Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Course Description:
This Module is an exploratory and introductory course which leads to Agricultural Crop Production National Certificate Level II (NC II). It covers four common
competencies that a Grade 7/Grade 8 Technology and Livelihood Education (TLE) student ought to possess: 1) using tools, equipment and paraphernalia; 2) performing
mensuration and calculation; 3) practicing Occupational Health and Safety (OHS) procedures; and 4) interpreting technical drawing and plans.
The preliminaries of this exploratory course include the following: 1) discussion on the relevance of the course, 2) explanation of key concepts relative to the course, and 3)
exploration of career opportunities.
K to 12 TLE Agri Fishery Arts Agri - Crop Production Curriculum Guide December 2013 *LO- Learning Outcomes Page 1 of 21
K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY AND LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
LESSON 1: USE OF FARM TOOLS AND EQUIPMENT AND MAINTENANCE (UT)
1. Farm tools The learner demonstrates an The learner uses farm tools and LO 1. Select and use farm tools TLE_AFAC7/8UT-0a-1
2. Defects and remedies understanding of concepts, equipment in agricultural crop 1.1. Identify farm tools according to
3. Farm tools safety underlying theories and production. use
4. Manual of farm equipment principles in the use of farm 1.2. Check farm tools for faults
and specification tools and equipment. 1.3. Use appropriate tools for the job
5. Parts and functions of requirement according to
equipment manufacturer's specifications
6. Pre-operation check-up and instructions
7. Safety practice during
operation of farm
equipment
8. Preventive maintenance LO 2. Select farm equipment TLE_AFAC7/8UT-0b-2
9. Regular maintenance of 2.1. Identify appropriate farm
equipment equipment
2.2. Follow the guidelines in the
instructional manual of farm
equipment
2.3. Conduct pre-operation check-up
in line with the manufacturers
manual
2.4. Identify faults in farm equipment
and facilities
2.5. Use farm equipment according
to their function
K to 12 TLE Agri Fishery Arts Agri - Crop Production Curriculum Guide December 2013 *LO- Learning Outcomes Page 2 of 21
K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY AND LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
LESSON 2: PERFORM ESTIMATION AND BASIC CALCULATION (MC)
1. Farm inputs The learner demonstrates an The learner accurately performs LO 1. Perform estimation TLE_AFAC7/8MC-0d-4
2. Labor requirement understanding of estimation estimation and basic calculation. 1.1. Identify job requirement from
3. Estimating farm inputs and and basic calculation. written and oral communications
labor requirements 1.2. Estimate the quantity of
4. Perform calculation materials and resources required
5. System of measurement to complete a work/ task
6. Units of measurement 1.3. Estimate time needed to
7. Conversion of units complete a work/activity
8. Fraction and decimals 1.4. Calculate the duration of work
9. Percentage and ratio completion
1.5. Follow procedures in reporting
to appropriate persons the
estimate of materials and
resources
LO 2. Perform basic workplace TLE_AFAC7/8MC-0e-5
calculation
2.1. Identify calculations to be done
according to the job requirement
2.2. Determine correct methods of
calculation
2.3. Ascertain systems and units of
measurement to be followed
2.4. Perform calculations needed to
complete a task using the four
basic mathematical operations
2.5. Employ different techniques in
checking accuracy of result
2.6. Use appropriate operations to
comply with the job requirement
K to 12 TLE Agri Fishery Arts Agri - Crop Production Curriculum Guide December 2013 *LO- Learning Outcomes Page 3 of 21
K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY AND LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
LESSON 3: INTERPRET PLANS AND DRAWINGS (ID)
1. Farm plans and layout The learner demonstrates an The learner interprets plans and LO 1. Layout garden plots TLE_AFAC7/8ID-0f-g-6
2. Planting system understanding of interpreting drawings relative to agricultural 1.1. Design farm plans and layouts
3. Farm layout plans and drawings. crop production. according to crop grown
4. Government plans 1.2. Follow strictly planting system
5. Crops arrangement and practices according to
6. Layout plan of irrigation approved cultural practices
system 1.3. Interpret irrigation system plan
7. Types of irrigation systems according to established
8. Essential features of a plan procedures
9. Different designs of 1.4. Differentiate designs of irrigation
irrigation system systems
K to 12 TLE Agri Fishery Arts Agri - Crop Production Curriculum Guide December 2013 *LO- Learning Outcomes Page 4 of 21
K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY AND LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
LO 2. Safely keep/dispose tools, TLE_AFAC7/8OS-0j-8
materials and outfit
2.1. Observe procedures in cleaning
used outfits in line with farm
procedure before storing
2.2. Follow the guidelines in labeling
unused materials to be stored
according to manufacturers
recommendation and farm
requirements.
