz transmitida, 1, metade da intensi-
A direo de S (que tambm a diryo de propagao da onda dade original 10:
e a direo do fluxo de energia) perpendicular s direes de
(33-36)
e B. A taxa mdia por unidade de rea com a qual a energia
transportada, Smd, chamada de intensidade da onda e represen- Quando a luz que incide no filtro polarizador j est polarizada a
tada pelo smbolo 1: intensidade da luz transmitida depende do ngulo e entre a dire-
o de polarizao da luz incidente e a direo de polarizao do
l 1
= --E,111,,
2
(33-26) filtro:
Cf.-lo
I = / 0 cos 2 9. (33-38)
onde E, 111, = E11,I 2 . Uma fonte ponrual de ondas eletromagnti-
cas emite as ondas isotropicamente, isto , com igual intensidade
tica Geomtrica tica geomtrica o tratamento apro-
em todas as direes. A intensidade das ondas a uma distncia r
ximado da luz no qual as ondas luminosas so representadas
de uma fonte pontual de potncia P s dada por
como raios que se propagam em linha reta.
P,
/=-4 2' (33-27) Reflexo e Refrao Quando um raio luminoso encontra
7Tr
uma interface entre dois meios transparentes em geral apare-
cem um raio refletido e um raio refratado. Os dois raios esto
Presso da Radiao Quando uma superfcie intercepta sempre no plano de incidncia. O ngulo de reflexo igual ao
uma onda eletromagntica a onda exerce uma fora e uma ngulo de incidncia, e o ngulo de refrao est relacionado
presso na superfcie. Quando a radiao totalmente absor- ao ngulo de incidncia atravs da lei de Snell,
vida por uma superfcie perpendicular direo de propaga-
o a fora dada por (refrao), (33-40)

IA onde n 1 e n 2 so os ndices de refrao dos meios nos quais se pro-


F=- (absoro total), (33-32) pagam o raio incidente e o raio refratado.
c
onde l a intensidade da radiao e A a rea da superfcie. Reflexo Interna Total Uma onda que incide em uma in-
Quando a radiao totalmente refletida a fora dada por terface com um meio cujo ndice de refrao menor que o do
Perguntas m
meio no qual est se propagando experimenta reflexo interna Polarizaco por Reflexo Uma onda refletida total-
total se o ngulo de incidncia maior que um ngulo crtico mente polarizada, com o vetor E perpendicular ao plano de
ec dado por incidncia, quando o ngulo de incidncia igual ao ngulo de
Brewster 88 , dado por
(ngulo crtico). (33-44)
(ngulo de Brewster). (33-49)

1 Se o campo magntico de uma onda luminosa paralelo ao 6 Na Fig. 33-31 uma luz no-polarizada atravessa um conjunto
eixo y e seu mdulo dado por B, = B,,, sen(kz - lut), determine de cinco filtros polarizadores. As direes de polarizao dos fil-
(a) a direo de propagao da onda; (b) a direo do campo el- tros, medidas no sentido anti-horrio no sentido positivo do eixo
trico associado onda. y. so as seguintes: filtro 1, 35 ; filtro 2, O ; filtro 3, O ; filtro 4, 110 ;
2 A Fig. 33-28 mostra os campos eltrico e magntico de uma filtro 5, 45 . O filtro 3 sofre uma rotao de 180 no sentido anti-
onda eletromagntica em um certo instante. O sentido de propa- horrio. Durante a rotao, para que ngulos (medidos no sen-
gao da onda para dentro ou para fora do papel? tido anti-horrio no sentido positivo do eixo y) a transmisso de
luz pelo conjunto eliminada totalmente?

e FIG. 33-28 Pergunta 2.


z X

a 3 Na Fig. 33-lSa comece com um feixe de luz polarizada para-


lelamente ao eixo x e escreva a razo entre a intensidade final / 3
e a intensidade inicial / 0 na forma f i lo = A cos" e. Quais so os
TI valores de A, n e e quando giramos a direo de polarizao do
l- primeiro filtro (a) 60 no sentido anti-horrio; (b) 90 no sentido
l- horrio?
la 4 Suponha que o segundo filtro da Fig. 33-15a seja girado a partir
)-
de uma direo de polarizao paralela ao eixo y (e = O), termi- FIG. 33-31 Pergunta 6.
nando com a direo de polarizao alinhada com o eixo x (e =
)-
90 ). Qual das quatro curvas da Fig. 33-29 representa melhor a in- 7 A Fig. 33-32 mostra raios de luz monocromtica passando por
:i- tensidade da luz que atravessa o sistema de trs filtros em funo trs materiais, a, b e e. Coloque os materiais na ordem do ndice
do ngulo fJ durante essa rotao? de refrao, comeando pelo maior.
5)
a
e-
lo
FIG. 33-29 Pergunta 4.

8)
5 (a) A Fig. 33-30 mostra um feixe luminoso passando por um
filtro polarizador cuja direo de polarizao paralela ao eixo FIG. 33-32 Pergunta 7.
0-
as y. Suponha que o filtro seja girado de 40 no sentido horrio,
mantendo-se paralelo ao plano xy. Com a rotao, a porcenta- 8 A Fig. 33-33 mostra as reflexes mltiplas de um raio luminoso
gem da luz que atravessa o filtro aumenta, diminui ou permanece em um corredor de vidro no qual as paredes so paralelas ou per-
ra constante (a) se a luz incidente for no-polarizada; (b) se a luz pendiculares entre si. Se o ngulo de incidncia no ponto a 30 .
e- incidente for polarizada paralelamente ao eixo x; (c) se a luz inci- quais so os ngulos de reflexo do raio luminoso nos pontos b, e.
o dente for polarizada paralelamente ao eixo y ? d,e e.f?
ao
do

lO)

ro-

m-
do FIG. 33-30 Pergunta 5. FIG. 33-33 Pergunta 8.
9 As trs partes da Fig. 33-34 mostram a refrao da luz na inter- 11 A Fig. 33-36 mostra quatro placas horizontais A, B, C e D
face de dois materiais diferentes. O raio incidente (cinzento, na fi- feitas de materiais diferentes. com ar acima da primeira placa
gura) uma mistura de luz vermelha e azul. O ndice de refrao e abaixo da ltima. O ndice de refrao dos materiais dado.
aproximado para a luz visvel est indicado para cada material. Raios de luz incidem na extremidade esquerda das quatro placas,
Qual das trs partes mostra uma situao fisicamente possveP da forma indicada na figura. Em que placa (identifique-a atravs
do ndice de refrao) existe a possibilidade de que a luz fique
confinada de tal forma que, aps muitas reflexes, chegue extre-
midade direita sem deixar a placa?
n = 1,3

Ar
_,,Jv n = 1,5

' / 1,3 A

(a) (b) (e)


/ l,'i B

FIG. 33-34 Pergunta 9.


/ 1,4 e
/ 1,3 D
10 Na Fig. 33-35 a luz comea no material a, passa por placas feitas Ar
ele trs outros materiais com as interfaces todas paralelas entre si e
FIG. 33-36 Pergunta 11.
penetra em outra placa do material a. A figura mostra o raio in-
cidente e os raios refratados nas diferentes interfaces. Coloque os
materiais na ordem do ndice de refrao, comeando pelo maior. 12 O bloco da esquerda da Fig. 33-37 apresenta reflexo interna
total para a luz no interior de um material com ndice de refrao
n 1 quando existe ar do lado de fora do material. Um raio de luz
que chega ao ponto A vindo ele qualquer ponto da regio sombre-
ada da esquerda (como o raio que aparece na figura) sofre reflexo
total e termina na regio sombreada da direita. Os outros blocos
mostram situaes semelhantes para outros materiais. Coloque os
materiais na ordem do ndice ele refrao, comeando pelo maior.

FIG. 33-35 Pergunta 10. FIG. 33-37 Pergunta 12.

- O nmero de pontos indica o grau de dificuldade do problema


Informaes adicionais disponveis em O Circo Voador da Fsica, de Jearl Walker, Rio de Janeiro: LTC, 2008.

seo 33-2 O Arco-ris de Maxwell desses sinais de rdio fosse 1,0 X 104 raios terrestres, qual seria (a)
1 A partir da Fig. 33-2, determine (a) o menor e (b) o maior a freqncia e (b) o perodo da radiao emitida? Normalmente
comprimento de onda para o qual a sensibilidade do olho hu- as ondas eletromagnticas so muito atenuadas ao se propagar
mano igual metade da sensibilidade mxima. Determine tam- em materiais condutores ele eletriciclaclc, como a gua salgada.
bm (c) o comprimento ele onda, (d) a freqncia e (e) o perodo seo 33-3 Descrio Qualitativa de uma Onda
ela luz qual o olho humano mais sensvel. Eletromagntica
2 A que distncia elevem estar as mos de uma pessoa para 5 Qual o valor da indutncia que deve ser ligada a um capaci-
que estejam separadas por 1,0 nanossegundo-luz (a distncia que tar ele 17 pF em um oscilador capaz de gerar ondas eletromagn-
a luz percorre em 1,0 nanossegunclo )? ticas ele 550 nm (ou seja, dentro ela faixa da luz visvel)? Comente
a resposta.
3 Um certo Laser ele hlio-nenio emite luz vermelha cm uma
faixa estreita de comprimentos ele onda em torno ele 632,8 nm, 6 Qual o comprimento de onda ela onda eletromagntica
com uma "largura'' de 0,0100 11111. Qual a ''largura'' da luz emi- emitida pelo sistema oscilador-antena da Fig. 33-3 se L = 0,253
tida em unidades de freqncia? ,H e e= 25,0 pF?
4 O objetivo do Projeto Seafarer era construir urna gigantesca seo 33-5 Transporte de Energia e o Vetor de Poynting
antena subterrnea, com uma rea da ordem de 1O000 km 2, para 7 Alguns lasers de neodmio-vidro podem produzir 100TW de
transmitir sinais de rdio que pudessem ser captados por subma- potncia em pulsos de 1,0 ns com um comprimento de onda de
rinos a grandes profundidades. Se o comprimento ele onda efetivo 0,26 ,m. Qual a energia contida em um desses pulsos?
Problemas m
8 Uma onda eletromagntica plana tem um campo eltrico para a luz solar nessa altitude, supondo tratar-se ele uma onda
mximo ele 3.20 X 10- 1 V/m. Determine a amplitude cio campo plana.
magntico. . . 1 6 Uma onda eletromagntica com uma freqncia ele 4,00
9 Uma onda eletromagntica plana que se propaga no vcuo x l 0 1 Hz est se propagando no vcuo no sentido positivo do
no sentido positivo do eixo .r tem componentes E, = E, = O e eixo x. O campo eltrico ela onda paralelo ao eixo y e tem uma
E = (2,0 V/m) cos[11 X 10 15 1)(1 - x/c)J. (a) Qual a arrplitudc amplitude E 111 No instante 1 = O o campo eltrico no ponto P,

do campo magntico associado onda'? (b) O campo magntico situado sobre o eixo x. tem o valor ele + E 11,!4 e est diminuindo
oscila paralelamente a que eixo'7 (e) No instante em que o campo com o tempo. Qual a distncia. ao longo cio eixo x, entre o ponto
eltrico associado onda aponta no sentido positivo cio eixo z P e o primeiro ponto com E = O(a) no sentido negativo elo eixo x
em um certo ponto P do espao. em que direo aponta o campo e (b) no sentido positivo cio eixo x?
magntico no mesmo ponto? . . 17 Um avio que se encontra a uma distncia ele 10 km ele
10 Em uma onda ele rdio plana o valor mximo cio campo um transmissor de rdio recebe um sinal com uma intensidade de
eltrico 5.00 V/m. Calcule (a) o valor mximo do campo magn- 10 W/m 2 . Determine a amplitude (a) do campo eltrico e (b) do
tico; (b) a intensidade da onda. campo magntico associado ao sinal na posio do avio. (e) Se
11 Qual a intensidade de uma onda eletromagntica plana o transmissor irradia uniformemente ao longo de um hemisfrio,
se o valor de B 111 1.0 X 10- 4 T? qual a potncia ela transmisso?
18 Uma fonte pontual isotrpica emite luz com um compri-
12 Suponha (ele forma pouco realista) que uma estao de TV
se comporta como uma fonte pontual. isotrpica. transmitindo mento de onda ele 500 11111 e uma potncia ele 200 W. Um detector
com uma potncia de LO MW. Qual a intensidade do sinal ao de luz posicionado a 400 m ela fonte. Qual a mxima taxa dBldt
chegar s vizinhanas de Prxima do Centauro. a estrela mais pr- com a qual a componente magntica da luz varia com o tempo na
xima do Sistema Solar, que est a 4.3 anos-luz de distncia? (Uma posio do detector?
civilizao aliengena a essa distncia poderia assistir a Arquivo seo 33-6 Presso de Radiao
X ) Um ano-luz a distncia que a luz percorre em um ano. 19 Qual a presso ele radiao a 1,5 mele distncia ele uma
. . 13 O campo eltrico mximo a uma distncia de 10 m de uma lmpada ele 500 W? Suponha que a superfcie sobre a qual a pres-
fonte pontual isotrpica 2,0 V/m. Quais so (a) o valor mximo so exercida est voltada para a lmpada e perfeitamente
do campo magntico e (b) a intensidade mdia da luz a essa dis- absorvente. Suponha tambm que a lmpada irradia uniforme-
tncia da fonte? (e) Qual a potncia da fonte? mente em todas as direes.
. . 14 Frank D. Drake, um investigador cio programa SETI 20 Um pedao ele cartolina pintado de preto, totalmente ab-
(Search for Extra-Terrestrial Intelligence. ou seja, Busca de sorvente, de rea A = 2,0 cm 2, intercepta um pulso luminoso com
Inteligncia Extraterrestre), disse uma ve1. que o grande radiote- uma intensidade de 10 W/cm 2 produzido por uma lmpada estro-
lescpio de A recibo. em Porto Rico (Fig. 33-38), ' capaz ele de- boscpica. Qual a presso exercida pela luz sobre a cartolina?
tectar um sinal que deposite em toda a superfcie da Terra uma 21 Lasers de alta potncia so usados para comprimir plasmas
potncia de apenas um picowatt". (a) Qual a potncia que a an- (gases de partculas carregadas). Um laser capaz ele gerar pulsos
iena do radiotelescpio de Arecibo receberia ele um sinal como de radiao com uma potncia mxima ele 1.5 X 103 MW foca-
esse? O dimetro ela antena 300 rn. (b) Qual teria que ser a po- lizado cm 1,0 mm 2 de um plasma ele eltrons ele alta densidade.
tncia de urna fonte isotrpica situada no centro de nossa galxia Determine a presso exercida sobre o plasma se este se comporta
para que um sinal com essa potncia chegasse Terra? O centro como um meio perfeitamente refletor.
da galxia fica a 2,2 x 10 4 anos-luz de distncia. Um ano-luz a
distncia que a luz percorre em um ano. 22 A luz cio SoL no limite superior da atmosfera terrestre, tem
uma intensidade de 1,4 kW/111 2 . (a) Supondo que a Terra (e sua
atmosfera) se comporta como um disco plano perpendicular aos
raios solares e que toda a energia incidente absorvida, calcule
a fora exercida sobre a lerra pela radiao. (b) Compare essa
fora com a fora exercida pela atrao gravitacional do Sol.
r . . 23 Prove, para uma onda eletromagntica plana que incide
perpendicularmente em uma superfcie plana, que a presso
exercida pela radiao sobre a superfcie igual densidade ele
energia do feixe incidente. (Essa relao entre presso e densi-
dade de energia no depende da rcfletncia da superfcie.)
. . 24 Um laser tem uma potncia luminosa ele 5,00 mW e um
comprimento de onda ele 633 11111. A luz emitida focalizada (con-
centrada) at que o dimetro do feixe luminoso seja igual ao di-
metro de 1266 11111 ele uma esfera iluminada pelo laser. A esfera
a perfeitamente absorvente e tem uma massa especfica de 5,00 X
3 HJ3 kg/m 3 . Determine (a) a intensidade do feixe produzido pelo
FIG. 33-38 Problema 14. Radiotelescpio de Arecibo. (Cortesia laser na posio da esfera; (b) a presso exercida pela radiao do
da Cornell University) laser sobre a esfera; (e) o mdulo da fora correspondente; (d) o
e mdulo da acelerao que a fora imprime esfera.
e . . 15 A luz do Sol, no limite superior ela atmosfera terrestre, . . 25 Uma onda eletromagntica plana, com um comprimento
tem uma intensidade de 1,40 kW/m 2 . Calcule (a) E,,, e (b) B,,, ele onda de 3,0 m, se propaga no vcuo no sentido positivo do
eixo x. O campo eltrico, cuja amplitude 300 V/m, oscila para- ... 30 A intensidade 1 da luz emitida por uma fonte pontual
lelamente ao eixo y. Determine (a) a f reqncia; (b) a freqncia e isotrpica medida em funo da distncia r da fonte. A Fig.
angular; (e) o nmero de onda angular da onda; (d) a amplitude 33-40 mostra a intensidade I em funo do inverso do quadrado
do campo magntico associado onda. (e) O campo magntico da distncia, ,.- 2. A escala do eixo vertical definida por Is = 200
oscila paralelamente a que eixo? (f) Qual o fluxo mdio de W/m 2, e a escala do eixo horizontal definida por r; 2 = 8,0 m- 2 .
energia, em watts por metro quadrado, associado onda? A onda Qual a potncia da fonte?
ilumina uniformemente uma placa com uma rea de 2,0 m2 . Se a . . . 31 Quando um cometa se aproxima do Sol o gelo da su-
placa absorve totalmente a onda, determine (g) a taxa com a qual perfcie do cometa sublima, liberando ons e partculas de po-
o momento transferido placa e (h) a presso exercida pelara- eira. Como os ons possuem carga eltrica so empurrados pe-
diao sobre a placa. las partculas carregadas do vento solar e formam uma cauda de
26 Teoricamente u1m1 c::spaunavc:: podc::ria deslocar-se no ons, retilnea, que aponta radialmente para longe do Sol (Fig.
sistema solar usando a presso da radiao solar em uma grande 33-41). As partculas de poeira (eletricamente neutras) so em-
vela feita de folha de alumnio. Qual deve ser o tamanho da vela purradas para longe do Sol pela fora da luz solar. Suponha que
para que a fora exercida pela radiao seja igual em mdulo as partculas de poeira so esfricas, tm uma massa especfica
fora de atrao gravitacional do Sol? Suponha que a massa da de 3,5 X 10 3 kg/m 3 e so totalmente absorventes. (a) Que raio
espaonave, incluindo a vela, 1500 kg e que a vela perfeita- deve ter uma partcula para descrever uma trajetria retilnea,
mente refletora e est orientada perpencliculannente aos raios como a trajetria 2 da figura? (b) Se o raio da partcula maior
solares. Os dados astronmicos necessrios podem ser obtidos no que o valor calculado no item (a), a trajetria se encurva para
Apndice C. (Se for usada uma vela maior, a espaonave se afas- longe do Sol, como a trajetria 1, ou para perto cio Sol, como a
tar cio Sol.) trajetria 3?
. . 27 Urna pequena espaonave cuja massa 1,5 X 10 3 kg (in-
cluindo um astronauta) est deriva no espao, longe de qual-
quer campo gravitacional. Se o astronauta liga um laser de 10 kW
de potncia, que velocidade a nave atinge em 1,0 dia por causa do , , , l Cauda de; poeira
'\"',
momento associado luz do laser? , , .............
Sol
""28 Na Fig. 33-39 o feixe de um laser com 4,60 W de potncia
' ' ' o
..
'3 '--. 2
e D = 2,60 mm de dimetro apontado para cima, perpendicu-
larmente a uma das faces circulares (com menos de 2,60 mm de Corneta
dimetro) de um cilindro perfeitamente refletor, que mantido Cauda de; ons
suspenso pela presso da radiao do laser. A massa especfica do
cilindro 1,20 g/cm 3 . Qual a altura 1-l do cilindro? FIG. 33-41 Problema 31.

