Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
kr
SEONGHWA SUPPORT
Inspiration beyond Integration
Factory 1
Factory 2
Factory 3
Head Office
SEONGHWA
SUPPORTS
Contents
Technical Specification
1.0 General 6
2.0 Hanger and Support Design 11
3.0 Load Group 13
4.0 Standardized Components 13
5.0 Applicable Codes and Materials 14
6.0 Installation, Handling and Maintenance 15
7.0 Seonghwa Engineering System for Supports(SHES, P-SHES and SP-SHES) 17
Dynamic Elements
1.0 Rear Bracket 82
2.0 Rigid Strut 83
3.0 Limit Stop 84
4.0 Snubber and Snubber Extension 86
5.0 Dynamic Clamp 95
6.0 Sway Brace 126
Pipe Clamps
1.0 Type Designation 134
2.0 Hanging Type Clamp 136
3.0 Supporting Type Clamp 146
4.0 Supporting Type Clamp with Extension Pipe 160
5.0 Riser Type Clamp 164
Threaded Connecting Elements
1.0 Eye Nut(EN) 170
2.0 Clevis with Pin(CP) 170
3.0 Turnbuckle(TB) 171
4.0 Rod Coupling(RC) 171
5.0 Hex Nut(HN) 172
6.0 Tie Rod(R/L) (TRL) 172
7.0 Tie Rod(R/R) (TRR) 173
8.0 Threaded Stud(THS) 173
9.0 Threaded Rod(THR) 174
Structural Attachments
1.0 Weld on Eye Plate(WP) 176
2.0 Spherical Washer Plate(SWP) 176
3.0 Weld on Lug Plate(WLX) 177
4.0 Weld Beam Attachment(BAD) 178
5.0 Welding Rod Attachment(BAU) 178
6.0 Weld on Eye Plate with Anchor Plate(WPA) 179
7.0 Universal Clamp(UC) 179
Miscellaneous Items
1.0 Elbow Pipe Lug(LPE) 194
2.0 Horizontal Pipe Lug(LPH) 194
3.0 Trapeze(TR) 195
4.0 Adjustable Support(AS) 195
5.0 Stiffener Plate 196
Technical Data
1.0 Pipe Data 198
2.0 H-Beam Data 201
3.0 Channel Data 203
4.0 Angle Data 204
5.0 Square Tube Data 205
6.0 Rectangular Tube Data 206
7.0 Determination of Stanchion/Dummy Pipe Length 208
Technical
Specification
1.0 General
5 GR - 1
Technical Specification
1.0 General
It is impossible to overestimate the importance of piping systems in the plants, of which activity is the same as vein in the human bodies.
Nutritions required for the human body and waste products generated in the body are conveyed and exhausted by way of veins, re-
spectively.
On the other hand, steam/water, fuel/air, and flue gas are circulated by way of piping systems.
Hanger and support for a piping system should be placed in order to sustain the load of the piping system, which can prevent this
system from failure due to the internal force(stress).
1) The pipes between terminal points become longer as the larger plants are constructed, which increase the number of
hangers and displacements at the hanging points of the given system.
2) Thermal movements at the points increase due to the high pressure and temperature, which require the hangers to
perfectly permit thermal movements not to restrain the piping flexibility.
3) Fatigue and creep phenomena due to variable load and high temperature operations can degrade the function of the
spring coil.
Generally speaking, constant, variable hanger and rigid hanger are used at the hanging point where the thermal movements of the
piping are large(above 30mm), medium(0.25mm ~ 30mm) and small(below 0.25mm), respectively.
TS - 1 6
Table 1 Main Products and Their Functions
Thermal Movement
Load Completely Absorbed Partially Absorbed Completely Prohibited
Static Constant Hanger Variable Hanger Rigid Hanger
Dynamic Snubber Damper Rigid Strut
The additional stress can occur if the thermal movements are restricted due to using the rigid, the variable, and maladjusted constant
hanger. This stress is sometimes called the secondary stress or the thermal stress.
The piping analyzers should, therefore, pay attention to selection of the hanger types adequately considering the piping flexibility.
The hanger which sustain the dynamic load also can be classified into snubbers, dampers and rigid struts according to permissibility
of the thermal movements.
Special care should be taken of buckling in designing these products because the dynamic load implies both the positive and negative
directional forces.
Table 2 shows the sub-products of hangers and their functions.
Product Function
Clamp Enclosing the pipe
Rod Compensating for the elevation difference
Connecting Product Connecting the rod with the rod, the main product, or the clamp
Structural Attachment Welded connecting hanger system with steel structure or building
Here the clamp encloses the pipe according to its shape. The connecting products are mainly manufactured by forging, which connect
the rod with the rod, the main product, or the clamp. The structural attachments are welded on the steel structure to transfer the pipe
load to it.
The rod is a kind of the rigid hanger which can make up for the elevation difference between the center of the pipe and the bottom of
steel structure.
Especially, to restrain movements of piping system adequately, the following devices can be sometimes used(so-called "restraint");
1) Anchor restrains the translational and rotational displacements of all the directions of the piping system
2) Guide restrains the movement in lateral directions of the piping system
3) Line stop restrains the movement in longitudinal directions of the piping system
4) One way restrains the movement in predetermined directions of the piping system
5) Limit stop is a kind of restraint, permitting the limited movement in the predetermined direction
If the spacing between two hanging points is too far, the following problems shall occur;
TS - 2
7 TS - 2
Technical Specification
Consequently, the spacing between the hanging points should, therefore, be limited as shown in Table 3.
Table 3 Maximum Horizontal Pipe Hanger and Support Spacing(See MSS SP-58, Table 4)
1 25 7 2.1 9 2.7
2 50 10 3.0 13 4.0
3 80 12 3.7 15 4.6
Fig. 1 illustrates the importance of hangers adequately- the effect of hangers on the piping system.
In this figure, the blue line indicates the designed layout of the piping system, so-called the natural state.
Natural state means that the hanging loads at each nodal point are not different from the loads that satisfy the force equilibrium in this
system.
The red line does, however, indicate that the piping system is deformed inadequately due to the deviated load at nodal point from the
designed load by 20%. This deviation can result from the design error, maladjusted hanger, or exhausted life of the spring.
TS - 3
TS - 3 8
Designed Actual
Node Force Moment Force Moment
(kN) (kN-m) (kN) (kN-m)
-1.2 -5.0
X 0.1 1.4 (12.0) (3.6)
-0.9 40.3
10 Y 0.1 10.6 (9.0) (3.8)
-12.5 -1.2
Z -6.9 0.1 (1.8) (12.0)
1.2 -8.2
X -0.1 1.3 (12.0) (6.3)
0.9 34.9
100 Y -0.1 16.4 (9.0) (2.1)
-12 3.9
Z -8.3 -0.4 (1.4) (9.8)
Values in brackets ( ) are the rations of actual to design loads.
100
50
15
13
15
13
Z
Y X 9
96.96mm
Z
Y X Designed
9
Deviation 20%
96.96mm
Designed
Deviation 20% -
10
-
-
Fig. 1 Effect of Hangers on the Piping System
-
As shown in this table, forces and moments at the anchor points due to the load deviation are much higher than those for the natural
1
state, which results in concentration of the unbalanced forces and moments on the anchor points. -1
These concentrated forces and moments will promote discontinuous regions to be failed quickly.
TS - 4
9 TS - 4
Technical Specification
X
Another example(Fig.2) shows that it is very important for the hanger to sustain the exact load.
When the uniform load() acts on the pipe, Fig. 2.1 shows the reaction force at support points and moment profile along pipe at the equilibrium state.
Then the maximum bending moment for this state is 0.1 2.
However, when reaction forces at the middle point are reduced by 10%, the maximum bending moment for this state is 0.125 2 ,
increased by 25%(Refer to Fig.2.2).
When reaction forces at the middle point are increased by approximately 10%, the maximum bending moment for this state is 0.2 2 ,
increased by 100%(Refer to Fig.2.3).
This implies that the strong or weak support is not recommendable, but it is important that the support carry the exact load.
In result, the hanger should carry the exact load with permitting the predetermined the pipe displacement.
TS - 5
TS - 5 10
2.0 Hanger and Support Design
Prior to designing the hanger and support, the piping analysis should be performed. Followings specify the design procedure for the
hanger and support.
For the complex piping system, thermal movement should be restrained adequately to prevent the pipe from excessive deformation
using restraint.
Piping stress analysis will be performed in accordance with the applicable code using piping package program.
1) Piping Flexibility
The piping layout will be acceptable, if thermal load were satisfactory.
2) Sustained Load Analysis
Location or number of sustained load duty hangers will be acceptable, if sustained load analysis were satisfactory.
3) Combined Load Analysis(Sustained Load + Thermal Load)
The types and sizes for sustained load duty hangers will be acceptable, if combined load analysis were satisfactory.
4) Occasional Load Analysis
A
dditional occasional load analysis should be followed to check wind load, seismic load, and/or other dynamic load
such as flow induced dynamic load like steam trip, hammering and so on. The dynamic load duty components selected
will be acceptable, if occasional load analysis were satisfactory.
TS - 6
11 TS - 6
Technical Specification
2.4 Making Semi-Engineered Drawings for Hanger and Support
Considering surrounding steel structures and equipments, semi-engineered drawings will prepared. The relative vertical distance(i.e.
distance between pipe center and bottom of structure or between pipe center and ground level) and the relative horizontal position of
hanger and support should be determined in this stage. Undoubtedly, interference check with other equipments should be considered.
For complex piping arrangements, special 3-D Package can be useful to check the interference.
TS - 7 12
3.0 Load Group
Beam attachments, hanger rods, forged items and others which are not within the thermal insulation and are therefore not exposed to
the pipe temperature are simply selected by referring to the load capacity for each load group. Load capacities for standard sizes are
given for static load duty as Table 4;
M-Size Capacity for Static Load(kN) M-Size Capacity for Static Load(kN)
M12 5.0 M48 100.0
Product Product Group Type Type Group Product Product Group Type Type Group
Group Designation Group Designation Group Designation Group Designation
H Horizontal Type THR Threaded Rod N/A N/A
CH Constant Hanger B Bottom Type
V Vertical Type WP Weld on Eye Plate N/A N/A
HSE/SNP Snubber Extension N/A N/A PHG Pipe Guide(Horizontal) N/A N/A
RS Rigid Strut N/A N/A GUE Guide with Extension N/A N/A
BSN Rear Bracket N/A N/A GUS Guide without Extension N/A N/A
CP Clevis with Pin N/A N/A LPE Elbow Pipe Lug N/A N/A
TRL, TRR Tie Rod(R/L, R/R) N/A N/A AS Adjustable Support N/A N/A
13 TS - 8
Technical Specification
5.0 Applicable Codes and Materials
5.2 Materials
Materials are exclusively used which correspond to KS/JIS and ASTM/ASME material requirement. As a matter of principle, guaranteed
materials are used for components as tabulated in Table 7.
Temperature()
Material
349 399 450 500 530 560 600 650
For Components
A36
A387 Gr.11
A387 Gr.22
A387 Gr.91
For Connection Components
A668 C / A36 / S20C
A193 B7
A193 B8
A193 B16
TS - 9
TS - 9 14
6.0 Installation, Handling and Maintenance
Additionally, following check points for each assembly should be carefully considered;
1) Adjust the rods to maintain design elevation of the pipe line and tension in the rods.
2) Check the thread engagement and tighten the nuts for safety.
3) Check the gap for restraints(limit stop) according to the assembly drawings.
4) Check the hanger offset and angularity according to the assembly drawings.
TS - 10
15 TS - 10
Technical Specification
6.3.2 Functional Product
Functional products, variable hanger/support and constant hanger/support are supplied cold-set at the shop with the blocking
devices.
In addition to the points for non functional products, following attention should be paid for making these products function
perfect during plant operation;
1) Select a piping system, i.e., to install the functional products, consider the hangers in one system as a whole.
2) Turn the turnbuckle or adjust load bolt in order to meet the design elevation of the pipe line and maintain
the tension in the hanger rod until blocking devices of all the hangers in one system can be removed
easily.
Caution :
- Check the sight hole of turnbuckle or adjust load bolt in this step.
3) If the blocking devices are not removed easily, adjust the load of constant hanger/support.
Caution :
- It is better to adjust the other adjacent constant hangers in case of excessive load adjustment.
- Load data should be reviewed by the piping analyzer when load should be adjusted.
Repeat step 2) and 3) for all the constant hangers.
4) Remove the travel stops after hydrostatic test and insulation work and place the blocking devices with
screw or wires for the future use.
Caution :
- Do not remove the blocking devices by force.
TS - 11
TS - 11 16
7.0 Seonghwa Engineering System for Supports(SHES, P-SHES and SP-SHES)
7.1 SHES
It is very hard to select the components exactly and adequately because there are too many components and assembly configurations are various.
In order to select the standard components by using a software program, all components are grouped as below;
Using data base grouping over 3,000 sets of standard components, engineering program called as SHES(Seonghwa Engineering System)
was developed.
SHES can generate part list and assembly drawings automatically, which will be useful for design, procurement control and manufacturing control.
With SHES, the support need not be configurated manually nor drawn up at great expense in time and cost. What it otherwise takes so a
lot of time to produce can be done in minutes electronically only by input data.
Fig. 3, 4, and 5 show the preprocess(Input Data Sheet) of SHES, part list and assembly drawing generated by SHES, respectively.
For more detailed information, refer to separate SHES software and User Manual in Home Page(http://www.seonghwa.co.kr)
TS - 12
17 TS - 12
Technical Specification
TS - 13 18
206 207 208 209 210 211 212
19 TS - 14
Technical Specification
504
TS - 15 20
Fig. 3 Preprocess of SHES
21 TS - 16
Technical Specification
7.2 P-SHES
For most plants, the building structures, the piping systems and equipments have been basically modeled via 3D CAD program before starting
support design. P-SHES will be utilized for modeling the Seonghwas standardized supports on PDMS with true scale(See Fig. 6)
In addition to support 3D model itself, following design work can be performed;
For more detailed information, refer to separate P-SHES software and User Manual in Home Page (http://www.seonghwa.co.kr)
Fig. 6 Model of Seonghwas Standardized Support on PDMS Fig. 7 Model of Secondary Steels
TS - 17 22
Hard Clash List : Total 9 Points
-. /F6G6-1
-. BEND 2 of BRANCH /CABLE_TRAY/M3/B2
-. HELEMENT 5 of HANGER 1 of RESTRAINT /HS-001/RE
-. HELEMENT 6 of HANGER 1 of RESTRAINT /HS-001/RE
-. ileave tube of ELBOW 2 of BRANCH /150-A-3-B1
-. ileave tube of ELBOW 4 of BRANCH /100-C-13-B1
-. REDUCER 1 of BRANCH /CABLE_TRAY/M3/B2
-. SCLAMP 1 of HANGER 1 of RESTRAINT /HS-001/RE
-. SCTN 1 of FRMWORK /HS-002/S-1
23 TS - 18
Technical Specification
TS - 17
TS - 19 24 TS - 16
7.3 SP-SHES
Similar to P-SHES, SP-SHES is one of SEONGHWA support modeling program on S3D and can be designed by standard support type and de-
signed support type. SP-SHES is able to generate SEONGHWA standard support items(See Fig.12) and extract BOM(See Fig. 13) and 2D basic
support drawing(See Fig. 14).
For more detailed information, refer to separate SP-SHES software and User Manual in Home Page(http://www.seonghwa.co.kr)
25 TS - 20
Technical Specification
TS - 21 26
Constant
Hangers and Supports
1.0 Operational Principle
5.0 Dimensions
27
Constant Hangers and Supports
Constant Hanger and Support will be used where the thermal movement of the piping system is large. This can release the secondary
stress induced from restraining the thermal movements of the piping system. Constant hanger and support should be used when the vari-
able hanger and support can not satisfy the variability requirement specified in Code/Standard(normally, maximum 25%) or Customers
Specification.
This section explains the operational principle of constant hanger assembled with coil spring and link mechanism.
Constant hanger is mechanism which guarantee constancy of the load regardless of travel, and the operational principle should be fully
understood in order to select and handle this product.
To begin with, consider the operational principle without regard to weight of hanger
In case that the structure is connected on the top P of Frame and load is acted on Eyebolt installed in point A of Rotated Arm
(Refer to Fig. 1.1).
Fig. 1.2 and 1.3 are schematic diagrams to explain operational principle for minimum travel and maximum one, respectively.
(1)
P
Moment(Ms) about rotational center O by compressible spring load,
P is given by 1
2
(2)
3
C B
P
M s = Px OEwhere
= kOE
is the displacement of spring coil and k is spring constant. c A
b a
In the triangular OBC, 4
O
(3)
W
Fig. 1. 1
E B
(4) C
d
D
P
c b
a
F
For moment equilibrium about the rotational center O, O
(5)
CH - 1 28
In eq.(5), will be always equal to regardless of travel, on the condition that OA, OB and OC were positioned so that in Fig. 1.2
(6)
P C
d
E
c B
b
The dimension is always equal to displacement of spring coi l for O
a
all travel range, if BC=d at the maximum displacement.
D F
Accordingly, eq.(6) can be simplified as eq.(7);
W
(7)
Fig. 1. 3
Where dimensions a, b and c are arm lengths of OA, OB and OC, respec-
1 2
tively and always constant values.
X
Additionally, spring constant k is constant value, and theoretically eq.(7) is
P
constant for all travel range.
1
Actually, when the hanger is suspended on the rod(Refer to Fig. 1.4), the 2
A
weight of the hanger and its center of gravity should be considered. G O
In Fig. 1.4, Point G and Weight Q indicate the center of gravity of the hanger
and its weight, respectively. Z Y
(9)
where
CH - 2
29 CH - 2
Constant Hangers and Supports
2.0 Type Designation and Usage
CH H - 28 - C1 - XX0
Maximum Travel(mm)
. 37,638(kN-mm)
Easy to install . 289.5(kN) at 130(mm)
A1
Rod directly connected . 94.1(kN) at 400(mm)
. 64,135(kN-mm)
Directly connected to structure with eye
B1 . 320.7(kN) at 200(mm)
plate
. 160.3(kN) at 400(mm)
. 64,135(kN-mm)
Directly connected to structure with eye
B1A . 320.7(kN) at 200(mm)
plate
. 160.3(kN) at 400(mm)
. 25,890(kN-mm)
B2 Rod directly connected . 235.4(kN) at 110(mm)
. 64.7(kN) at 400(mm)
. 25,890(kN-mm)
Hanging type, but seated
C1 . 235.4(kN) at 110(mm)
on the structure
. 64.7(kN) at 400(mm)
. 25,890(kN-mm)
F1 Supporting type . 235.4(kN) at 110(mm)
. 64.7(kN) at 400(mm)
CH - 3
CH - 3 30
Table 2.2 Usage and Capacity for CHB
. 9,218(kN-mm)
Hanging type for narrow space, but
C1 . 92.2(kN) at 100(mm)
seated on the structure
. 23(kN) at 400(mm)
. 9,218(kN-mm)
D1 Supporting type . 92.2(kN) at 100(mm)
. 23(kN) at 400(mm)
. 64,135(kN-mm)
Directly connected to structure with eye
LB1 . 256.5(kN) at 250(mm)
plate for narrow space
CHV-LB1
. 160.3(kN) at 400(mm)
CHV-LB1
CHV-LB2
note 1) Capacity Constant = Max Travel x Load at a given hanger
CHV-LB2
CH - 4
31 CH - 4
Constant Hangers and Supports
3.0 Configuration and Features
Most configuration of standardized constant hanger is similar, but upper connecting part and direction of spring case are slightly different
according to each type.
Fig. 3.1 show the schematic diagram and main items of the constant hanger.
Several features are described as follows;
1) Use the pre-relaxed spring coil in order to guarantee spring characteristics for plant life.
2) The casing is strong enough to withstand the external impact during erection.
3) Adequately enclose the spring coil to prevent from the dirt, the snow and the water which can degrade the spring
characteristics.
4) Use dry bearing to reduce the friction parts and withstand overload in the rotating part.
5) The hole of the load blocks tapered to absorb the swing of the rod about up to 4o due to horizontal movement of the
pipe.
6) Universal locking device used.
7) Turnbuckle placed to adjust the pipe elevation.
8) Load adjusted by turning the nut placed in the spring plate, but by turning the load adjust bolt for safety.
9) Lifting lug attached to handle and install easily.
10) Designed as follows to protect the hanger from the abnormal operation or overstress;
a) To prevent the spring coil from the overstress by limiting the spring travel range.
b) All the items are strong enough to withstand the double load of the normal operating load or more when blocked
for hydro test or cleaning.
CH - 5
CH - 5 32
Part
Item Name
No.
1 Frame
2 Roller Guide
4 Travel Scale
6 Travel Stop
7 Locking Pin
8 Spring Case
9 Name Plate
10 Lifting Lug
11 Rotation Arm
12 Link Bolt
13 Travel Indicator
15 Load Block
16 Turnbuckle
17 Main Shaft
20 Load Scale
21 Roller Shaft
22 Roller
23 Coil Spring
24 Spring Plate
25 Tension Bolt
CH - 6
33 CH - 6
Constant Hangers and Supports
4.0 Selection Method
This section explains how to select constant hanger size step by step.
Step 1. Input Data
Load : W = 49(kN)
Actual Travel : AT = -70(mm)(downward)
Type CHH-C1 to be applicable
Required Travel Margin : 20% of actual travel and additionally 20(mm).
By Truncation, set
CH - 7
CH - 7 34
Rod Size Table
Travel Travel(cm) Travel
(cm) (cm)
Size 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Size
1 1
2 2
3 3
4 4
5 5
6 M16 6
7 7
8 8
9 9
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 M20 18
19 19
20 20
21
N/A 21
22 22
23 23
24 24
25 25
26 26
27 27
28 28
29 29
30 30
M36
31
M24 31
32 32
33 33
34 34
M42
35 35
36 36
37 37
38 38
39 39
40
M30 40
41 41
42 42
43 43
44 44
45 45
46 46
47
M36 47
48 48
49 49
50 50
51 M42 51
52 52
53 53
54 54
55 M48 55
56 M64 56
57 57
58 58
59 M72 M56 59
60 60
61 61
62 62
63 63
64
N/A M80 64
65 M72 65
66 66
67 67
68 M80 68
69 M90 69
Size 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Size
Travel Travel(cm) Travel
(cm) (cm)
note 1) When the Travel is more than 40, or the Size is more than 69, our products can be made to order specially.