2.3. Dispose waste materials
according to manufacturers,
government and farm
requirements
K to 12 TLE Agri Fishery Arts Agri - Crop Production Curriculum Guide December 2013 *LO- Learning Outcomes Page 5 of 21
K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY AND LIVELIHOOD EDUCATION
AGRI FISHERY ARTS AGRI CROP PRODUCTION
Grade 9 (Specialization)
Course Description:
This module covers the skills and knowledge required to support horticultural and nursery production under supervision. It requires the ability to prepare materials, tools
and equipment for horticultural production and nursery work practices; ensure hygiene and quality control; undertake routine production assistance work; handle materials
and equipment; and perform thorough cleanups upon completion of the work. Supporting horticultural and nursery production work requires knowledge of safe work
practices relating to (1) basic crop and nursery plant maintenance activities (2) basic stock control procedures (3) propagation and handling techniquesincluding
planting, maintaining, picking and packing, loading and unloading, and (4) using associated farm tools and equipment.
K to 12 TLE Agri Fishery Arts Agri - Crop Production Curriculum Guide December 2013 *LO- Learning Outcomes Page 6 of 21
K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY AND LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
Assessment
ENVIRONMENT AND MARKET (EM)
THE MARKET (The Town) The learner demonstrates an The learner independently identifies LO 1. Recognize and understand TLE_EM9-I0-1
1. Key concepts of the understanding of the market the products/services available and the market for agricultural crop
Market of agricultural crop the competitors within the production
2. Players in the Market production from the context agricultural crop production market 1.1. Identify the players/ competitors
(Competitors) of the town. from the context of the town. within the town
3. Products and services 1.2. Identify the different
available in the market products/services available in
the market
1.3. Enumerate the differences
between these products/
services
THE MARKET CUSTOMER The learner demonstrates an The learner independently identifies LO 2. Recognize the customers of TLE_EM9-II0-2
1. Key concepts in identifying understanding of the the customers in the agricultural the agricultural crop production
and understanding the customers of agricultural crop crop production market. market
Consumer production. 2.1. Identify the different customers
2. Consumer analysis of the market
through: 2.2. Identify the customers needs
2.1. observation and wants through consumer
2.2. interviews analysis
2.3. FGDs (Focused 2.3. Conduct observation exercises,
Group Discussions) interviews, FGDs and surveys
2.4. Surveys
THE MARKET - The learner demonstrates an The learner independently LO 3. Create new business ideas TLE_EM9-III0-3
GENERATING BUSINESS understanding of the generates business ideas using the using the various techniques and
IDEAS techniques of generating various techniques available. based on the analyses of the
1. Key concepts in generating business ideas. market for Agricultural Crop
business ideas Production.
2. Knowledge, skills, 3.1. Generate business ideas using
passions, and interests knowledge, skills, passions, and
3. New applications interests
4. Irritants 3.2. Generate business ideas using
new applications (finding new
use for existing
products/materials)
3.3. Generate business ideas from
K to 12 TLE Agri Fishery Arts Agri - Crop Production Curriculum Guide December 2013 *LO- Learning Outcomes Page 7 of 21
K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY AND LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
one's Irritants
THE MARKET - The learner demonstrates an The learner independently LO 4. Create new business ideas TLE_EM9-IV0-4
GENERATING BUSINESS understanding of the generates business ideas using the using the various techniques
IDEAS techniques of generating various techniques available. based on the analyses of the
1. Key concepts in generating business ideas. market for Agricultural Crop
business Ideas Production
2. Striking ideas (new 4.1. Generate business ideas based
concepts) on striking Ideas
3. Serendipity Walk 4.2. Generate business ideas using
the Serendipity Walk
QUARTER 1 and 2
LESSON 1. SUPPORT HORTICULTURAL WORK (HC) (Note: Research component should be included in the activities)
1. Types and selection of The learner demonstrates an The learner uses farm materials, LO 1. Prepare materials, tools and TLE_AFAC9HC-Ia-e-1
materials, tools, and understanding of concepts, tools, and equipment and applies equipment for horticultural
equipment underlying theories and occupational health and safety production work
