Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
CONDITION
Some customers may comment on an intermittent illumination of the malfunction indicator lamp
(MIL)/check engine light.
CORRECTION
Use the procedure below to determine if the PCM has the incorrect alcohol content information.
1. Verify the actual measured percentage of alcohol content using the J-44175-A tester.
Refer to Alcohol in Fuel Diagnosis in SI.
If the actual alcohol is less than 15%, determine the "Fuel Alcohol Content" using the
Tech 2.
2. Install the Tech 2 and build the vehicle as a 2010 and select Powertrain.
3. Build the vehicle with an LE9 engine (even if it has the LE5 engine).
http://www1.shopkeypro.com/Print/Index?content=article&module=false&tab=false&term... 9/27/2014
Printer Friendly View Page 2 of 3
5. From this screen the "Fuel Alcohol Content" can be reset to zero by pressing
the lower right Tech 2 button. It will then display 0% when it's reset. Finally,
reprogram the PCM with the latest calibration. This will correct for the PCM
alcohol calculations.
http://www1.shopkeypro.com/Print/Index?content=article&module=false&tab=false&term... 9/27/2014
Printer Friendly View Page 3 of 3
NOTE:
WARRANTY INFORMATION
*This is a unique labor operation for bulletin use only. It will not be published in the Labor
Time Guide.
http://www1.shopkeypro.com/Print/Index?content=article&module=false&tab=false&term... 9/27/2014