Sei sulla pagina 1di 5

Huawei Ascend Y300 firmware upgrade

Huawei Ascend Y300 U8833 firmware upgrade using SD


card
Force upgarde mode
What you need to upgrade your Huawei U8833 Y300 Android phone's
software/firmware is:
- Your Huawei Y300 phone with charged battery
- a microSD card with at least 2 GB
- the latest stock firmware from Huawei's official website

This version can be upgraded, pls check it before you upgrade.

Y300-0100 V100R001C00B189

Note: the force upgrade method can be used if your phone is not accessible, can't boot
up or cannot be switced on.

1. Make sure you have backed up all your important data. All files, messages, images,
videos, contacts etc.

2. Download the official update software from Huawei's website. (Go to Home / Support
/ Downloads, enter "y300 firmware" in the search box.
Download the .zip file.
3. Unpack it on your Desktop. Copy the dload folder to your SD card's root directory.
4. Turn off your Huawei y300. (Make sure your battery has enough power. Charge it if
necessary.) Insert the memory card.
5. Press both Volume keys (VOL UP and DOWN) and then the power key until the
software upgrade progress bar displays. Then you can release all keys.
6. Wait until the progress bar finishes and the phone restart.
7. Check firmware version in Settings > About phone / build number

Note: If you haven't inserted the microSD card in the phone's memory slot, you will get a
blank pink screen. To exit, simply press power to power off the phone.
Huawei Ascend Y300 U8833 normal firmware upgrade
method from menu
If your phone can boot up and is responding to screen input, you can use the normal
firmware / software upgrade method from menu settings.

1. Make sure you have backed up all your important data. All files, messages, images,
videos, contacts etc.2. Download the official update software from Huawei's website.
(Go to Home / Support / Downloads, enter "y300 firmware" in the search box.
Download the .zip file.
3. Unpack it on your Desktop. Copy the dload folder to your SD card's root directory.
4. Insert the memory card in the phone.
5. Turn on the phone.
6. Go to Settings > Storage > Software Upgrade > SD card Upgrade > Tap Confirm >
Tap Upgrade.
7. Wait until the progress bar finishes and the phone restart.
8. Check firmware version in Settings > About phone / build number
Bootloader error RGB boot screen no boot red green blue screen

General advice: Before you buy a new cell phone or new tablet, please try the following
procedure to repair your device in a software way. First charge your battery, backup
your important data if possible and in most cases take out SIM and SD card before
doing factory reset. It is impossible to recover your data after doing a hard reset, so
online backup is always important. For all of your data, a backup should be done on an
external device, hard drive, raid system or media. With or without insurance, if your cell
phone lost, damaged or stolen at least your invaluable data is backed up in a safe
place. If you are about to sell your phone and you want to wipe your personal data, or if
your phone affected with virus you have to do a hard reset. In some cases, you can
delete the forgotten password or lock pattern from your device as well. All information is
for devices with stock based ROMs. If you are using rooted device, always back up your
EFS folder first, containing your IMEI info, etc.! Please also note, that a hard reset
operation will not unlock your mobile phone's SIM lock or network lock, but it will remove
the unlock pattern, remove the user password or PIN password (NOT the SIM card's 4
digit PIN code). Also note that the firmware version will not be affected in any way, it will
not be downgraded, it will remain the same you are using and if you have rooted your
device, root privileges remain also unaffected.

Potrebbero piacerti anche