CH - 8
35 CH - 8
Constant Hangers and Supports
5.0 Dimensions
B A B A
D F
PIN HOLE : S
Ja
F b
J
d
J
a
Q
C
C
E
W
E
75
75
R
R
3) Dimension B, C and J
according to hanger size and travel(marked as ** )
Dimension : mm
CH - 9 36
Dimension A, E and Q
Dimension : mm
note 1) Dimension E applies to uppermost blocking position. For other positions, E increases accordingly.
2) Dimension Q at TOP, unless mentioned
37 CH - 10
Constant Hangers and Supports
5.2 Type CHH-A1
B A
R
L
W
E
75
(SIZE 1 ~ 46)
R d
b
a
E
(SIZE 47 ~ 64)
Main Dimension(mm)
Main Dimension(mm)
Size
No. B C L w a b d
1-3 * * 35 136
4-7 * * 35 151
8-12 * * 45 191
13-20 194 166 50 259
21-28 189 166 50 289
29-36 264 228 75 339
37-46 259 305 105 419
47-52 322 365 105 512 11 65 24 800
53-56 322 365 105 522 11 65 24 800
57-60 322 365 105 562 26 65 24 800
61-64 389 393 110 572 6 65 30 800
CH - 11 38
Dimension A, E and Q
Dimension : mm
note 1) Dimension E applies to uppermost blocking position. For other positions, E increases accordingly.
2) Dimension Q at TOP, unless mentioned
CH - 12
39 CH - 12
Constant Hangers and Supports
5.3 Type CHH-B1, B2
B A
F D PIN HOLE : S
PIN HOLE : Sa
Ja
J
Q
W
C
E
75
TYPE B1 (1-69)
ADDITIONNAL HOLE
FOR SIZE 37-60
A
D
HOLE DIA : Sb
V
Q
C
Eb
75
CH - 13
CH - 13 40
Dimension A, E and Q
Dimen Maximum Travel(mm)
Size -sion 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400
A 378 387 396 404 413 422 430 439 448 456 465 474 482 491 500 508 517 517 517 517 517 517 517 517 517 517 604 604 604 604 604 604 604 604 604 604
1-3 E 235 230 225 220 215 230 225 220 215 210 205 200 195 190 185 180 175 170 165 160 155 150 145 140 135 130 180 175 170 165 160 155 150 145 140 135
Q 0 0 0 0 0 -3 0 0 0 0 0 0 0 0 0 0 0 9 17 26 35 43 52 60 69 78 -1 8 17 25 34 43 51 60 69 77
A 408 417 426 434 443 452 460 469 478 486 495 504 512 521 530 538 547 547 547 547 547 547 547 547 547 547 634 634 634 634 634 634 634 634 634 634
4-7 E 255 250 245 240 235 245 240 235 230 225 220 215 210 205 200 195 190 185 180 175 170 165 160 155 150 145 190 185 180 175 170 165 160 155 150 145
Q 0 0 0 0 0 -8 0 0 0 0 0 0 0 0 0 8 0 9 17 26 35 43 52 60 69 78 -1 8 17 25 34 43 51 60 69 77
A 424 433 442 450 459 468 476 485 494 502 511 520 528 537 546 554 563 572 580 589 598 563 563 563 563 563 650 650 650 650 650 650 650 650 650 650
8-12 E 280 275 270 265 260 280 275 270 265 260 255 250 245 240 235 230 225 220 215 210 205 200 195 190 185 180 225 220 215 210 205 200 195 190 185 180
Q 0 0 0 0 0 -18 -10 -1 0 0 0 0 0 0 0 8 0 9 17 26 35 43 52 60 69 78 -1 8 17 25 34 43 51 60 69 77
A 567 576 584 593 602 610 619 628 636 645 654 662 671 680 688 697 706 714 723 732 740 749 757 766 775
13 - 24
E 320 315 310 305 300 295 290 285 280 275 270 265 260 255 250 245 240 235 230 225 220 215 210 205 200
A 597 606 614 623 632 640 649 658 666 675 684 692 701 710 718 727 736 744 753 762 770 779 787 796 805
25 - 28
E 320 315 310 305 300 295 290 285 280 275 270 265 260 255 250 245 240 235 230 225 220 215 210 205 200
A 709 718 727 735 744 753 761 770 779 787 796 805 813 822 831 839 848 857 865 874 882 891 900 908 917 926 934 943 952 960 969 978 986
29 - 36
E 435 430 425 420 415 410 405 400 395 390 385 380 375 370 365 360 355 350 345 340 335 330 325 320 315 310 305 300 295 290 285 280 275
A 882 890 899 908 916 925 934 942 951 960 968 977 986 994 1003 1012 1020 1029 1037 1046 1055 1063 1072 1081 1089 1098 1107 1115 1124 1133 1141
37 - 46
E 565 560 555 550 545 540 535 530 525 520 515 510 505 500 495 490 485 480 475 470 465 460 455 450 445 440 435 430 425 420 415
A 1272 1281 1290 1299 1308 1317 1326 1335 1344 1353 1362 1371 1379 1389 1397 1406 1415 1424 1433 1442 1450 1459 1468 1477 1484 1492 1501 1508 1518 1526
47 - 50
E 760 755 750 745 740 735 725 720 715 710 705 700 695 685 680 675 670 665 660 655 645 640 635 630 625 620 615 605 600 595
A 1382 1391 1400 1409 1418 1427 1436 1445 1454 1463 1472 1481 1489 1499 1507 1516 1525 1534 1543 1552 1560 1569 1578 1587 1594 1602 1611 1618 1628 1636
51 - 52
E 760 755 750 745 740 735 725 720 715 710 705 700 695 685 680 675 670 665 660 655 645 640 635 630 625 620 615 605 600 595
A 1290 1298 1306 1315 1323 1331 1339 1347 1356 1364 1372 1380 1388 1397 1405 1413 1421 1429 1438 1446 1454 1462 1470 1479 1487 1495 1503 1511 1519 1528
53 - 56
E 760 755 750 745 740 735 725 720 715 710 705 700 695 685 680 675 670 665 660 655 645 640 635 630 625 620 615 605 600 595
A 1330 1338 1346 1355 1363 1371 1379 1387 1396 1404 1412 1420 1428 1437 1445 1453 1461 1469 1478 1486 1494 1502 1510 1519 1527 1535 1543 1551 1559 1568
57 - 60
E 760 755 750 745 740 735 725 720 715 710 705 700 695 685 680 675 670 665 660 655 645 640 635 630 625 620 615 605 600 595
A 1451 1460 1468 1476 1484 1492 1501 1509 1517 1525 1533 1542 1550 1558 1566 1574 1583 1591 1599 1607 1615 1624 1632 1640 1648 1656 1664 1673
61 - 64
E 885 880 875 870 860 855 850 845 840 835 830 820 815 810 805 800 795 790 780 775 770 765 760 755 750 740 735 730
A 1509 1517 1525 1533 1542 1550 1558 1566 1574 1583 1591 1599 1607 1615 1624 1632 1640 1648 1656 1664 1673
65 E 880 875 870 865 855 850 845 840 835 830 825 815 810 805 800 795 790 785 775 770 765
R M72 M72 M72 M72 M64 M64 M64 M64 M64 M64 M64 M64 M56 M56 M56 M56 M56 M56 M56 M56 M56
A 1509 1517 1525 1533 1542 1550 1558 1566 1574 1583 1591 1599 1607 1615 1624 1632 1640 1648 1656 1664 1673
66 E 880 875 870 865 855 850 845 840 835 830 825 815 810 805 800 795 790 785 775 770 765
R M80 M72 M72 M72 M72 M72 M72 M64 M64 M64 M64 M64 M64 M64 M64 M56 M56 M56 M56 M56 M56
A 2024 2032 2040 2048 2057 2065 2073 2081 2089 2098 2106 2114 2122 2130 2139 2147 2155 2163 2171 2179 2188
67 E 960 955 949 943 937 932 926 920 914 909 913 907 901 896 890 884 879 873 867 861 846
R M80 M80 M80 M80 M80 M72 M72 M72 M72 M72 M64 M64 M64 M64 M64 M64 M64 M64 M64 M64 M56
A 2024 2032 2040 2048 2057 2065 2073 2081 2089 2098 2106 2114 2122 2130 2139 2147 2155 2163 2171 2179 2188
68 E 960 955 949 943 937 932 926 920 914 909 903 897 891 886 890 884 879 873 867 861 856
R M90 M80 M80 M80 M80 M80 M72 M72 M72 M72 M72 M72 M72 M72 M72 M64 M64 M64 M64 M64 M64
A 2134 2142 2150 2158 2167 2175 2183 2191 2199 2208 2216 2224 2232 2240 2249 2257 2265 2273 2281 2289 2298
69 E 960 955 949 943 937 932 926 920 914 909 903 897 891 886 880 874 869 863 867 861 856
R M90 M90 M90 M80 M80 M80 M80 M80 M80 M72 M72 M72 M72 M72 M72 M72 M72 M72 M64 M64 M64
note 1) Dimension E applies to uppermost blocking position. For other positions, E increases accordingly.
2) Dimension Q is equal to zero for size 13 or larger at TOP & Bottom.
3) Dimension Q at TOP for size 1 to 12.
41 CH - 14
Constant Hangers and Supports
5.4 Type CHH-B1A
B A
D F
PIN HOLE : S
Ja
W
E
75
(SIZE 1 ~ 46)
B A
F
a
J
d
C
E
(SIZE 47 ~ 69)
CH - 15 42
Dimension A, E and Q
Dimen Maximum Travel(mm)
Size -sion 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400
A 370 375 380 384 389 394 398 403 409 413 417 421 423 426 428 428 429 430 429 429 429 427 426 425 422 420 418 414 411 408 403 399 395 389 384 379
1 E 235 230 225 220 215 230 225 220 215 210 205 200 195 190 185 180 175 170 165 160 155 150 145 140 135 130 180 175 170 165 160 155 150 145 140 135
Q 8 12 16 20 24 28 32 36 39 43 48 53 59 65 72 80 88 96 105 114 123 133 143 152 164 175 186 198 210 221 235 248 260 275 289 302
A 369 377 384 390 397 403 408 414 421 426 431 436 440 444 447 451 455 459 461 464 467 468 470 472 472 473 474 473 473 473 471 470 469 466 464 462
2-3 E 235 230 225 220 215 230 225 220 215 210 205 200 195 190 185 180 175 170 165 160 155 150 145 140 135 130 180 175 170 165 160 155 150 145 140 135
Q 9 10 12 14 16 19 22 25 27 30 34 38 42 47 53 57 62 67 73 79 85 92 99 105 114 122 129 139 148 156 167 177 186 198 209 219
A 401 409 416 421 428 433 439 445 450 454 461 467 472 476 480 484 488 492 494 497 500 501 503 505 505 506 507 507 506 506 504 503 502 499 497 495
4-5 E 255 250 245 240 235 245 240 235 230 225 220 215 210 205 200 195 190 185 180 175 170 165 160 155 150 145 190 185 180 175 170 165 160 155 150 145
Q 7 8 10 13 15 19 21 24 28 32 34 37 40 45 50 54 59 64 70 76 82 89 96 102 111 119 126 135 145 153 164 174 183 195 206 126
A 402 410 418 424 431 438 445 453 460 466 473 480 485 491 496 500 510 515 520 525 530 545 550 550 555 560 565 565 570 575 580 580 585 590 590 595
6-7 E 255 250 245 240 235 245 240 235 230 225 220 215 210 205 200 195 190 185 180 175 170 165 160 155 150 145 190 185 180 175 170 165 160 155 150 145
Q 6 7 8 10 12 14 15 16 18 20 22 24 27 30 34 38 37 41 44 48 52 45 49 57 61 65 68 77 81 84 88 97 100 104 113 116
A 419 427 435 442 450 458 465 472 479 485 492 499 505 511 517 523 529 535 541 548 555 560 566 571 576 576 580 584 588 591 594 602 604 606 608 615
8 - 12 E 280 275 270 265 260 280 275 270 265 260 255 250 245 240 235 230 225 220 215 210 205 200 195 190 185 180 225 220 215 210 205 200 195 190 185 180
Q 5 6 7 8 9 10 11 13 15 17 26 28 30 33 37 38 34 38 39 41 44 46 49 52 56 65 69 74 79 84 90 91 97 104 111 112
A 561 569 576 583 592 599 606 614 621 630 635 643 651 658 664 671 677 685 692 699 704 712 718 726 733
13 - 16 E 320 315 310 305 300 295 290 285 280 275 270 265 260 255 250 245 240 235 230 225 220 215 210 205 200
Q 6 7 8 10 10 11 13 14 15 17 20 22 25 27 30 33 36 40 44 47 50 54 60 64 68
A 561 569 576 583 592 599 606 614 621 630 635 643 651 658 664 671 677 685 692 699 704 712 718 726 733
17 - 24 E 320 315 310 305 300 295 290 285 280 275 270 265 260 255 250 245 240 235 230 225 220 215 210 205 200
Q 6 7 8 10 10 11 13 14 15 16 18 19 20 22 24 26 28 29 31 33 36 37 39 40 42
A 591 599 606 613 622 629 636 644 651 660 665 673 681 688 694 701 707 715 722 729 734 742 748 756 763
25 - 28 E 320 315 310 305 300 295 290 285 280 275 270 265 260 255 250 245 240 235 230 225 220 215 210 205 200
Q 6 7 8 10 10 11 13 14 15 16 18 19 20 22 24 26 28 29 31 33 36 37 39 40 42
A 705 710 716 724 732 740 746 754 762 770 776 786 794 802 808 816 824 832 838 846 854 862 870 878 886 894 902 910 918 924 932 940 946
29 - 36 E 435 430 425 420 415 410 405 400 395 390 385 380 375 370 365 360 355 350 345 340 335 330 325 320 315 310 305 300 295 290 285 280 275
Q 4 8 11 11 12 13 15 16 17 17 20 19 19 20 23 23 24 25 27 28 28 29 30 30 31 32 32 33 34 36 37 38 40
A 875 883 891 900 907 916 923 932 941 949 958 965 974 982 990 998 1004 1018 1020 1029 1036 1045 1052 1060 1067 1075 1082 1089 1096 1104 1111
37 - 46 E 565 560 555 550 545 540 535 530 525 520 515 510 505 500 495 490 485 480 475 470 465 460 455 450 445 440 435 430 425 420 415
Q 7 7 8 8 9 9 10 10 10 10 10 11 11 12 13 14 16 16 17 17 18.5 19 20 21 22 23 25 26 28 29 30
A 1282 1291 1300 1309 1318 1327 1336 1345 1354 1363 1372 1381 1389 1399 1407 1416 1425 1434 1443 1452 1460 1469 1478 1487 1494 1502 1511 1518 1528 1536
E 760 755 750 745 740 735 725 720 715 710 705 700 695 685 680 675 670 665 660 655 645 640 635 630 625 620 615 605 600 595
47 - 50
TOP -12 -13 -14 -14 -15 -16 -17 -16 -18 -19 -20 -21 -21 -22 -22 -23 -24 -25 -25 -26 -26 -27 -28 -28 -27 -27 -28 -27 -29 -28
Q
BOT -2 -3 -3 -2 -2 -2 -2 -1 -1 -2 -2 -2 -1 -1 0 0 0 -1 0 0 1 1 1 2 3 4 4 5 5 7
A 1392 1401 1410 1419 1428 1437 1446 1455 1464 1473 1482 1491 1499 1509 1517 1526 1535 1544 1553 1562 1570 1579 1588 1597 1604 1612 1621 1628 1638 1646
E 760 755 750 745 740 735 725 720 715 710 705 700 695 685 680 675 670 665 660 655 645 640 635 630 625 620 615 605 600 595
51 - 52
TOP -12 -13 -14 -14 -15 -16 -17 -16 -18 -19 -20 -21 -21 -22 -22 -23 -24 -25 -25 -26 -26 -27 -28 -28 -27 -27 -28 -27 -29 -28
Q
BOT -2 -3 -3 -2 -2 -2 -2 -1 -1 -2 -2 -2 -1 -1 0 0 0 -1 0 0 1 1 1 2 3 4 4 5 5 7
A 1312 1321 1330 1339 1348 1357 1366 1375 1384 1393 1402 1411 1419 1429 1437 1446 1455 1464 1473 1482 1490 1499 1508 1517 1524 1532 1541 1548 1558 1566
E 760 755 750 745 740 735 725 720 715 710 705 700 695 685 680 675 670 665 660 655 645 640 635 630 625 620 615 605 600 595
53 - 56
TOP -12 -13 -14 -14 -15 -16 -17 -16 -18 -19 -20 -21 -21 -22 -22 -23 -24 -25 -25 -26 -26 -27 -28 -28 -27 -27 -28 -27 -29 -28
Q
BOT -2 -3 -3 -2 -2 -2 -2 -1 -1 -2 -2 -2 -1 -1 0 0 0 -1 0 0 1 1 1 2 3 4 4 5 5 7
A 1352 1361 1370 1379 1388 1397 1406 1415 1424 1433 1442 1451 1459 1469 1477 1486 1495 1504 1513 1522 1530 1539 1548 1557 1564 1572 1581 1588 1598 1606
E 760 755 750 745 740 735 725 720 715 710 705 700 695 685 680 675 670 665 660 655 645 640 635 630 625 620 615 605 600 595
57 - 60
TOP -12 -13 -14 -14 -15 -16 -17 -16 -18 -19 -20 -21 -21 -22 -22 -23 -24 -25 -25 -26 -26 -27 -28 -28 -27 -27 -28 -27 -29 -28
Q
BOT -2 -3 -3 -2 -2 -2 -2 -1 -1 -2 -2 -2 -1 -1 0 0 0 -1 0 0 1 1 1 2 3 4 4 5 5 7
A 1476 1486 1495 1505 1514 1523 1532 1542 1551 1560 1569 1578 1587 1596 1605 1614 1623 1632 1641 1650 1659 1668 1677 1686 1694 1703 1712 1721
E 885 880 875 870 860 855 850 845 840 835 830 820 815 810 805 800 795 790 780 775 770 765 760 755 750 740 735 730
61 - 64
TOP -15 -16 -17 -19 -20 -21 -21 -23 -24 -25 -26 -26 -27 -28 -29 -30 -30 -31 -32 -33 -34 -34 -35 -36 -36 -37 -38 -38
Q
BOT -4 -4 -4 -5 -5 -5 -5 -6 -6 -6 -6 -5 -5 -5 -5 -5 -5 -5 -5 -5 -5 -4 -4 -4 -4 -4 -4 -3
A 1524 1532 1540 1548 1557 1565 1573 1581 1589 1598 1606 1614 1622 1630 1639 1647 1655 1663 1671 1679 1688
65
E 880 875 870 865 855 850 845 840 835 830 825 815 810 805 800 795 790 785 775 770 765
A 1524 1532 1540 1548 1557 1565 1573 1581 1589 1598 1606 1614 1622 1630 1639 1647 1655 1663 1671 1679 1688
66
E 880 875 870 865 855 850 845 840 835 830 825 815 810 805 800 795 790 785 775 770 765
A 2039 2047 2055 2063 2072 2080 2088 2096 2104 2113 2121 2129 2137 2145 2154 2162 2170 2178 2186 2194 2203
67
E 960 955 949 943 937 932 926 920 914 909 903 897 891 886 890 884 879 873 867 861 846
A 2039 2047 2055 2063 2072 2080 2088 2096 2104 2113 2121 2129 2137 2145 2154 2162 2170 2178 2186 2194 2203
68
E 960 955 949 943 937 932 926 920 914 909 903 897 891 886 890 884 879 873 867 861 856
A 2149 2157 2165 2173 2182 2190 2198 2206 2214 2223 2231 2239 2247 2255 2264 2272 2280 2288 2296 2304 2313
69
E 960 955 949 943 937 932 926 920 914 909 903 897 891 886 880 874 869 863 867 861 856
note 1) Dimension E applies to uppermost blocking position. For other positions, E increases accordingly.
2) Dimension Q at TOP for size 1 to 46.
3) Dimension Q equal to zero for size 65 or larger at TOP & Bottom
CH - 16
43 CH - 16
Constant Hangers and Supports
5.5 Type CHH-C1
B A
W
E
P
75
T
Jmin
U Y
Main Dimension(mm)
Size No.