seo 33-7 Polarizao


l)-- 1

"32 Na Fig. 33-42 um feixe de luz no-polarizada, com uma in-


tensidade de 43 W/m 2 , atravessa um sistema composto por dois
filtros polarizadores cujas direes fazem ngulos 8 1 = 70 e
fJ2 = 90 com o eixo y. Qual a intensidade da luz transmitida
pelo sistema?

FIG. 33-39 Problema 28 .

. . 29 Pretende-se levitar uma pequena esfera, totalmente ab-


sorvente, 0,500 m acima de uma fonte luminosa pontual e isotr-
pica fazendo com que a fora para cima exercida pela radiao
seja igual ao peso da esfera. A esfera tem 2,00 mm de raio e uma
massa especfica de 19,0 g/cm 3 . (a) Qual deve ser a potncia da
fonte luminosa? (b) Mesmo que fosse possvel construir uma
fonte com essa potncia, por que o equilbrio da esfera seria ins- FIG. 33-42 Problemas 32, 33 e 36.
tvel?
33 Na Fig. 33-42 um feixe luminoso com uma intensidade de
I, 43 W/111 2 e a polarizao paralela ao eixo y, atravessa um sistema
cmi.posto por dois filtros polarizadores cujas direes fazem n-
gulos 81 = 70 e 82 = 90 com o eixo y. Qual a intensidade da luz
transmitida pelo sistema?
34 Na Fig. 33-43 um feixe de luz inicialmente no-polarizada
o atravessa trs filtros polarizadores cujas direes de polarizao
fazem ngulos de 81 = 82 = 03 = 50 com a direo do eixo y. Que
porcentagem da intensidade inicial da luz transmitida pelo con-
FIG. 33-40 Problema 30. junto? (Sugesto: Preste ateno nos ngulos.)
direes de polarizao so medidos no sentido anti-horrio no
sentido positivo do eixo y (no esto desenhados em escala). Os
ngulos e 1 e e3 so fixos, mas o ngulo e2 pode ser ajustado. A Fig.
33-46 mostra a intensidade da luz que atravessa o conjunto em
funo de e2 (A escala cio eixo de intensidades no conhecida.)
Que porcentagem da intensidade inicial da luz transmitida pelo
conjunto para e2 = 30 ?

1\
\

FIG. 33-43 Problemas 34 e 35. 82


\"'.' \
e 1,
35 Na Fig. 34-43. um feixe de luz inicialmente no-polarizada \'(! \

atravessa trs filtros polarizadores cujas direes de polarizao


fazem ngulos de e 1 = 40 , e2 = 20 e e,, = 40 com a direo do
eixo y. Que porcentagem da intensidade inicial da luz transmi-
tida pelo conjunto? (Sugesto: Preste ateno nos ngulos.)
FIG. 33.45 Problemas 40, 42 e 44 .
. . 36 Na Fig. 33-42 um feixe de luz no-polarizada atravessa
um conjunto de dois filtros polarizadores. Os ngulos e 1 e e2 das
direes de polarizao dos filtros so medidos no sentido anti- I
horrio a partir do semi-eixo y positivo (os ngulos no esto de-
senhados cm escala na figura). O ngulo e 1 fixo, mas o ngulo e2
pode ser ajustado. A Fig. 33-44 mostra a intensidade da luz que
atravessa o sistema em funo de e2 (A escala do eixo de intensi-
dades no conhecida.) Que porcentagem da intensidade inicial
da luz transmitida pelo conjunto para e2 = 90 ?

FIG. 33-46 Problema 40 .

. . 41 Um feixe de luz parcialmente polarizada pode ser consi-


derado uma mistura de luz polarizada e no-polarizada. Suponha
que um feixe desse tipo atravesse um filtro polarizador e que o
filtro seja girado de 360 enquanto se mantm perpendicular ao
feixe. Se a intensidade da luz transmitida varia por um fator de
FIG. 33-44 Problema 36.
5,0 durante a rotao do filtro, que frao da intensidade ela luz
incidente est associada luz polarizada do feixe?
. . 37 Um feixe de luz no-polarizada com uma intensidade de . . 42 Na Fig. 33-45 um feixe de luz no-polarizada atravessa
10 mW/m 2 atravessa um filtro polarizador como na Fig. 33-11. um conjunto de trs filtros polarizadores que transmite 0,0500 da
Determine (a) a amplitude do campo eltrico da luz transmitida; intensidade luminosa inicial. As direes de polarizao do pri-
(b) a presso exercida pela radiao sobre o filtro polarizador. meiro e do terceiro filtros so 81 = O e e3 = 90 . Determine (a)
. . 38 Na praia a luz em geral parcialmente polarizada de- o menor e (b) o maior valor possvel do ngulo e2 ( < 90 ) que
vido s reflexes na areia e na gua. Em uma certa praia, em define a direo de polarizao do filtro 2.
um certo dia, no final da tarde a componente horizontal do ve- 43 Queremos fazer a direo de polarizao de um feixe de
tor campo eltrico 2,3 vezes maior que a componente vertical. luz polarizada girar de 90 fazendo o feixe passar por um ou mais
Um banhista fica de p e coloca culos polarizadores que elimi- filtros polarizadores. (a) Qual o nmero mnimo de filtros ne-
nam totalmente a componente horizontal do campo eltrico. (a) cessrio? (b) Qual o nmero mnimo de filtros necessrio se a
Que frao da intensidade luminosa total chega aos olhos do ba- intensidade da luz transmitida deve ser mais ele 60% ela intensi-
nhista? (b) Ainda usando culos, o banhista se deita de lado na dade original?
areia. Que frao da intensidade luminosa total chega agora aos
olhos do banhista? . . 44 Na Fig. 33-45 um feixe de luz no-polarizada atravessa um
conjunto de trs filtros polarizadores. Os ngulos e 1, e2 e 83 das
. . 39 Um feixe de luz polarizada passa por um conjunto de direes de polarizao so medidos no sentido anti-horrio, a
dois filtros polarizadores. Em relao direo de polarizao ela partir do semi-eixo y positivo (os ngulos so esto desenhados
luz incidente as direes ele polarizao dos filtros so e para o em escala). Os ngulos (31 e e3 so fixos, mas o ngulo e2 pode ser
primeiro filtro e 90 para o segundo. Se 10% da intensidade inci- ajustado. A Fig. 33-47 mostra a intensidade da luz que atravessa o
dente so transmitidos pelo conjunto, quanto vale e? conjunto em funo ele e2 (A escala cio eixo de intensidades no
. . 40 Na Fig. 33-45 um feixe de luz no-polarizada passa por um conhecida.) Que porcentagem da intensidade inicial da luz
conjunto de trs filtros polarizadores. Os ngulos e i , f h e e3 das transmitida pelo conjunto para !32 = 90 ?
- Captulo 33 1 Ondas Eletromagnticas

I (n = 1,33) e (b) se o ndice ele refrao do material 2 maior ou


menor que o ndice ele refrao ela gua. Determine o ndice de
refrao (c) cio material 1 e (d) do material 2.

O '

60 120 180 2

FIG. 33-47 Problema 44.


gua

selro 338 Reflexo e Refrao


45 Um raio de luz que se propaga inicialmente no vcuo in-
cide na superfcie ele uma placa de vidro. No vcuo o raio faz um
ngulo de 32.0 com a normal superfcie, enquanto no vidro faz
um ngulo de 21,0 com a normal. Qual o ndice ele refrao do (a) (!,)
vidro?
FIG. 33-50 Problema 48.
46 Na Fig. 33-48a um raio luminoso que est se propagando
inicialmente na gua incide com um ngulo 8 1 em outro material,
no qual parte ela luz se refrata. O outro material pode ser do tipo 49 Quando o tanque retangular de metal ela Fig. 33-51 est
1 ou do tipo 2; a Fig. 33-48b mostra o ngulo de refrao 82 em cheio at a borda ele um lquido desconhecido um observador O,
funo do ngulo de incidncia 8 1 para os dois tipos de material. com os olhos ao nvel do alto cio tanque, mal pode ver o vrtice E.
A escala do eixo vertical definida por 82s = 90 . Sem fazer ne- A figura mostra um raio que se refrata na superfcie do lquido e
nhum clculo, determine (a) se o ndice de refrao do material toma a direo do observador O. Se D = 85,0 cm e L = 1,10 m,
I maior ou menor que o ndice de refrao da gua (n = 1,33) e qual o ndice ele refrao do lquido?
(b) se o ndice de refrao do material 2 maior ou menor que o
ndice de refrao da gua. Determine o ndice de refrao (c) do
: /Normal
material l e (d) cio material 2.

T
(" superfcie do lquido
o

l
!)

1 --L---IE FIG. 33-51 Problema 49.


IL.... L- --Le 1
O 45
90
. . 50 Na Fig. 33-52a um feixe luminoso que est se propagando
(a) (/,)
inicialmente no material 1 incide no material 2 com um ngulo
FIG. 33-48 Problema 46. ele 30 . A refrao da luz no material 2 depende, entre outros fa-
tores, cio ndice ele refrao n2 do material 2. A Fig. 33-52b mostra
o ngulo ele refrao 82 em funo de n2 . A escala do eixo vertical
47 A Fig. 33-49 mostra um raio luminoso sendo refletido em definida por 82a = 20,0 e e21, = 40,0 . (a) Qual o ndice de re-
dois espelhos perpendiculares A e B. Determine o ngulo entre o frao cio material 1? (b) Se o ngulo de incidncia aumenta para
raio incidente i e o raio r'. 60 e n 2 = 2,4, qual o valor ele 82 ?

FIG. 33-49 Problema 47.


e2 ' - - - - ' - - - - ' - - - - - ' - - - - 1 1 2
1,3 l,' 1,7 1,9
48 Na Fig. 33-50a um raio luminoso que est se propagando (a) (b)
inicialmente em um certo material incide com um ngulo &1 na
FIG. 33-52 Problema 50.
gua, onde parte da luz se refrata. O outro material pode ser cio
tipo 1 ou do tipo 2; a Fig. 33-50/J mostra o ngulo de refrao &2
em funo do ngulo ele incidncia 8 1 para os dois tipos ele ma- . . 51 Na Fig. 33-53 uma estaca vertical com 2,00 m de com-
terial. A escala cio eixo horizontal de fi nida por 8 1, = 90 . Sem primento se projeta cio fundo de uma piscina at um ponto 50,0
fazer nenhum clculo, determine (a) se o ndice de refrao do cm acima da gua. O Sol est 55,0 acima do horizonte. Qual o
material 1 maior ou menor que o ndice ele refrao da gua comprimento da sombra da estaca no fundo da piscina?
Problemas JB
afirmativa. determine o valor de n2 (c) Se 81 = 70 e n3 = 2,4, qual
o valor de 83 ?

2 3

FIG. 33-53 Problema 51 .

. . 52 Disperso em um vidro de janela. Na Fig. 33-54 um feixe


de luz branca incide com um ngulo e = 50 em um vidro comum
(a) (b)

de janela (mostrado de perfil). Para esse tipo de vidro o ndice FIG. 33-56 Problema 54.
de refrao da luz visvel varia de 1,524 na extremidade azul do
espectro a 1,509 na extremidade vermelha. As duas superfcies do
55 Na Fig. 33-57 um raio incide em uma das faces de um
vidro so paralelas. Determine a disperso angular das cores do
prisma triangular de vidro imerso no ar. O ngulo de incidncia
feixe (a) quando a luz entra no vidro e (b) quando a luz sai do
8 escolhido de tal forma que o raio emergente faz o mesmo n-
lado oposto. (Sugesto: Quando voc olha para um objeto atravs
gulo ecom a normal outra face. Mostre que o ndice de refrao
de um vidro de janela as cores do objeto se dispersam como na
n do vidro dado por
Fig. 33-20?)
sen ( i + </>)
n=
sent </>

onde cp o ngulo do vrtice superior do prisma e i o ngulo de


desvio, definido como o ngulo entre o raio emergente e o raio
incidente. (Nessas condies, o ngulo de desvio i tem o menor
valor possvel, que denominado ngulo de desvio mnimo.)
FIG. 33-54 Problema 52 .