2. Routine check-up of tools principles in the preparation practices in crop production. 1.1. Identify the required materials,
and equipment of farm materials, tools and tools and equipment according
3. Manual handling equipment and occasional to lists provided and/or
procedures and techniques health and safety operations teacher's/supervisors
4. Personal protective in crop production. instructions
equipment and 1.2. Check farm tools, materials and
occupational health and equipment for faults and defects
safety requirements based on manufacturer's lists
5. Common OHS hazards, and pre-operating procedures
risks and its control 1.3. Demonstrate the correct manual
handling procedures and
techniques when loading and
unloading materials to minimize
damage to the load and vehicle
1.4. Select and check the suitable
personal protective equipment
(PPE), as required by the job
1.5. Provide the work support in
accordance with OHS
requirements and the workplace
information
K to 12 TLE Agri Fishery Arts Agri - Crop Production Curriculum Guide December 2013 *LO- Learning Outcomes Page 8 of 21
K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY AND LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
1.6. Identify OHS hazards and file a
report based on OHS
requirements and company
reporting procedures
1. Common horticultural LO 2. Undertake horticultural TLE_AFAC9HC-If-j-2
production work production work as directed
2. Safe work practices 2.1. Follow and clarify instructions
3. Proper use of horticultural and directions based on
tools and equipment authority requirements and
4. Procedures for land workplace procedures
preparation, 2.2. Undertake work in a safe and
sowing/planting, crop environmentally-sound manner
maintenance, fertilization, according to enterprise
loading and unloading, guidelines
harvesting/picking, sorting 2.3. Interact with other staff and
and packing customers in a positive and
5. Planting, picking, packing, professional manner as specified
loading and transporting in the employee manual
techniques 2.4. Observe workplace practices,
6. Environmental aspects of handling and disposal of
horticultural production materials following enterprise
work policy and procedures
7. Interpersonal relationships 2.5. Report problems or difficulties in
and communication (oral completing work to required
and written) standards or timelines to
authority based on company
reporting procedures
1. Proper use/handling of LO 3. Handle materials and TLE_AFAC9HC-IIa-e-3
materials and equipment equipment
2. Storage practices and 3.1. Store waste material in a
principles for materials and designated area according to
equipment workplace procedure/OHS
3. Waste materials procedure
management 3.2. Handle and transport materials,
4. Occupational health and equipment and machinery
safety procedures according to enterprise
5. Routine maintenance of guidelines
K to 12 TLE Agri Fishery Arts Agri - Crop Production Curriculum Guide December 2013 *LO- Learning Outcomes Page 9 of 21
K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY AND LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
workplace 3.3. Maintain a clean and safe work
site while working in
accordance with OHS
procedures
1. Procedures for storage of LO 4. Cleanup on completion of TLE_AFAC9HC-IIf-j-4
excess materials work
2. Procedures for disposal of 4.1. Return materials to store or
waste materials dispose of according to
3. Routine cleaning, company standard procedures
maintenance and storage
4.2. Clean, maintain and store tools
of tools and equipment
and equipment according to
4. Report preparation of work
manufacturers specifications
outcomes
4.3. Report work outcomes to the
authority following established
reporting formats
Quarter 3 and 4
LESSON 2: SUPPORT NURSERY WORK (NW) (Note: Research component should be included in the activities)
1. Types and selection of The learner demonstrates an The learner uses farm materials, LO 1. Prepare materials, tools TLE_AFAC9NW-IIIa-e-
materials, tools, and understanding of concepts, tools and equipment for nursery and equipment for nursery work 1
equipment appropriate to underlying theories and work. 1.1. Identify the required materials,
nursery work principles in nursery work. tools and equipment based on
2. Routine check-up of tools lists provided and/or authoritys
and equipment instructions
3. Manual handling 1.2. Check the materials, tools and
procedures and techniques equipment based on
4. Personal protective manufacturers lists and pre-
equipment and operating procedures and
occupational health and report those with insufficient or
safety requirements faulty items to the authority
5. Common OHS hazards and 1.3. Demonstrate correct manual
its control handling procedures and
techniques when loading and
unloading materials to minimize