B C U T Jmin W
8-12 165 115 200 6 70 191
13-20 167 170 270 9 90 259
21-28 167 170 270 9 90 289
29-36 241 180 300 9 90 339
37-46 247 230 360 12 100 419
47-52 322 280 460 19 150 512
53-56 322 280 460 19 200 522
57-60 322 280 460 19 200 562
CH - 17
CH - 17 44
Dimension A, E, K, L, P and Y
Dimen Maximum Travel(mm)
Size -sion 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400
A 424 433 442 450 459 468 476 485 494 501 511 520 530 537 546 554 563 572 580 589 598
E 122 117 112 107 102 97 92 87 82 77 72 67 62 57 52 47 42 37 32 27 22
K 119 128 137 145 154 163 171 180 189 197 206 215 225 232 241 249 258 267 275 284 293
8 - 12
L 163 163 163 163 163 163 241 241 241 241 241 241 241 241 241 293 293 293 293 293 293
P 185 185 185 185 185 185 235 235 235 235 235 235 235 235 235 255 255 255 255 255 255
Y 220 220 220 220 220 220 270 270 270 270 270 270 270 270 270 330 330 330 330 330 330
A 567 576 584 592 602 610 619 628 636 645 654 662 671 680 688 697 706 714 723 737 740 749 757 766 775
E 142 137 132 127 122 117 112 107 102 97 92 87 82 77 72 67 62 57 52 47 42 37 32 27 22
K 137 146 154 163 172 180 189 198 206 215 224 232 241 250 258 267 276 284 293 302 310 319 327 336 345
13 - 24
L 180 180 180 180 180 180 258 258 258 258 258 258 258 258 258 345 345 345 345 345 345 345 345 345 345
P 210 210 210 210 210 210 260 260 260 260 260 260 260 260 260 310 310 310 310 310 310 310 310 310 310
Y 240 240 240 240 240 240 290 290 290 290 290 290 290 290 290 380 380 380 380 380 380 380 380 380 380
A 597 606 614 622 632 640 649 658 666 675 684 692 701 710 718 727 736 744 753 767 770 779 787 796 805
E 142 137 132 127 122 117 112 107 102 97 92 87 82 77 72 67 62 57 52 47 72 37 32 27 22
K 137 146 154 163 172 180 189 198 206 215 224 232 241 250 258 267 276 284 293 302 310 319 327 336 345
25 - 28
L 180 180 180 180 180 180 258 258 258 258 258 258 258 258 258 345 345 345 345 345 345 345 345 345 345
P 210 210 210 210 210 210 260 260 260 260 260 260 260 260 260 310 310 310 310 310 310 310 310 310 310
Y 240 240 240 240 240 240 290 290 290 290 290 290 290 290 290 380 380 380 380 380 380 380 380 380 380
A 709 718 727 735 744 753 761 770 779 787 796 805 813 822 833 839 848 830 865 874 882 891 900 908 917 926 934 943 952 960 969 978 986
E 205 200 195 190 185 180 175 170 165 160 155 150 145 140 135 130 125 120 115 110 105 100 95 90 85 80 75 70 65 60 55 50 45
K 159 168 177 185 194 203 211 220 229 237 246 255 263 272 281 289 298 307 315 324 332 341 350 358 367 376 384 393 402 410 419 428 436
29 - 36
L 203 203 203 203 203 203 307 307 307 307 307 307 307 307 307 307 307 307 402 402 402 402 402 402 402 402 402 402 402 436 436 436 436
P 280 280 280 280 280 280 350 350 350 350 350 350 350 350 350 350 350 350 370 370 370 370 370 370 370 370 370 370 370 420 420 420 420
Y 280 280 280 280 280 280 350 350 350 350 350 350 350 350 350 350 350 350 440 440 440 440 440 440 440 440 440 440 440 480 480 480 480
A 885 893 902 911 919 928 937 945 954 963 971 980 989 997 1006 1015 1023 1032 1040 1049 1058 1066 1075 1084 1092 1101 1110 1118 1127 1136 1144
E 235 230 225 220 215 210 205 200 195 190 185 180 175 170 165 160 155 150 145 140 135 130 125 120 115 110 105 100 95 90 85
K 202 210 219 228 236 245 254 262 271 280 288 297 306 314 323 332 340 349 357 366 375 383 392 401 409 418 427 435 444 453 461
37 - 46
L 271 271 271 271 271 271 271 271 271 357 357 357 357 357 357 357 357 357 357 427 427 427 427 427 427 427 427 461 461 461 461
P 360 360 360 360 360 360 360 360 360 410 410 410 410 410 410 410 410 410 410 450 450 450 450 450 450 450 450 470 470 470 470
Y 360 360 360 360 360 360 360 360 360 410 410 410 410 410 410 410 410 410 410 500 500 500 500 500 500 500 500 500 500 500 500
A 1260 1268 1276 1285 1293 1301 1309 1317 1326 1334 1342 1350 1358 1367 1375 1383 1391 1399 1408 1416 1424 1432 1440 1449 1457 1465 1473 1481 1489 1498
E 357 351 345 340 334 328 322 317 311 305 300 294 288 282 277 271 265 259 254 248 242 236 231 225 219 214 208 202 196 191
K TOP 320 328 336 345 353 361 369 377 386 394 402 410 418 427 435 443 451 459 468 476 484 492 500 509 517 525 533 541 549 558
47 - 50 BOT 330 339 348 357 366 375 384 393 402 411 420 429 438 448 457 466 475 484 493 502 511 520 529 538 547 556 565 574 583 593
L 377 377 377 377 377 377 377 377 451 451 451 451 451 451 451 451 451 525 525 525 525 525 525 525 525 525 558 558 558 558
P 500 500 500 500 500 500 500 500 520 520 520 520 520 520 520 520 520 570 570 570 570 570 570 570 570 570 620 620 620 620
Y 520 520 520 520 520 520 520 520 520 520 520 520 520 520 520 520 520 600 600 600 600 600 600 600 600 600 650 650 650 650
A 1370 1378 1386 1395 1403 1411 1419 1427 1436 1444 1452 1460 1468 1477 1485 1493 1501 1509 1518 1526 1534 1542 1550 1559 1567 1575 1583 1591 1599 1608
E 357 351 345 340 334 328 322 317 311 305 300 294 288 282 277 271 265 259 254 248 242 236 231 225 219 214 208 202 196 191
K TOP 320 328 336 345 353 361 369 377 386 394 402 410 418 427 435 443 451 459 468 476 484 492 500 509 517 525 533 541 549 558
51 - 52 BOT 330 339 348 357 366 375 384 393 402 411 420 429 438 448 457 466 475 484 493 502 511 520 529 538 547 556 565 574 583 593
L 377 377 377 377 377 377 377 377 451 451 451 451 451 451 451 451 451 525 525 525 525 525 525 525 525 525 558 558 558 558
P 500 500 500 500 500 500 500 500 520 520 520 520 520 520 520 520 520 570 570 570 570 570 570 570 570 570 620 620 620 620
Y 520 520 520 520 520 520 520 520 520 520 520 520 520 520 520 520 520 600 600 600 600 600 600 600 600 600 650 650 650 650
A 1290 1298 1306 1315 1323 1331 1339 1349 1356 1364 1372 1380 1388 1397 1405 1413 1421 1429 1438 1446 1454 1462 1470 1479 1487 1495 1503 1511 1519 1528
E 357 351 345 340 334 328 322 317 311 305 300 294 288 282 277 271 265 259 254 248 242 236 231 225 219 214 208 202 196 191
K TOP 320 328 336 345 353 361 369 377 386 394 402 410 418 427 435 443 451 459 468 476 484 492 500 509 517 525 533 541 549 558
53 - 56 BOT 330 339 348 357 366 375 384 393 402 411 420 429 438 448 457 466 475 484 493 502 511 520 529 538 547 556 565 574 583 593
L 377 377 377 377 377 377 377 377 451 451 451 451 451 451 451 451 451 525 525 525 525 525 525 525 525 525 558 558 558 558
P 500 500 500 500 500 500 500 500 520 520 520 520 520 520 520 520 520 570 570 570 570 570 570 570 570 570 620 620 620 620
Y 520 520 520 520 520 520 520 520 520 520 520 520 520 520 520 520 520 600 600 600 600 600 600 600 600 600 650 650 650 650
A 1330 1338 1346 1355 1363 1371 1379 1389 1396 1404 1412 1420 1428 1437 1445 1453 1461 1469 1478 1486 1494 1502 1510 1519 1527 1535 1543 1551 1559 1568
E 357 351 345 340 334 328 322 317 311 305 300 294 288 282 277 271 265 259 254 248 242 236 231 225 219 214 208 202 196 191
K TOP 320 328 336 345 353 361 369 377 386 394 402 410 418 427 435 443 451 459 468 476 484 492 500 509 517 525 533 541 549 558
57 - 60 BOT 330 339 348 357 366 375 384 393 402 411 420 429 438 448 457 466 475 484 493 502 511 520 529 538 547 556 565 574 583 593
L 377 377 377 377 377 377 377 377 451 451 451 451 451 451 451 451 451 525 525 525 525 525 525 525 525 525 558 558 558 558
P 500 500 500 500 500 500 500 500 520 520 520 520 520 520 520 520 520 570 570 570 570 570 570 570 570 570 620 620 620 620
Y 520 520 520 520 520 520 520 520 520 520 520 520 520 520 520 520 520 600 600 600 600 600 600 600 600 600 650 650 650 650
note 1) Dimension E applies to uppermost blocking position. For other positions, E increases accordingly.
CH - 18
45 CH - 18
Constant Hangers and Supports
5.6 Type CHH-F1
W
H F J
C B A
Sliding Plate
3
Size Applicable K
Type K Weight(kg)
(Axt) Hanger Size
CP-XP-C-50 50x6t 90 CHH-F1-8~12 0.03
CP-XP-C-80 80x6t 150 CHH-F1-13~28 0.07
CP-XP-C-150 150x6t 250 CHH-F1-29~46 0.23
CP-XP-C-180 180x6t 300 CHH-F1-47~60 0.34
CH - 19
CH - 19 46
Dimension E, J,M and H
Dimen Maximum Travel(mm)
Size -sion 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400
H 16.5 25.5 34.5 42.5 51.5 60.5 68.5 77.5 86.5 79.5 88.5 97.5 93 102 111 106.5 115.5 124.5 120 129 138
J 194 194 194 194 194 194 194 194 194 194 194 194 209 209 209 224 224 224 239 239 239
8 - 12 M 119 128 137 145 154 163 171 180 189 197 206 215 223 232 241 249 258 267 275 284 293
BOT 415 405 405 395 390 390 380 380 370 370 360 360 370 360 360 370 360 360 370 360 350
E
TOP 465 465 475 475 480 490 490 500 500 510 510 520 540 540 550 570 570 580 600 600 600
H 2 11 19 28 37 45 54 63 71 80 89 97 106 92.5 100.5 109.5 118.5 126.5 135.5 132 140 149 144 153 163
J 263 263 263 263 263 263 263 263 263 263 263 263 263 263 263 263 263 263 263 278 278 278 293 293 293
13 - 20 M 137 146 154 163 172 180 189 198 206 215 224 232 241 250 258 267 276 284 293 302 310 319 327 336 345
BOT 530 530 520 520 510 510 500 500 490 490 480 480 470 470 460 460 450 450 440 450 450 440 450 450 440
E
TOP 590 600 600 610 610 620 620 630 630 640 640 650 650 660 660 670 670 680 680 700 710 710 730 740 740
H 2 11 19 28 37 45 54 63 71 80 89 97 106 92.5 100.5 109.5 118.5 126.5 135.5 132 140 149 144.5 153.5 162.5
J 263 263 263 263 263 263 263 263 263 263 263 263 263 263 263 263 263 263 263 278 278 278 293 293 293
21 - 24 M 137 146 154 163 172 180 189 198 206 215 224 232 241 250 258 267 276 284 293 302 310 319 327 336 345
BOT 530 530 520 520 510 510 500 500 490 490 480 480 470 470 460 460 450 450 440 450 450 440 450 450 440
E
TOP 590 600 600 610 610 620 620 630 630 640 640 650 650 660 660 670 670 680 680 700 710 710 730 740 740
H 2 11 19 28 37 45 54 63 71 80 89 97 106 92.5 100.5 109.5 118.5 126.5 135.5 132 140 149 144.5 153.5 162.5
J 263 263 263 263 263 263 263 263 263 263 263 263 263 263 263 263 263 263 263 278 278 278 293 293 293
25 - 28 M 137 146 154 163 172 180 189 198 206 215 224 232 241 250 258 267 276 284 293 302 310 319 327 336 345
BOT 530 530 520 520 510 510 500 500 490 490 480 480 470 470 460 460 450 450 440 450 450 440 450 450 440
E
TOP 590 600 600 610 610 620 620 630 630 640 640 650 650 660 660 670 670 680 680 700 710 710 730 740 740
H -26 -17 -8 0 9 18 26 35 44 52 61 70 78 87 96 104 113 122 130 139 147 156 165 148 157 166 174 183 172 180 189 198 206
J 341 341 341 341 341 341 341 341 341 341 341 341 341 341 341 341 341 341 341 341 341 341 341 366 366 366 366 366 391 391 391 391 391
29 - 36 M 159 168 177 185 194 203 211 220 229 237 246 255 263 272 281 289 298 307 315 324 332 341 350 358 367 376 384 393 402 410 419 428 436
BOT 640 640 630 630 620 620 610 610 600 600 590 590 580 580 570 570 560 560 550 550 540 540 530 550 550 540 540 530 550 550 540 540 530
E
TOP 720 730 730 740 740 750 750 760 760 770 770 780 780 790 790 800 800 810 810 820 820 830 830 860 870 870 880 880 910 920 920 930 930
H -8 0 9 18 26 35 44 52 61 70 78 87 96 104 113 122 130 139 147 156 165 128 137 146 154 163 172 180 189 198 206
J 382 382 382 382 382 382 382 382 382 382 382 382 382 382 382 382 382 382 382 382 382 432 432 432 432 432 432 432 432 432 432
37 - 46 M 202 210 219 228 236 245 254 262 271 280 288 297 306 314 323 332 340 349 357 366 375 383 392 401 409 418 427 435 444 453 461
BOT 760 750 750 740 730 730 730 720 710 700 700 700 690 690 680 680 670 670 660 660 650 700 690 690 680 680 670 670 660 660 650
E
TOP 860 860 870 870 870 880 890 890 890 890 900 910 910 920 920 930 930 940 940 950 950 1010 1010 1020 1020 1030 1030 1040 1040 1050 1050
TOP 25 34 43 52 61 70 79 88 97 106 115 124 133 143 152 161 170 179 188 197 206 215 224 233 242 251 260 269 278 288
H
BOT 15 23 31 40 48 56 64 72 81 89 97 105 113 122 130 138 146 154 163 171 179 187 195 204 212 220 228 236 244 253
J 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549
47 - 52 TOP 330 339 348 357 366 375 384 393 402 411 420 429 438 448 457 466 475 484 493 502 511 520 529 538 547 556 565 574 583 593
M
BOT 320 328 336 345 353 361 369 377 386 394 402 410 418 427 435 443 451 459 468 476 484 492 500 509 517 525 533 541 549 558
BOT 910 910 910 900 900 890 890 880 880 880 870 870 860 860 850 850 850 840 840 830 830 830 820 820 810 810 800 800 800 790
E
TOP 1020 1030 1040 1040 1050 1050 1060 1060 1070 1080 1080 1090 1090 1100 1100 1110 1120 1120 1130 1130 1140 1150 1150 1160 1160 1170 1170 1180 1190 1190
TOP 25 34 43 52 61 70 79 88 97 106 115 124 133 143 152 161 170 179 188 197 206 215 224 233 242 251 260 269 278 288
H
BOT 15 23 31 40 48 56 64 72 81 89 97 105 113 122 130 138 146 154 163 171 179 187 195 204 212 220 228 236 244 253
J 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549
53 - 56 TOP 330 339 348 357 366 375 384 393 402 411 420 429 438 448 457 466 475 484 493 502 511 520 529 538 547 556 565 574 583 593
M
BOT 320 328 336 345 353 361 369 377 386 394 402 410 418 427 435 443 451 459 468 476 484 492 500 509 517 525 533 541 549 558
BOT 910 910 910 900 900 890 890 880 880 880 870 870 860 860 850 850 850 840 840 830 830 830 820 820 810 810 800 800 800 790
E
TOP 1020 1030 1040 1040 1050 1050 1060 1060 1070 1080 1080 1090 1090 1100 1100 1110 1120 1120 1130 1130 1140 1150 1150 1160 1160 1170 1170 1180 1190 1190
TOP 25 34 43 52 61 70 79 88 97 106 115 124 133 143 152 161 170 179 188 197 206 215 224 233 242 251 260 269 278 288
H
BOT 15 23 31 40 48 56 64 72 81 89 97 105 113 122 130 138 146 154 163 171 179 187 195 204 212 220 228 236 244 253
J 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549 549
57 - 60 TOP 330 339 348 357 366 375 384 393 402 411 420 429 438 448 457 466 475 484 493 502 511 520 529 538 547 556 565 574 583 593
M
BOT 320 328 336 345 353 361 369 377 386 394 402 410 418 427 435 443 451 459 468 476 484 492 500 509 517 525 533 541 549 558
BOT 910 910 910 900 900 890 890 880 880 880 870 870 860 860 850 850 850 840 840 830 830 830 820 820 810 810 800 800 800 790
E
TOP 1020 1030 1040 1040 1050 1050 1060 1060 1070 1080 1080 1090 1090 1100 1100 1110 1120 1120 1130 1130 1140 1150 1150 1160 1160 1170 1170 1180 1190 1190
CH - 20
47 CH - 20
Constant Hangers and Supports
5.7 Type CHV-LB1
D F
PIN HOLE : S
Ja
J
E
75
A
CH - 21
CH - 21 48
Dimension E, K and Q
Dimen Maximum Travel(mm)
Size
-sion 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400
E 203 198 193 188 183 178
8 - 12 K 142 151 160 168 177 186
Q 9 12 15 17 18 20
E 268 263 258 253 248
13 - 20 K 189 198 207 215 224
Q 15 17 19 21 23
E 258 253 248
21 - 24 K 207 215 224
Q 14 15 17
E 258 253 248
25 - 28 K 207 215 224
Q 14 15 17
E 383 378 373 368 363 358
29 - 36 K 243 252 261 269 278 287
Q 13 14 15 17 19 21
E 445 440 435 430 425 420 415 410 405 400 395 390 385 380 375 370 365 360 355 350 345 340 335
37 - 44 K 306 315 323 332 341 349 358 367 375 384 392 401 410 418 427 436 444 453 462 470 479 488 496
Q 21 22 24 25 26 27 28 29 31 33 35 37 39 41 43 45 47 50 53 55 57 59 62
E 445 440 435 430 425 420 415 410 405 400 395 390 385 380 375 370 365 360 355 350 345 340 335
45 - 46 K 306 315 323 332 341 349 358 367 375 384 392 401 410 418 427 436 444 453 462 470 479 488 496
Q 21 22 24 25 26 27 28 29 31 33 35 37 39 41 43 45 47 50 53 55 57 59 62
E 605 599 594 588 582 576 571 565 559 554 548 542 536 531 525 519 513 508 502 496 490
K TOP 394 402 410 418 427 435 443 451 459 468 476 484 492 500 509 517 525 533 541 549 558
47 - 52 BOT 411 420 429 438 448 457 466 475 484 492 502 511 520 529 538 547 556 565 574 583 592
Q TOP 27 29 31 33 35 36 38 40 42 44 46 48 51 53 56 58 61 63 66 68 71
BOT 44 47 50 53 56 58 61 64 66 69 72 75 79 82 86 89 92 95 99 102 106
E 605 599 594 588 582 576 571 565 559 554 548 542 536 531 525 519 513 508 502 496 490
TOP 394 402 410 418 427 435 443 451 459 468 476 484 492 500 509 517 525 533 541 549 558
K
53 - 56 BOT 411 420 429 438 448 457 466 475 484 492 502 511 520 529 538 547 556 565 574 583 592
TOP 27 29 31 33 35 36 38 40 42 44 46 48 51 53 56 58 61 63 66 68 71
Q
BOT 44 47 50 53 56 58 61 64 66 69 72 75 79 82 86 89 92 95 99 102 106
E 594 588 582 576 571 565 559 554 548 542 536 531 525 519 513 508 502 496 490
TOP 410 418 427 435 443 451 459 468 476 484 492 500 509 517 525 533 541 549 558
K
57 - 60 BOT 429 438 448 457 466 475 484 492 502 511 520 529 538 547 556 565 574 583 592
TOP 25 26 28 29 31 33 34 36 38 40 42 44 46 48 50 52 54 56 59
Q
BOT 44 46 49 51 54 57 58 61 64 67 70 73 76 79 81 84 87 90 94
E 709 703 697 691 686 680 674 669 663 657 651 646 640 634 628 623 617 611 605
TOP 437 445 454 462 470 478 486 495 503 511 519 527 536 544 552 560 568 576 585
K
61 - 64 BOT 456 465 474 484 493 502 511 520 529 538 547 556 565 574 583 592 601 610 619
TOP 25 26 28 29 31 33 35 36 38 39 40 41 43 45 47 49 51 53 55
Q
BOT 44 46 49 51 54 57 59 61 64 66 68 70 73 76 78 81 84 87 90
E 697 691 686 680 674 668 663 657 651 646 640 634 628 623
TOP 478 486 495 503 511 519 527 536 544 552 560 568 576 585
K
65 BOT 502 511 520 529 538 547 556 565 574 583 592 601 610 620
TOP 34 36 38 40 41 44 47 49 50 52 54 56 58 61
Q
BOT 58 61 63 66 68 72 76 78 80 83 86 89 92 96
E 697 691 686 680 674 668 663 657 651 646 640 634 628 623
K TOP 478 486 495 503 511 519 527 536 544 552 560 568 576 585
66 BOT 502 511 520 529 538 547 556 565 574 583 592 601 610 620
Q TOP 34 36 38 40 41 44 47 49 50 52 54 56 58 61
BOT 58 61 63 66 68 72 76 78 80 83 86 89 92 96
E 775 769 764 768 762 756 751 745 739 734 728 722 716 701
TOP 536 544 553 561 569 577 585 594 602 610 618 626 634 643
K
67 BOT 560 568 578 587 596 605 614 624 633 641 650 659 668 678
TOP 38 40 42 44 45 47 49 51 54 56 58 61 63 65
Q
BOT 62 64 67 70 72 75 78 81 85 87 90 94 97 100
E 775 769 764 758 752 746 741 745 739 734 728 722 716 711
TOP 536 544 553 561 569 577 585 594 602 610 618 626 634 643
K
68 BOT 560 568 578 587 596 605 614 624 633 641 650 659 668 678
TOP 38 40 42 44 45 47 49 51 54 56 58 61 63 65
Q
BOT 62 64 67 70 72 75 78 81 85 87 90 94 97 100
E 775 769 764 758 752 746 741 735 729 724 718 722 716 711
TOP 536 544 553 561 569 577 585 594 602 610 618 626 634 643
K
69 BOT 560 568 578 587 596 605 614 624 633 641 650 659 668 678
TOP 38 40 42 44 45 47 49 51 54 56 58 61 63 65
Q
BOT 62 64 67 70 72 75 78 81 85 87 90 94 97 100
note 1) Dimension E applies to uppermost blocking position. For other positions, E increases accordingly.