. . 53 Na Fig. 33-55 a luz incide, fazendo um ngulo 81 = 40,1


com a normal, na interface de dois materiais transparentes. Parte
da luz atravessa as outras trs camadas transparentes e parte
refletida para cima e escapa para o ar. Se n 1 = 1,30, n2 = 1,40,
n3 = 1,32 e n4 = 1,45, determine o valor (a) de 85; (b) de 84.

Ar
FIG. 33-57 Problemas 55 e 66.

. . 56 Arco-ris produzidos por gotas quadradas. Suponha que,


em um planeta extico, as gotas de chuva tenham uma seo reta
quadrada e caiam sempre com uma face paralela ao solo. A Fig.
33-58 mostra uma dessas gotas, na qual incide um feixe de luz
branca com um ngulo de incidncia 8 = 70,0 no ponto P. A
parte da luz que penetra na gota se propaga at o ponto A, onde
JJarte tS rdrnlau.a ui:: vulla para u ar e a uulra parle relleliu.a. A
luz refletida chega ao ponto B, onde novamente parte da luz
refratada de volta para o ar e parte refletida. Qual a diferena
entre os ngulos dos raios de luz vermelha (n = 1,331) e de luz
azul (n = 1,343) que deixam a gota (a) no ponto A e (b) no ponto
FIG. 33-55 Problema 53.
B? (Essa diferena faz com que um observador externo veja um
arco-ris ao observar a luz que sai do ponto A ou do ponto B.)
54 Na Fig. 33-56a um feixe de luz que estava se propagando
no material 1 incide com um ngulo 8 1 = 40 na interface com o 1

l
1
material 2. Parte da luz penetra no material 2 e parte dessa luz
penetra no material 3; todas as interfaces so paralelas. A orien-
tao do feixe no material 3 depende em parte do ndice de refra-
o n3 do terceiro material. A Fig. 33-566 mostra o ngulo 83 em
funo de n3 .A escala do eixo vertical definida por ()3 = 30,0 e ' 11
831, = 50,0 . (a) possvel calcular o ndice de refrao do mate-
rial 1 com base nessas informaes? Se a resposta for afirmativa, 8
determine o valor de n 1. (b) possvel calcular o ndice de refra-
o do material 2 com base nessas informaes? Se a resposta for FIG. 33-58 Problema 56.
m!II Captulo 33 1 Ondas Eletromagnticas

seo 33-9 Reflexo Interna Total


57 Uma fonte luminosa pontual est 80,0 cm abaixo da super-
fcie de uma piscina. Calcule o dimetro do crculo na superfcie
atravs do qual a luz emerge da gua.
58 O ndice de refrao do benzeno 1,8. Qual o ngulo cr-
tico para um raio luminoso que se propaga no benzeno em dire-
o a uma interface plana do benzeno com o ar?
FIG. 33-61 Problema 62 .
. . 59 Na Fig. 33-59 um feixe luminoso que se propaga inicial-
mente no material 1 refratado para o material 2, atravessa esse
material e incide com o ngulo crtico na interface dos meios 2 e . . 63 A Fig. 33-62 mostra uma fibra tica simplificada: um n-
3. Os ndices de refrao so n 1 = 1,60, n 2 = 1,40 e n3 = 1,20. (a) cleo de plstico (n 1 = 1,58) envolvido por um revestimento de
Qual o valor do ngulo 8? (b) Se o valor de 8 aumenta, a luz plstico com um ndice de refrao menor (n 2 = 1,53). Um raio
consegue penetrar no meio 3? luminoso incide em uma das extremidades da fibra com um n-
gulo e. O raio deve sofrer reflexo interna total no ponto A , onde
atinge a interface ncleo-revestimento. (Isso necessrio para
que n.o haja perda de luz cada vez que o raio incide na interface.)
Qual o maior valor de e para o qual existe reflexo interna total
no ponto A?

FIG. 33-59 Problema 59.


FIG. 33-62 Problema 63.
ee60 Um peixe-gato est 2,00 m abaixo da superfcie de um
lago. (a) Qual o dimetro da circunferncia na superfcie que e064 Na Fig. 33-63 um raio luminoso incide com um ngulo (}1
delimita a regio na qual o peixe pode ver o que existe do lado de em uma face de um cubo de plstico transparente feito de um
fora do lago? (b) Se o peixe desce para uma profundidade maior, material cujo ndice de refrao 1,56. As dimenses indicadas
o dimetro ela circunferncia aumenta, diminui ou continua o na figura so H = 2,00 cm e W = 3,00 cm. A luz atravessa o cubo
mesmo?-z:$ e chega a uma das faces, onde sofre reflexo (no interior do cubo)
. . 61 No diagrama de raios da Fig. 33-60, onde os ngulos no e possivelmente reflexo (escapando para o ar). Este o ponto da
esto desenhados em escala, o raio incide com o ngulo crtico na primeira reflexo.A luz refletida volta a atravessar o cubo e chega
interface dos materiais 2 e 3. O ngulo <li 60,0 e dois dos ndices outra face, onde sofre uma segunda reflexo. Se 81 = 40 , deter-
de refrao so n 1 = 1,70 e n2 = 1,60. Determine (a) o ndice de mine em que face est (a) o ponto da primeira reflexo e (b) o
refrao n3 e (b) o valor do ngulo e. (c) Se o valor de e aumenta, ponto da segunda reflexo. Se existe refrao (c) no ponto da pri-
a luz consegue penetrar no meio 3? meira reflexo e/ou ( d) no ponto ela segunda reflexo, determine
o ngulo de refrao; se no existe, responda "no h refrao".
Se 81 = 70 , determine em que face est (e) o ponto da primeira
reflexo e (f) o ponto da segunda reflexo. Se existe refrao (g)
no ponto da primeira reflex.o e/ou (h) no ponto da segunda re-
flexo, determine o ngulo de refrao; se no existe, responda
"no h refrao".

-----w-----,

FIG. 33-60 Problema 61. T


H
2

3
. . 62 Na Fig. 33-61 a luz do raio A refratada pelo material I
(n 1 = 1,60), atravessa uma fina camada do material 2 (n 2 = 1,80)
e incide com o ngulo crtico na interface dos materiais 2 e 3 4
(n 3 = 1,30). (a) Qual o valor do ngulo de incidncia 8;1? (b) Se
eA diminui, parte ela luz consegue passar para o material 3? FIG. 33-63 Problema 64.
A luz do raio B refratada pelo material 1, atravessa o ma-
terial 2 e incide com o ngulo crtico na interface dos materiais 2
e 3. (c) Qual o valor do ngulo de incidncia eIJ? (b) Se e8 dimi- . . 65 Na Fig. 33-64 um raio luminoso incide perpendicular-
nui, parte da luz consegue passar para o material 3? mente face ab de um prisma de vidro (n = 1,5'2). Determine o
Problemas

maior valor do ngulo <>/: para o qual um raio totalmente refle- Problemas Adicionais
tido na face ac do prisma se este est imerso (a) no ar; (b) na gua. 71 Arco-ris. A Fig. 33-67 mostra um raio luminoso entrando e
saindo de uma gota d'gua esfrica depois de sofrer uma reflexo
a interna (veja a Fig. 33-2la). A diferena entre a direo final do
raio e a direo inicial o ngulo de desvio Bct cs\' (a) tvlostre que
8ctesv dado por

<Pf 8desv = 180 + 28; - 48,,

FIG. 33-64 Problema 65. onde 8; o ngulo de incidncia do raio na gota e e, o ngulo
l- do raio refratado. (b) Use a lei de Snell para expressar 8, em
e termos de 8; e do ndice de refrao n da gua. Em seguida, use
. . 66 Suponha que o ngulo do vrtice superior do prisma de
o uma calculadora grfica ou um computador para plotar 8ctcsv em
vidro da Fig. 33-57 seja<:/> = 60,0 e que o ndice de refrao do
l- funo de 8; para n = 1,331 (luz vermelha) e para n = 1,333 (luz
vidro seja n = 1,60. (a) Qual o menor ngulo de incidncia e
e azul).
para o qual um raio pode entrar na face esquerda do prisma e sair A curva para a luz vermelha e a curva para a luz azul passam
a na face direita? (b) Qual deve ser o ngulo de incidncia e para
por um mnimo para valores diferentes de Bct e"' o que significa
.) que o raio saia do prisma com o mesmo ngulo ecom que entrou,
11 que existe um ngulo de desvio mnimo diferente para cada cor.
como na Fig. 33-57?
A luz de uma dada cor que sai da gota com o ngulo de desvio
. . 67 Na Fig. 33-65 um raio luminoso penetra no ponto P, com mnimo especialmente intensa porque os raios se acumulam nas
um ngulo de incidncia e, em um prisma triangular cujo ngulo vizinhanas desse ngulo. Assim, a luz vermelha mais intensa sai
do vrtice superior 90 . Parte da luz refratada no ponto Q com da gota com um certo ngulo e a luz azul mais intensa sai da gota
um ngulo de refrao de 90 . (a) Qual o ndice de refrao do com outro ngulo.
prisma em termos de 8? (b) Qual, numericamente, o maior va- Determine o ngulo de desvio mnimo (c) para a luz verme-
lor possvel do ndice de refrao do prisma? A luz sai do prisma lha e (d) para a luz azul. (e) Se essas cores esto nas extremidades
no ponto Q quando o ngulo de incidncia nesse ponto (c) au- de um arco-ris (Fig. 33-21a), qual a largura angular do arco-
menta ligeiramente e (d) diminui ligeiramente? ris?

'' Ar V
'' Gota de chuva
81
m Raio
(2
as --- p ',,, incidente
)0
o) FIG. 33-65 Problema 67.
:la
ga
r- seo 33-1 O Polarizao por Reflexo
68 (a) Para que ngulo de incidncia a luz refletida na gua FIG. 33-67 Problema 71.
,o
n- totalmente polarizada? (b) Esse ngulo depende do compri-
ne mento de onda da luz?
)''. 72 O arco-ris primrio descrito no Problema 71 o tipo mais
69 Um raio de luz que est se propagando na gua (ndice de
lnl comum, produzido pela luz refletida apenas urna vez no interior
refrao 1,33) incide em uma placa de vidro cujo ndice de refra-
das gotas de chuva. Um tipo mais raro o arco-ris secundrio
:g) o 1,53. Para que ngulo de incidncia a luz refletida tot;cil-
re- descrito na Seo 33-8, produzido pela luz refletida duas vezes no
mente polarizada?
da interior das gotas (Fig. 33-68a). (a) Mostre que o desvio angular
. . 70 Na Fig. 33-66 um raio luminoso que estava se propagando sofrido por um raio luminoso ao atravessar uma gota de chuva
inicialmente no ar incide em um material 2 com um ndice de re- esfrica dado por
frao ni = 1,5. Abaixo do material 2 est o material 3, com um
ndice de refrao n3 . O raio incide na interface ar-material 2 com 8desv = (180 )k + 28; - 2(k + l)8r ,
o ngulo de Brewster para essa interface e incide na interface ma-
terial 2-material 3 com o ngulo de Brewster para essa interface. onde k o nmero de reflexes internas. Use o mtodo do Pro-
Qual o valor de n 3? blema 71 para determinar o ngulo de desvio mnimo (b) para
a luz vermelha e (c) para a luz azul de um arco-ris secund-
rio. (d) Determine a largura angular desse tipo de arco-ris (Fig..
33-21d).
Ar
O arco-ris tercirio estaria associado a trs reflexes inter-
nas (Fig. 33-68b ). provvel que esse tipo de arco-ris realmente
acontea, mas como foi comentado na Seo 33-8 no posshel
observ-lo porque muito fraco e ocorre na direo do Sol. De-
termine o ngulo de desvio mnimo (e) para a luz vermelha e (f)
lar- para a luz azul de um arco-ris tercirio. (g) Determine a largura
eo FIG. 33-66 Problema 70. angular desse tipo de arco-ris.
Captulo 33 1 Ondas Eletromagnticas

(a) (b)
l ,-1
FIG. 33-68 Problema 72. FIG. 33-71 Problema 75.

73 Na Fig. 33-69 um raio luminoso entra em uma placa de vidro


no ponto A, com um ngulo de incidncia 8 1 = 45,0 , e sofre refle- 76 Na Fig. 33-72 dois raios luminosos que estavam se propa-
xo interna total no ponto B. De acordo com essas informaes, gando inicialmente no ar passam por cinco placas de plstico
qual o valor mnimo do ndice de refrao do vidro? transparente c voltam para o ar. As placas tm interfaces para-
lelas e espessura desconhecida: os ndices de r e frao so n 1 =
1,7, n 2 = 1,6, n3 = 1,5, n4 = 1,4 e n5 = 1,6. O ngulo de incidncia
Raio do raio b fJ0 = 20 . Em relao normal ltima interface, de-
incidcnt.c termine (a) o ngulo de sada do raio a; (b) o ngulo de sada do
Ar raio b. (Sugestiio: Pode ser mais rpido resolver o problema alge-
bricamente.) Se em vez de ar houver um vidro com um ndice de
refrao 1,5 esquerda e direita das placas, determine o ngulo
de sada (c) do raio a; (d) do raio b.

