Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Disclaimer:
Copyright of this catalogue vests with Form-Scaff, a division of Waco Africa (Proprietary) Limited (Form-Scaff) and extends inter alia, to the making
While every effort has been made to ensure the accuracy of the information in this catalogue, we cannot accept responsibility for any errors which
may occur as a result of reliance on the contents of this catalogue and are not liable for any loss of any nature that may be incurred as a result of such
reliance. Details of any of the products may change without prior notice.
The customer must ensure that good practice is adopted on site by competent persons and that the products shown in this catalogue are erected,
used and stripped in accordance with the relevant Codes of Practice and the OHS Act and Regulations 85 of 1993. This catalogue does not contain
any design detail, but lists and depicts the items available under this product range. The responsibility for design is the responsibility of the customer.
Note: The colours used in this document are for illustrative purposes only and may differ from actual products.
Kwik-Stage Access
Page 6 Boards
Page 10 Staircases
Page 11 Fittings
Page 12 Bracing
Kwik-Stage Decking
Page 20 Beams
Page 22 Panels
Contact Details
System Features
Base Jacks
Kwik-Stage Base Jacks are inserted into the bottom end of
Kwik-Stage Standards to provide the required vertical
height adjustment.
Standards
Kwik-Stage Standards are used to form the vertical supports for
bearers, formwork and access.
Connectors
Kwik-Stage Connectors are used to locate Standards on top
of each other.
Application - Kwik-Stage
Ledger
Connector
Standard
Base Jack
Sole Plate
Toe Boards
Kwik-Stage Toe Boards ensure a safe working platform by
providing a solid kick plate.
Standard
Ledger
Toe Board
Hook-On Board
Castors
Kwik-Stage Castors are available for mobile towers. Castor wheels
are available in spigot and jacking types.
Hook-On Board
Trap Door
Hook-On Ladder
Jacking Castor
Staircase Handrails
Kwik-Stage Handrails provide a safe handrail to the Staircase.
Application - Staircases
Staircase
Staircase Handrail
Standard
Base Jack
10
90 Couplers
90 Couplers are used to attach a Scaffold Tube to a Standard
at 90.
Flange Couplers
Flange Couplers attach a Scaffold Tube to the flange
of a channel iron or I beam.
Scaffold Tubes
Scaffold Tubes are used for a variety of applications in supportwork
and access scaffolding, i.e. bracing, lacing, handrails etc.
Swivel Couplers
Swivel Couplers attach Scaffold Tubes to Standards in
any direction.
12
System Features
Kwik-Strip facility.
to decking.
14
Base Jacks
Kwik-Stage Base Jacks are inserted into the bottom end of
Kwik-Stage Standards to provide the required vertical
height adjustment.
Standards
Kwik-Stage Standards are used to form the vertical supports
for bearers, formwork and access.
Connectors
Kwik-Stage Connectors are used to locate Standards on top
of each other.
16
Bridging Ledgers
Kwik-Stage Bridging Ledgers are used to bridge between two
Standards, reducing the number of Standards required.
Standard
Ledger
Base Jack
Sole Plate
J-Heads
J-Heads support other types of bearers on top of Kwik-Stage
support, this could include timber and steel bearers.
18
Kwik-Strip Beam
Ledger
Standard
Telescopic Beams
Telescopic Beams facilitate make-up sections between the
last beam and the slab edge against a wall or concrete beam.
Folded Sections
Folded Sections facilitate make-up sections between the last
beam and the slab edge against a wall or concrete beam.
20
Timber Cleat
Timber
Folded Section Cleat
Telescopic
Beam
Kwik-Strip
Beam Kwik-Strip
Beam
Deck Fillers
Deck Fillers facilitate make-up sections by sliding over
the adjacent Deck Panels.
Cantilever Brackets
Kwik-Stage Cantilever Brackets are used to cantilever out from
the existing lower floor slab to facilitate the top slab edge and
working platform.
22
Kwik-Strip Beam
Double Headed
Jack
Ledger
Cantilever Bracket
Standard
Base Jack
Scaffold Tubes
Scaffold Tubes are used for a variety of applications in support
work and access scaffolding, i.e. bracing, lacing, handrails etc.
Swivel Couplers
Swivel Couplers attach a Scaffold Tube to a Standard in
any direction.
24
Application - Handrails
Ledger
Standard
Swivel Couplers
26
Beam Bearers
Kwik-Stage Beam Bearers are supported on two Kwik-Strip
beams. The Beam Bearer supports an Econo-Form Panel as
a beam soffit. The Beam Stay plumbs the Beam Side Panel.
Beam Stay
Deck Panel
Beam Bearer
Ledger
B-Clamp
Base Pedestal
Standard
Econo-Form
Panel
Swivel Coupler
Beam Stay
Beam Bearer
Base Pedestal
28