2) Dimension Q at TOP, unless mentioned
CH - 22
49 CH - 22
Constant Hangers and Supports
5.8 Type CHV-LB2
PIN HOLE : S D B F
PIN HOLE : Sa
Ja
J
E
75
A
CH - 23
CH - 23 50
Dimension E, K and Q
Dimen Maximum Travel(mm)
Size
-sion 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400
E 203 198 193 188 183 178
8-12 K 142 151 160 168 177 186
Q 0 0 0 0 4 12
E 268 263 258 253 248
13-20 K 189 198 207 215 224
Q 0 0 0 0 0
E 258 253 248
21-24 K 207 215 224
Q 0 0 0
E 258 253 248
25-28 K 207 215 224
Q 0 0 0
E 383 378 373 368 363 358
29-36 K 243 252 261 269 278 282
Q 0 0 0 0 0 0
E 445 440 435 430 425 420 415 410 405 400 395 390 385 380 375 370 365 360 355
37-44 K 306 315 323 332 341 349 358 367 375 384 392 401 410 418 427 436 444 453 462
Q 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
E 445 440 435 430 425 420 415 410 405 400 395 390 385 380 375 370 365 360 355
45-46 K 306 315 323 332 341 349 358 367 375 384 392 401 410 418 427 436 444 453 462
Q 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
E 605 599 594 588 582 576 571 565 559 554 548 542 536 531 525 519 513
TOP 394 402 410 418 427 435 443 451 459 468 476 484 492 500 509 517 525
K
47-52 BOT 411 420 429 438 448 457 466 475 484 492 502 511 520 529 538 547 556
TOP 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Q
BOT 17 18 19 20 21 22 23 24 24 25 26 27 28 29 30 31 31
E 605 599 594 588 582 576 571 565 559 554 548 542 536 531 525 519 513
TOP 394 402 410 418 427 435 443 451 459 468 476 484 492 500 509 517 525
K
53-56 BOT 411 420 429 438 448 457 466 475 484 492 502 511 520 529 538 547 556
TOP 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Q
BOT 17 18 19 20 21 22 23 24 24 25 26 27 28 29 30 31 31
E 594 588 582 576 571 565 559 554 548 542 536 531 525 519 513
TOP 410 418 427 435 443 451 459 468 476 484 492 500 509 517 525
K
57-60 BOT 429 438 448 457 466 475 484 492 502 511 520 529 538 547 556
TOP 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Q
BOT 19 20 21 22 23 24 24 25 26 27 28 29 30 31 31
E 709 703 697 691 686 680 674 669 663 657 651 646 640 634 628 623 617
TOP 437 445 454 462 470 478 486 495 503 511 519 527 536 544 552 560 568
K
61-64 BOT 456 465 474 484 493 502 511 520 529 538 547 556 565 574 583 592 601
TOP 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Q
BOT 19 20 21 22 23 24 24 25 26 27 28 29 30 31 31 32 33
E 697 691 686 680 674 668 663 657 651 646 640 634 628
TOP 478 486 495 503 511 519 527 536 544 552 560 568 576
K
65 BOT 502 511 520 529 538 547 556 565 574 583 592 601 610
TOP 0 0 0 0 0 0 0 0 0 0 0 0 0
Q
BOT 24 24 25 26 27 28 29 30 31 31 32 33 34
E 697 691 686 680 674 668 663 657 651 646 640 634 628
TOP 478 486 495 503 511 519 527 536 544 552 560 568 576
K
66 BOT 502 511 520 529 538 547 556 565 574 583 592 601 610
TOP 0 0 0 0 0 0 0 0 0 0 0 0 0
Q
BOT 24 24 25 26 27 28 29 30 31 31 32 33 34
E 775 769 764 768 762 756 751 745 739 734 728 722 716 701
TOP 536 544 553 561 569 577 585 594 602 610 618 626 634 643
K
67 BOT 560 568 578 587 596 605 614 624 633 641 650 659 668 678
TOP -4 0 0 0 0 0 0 0 0 0 0 0 0 0
Q
BOT 20 24 25 26 27 28 29 30 31 31 32 33 34 35
E 775 769 764 758 752 746 741 745 739 734 728 722 716 711
TOP 536 544 553 561 569 577 585 594 602 610 618 626 634 643
K
68 BOT 560 568 578 587 596 605 614 624 633 641 650 659 668 678
TOP -4 0 0 0 0 0 0 0 0 0 0 0 0 0
Q
BOT 20 24 25 26 27 28 29 30 31 31 32 33 34 35
E 775 769 764 758 752 746 741 735 729 724 718 722 716 711
TOP 536 544 553 561 569 577 585 594 602 610 618 626 634 643
K
69 BOT 560 568 578 587 596 605 614 624 633 641 650 659 668 678
TOP -4 0 0 0 0 0 0 0 0 0 0 0 0 0
Q
BOT 20 24 25 26 27 28 29 30 31 31 32 33 34 35
note 1) Dimension E applies to uppermost blocking position. For other positions, E increases accordingly.
2) Dimension Q at TOP, unless mentioned
CH - 24
51 CH - 24
Constant Hangers and Supports
5.9 Type CHB-C1, D1
K K
D
F.W
75
H
Ed
F G
A
W W
R
Ec
L
T
4-S
note 1) Dimension E applies to uppermost blocking position. For other positions, E increases accordingly.
CH - 25 52
Weight(approx.) of Constant Hanger Unit : kg
Size CHH-A1A CHH-A1 CHH-B1 CHH-B2 CHH-B1A CHH-C1 CHH-F1 CHV-LB1 CHV-LB2 CHB-C1 CHB-D1
1 11 11 11 11 11
2 12 12 12 12 12
3 12 12 12 12 12
4 17 17 17 17 17
5 17 17 17 17 17
6 18 18 18 18 18
7 18 18 18 18 18
8 26 26 26 26 26 26 26 26 26 26 32
9 27 27 27 27 27 33 33 27 27 33 33
10 28 28 28 28 28 34 34 28 28 34 34
11 29 29 29 29 29 35 35 29 29 35 35
12 29 29 29 29 29 35 35 29 29 35 35
13 58 58 58 58 58 58 58 58 58 58 64
14 58 58 58 58 58 58 58 58 58 58 64
15 61 61 61 61 61 67 67 67 67 67 67
16 61 61 61 61 61 67 67 67 67 67 67
17 44 44 48 48 48 48 48 48 48 48 52
18 44 44 48 48 48 48 48 48 48 48 52
19 51 51 51 51 51 56 56 56 56 56 56
20 51 51 51 51 51 56 56 56 56 56 56
21 55 55 55 55 55 59 59 55 55 59 59
22 55 55 55 55 55 59 59 55 55 59 59
23 60 60 60 60 60 64 64 60 60 64 64
24 60 60 60 60 60 64 64 60 60 64 64
25 66 66 66 66 66 71 71 71 71 71 71
26 66 66 66 66 66 71 71 71 71 71 71
27 63 63 63 63 63 67 67 67 67 67 67
28 63 63 63 63 63 67 67 67 67 67 67
29 130 130 130 130 130 135 135 125 125 135 140
30 130 130 130 130 130 135 135 125 125 135 140
31 135 135 135 135 135 140 140 131 131 140 145
32 135 135 135 135 135 140 140 131 131 140 145
33 143 143 143 143 143 153 153 139 139 153 153
34 143 143 143 143 143 153 153 139 139 153 153
35 144 144 148 148 148 157 157 144 144 157 153
36 144 144 148 148 148 157 157 144 144 157 153
37 203 203 210 210 210 207 207 207 207 207 225
38 203 203 210 210 210 210 210 207 207 210 225
39 214 214 225 225 225 222 222 222 222 222 240
40 214 214 225 225 225 222 222 222 222 222 240
41 227 227 234 234 234 238 238 234 234 238 252
42 227 227 234 234 234 238 238 234 234 238 252
43 237 237 244 244 244 248 248 244 244 248 262
44 237 237 244 244 244 248 248 244 244 248 262
45 249 249 259 259 259 263 263 256 256 263 273
46 249 249 259 259 259 263 263 256 256 263 273
47 507 507 516 516 516 556 556 536 536 556 560
48 507 507 516 516 516 555 555 536 536
49 533 533 542 542 542 577 577 562 562
50 533 533 542 542 542 581 581 562 562
51 538 538 546 546 546 573 573 569 569
52 538 538 546 546 546 572 572 572 572
53 557 557 570 570 570 592 592 592 592
54 562 562 570 570 570 596 596 596 596
55 588 588 596 596 596 644 644 618 618
56 588 588 596 596 596 630 630 630 630
57 619 619 630 630 630 650 650 650 650
58 623 623 630 630 630 654 654 650 650
59 656 656 663 663 663 687 687 683 683
60 656 656 663 663 663 690 690 683 683
61 815 815 829 829 855 855
62 816 816 829 829 854 854
63 879 879 893 893 919 919
64 880 880 893 893 918 918
65 1081 1099 1099 1090 1090
66 1082 1099 1099 1090 1090
67 1632 1657 1657
68 1633 1657 1657
69 1700 1726 1726
CH - 26
53 CH - 26
Constant Hangers and Supports Travel Travel
Size 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 Size
CHH Type 0.468 0.390 0.334 0.293 0.260 0.234 0.213 0.195 0.180 0.167 0.156 0.146 0.138 0.130 0.123 0.117
1 1
Selection Table 0.530 0.441 0.378 0.331 0.294 0.265 0.241 0.221 0.204 0.189 0.177 0.166 0.156 0.147 0.139 0.132
2 0.816 0.680 0.583 0.510 0.453 0.408 0.371 0.340 0.314 0.291 0.272 0.255 0.240 0.227 0.215 0.204 2
3 1.09 0.909 0.779 0.682 0.606 0.545 0.496 0.454 0.419 0.389 0.363 0.341 0.321 0.303 0.287 0.273 3
Note) 4 1.50 1.25 0.938 0.395 0.375 4
1.07 0.834 0.750 0.682 0.625 0.577 0.536 0.500 0.469 0.441 0.417
1. This table is to be 5 2.05 1.71 1.46 1.28 1.14 1.03 0.932 0.854 0.788 0.732 0.641 0.603 0.569 0.539 0.513 5
0.683
applied to select 6 2.78 2.32 1.99 1.74 1.55 1.39 1.27 1.16 1.07 0.994 0.928 0.870 0.819 0.773 0.733 0.696 6
Seonghwas stan- 7 3.48 2.90 2.49 2.18 1.94 1.74 1.58 1.45 1.34 1.24 1.16 1.09 1.02 0.968 0.917 0.871 7
dardized constant 8 4.16 3.47 2.97 2.60 2.31 2.08 1.89 1.73 1.60 1.49 1.39 1.30 1.22 1.16 1.09 1.04 8
hanger. 9 4.98 4.15 3.56 3.11 2.77 2.49 2.26 2.08 1.92 1.78 1.66 1.56 1.47 1.38 1.31 1.25 9
10 5.99 4.99 4.28 3.74 3.33 2.99 2.72 2.49 2.30 2.14 2.00 1.87 1.76 1.66 1.58 1.50 10
11 6.67 5.56 4.76 4.17 3.71 3.34 3.03 2.78 2.57 2.38 2.22 2.08 1.96 1.85 1.76 1.67 11
2. Values of this
12 7.36 6.13 5.26 4.60 4.09 3.68 3.34 3.07 2.83 2.63 2.45 2.30 2.16 2.04 1.94 1.84 12
table for the given
13 6.91 5.93 5.19 4.61 4.15 3.77 3.46 3.19 2.96 2.77 2.59 2.44 2.30 2.18 2.07 13
maximum travel
14 7.60 6.51 5.70 5.06 4.56 4.14 3.80 3.51 3.26 3.04 2.85 2.68 2.53 2.40 2.28 14
and hanger size 15 6.37 2.68 2.55 15
8.50 7.28 5.67 5.10 4.64 4.25 3.92 3.64 3.40 3.19 3.00 2.83
indicate maximum 16 9.39 8.05 7.04 6.26 5.64 5.12 4.70 4.33 4.03 3.52 3.31 3.13 2.97 2.82 16
3.76
load. 17 10.5 8.99 7.87 7.00 6.30 5.72 5.25 4.84 4.50 4.20 3.94 3.70 3.50 3.31 3.15 17
18 11.6 9.95 8.71 7.74 6.97 6.33 5.81 5.36 4.98 4.64 4.35 4.10 3.87 3.67 3.48 18
3. Load of preceding 19 12.8 11.0 9.64 8.56 7.71 7.01 6.42 5.93 5.51 5.14 4.82 4.53 4.28 4.06 3.85 19
size means 20 14.1 12.1 10.6 9.41 8.47 7.70 7.06 6.52 6.05 5.65 5.30 4.98 4.71 4.46 4.24 20
minimum load. 21 15.8 13.5 11.8 10.5 9.47 8.61 7.89 7.28 6.76 6.31 5.92 5.57 5.26 4.98 4.73 21
For example, load 22 17.0 14.6 12.8 11.3 10.2 9.27 8.50 7.85 7.29 6.80 6.38 6.00 5.67 5.37 5.10 22
23 18.7 16.0 14.0 12.5 11.2 10.2 9.35 8.63 8.01 7.48 7.01 6.60 6.23 5.91 5.61 23
range for size
24 20.4 17.5 15.3 13.6 12.2 11.1 10.2 9.42 8.74 8.16 7.65 7.20 6.80 6.44 6.12 24
37 will become
25 22.5 19.3 16.9 15.0 13.5 12.3 11.2 10.4 9.63 8.99 8.43 7.93 7.49 7.09 6.74 25
16.6 to 18.5(kN) 26 7.38 26
24.6 21.1 18.5 16.4 14.8 13.4 12.3 11.4 10.5 9.84 9.23 8.68 8.20 7.77
if maximum travel 27 27.0 23.1 20.3 18.0 16.2 14.7 13.5 12.5 11.6 10.1 9.53 9.00 8.53 8.10 27
10.8
is 240(mm). 28 29.6 25.3 22.2 19.7 17.7 16.1 14.8 13.6 12.7 11.8 11.1 10.4 9.85 9.33 8.87 28
29 24.2 21.5 19.4 17.6 16.1 14.9 13.8 12.9 12.1 11.4 10.8 10.2 9.68 29
4. Following color 30 27.0 24.0 21.6 19.6 18.0 16.6 15.4 14.4 13.5 12.7 12.0 11.4 10.8 30
codes were used. 31 30.7 27.2 24.5 22.3 20.4 18.9 17.5 16.3 15.3 14.4 13.6 12.9 12.3 31
32 33.3 29.6 26.7 24.2 22.2 20.5 19.1 17.8 16.7 15.7 14.8 14.0 13.3 32
5. Unit : mm for 33 37.0 32.9 29.6 26.9 24.7 22.8 21.2 19.7 18.5 17.4 16.5 15.6 14.8 33
34 40.7 36.2 32.6 29.6 27.1 25.0 23.3 21.7 20.4 19.2 18.1 17.1 16.3 34
travel, kN for load.
35 45.4 40.3 36.3 33.0 30.2 27.9 25.9 24.2 22.7 21.3 20.2 19.1 18.1 35
36 49.8 44.2 39.8 36.2 33.2 30.6 28.4 26.5 24.9 23.4 22.1 21.0 19.9 36
37 44.3 40.3 36.9 34.1 31.7 29.6 27.7 26.1 24.6 23.3 22.2 37
38 48.6 44.2 40.5 37.4 34.7 32.4 30.4 28.6 27.0 25.6 24.3 38
39 54.1 49.2 45.1 41.6 38.7 36.1 33.8 31.8 30.1 28.5 27.1 39
40 59.6 54.2 49.7 45.9 42.6 39.7 37.3 35.1 33.1 31.4 29.8 40
41 65.5 59.6 54.6 50.4 46.8 43.7 40.9 38.5 36.4 34.5 32.8 41
42 71.2 64.7 59.3 54.8 50.9 47.5 44.5 41.9 39.6 37.5 35.6 42
43 75.7 68.8 63.1 58.2 54.1 50.5 47.3 44.5 42.1 39.8 37.9 43
44 80.0 72.7 66.7 61.6 57.2 53.3 50.0 47.1 44.5 42.1 40.0 44
45 86.1 78.3 71.8 66.2 61.5 57.4 53.8 50.6 47.8 45.3 43.1 45
46 92.2 83.8 76.8 70.9 65.8 61.5 57.6 54.2 51.2 48.5 46.1 46
47 91.6 84.0 77.5 72.0 67.2 63.0 59.3 56.0 53.1 50.4 47
48 99.8 91.5 84.5 78.5 73.2 68.6 64.6 61.0 57.8 54.9 48
49 107.7 98.7 91.1 84.6 79.0 74.0 69.7 65.8 62.3 59.2 49
CHH A1 50 115.7 106.1 97.9 90.9 84.9 79.6 74.9 70.7 67.0 63.6 50
A 1A 51 125.7 115.2 106.4 98.8 92.2 86.4 81.3 76.8 72.8 69.1 51
B1 52 135.9 124.5 115.0 106.8 99.6 93.4 87.9 83.0 78.7 74.7 52
B1A 53 147.6 135.3 124.9 116.0 108.3 101.5 95.5 90.2 85.5 81.2 53
54 159.2 146.0 134.7 125.1 116.8 109.5 103.0 97.3 92.2 87.6 54
CHH B2
55 170.3 156.1 144.1 133.8 124.9 117.1 110.2 104.1 98.6 93.7 55
C1, F1
56 181.9 166.7 153.9 142.9 133.4 125.0 117.7 111.1 105.3 100.0 56
57 193.8 177.7 164.0 152.3 142.1 133.3 125.4 118.4 112.2 106.6 57
CHV LB1 58 206.5 189.3 151.4 142.0 133.6 126.2 119.5 113.6 58
174.7 162.2
LB2 59 221.1 202.7 187.1 173.7 162.1 152.0 143.1 135.1 128.0 121.6 59
60 235.4 215.8 199.2 184.9 172.6 161.8 152.3 143.8 136.3 129.5 60
CHB C1 61 217.0 201.5 188.0 176.3 165.9 156.7 148.4 141.0 61
D1 62 237.8 220.8 206.1 193.2 181.8 171.7 162.7 154.6 62
63 260.7 242.1 225.9 211.8 199.4 188.3 178.4 169.5 63
Refer to other 64 289.5 268.8 250.9 235.2 221.4 209.1 198.1 188.2 64
sheets for 65 210.6
CHV and CHB 65
66 235.0 66
67 266.1 67
68 296.6 68
69 320.7 69
Size Size
Travel
50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 Travel
CH - 27 54
Travel Travel
Size 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400 Size
0.111 0.106 0.102 0.098 0.094 0.090 0.087 0.084 0.081 0.078 0.076 0.073 0.071 0.069 0.067 0.065 0.063 0.062 0.060 0.059
1 1
0.126 0.120 0.115 0.110 0.106 0.102 0.098 0.095 0.091 0.088 0.085 0.083 0.080 0.078 0.076 0.074 0.072 0.070 0.068 0.066
2 0.194 0.185 0.177 0.170 0.163 0.157 0.151 0.146 0.141 0.136 0.132 0.128 0.124 0.120 0.117 0.113 0.110 0.107 0.105 0.102 2
3 0.260 0.248 0.237 0.227 0.218 0.210 0.202 0.195 0.188 0.182 0.176 0.170 0.165 0.160 0.156 0.151 0.147 0.143 0.140 0.136 3
4 0.357 0.341 0.326 0.313 0.300 0.289 0.278 0.268 0.259 0.250 0.242 0.234 0.227 0.221 0.214 0.208 0.203 0.197 0.192 0.188 4
5 0.488 0.466 0.446 0.427 0.410 0.394 0.380 0.366 0.353 0.342 0.331 0.320 0.311 0.301 0.293 0.285 0.277 0.270 0.263 0.256 5
6 0.663 0.633 0.605 0.580 0.557 0.535 0.516 0.497 0.480 0.464 0.449 0.435 0.422 0.409 0.398 0.387 0.376 0.366 0.357 0.348 6
7 0.830 0.792 0.757 0.726 0.697 0.670 0.645 0.622 0.601 0.581 0.562 0.544 0.528 0.512 0.498 0.484 0.471 0.458 0.447 0.436 7
8 0.990 0.945 0.904 0.866 0.832 0.800 0.770 0.743 0.717 0.693 0.671 0.650 0.630 0.611 0.594 0.578 0.562 0.547 0.533 0.520 8