FIG. 33-69 Problema 73.


a

7 4 Na Fig. 33-70 um feixe de luz no-polarizada, com uma in-


tensidade de 25 W/m 2, atravessa um sistema composto por quatro
filtros polarizadores cujos ngulos de polarizao so 8 1 = 40 , Ar
82 = 20 , fJ_, = 20 e 84 = 30 . Qual a intensidade da luz transmi-
tida pelo sistema')

L.
FIG. 33-72 Problema 76.

77 (a) Quanto tempo um sinal de rdio leva para percorrer os


150 km que separam uma antena transmissora de uma antena
receptora? (h) Vemos a Lua por causa da luz do Sol que reflete.
Quanto tempo essa luz leva para chegar a nossos olhos, desde
o instante em que deixa o Sol? As distncias entre a Terra e a
luz e entre a Terra e o Sol so, respectivamente, 3,8 X 10 5 km e
1,5 X 10 8 km. (c) Qual o tempo que a luz leva para executar uma
viagem ele ida e volta entre a Terra e uma espaonave que se en-
contra em rbita em torno de Saturno, a 1,3 X 109 km de distan-
cia? (d) Os astrnomos acreditam que a nebulosa do Caranguejo,
que est a cerca de 6500 anos-luz da Terra, o que restou de uma
supernova observada pelos chineses em 1054 d.C. Em que ano
ocorreu, na verdade, a exploso da supernova?
FIG. 33-70 Problema 74.
78 Por volta do ano 150 d.C. Cludio Ptolomeu mediu os se-
guintes valores para o ngulo de incidncia fi; e o ngulo de refra-
75 (a) Prove que um raio de luz que incide em uma janela de o 8,. de um raio luminoso ao passar do ar para a gua:
vidro emerge do lado oposto com a mesma direo que o raio
original e deslocado lateralmente, como na Fig. 33-71. (b) Mostre
que, para pequenos ngulos de incidncia, o deslocamento lateral e1 82 fi1 82
dado por
10 8 50 35
n-1
X= tfJ--- 20 15 30' 60 40 30'
11 '
30 22 30' 70 45 30'
onde t a espessura do vidro, fJ o ngulo de incidncia do raio 40 29 80 50
em radianos e n o ndice de refrao do vidro.
Problemas

Use os resultados da tabela e a lei de Snell para determinar o n- mdulo de 100 V/rn. Determine (a) o mdulo e (b) a direo do
dice de refrao da gua. O interesse desses dados est no fato de campo magntico correspondente.
serem as medidas cientficas mais antigas de que se tem notcia. 87 Determine (a) o limite superior e (b) o limite inferior do n-
79 A componente eltrica de um feixe de luz polarizada dada gulo de Brewster para uma luz branca incidindo em quartzo fun-
por dido. Suponha que os comprimentos de onda da luz estejam entre
400 e 700 nm.
E> = (S,00 V/m) sen[(l,00 X 10 6 m- 1)z + wt].
88 No sistema solar uma partcula est sujeita influncia com-
(a) Escreva uma expresso para a componente magntica da binada da atrao gravitacional do Sol e da fora da radiao so-
onda, incluindo o valor de w. Determine (b) o comprimento de lar. Suponha que a partcula uma esfera com uma massa espe-
onda; (e) o perodo e (d) a intensidade da luz. (e) O campo mag- cfica de 1,0 X 10 3 kg/m 3 e que toda a luz incidente absorvida.
ntico oscila paralelamente a que eixo? (f) Em que regio does- (a) Mostre que se o raio da partcula for menor que um certo raio
pectro eletromagntico est essa onda? crtico R a partcula ser ejetada para fora do sistema solar. (b)
Determine o valor do raio crtico.
80 A componente magntica de uma onda eletromagntica no
vcuo tem uma amplitude de 85,8 nT e um nmero de onda de 89 A componente magntica de uma onda luminosa polarizada
4,00111- 1. Determine (a) a freqncia, (b) o valor rms da compo- dada por
nente eltrica e (c) a intensidade da onda. B x = (4,0 X 10- 6 T) sen[(1, 57 X 107 rn 1)y + it].
81 Um laser de hlio-nenio, que trabalha com um compri-
mento de onda de 632,8 nm. tem uma potncia de 3,0 mW. O n- Determine (a) a direo de polarizao da luz; (b) a freqncia
gulo de divergncia do feixe e = 0,17 mrad (Fig. 33-73). (a) Qual da luz; (c) a intensidade da luz.
a intensidade do feixe a 40 m de distncia do laser? (b) Qual a 90 Um feixe de luz no-polarizada atravessa trs filtros polari-
potncia de uma fonte pontual que produz a mesma intensidade zadores. O ngulo entre as direes de polarizao do primeiro e
luminosa mesma distncia? do terceiro filtro 90 ; a direo de polarizao do filtro do meio
faz um ngulo de 45,0 com as direes de polarizao cios outros
dois filtros. Que frao da luz incidente atravessa os trs filtros?
l,aser
91 Um raio de luz branca que est< se propagando no quartzo
fundido incide em uma interface quartzo-ar com um ngulo 8 1
Suponha que o ndice de refrao do quartzo n = 1,456 na ex-
FIG. 33-73 Problema 81. tremidade vermelha da faixa da luz visvel e n = 1,470 na extre-
midade azul. Se 8 1 (a) 42,00 , (b) 43,10 e (c) 44,UU , a luz refra-
tada branca, avermelhada, azulada ou no h luz refratada?
82 A intensidade mdia da radiao solar que incide perpendi-
92 Na Fig. 33-74, um feixe de luz no-polarizada atravessa um
cularmente em urna superfcie situada logo acima da atmosfera
conjunto de trs filtros polarizadores no qual as direes de po-
da Terra 1,4 kW/n i . (a) Qual a presso de radiao p, exer-
larizao cio primeiro e cio terceiro filtro so 8 1 = 30 (no sentido
cida pelo Sol sobre essa superfcie, supondo que toda a radiao
anti-horrio) e 83 = 30 (no sentido horrio). Que frao ela luz
absorvida? (b) Calcule a razo entre essa presso e a presso
incidente transmitida pelo conjunto?
atmosfrica ao nvel do mar, que 1,0 x 105 Pa.
83 Durante um teste um radar da OTAN, operando em 12 GHz
com uma potncia de 180 kW, tenta detectar um avio "invisvel"
a 90 km de distncia. Suponha que as ondas de radar so emitidas X
uniformemente ao longo de um hemisfrio. (a) Qual a inten-
sidade do feixe ao chegar posio do avio? O avio relete as
ondas do radar como se tivesse uma seo reta de apenas U,22 m2
(b) Qual a potncia ela onda refletida pelo avio? Suponha que
a onda re fl etida tem uma intensidade uniforme ao longo de um
hemisfrio. Determine, na posio do radar, (e) a intensidade da
onda refletida; (d) o valor mximo do campo eltrico associado
onda refletida; (e) o valor rms do campo magntico associado
onda refletida.
84 Um feixe de luz no-polarizada atravessa um conjunto de FIG. 33-74 Problema 92.
quatro filtros polarizadores orientados de tal forma que o ngulo
entre as direes de polarizao ele filtros vizinhos 30 . Que fra- 93 Em uma regio do espao onde as foras gravitacionais po-
o ela luz incidente transmitida pelo conjunto? dem ser desprezadas uma esfera acelerada por um feixe lumi-
85 Um feixe de luz no-polarizada atravessa dois filtros polari- noso uniforme ele intensidade 6,0 mW/m2 . A esfera, totalmente ab-
zadores. Qual deve ser o ngulo entre as direes de polarizao sorvente, tem um raio de 2,0 .m e uma massa especfica uniforme
dos filtros para que a intensidade da luz que atravessa os dois fil- de 5,0 X 10 3 kg/m 3 . Determine o mdulo da acelerao da esfera.
tros seja um tero da intensidade da luz incidente? 94 Na Fig. 33-75 um feixe de luz no-polarizada atravessa um
86 Uma onda eletromagntica est se propagando no sentido conjunto de trs filtros polarizadores no qual as direes de po-
negativo do eixo y. Em um certo local e em um certo instante o larizao do primeiro e do segundo filtros so 8 1 = 20 e 02 = 40 .
campo eltrico aponta no sentido positivo do eixo z e tem um Que frao da luz incidente transmitida pelo conjunto?
mtl Captulo 33 1 Ondas Eletromagnticas

A
Raio

FIG. 33-77 Problema 98.

99 A componente magntica de uma onda polarizada dada


FIG. 33-75 Problema 94. por Bx = (4,00 ,T) sen[ky + (2,00 X 10 15 s- 1)t]. Determine (a) a
direo de propagao da onde; (b) a direo de polarizao da
luz; (c) a intensidade da onda. (d) Escreva uma expresso para o
95 Na Fig. 33-76 um feixe de luz no-polarizada atravessa um campo eltrico da onda, incluindo o valor do nmero de onda. (e)
conjunto de trs filtros polarizadores cujas direes de polariza- Determine o comprimento de onda. (f) Em que regio do espec-
o so 8 1 = 20 , 82 = 60 e 83 = 40 . Que frao da luz incidente tro eletromagntico est essa onda?
atravessa o conjunto? 100 Na Fig. 33-78, onde n 1 = 1,70, n2 = 1,50 e n3 = 1,30, a luz
refratada do material 1 para o material 2. Se a luz incide no ponto
A com o ngulo crtico da interface dos materiais 2 e 3, determine
(a) o ngulo de refrao no ponto B e (b) o ngulo inicial 8. Se,
em vez disso, a luz incide no ponto B com o ngulo crtico da in-
terface dos materiais 2 e 3, determine (c) o ngulo de refrao no
ponto A e (d) o ngulo inicial e. Se, em vez disso, a luz incide o
ponto A com o ngulo de Brewster para a interface entre os ma-
teriais 2 e 3, determine (e) o ngulo de refrao no ponto B e (f) o
ngulo inicial e.

FIG. 33-76 Problema 95.

96 Uma placa quadrada, perfeitamente refletora, situada no es-


pao sideral, est orientada perpendicularmente aos raios solares.
A placa tem 2,0 m de lado e se encontra a uma distncia de 3,0 FIG. 33-78 Problema 100.
X 10 11 m do Sol. Determine a fora exercida sobre a placa pelos
raios solares. 101 Quando uma luz vermelha que est se propagando no vcuo
97 O valor rms do campo eltrico de uma certa onda luminosa incide em uma certa placa de vidro com o ngulo de Brewster, o
0,200 Vim. Qual a amplitude do campo magntico associado? ngulo de refrao 32,0 . Determine (a) o ndice de refrao do
vidro e (b) o ngulo de Brewster.
98 Na Fig. 33-77 um albatroz est planando horizontalmente
com uma velocidade constante de 15 mls acima de um terreno 102 Mostre, a partir das Eqs. 33-11 e 33-17, que E(x, t) e B(x,
plano, movendo-se em um plano vertical que contm o Sol. A r), o campo eltrico e o campo magntico associados a uma onda
ave se aproxima de uma parede de altura h = 2,0 m e se encontra eletromagntica, devem satisfazer as "equaes de onda"
mesma altura do solo que a extremidade superior da parede. -;PE
-= c2 - a E-
2
a2B c " -ci-B
2

Nessa hora do dia o ngulo do Sol em relao ao solo e = 30 . e -- =


at 2 ax 2 at2 ax 2
Com que velocidade a sombra do albatroz se move (a) horizon-
talmente, ao longo do solo; (b) verticalmente, ao longo da pa- 103 (a) Mostre que as Eqs. 33-1 e 33-2 satisfazem as equaes
rede? Mais tarde, um gavio percorre o mesmo caminho, com a de onda do Problema 102. (b) Mostre que expresses da forma
mesma velocidade. Voc observa que no momento em que a som- E = E m f(kx :+:: wt) e B = B,,, f(kx :+:: wt), onde f(kx :+:: wt) uma
bra do gavio atinge a parede a velocidade da sombra aumenta funo qualquer, tambm satisfazem as equaes de onda.
consideravelmente. (c) Nesse momento o Sol est mais alto ou 104 Uma fonte luminosa pontual emite isotropicamente com
mais baixo no cu que durante o vo do albatroz? (d) Se a velo- uma potncia de 200 W. Qual a fora que essa luz exerce sobre
cidade da sombra do gavio na parede 45 m/s, qual o ngulo 8 uma esfera totalmente absorvente, com 2,0 cm de raio, situada a
do Sol nesse momento? 20 m de distncia da fonte?
1. (a) From Fig. 33-2 we find the smaller wavelength in question to be about 515 nm.

(b) Similarly, the larger wavelength is approximately 610 nm.

(c) From Fig. 33-2 the wavelength at which the eye is most sensitive is about 555 nm.

(d) Using the result in (c), we have

c 3.00 108 m/s


f = = = 5.41 1014 Hz .
555 nm

(e) The period is T = 1/f = (5.41 1014 Hz)1 = 1.85 1015 s.


2. In air, light travels at roughly c = 3.0 108 m/s. Therefore, for t = 1.0 ns, we have a
distance of
d = ct = (3.0 108 m / s) (1.0 10 9 s) = 0.30 m.
3. Since << , we find f is equal to

F c I c = (3.0 10 m / s)(0.0100 10
G J
8 9
m)
H K 2 9
(632.8 10 m) 2
= 7.49 109 Hz.
4. (a) The frequency of the radiation is

c 3.0 108 m / s
f = = = 4.7 103 Hz.
(10
. 10 )(6.4 10 m)
5 6

(b) The period of the radiation is

1 1
T= = = 212 s = 3 min 32 s.
f 4.7 103 Hz
5. If f is the frequency and is the wavelength of an electromagnetic wave, then f = c.
The frequency is the same as the frequency of oscillation of the current in the LC circuit
of the generator. That is, f = 1 / 2 LC , where C is the capacitance and L is the
inductance. Thus

= c.
2 LC
The solution for L is

2
L= 2 2 =
c
550 109 m h 2

= 5.00 1021 H.
4 Cc c hc
4 2 17 1012 F 2.998 108 m / s h 2

This is exceedingly small.


6. The emitted wavelength is

= 2c LC = 2 ( 2.998 108 m/s ) ( 0.25310 H )( 25.0 1012 F ) = 4.74m.


c 6
=
f
7. If P is the power and t is the time interval of one pulse, then the energy in a pulse is

c hc h
. 109 s = 10
E = Pt = 100 1012 W 10 . 105 J.
8. The amplitude of the magnetic field in the wave is

Em 3.20 104 V / m
Bm = = . 10 12 T.
= 107
c 2.998 10 m / s
8
9. (a) The amplitude of the magnetic field is

Em 2.0V/m
Bm = = = 6.67 109 T 6.7 109 T.
c 2.998 10 m/s
8

G
(b) Since the E -wave oscillates in the z direction and travels in the x direction, we have Bx
= Bz = 0. So, the oscillation of the magnetic field is parallel to the y axis.
G G
(c) The direction (+x) of the electromagnetic wave propagation is determined by E B . If
the electric field points in +z, then the magnetic field must point in the y direction.

With SI units understood, we may write

x 2.0 cos 10 ( t x / c )
15
15
By = Bm cos 10 t =
c 3.0 108
x
= ( 6.7 109 ) cos 1015 t
c
10. (a) The amplitude of the magnetic field in the wave is

Em 5.00 V / m
Bm = = . 108 T.
= 167
c 2.998 108 m / s

(b) The intensity is the average of the Poynting vector:

I = Savg
E2
= m =
b
5.00 V / m g 2

= 3.31 102 W / m2 .
c hc
2 0c 2 4 10 T m / A 2.998 10 m / s
7 8
h
11. The intensity is the average of the Poynting vector:

I = Savg =
cBm2
=
c hc . 104 T
3.0 108 m / s 10 h 2

= 12
. 106 W / m2 .
2 0 c . 106 H / m
2 126 h 2
12. The intensity of the signal at Proxima Centauri is

P . 106 W
10
I= = = 4.8 1029 W / m2 .
b gc
4 r 2 4 4.3 ly 9.46 1015 m / ly h 2
13. (a) The magnetic field amplitude of the wave is

Em 2.0 V / m
Bm = = = 6.7 109 T.
c 2.998 108 m / s
(b) The intensity is

E2
I= m =
b
2.0 V / m g 2

= 5.3 103 W / m2 .
c hc
2 0c 2 4 10 T m / A 2.998 10 m / s
7 8
h
(c) The power of the source is

P = 4r 2 I avg = 4 (10 m ) ( 5.3 103 W/m 2 ) = 6.7 W.


2
14. (a) The power received is

(300 m )2 / 4
Pr = (1.0 10 12
W) = 1.4 1022 W.
4 ( 6.37 10 m )
6 2

(b) The power of the source would be


LM 10. 10 W OP 12

c hc
P = 4 r 2 I = 4 2.2 104 ly 9.46 1015 m / ly h M 4 6.37 10 m P = 11. 10
2
15
W.
N c hQ 6 2
15. (a) We use I = Em2 /20c to calculate Em:

c hc
Em = 2 0 I c = 2 4 107 T m / A 140 hc h
. 103 W / m2 2.998 108 m / s
= 103
. 103 V / m.

(b) The magnetic field amplitude is therefore

Em 103. 104 V / m
Bm = = = 3.43 106 T.
c 2.998 10 m / s
8
16. (a) The expression Ey = Em sin(kx t) it fits the requirement at point P [it] is
decreasing with time if we imagine P is just to the right (x > 0) of the coordinate origin
(but at a value of x less than /2k = /4 which is where there would be a maximum, at t =
0). It is important to bear in mind, in this description, that the wave is moving to the right.
Specifically, xP = (1/ k ) sin 1 (1/ 4) so that Ey = (1/4) Em at t = 0, there. Also, Ey = 0
with our choice of expression for Ey . Therefore, part (a) is answered simply by solving
for xP. Since k = 2f/c we find
c 1
xP = sin 1 = 30.1 nm .
2 f 4

(b) If we proceed to the right on the x axis (still studying this snapshot of the wave at t
= 0) we find another point where Ey = 0 at a distance of one-half wavelength from the
1 1
previous point where Ey = 0. Thus (since = c/f ) the next point is at x = 2 = 2 c/f and is
consequently a distance c/2f xP = 345 nm to the right of P.
17. (a) The average rate of energy flow per unit area, or intensity, is related to the electric
field amplitude Em by I = Em2 / 2 0c , so

c hc hc
Em = 2 0cI = 2 4 107 H / m 2.998 108 m / s 10 106 W / m2 h
= 8.7 102 V / m.