damage to the load and vehicle
1.4. Select and check the suitable
personal protective equipment
K to 12 TLE Agri Fishery Arts Agri - Crop Production Curriculum Guide December 2013 *LO- Learning Outcomes Page 10 of 21
K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY AND LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
(PPE), as required by the job
1.5. Provide nursery support
according to OHS requirements
and workplace information
1.6. Identify and report OHS
hazards to the authority based
on OHS requirements and
company reporting procedures
1. Common nursery work LO 2. Undertake nursery work as TLE_AFAC9NW-IIIf-j-2
2. Safe work practices directed
3. Proper use of nursery tools 2.1. Follow and clarify instructions
and equipment and directions based on
4. Nursery hygiene and authority requirements and
quality control workplace procedures
5. Nursery plant maintenance 2.2. Undertake nursery work in a
activities safe, appropriate and
6. Propagation techniques environmentally-sound manner
7. Environmental aspects of according to nursery guidelines
nursery work 2.3. Interact with other staff and
8. OHS legislative customers in a positive and
requirements and codes of professional manner as
practice specified in the employee
9. Interpersonal relationships manual
and communication (oral 2.4. Observe good workplace
and written) practice in handling and
disposing of materials following
nursery policy, procedures and
OHS requirements
2.5. Report problems or difficulties
in completing work to required
standards or timelines to
authority, based on company
reporting procedures
1. Basic stock control LO 3. Store and stockpile TLE_AFAC9NW-IVa-e-3
procedures materials
2. Recycling/composting 3.1. Store plant debris and waste
practices and procedures material produced during
K to 12 TLE Agri Fishery Arts Agri - Crop Production Curriculum Guide December 2013 *LO- Learning Outcomes Page 11 of 21
K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY AND LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
3. Proper stockpiling of nursery activities according to
surplus materials nursery /OHS procedure
4. Storage practices and 3.2. Prepare and process plant
principles for materials debris and waste materials in
5. Waste materials an appropriate and safe manner
management according to accepted
6. Routine maintenance of recycling/composting practices
workplace and procedures
3.3. Stockpile all surplus materials
according to company
disposition guidelines
3.4. Maintain a clean and safe work
site while completing nursery
activities following routine
maintenance procedures
1. OHS Requirements LO 4. Cleanup on completion of TLE_AFAC9NW-IVf-j-4
2. Procedures for storage of nursery work
plants and materials 4.1. Store plants and materials
3. Routine cleaning, according to company storage
maintenance and storage guidelines and OHS
of tools and equipment requirements
4. Report preparation of work 4.2. Clean, maintain and store tools
outcomes and equipment according to
manufacturers specifications
4.3. Report work outcome to the
supervisor following established
reporting formats
K to 12 TLE Agri Fishery Arts Agri - Crop Production Curriculum Guide December 2013 *LO- Learning Outcomes Page 12 of 21
K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY AND LIVELIHOOD EDUCATION
AGRI FISHERY ARTS AGRI CROP PRODUCTION
Grade 10 (Specialization)
Course Description: Prerequisite: Grade 9 Agri-Crop Production
This module covers the skills and knowledge required to support agronomic cropping work under supervision. It requires the ability to prepare materials, tools and
equipment for cropping work; undertake cropping activities; and handle materials and equipment. Supporting agronomic cropping work requires knowledge of safe work
practices, cropping practices and related tools and equipment.
This also covers the skills and knowledge required to support the installation, operation and maintenance of watering and drainage systems under direct supervision.
It requires the ability to prepare materials, tools and equipment for irrigation work, undertake irrigation activities, handle materials and equipment, and perform thorough
cleanups upon completion of the work. Supporting irrigation work requires knowledge of safe work practices, irrigation work techniques, irrigation tools and equipment, and
repair and maintenance of irrigation components and systems.
K to 12 TLE Agri Fishery Arts Agri - Crop Production Curriculum Guide December 2013 *LO- Learning Outcomes Page 14 of 21
K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY AND LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
idea
3.3. Apply the criteria/steps in order
to select a viable business idea
3.4. Identify a business idea based on
the criteria/steps provided.