9 1.19 1.13 1.08 1.04 0.996 0.958 0.923 0.890 0.859 0.830 0.804 0.778 0.755 0.733 0.712 0.692 0.673 0.656 0.639 0.623 9
10 1.43 1.36 1.30 1.25 1.20 1.15 1.11 1.07 1.03 0.998 0.965 0.935 0.907 0.880 0.855 0.831 0.809 0.788 0.767 0.748 10
11 1.59 1.52 1.45 1.39 1.33 1.28 1.24 1.19 1.15 1.11 1.08 1.04 1.01 0.981 0.953 0.926 0.901 0.878 0.855 0.834 11
12 1.75 1.67 1.60 1.53 1.47 1.42 1.36 1.31 1.27 1.23 1.19 1.15 1.11 1.08 1.05 1.02 0.994 0.968 0.943 0.920 12
13 1.98 1.89 1.80 1.73 1.66 1.60 1.54 1.48 1.43 1.38 13
14 2.17 2.07 1.98 1.90 1.82 1.75 1.69 1.63 1.57 1.52 14
15 2.43 2.32 2.22 2.12 2.04 1.96 1.89 1.82 1.76 1.70 15
16 2.68 2.56 2.45 2.35 2.25 2.17 2.09 2.01 1.94 1.88 16
17 3.00 2.86 2.74 2.62 2.52 2.42 2.33 2.25 2.17 2.10 17
18 3.32 3.17 3.03 2.90 2.79 2.68 2.58 2.49 2.40 2.32 18
19 3.67 3.50 3.35 3.21 3.08 2.96 2.85 2.75 2.66 2.57 19
20 4.03 3.85 3.68 3.53 3.39 3.26 3.14 3.03 2.92 2.82 20
21 4.51 4.30 4.12 3.95 3.79 3.64 3.51 3.38 3.27 3.16 21
22 4.86 4.64 4.43 4.25 4.08 3.92 3.78 3.64 3.52 3.40 22
23 5.34 5.10 4.88 4.68 4.49 4.32 4.16 4.01 3.87 3.74 23
24 5.83 5.56 5.32 5.10 4.90 4.71 4.53 4.37 4.22 4.08 24
25 6.42 6.13 5.86 5.62 5.39 5.18 4.99 4.81 4.65 4.49 25
26 7.03 6.71 6.42 6.15 5.90 5.68 5.47 5.27 5.09 4.92 26
27 7.71 7.36 7.04 6.75 6.48 6.23 6.00 5.79 5.59 5.40 27
28 8.44 8.06 7.71 7.39 7.09 6.82 6.57 6.33 6.11 5.91 5.72 5.54 5.37 5.21 5.07 4.93 4.79 4.67 4.55 4.43 28
29 9.22 8.80 8.42 8.07 7.74 7.45 7.17 6.91 6.68 6.45 6.25 6.05 5.87 5.69 5.53 5.38 5.23 5.09 4.96 4.84 29
30 10.3 9.80 9.38 8.99 8.63 8.30 7.99 7.70 7.44 7.19 6.96 6.74 6.54 6.34 6.16 5.99 5.83 5.68 5.53 5.39 30
31 11.7 11.1 10.7 10.2 9.81 9.43 9.08 8.76 8.46 8.17 7.91 7.66 7.43 7.21 7.01 6.81 6.63 6.45 6.29 6.13 31
32 12.7 12.1 11.6 11.1 10.7 10.3 9.88 9.53 9.20 8.89 8.60 8.33 8.08 7.84 7.62 7.41 7.21 7.02 6.84 6.67 32
33 14.1 13.5 12.9 12.3 11.8 11.4 11.0 10.6 10.2 9.87 9.55 9.26 8.98 8.71 8.46 8.23 8.01 7.79 7.59 7.41 33
34 15.5 14.8 14.2 13.6 13.0 12.5 12.1 11.6 11.2 10.9 10.5 10.2 9.87 9.58 9.30 9.04 8.80 8.57 8.35 8.14 34
35 17.3 16.5 15.8 15.1 14.5 14.0 13.4 13.0 12.5 12.1 11.7 11.3 11.0 10.7 10.4 10.1 9.81 9.55 9.30 9.07 35
36 19.0 18.1 17.3 16.6 15.9 15.3 14.7 14.2 13.7 13.3 12.8 12.4 12.1 11.7 11.4 11.1 10.8 10.5 10.2 9.95 36
37 21.1 20.2 19.3 18.5 17.7 17.1 16.4 15.8 15.3 14.8 14.3 13.9 13.4 13.0 12.7 12.3 12.0 11.7 11.4 11.1 37
38 23.2 22.1 21.1 20.3 19.5 18.7 18.0 17.4 16.8 16.2 15.7 15.2 14.7 14.3 13.9 13.5 13.1 12.8 12.5 12.2 38
39 25.8 24.6 23.5 22.6 21.7 20.8 20.0 19.3 18.7 18.0 17.5 16.9 16.4 15.9 15.5 15.0 14.6 14.2 13.9 13.5 39
40 28.4 27.1 25.9 24.8 23.8 22.9 22.1 21.3 20.6 19.9 19.2 18.6 18.1 17.5 17.0 16.6 16.1 15.7 15.3 14.9 40
41 31.2 29.8 28.5 27.3 26.2 25.2 24.3 23.4 22.6 21.8 21.1 20.5 19.9 19.3 18.7 18.2 17.7 17.2 16.8 16.4 41
42 33.9 32.4 31.0 29.7 28.5 27.4 26.4 25.4 24.6 23.7 23.0 22.3 21.6 20.9 20.3 19.8 19.2 18.7 18.3 17.8 42
43 36.1 34.4 32.9 31.5 30.3 29.1 28.0 27.0 26.1 25.2 24.4 23.7 22.9 22.3 21.6 21.0 20.5 19.9 19.4 18.9 43
44 38.1 36.4 34.8 33.3 32.0 30.8 29.6 28.6 27.6 26.7 25.8 25.0 24.2 23.5 22.9 22.2 21.6 21.1 20.5 20.0 44
45 41.0 39.1 37.4 35.9 34.4 33.1 31.9 30.8 29.7 28.7 27.8 26.9 26.1 25.3 24.6 23.9 23.3 22.7 22.1 21.5 45
46 43.9 41.9 40.1 38.4 36.9 35.5 34.1 32.9 31.8 30.7 29.7 28.8 27.9 27.1 26.3 25.6 24.9 24.3 23.6 23.0 46
47 48.0 45.8 43.8 42.0 40.3 38.8 37.3 36.0 34.8 33.6 32.5 31.5 30.5 29.7 28.8 28.0 27.2 26.5 25.8 25.2 47
48 52.3 49.9 47.8 45.8 43.9 42.2 40.7 39.2 37.9 36.6 35.4 34.3 33.3 32.3 31.4 30.5 29.7 28.9 28.2 27.5 48
49 56.4 53.8 51.5 49.4 47.4 45.6 43.9 42.3 40.8 39.5 38.2 37.0 35.9 34.8 33.8 32.9 32.0 31.2 30.4 29.6 49
50 60.6 57.9 55.3 53.0 50.9 49.0 47.1 45.5 43.9 42.4 41.1 39.8 38.6 37.4 36.4 35.4 34.4 33.5 32.6 31.8 50
51 65.8 62.9 60.1 57.6 55.3 53.2 51.2 49.4 47.7 46.1 44.6 43.2 41.9 40.7 39.5 38.4 37.4 36.4 35.5 34.6 51
52 71.2 67.9 65.0 62.3 59.8 57.5 55.4 53.4 51.5 49.8 48.2 46.7 45.3 44.0 42.7 41.5 40.4 39.3 38.3 37.4 52
53 77.3 73.8 70.6 67.7 65.0 62.5 60.1 58.0 56.0 54.1 52.4 50.8 49.2 47.8 46.4 45.1 43.9 42.7 41.6 40.6 53
54 83.4 79.6 76.2 73.0 70.1 67.4 64.9 62.6 60.4 58.4 56.5 54.7 53.1 51.5 50.0 48.7 47.3 46.1 44.9 43.8 54
55 89.2 85.1 81.4 78.0 74.9 72.0 69.4 66.9 64.6 62.4 60.4 58.5 56.8 55.1 53.5 52.0 50.6 49.3 48.0 46.8 55
56 95.3 90.9 87.0 83.4 80.0 76.9 74.1 71.5 69.0 66.7 64.5 62.5 60.6 58.8 57.2 55.6 54.1 52.6 51.3 50.0 56
57 101.5 96.9 92.7 88.8 85.3 82.0 79.0 76.1 73.5 71.1 68.8 66.6 64.6 62.7 60.9 59.2 57.6 56.1 54.7 53.3 57
58 108.2 103.2 98.7 94.6 90.8 87.4 84.1 81.1 78.3 75.7 73.3 71.0 68.8 66.8 64.9 63.1 61.4 59.8 58.2 56.8 58
59 115.8 110.5 105.7 101.3 97.3 93.5 90.1 86.9 83.9 81.1 78.5 76.0 73.7 71.5 69.5 67.6 65.7 64.0 62.4 60.8 59
60 123.3 117.7 112.6 107.9 103.6 99.6 95.9 92.5 89.3 86.3 83.5 80.9 78.5 76.1 74.0 71.9 70.0 68.1 66.4 64.7 60
61 134.3 128.2 122.6 117.5 112.8 108.5 104.5 100.7 97.3 94.0 91.0 88.1 85.5 83.0 80.6 78.3 76.2 74.2 72.3 70.5 61
62 147.2 140.5 134.4 128.8 123.6 118.9 114.5 110.4 106.6 103.0 99.7 96.6 93.7 90.9 88.3 85.9 83.5 81.3 79.3 77.3 62
63 161.4 154.1 147.4 141.2 135.6 130.4 125.5 121.0 116.9 113.0 109.3 105.9 102.7 99.7 96.8 94.1 91.6 89.2 86.9 84.7 63
64 179.2 171.1 163.6 156.8 150.6 144.8 139.4 134.4 129.8 125.5 121.4 117.6 114.1 110.7 107.5 104.6 101.7 99.0 96.5 94.1 64
65 200.6 191.5 183.2 175.5 168.5 162.0 156.0 150.5 145.3 140.4 135.9 131.7 127.7 123.9 120.4 117.0 113.9 110.9 108.0 105.3 65
66 223.8 213.6 204.3 195.8 188.0 180.7 174.0 167.8 162.0 156.6 151.6 146.9 142.4 138.2 134.3 130.5 127.0 123.7 120.5 117.5 66
67 253.4 241.9 231.4 221.7 212.8 204.7 197.1 190.0 183.5 177.4 171.6 166.3 161.2 156.5 152.0 147.8 143.8 140.0 136.4 133.0 67
68 282.4 269.6 257.9 247.1 237.2 228.1 219.7 211.8 204.5 197.7 191.3 185.3 179.7 174.4 169.5 164.8 160.3 156.1 152.1 148.3 68
69 305.4 291.5 278.8 267.2 256.5 246.7 237.5 229.1 221.2 213.8 206.9 200.4 194.3 188.6 183.2 178.2 173.3 168.8 164.4 160.3 69
Size Size
Travel
210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400 Travel
55 CH - 28
Constant Hangers and Supports Travel Travel
Size 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 Size
CHV Type 0.468 0.390 0.334 0.293 0.260 0.234 0.213 0.195 0.180 0.167 0.156 0.146 0.138 0.130 0.123 0.117
1 1
Selection Table 0.530 0.441 0.378 0.331 0.294 0.265 0.241 0.221 0.204 0.189 0.177 0.166 0.156 0.147 0.139 0.132
2 0.816 0.680 0.583 0.510 0.453 0.408 0.371 0.340 0.314 0.291 0.272 0.255 0.240 0.227 0.215 0.204 2
3 1.09 0.909 0.779 0.682 0.606 0.545 0.496 0.454 0.419 0.389 0.363 0.341 0.321 0.303 0.287 0.273 3
Note) 4 1.50 1.25 0.395 0.375 4
1.07 0.938 0.834 0.750 0.682 0.625 0.577 0.536 0.500 0.469 0.441 0.417
1. This table is to be 5 2.05 1.71 1.46 1.28 1.14 1.03 0.932 0.854 0.788 0.683 0.641 0.603 0.569 0.539 0.513 5
0.732
applied to select 6 2.78 2.32 1.99 1.74 1.55 1.39 1.27 1.16 1.07 0.994 0.928 0.870 0.819 0.773 0.733 0.696 6
Seonghwas stan- 7 3.48 2.90 2.49 2.18 1.94 1.74 1.58 1.45 1.34 1.24 1.16 1.09 1.02 0.968 0.917 0.871 7
dardized constant 8 4.16 3.47 2.97 2.60 2.31 2.08 1.89 1.73 1.60 1.49 1.39 1.30 1.22 1.16 1.09 1.04 8
hanger. 9 4.98 4.15 3.56 3.11 2.77 2.49 2.26 2.08 1.92 1.78 1.66 1.56 1.47 1.38 1.31 1.25 9
10 5.99 4.99 4.28 3.74 3.33 2.99 2.72 2.49 2.30 2.14 2.00 1.87 1.76 1.66 1.58 1.50 10
11 6.67 5.56 4.76 4.17 3.71 3.34 3.03 2.78 2.57 2.38 2.22 2.08 1.96 1.85 1.76 1.67 11
2. Values of this
12 7.36 6.13 5.26 4.60 4.09 3.68 3.34 3.07 2.83 2.63 2.45 2.30 2.16 2.04 1.94 1.84 12
table for the given
13 6.91 5.93 5.19 4.61 4.15 3.77 3.46 3.19 2.96 2.77 2.59 2.44 2.30 2.18 2.07 13
maximum travel
14 7.60 6.51 5.70 5.06 4.56 4.14 3.80 3.51 3.26 3.04 2.85 2.68 2.53 2.40 2.28 14
and hanger size 15 2.68 2.55 15
8.50 7.28 6.37 5.67 5.10 4.64 4.25 3.92 3.64 3.40 3.19 3.00 2.83
indicate maximum 16 9.39 8.05 7.04 6.26 5.64 5.12 4.70 4.33 3.76 3.52 3.31 3.13 2.97 2.82 16
4.03
load. 17 10.5 8.99 7.87 7.00 6.30 5.72 5.25 4.84 4.50 4.20 3.94 3.70 3.50 3.31 3.15 17
18 11.6 9.95 8.71 7.74 6.97 6.33 5.81 5.36 4.98 4.64 4.35 4.10 3.87 3.67 3.48 18
3. Load of preceding 19 12.8 11.0 9.64 8.56 7.71 7.01 6.42 5.93 5.51 5.14 4.82 4.53 4.28 4.06 3.85 19
size means 20 14.1 12.1 10.6 9.41 8.47 7.70 7.06 6.52 6.05 5.65 5.30 4.98 4.71 4.46 4.24 20
minimum load. 21 15.8 13.5 11.8 10.5 9.47 8.61 7.89 7.28 6.76 6.31 5.92 5.57 5.26 4.98 4.73 21
For example, load 22 17.0 14.6 12.8 11.3 10.2 9.27 8.50 7.85 7.29 6.80 6.38 6.00 5.67 5.37 5.10 22
23 18.7 16.0 14.0 12.5 11.2 10.2 9.35 8.63 8.01 7.48 7.01 6.60 6.23 5.91 5.61 23
range for size
24 20.4 17.5 15.3 13.6 12.2 11.1 10.2 9.42 8.74 8.16 7.65 7.20 6.80 6.44 6.12 24
37 will become
25 22.5 19.3 16.9 15.0 13.5 12.3 11.2 10.4 9.63 8.99 8.43 7.93 7.49 7.09 6.74 25
16.6 to 18.5(kN) 26 10.5 7.38 26
24.6 21.1 18.5 16.4 14.8 13.4 12.3 11.4 9.84 9.23 8.68 8.20 7.77
if maximum travel 27 27.0 23.1 20.3 18.0 16.2 14.7 13.5 12.5 11.6 10.8 10.1 9.53 9.00 8.53 8.10 27
is 240(mm). 28 29.6 25.3 22.2 19.7 17.7 16.1 14.8 13.6 12.7 11.8 11.1 10.4 9.85 9.33 8.87 28
29 24.2 21.5 19.4 17.6 16.1 14.9 13.8 12.9 12.1 11.4 10.8 10.2 9.68 29
4. Following color 30 27.0 24.0 21.6 19.6 18.0 16.6 15.4 14.4 13.5 12.7 12.0 11.4 10.8 30
codes were used. 31 30.7 27.2 24.5 22.3 20.4 18.9 17.5 16.3 15.3 14.4 13.6 12.9 12.3 31
32 33.3 29.6 26.7 24.2 22.2 20.5 19.1 17.8 16.7 15.7 14.8 14.0 13.3 32
5. Unit : mm for 33 37.0 32.9 29.6 26.9 24.7 22.8 21.2 19.7 18.5 17.4 16.5 15.6 14.8 33
34 40.7 36.2 32.6 29.6 27.1 25.0 23.3 21.7 20.4 19.2 18.1 17.1 16.3 34
travel, kN for load.
35 45.4 40.3 36.3 33.0 30.2 27.9 25.9 24.2 22.7 21.3 20.2 19.1 18.1 35
36 49.8 44.2 39.8 36.2 33.2 30.6 28.4 26.5 24.9 23.4 22.1 21.0 19.9 36
37 44.3 40.3 36.9 34.1 31.7 29.6 27.7 26.1 24.6 23.3 22.2 37
38 48.6 44.2 40.5 37.4 34.7 32.4 30.4 28.6 27.0 25.6 24.3 38
39 54.1 49.2 45.1 41.6 38.7 36.1 33.8 31.8 30.1 28.5 27.1 39
40 59.6 54.2 49.7 45.9 42.6 39.7 37.3 35.1 33.1 31.4 29.8 40
41 65.5 59.6 54.6 50.4 46.8 43.7 40.9 38.5 36.4 34.5 32.8 41
42 71.2 64.7 59.3 54.8 50.9 47.5 44.5 41.9 39.6 37.5 35.6 42
43 75.7 68.8 63.1 58.2 54.1 50.5 47.3 44.5 42.1 39.8 37.9 43
44 80.0 72.7 66.7 61.6 57.2 53.3 50.0 47.1 44.5 42.1 40.0 44
45 86.1 78.3 71.8 66.2 61.5 57.4 53.8 50.6 47.8 45.3 43.1 45
46 92.2 83.8 76.8 70.9 65.8 61.5 57.6 54.2 51.2 48.5 46.1 46
47 91.6 84.0 77.5 72.0 67.2 63.0 59.3 56.0 53.1 50.4 47
48 99.8 91.5 84.5 78.5 73.2 68.6 64.6 61.0 57.8 54.9 48
49 107.7 98.7 91.1 84.6 79.0 74.0 69.7 65.8 62.3 59.2 49
50 115.7 106.1 97.9 90.9 84.9 79.6 74.9 70.7 67.0 63.6 50
CHH A1
51 125.7 115.2 106.4 98.8 92.2 86.4 81.3 76.8 72.8 69.1 51
A 1A
52 135.9 124.5 115.0 106.8 99.6 93.4 87.9 83.0 78.7 74.7 52
B1
53 147.6 135.3 124.9 116.0 108.3 101.5 95.5 90.2 85.5 81.2 53
B1A 54 125.1 116.8 92.2 87.6 54
159.2 146.0 134.7 109.5 103.0 97.3
CHH B2 55 170.3 156.1 144.1 133.8 124.9 117.1 110.2 104.1 98.6 93.7 55
C1, F1 56 181.9 166.7 153.9 142.9 133.4 125.0 117.7 111.1 105.3 100.0 56
57 193.8 177.7 164.0 152.3 142.1 133.3 125.4 118.4 112.2 106.6 57
58 206.5 189.3 174.7 162.2 151.4 142.0 133.6 126.2 119.5 113.6 58
59 221.1 202.7 187.1 173.7 162.1 152.0 143.1 135.1 128.0 121.6 59
CHV LB1 60 235.4 215.8 199.2 184.9 172.6 161.8 152.3 143.8 136.3 129.5 60
61 217.0 201.5 188.0 176.3 165.9 156.7 148.4 141.0 61
LB2
62 237.8 220.8 206.1 193.2 181.8 171.7 162.7 154.6 62
63 260.7 242.1 225.9 211.8 199.4 188.3 178.4 169.5 63
CHB C1
64 289.5 268.8 250.9 235.2 221.4 209.1 198.1 188.2 64
D1 65 210.6 65
66 235.0 66
Refer to
other sheets 67 266.1 67
for CHH and 68 296.6 68
CHB
69 320.7 69
Size Size
Travel
50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 Travel
CH - 29 56
Travel Travel
Size 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400 Size
0.111 0.106 0.102 0.098 0.094 0.090 0.087 0.084 0.081 0.078 0.076 0.073 0.071 0.069 0.067 0.065 0.063 0.062 0.060 0.059
1 1
0.126 0.120 0.115 0.110 0.106 0.102 0.098 0.095 0.091 0.088 0.085 0.083 0.080 0.078 0.076 0.074 0.072 0.070 0.068 0.066
2 0.194 0.185 0.177 0.170 0.163 0.157 0.151 0.146 0.141 0.136 0.132 0.128 0.124 0.120 0.117 0.113 0.110 0.107 0.105 0.102 2
3 0.260 0.248 0.237 0.227 0.218 0.210 0.202 0.195 0.188 0.182 0.176 0.170 0.165 0.160 0.156 0.151 0.147 0.143 0.140 0.136 3
4 0.357 0.341 0.326 0.313 0.300 0.289 0.278 0.268 0.259 0.250 0.242 0.234 0.227 0.221 0.214 0.208 0.203 0.197 0.192 0.188 4
5 0.488 0.466 0.446 0.427 0.410 0.394 0.380 0.366 0.353 0.342 0.331 0.320 0.311 0.301 0.293 0.285 0.277 0.270 0.263 0.256 5
6 0.663 0.633 0.605 0.580 0.557 0.535 0.516 0.497 0.480 0.464 0.449 0.435 0.422 0.409 0.398 0.387 0.376 0.366 0.357 0.348 6
7 0.830 0.792 0.757 0.726 0.697 0.670 0.645 0.622 0.601 0.581 0.562 0.544 0.528 0.512 0.498 0.484 0.471 0.458 0.447 0.436 7
8 0.990 0.945 0.904 0.866 0.832 0.800 0.770 0.743 0.717 0.693 0.671 0.650 0.630 0.611 0.594 0.578 0.562 0.547 0.533 0.520 8
9 1.19 1.13 1.08 1.04 0.996 0.958 0.923 0.890 0.859 0.830 0.804 0.778 0.755 0.733 0.712 0.692 0.673 0.656 0.639 0.623 9
10 1.43 1.36 1.30 1.25 1.20 1.15 1.11 1.07 1.03 0.998 0.965 0.935 0.907 0.880 0.855 0.831 0.809 0.788 0.767 0.748 10
11 1.59 1.52 1.45 1.39 1.33 1.28 1.24 1.19 1.15 1.11 1.08 1.04 1.01 0.981 0.953 0.926 0.901 0.878 0.855 0.834 11
12 1.75 1.67 1.60 1.53 1.47 1.42 1.36 1.31 1.27 1.23 1.19 1.15 1.11 1.08 1.05 1.02 0.994 0.968 0.943 0.920 12
13 1.98 1.89 1.80 1.73 1.66 1.60 1.54 1.48 1.43 1.38 13
14 2.17 2.07 1.98 1.90 1.82 1.75 1.69 1.63 1.57 1.52 14
15 2.43 2.32 2.22 2.12 2.04 1.96 1.89 1.82 1.76 1.70 15