(b) The amplitude of the magnetic field is given by

Em 8.7 102 V / m
Bm = = = 2.9 1010 T.
c 2.998 10 m / s
8

(c) At a distance r from the transmitter, the intensity is I = P / 2r 2 , where P is the power
of the transmitter over the hemisphere having a surface area 2 r 2 . Thus

P = 2r 2 I = 2 (10103 m ) (10 10 W/m 2 ) = 6.3103 W.


2 6
18. From the equation immediately preceding Eq. 33-12, we see that the maximum value
of B/t is Bm . We can relate Bm to the intensity:

Em 2c 0 I
Bm = = ,
c c

and relate the intensity to the power P (and distance r) using Eq. 33-27. Finally, we
relate to wavelength using = kc = 2c/. Putting all this together, we obtain

B 2 0 P 2 c
= = 3.44 106 T/s .
t max 4 c r
19. Since the surface is perfectly absorbing, the radiation pressure is given by pr = I/c,
where I is the intensity. Since the bulb radiates uniformly in all directions, the intensity a
distance r from it is given by I = P/4r2, where P is the power of the bulb. Thus

P 500 W
pr = = = 5.9 108 Pa.
b gc
4 r c 4 1.5 m 2.998 108 m / s
2 2
h
20. The radiation pressure is

I 10 W / m2
pr = = = 3.3 108 Pa.
c 2.998 10 m / s
8
21. The plasma completely reflects all the energy incident on it, so the radiation pressure
is given by pr = 2I/c, where I is the intensity. The intensity is I = P/A, where P is the
power and A is the area intercepted by the radiation. Thus

2P 2 (1.5 109 W )
pr = = = 1.0 107 Pa.
Ac (1.00 106 m 2 ) ( 2.998 108 m/s )
22. (a) The radiation pressure produces a force equal to

(1.4103 W/m 2 ) ( 6.37 106 m )


2
I
Fr = pr ( R ) = ( Re ) =
2 2
= 6.0 108 N.
2.998 10 m/s
e
c
8

(b) The gravitational pull of the Sun on Earth is

GM s M e ( 6.67 10 N m 2 / kg 2 ) ( 2.0 1030 kg ) ( 5.98 1024 kg )


11

Fgrav = =
(1.5 10 m )
2
d es2 11

= 3.6 1022 N,

which is much greater than Fr.


23. Let f be the fraction of the incident beam intensity that is reflected. The fraction
absorbed is 1 f. The reflected portion exerts a radiation pressure of

2 f I0
pr =
c

and the absorbed portion exerts a radiation pressure of

(1 f ) I 0
pa = ,
c

where I0 is the incident intensity. The factor 2 enters the first expression because the
momentum of the reflected portion is reversed. The total radiation pressure is the sum of
the two contributions:
2 f I 0 + (1 f ) I 0 (1 + f ) I 0
ptotal = pr + pa = = .
c c

To relate the intensity and energy density, we consider a tube with length A and cross-
sectional area A, lying with its axis along the propagation direction of an electromagnetic
wave. The electromagnetic energy inside is U = uAA, where u is the energy density. All
this energy passes through the end in time t = A / c, so the intensity is

U uAAc
I= = = uc.
At AA

Thus u = I/c. The intensity and energy density are positive, regardless of the propagation
direction. For the partially reflected and partially absorbed wave, the intensity just outside
the surface is
I = I0 + f I0 = (1 + f )I0,

where the first term is associated with the incident beam and the second is associated with
the reflected beam. Consequently, the energy density is

I (1 + f ) I 0
u= = ,
c c
the same as radiation pressure.
24. (a) We note that the cross section area of the beam is d 2/4, where d is the diameter
of the spot (d = 2.00). The beam intensity is

P 5.00 103 W
I= = = 3.97 109 W / m2 .
d 2 / 4 b gc 9
2.00 633 10 m h 2
/4

(b) The radiation pressure is

I 3.97 109 W / m2
pr = = = 13.2 Pa.
c 2.998 108 m / s

(c) In computing the corresponding force, we can use the power and intensity to eliminate
the area (mentioned in part (a)). We obtain

F d IJ p = FG P IJ p = c5.00 10 Whb13.2 Pag = 167


F =G
2 3
11
r
H 4 K HIK r
3.97 10 W / m
r . 10
9 2
N.

(d) The acceleration of the sphere is

Fr Fr . 1011 N)
6(167
a= = =
m ( d 3 / 6) (5.00 10 3 kg / m3 )[(2.00)(633 109 m)]3
= 314
. 103 m / s2 .
25. (a) Since c = f , where is the wavelength and f is the frequency of the wave,

c 2.998 108 m / s
f = = = 10
. 108 Hz.
3.0 m

(b) The angular frequency is

= 2 f = 2 (1.0 108 Hz) = 6.3 108 rad / s.

(c) The angular wave number is

2 2
k= = = 2.1 rad / m.
3.0 m

(d) The magnetic field amplitude is

Em 300V/m
Bm = = = 1.0 106 T.
c 2.998 10 m/s
8

G G
(e)
G GB must be in the positive z direction when E is in the positive y direction in order for
E B to be in the positive x direction (the direction of propagation).

(f) The intensity of the wave is

Em2 (300V/m) 2
I= = = 119W/m 2 1.2 102 W/m 2 .
2 0 c 2(4 10 H/m)(2.998 10 m/s)
7 8

(g) Since the sheet is perfectly absorbing, the rate per unit area with which momentum is
delivered to it is I/c, so

dp IA (119 W / m2 )(2.0 m2 )
= = = 8.0 107 N.
dt c 2.998 108 m / s

(h) The radiation pressure is

dp / dt 8.0 107 N
pr = = 2
= 4.0 107 Pa.
A 2.0 m
26. We require Fgrav = Fr or
mM s 2 IA
G = ,
d es2 c
and solve for the area A:

cGmM s (6.67 1011 N m2 / kg 2 )(1500 kg)(1.99 1030 kg)(2.998 108 m / s)


A= =
2 Id es2 . 103 W / m2 )(150
2(140 . 1011 m) 2
= 9.5 105 m2 = 0.95 km2 .
27. If the beam carries energy U away from the spaceship, then it also carries momentum
p = U/c away. Since the total momentum of the spaceship and light is conserved, this is
the magnitude of the momentum acquired by the spaceship. If P is the power of the laser,
then the energy carried away in time t is U = Pt. We note that there are 86400 seconds in
a day. Thus, p = Pt/c and, if m is mass of the spaceship, its speed is

p Pt (10 103 W)(86400 s)


v= = = . 103 m / s.
= 19
. 10 kg)(2.998 10 m / s)
m mc (15 3 8
28. The mass of the cylinder is m = ( D 2 / 4) H , where D is the diameter of the cylinder.
Since it is in equilibrium

HD 2 g D 2 2 I
Fnet = mg Fr = = 0.
4 4 c
We solve for H:

2I 2P 1
H= =
gc D 2 / 4 gc
2(4.60W)
= 3
[(2.6010 m) / 4](9.8m/s 2 )(3.0 108 m/s)(1.20 103 kg/m3 )
2

= 4.91107 m.
29. (a) The upward force supplied by radiation pressure in this case (Eq. 33-32) must be
equal to the magnitude of the pull of gravity (mg). For a sphere, the projected area
(which is a factor in Eq. 33-32) is that of a circle A = r2 (not the entire surface area of
the sphere) and the volume (needed because the mass is given by the density multiplied
by the volume: m = V) is V = 4 r 3 / 3 . Finally, the intensity is related to the power P of
the light source and another area factor 4R2, given by Eq. 33-27. In this way, with
= 1.9 104 kg/m3 , equating the forces leads to

4 r 3 g 1
P = 4 R c
2
2 = 4.68 10 W .
11

3 r

(b) Any chance disturbance could move the sphere from being directly above the source,
and then the two force vectors would no longer be along the same axis.
30. Eq. 33-27 suggests that the slope in an intensity versus inverse-square-distance graph
(I plotted versus r 2 ) is P/4. We estimate the slope to be about 20 (in SI units) which
means the power is P = 4(30) 2.5 102 W.
31. We shall assume that the Sun is far enough from the particle to act as an isotropic
point source of light.
G
(a) The forces that act on the dust particle are the radially outward radiation force Fr and
G
the radially inward (toward the Sun) gravitational force Fg . Using Eqs. 33-32 and 33-27,
the radiation force can be written as

IA P R 2 PS R 2
Fr = = S2 = 2 ,
c 4 r c 4r c

where R is the radius of the particle, and A = R 2 is the cross-sectional area. On the other
hand, the gravitational force on the particle is given by Newtons law of gravitation (Eq.
13-1):
GM S m GM S (4 R 3 / 3) 4 GM S R 3
Fg = = = ,
r2 r2 3r 2

where m = (4 R 3 / 3) is the mass of the particle. When the two forces balance, the
particle travels in a straight path. The condition that Fr = Fg implies

PS R 2 4 GM S R 3
= ,
4r 2 c 3r 2
which can be solved to give

3PS 3(3.9 1026 W)


R= =
16 c GM S 16 (3 108 m/s)(3.5 103 kg/m 3 )(6.67 10 11 m 3 /kg s 2 )(1.99 1030 kg)
= 1.7 107 m .

(b) Since Fg varies with R 3 and Fr varies with R 2 , if the radius R is larger, then Fg > Fr ,
and the path will be curved toward the Sun (like path 3).
32. In this case, we replace I0 cos2 70 by 1
2 I 0 as the intensity of the light after passing
through the first polarizer. Therefore,

1 1
If = I 0 cos2 (9070 ) = (43 W / m2 )(cos2 20 ) = 19 W / m2 .
2 2
33. The angle between the direction of polarization of the light incident on the first
polarizing sheet and the polarizing direction of that sheet is 1 = 70. If I0 is the intensity
of the incident light, then the intensity of the light transmitted through the first sheet is

I1 = I 0 cos2 1 = (43 W / m2 ) cos2 70 = 5.03 W / m2 .

The direction of polarization of the transmitted light makes an angle of 70 with the
vertical and an angle of 2 = 20 with the horizontal. 2 is the angle it makes with the
polarizing direction of the second polarizing sheet. Consequently, the transmitted
intensity is
I 2 = I1 cos2 2 = (5.03 W / m2 ) cos2 20 = 4.4 W / m2 .
34. After passing through the first polarizer the initial intensity I0 reduces by a factor of
1/2. After passing through the second one it is further reduced by a factor of cos2 (
1 2) = cos2 (1 + 2). Finally, after passing through the third one it is again reduced by
a factor of cos2 ( 2 3) = cos2 (2 + 3). Therefore,

If 1 1
= cos 2 (1 + 2 )cos 2 ( 2 + 3 ) = cos 2 (50 + 50)cos 2 (50 + 50)
I0 2 2
= 4.5 104.

Thus, 0.045% of the lights initial intensity is transmitted.


35. Let I0 be the intensity of the unpolarized light that is incident on the first polarizing
sheet. The transmitted intensity is I1 = 21 I 0 , and the direction of polarization of the
transmitted light is 1 = 40 counterclockwise from the y axis in the diagram. The
polarizing direction of the second sheet is 2 = 20 clockwise from the y axis, so the angle
between the direction of polarization that is incident on that sheet and the polarizing
direction of the sheet is 40 + 20 = 60. The transmitted intensity is

1
I 2 = I1 cos2 60 = I 0 cos2 60 ,
2

and the direction of polarization of the transmitted light is 20 clockwise from the y axis.
The polarizing direction of the third sheet is 3 = 40 counterclockwise from the y axis.
Consequently, the angle between the direction of polarization of the light incident on that
sheet and the polarizing direction of the sheet is 20 + 40 = 60. The transmitted
intensity is
1
. 10 2 .
I 3 = I 2 cos2 60 = I 0 cos4 60 = 31
2

Thus, 3.1% of the lights initial intensity is transmitted.


36. We examine the point where the graph reaches zero: 2 = 160. Since the polarizers
must be crossed for the intensity to vanish, then 1 = 160 90 = 70. Now we
consider the case 2 = 90 (which is hard to judge from the graph). Since 1 is still equal
to 70, then the angle between the polarizers is now =20. Accounting for the
automatic reduction (by a factor of one-half) whenever unpolarized light passes
through any polarizing sheet, then our result is

2 cos ()
1 2
= 0.442 44%.
37. (a) Since the incident light is unpolarized, half the intensity is transmitted and half is
absorbed. Thus the transmitted intensity is I = 5.0 mW/m2. The intensity and the electric
field amplitude are related by I = Em2 / 2 0c, so

Em = 2 0cI = 2(4 10 7 H / m)(3.00 108 m / s)(5.0 103 W / m2 )


= 19
. V / m.

(b) The radiation pressure is pr = Ia/c, where Ia is the absorbed intensity. Thus

5.0 103 W / m2
pr = . 1011 Pa.
= 17
3.00 10 m / s
8
38. (a) The fraction of light which is transmitted by the glasses is

If E 2f Ev2 Ev2
= = = = 016
. .
I0 E02 Ev2 + Eh2 Ev2 + (2.3Ev ) 2
G
(b) Since now the horizontal component of E will pass through the glasses,

If Eh2 (2.3Ev ) 2
= = = 0.84.
I 0 Ev2 + Eh2 Ev2 + (2.3Ev ) 2
39. As the polarized beam of intensity I0 passes the first polarizer, its intensity is reduced
to I 0 cos 2 . After passing through the second polarizer which makes a 90 angle with the
first filter, the intensity is
I = ( I 0 cos 2 ) sin 2 = I 0 /10

which implies sin2 cos2 = 1/10, or sin cos = sin2 /2 =1/ 10 . This leads to = 70
or 20.
40. We note the points at which the curve is zero (2 = 0 and 90) in Fig. 33-45(b). We
infer that sheet 2 is perpendicular to one of the other sheets at 2 = 0, and that it is
perpendicular to the other of the other sheets when 2 = 90. Without loss of generality,
we choose 1 = 0, 3 = 90. Now, when 2 = 30, it will be = 30 relative to sheet 1
and = 60 relative to sheet 3. Therefore,

If 1
= cos 2 ( ) cos 2 ( ) = 9.4% .
Ii 2
41. Let I0 be the intensity of the incident beam and f be the fraction that is polarized. Thus,
the intensity of the polarized portion is f I0. After transmission, this portion contributes
f I0 cos2 to the intensity of the transmitted beam. Here is the angle between the
direction of polarization of the radiation and the polarizing direction of the filter. The
intensity of the unpolarized portion of the incident beam is (1 f )I0 and after transmission,
this portion contributes (1 f )I0/2 to the transmitted intensity. Consequently, the
transmitted intensity is
1
I = f I 0 cos 2 + (1 f ) I 0 .
2

As the filter is rotated, cos2 varies from a minimum of 0 to a maximum of 1, so the


transmitted intensity varies from a minimum of

1
I min = (1 f ) I 0
2
to a maximum of
1 1
I max = f I 0 + (1 f ) I 0 = (1 + f ) I 0 .
2 2

The ratio of Imax to Imin is


I max 1 + f
= .
I min 1 f

Setting the ratio equal to 5.0 and solving for f, we get f = 0.67.
42. We apply Eq. 33-40 (once) and Eq. 33-42 (twice) to obtain

1
I= I 0 cos 2 2 cos 2 (90 2 ) .
2

I 1 2
Using trig identities, we rewrite this as = sin (2 2 ) .
I0 8

(a) Therefore we find 2 = 2 sin1 0.40 = 19.6.


