Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
2 Velan reserves the right to change this information without notice. 2015 Velan Inc. All rights reserved.
Montreal, Canada Lyon, France Ansan City, South Korea Granby, Canada
Velan Inc., Plant 1 Velan S.A.S. Velan Ltd., Plant 1 VelCAN
Montreal, Canada Mennecy, France Ansan City, South Korea Benicia, CA, U.S.A.
Velan Inc., Plant 2 and 7 Segault S.A. Velan Ltd., Plant 2 VelCAL
Granby, Canada Leicester, UK Ansan City, South Korea Marietta, GA, U.S.A.
Velan Inc., Plant 4 and 6 Velan Valves Ltd. Velan Ltd., Plant 3 VelEAST
ASME N-stamp
accredited manufacturer
Velan reserves the right to change this information without notice. 2015 Velan Inc. All rights reserved. 3
y-pattern (inclined)
ball, metal-seated
check, dual-plate
no slam check
A one-stop valve shop
check, piston
check, swing
parallel slide
triple-offset
check, ball
steam trap
tilting disc
butterfly
Velan offers one of the most
control
needle
angle
knife
comprehensive valve product
gate
Valve PRODUCT LINES
lines available from any
Pressure seal and bolted bonnet
manufacturer. From the most
Cryogenic
Our valves are available with
Cryogenic control
a large selection of steel body
Control and choke
materials, trims, options and
HIPPS, ESDV and line break
accessories. With options such
Subsea
as bypasses and equalizers
to special trims for HF acid or Steam traps
NACE service, Velan can provide
valves built to your needs (1) The API designation defines the product design basis even though not all the valves are covered in the referenced
API specification. These valves are also used in non-API service.
often directly from our sales
networks extensive stock.
4 Velan reserves the right to change this information without notice. 2015 Velan Inc. All rights reserved.
alloy steel
fire tested
cryogenic
Chemical
ASME N
TA LUFT
Mining
API 6A
API 6D
Power
HVAC
high
PED
low
(2) Available in Class 800 in threaded and welded end connections. 150 psi max.
Inherently fire safe
Velan reserves the right to change this information without notice. 2015 Velan Inc. All rights reserved. 5
Forged pressure seal and large API 600* Cast steel gate, globe, API 603* Corrosion-resistant Comprehensive range of small
bolted bonnet gate, globe, and and check valves for a broad stainless steel gate, globe, forged gate, globe, check, angle,
check valves for high pressure range of applications and swing check valves and bellows seal valves
and high temperature service
Sizes: NPS 264 (DN 501600) Sizes: NPS 24 (DN 15600) Sizes: NPS 4 (DN 8100)
ASME classes: 1501500 ASME classes: 150600 ASME classes: 1504500
Sizes: NPS 224 (DN 50600)
ASME classes: 1504500
Worlds largest manufacturer Gate, globe (stop and needle), Bolted and welded bonnet
of cast steel gate, globe, and and check (stop and swing) body styles
One-piece forged bodies for
check valves valve types Gate, globe (angle, needle,
superior strength and quality
Bubble-tight shut-off of gate Available in cast stainless steel and stop), and check (ball,
Live-loaded bonnet as a
valves up to NPS 12 (DN 300) Integral seat design piston, and swing)
standard feature(1)
Gate, globe (needle and stop), valve types
Graphite pressure seal gasket Precision high quality invest-
and check (swing and piston) ment castings Available in forged carbon,
Machined body guides and a valve types stainless, alloy (including F91),
robust torque arm assembly Wall thickness to ASME B16.34 and nickel alloy steels
Available in cast carbon,
Gate (flexible wedge and stainless, alloy, and nickel Option integral CoCr alloy Standard low fugitive emission
parallel slide), globe (angle, alloy steels seat face available for longer packing and also available with
needle and stop), and check service life bellows seal for zero emission
Standard low fugitive emission
(piston, swing, stop, and tilting Available for cryogenic and services
packing and also available with
disc) valve types NACE (sour gas) services
bellows seal for zero emission Available for block and bleed,
Optional cast product offering services cryogenic, HF acid, NACE
Available in carbon, stainless, Available for block and bleed, (sour gas), and nuclear
alloy (including F91), and cryogenic, HF acid, NACE services
nickel alloy steels (sour gas), and nuclear
Available for catalytic services
reforming, NACE (sour gas)
and nuclear services
(1) Applicable to certain sizes and
pressure classes contact factory
for verification.
* The API designation defines the product design basis even though not all the valves are covered in the referenced API specification.
These valves are also used in non-API service.