16 2.68 2.56 2.45 2.35 2.25 2.17 2.09 2.01 1.94 1.88 16
17 3.00 2.86 2.74 2.62 2.52 2.42 2.33 2.25 2.17 2.10 17
18 3.32 3.17 3.03 2.90 2.79 2.68 2.58 2.49 2.40 2.32 18
19 3.67 3.50 3.35 3.21 3.08 2.96 2.85 2.75 2.66 2.57 19
20 4.03 3.85 3.68 3.53 3.39 3.26 3.14 3.03 2.92 2.82 20
21 4.51 4.30 4.12 3.95 3.79 3.64 3.51 3.38 3.27 3.16 21
22 4.86 4.64 4.43 4.25 4.08 3.92 3.78 3.64 3.52 3.40 22
23 5.34 5.10 4.88 4.68 4.49 4.32 4.16 4.01 3.87 3.74 23
24 5.83 5.56 5.32 5.10 4.90 4.71 4.53 4.37 4.22 4.08 24
25 6.42 6.13 5.86 5.62 5.39 5.18 4.99 4.81 4.65 4.49 25
26 7.03 6.71 6.42 6.15 5.90 5.68 5.47 5.27 5.09 4.92 26
27 7.71 7.36 7.04 6.75 6.48 6.23 6.00 5.79 5.59 5.40 27
28 8.44 8.06 7.71 7.39 7.09 6.82 6.57 6.33 6.11 5.91 5.72 5.54 5.37 5.21 5.07 4.93 4.79 4.67 4.55 4.43 28
29 9.22 8.80 8.42 8.07 7.74 7.45 7.17 6.91 6.68 6.45 6.25 6.05 5.87 5.69 5.53 5.38 5.23 5.09 4.96 4.84 29
30 10.3 9.80 9.38 8.99 8.63 8.30 7.99 7.70 7.44 7.19 6.96 6.74 6.54 6.34 6.16 5.99 5.83 5.68 5.53 5.39 30
31 11.7 11.1 10.7 10.2 9.81 9.43 9.08 8.76 8.46 8.17 7.91 7.66 7.43 7.21 7.01 6.81 6.63 6.45 6.29 6.13 31
32 12.7 12.1 11.6 11.1 10.7 10.3 9.88 9.53 9.20 8.89 8.60 8.33 8.08 7.84 7.62 7.41 7.21 7.02 6.84 6.67 32
33 14.1 13.5 12.9 12.3 11.8 11.4 11.0 10.6 10.2 9.87 9.55 9.26 8.98 8.71 8.46 8.23 8.01 7.79 7.59 7.41 33
34 15.5 14.8 14.2 13.6 13.0 12.5 12.1 11.6 11.2 10.9 10.5 10.2 9.87 9.58 9.30 9.04 8.80 8.57 8.35 8.14 34
35 17.3 16.5 15.8 15.1 14.5 14.0 13.4 13.0 12.5 12.1 11.7 11.3 11.0 10.7 10.4 10.1 9.81 9.55 9.30 9.07 35
36 19.0 18.1 17.3 16.6 15.9 15.3 14.7 14.2 13.7 13.3 12.8 12.4 12.1 11.7 11.4 11.1 10.8 10.5 10.2 9.95 36
37 21.1 20.2 19.3 18.5 17.7 17.1 16.4 15.8 15.3 14.8 14.3 13.9 13.4 13.0 12.7 12.3 12.0 11.7 11.4 11.1 37
38 23.2 22.1 21.1 20.3 19.5 18.7 18.0 17.4 16.8 16.2 15.7 15.2 14.7 14.3 13.9 13.5 13.1 12.8 12.5 12.2 38
39 25.8 24.6 23.5 22.6 21.7 20.8 20.0 19.3 18.7 18.0 17.5 16.9 16.4 15.9 15.5 15.0 14.6 14.2 13.9 13.5 39
40 28.4 27.1 25.9 24.8 23.8 22.9 22.1 21.3 20.6 19.9 19.2 18.6 18.1 17.5 17.0 16.6 16.1 15.7 15.3 14.9 40
41 31.2 29.8 28.5 27.3 26.2 25.2 24.3 23.4 22.6 21.8 21.1 20.5 19.9 19.3 18.7 18.2 17.7 17.2 16.8 16.4 41
42 33.9 32.4 31.0 29.7 28.5 27.4 26.4 25.4 24.6 23.7 23.0 22.3 21.6 20.9 20.3 19.8 19.2 18.7 18.3 17.8 42
43 36.1 34.4 32.9 31.5 30.3 29.1 28.0 27.0 26.1 25.2 24.4 23.7 22.9 22.3 21.6 21.0 20.5 19.9 19.4 18.9 43
44 38.1 36.4 34.8 33.3 32.0 30.8 29.6 28.6 27.6 26.7 25.8 25.0 24.2 23.5 22.9 22.2 21.6 21.1 20.5 20.0 44
45 41.0 39.1 37.4 35.9 34.4 33.1 31.9 30.8 29.7 28.7 27.8 26.9 26.1 25.3 24.6 23.9 23.3 22.7 22.1 21.5 45
46 43.9 41.9 40.1 38.4 36.9 35.5 34.1 32.9 31.8 30.7 29.7 28.8 27.9 27.1 26.3 25.6 24.9 24.3 23.6 23.0 46
47 48.0 45.8 43.8 42.0 40.3 38.8 37.3 36.0 34.8 33.6 32.5 31.5 30.5 29.7 28.8 28.0 27.2 26.5 25.8 25.2 47
48 52.3 49.9 47.8 45.8 43.9 42.2 40.7 39.2 37.9 36.6 35.4 34.3 33.3 32.3 31.4 30.5 29.7 28.9 28.2 27.5 48
49 56.4 53.8 51.5 49.4 47.4 45.6 43.9 42.3 40.8 39.5 38.2 37.0 35.9 34.8 33.8 32.9 32.0 31.2 30.4 29.6 49
50 60.6 57.9 55.3 53.0 50.9 49.0 47.1 45.5 43.9 42.4 41.1 39.8 38.6 37.4 36.4 35.4 34.4 33.5 32.6 31.8 50
51 65.8 62.9 60.1 57.6 55.3 53.2 51.2 49.4 47.7 46.1 44.6 43.2 41.9 40.7 39.5 38.4 37.4 36.4 35.5 34.6 51
52 71.2 67.9 65.0 62.3 59.8 57.5 55.4 53.4 51.5 49.8 48.2 46.7 45.3 44.0 42.7 41.5 40.4 39.3 38.3 37.4 52
53 77.3 73.8 70.6 67.7 65.0 62.5 60.1 58.0 56.0 54.1 52.4 50.8 49.2 47.8 46.4 45.1 43.9 42.7 41.6 40.6 53
54 83.4 79.6 76.2 73.0 70.1 67.4 64.9 62.6 60.4 58.4 56.5 54.7 53.1 51.5 50.0 48.7 47.3 46.1 44.9 43.8 54
55 89.2 85.1 81.4 78.0 74.9 72.0 69.4 66.9 64.6 62.4 60.4 58.5 56.8 55.1 53.5 52.0 50.6 49.3 48.0 46.8 55
56 95.3 90.9 87.0 83.4 80.0 76.9 74.1 71.5 69.0 66.7 64.5 62.5 60.6 58.8 57.2 55.6 54.1 52.6 51.3 50.0 56
57 101.5 96.9 92.7 88.8 85.3 82.0 79.0 76.1 73.5 71.1 68.8 66.6 64.6 62.7 60.9 59.2 57.6 56.1 54.7 53.3 57
58 108.2 103.2 98.7 94.6 90.8 87.4 84.1 81.1 78.3 75.7 73.3 71.0 68.8 66.8 64.9 63.1 61.4 59.8 58.2 56.8 58
59 115.8 110.5 105.7 101.3 97.3 93.5 90.1 86.9 83.9 81.1 78.5 76.0 73.7 71.5 69.5 67.6 65.7 64.0 62.4 60.8 59
60 123.3 117.7 112.6 107.9 103.6 99.6 95.9 92.5 89.3 86.3 83.5 80.9 78.5 76.1 74.0 71.9 70.0 68.1 66.4 64.7 60
61 134.3 128.2 122.6 117.5 112.8 108.5 104.5 100.7 97.3 94.0 91.0 88.1 85.5 83.0 80.6 78.3 76.2 74.2 72.3 70.5 61
62 147.2 140.5 134.4 128.8 123.6 118.9 114.5 110.4 106.6 103.0 99.7 96.6 93.7 90.9 88.3 85.9 83.5 81.3 79.3 77.3 62
63 161.4 154.1 147.4 141.2 135.6 130.4 125.5 121.0 116.9 113.0 109.3 105.9 102.7 99.7 96.8 94.1 91.6 89.2 86.9 84.7 63
64 179.2 171.1 163.6 156.8 150.6 144.8 139.4 134.4 129.8 125.5 121.4 117.6 114.1 110.7 107.5 104.6 101.7 99.0 96.5 94.1 64
65 200.6 191.5 183.2 175.5 168.5 162.0 156.0 150.5 145.3 140.4 135.9 131.7 127.7 123.9 120.4 117.0 113.9 110.9 108.0 105.3 65
66 223.8 213.6 204.3 195.8 188.0 180.7 174.0 167.8 162.0 156.6 151.6 146.9 142.4 138.2 134.3 130.5 127.0 123.7 120.5 117.5 66
67 253.4 241.9 231.4 221.7 212.8 204.7 197.1 190.0 183.5 177.4 171.6 166.3 161.2 156.5 152.0 147.8 143.8 140.0 136.4 133.0 67
68 282.4 269.6 257.9 247.1 237.2 228.1 219.7 211.8 204.5 197.7 191.3 185.3 179.7 174.4 169.5 164.8 160.3 156.1 152.1 148.3 68
69 305.4 291.5 278.8 267.2 256.5 246.7 237.5 229.1 221.2 213.8 206.9 200.4 194.3 188.6 183.2 178.2 173.3 168.8 164.4 160.3 69
Size Size
Travel
210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400 Travel
57 CH - 30
Constant Hangers and Supports Travel Travel
Size 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 Size
CHB Type 0.468 0.390 0.334 0.293 0.260 0.234 0.213 0.195 0.180 0.167 0.156 0.146 0.138 0.130 0.123 0.117
1 1
Selection Table 0.530 0.441 0.378 0.331 0.294 0.265 0.241 0.221 0.204 0.189 0.177 0.166 0.156 0.147 0.139 0.132
2 0.816 0.680 0.583 0.510 0.453 0.408 0.371 0.340 0.314 0.291 0.272 0.255 0.240 0.227 0.215 0.204 2
3 1.09 0.909 0.779 0.682 0.606 0.545 0.496 0.454 0.419 0.389 0.363 0.341 0.321 0.303 0.287 0.273 3
Note) 4 1.50 1.25 0.395 0.375 4
1.07 0.938 0.834 0.750 0.682 0.625 0.577 0.536 0.500 0.469 0.441 0.417
1.This table is to be 5 2.05 1.71 1.46 1.28 1.14 1.03 0.932 0.854 0.788 0.683 0.641 0.603 0.569 0.539 0.513 5
0.732
applied to select 6 2.78 2.32 1.99 1.74 1.55 1.39 1.27 1.16 1.07 0.994 0.928 0.870 0.819 0.773 0.733 0.696 6
Seonghwas stan- 7 3.48 2.90 2.49 2.18 1.94 1.74 1.58 1.45 1.34 1.24 1.16 1.09 1.02 0.968 0.917 0.871 7
dardized constant 8 4.16 3.47 2.97 2.60 2.31 2.08 1.89 1.73 1.60 1.49 1.39 1.30 1.22 1.16 1.09 1.04 8
hanger. 9 4.98 4.15 3.56 3.11 2.77 2.49 2.26 2.08 1.92 1.78 1.66 1.56 1.47 1.38 1.31 1.25 9
10 5.99 4.99 4.28 3.74 3.33 2.99 2.72 2.49 2.30 2.14 2.00 1.87 1.76 1.66 1.58 1.50 10
11 6.67 5.56 4.76 4.17 3.71 3.34 3.03 2.78 2.57 2.38 2.22 2.08 1.96 1.85 1.76 1.67 11
2. Values of this
12 7.36 6.13 5.26 4.60 4.09 3.68 3.34 3.07 2.83 2.63 2.45 2.30 2.16 2.04 1.94 1.84 12
table for the given
13 6.91 5.93 5.19 4.61 4.15 3.77 3.46 3.19 2.96 2.77 2.59 2.44 2.30 2.18 2.07 13
maximum travel
14 7.60 6.51 5.70 5.06 4.56 4.14 3.80 3.51 3.26 3.04 2.85 2.68 2.53 2.40 2.28 14
and hanger size 15 2.68 2.55 15
8.50 7.28 6.37 5.67 5.10 4.64 4.25 3.92 3.64 3.40 3.19 3.00 2.83
indicate maximum 16 9.39 8.05 7.04 6.26 5.64 5.12 4.70 4.33 3.76 3.52 3.31 3.13 2.97 2.82 16
4.03
load. 17 10.5 8.99 7.87 7.00 6.30 5.72 5.25 4.84 4.50 4.20 3.94 3.70 3.50 3.31 3.15 17
18 11.6 9.95 8.71 7.74 6.97 6.33 5.81 5.36 4.98 4.64 4.35 4.10 3.87 3.67 3.48 18
3. Load of preceding 19 12.8 11.0 9.64 8.56 7.71 7.01 6.42 5.93 5.51 5.14 4.82 4.53 4.28 4.06 3.85 19
size means 20 14.1 12.1 10.6 9.41 8.47 7.70 7.06 6.52 6.05 5.65 5.30 4.98 4.71 4.46 4.24 20
minimum load. 21 15.8 13.5 11.8 10.5 9.47 8.61 7.89 7.28 6.76 6.31 5.92 5.57 5.26 4.98 4.73 21
For example, load 22 17.0 14.6 12.8 11.3 10.2 9.27 8.50 7.85 7.29 6.80 6.38 6.00 5.67 5.37 5.10 22
23 18.7 16.0 14.0 12.5 11.2 10.2 9.35 8.63 8.01 7.48 7.01 6.60 6.23 5.91 5.61 23
range for size
24 20.4 17.5 15.3 13.6 12.2 11.1 10.2 9.42 8.74 8.16 7.65 7.20 6.80 6.44 6.12 24
37 will become
25 22.5 19.3 16.9 15.0 13.5 12.3 11.2 10.4 9.63 8.99 8.43 7.93 7.49 7.09 6.74 25
16.6 to 18.5(kN) 26 10.5 7.38 26
24.6 21.1 18.5 16.4 14.8 13.4 12.3 11.4 9.84 9.23 8.68 8.20 7.77
if maximum travel 27 27.0 23.1 20.3 18.0 16.2 14.7 13.5 12.5 11.6 10.8 10.1 9.53 9.00 8.53 8.10 27
is 240(mm). 28 29.6 25.3 22.2 19.7 17.7 16.1 14.8 13.6 12.7 11.8 11.1 10.4 9.85 9.33 8.87 28
29 24.2 21.5 19.4 17.6 16.1 14.9 13.8 12.9 12.1 11.4 10.8 10.2 9.68 29
4. Following color 30 27.0 24.0 21.6 19.6 18.0 16.6 15.4 14.4 13.5 12.7 12.0 11.4 10.8 30
codes were used. 31 30.7 27.2 24.5 22.3 20.4 18.9 17.5 16.3 15.3 14.4 13.6 12.9 12.3 31
32 33.3 29.6 26.7 24.2 22.2 20.5 19.1 17.8 16.7 15.7 14.8 14.0 13.3 32
5. Unit : mm for 33 37.0 32.9 29.6 26.9 24.7 22.8 21.2 19.7 18.5 17.4 16.5 15.6 14.8 33
34 40.7 36.2 32.6 29.6 27.1 25.0 23.3 21.7 20.4 19.2 18.1 17.1 16.3 34
travel, kN for load.
35 45.4 40.3 36.3 33.0 30.2 27.9 25.9 24.2 22.7 21.3 20.2 19.1 18.1 35
36 49.8 44.2 39.8 36.2 33.2 30.6 28.4 26.5 24.9 23.4 22.1 21.0 19.9 36
37 44.3 40.3 36.9 34.1 31.7 29.6 27.7 26.1 24.6 23.3 22.2 37
38 48.6 44.2 40.5 37.4 34.7 32.4 30.4 28.6 27.0 25.6 24.3 38
39 54.1 49.2 45.1 41.6 38.7 36.1 33.8 31.8 30.1 28.5 27.1 39
40 59.6 54.2 49.7 45.9 42.6 39.7 37.3 35.1 33.1 31.4 29.8 40
41 65.5 59.6 54.6 50.4 46.8 43.7 40.9 38.5 36.4 34.5 32.8 41
42 71.2 64.7 59.3 54.8 50.9 47.5 44.5 41.9 39.6 37.5 35.6 42
43 75.7 68.8 63.1 58.2 54.1 50.5 47.3 44.5 42.1 39.8 37.9 43
44 80.0 72.7 66.7 61.6 57.2 53.3 50.0 47.1 44.5 42.1 40.0 44
45 86.1 78.3 71.8 66.2 61.5 57.4 53.8 50.6 47.8 45.3 43.1 45
46 92.2 83.8 76.8 70.9 65.8 61.5 57.6 54.2 51.2 48.5 46.1 46
47 91.6 84.0 77.5 72.0 67.2 63.0 59.3 56.0 53.1 50.4 47
48 99.8 91.5 84.5 78.5 73.2 68.6 64.6 61.0 57.8 54.9 48
49 107.7 98.7 91.1 84.6 79.0 74.0 69.7 65.8 62.3 59.2 49
50 115.7 106.1 97.9 90.9 84.9 79.6 74.9 70.7 67.0 63.6 50
CHH A1
51 125.7 115.2 106.4 98.8 92.2 86.4 81.3 76.8 72.8 69.1 51
A 1A
52 135.9 124.5 115.0 106.8 99.6 93.4 87.9 83.0 78.7 74.7 52
B1
53 147.6 135.3 124.9 116.0 108.3 101.5 95.5 90.2 85.5 81.2 53
B1A 54 125.1 116.8 92.2 87.6 54
159.2 146.0 134.7 109.5 103.0 97.3
CHH B2 55 170.3 156.1 144.1 133.8 124.9 117.1 110.2 104.1 98.6 93.7 55
C1, F1 56 181.9 166.7 153.9 142.9 133.4 125.0 117.7 111.1 105.3 100.0 56
57 193.8 177.7 164.0 152.3 142.1 133.3 125.4 118.4 112.2 106.6 57
CHV LB1 58 206.5 189.3 174.7 162.2 151.4 142.0 133.6 126.2 119.5 113.6 58
LB2 59 221.1 202.7 187.1 173.7 162.1 152.0 143.1 135.1 128.0 121.6 59
60 235.4 215.8 199.2 184.9 172.6 161.8 152.3 143.8 136.3 129.5 60
Refer to other 61 217.0 201.5 188.0 176.3 165.9 156.7 148.4 141.0 61
sheets for 62 237.8 220.8 206.1 193.2 181.8 171.7 162.7 154.6 62
CHH and CHV
63 260.7 242.1 225.9 211.8 199.4 188.3 178.4 169.5 63
64 289.5 268.8 250.9 235.2 221.4 209.1 198.1 188.2 64
CHB C1 65 210.6 65
D1 66 235.0 66
67 266.1 67
68 296.6 68
69 320.7 69
Size Size
Travel
50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 Travel
CH - 31 58
Travel Travel
Size 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400 Size
0.111 0.106 0.102 0.098 0.094 0.090 0.087 0.084 0.081 0.078 0.076 0.073 0.071 0.069 0.067 0.065 0.063 0.062 0.060 0.059
1 1
0.126 0.120 0.115 0.110 0.106 0.102 0.098 0.095 0.091 0.088 0.085 0.083 0.080 0.078 0.076 0.074 0.072 0.070 0.068 0.066
2 0.194 0.185 0.177 0.170 0.163 0.157 0.151 0.146 0.141 0.136 0.132 0.128 0.124 0.120 0.117 0.113 0.110 0.107 0.105 0.102 2
3 0.260 0.248 0.237 0.227 0.218 0.210 0.202 0.195 0.188 0.182 0.176 0.170 0.165 0.160 0.156 0.151 0.147 0.143 0.140 0.136 3
4 0.357 0.341 0.326 0.313 0.300 0.289 0.278 0.268 0.259 0.250 0.242 0.234 0.227 0.221 0.214 0.208 0.203 0.197 0.192 0.188 4
5 0.488 0.466 0.446 0.427 0.410 0.394 0.380 0.366 0.353 0.342 0.331 0.320 0.311 0.301 0.293 0.285 0.277 0.270 0.263 0.256 5
6 0.663 0.633 0.605 0.580 0.557 0.535 0.516 0.497 0.480 0.464 0.449 0.435 0.422 0.409 0.398 0.387 0.376 0.366 0.357 0.348 6
7 0.830 0.792 0.757 0.726 0.697 0.670 0.645 0.622 0.601 0.581 0.562 0.544 0.528 0.512 0.498 0.484 0.471 0.458 0.447 0.436 7
8 0.990 0.945 0.904 0.866 0.832 0.800 0.770 0.743 0.717 0.693 0.671 0.650 0.630 0.611 0.594 0.578 0.562 0.547 0.533 0.520 8
9 1.19 1.13 1.08 1.04 0.996 0.958 0.923 0.890 0.859 0.830 0.804 0.778 0.755 0.733 0.712 0.692 0.673 0.656 0.639 0.623 9
10 1.43 1.36 1.30 1.25 1.20 1.15 1.11 1.07 1.03 0.998 0.965 0.935 0.907 0.880 0.855 0.831 0.809 0.788 0.767 0.748 10
11 1.59 1.52 1.45 1.39 1.33 1.28 1.24 1.19 1.15 1.11 1.08 1.04 1.01 0.981 0.953 0.926 0.901 0.878 0.855 0.834 11
12 1.75 1.67 1.60 1.53 1.47 1.42 1.36 1.31 1.27 1.23 1.19 1.15 1.11 1.08 1.05 1.02 0.994 0.968 0.943 0.920 12
13 1.98 1.89 1.80 1.73 1.66 1.60 1.54 1.48 1.43 1.38 13
14 2.17 2.07 1.98 1.90 1.82 1.75 1.69 1.63 1.57 1.52 14
15 2.43 2.32 2.22 2.12 2.04 1.96 1.89 1.82 1.76 1.70 15
16 2.68 2.56 2.45 2.35 2.25 2.17 2.09 2.01 1.94 1.88 16
17 3.00 2.86 2.74 2.62 2.52 2.42 2.33 2.25 2.17 2.10 17
18 3.32 3.17 3.03 2.90 2.79 2.68 2.58 2.49 2.40 2.32 18
19 3.67 3.50 3.35 3.21 3.08 2.96 2.85 2.75 2.66 2.57 19
20 4.03 3.85 3.68 3.53 3.39 3.26 3.14 3.03 2.92 2.82 20
21 4.51 4.30 4.12 3.95 3.79 3.64 3.51 3.38 3.27 3.16 21
22 4.86 4.64 4.43 4.25 4.08 3.92 3.78 3.64 3.52 3.40 22
23 5.34 5.10 4.88 4.68 4.49 4.32 4.16 4.01 3.87 3.74 23
24 5.83 5.56 5.32 5.10 4.90 4.71 4.53 4.37 4.22 4.08 24
25 6.42 6.13 5.86 5.62 5.39 5.18 4.99 4.81 4.65 4.49 25
26 7.03 6.71 6.42 6.15 5.90 5.68 5.47 5.27 5.09 4.92 26