THE MARKET - BRANDING The learner demonstrates an The learner independently generates LO 4. Develop a brand for the TLE_EM10-IV0-4
1. Key concepts of understanding of branding and a brand for their business idea. product
Branding develops a brand for their 4.1. Identify the benefits of having a
business idea. good brand
4.2. Enumerate recognizable brands
in the town/province
4.3. Enumerate the criteria for
developing a brand
4.4. Generate a brand that is clear
and follows the techniques of
generating a brand
QUARTER 1 and 2
LESSON 1: SUPPORT CROP WORK (Note: Research component should be included in the activities)
1. Types and selection of The learner demonstrates an The learner prepares farm tools and LO 1. Prepare materials, tools TLE_AFAC10CW-Ia-
materials, tools, and understanding of concepts, equipment for agronomic crop and equipment for agronomic e-1
equipment appropriate to underlying theories and production based on required task. crop work
agronomic production principles in the preparation of 1.1. Identify the required materials,
2. Routine check-up of tools materials, tools and equipment in tools and equipment according to
and equipment agronomic crop production. lists provided and/or authority
3. Manual handling instructions.
procedures and 1.2. Check materials, tools and
techniques equipment for sufficient quantity,
4. Personal protective faults/defects based on
equipment and manufacturers lists and pre-
occupational health and operating procedures
safety requirements 1.3. Demonstrate correct manual
5. Common OHS hazards handling procedures and
and its control techniques when loading and
unloading materials to minimize
damage to the load to the
K to 12 TLE Agri Fishery Arts Agri - Crop Production Curriculum Guide December 2013 *LO- Learning Outcomes Page 15 of 21
K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY AND LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
materials, tools and equipment
1.4. Select and check suitable
personal protective equipment
(PPE) prior to use according to
job requirements
1.5. Provide cropping support
according to OHS requirements
and workplace information
1.6. Identify OHS hazards and report
to the teacher/ supervisor based
on OHS requirements and
company reporting procedures
1. Common agronomic crop LO 2. Undertake agronomic crop TLE_AFAC10CW-If-
work work as directed j-2
2. Safe work practices in 2.1. Follow and clarify instructions
agronomic operation and directions based on
3. Proper use of farm tools supervisors requirements and
and equipment workplace procedures
4. Cropping practices 2.2. Undertake cropping work in a
5. Procedures for land safe and environmentally-
preparation, seeding, responsible manner according
crop maintenance, to enterprise guidelines
fertilization, loading and 2.3. Interact with other staff and
unloading, customers in a positive and
harvesting/picking, professional manner as
baling, raking, sorting specified in the employee
and packing of agronomic manual
crops 2.4. Observe good workplace
6. Planting, picking, packing, practice in handling and
loading and transporting disposing of materials following
techniques for agronomic enterprise policy and
crops procedures
7. Environmental aspects of 2.5. Report problems or difficulties in
agronomic crop work completing work to required
8. Interpersonal standards or timelines to
relationships and authority, based on company
communication (oral and reporting procedures
K to 12 TLE Agri Fishery Arts Agri - Crop Production Curriculum Guide December 2013 *LO- Learning Outcomes Page 16 of 21
K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY AND LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
written)
1. Proper use/handling of LO 3. Handle materials and TLE_AFAC10CW-
materials and equipment equipment IIa-e-3
2. Storage practices and 3.1. Store/dispose of waste material
principles for materials and debris in a designated area
and equipment according to workplace
3. Waste materials procedure/OHS procedure
management 3.2. Handle and transport materials,
4. Routine maintenance of equipment and machinery
sheds and other according to enterprise
workplaces guidelines
5. Repair and maintenance 3.3. Maintain a clean and safe work
of structures site while undertaking irrigation
6. Occupational health and activities in accordance with
safety procedures OHS procedures
1. Procedures for storage of LO 4. Cleanup on completion of TLE_AFAC10CW-
excess materials cropping work IIf-j-4
2. Procedures for disposal of 4.1. Return, storage cabin or dispose
waste materials of materials according to
3. Routine cleaning, company standard procedures
maintenance and storage 4.2. Clean, maintain and store tools
of tools and equipment and equipment according to
4. Report preparation of manufacturers specifications
work outcomes 4.3. Report work outcomes to the
authority following established
reporting formats
QUARTER 3 and 4
LESSON 2: SUPPORT IRRIGATION WORKS (IW) (Note: Research component should be included in the activities)
1. Types and selection of The learner demonstrates an The learner practices safety LO 1. Prepare materials, tools TLE_AFAC10IW-
materials, tools, and understanding of safety precautions in preparation of and equipment for irrigation IIIa-e-1
equipment precautions in preparation of materials and handling of irrigation work.