1

(b) Since the first expression we wrote is symmetric under the exchange: 2 90 2,
then we see that the angle's complement, 70.4, is also a solution.
43. (a) The rotation cannot be done with a single sheet. If a sheet is placed with its
polarizing direction at an angle of 90 to the direction of polarization of the incident
radiation, no radiation is transmitted. It can be done with two sheets. We place the first
sheet with its polarizing direction at some angle , between 0 and 90, to the direction of
polarization of the incident radiation. Place the second sheet with its polarizing direction
at 90 to the polarization direction of the incident radiation. The transmitted radiation is
then polarized at 90 to the incident polarization direction. The intensity is

I = I 0 cos 2 cos 2 (90 ) = I 0 cos 2 sin 2 ,

where I 0 is the incident radiation. If is not 0 or 90, the transmitted intensity is not zero.

(b) Consider n sheets, with the polarizing direction of the first sheet making an angle of
= 90/n relative to the direction of polarization of the incident radiation. The polarizing
direction of each successive sheet is rotated 90/n in the same sense from the polarizing
direction of the previous sheet. The transmitted radiation is polarized, with its direction of
polarization making an angle of 90 with the direction of polarization of the incident
radiation. The intensity is
I = I 0 cos 2 n (90 / n) .

We want the smallest integer value of n for which this is greater than 0.60I0. We start
with n = 2 and calculate cos 2 n (90 / n) . If the result is greater than 0.60, we have obtained
the solution. If it is less, increase n by 1 and try again. We repeat this process, increasing
n by 1 each time, until we have a value for which cos 2 n (90 / n) is greater than 0.60. The
first one will be n = 5.
44. We note the points at which the curve is zero (2 = 60 and 140) in Fig. 33-45(b).
We infer that sheet 2 is perpendicular to one of the other sheets at 2 = 60, and that it is
perpendicular to the other of the other sheets when 2 = 140. Without loss of generality,
we choose 1 = 150, 3 = 50. Now, when 2 = 90, it will be | | = 60 relative to
sheet 1 and | | = 40 relative to sheet 3. Therefore,

If 1
= cos 2 ( ) cos 2 ( ) = 7.3% .
Ii 2
45. The law of refraction states

n1 sin 1 = n2 sin 2 .

We take medium 1 to be the vacuum, with n1 = 1 and 1 = 32.0. Medium 2 is the glass,
with 2 = 21.0. We solve for n2:

sin 1 FG
sin 32.0 IJ
n2 = n1
sin 2
= (100
. )
H .
sin 210
= 148
K
. .
46. (a) For the angles of incidence and refraction to be equal, the graph in Fig. 33-48(b)
would consist of a y = x line at 45 in the plot. Instead, the curve for material 1 falls
under such a y = x line, which tells us that all refraction angles are less than incident
ones. With 2 < 1 Snells law implies n2 > n1 .

(b) Using the same argument as in (a), the value of n2 for material 2 is also greater than that
of water (n1).

(c) Its easiest to examine the right end-point of each curve. With 1 = 90 and 2 =
(90), and with n1 = 1.33 (Table 33-1) we find, from Snells law, n2 = 1.4 for material 1.

(d) Similarly, with 1 = 90 and 2 = (90), we obtain n2 = 1.9.


47. The angle of incidence for the light ray on mirror B is 90 . So the outgoing ray r'
makes an angle 90 (90 ) = with the vertical direction, and is antiparallel to the
incoming one. The angle between i and r' is therefore 180.
48. (a) For the angles of incidence and refraction to be equal, the graph in Fig. 33-50(b)
would consist of a y = x line at 45 in the plot. Instead, the curve for material 1 falls
under such a y = x line, which tells us that all refraction angles are less than incident
ones. With 2 < 1 Snells law implies n2 > n1 .

(b) Using the same argument as in (a), the value of n2 for material 2 is also greater than that
of water (n1).

(c) Its easiest to examine the topmost point of each curve. With 2 = 90 and 1 = (90),
and with n2 = 1.33 (Table 33-1) we find n1 = 1.9 from Snells law.

(d) Similarly, with 2 = 90 and 1 = (90), we obtain n1 = 1.4.


49. Note that the normal to the refracting surface is vertical in the diagram. The angle of
refraction is 2 = 90 and the angle of incidence is given by tan 1 = L/D, where D is the
height of the tank and L is its width. Thus

L 1 1.10 m
1 = tan 1 = tan = 52.31.
D 0.850 m

The law of refraction yields

n1 = n2
sin 2
= (100
FG IJ
sin 90
= 126
sin 1
. )
H K
sin 52.31
. ,

where the index of refraction of air was taken to be unity.


50. (a) A simple implication of Snells law is that 2 = 1 when n1 = n2. Since the angle of
incidence is shown in Fig. 33-52(a) to be 30, then we look for a point in Fig. 33-52(b)
where 2 = 30. This seems to occur when n2 = 1.7. By inference, then, n1 = 1.7.

(b) From 1.7sin(60) = 2.4sin(2) we get 2 = 38.


51. Consider a ray that grazes the top of the pole, as shown in the diagram that follows.
Here 1 = 90 = 35, A1 = 0.50 m, and A 2 = 150
. m. The length of the shadow is x + L.
x is given by

x = A1 tan 1 = (0.50 m) tan 35 = 0.35 m.

According to the law of refraction, n2 sin 2 = n1 sin 1. We take n1 = 1 and n2 = 1.33


(from Table 33-1). Then,

2 = sin 1
FG sin IJ = sin FG sin 35.0 IJ = 2555
1

H n K H 133 K . .
1

2 .
L is given by

L = A 2 tan 2 = (150
. m) tan 25.55 = 0.72 m.

The length of the shadow is 0.35 m + 0.72 m = 1.07 m.


52. (a) Snells law gives nair sin(50) = n2b sin 2b and nair sin(50) = n2r sin 2r where we
use subscripts b and r for the blue and red light rays. Using the common approximation
for airs index (nair = 1.0) we find the two angles of refraction to be 30.176 and 30.507.
Therefore, = 0.33.

(b) Both of the refracted rays emerges from the other side with the same angle (50) with
which they were incident on the first side (generally speaking, light comes into a block at
the same angle that it emerges with from the opposite parallel side). There is thus no
difference (the difference is 0) and thus there is no dispersion in this case.
53. (a) Approximating n = 1 for air, we have

n1 sin 1 = (1) sin 5 56.9 = 5

and with the more accurate value for nair in Table 33-1, we obtain 56.8.

(b) Eq. 33-44 leads to

n1 sin 1 = n2 sin 2 = n3 sin 3 = n4 sin 4


so that
n1
4 = sin 1 sin 1 = 35.3.
n4
54. (a) From n1sin1 = n2sin2 and n2sin2 = n3sin3, we find n1sin1 = n3sin3. This has
a simple implication: that 1 =3 when n1 = n3. Since we are given 1 = 40 in Fig. 33-
56(a) then we look for a point in Fig. 33-56(b) where 3 = 40. This seems to occur at n3
= 1.6, so we infer that n1 = 1.6.

(b) Our first step in our solution to part (a) shows that information concerning n2
disappears (cancels) in the manipulation. Thus, we cannot tell; we need more
information.

(c) From 1.6sin70 = 2.4sin3 we obtain 3 = 39.


55. We label the light rays point of entry A, the vertex of the prism B, and the light rays
exit point C. Also, the point in Fig. 33-57 where is defined (at the point of intersection
of the extrapolations of the incident and emergent rays) is denoted D. The angle indicated
by ADC is the supplement of , so we denote it s = 180 . The angle of refraction in
the glass is 2 = n1 sin . The angles between the interior ray and the nearby surfaces is the
complement of 2, so we denote it 2c = 90 2. Now, the angles in the triangle ABC
must add to 180:

180 = 2 2 c + 2 = .
2

Also, the angles in the triangle ADC must add to 180:

1
180 = 2 ( 2 ) + s = 90 + 2 s
2

which simplifies to = 2 + 21 . Combining this with our previous result, we find


b g
= 21 + . Thus, the law of refraction yields

n=
bg
sin
=
c b gh
sin 21 +
b g
sin 2 b g
sin 21
.
56. (a) We use subscripts b and r for the blue and red light rays. Snells law gives

2b = sin11.343 sin(70) = 44.403


1

2r = sin11.331 sin(70) = 44.911
1

for the refraction angles at the first surface (where the normal axis is vertical). These rays
strike the second surface (where A is) at complementary angles to those just calculated
(since the normal axis is horizontal for the second surface). Taking this into
consideration, we again use Snells law to calculate the second refractions (with which
the light re-enters the air):

3b = sin1[1.343sin(90 2b)] = 73.636


3r = sin1[1.331sin(90 2r)] = 70.497

which differ by 3.1 (thus giving a rainbow of angular width 3.1).

(b) Both of the refracted rays emerges from the bottom side with the same angle (70)
with which they were incident on the topside (the occurrence of an intermediate reflection
[from side 2] does not alter this overall fact: light comes into the block at the same angle
that it emerges with from the opposite parallel side). There is thus no difference (the
difference is 0) and thus there is no rainbow in this case.
57. Reference to Fig. 33-24 may help in the visualization of why there appears to be a
circle of light (consider revolving that picture about a vertical axis). The depth and the
radius of that circle (which is from point a to point f in that figure) is related to the
tangent of the angle of incidence. Thus, the diameter D of the circle in question is

LM FG 1 IJ OP = 2b80.0 cmg tan Lsin FG 1 IJ O = 182 cm.


D = 2h tan c = 2h tan sin 1
N H n KQ
w
MN H 133
1

. K PQ
58. The critical angle is c = sin 1
FG 1 IJ = sin FG 1 IJ = 34 .
1
H nK H 18. K
59. (a) We note that the complement of the angle of refraction (in material 2) is the
critical angle. Thus,
2
n
n1 sin = n2 cos c = n2 1 3 = n22 n32
n2

leads to = 26.8.

(b) Increasing leads to a decrease of the angle with which the light strikes the interface
between materials 2 and 3, so it becomes greater than the critical angle; therefore, there
will be some transmission of light into material 3.
60. (a) Reference to Fig. 33-24 may help in the visualization of why there appears to be a
circle of light (consider revolving that picture about a vertical axis). The depth and the
radius of that circle (which is from point a to point f in that figure) is related to the
tangent of the angle of incidence. The diameter of the circle in question is given by d =
2h tan c. For water n = 1.33, so Eq. 33-47 gives sin c = 1/1.33, or c = 48.75. Thus,

d = 2h tan c = 2(2.00 m)(tan 48.75) = 4.56 m.

(b) The diameter d of the circle will increase if the fish descends (increasing h).
61. (a) In the notation of this problem, Eq. 33-47 becomes

n3
c = sin 1
n2

which yields n3 = 1.39 for c = = 60.

(b) Applying Eq. 33-44 law to the interface between material 1 and material 2, we have

n2 sin 30 = n1 sin

which yields = 28.1.

(c) Decreasing will increase and thus cause the ray to strike the interface (between
materials 2 and 3) at an angle larger than c. Therefore, no transmission of light into
material 3 can occur.
62. (a) The condition (in Eq. 33-44) required in the critical angle calculation is 3 = 90.
Thus (with 2 = c, which we dont compute here),

n1 sin 1 = n2 sin 2 = n3 sin 3

leads to 1 = = sin1 n3/n1 = 54.3.

(b) Yes. Reducing leads to a reduction of 2 so that it becomes less than the critical
angle; therefore, there will be some transmission of light into material 3.

(c) We note that the complement of the angle of refraction (in material 2) is the critical
angle. Thus,

n1 sin = n2 cos c = n2
Fn I
1 G J
2

= n22 n32
Hn K
3

leads to = 51.1.

(d) No. Reducing leads to an increase of the angle with which the light strikes the
interface between materials 2 and 3, so it becomes greater than the critical angle.
Therefore, there will be no transmission of light into material 3.
63. When examining Fig. 33-62, it is important to note that the angle (measured from the
central axis) for the light ray in air, , is not the angle for the ray in the glass core, which
we denote ' . The law of refraction leads to

1
sin = sin
n1

assuming nair = 1. The angle of incidence for the light ray striking the coating is the
complement of ', which we denote as 'comp and recall that

sin comp = cos = 1 sin 2 .

In the critical case, 'comp must equal c specified by Eq. 33-47. Therefore,

n2
= sin comp = 1 sin 2 = 1
1FGsin
IJ 2

n1 n1H K
which leads to the result: sin = n12 n22 . With n1 = 1.58 and n2 = 1.53, we obtain

c
= sin 1 158
. 2 153 h
. 2 = 23.2 .
64. (a) We note that the upper-right corner is at an angle (measured from the point where
the light enters, and measured relative to a normal axis established at that point [the
normal at that point would be horizontal in Fig. 33-63) is at tan1(2/3) = 33.7. The angle
of refraction is given by
nair sin 40 = 1.56 sin 2

which yields 2 = 24.33 if we use the common approximation nair = 1.0, and yields 2 =
24.34 if we use the more accurate value for nair found in Table 33-1. The value is less
than 33.7 which means that the light goes to side 3.

(b) The ray strikes a point on side 3 which is 0.643 cm below that upper-right corner, and
then (using the fact that the angle is symmetrical upon reflection) strikes the top surface
(side 2) at a point 1.42 cm to the left of that corner. Since 1.42 cm is certainly less than 3
cm we have a self-consistency check to the effect that the ray does indeed strike side 2 as
its second reflection (if we had gotten 3.42 cm instead of 1.42 cm, then the situation
would be quite different).

(c) The normal axes for sides 1 and 3 are both horizontal, so the angle of incidence (in the
plastic) at side 3 is the same as the angle of refraction was at side 1. Thus,

1.56 sin 24.3 = nair sin air air = 40 .

(d) It strikes the top surface (side 2) at an angle (measured from the normal axis there,
which in this case would be a vertical axis) of 90 2 = 66 which is much greater than
the critical angle for total internal reflection (sin1(nair /1.56 ) = 39.9). Therefore, no
refraction occurs when the light strikes side 2.

(e) In this case, we have


nair sin 70 = 1.56 sin 2

which yields 2 = 37.04 if we use the common approximation nair = 1.0, and yields 2 =
37.05 if we use the more accurate value for nair found in Table 33-1. This is greater than
the 33.7 mentioned above (regarding the upper-right corner), so the ray strikes side 2
instead of side 3.

(f) After bouncing from side 2 (at a point fairly close to that corner) to goes to side 3.

(g) When it bounced from side 2, its angle of incidence (because the normal axis for side
2 is orthogonal to that for side 1) is 90 2 = 53 which is much greater than the critical
angle for total internal reflection (which, again, is sin1(nair /1.56 ) = 39.9). Therefore, no
refraction occurs when the light strikes side 2.

(h) For the same reasons implicit in the calculation of part (c), the refracted ray emerges
from side 3 with the same angle (70) that it entered side 1 at (we see that the occurrence
of an intermediate reflection [from side 2] does not alter this overall fact: light comes into
the block at the same angle that it emerges with from the opposite parallel side.
65. (a) No refraction occurs at the surface ab, so the angle of incidence at surface ac is
90 . For total internal reflection at the second surface, ng sin (90 ) must be greater
than na. Here ng is the index of refraction for the glass and na is the index of refraction for
air. Since sin (90 ) = cos , we want the largest value of for which ng cos na.
Recall that cos decreases as increases from zero. When has the largest value for
which total internal reflection occurs, then ng cos = na, or

F n I = cos FG 1 IJ = 48.9 .
= cos1 GH n JK
a

g
1
H 152
. K

The index of refraction for air is taken to be unity.