27 7.71 7.36 7.04 6.75 6.48 6.23 6.00 5.79 5.59 5.40 27
28 8.44 8.06 7.71 7.39 7.09 6.82 6.57 6.33 6.11 5.91 5.72 5.54 5.37 5.21 5.07 4.93 4.79 4.67 4.55 4.43 28
29 9.22 8.80 8.42 8.07 7.74 7.45 7.17 6.91 6.68 6.45 6.25 6.05 5.87 5.69 5.53 5.38 5.23 5.09 4.96 4.84 29
30 10.3 9.80 9.38 8.99 8.63 8.30 7.99 7.70 7.44 7.19 6.96 6.74 6.54 6.34 6.16 5.99 5.83 5.68 5.53 5.39 30
31 11.7 11.1 10.7 10.2 9.81 9.43 9.08 8.76 8.46 8.17 7.91 7.66 7.43 7.21 7.01 6.81 6.63 6.45 6.29 6.13 31
32 12.7 12.1 11.6 11.1 10.7 10.3 9.88 9.53 9.20 8.89 8.60 8.33 8.08 7.84 7.62 7.41 7.21 7.02 6.84 6.67 32
33 14.1 13.5 12.9 12.3 11.8 11.4 11.0 10.6 10.2 9.87 9.55 9.26 8.98 8.71 8.46 8.23 8.01 7.79 7.59 7.41 33
34 15.5 14.8 14.2 13.6 13.0 12.5 12.1 11.6 11.2 10.9 10.5 10.2 9.87 9.58 9.30 9.04 8.80 8.57 8.35 8.14 34
35 17.3 16.5 15.8 15.1 14.5 14.0 13.4 13.0 12.5 12.1 11.7 11.3 11.0 10.7 10.4 10.1 9.81 9.55 9.30 9.07 35
36 19.0 18.1 17.3 16.6 15.9 15.3 14.7 14.2 13.7 13.3 12.8 12.4 12.1 11.7 11.4 11.1 10.8 10.5 10.2 9.95 36
37 21.1 20.2 19.3 18.5 17.7 17.1 16.4 15.8 15.3 14.8 14.3 13.9 13.4 13.0 12.7 12.3 12.0 11.7 11.4 11.1 37
38 23.2 22.1 21.1 20.3 19.5 18.7 18.0 17.4 16.8 16.2 15.7 15.2 14.7 14.3 13.9 13.5 13.1 12.8 12.5 12.2 38
39 25.8 24.6 23.5 22.6 21.7 20.8 20.0 19.3 18.7 18.0 17.5 16.9 16.4 15.9 15.5 15.0 14.6 14.2 13.9 13.5 39
40 28.4 27.1 25.9 24.8 23.8 22.9 22.1 21.3 20.6 19.9 19.2 18.6 18.1 17.5 17.0 16.6 16.1 15.7 15.3 14.9 40
41 31.2 29.8 28.5 27.3 26.2 25.2 24.3 23.4 22.6 21.8 21.1 20.5 19.9 19.3 18.7 18.2 17.7 17.2 16.8 16.4 41
42 33.9 32.4 31.0 29.7 28.5 27.4 26.4 25.4 24.6 23.7 23.0 22.3 21.6 20.9 20.3 19.8 19.2 18.7 18.3 17.8 42
43 36.1 34.4 32.9 31.5 30.3 29.1 28.0 27.0 26.1 25.2 24.4 23.7 22.9 22.3 21.6 21.0 20.5 19.9 19.4 18.9 43
44 38.1 36.4 34.8 33.3 32.0 30.8 29.6 28.6 27.6 26.7 25.8 25.0 24.2 23.5 22.9 22.2 21.6 21.1 20.5 20.0 44
45 41.0 39.1 37.4 35.9 34.4 33.1 31.9 30.8 29.7 28.7 27.8 26.9 26.1 25.3 24.6 23.9 23.3 22.7 22.1 21.5 45
46 43.9 41.9 40.1 38.4 36.9 35.5 34.1 32.9 31.8 30.7 29.7 28.8 27.9 27.1 26.3 25.6 24.9 24.3 23.6 23.0 46
47 48.0 45.8 43.8 42.0 40.3 38.8 37.3 36.0 34.8 33.6 32.5 31.5 30.5 29.7 28.8 28.0 27.2 26.5 25.8 25.2 47
48 52.3 49.9 47.8 45.8 43.9 42.2 40.7 39.2 37.9 36.6 35.4 34.3 33.3 32.3 31.4 30.5 29.7 28.9 28.2 27.5 48
49 56.4 53.8 51.5 49.4 47.4 45.6 43.9 42.3 40.8 39.5 38.2 37.0 35.9 34.8 33.8 32.9 32.0 31.2 30.4 29.6 49
50 60.6 57.9 55.3 53.0 50.9 49.0 47.1 45.5 43.9 42.4 41.1 39.8 38.6 37.4 36.4 35.4 34.4 33.5 32.6 31.8 50
51 65.8 62.9 60.1 57.6 55.3 53.2 51.2 49.4 47.7 46.1 44.6 43.2 41.9 40.7 39.5 38.4 37.4 36.4 35.5 34.6 51
52 71.2 67.9 65.0 62.3 59.8 57.5 55.4 53.4 51.5 49.8 48.2 46.7 45.3 44.0 42.7 41.5 40.4 39.3 38.3 37.4 52
53 77.3 73.8 70.6 67.7 65.0 62.5 60.1 58.0 56.0 54.1 52.4 50.8 49.2 47.8 46.4 45.1 43.9 42.7 41.6 40.6 53
54 83.4 79.6 76.2 73.0 70.1 67.4 64.9 62.6 60.4 58.4 56.5 54.7 53.1 51.5 50.0 48.7 47.3 46.1 44.9 43.8 54
55 89.2 85.1 81.4 78.0 74.9 72.0 69.4 66.9 64.6 62.4 60.4 58.5 56.8 55.1 53.5 52.0 50.6 49.3 48.0 46.8 55
56 95.3 90.9 87.0 83.4 80.0 76.9 74.1 71.5 69.0 66.7 64.5 62.5 60.6 58.8 57.2 55.6 54.1 52.6 51.3 50.0 56
57 101.5 96.9 92.7 88.8 85.3 82.0 79.0 76.1 73.5 71.1 68.8 66.6 64.6 62.7 60.9 59.2 57.6 56.1 54.7 53.3 57
58 108.2 103.2 98.7 94.6 90.8 87.4 84.1 81.1 78.3 75.7 73.3 71.0 68.8 66.8 64.9 63.1 61.4 59.8 58.2 56.8 58
59 115.8 110.5 105.7 101.3 97.3 93.5 90.1 86.9 83.9 81.1 78.5 76.0 73.7 71.5 69.5 67.6 65.7 64.0 62.4 60.8 59
60 123.3 117.7 112.6 107.9 103.6 99.6 95.9 92.5 89.3 86.3 83.5 80.9 78.5 76.1 74.0 71.9 70.0 68.1 66.4 64.7 60
61 134.3 128.2 122.6 117.5 112.8 108.5 104.5 100.7 97.3 94.0 91.0 88.1 85.5 83.0 80.6 78.3 76.2 74.2 72.3 70.5 61
62 147.2 140.5 134.4 128.8 123.6 118.9 114.5 110.4 106.6 103.0 99.7 96.6 93.7 90.9 88.3 85.9 83.5 81.3 79.3 77.3 62
63 161.4 154.1 147.4 141.2 135.6 130.4 125.5 121.0 116.9 113.0 109.3 105.9 102.7 99.7 96.8 94.1 91.6 89.2 86.9 84.7 63
64 179.2 171.1 163.6 156.8 150.6 144.8 139.4 134.4 129.8 125.5 121.4 117.6 114.1 110.7 107.5 104.6 101.7 99.0 96.5 94.1 64
65 200.6 191.5 183.2 175.5 168.5 162.0 156.0 150.5 145.3 140.4 135.9 131.7 127.7 123.9 120.4 117.0 113.9 110.9 108.0 105.3 65
66 223.8 213.6 204.3 195.8 188.0 180.7 174.0 167.8 162.0 156.6 151.6 146.9 142.4 138.2 134.3 130.5 127.0 123.7 120.5 117.5 66
67 253.4 241.9 231.4 221.7 212.8 204.7 197.1 190.0 183.5 177.4 171.6 166.3 161.2 156.5 152.0 147.8 143.8 140.0 136.4 133.0 67
68 282.4 269.6 257.9 247.1 237.2 228.1 219.7 211.8 204.5 197.7 191.3 185.3 179.7 174.4 169.5 164.8 160.3 156.1 152.1 148.3 68
69 305.4 291.5 278.8 267.2 256.5 246.7 237.5 229.1 221.2 213.8 206.9 200.4 194.3 188.6 183.2 178.2 173.3 168.8 164.4 160.3 69
Size Size
Travel
210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400 Travel
59 CH - 32
< Blanked intentionally >
Variable
Hangers and Supports
1.0 Type Designation and Usage
2.0 Features
4.0 Dimensions
61
Variable Hangers and Supports
To compensate for the slight vertical displacements in the piping system, spring components are used as supports. The function of these
components is based on preset helical coil springs which exert a variable supporting load over the whole range of movement correspond-
ing to the given spring characteristics. Load variations resulting from this are limited through corresponding specifications based on piping
stress analysis.
VH 1 A - 8 - M42
1.1 Size Number vs. M-Size 1.2 Assembly Configuration and Usage
Size Number M-Size Assembly
Appearance Usage
Configuration
0 M12
1 M12 A
Most frequently used
(Hanging type)
Fitted with both upper/lower connection for suspension
2 M12
3 M16
4 M20 D
requently used for simple installation
F
(Seated Type)
Just seating it on the steel
5 M24
Connected by a rod passing through the unit
6 M30
uitable alternative as a column support, if suspen-
S
sion were impossible
7 M36 F
Considerable horizontal movement can effect on the
(Support Type)
operation of the support system Teflon plate(PTFE)
8 M42 or stainless steel plate/graphite recommendable for
this case
9 M48
Pin to pin connection
G
10 M56
Infrequently used as support placed on the tilt or for
(Angulated Type)
eliminating the frictional force instead of supporting
type(Type F)
11 M64
12 M68
T
Infrequently used, if sufficient gap between
13 M72 (Trapeze Type)
structure and pipe were not permitted
14 M80
VH - 1 62
2.0 Features
Fig. 2.1 show the schematic diagram and main items of the variable hanger.
Several features are described as follows;
1) Use the pre-relaxed spring coil in order to guarantee spring
characteristics for plant life.
2) All components are strong enough to withstand the external
impact during erection.
3) Universal locking device used.
4) Turnbuckle placed to adjust the pipe elevation.
5) Welding works excluded to the maximum extent.
Upper Plate
Round Bar
Spring Plate
Stopper Pipe
Lower Plate
Spring
Rod Coupling
Threaded Rod
Washer
Name Plate
Pop Rivet
Threaded Rod 18
11 16
15
Hex. Nut
17
2
Hex. Jam Nut 4
Locking Nut 19
9
7
Caution :
Variable hangers and supports are preset at the shop to the 1
VH - 2
63 VH - 2
Variable Hangers and Supports
3.0 Selection Method and Table
--- eq.(1)
However, the customers can request the smaller limitation considering importance of piping system.
Spring Rate(N/mm)
33.3 66.6 100.0 133.3 166.6
11.1 22.2 44.4 88.9 133.3 177.8 222.2
2.1 4.1 8.3 16.6 33.3 66.6 133.3 200.0 266.6 333.3
4.1 8.3 16.6 33.3 66.6 133.3 266.6 400.0 533.3 666.6
8.3 16.6 33.3 66.6 133.3 266.6 533.3 800.0 1066.6 1333.3
VH - 3
VH - 3 64
3.2 Selection Example
x
Step 2. Determination of Hanger Size
From selection table for a given load(10,000 N), Size 5 selected.
Step 6. Blocking Position
Step 3. Check the Variability Theoretically, this hanger to be blocked at 40(mm) lower
from top position per selection table.
From eq.(1),
if VH2A-5-M24 selected.
Spring Rate(N/mm)
533.3 666.6 800.0 1000.0 1333.3
1066.0 1333.3 1600.0 2000.0 2666.6
2133.3 2666.6 3200.0 4000.0 5333.3
VH - 4
65 VH - 4
Variable Hangers and Supports
4.0 Dimensions
4.1 Type A
A K
d2
blocking device X1
H
E
d2
X2
Dimension : mm
Type A B K E d2 H X1 X2 Weight(kg)
VH1A-0-M12 140 89 120 190 M12 15 15 40 3.70
VH2A-0-M12 140 89 120 265 M12 15 15 40 4.00
VH3A-0-M12 140 89 120 485 M12 15 15 40 7.00
VH1A-1-M12 140 89 120 195 M12 15 15 40 4.00
VH2A-1-M12 140 89 120 260 M12 15 15 40 5.00
VH3A-1-M12 140 89 120 485 M12 15 15 40 8.00
VH1A-2-M12 170 114 145 195 M12 15 15 40 5.00
VH2A-2-M12 170 114 145 265 M12 15 15 40 8.00
VH3A-2-M12 170 114 145 485 M12 15 15 40 12.00
VH1A-3-M16 170 114 145 195 M16 20 20 40 7.00
VH2A-3-M16 170 114 145 275 M16 20 20 40 8.00
VH3A-3-M16 170 114 145 480 M16 20 20 40 13.00
VH4A-3-M16 170 114 145 718 M16 20 20 40 18.00
VH1A-4-M20 220 152 190 225 M20 25 25 40 12.00
VH2A-4-M20 220 152 190 310 M20 25 25 40 15.00
VH3A-4-M20 220 152 190 540 M20 25 25 40 23.00
VH4A-4-M20 220 152 190 795 M20 25 25 40 32.00
VH1A-5-M24 257 178 217 243 M24 30 30 50 22.00
VH2A-5-M24 257 178 217 310 M24 30 30 50 26.00
VH3A-5-M24 257 178 217 560 M24 30 30 50 37.00
VH4A-5-M24 257 178 217 820 M24 30 30 50 52.00
VH5A-5-M24 257 178 217 1070 M24 30 30 50 63.00
VH1A-6-M30 310 219 265 265 M30 35 35 50 39.00
VH2A-6-M30 310 219 265 350 M30 35 35 50 47.00
VH3A-6-M30 310 219 265 635 M30 35 35 50 67.00
VH4A-6-M30 310 219 265 945 M30 35 35 50 96.00
VH5A-6-M30 310 219 265 1225 M30 35 35 50 116.00
VH1A-7-M36 347 245 297 265 M36 45 45 60 65.00
VH2A-7-M36 347 245 297 385 M36 45 45 60 78.00
VH3A-7-M36 347 245 297 665 M36 45 45 60 103.00
VH4A-7-M36 347 245 297 1015 M36 45 45 60 148.00
VH5A-7-M36 347 245 297 1300 M36 45 45 60 172.00
VH1A-8-M42 368 245 303 295 M42 50 50 70 78.00
VH2A-8-M42 368 245 303 455 M42 50 50 70 98.00
VH3A-8-M42 368 245 303 845 M42 50 50 70 143.00
VH4A-8-M42 368 245 303 1260 M42 50 50 70 201.00
VH5A-8-M42 368 245 303 1650 M42 50 50 70 245.00
VH1A-9-M48 402 273 332 315 M48 60 60 80 119.00
VH2A-9-M48 402 273 332 505 M48 60 60 80 141.00
VH3A-9-M48 402 273 332 865 M48 60 60 80 195.00
VH4A-9-M48 402 273 332 1315 M48 60 60 80 269.00
VH5A-9-M48 402 273 332 1695 M48 60 60 80 323.00
VH - 5 66
4.2 Type A(Heavy Duty)
lug thickness S
d
blocking device
R
B
E
H
X
d 2
A
Dimension : mm
Type A E d2 R B H X S d Weight(kg)
VH1A-10-M56 508 440 M56x4P 90 120 318 85 30 61 240.00
VH2A-10-M56 508 560 M56x4P 90 120 435 85 30 61 270.00
VH3A-10-M56 508 840 M56x4P 90 120 713 85 30 61 340.00
VH1A-11-M64 559 475 M64x4P 105 135 335 103 35 71 285.00
VH2A-11-M64 559 595 M64x4P 105 135 452 103 35 71 320.00
VH3A-11-M64 559 875 M64x4P 105 135 730 103 35 71 410.00
VH1A-12-M68 610 490 M68x4P 105 135 348 100 35 71 360.00
VH2A-12-M68 610 610 M68x4P 105 135 465 100 35 71 405.00
VH3A-12-M68 610 890 M68x4P 105 135 743 100 35 71 510.00
VH1A-13-M72 610 555 M72x4P 120 150 403 110 35 81 455.00
VH2A-13-M72 610 685 M72x4P 120 150 530 110 35 81 515.00
VH3A-13-M72 610 955 M72x4P 120 150 800 110 35 81 625.00
VH1A-14-M80 610 630 M80x4P 135 165 440 120 35 91 550.00
VH2A-14-M80 610 800 M80x4P 135 165 605 120 35 91 655.00
VH3A-14-M80 610 1175 M80x4P 135 165 977 120 35 91 865.00
note 1) Dimension E increases according to spring travel.
2) Extra long spring hanger available on special request.
VH - 6
67 VH - 6
Variable Hangers and Supports
4.3 Type D
C K
blocking device
E
D
H
S
d 2
B d
Dimension : mm
VH - 7 68
4.4 Type D(Heavy Duty)
blocking device
E
D
H
d 2
Dimension : mm
VH - 8
69 VH - 8
Variable Hangers and Supports
4.5 Type F
C K
blocking device E
H
S
B d
Dimension : mm
Type A B C D K E H S d Weight(kg)
VH1F-0 125 90 90 140 120 215 156 8 12 5.00
VH2F-0 125 90 90 140 120 345 256 8 12 7.00
VH3F-0 125 90 90 140 120 585 481 8 12 10.00
VH1F-1 125 90 90 140 120 215 156 8 12 5.00
VH2F-1 125 90 90 140 120 345 256 8 12 7.00
VH3F-1 125 90 90 140 120 585 481 8 12 10.00
VH1F-2 150 105 110 170 145 215 163 10 14 8.00
VH2F-2 150 105 110 170 145 345 263 10 14 12.00
VH3F-2 150 105 110 170 145 585 473 10 14 17.00
VH1F-3 150 105 110 170 145 225 172 12 14 10.00
VH2F-3 150 105 110 170 145 345 267 12 14 12.00
VH3F-3 150 105 110 170 145 585 487 12 14 17.00
VH4F-3 150 105 110 170 145 840 717 12 14 23.00
VH1F-4 190 140 150 220 190 270 201 12 18 17.00
VH2F-4 190 140 150 220 190 415 313 12 18 22.00
VH3F-4 190 140 150 220 190 670 547 12 18 31.00
VH4F-4 190 140 150 220 190 940 799 12 18 41.00
VH1F-5 220 160 180 257 217 310 237 12 18 29.00
VH2F-5 220 160 180 257 217 440 333 12 18 34.00
VH3F-5 220 160 180 257 217 690 567 12 18 46.00
VH4F-5 220 160 180 257 217 970 825 12 18 63.00
VH1F-6 260 190 220 310 265 350 279 15 23 47.00
VH2F-6 260 190 220 310 265 515 396 15 23 57.00
VH3F-6 260 190 220 310 265 790 674 15 23 74.00
VH4F-6 260 190 220 310 265 1120 984 15 23 111.00
VH1F-7 290 205 250 347 297 410 316 20 23 73.00
VH2F-7 290 205 250 347 297 560 453 20 23 88.00
VH3F-7 290 205 250 347 297 870 723 20 23 115.00
VH4F-7 290 205 250 347 297 1240 1073 20 23 152.00
VH1F-8 290 205 250 368 303 440 356 20 27 83.00
VH2F-8 290 205 250 368 303 635 531 20 27 105.00
VH3F-8 290 205 250 368 303 1045 903 20 27 151.00
VH4F-8 290 205 250 368 303 1500 1318 20 27 202.00
VH1F-9 340 245 300 402 332 500 404 25 33 132.00
VH2F-9 340 245 300 402 332 705 579 25 33 156.00
VH3F-9 340 245 300 402 332 1100 941 25 33 214.00
VH4F-9 340 245 300 402 332 1570 1391 25 33 269.00
note 1) Dimension E is independent of the load setting, but varies under load by the corresponding spring travel, and adjustable up to +30(mm).