6 Velan reserves the right to change this information without notice. 2015 Velan Inc. All rights reserved.
Forged, one-piece high pressure Standard and bolted bonnet, all Retainerless dual-plate check valves API 6D and 6A axial flow and swing
y-pattern, oblique, vertical and stainless steel knife gate valves for a broad range of applications type check and through conduit slab
angle valves and double expanding gate valves
Sizes: NPS 4 (DN 8100) Sizes: NPS 224 (DN 50600) Sizes: NPS 260 (DN 501500) Sizes: NPS 260 (DN 501500)
ASME classes: 1690 4500 ASME flange: 150 ASME classes: 1502500 ASME classes: 1504500
API 6A classes: 20005000 API 6A classes: 200015000
One-piece forging with All stainless steel design Lightweight and compact-size Axial flow check valve, non-
integral body-bonnet design slam type, spring assisted,
Standard knife gate valves Retainerless design means zero
Fully guided, non-spinning, NPS 224 (DN 50600) and fugitive emissions metal-seated, internal venturi
CoCr alloy disc(1) pattern, very fast response
bolted bonnet, knife gate Self-seating feature extends
Non-rotating stem(1) prevents water hammer, pump
valves NPS 424 (DN 50600) valve life protection.
Rotating/rising stem available 0-14ph packing standard
in XB series Wafer, lug, double flange, Swing check valve(1), non return
Locking device on standard hub-end and butt-weld end valve, metal-seated, swing arm
In-line repairable
knife gate valve body styles operable by a manual override
Globe (needle and stop) and for pipeline pigging operations.
piston check(2) valve types Environmentally friendly Available in carbon, low-
bi-directional bolted bonnet temperature carbon, stainless, Through conduit gate(1), block
Available in forged carbon
steel, stainless, alloy and standard body styles low-alloy, nickel alloy, titanium, valve, soft or metal-seated,
(including F91 and F92), and Resilient and metal seats nickel-alum-bronze, and carbon minimal resistance to the flow,
nickel alloy steels(1) with Inconel 625 cladding reverse acting slab as option.
Available with bellows seal(1) Seating surfaces offered as Double expanding gate(1), block
Available for nuclear(1) and metal-to-metal and soft seat valve with wedge formed by
NACE (sour gas) services Also available for cryogenic two pieces, moveable seats
with angle compensation,
and NACE (sour gas) services
(1) Applicable to Y-pattern valves DB&B feature for isolating the
(see catalog CAT-BG) body cavity from the line.
(2) The piston check valve is designed
with a screwed-in cover. Full range of automation
capabilities see Velan ABV
actuator brochure at:
www.velanabv.com
(1) Sizes up to NPS 236 (DN 50900)
Velan reserves the right to change this information without notice. 2015 Velan Inc. All rights reserved. 7
Resilient-seated ball valves with Severe service metal-seated ball Forged, one-piece metal-seated API 6D and API 6A floating and
value-added technical features valves for high temperature, ball valves for high temperature trunnion-mounted ball valves for
for superior performance abrasive, and corrosive applications and high pressure applications oil and gas, pipeline, offshore,
LNG, and petrochemical process.
Sizes: NPS 24 (DN 8 600) Sizes: NPS 24 (DN 15600) Sizes: NPS 4 (DN 15100) Sizes: NPS 60 (DN 151600)
ASME classes: 150 600 ASME classes: 1504500 ASME classes: 31004500 ASME classes: 1504500
WOG: up to 2000 Temp: up to 1500F (816C) API 6A classes: 200015000
Memoryseal in-tension Shut-off to FCI 70-2 class 6 Forged, one-piece body Side-entry or top-entry or fully
flexible seat design welded body design
Advanced trim coating Different coating options to
Modular double block and
E-20 low emission packing technology best suit the application
bleed valves, also in compact
arrangement Low emission stem seal with Double blowout proof stem face-to-face execution
Fire tested API 607/ISO 10497 live-loaded packing as a Tested to zero-leakage 3 and 4-way ball valves
End-entry, one-piece, standard feature Anti blow-out stem, antistatic,
Live-loading stem/packing fire safe design
split-body, top-entry, unibody, Cast and forged bodies standard
and three-piece body styles Soft (leakage rate: A) or metal-
Available in carbon, stainless, Integral ISO direct mounting seated (leakage rate: D)
(three-piece design includes alloy, duplex, titanium, and
a flexible lip seat) pad for easy automation Self relieving or double piston
nickel alloy steels effect seats
Available in carbon, stainless, Available in A105, F22, F91,
Available for aggressive Available in carbon or low
alloy, and nickel alloy steels and 316/316H temperature carbon steel,
slurries, batch digester
stainless steel, exotic alloys
Available for chlorine, capping, block and bleed,
cryogenic, NACE (sour gas), NACE (sour gas), nuclear, For severe service and
aggressive environments
nuclear, oxygen, throttling, and oxygen service
and vacuum services Extended bonnet for cryogenic
applications
Stem extension for
underground service
Full range of automation
capabilities see Velan ABV
actuator brochure at:
www.velanabv.com
8 Velan reserves the right to change this information without notice. 2015 Velan Inc. All rights reserved.
Complete valve solutions for the Resilient-seated ball valves for Bi-directional, zero-leakage, High performance cryogenic
delayed coker industry and high general use and commodity triple-offset, metal-seated butterfly metal-seated butterfly valves
temperature slurry applications applications valves
Sizes: NPS 3 36 (DN 80 900) Sizes: NPS 2 (DN 850) Sizes: NPS 380 (DN 802000) Sizes: NPS 648 (DN 1501200)
ASME classes: 150 900 WOG: 6002000 ASME classes: 150900 ASME classes: 150300
Temp: -425 to 1200F Temp: down to -420F (-252C)
(-254 to 650C)
NPS 318 (DN 80450) End-entry (two-piece), one- Butt-weld end or flanged types
switch valves piece/unibody, and three-piece Zero-leakage to API 598
Side-entry design offers easy
ASME classes 300900 (bolted) body styles resilient-seat standard
in-line maintenance
NPS 336 (DN 80900) Available in carbon and Zero-leakage testing to API 6D
Bi-directional shutoff
isolation valves stainless steel standard available on request
ASME classes 150900 Zero-leakage to API 598
Seats made of glass reinforced Bi-directional shutoff
Complete automation PTFE Metallic seal (Velflex
Fire tested to API 607/ISO 10497
packages including valve technology)
Available in reduced, regular, Available in lug or wafer per
interlocks through or full port designs Fire tested (API 607 rev. 4,
API 609, flanged per ISO 5752 or
PLC or DCS API 6FA and BS 6755 - Part II)
Butt weld, threaded, and ASME B16.10, and butt weld per
Two wire loop controls socket weld connections ASME B16.10 body patterns
and diagnostic packages
Available in carbon, stainless,
alloy, duplex, titanium, and
nickel alloy steels
Available for cryogenic,
NACE (sour gas), nuclear
service, and vacuum service
SIL 3 certified
Velan reserves the right to change this information without notice. 2015 Velan Inc. All rights reserved. 9
An extensive range of traps The original hermetically sealed Severe service control valves for Caged ball valves and DTP* trim
for steam and air lines bellows seal valves for absolute extreme temperature applications control valves for severe service
zero-leakage service and choke applications
Sizes: NPS 3/83 (DN 1080) Sizes: NPS 12 (DN 15300) Sizes: NPS 16 (DN 8400) Sizes: NPS 148 (DN 251200)
Temp: up to 1,100F (593C) ASME classes: 1501500 ASME classes: 1502500 ASME classes: 1504500
Pressure: up to 4000 psi (276 bar) Temp: down to -457F (-272C) API 6A classes: 200015000
Capacities: 160,000 lb/hr Cv: 0.01 to 1800
(72,575 kg/hr)
Available in Piping King Multi-ply stainless steel, Resilient stainless steel design KEY-C: Control ball valve
arrangements inconel and hastelloy Linear or equal percentage flow trunnion mounted with special
Cage unit design for easy bellows for long service life characteristics caged trim for noise reduction
and cavitation/flashing preven-
in-line repair Gate, globe (angle, needle, Top-entry for easy maintenance tion. Unidirectional, only one
Float bimetallic, hermetically and stop), and control valves
Excellent seat tightness metal seat on the up-stream
sealed, piston-operated, Available in carbon, stainless, part. Very high rangeability
space-heating, and alloy, and nickel alloy steels Cold box adaptation
DTP: Angle body construction
thermodynamic types Available for lethal, NACE Available in angle, straight or with multi-stage trim suitable
Optional blowdown valve, (sour gas), nuclear, and y-pattern patterns for high energy dissipation
temperature controller, vacuum service Anti-cavitation,and low dB and for high level of reliability,
thermometer, and vacuum design for critical applications excellent erosion resistance,
breaker available suitable for low noise
Vacuum jacketed on request
applications
Trim materials with highest
mechanical performances to
guarantee long trim life and low
maintenance cost
DPT choke valve for wellhead
mainly oil and gas applications
Full range of automation
capabilities see Velan ABV
actuator brochure at:
www.velanabv.com
10 Velan reserves the right to change this information without notice. 2015 Velan Inc. All rights reserved.
Velan reserves the right to change this information without notice. 2015 Velan Inc. All rights reserved. 11
BRO-FLB-03-15
Printed in Canada