(b) We now replace the air with water. If nw = 1.33 is the index of refraction for water,
then the largest value of for which total internal reflection occurs is

F n I = cos FG 133
. I
J = 29.0 .
= cos1 GH n JK
w

g
1
H 152
. K
66. (a) We refer to the entry point for the original incident ray as point A (which we take
to be on the left side of the prism, as in Fig. 33-57), the prism vertex as point B, and the
point where the interior ray strikes the right surface of the prism as point C. The angle
between line AB and the interior ray is (the complement of the angle of refraction at the
first surface), and the angle between the line BC and the interior ray is (the complement
of its angle of incidence when it strikes the second surface). When the incident ray is at
the minimum angle for which light is able to exit the prism, the light exits along the
second face. That is, the angle of refraction at the second face is 90, and the angle of
incidence there for the interior ray is the critical angle for total internal reflection. Let 1
be the angle of incidence for the original incident ray and 2 be the angle of refraction at
the first face, and let 3 be the angle of incidence at the second face. The law of refraction,
applied to point C, yields n sin 3 = 1, so

sin 3 = 1/n = 1/1.60 = 0.625 3 = 38.68.

The interior angles of the triangle ABC must sum to 180, so + = 120. Now, =
90 3 = 51.32, so = 120 51.32 = 69.68. Thus, 2 = 90 = 21.32. The law of
refraction, applied to point A, yields

sin 1 = n sin 2 = 1.60 sin 21.32 = 0.5817.

Thus 1 = 35.6.

(b) We apply the law of refraction to point C. Since the angle of refraction there is the
same as the angle of incidence at A, n sin 3 = sin 1. Now, + = 120, = 90 3,
and = 90 2, as before. This means 2 + 3 = 60. Thus, the law of refraction leads to

sin 1 = n sin ( 60 2 ) sin 1 = n sin 60 cos 2 n cos 60 sin 2

where the trigonometric identity

sin(A B) = sin A cos B cos A sin B

is used. Next, we apply the law of refraction to point A:

sin 1 = n sin 2 sin 2 = (1/ n ) sin 1

c h
which yields cos 2 = 1 sin 2 2 = 1 1 / n 2 sin 2 1 . Thus,

b g
sin 1 = n sin 60 1 1 / n sin 2 1 cos 60 sin 1
2

or
b1 + cos 60g sin = sin 60
1 n 2 sin 2 1 .

Squaring both sides and solving for sin 1, we obtain

n sin 60 . sin 60
160
sin 1 = = = 0.80
b1 + cos 60g + sin 60 b1 + cos 60g + sin 60
2 2 2 2

and 1 = 53.1.
67. (a) A ray diagram is shown below.

Let 1 be the angle of incidence and 2 be the angle of refraction at the first surface. Let
3 be the angle of incidence at the second surface. The angle of refraction there is 4 =
90. The law of refraction, applied to the second surface, yields n sin 3 = sin 4 = 1. As
shown in the diagram, the normals to the surfaces at P and Q are perpendicular to each
other. The interior angles of the triangle formed by the ray and the two normals must sum
to 180, so 3 = 90 2 and

b g
sin 3 = sin 90 2 = cos 2 = 1 sin 2 2 .

According to the law of refraction, applied at Q, n 1 sin 2 2 = 1. The law of refraction,


applied to point P, yields sin 1 = n sin 2, so sin 2 = (sin 1)/n and

sin 2 1
n 1 = 1.
n2

Squaring both sides and solving for n, we get

n = 1 + sin 2 1 .

(b) The greatest possible value of sin2 1 is 1, so the greatest possible value of n is
nmax = 2 = 141
. .

(c) For a given value of n, if the angle of incidence at the first surface is greater than 1,
the angle of refraction there is greater than 2 and the angle of incidence at the second
face is less than 3 (= 90 2). That is, it is less than the critical angle for total internal
reflection, so light leaves the second surface and emerges into the air.

(d) If the angle of incidence at the first surface is less than 1, the angle of refraction there
is less than 2 and the angle of incidence at the second surface is greater than 3. This is
greater than the critical angle for total internal reflection, so all the light is reflected at Q.
68. (a) We use Eq. 33-49: B = tan 1nw = tan 1 (133
. ) = 531
. .

(b) Yes, since nw depends on the wavelength of the light.


69. The angle of incidence B for which reflected light is fully polarized is given by Eq.
33-48 of the text. If n1 is the index of refraction for the medium of incidence and n2 is the
index of refraction for the second medium, then

B = tan 1 (n2 / n1 ) = tan 1 (1.53 /1.33) = 49.0.


70. Since the layers are parallel, the angle of refraction regarding the first surface is the
same as the angle of incidence regarding the second surface (as is suggested by the
notation in Fig. 33-66). We recall that as part of the derivation of Eq. 33-49 (Brewsters
angle), the refracted angle is the complement of the incident angle:

2 = ( 1 ) c = 90 1 .

We apply Eq. 33-49 to both refractions, setting up a product:

n2 n3 n3
= (tan B1 2 ) (tan B 23 ) = (tan 1 )(tan 2 ).
n1 n2 n1

Now, since 2 is the complement of 1 we have

1
tan 2 = tan ( 1 ) c = .
tan 1

Therefore, the product of tangents cancel and we obtain n3/n1 = 1. Consequently, the third
medium is air: n3 = 1.0.
71. (a) The first contribution to the overall deviation is at the first refraction:
1 = i r . The next contribution to the overall deviation is the reflection. Noting that
the angle between the ray right before reflection and the axis normal to the back surface
of the sphere is equal to r, and recalling the law of reflection, we conclude that the angle
by which the ray turns (comparing the direction of propagation before and after the
reflection) is 2 = 1802 r . The final contribution is the refraction suffered by the ray
upon leaving the sphere: 3 = i r again. Therefore,

dev = 1 + 2 + 3 = 180 + 2 i 4 r .

(b) We substitute r = sin 1 ( n1 sin i ) into the expression derived in part (a), using the two
given values for n. The higher curve is for the blue light.

(c) We can expand the graph and try to estimate the minimum, or search for it with a
more sophisticated numerical procedure. We find that the dev minimum for red light is
137.63 137.6, and this occurs at i = 59.52.

(d) For blue light, we find that the dev minimum is 139.35 139.4, and this occurs at i
= 59.52.

(e) The difference in dev in the previous two parts is 1.72.


72. (a) The first contribution to the overall deviation is at the first refraction:
1 = i r . The next contribution(s) to the overall deviation is (are) the reflection(s).
Noting that the angle between the ray right before reflection and the axis normal to the
back surface of the sphere is equal to r, and recalling the law of reflection, we conclude
that the angle by which the ray turns (comparing the direction of propagation before and
after [each] reflection) is r = 180 2 r . Thus, for k reflections, we have 2 = k r to
account for these contributions. The final contribution is the refraction suffered by the ray
upon leaving the sphere: 3 = i r again. Therefore,

dev = 1 + 2 + 3 = 2( i r ) + k (180 2 r ) = k (180) + 2 i 2(k + 1) r .

(b) For k = 2 and n = 1.331 (given in Problem 33-71), we search for the second-order
rainbow angle numerically. We find that the dev minimum for red light is 230.37
230.4 , and this occurs at i = 71.90.

(c) Similarly, we find that the second-order dev minimum for blue light (for which n =
1.343) is 233.48 233.5 , and this occurs at i = 71.52.

(d) The difference in dev in the previous two parts is approximately 3.1.

(e) Setting k = 3, we search for the third-order rainbow angle numerically. We find that
the dev minimum for red light is 317.5, and this occurs at i = 76.88.

(f) Similarly, we find that the third-order dev minimum for blue light is 321.9, and this
occurs at i = 76.62.

(g) The difference in dev in the previous two parts is 4.4.


73. Let 1 = 45 be the angle of incidence at the first surface and 2 be the angle of
refraction there. Let 3 be the angle of incidence at the second surface. The condition for
total internal reflection at the second surface is n sin 3 1. We want to find the smallest
value of the index of refraction n for which this inequality holds. The law of refraction,
applied to the first surface, yields n sin 2 = sin 1. Consideration of the triangle formed
by the surface of the slab and the ray in the slab tells us that 3 = 90 2. Thus, the
condition for total internal reflection becomes

1 n sin(90 2) = n cos 2.

Squaring this equation and using sin2 2 + cos2 2 = 1, we obtain 1 n2 (1 sin2 2).
Substituting sin 2 = (1/n) sin 1 now leads to

FG
1 n2 1
IJ
sin 2 1
= n 2 sin 2 1 .
H n 2
K
The largest value of n for which this equation is true is given by 1 = n2 sin2 1. We
solve for n:
n = 1 + sin 2 1 = 1 + sin 2 45 = 122
. .
74. Since some of the angles in Fig. 33-70 are measured from vertical axes and some are
measured from horizontal axes, we must be very careful in taking differences. For
instance, the angle difference between the first polarizer struck by the light and the
second is 110 (or 70 depending on how we measure it; it does not matter in the final
result whether we put 1 = 70 or put 1 = 110). Similarly, the angle difference
between the second and the third is 2 = 40, and between the third and the fourth is 3
= 40, also. Accounting for the automatic reduction (by a factor of one-half) whenever
unpolarized light passes through any polarizing sheet, then our result is the incident
intensity multiplied by
1
cos 2 (1 ) cos 2 ( 2 ) cos 2 ( 3 ) .
2

Thus, the light that emerges from the system has intensity equal to 0.50 W/m2.
75. Let be the angle of incidence and 2 be the angle of refraction at the left face of the
plate. Let n be the index of refraction of the glass. Then, the law of refraction yields sin
= n sin 2. The angle of incidence at the right face is also 2. If 3 is the angle of
emergence there, then n sin 2 = sin 3. Thus sin 3 = sin and 3 = .

The emerging ray is parallel to the incident ray. We wish to derive an expression for x in
terms of . If D is the length of the ray in the glass, then D cos 2 = t and D = t/cos 2.
The angle in the diagram equals 2 and

x = D sin = D sin ( 2).


Thus,
t sin ( 2 )
x= .
cos 2

If all the angles , 2, 3, and 2 are small and measured in radians, then sin , sin
2 2, sin( 2) 2, and cos 2 1. Thus x t( 2). The law of refraction
applied to the point of incidence at the left face of the plate is now n2, so 2 /n
and
FG
xt
IJ b g
n 1 t
H n K
=
n
.
76. (a) Suppose there are a total of N transparent layers (N = 5 in our case). We label
these layers from left to right with indices 1, 2, , N. Let the index of refraction of the air
be n0. We denote the initial angle of incidence of the light ray upon the air-layer boundary
as i and the angle of the emerging light ray as f. We note that, since all the boundaries
are parallel to each other, the angle of incidence j at the boundary between the j-th and
the (j + 1)-th layers is the same as the angle between the transmitted light ray and the
normal in the j-th layer. Thus, for the first boundary (the one between the air and the first
layer)
n1 sin i
= ,
n0 sin 1

for the second boundary


n2 sin 1
= ,
n1 sin 2

and so on. Finally, for the last boundary

n0 sin N
= ,
nN sin f

Multiplying these equations, we obtain

FG n IJ FG n IJ FG n IJ " FG n IJ = FG sin IJ FG sin IJ FG sin IJ " F sin I .


H n K H n K H n K H n K H sin K H sin K H sin K GH sin JK
1 2 3 0 i 1 2 N

0 1 2 N 1 2 3 f

We see that the L.H.S. of the equation above can be reduced to n0/n0 while the R.H.S. is
equal to sini/sinf. Equating these two expressions, we find

sin f =
FG n IJ sin = sin i ,
Hn K
0
i
0

which gives i = f. So for the two light rays in the problem statement, the angle of the
emerging light rays are both the same as their respective incident angles. Thus, f = 0 for
ray a,

(b) and f = 20 for ray b.

(c) In this case, all we need to do is to change the value of n0 from 1.0 (for air) to 1.5 (for
glass). This does not change the result above. That is, we still have f = 0 for ray a,

(d) and f = 20 for ray b.

Note that the result of this problem is fairly general. It is independent of the number of
layers and the thickness and index of refraction of each layer.
77. The time for light to travel a distance d in free space is t = d/c, where c is the speed of
light (3.00 108 m/s).

(a) We take d to be 150 km = 150 103 m. Then,

d 150 103 m
t= = = 5.00 10 4 s.
c 3.00 108 m / s

(b) At full moon, the Moon and Sun are on opposite sides of Earth, so the distance
traveled by the light is

d = (1.5 108 km) + 2 (3.8 105 km) = 1.51 108 km = 1.51 1011 m.

The time taken by light to travel this distance is

d 1.511011 m
t= = = 500 s = 8.4 min.
c 3.00 108 m/s

(c) We take d to be 2(1.3 109 km) = 2.6 1012 m. Then,

d 2.6 1012 m
t= = = 8.7 103 s = 2.4 h.
c 3.00 10 m / s
8

(d) We take d to be 6500 ly and the speed of light to be 1.00 ly/y. Then,

d 6500 ly
t= = = 6500 y.
c 1.00 ly / y

The explosion took place in the year 1054 6500 = 5446 or 5446 b.c.
78. The law of refraction requires that

sin 1/sin 2 = nwater = const.

We can check that this is indeed valid for any given pair of 1 and 2. For example sin
10 / sin 8 = 1.3, and sin 20 / sin 1530' = 1.3, etc. Therefore, the index of refraction of
water is nwater = 1.3.
79. (a) From kc = where k = 1.00 106 m1, we obtain = 3.00 1014 rad/s. The
magnetic field amplitude is, from Eq. 33-5,

B = E/c = (5.00 V/m)/c = 1.67 108 T.


G G
From the fact that k (the direction of propagation), E = Ey j, and B are mutually
G
perpendicular, we conclude that the only non-zero component of B is Bx, so that we have

Bx = (1.67 108 T) sin[(1.00 106 / m) z + (3.00 1014 / s)t ].

(b) The wavelength is = 2/k = 6.28 106 m.

(c) The period is T = 2/ = 2.09 1014 s.

(d) The intensity is

1 FG 5.00 V m IJ 2

I=
c 0 H 2 K = 0.0332 W m 2 .

G
(e) As noted in part (a), the only nonzero component of B is Bx. The magnetic field
oscillates along the x axis.

(f) The wavelength found in part (b) places this in the infrared portion of the spectrum.
80. (a) Setting v = c in the wave relation kv = = 2f, we find f = 1.91 108 Hz.

(b) Erms = Em/ 2 = Bm/c 2 = 18.2 V/m.

(c) I = (Erms)2/co = 0.878 W/m2.


81. (a) At r = 40 m, the intensity is

P P 4(3.0 103 W)
I= 2 = = = 83 W m 2 .
d 4 ( r ) 4 ( 0.17103 rad ) ( 40 m )
2 2

(b) P = 4 r 2 I = 4 (40 m)2 (83 W m 2 ) = 1.7 10 6 W.


82. (a) Assuming complete absorption, the radiation pressure is

I 1.4 10 3 W m 2
pr = = = 4.7 10 6 N m 2 .
c 3.0 10 8 m s

(b) We compare values by setting up a ratio:

pr 4.7 10 6 N m 2
= = 4.7 10 11 .
p0 1.0 10 N m
5 2
83. (a) The area of a hemisphere is A = 2r2, and we get I = P/A = 3.5 W/m2.

(b) Our part (a) result multiplied by 0.22 m2 gives 0.78 W.

(c) The part (b) answer divided by the A of part (a) leads to1.5 1017 W/m2.

(d) Then Eq. 33-26 gives Erms = 76 nV/m Emax = 2 Erms = 1.1 107 V/m.

(e) Brms = Erms/c = 2.5 1016 T = 0.25 fT.