2. Routine check-up of tools materials and handling of work for agronomic crop production 1.1. Identify required materials,
and equipment irrigation work. as stipulated in the manual. tools and equipment according
3. Different irrigation to lists provided and/or
systems and components authoritys instructions
4. Personal protective 1.2. Check materials, tools and
equipment and equipment for insufficient
K to 12 TLE Agri Fishery Arts Agri - Crop Production Curriculum Guide December 2013 *LO- Learning Outcomes Page 17 of 21
K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY AND LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
occupational health and quantity or faults/defects and
safety requirements report to the authority based on
5. OHS hazards/ general OH manufacturers lists and pre-
& S principles and operating procedures
legislation 1.3. Demonstrate correct manual
6. Accident/hazard reporting handling and techniques used
procedures when loading and unloading
materials to minimize damage
to the materials, tools and
equipment
1.4. Follow material and equipment
handling procedures
1.5. Select and check suitable
personal protective equipment
(PPE) prior to use and according
to job requirements
1.6. Provide irrigation support
according to OHS requirements
and according to workplace
information
1.7. Identify and report to the
supervisor the OHS hazards
based on OHS requirements and
company reporting procedures
1. Safe work practices LO 2. Undertake irrigation work TLE_AFAC10IW-
2. Basic irrigation principles as directed IIIf-j-2
and practices 2.1. Follow and clarify instructions
3. Basic construction and directions based on
techniques authoritys requirements and
4. Irrigation tools and workplace procedures
equipment 2.2. Undertake irrigation work in a
5. Installation of irrigation safe and environmentally
and/or drainage pipes appropriate manner according
6. Environmental aspects of to enterprise guidelines
irrigation work 2.3. Carry out in a positive and
7. Repair and maintenance professional manner the
of irrigation components interactions with other staff and
K to 12 TLE Agri Fishery Arts Agri - Crop Production Curriculum Guide December 2013 *LO- Learning Outcomes Page 18 of 21
K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY AND LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
and systems customers as specified in the
8. Interpersonal employee manual
relationships and 2.4. Observe handling and disposal
communication (oral and practices of materials for
written) irrigation work, following
engineering and enterprise
policy and procedures
2.5. Report problems or difficulties in
completing work to required
standards or timelines to
authority based on company
reporting procedures
1. Proper use/handling of LO 3. Handle materials and TLE_AFAC10IW-
materials and equipment equipment IVa-e-3
2. Storage practices for 3.1. Store waste material and debris
materials and equipment in the designated area
3. Waste materials storage according to workplace
and disposition procedure/OHS procedure
4. Routine maintenance of 3.2. Handle and transport materials,
irrigation and/or drainage equipment and machinery
systems and components according to enterprise
5. Repair, maintenance, and guidelines
storage of infrastructures, 3.3. Maintain a clean and safe work
materials, tools and site while undertaking irrigation
equipment activities in accordance with
OHS procedures
1. Procedures for storage of LO 4. Cleanup on completion of TLE_AFAC10IW-
excess materials irrigation activities IVf-j-4
2. Procedures for disposal of 4.1. Return to storage cabin or
waste materials dispose the materials according
3. Routine cleaning, to company standard
maintenance and storage procedures and supervisors
of tools and equipment instructions
4. Environmental 4.2. Clean, maintain and store the
requirements relative to tools and equipment according
irrigation to manufacturers specifications
5. Report preparation of and supervisors instructions
K to 12 TLE Agri Fishery Arts Agri - Crop Production Curriculum Guide December 2013 *LO- Learning Outcomes Page 19 of 21
K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY AND LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
work outcomes 4.3. Make the site clean according to
6. Accident/hazard reporting authorities' instructions and
procedures good environmental practices
4.4. Report work outcomes to the
authority following established
reporting formats
K to 12 TLE Agri Fishery Arts Agri - Crop Production Curriculum Guide December 2013 *LO- Learning Outcomes Page 20 of 21
K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY AND LIVELIHOOD EDUCATION
Sample: TLE_AFAC9HC-IIa-e-3
Learning Area and Technology and Livelihood Personal Entrepreneurial Skills PECS
Strand/ Subject or Education_Agri-Fishery
Specialization Agri-Crop Production
First Entry TLE_AFAC9HC Environment and Marketing EM
Grade Level Grade 9 Use and Maintain Farm Tools and Equipment UT
K to 12 TLE Agri Fishery Arts Agri - Crop Production Curriculum Guide December 2013 *LO- Learning Outcomes Page 21 of 21