84. Accounting for the automatic reduction (by a factor of one-half) whenever
unpolarized light passes through any polarizing sheet, then our result is

1 2 3
2 (cos (30)) = 0.21.
85. We remind ourselves that when the unpolarized light passes through the first sheet, its
intensity is reduced by a factor of 2. Thus, to end up with an overall reduction of one-
third, the second sheet must cause a further decrease by a factor of two-thirds (since
(1/2)(2/3) = 1/3). Thus, cos2 = 2/3 = 35.
86. (a) The magnitude of the magnetic field is

E 100 V m
B= = = 3.3 10 7 T.
c 3.0 10 m s
8

G G G G G
(b) With E B = 0 S , where E = Ek and S = S (j) , one can verify easily that since
G
k (i) = j, B has to be in the x direction.
87. From Fig. 33-19 we find nmax = 1.470 for = 400 nm and nmin = 1.456 for = 700 nm.
(a) The corresponding Brewsters angles are

B,max = tan1 nmax = tan1 (1.470) = 55.8,

(b) and B,min = tan1 (1.456) = 55.5.


88. (a) Let r be the radius and be the density of the particle. Since its volume is (4/3)r3,
its mass is m = (4/3)r3. Let R be the distance from the Sun to the particle and let M be
the mass of the Sun. Then, the gravitational force of attraction of the Sun on the particle
has magnitude
GMm 4 GMr 3
Fg = = .
R2 3R 2

If P is the power output of the Sun, then at the position of the particle, the radiation
intensity is I = P/4R2, and since the particle is perfectly absorbing, the radiation pressure
on it is
I P
pr = = .
c 4 R 2 c

All of the radiation that passes through a circle of radius r and area A = r 2 ,
perpendicular to the direction of propagation, is absorbed by the particle, so the force of
the radiation on the particle has magnitude

Pr 2 Pr 2
Fr = pr A = = .
4 R 2 c 4 R 2 c

The force is radially outward from the Sun. Notice that both the force of gravity and the
force of the radiation are inversely proportional to R2. If one of these forces is larger than
the other at some distance from the Sun, then that force is larger at all distances. The two
forces depend on the particle radius r differently: Fg is proportional to r3 and Fr is
proportional to r2. We expect a small radius particle to be blown away by the radiation
pressure and a large radius particle with the same density to be pulled inward toward the
Sun. The critical value for the radius is the value for which the two forces are equal.
Equating the expressions for Fg and Fr, we solve for r:

3P
r= .
16GMc

(b) According to Appendix C, M = 1.99 1030 kg and P = 3.90 1026 W. Thus,

3(3.90 1026 W)
r=
16(6.67 10 11 N m2 / kg 2 )(199
. 1030 kg)(1.0 103 kg / m3 )(3.00 108 m / s)
. 107 m.
= 58
89. (a) The polarization direction is defined by the electric field (which is perpendicular
to the magnetic field in the wave, and also perpendicular to the direction of wave travel).
The given function indicates the magnetic field is along the x axis (by the subscript on B)
and the wave motion is along y axis (see the argument of the sine function). Thus, the
electric field direction must be parallel to the z axis.

(b) Since k is given as 1.57 107/m, then = 2/k = 4.0 107 m, which means f = c/ =
7.5 1014 Hz.

(c) The magnetic field amplitude is given as Bm = 4.0 106 T. The electric field
amplitude Em is equal to Bm divided by the speed of light c. The rms value of the electric
field is then Em divided by 2 . Eq. 33-26 then gives I = 1.9 kW/m2.
90. Using Eqs. 33-40 and 33-42, we obtain

I final ( I 0 / 2 ) ( cos 45 ) ( cos 45 ) 1


2 2

= = = 0.125.
I0 I0 8
91. With the index of refraction n = 1.456 at the red end, since sin c = 1/n, the critical
angle is c = 43.38 for red.

(a) At an angle of incidence of 1 = 42.00 < c, the refracted light is white.

(b) At an angle of incidence of 1 = 43.10 which is slightly less than c, the refracted
light is white but dominated by red end.

(c) At an angle of incidence of 1 = 44.00 > c, there is no refracted light.


92. We apply Eq. 33-40 (once) and Eq. 33-42 (twice) to obtain

1
I= I 0 cos 2 1' cos 2 2'
2

where 1' = 90 1 = 60 and 2' = 90 2 = 60 . This yields I/I0 = 0.031.


93. We write m = V where V = 4 R3 3 is the volume. Plugging this into F = ma and
then into Eq. 33-32 (with A = R2, assuming the light is in the form of plane waves), we
find
4 R 3 IR2
a= .
3 c
This simplifies to
3I
a=
4 cR

which yields a = 1.5 109 m/s2.


94. We apply Eq. 33-40 (once) and Eq. 33-42 (twice) to obtain

1
I= I 0 cos 2 1' cos 2 2'
2

where 1' = (90 1 ) + 2 = 110 is the relative angle between the first and the second
polarizing sheets, and 2' = 90 2 = 50 is the relative angle between the second and the
third polarizing sheets. Thus, we have I/I0 = 0.024.
95. We apply Eq. 33-40 (once) and Eq. 33-42 (twice) to obtain

1
I= I 0 cos 2 cos 2 .
2

With = 2 1 = 60 20 = 40 and = 3 + ( / 2 2 ) = 40 + 30 = 70, we get


I/I0 = 0.034.
96. We use Eq. 33-33 for the force, where A is the area of the reflecting surface (4.0 m2).
The intensity is gotten from Eq. 33-27 where P = PS is in Appendix C (see also Sample
Problem 33-2) and r = 3.0 1011 m (given in the problem statement). Our result for the
force is 9.2 N.
97. Eq. 33-5 gives B = E/c, which relates the field values at any instant and so relates
rms values to rms values, and amplitude values to amplitude values, as the case may be.
Thus, the rms value of the magnetic field is

Brms = (0.200 V/m)/(3 108 m/s) = 6.67 1010 T,

which (upon multiplication by 2 ) yields an amplitude value of magnetic field equal to


9.43 1010 T.
98. (a) The Sun is far enough away that we approximate its rays as parallel in this
Figure. That is, if the sunray makes angle from horizontal when the bird is in one
position, then it makes the same angle when the bird is any other position. Therefore,
its shadow on the ground moves as the bird moves: at 15 m/s.

(b) If the bird is in a position, a distance x > 0 from the wall, such that its shadow is on
the wall at a distance 0 y h from the top of the wall, then it is clear from the Figure
that tan = y/x. Thus,

dy dx
= tan = ( 15 m / s) tan 30 = 8.7 m / s,
dt dt

which means that the distance y (which was measured as a positive number downward
from the top of the wall) is shrinking at the rate of 8.7 m/s.

(c) Since tan grows as 0 < 90 increases, then a larger value of |dy/dt| implies a
larger value of . The Sun is higher in the sky when the hawk glides by.

(d) With |dy/dt| = 45 m/s, we find


dx dy / dt
vhawk = =
dt tan

so that we obtain = 72 if we assume vhawk = 15 m/s.


99. (a) The wave is traveling in the y direction (see 16-5 for the significance of the
relative sign between the spatial and temporal arguments of the wave function).

(b) Figure 33-5 may helpG in visualizing this. The direction of propagation (along the y
axis) is perpendicular to B (presumably along the x axis,
G since the problem gives Bx and
no other component) and both are perpendicular to E (which determines the axis of
polarization). Thus, the wave is z-polarized.

(c) Since the magnetic field amplitude is Bm = 4.00 T, then (by Eq. 33-5) Em = 1199
V/m 1.20 103 V/m . Dividing by 2 yields Erms = 848 V/m. Then, Eq. 33-26 gives

I
I= 2
E rms = 191
. 103 W / m2 .
c 0

(d) Since kc = (equivalent to c = f ), we have

2.00 1015
k= = 6.67 106 m1 .
c

Summarizing the information gathered so far, we have (with SI units understood)

Ez = (1.2 103 V/m) sin[(6.67 106 / m) y + (2.00 1015 / s)t ].

(e) = 2/k = 942 nm.

(f) This is an infrared light.


100. (a) The angle of incidence B,1 at B is the complement of the critical angle at A; its
sine is
2
n
sin B ,1 = cos c = 1 3
n2

so that the angle of refraction B,2 at B becomes

n3
2 2
n2 1 n2
B ,2 = sin1
1 = sin 1 = 35.1 .
n3 n2 n3

(b) From n1 sin = n2 sin c = n2(n3/n2), we find

n3
= sin 1 = 49.9 .
n1

(c) The angle of incidence A,1 at A is the complement of the critical angle at B; its sine is

2
n
sin A,1 = cos c = 1 3 .
n2

so that the angle of refraction A,2 at A becomes

n3
2 2
n2 1 n2
A,2 = sin1
1 = sin 1 = 35.1 .
n3 n2 n3

(d) From
2
n
n1 sin = n2 sin A,1 = n2 1 3 = n22 n32 ,
n2

we find
n2 n2
= sin 1 2 3
= 26.1
n1

(e) The angle of incidence B,1 at B is the complement of the Brewster angle at A; its sine
is
n2
sin B ,1 =
n22 + n32
so that the angle of refraction B,2 at B becomes

n22
B ,2 1
= sin = 60.7 .
n n2 + n2
3 2 3

(f) From
n3
n1 sin = n2 sin Brewster = n2 ,
n + n32
2
2

we find
n2 n3
= sin 1 = 35.3 .
n n2 + n2
1 2 3
101. (a) and (b) At the Brewster angle, incident + refracted = B + 32.0 = 90.0, so B =
58.0 and
nglass = tan B = tan 58.0 = 1.60.
102. We take the derivative with respect to x of both sides of Eq. 33-11:

E 2 E B 2B
= = = .
x x x 2 x t xt

Now we differentiate both sides of Eq. 33-18 with respect to t:

FGB IJ
2 B
0 0
E FG 2 E
= 0 0 2 .
IJ
t

Hx
=
K =
xt t t H t K
Substituting 2 E x 2 = 2 B xt from the first equation above into the second one, we
get
2 E 2 E 2 E 1 2 E 2 E
2
0 0 2 = 2 = = c .
t x t 2 0 0 x 2 x 2

Similarly, we differentiate both sides of Eq. 33-11 with respect to t

2 E 2 B
= 2 ,
xt t

and differentiate both sides of Eq. 33-18 with respect to x

2 B 2 E
2 = 00 .
x xt

Combining these two equations, we get

2 B 1 2 B 2 B
2
= =c .
t 2 0 0 x 2 x 2
103. (a) From Eq. 33-1,

2 E 2
= Em sin( kx t ) = 2 Em sin ( kx t ),
t 2 t 2
and

2 E 2
2
c2 = c E m sin( kx t ) = k 2 c 2 sin( kx t ) = 2 Em sin ( kx t ).
x 2
x 2

Consequently,
2 E 2 E
2
= c
t 2 x 2

is satisfied. Analogously, one can show that Eq. 33-2 satisfies

2 B 2 B
2
= c .
t 2 x 2

(b) From E = Em f ( kx t ),

2 E 2 f ( kx t ) d2 f
= E = 2
E
t 2 t 2
m m
du 2 u = kx t

and
2 E 2 f ( kx t ) 2
2d f
c2 = c 2
E = c 2
E k
x 2 t 2
m m
du 2 u = kx t

Since = ck the right-hand sides of these two equations are equal. Therefore,

2 E 2 E
2
= c .
t 2 x 2

Changing E to B and repeating the derivation above shows that B = Bm f ( kx t )


satisfies
2 B 2 B
2
=c .
t 2 x 2
104. Since intensity is power divided by area (and the area is spherical in the isotropic
case), then the intensity at a distance of r = 20 m from the source is

P
I= = 0.040 W m 2 .
4 r 2

as illustrated in Sample Problem 33-2. Now, in Eq. 33-32 for a totally absorbing area A,
we note that the exposed area of the small sphere is that on a flat circle A = (0.020 m)2 =
0.0013 m2. Therefore,

IA (0.040)(0.0013)
F= = = 1.7 10 13 N.
c 3 10 8
Captulo 33
T 1. (a) (Use a Fig. 33-5). Do lado direito do retngulo,.
aponta no sentido negativo do eixo y; do lado esquerdo, + d
maior e aponta no mesmo sentido; (b) aponta para baixo. Do
lado direito, B aponta no sentido negativo do eixo z; uo lauo e:;-
querdo, + d maior e aponta no mesmo sentido. 2. sentido
positivo de x 3. (a) permanece constante; (b) diminui 4. a, d, b,
e (zero) 5. a P 1. () sentido positivo do eixo z; (b) x 3.
(a) e (b) A = 1, n = 4, e = 30 5. (a) permanece constante; (b)
aumenta;(c) diminui 7.a, b, e 9.nenhuma 11.B PR 1.
(a) 515 nm; (b) 610nm; (c) 555 nm;(d) 5,41 X 10 14 Hz; (e) 1,85 X
10- 15 s 3.7,49GHz 5.5,ox10- 21 H 7.0,lOMJ 9.(a)6,7
nT; (b) y; (c) no sentido negativo do eixo y 11.1,2 MW/m 2 13.
(a) 6,7nT;(b) 5,3 mW/m 2 ; (c) 6,7W 15.(a) 1,03 kV/m;(b) 3,43
T 17.(a)87mV/m;(b)0,29nT;(c)6,3kW 19.5,9x10- 8
Pa 21.1,0 X 107 Pa 25. (a) 1,0 X 10 8 Hz; (b) 6,3 X 108 rad/s; (c)
2,1 m - 1; (d) 1,0 ,uT; (e) z; (f) 1,2 X 102 W/m2 ; (g) 8,0 X 10- 7 N; (h)
4,0 X 10- 7 pa 27.1,9mm/s 29.(a)4,68 x 10 11 W; (b) qualquer
pequena perturbao tiraria a esfera da posio de equilbrio,
pois nesse caso as duas foras deixariam de atuar ao longo do
mesmo eixo 31. (a) 0,17 m; (b) para perto do Sol 33. 4,4
W/m2 35.3,1 % 37.(a) 1,9V/m;(b) 1,7 x 10- 11 Pa 39.20
ou 70 41. 0,67 43. (a) 2 filtros; (b) 5 filtros 45.1,48 47.
180 49. 1,26 51.1,07 m 53. (a) 56,9 ; (b) 35,3 57.182
cm 59.(a) 26,8 ; (b) sim 61.(a) 1,39; (b) 28,l ; (c) no 63.
23,2 65. (a) 48,9 ; (b) 29,0 67. (a) ( 1 + s e n2 0)5; (b) 2 ,s ; (c)
sim; (d) no 69.49,0 71. (c) 137,6 ; (d) 139,4 ; (e) 1,7 73.
1,22 77.(a) 0,50ms;(b) 8,4min;(c) 2,4 h; (d) 5446 a.C. 79. (a)
(16,7 nT) sen[(l,00 X 10 6 m - 1) z + (3,00 x 1014 1) t]; (b) 6,28
,um; (c) 20,9 fs; (d) 33,2 mW/m 2 ; (e) x; (f) infravermelho 81.
(a) 83 W/m2 ;(b) 1,7 MW 83. (a) 3,5 ,uW/m 2; (b) 0,78 W; (c)
1,5 X 10- 17 W/m2 ; (d) l ,1 X 10- 7 V/m; (e) 0,25 fT 85.35 87.
(a) 55,8 ; (b) 55,5 89.(a) o eixo z;(b) 7,5 X 10 14 Hz; (c) 1,9
kW/m2 91. (a) branca; (b) avermelhada; (c) no h luz refra-
tada 93.1,5x10- 9 m/s2 95.0,034 97.9,43x10- 10 T 99.(a)
- y ; (b) z; (c) 1,91 kW/m 2 ; (d) E, = (1,20 kV/m) sen[(6,67 x 106
m- 1) y + (2,00 X 10 15 s- 1) t]; (e) 942 nm; (f) infravermelho 101.
(a) 1,60; (b) 58,0"

Potrebbero piacerti anche