VH - 9 70
4.5.1 Extension Pipe
Material : Carbon Steel
A b
d
DETAIL A
Dimension : mm
A
3
Dimension : mm
Size C
Type Applicable Hanger Size Weight(kg)
(Axt)
90 VHXF-0~1
CP-XP-V-50 50x6t 0.03
110 VHXF-2~3
CP-XP-V-80 80x6t 150 VHXF-4 0.07
180 VHXF-5
CP-XP-V-120 120x6t 0.15
220 VHXF-6
CP-XP-V-150 150x6t 250 VHXF-7~8 0.23
CP-XP-V-180 180x6t 300 VHXF-9 0.34
VH - 1
71 VH -10
Variable Hangers and Supports
4.6 Type F(Heavy Duty)
blocking device
E
H
S
B
d
Dimension : mm
Type A B C E H S d Weight(kg)
VH1F-10 530 430 420 405 330 25 33 230.00
VH2F-10 530 430 420 535 450 25 33 260.00
VH3F-10 530 430 420 835 730 25 33 360.00
VH1F-11 580 480 420 450 370 25 33 310.00
VH2F-11 580 480 420 585 500 25 33 350.00
VH3F-11 580 480 420 880 775 25 33 460.00
VH1F-12 630 520 450 460 380 25 33 380.00
VH2F-12 630 520 450 595 510 25 33 430.00
VH3F-12 630 520 450 890 785 25 33 555.00
VH1F-13 630 520 450 505 425 30 39 440.00
VH2F-13 630 520 450 685 595 30 39 520.00
VH3F-13 630 520 450 1075 965 30 39 740.00
VH1F-14 630 520 480 560 475 35 39 495.00
VH2F-14 630 520 480 750 655 35 39 580.00
VH3F-14 630 520 480 1135 1020 35 39 785.00
note 1) Dimension E is independent of the load setting, but varies under load by the corresponding spring travel, and adjustable up to +30(mm).
2) Extra long spring hanger available on special request.
VH - 10
VH - 11 72 VH - 10
4.6.1 Extension Pipe
Material : Carbon Steel
A b
d
DETAIL A
Dimension : mm
Material : Teflon/Graphite
A
3
Dimension : mm
Size C
Type Applicable Hanger Size Weight(kg)
(Axt)
CP-XP-V-280 280x6t 420 VHXF-10~11 0.81
CP-XP-V-300 300x6t 450 VHXF-12~13 0.93
CP-XP-V-320 320x6t 480 VHXF-14 1.06
VH - 1
73 VH -12
Variable Hangers and Supports
4.7 Type G
A A A A
D
D
D
blocking device blocking device blocking device blocking device
E
E MAX
E MAX
F
B B
P
B B
F
F
P
Dimension : mm
Ext.
Type A B K E E-MAX D F P Weight(kg)
Weight(kg/m)
VH1G-0-06 140 125 120 431 1123 369 62 12 5.00 3.24
VH2G-0-06 140 125 120 561 1253 499 62 12 7.00 3.24
VH3G-0-06 140 125 120 801 1493 739 62 12 10.00 3.24
VH1G-1-06 140 125 120 431 1123 369 62 12 5.00 3.24
VH2G-1-06 140 125 120 561 1253 499 62 12 7.00 5.41
VH3G-1-06 140 125 120 801 1493 739 62 12 10.00 7.48
VH1G-2-06 170 150 145 431 1123 369 62 12 8.00 11.40
VH2G-2-06 170 150 145 561 1253 499 62 12 12.00 11.40
VH3G-2-06 170 150 145 801 1493 739 62 12 17.00 15.27
VH1G-3-06 170 150 145 441 1133 379 62 12 10.00 15.27
VH2G-3-06 170 150 145 561 1253 499 62 12 12.00 3.24
VH3G-3-06 170 150 145 801 1493 739 62 12 17.00 3.24
VH1G-4-1 220 190 190 493 1184 427 66 15 17.00 3.24
VH2G-4-1 220 190 190 638 1329 572 66 15 22.00 3.24
VH3G-4-1 220 190 190 893 1584 827 66 15 31.00 5.41
VH1G-5-3 257 220 217 576 1310 510 66 17 29.00 7.48
VH2G-5-3 257 220 217 706 1440 640 66 17 34.00 11.40
VH3G-5-3 257 220 217 956 1690 890 66 17 46.00 11.40
VH1G-6-6 310 260 265 662 1430 585 77 25 47.00 15.27
VH2G-6-6 310 260 265 827 1595 750 77 25 57.00 15.27
VH3G-6-6 310 260 265 1102 1870 1025 77 25 74.00 3.24
VH1G-7-6 347 290 297 720 1486 643 77 25 73.00 3.24
VH2G-7-6 347 290 297 870 1636 793 77 25 88.00 3.24
VH3G-7-6 347 290 297 1180 1946 1103 77 25 115.00 3.24
VH1G-8-10 368 290 303 802 1620 710 92 30 83.00 5.41
VH2G-8-10 368 290 303 997 1815 905 92 30 105.00 7.48
VH3G-8-10 368 290 303 1407 2225 1315 92 30 151.00 11.40
VH1G-9-10 402 340 332 857 1670 765 92 30 132.00 11.40
VH2G-9-10 402 340 332 1062 1875 970 92 30 156.00 15.27
VH3G-9-10 402 340 332 1457 2270 1365 92 30 214.00 15.27
note 1) The last digit stands for the Size No. for dynamic duty components(See the upper Table of DE-1.).
VH - 11
VH - 13 74
4.8 Type T
d2
H
Dimension : mm
VH - 12
75 VH - 14
Variable Hangers and Supports
5.0 Additional Variable Hangers and Supports
Sometimes, additional variable hangers and supports will be supplied due to limited headroom or as per the customer requirement
with other spring rate than the standardized one in Section 3 and 4.
M-Size
Working
Load(kN)
Travel(mm)
0 0 0 0.03 0.24 0.33 0.42 0.55 0.74 0.98 1.30 1.75 2.33 3.11 4.05 5.30 7.00 9.34 12.46 16.81 23.36 31.15
5.0 10 15 0.05 0.25 0.34 0.44 0.58 0.77 1.04 1.38 1.84 2.46 3.29 4.28 5.59 7.40 9.87 13.16 17.76 24.67 32.90
10.0 20 30 0.06 0.26 0.36 0.47 0.61 0.81 1.09 1.46 1.94 2.60 3.46 4.50 5.89 7.79 10.39 13.86 18.71 25.99 34.65
15.0 30 45 0.07 0.27 0.38 0.49 0.64 0.85 1.15 1.53 2.04 2.73 3.64 4.73 6.19 8.18 10.92 14.56 19.65 27.30 36.40
20.0 40 60 0.09 0.28 0.40 0.52 0.67 0.89 1.21 1.60 2.14 2.86 3.82 4.96 6.48 8.58 10.95 15.26 20.60 28.62 38.15
25.0 50 75 0.10 0.30 0.42 0.54 0.70 0.94 1.26 1.68 2.24 2.99 3.99 5.19 6.78 8.98 11.97 15.96 21.54 29.93 39.91
30.0 60 90 0.11 0.31 0.44 0.56 0.73 0.98 1.31 1.75 2.33 3.12 4.16 5.42 7.08 9.37 12.50 16.67 22.49 31.24 41.65
35.0 70 105 0.12 0.32 0.46 0.59 0.77 1.02 1.36 1.82 2.43 3.26 4.34 5.64 7.38 9.76 13.02 17.36 23.44 32.56 43.41
40.0 80 120 0.14 0.34 0.47 0.61 0.79 1.06 1.42 1.89 2.53 3.38 4.51 5.87 7.67 10.15 13.55 18.06 24.39 33.86 45.16
45.0 90 135 0.16 0.35 0.49 0.64 0.82 1.10 1.48 1.97 2.63 3.52 4.69 6.10 7.98 10.55 14.08 18.77 25.33 35.18 46.91
50.0 100 150 0.17 0.36 0.51 0.66 0.85 1.15 1.53 2.04 2.73 3.65 4.87 6.33 8.27 10.94 14.60 19.46 26.28 36.49 48.66
55.0 110 165 0.18 0.38 0.53 0.68 0.88 1.19 1.59 2.12 2.83 3.78 5.04 6.55 8.57 11.34 15.13 20.19 27.22 37.81 50.41
60.0 120 180 0.19 0.39 0.55 0.71 0.91 1.23 1.64 2.19 2.92 3.91 5.21 6.78 8.87 11.73 15.65 20.87 28.16 39.13 52.16
65.0 130 195 0.20 0.40 0.57 0.73 0.94 1.27 1.70 2.27 3.02 4.04 5.40 7.01 9.16 12.13 16.18 21.57 29.12 40.44 53.93
70.0 140 210 0.22 0.42 0.59 0.76 0.97 1.30 1.76 2.33 3.12 4.18 5.57 7.24 9.47 12.53 16.71 22.27 30.07 41.75 55.67
75.0 150 225 0.23 0.43 0.61 0.77 1.00 1.35 1.81 2.41 3.22 4.31 5.74 7.47 9.76 12.92 17.23 22.98 31.01 43.07 57.43
80.0 160 240 0.25 0.44 0.62 0.79 1.04 1.39 1.86 2.48 3.32 4.43 5.92 7.69 10.07 13.31 17.76 23.67 31.95 44.38 59.17
Spring Rate(N/mm)
0.9 0.9 1.3 1.6 2.1 2.8 3.7 4.9 6.5 8.7 11.8 15.3 19.8 26.3 35.1 46.9 63.2 87.8 117.1
1.3 1.3 1.8 2.3 2.9 4.0 5.4 7.4 9.8 13.1 17.6 22.86 29.8 39.5 52.7 70.2 94.8 131.7 175.6
2.6 2.6 3.6 4.7 6.1 8.2 11.1 14.7 19.6 26.3 35.0 45.62 59.6 79.0 105.4 140.5 189.6 263.3 351.1
VH - 15 76
5.3 Dimensions for Additional Type A
A K
d2
X1
blocking device
H
E
d2
X2
Dimension : mm
Type A B K E d2 H X1 X2 Weight(kg)
VHMA-0N-M12 170 114 145 250 M12 255 20 40 8.00
VHLA-0N-M12 170 114 145 445 M12 470 20 40 13.00
VHTA-0N-M12 170 114 145 660 M12 685 20 40 17.00
VHMA-00-M12 170 114 145 190 M12 177 20 40 7.00
VHLA-00-M12 170 114 145 295 M12 314 20 40 11.00
VHTA-00-M12 170 114 145 430 M12 451 20 40 14.00
VHMA-01-M12 170 114 145 180 M12 176 20 40 7.00
VHLA-01-M12 170 114 145 285 M12 312 20 40 11.00
VHTA-01-M12 170 114 145 445 M12 448 20 40 14.00
VHMA-02-M12 170 114 145 200 M12 192 20 40 7.00
VHLA-02-M12 170 114 145 310 M12 344 20 40 11.00
VHTA-02-M12 170 114 145 470 M12 496 20 40 15.00
VHMA-03-M12 220 152 190 200 M12 196 20 40 12.00
VHLA-03-M12 220 152 190 325 M12 341 20 40 16.00
VHTA-03-M12 220 152 190 455 M12 486 20 40 20.00
VHMA-04-M12 220 152 190 200 M12 201 20 40 12.00
VHLA-04-M12 220 152 190 320 M12 351 20 40 16.00
VHTA-04-M12 220 152 190 495 M12 501 20 40 21.00
VHMA-05-M12 220 152 190 210 M12 210 20 40 12.00
VHLA-05-M12 220 152 190 340 M12 369 20 40 17.00
VHTA-05-M12 220 152 190 510 M12 528 20 40 22.00
VHMA-06-M16 257 178 217 240 M16 236 20 50 20.00
VHLA-06-M16 257 178 217 365 M16 403 20 50 28.00
VHTA-06-M16 257 178 217 530 M16 570 20 50 37.00
VHMA-07-M16 257 178 217 245 M16 241 20 50 20.00
VHLA-07-M16 257 178 217 370 M16 413 20 50 28.00
VHTA-07-M16 257 178 217 550 M16 585 20 50 37.00
VHMA-08-M16 257 178 217 245 M16 263 20 50 21.00
VHLA-08-M16 257 178 217 410 M16 457 20 50 31.00
VHTA-08-M16 257 178 217 610 M16 651 20 50 41.00
VHMA-09-M20 347 245 297 245 M20 255 25 50 38.00
VHLA-09-M20 347 245 297 405 M20 448 25 50 54.00
VHTA-09-M20 347 245 297 595 M20 641 25 50 70.00
VHMA-10-M20 347 245 297 265 M20 274 25 50 40.00
VHLA-10-M20 347 245 297 445 M20 486 25 50 58.00
VHTA-10-M20 347 245 297 675 M20 698 25 50 75.00
VHMA-11-M20 347 245 297 270 M20 272 25 50 40.00
VHLA-11-M20 347 245 297 450 M20 482 25 50 58.00
VHTA-11-M20 347 245 297 650 M20 692 25 50 76.00
VHMA-12-M24 347 245 297 280 M24 287 30 50 44.00
VHLA-12-M24 347 245 297 470 M24 505 30 50 65.00
VHTA-12-M24 347 245 297 680 M24 723 30 50 85.00
VHMA-13-M24 347 245 297 300 M24 319 30 50 47.00
VHLA-13-M24 347 245 297 530 M24 569 30 50 72.00
VHTA-13-M24 347 245 297 785 M24 819 30 50 96.00
VHMA-14-M30 347 245 297 340 M30 361 35 50 55.00
VHLA-14-M30 347 245 297 615 M30 645 35 50 86.00
VHTA-14-M30 347 245 297 900 M30 929 35 50 116.00
VHMA-15-M30 347 245 297 345 M30 368 35 50 57.00
VHLA-15-M30 347 245 297 620 M30 659 35 50 89.00
VHTA-15-M30 347 245 297 905 M30 950 35 50 121.00
VHMA-16-M36 347 245 297 405 M36 445 45 60 75.00
VHLA-16-M36 347 245 297 750 M36 789 45 60 118.00
VHTA-16-M36 347 245 297 1090 M36 1133 45 60 161.00
VHMA-17-M42 368 245 303 475 M42 521 50 70 92.00
VHLA-17-M42 368 245 303 870 M42 929 50 70 149.00
VHTA-17-M42 368 245 303 1280 M42 1337 50 70 196.00
77 VH - 16
Variable Hangers and Supports
5.4 Dimensions for Additional Type F
D
C K
blocking device
E
H
S
B d
A
Dimension : mm
Type A B C D K E H S d Weight(kg)
VHMF-0N 150 105 110 170 145 330 249 12 14 10.00
VHLF-0N 150 105 110 170 145 575 464 12 14 14.00
VHTF-0N 150 105 110 170 145 824 679 12 14 24.00
VHMF-00 150 105 110 170 145 245 171 12 14 9.00
VHLF-00 150 105 110 170 145 415 308 12 14 12.00
VHTF-00 150 105 110 170 145 584 445 12 14 20.00
VHMF-01 150 105 110 170 145 255 170 12 14 9.00
VHLF-01 150 105 110 170 145 395 306 12 14 12.00
VHTF-01 150 105 110 170 145 554 442 12 14 20.00
VHMF-02 150 105 110 170 145 260 186 12 14 9.00
VHLF-02 150 105 110 170 145 445 338 12 14 12.00
VHTF-02 150 105 110 170 145 629 490 12 14 20.00
VHMF-03 190 140 150 220 190 265 188 12 18 19.00
VHLF-03 190 140 150 220 190 460 333 12 18 25.00
VHTF-03 190 140 150 220 190 653 478 12 18 31.00
VHMF-04 190 140 150 220 190 270 193 12 18 19.00
VHLF-04 190 140 150 220 190 455 343 12 18 26.00
VHTF-04 190 140 150 220 190 643 493 12 18 31.00
VHMF-05 190 140 150 220 190 280 202 12 18 20.00
VHLF-05 190 140 150 220 190 470 361 12 18 26.00
VHTF-05 190 140 150 220 190 658 520 12 18 31.00
VHMF-06 220 160 180 257 217 300 212 12 18 27.00
VHLF-06 220 160 180 257 217 500 379 12 18 41.00
VHTF-06 220 160 180 257 217 697 546 12 18 52.00
VHMF-07 220 160 180 257 217 305 217 12 18 27.00
VHLF-07 220 160 180 257 217 510 389 12 18 41.00
VHTF-07 220 160 180 257 217 712 561 12 18 52.00
VHMF-08 220 160 180 257 217 330 239 12 18 30.00
VHLF-08 220 160 180 257 217 550 433 12 18 44.00
VHTF-08 220 160 180 257 217 772 627 12 18 55.00
VHMF-09 290 205 220 347 297 345 257 20 23 52.00
VHLF-09 290 205 220 347 297 565 450 20 23 74.00
VHTF-09 290 205 220 347 297 801 643 20 23 94.00
VHMF-10 290 205 220 347 297 365 276 20 23 55.00
VHLF-10 290 205 220 347 297 600 488 20 23 78.00
VHTF-10 290 205 220 347 297 856 700 20 23 99.00
VHMF-11 290 205 220 347 297 370 274 20 23 55.00
VHLF-11 290 205 220 347 297 610 484 20 23 78.00
VHTF-11 290 205 220 347 297 866 694 20 23 100.00
VHMF-12 290 205 220 347 297 385 290 20 23 57.00
VHLF-12 290 205 220 347 297 620 508 20 23 85.00
VHTF-12 290 205 220 347 297 871 726 20 23 110.00
VHMF-13 290 205 220 347 297 420 322 20 23 63.00
VHLF-13 290 205 220 347 297 690 572 20 23 92.00
VHTF-13 290 205 220 347 297 976 822 20 23 121.00
VHMF-14 290 205 220 347 297 460 364 20 23 69.00
VHLF-14 290 205 220 347 297 755 648 20 23 108.00
VHTF-14 290 205 220 347 297 1071 932 20 23 142.00
VHMF-15 290 205 220 347 297 465 379 20 23 71.00
VHLF-15 290 205 220 347 297 775 662 20 23 111.00
VHTF-15 290 205 220 347 297 1001 953 20 23 147.00
VHMF-16 290 205 220 347 297 540 445 20 23 88.00
VHLF-16 290 205 220 347 297 900 789 20 23 138.00
VHTF-16 290 205 220 347 297 1285 1133 20 23 185.00
VHMF-17 290 205 220 368 303 625 521 20 23 104.00
VHLF-17 290 205 220 368 303 1040 929 20 23 167.00
VHTF-17 290 205 220 368 303 1485 1337 20 23 227.00
note 1) Dimension E is independent of the load setting, but varies according to spring travel, and adjustable up to +30(mm).
VH - 17 78
5.4.1 Extension Pipe
Material : Carbon Steel
A b
d
DETAIL A
Dimension : mm
A
3
A
3
Dimension : mm
Size C
Type Applicable Hanger Size Weight(kg)
(Axt)
CP-XP-V-50 50x6t 110 VHXF-0N~02 0.03
CP-XP-V-80 80x6t 150 VHXF-03~05 0.07
180 VHXF-06~08
CP-XP-V-120 120x6t 0.15
220 VHXF-09~17
VH - 1
79 VH -18
< Blanked intentionally >
Dynamic Elements
1.0 Rear Bracket
VH - 1
81
Dynamic Elements
Whenever unplanned dynamic loads occur, the dynamic duty components protect the piping or other components
from any damage.
Unwanted abrupt movement and load of the components in the system can be caused by;
1) Internal excitation : pressure shocks from valve operation, water hammer, pipe breakage, boiler event
2) External excitation : wind load, seismic events, aircraft impact, explosion
Snubber is a device developed to protect high pressure/temperature piping system in power plants and various types of industrial plants.
It functions to restrain undesirable displacement of piping system or components when it oscillates due to seismic or other type dynamic
load, while it allows their free movement during the normal operating mode.
On the other hand, rigid strut sustains the dynamic load, but do not allow movement. However, as it has angular bearings, limited angular
movement is permitted.
For the dynamic duty components, the dynamic loads are grouped as follows;
D
A
B
BSN - 06
E
a
E
Rated Load
a
SIZE 03 ~ 25
(SIZE 03 ~ 25)
Symbol of Rear Bracket SIZE 03 ~ 25
C A
D B
C A
D B
E
a
E
A1 A1
a
Weight Permissible
Type A1 A B C E D a (kg) Load(kN)
BSN-03 - 37 23 38 44 12 4 0.6 3.0
BSN-06 - 37 23 38 44 12 4 0.6 6.0
BSN-1 - 51 27 50 56 15 5 1.1 10.0
BSN-3 - 61 33 60 66 17 6 1.7 30.0
BSN-6 - 75 35 75 83 25 10 4.0 60.0
BSN-10 - 90 39 90 99 30 13 6.6 100.0
BSN-16 - 110 48 110 116 40 17 12.0 160.0
BSN-25 - 145 69 145 150 50 19 23.0 250.0
BSN-40 230 180 80 175 185 60 25 42.5 400.0
BSN-60 270 220 90 210 225 70 28 74.5 600.0
BSN-80 310 260 110 255 280 80 36 137.0 800.0
DE- 1 82
2.0 Rigid Strut
RS - S - 06
2.2 Dimensions
Type S
P
A
RH
T
D C L T J G
C-C 35
Dimension : mm
Type L
H
P
A
RH LH
T
D C L C D G T
C-C 75
G
Dimension : mm
83 DE- 2
Dynamic Elements
3.0 Limit Stop
Limit stop
LS - 16 - EA - 55
Rated Load
Size 03 06 1 3 6 10 16 25
Total stroke(mm) 40 40 50 50 50 55 55 60
Working Mechanism
A limit stop operates via a free stroke that has a function of absorbing thermal movement. Within the range of +-25mm (for a
medium-sized design), the free stroke is adjustable. There is no resistance so the pipe is free to move within this range. Whereas
the movement by dynamic shocks is limited by stops
DE- 3 84
3.2 Dimension
Type FA
dp
A D
Type EA
C-C
Dimensions(mm)
Nominal Stroke
Type C-C Weight(kg)
Load(kN) (mm) A dP D
min max min max
LS-03 3 40 8050 12 47 316 1132 2.90 6.40
LS-06 6 40 8050 12 59 316 1349 3.73 9.40
LS-1 10 50 12575 15 70 374 1746 7.78 20.80
LS-3 30 50 12575 17 87 468 2086 14.57 39.82
LS-6 60 50 15075 25 112 565 2368 26.82 70.18
LS-10 100 55 15075 30 140 647 2740 52.29 143.41
LS-16 160 55 17575 40 166 804 3458 91.79 231.25
LS-25 250 60 17575 50 210 879 4005 152.19 364.00
85 DE-4
Dynamic Elements
4.0 Snubber and Snubber Extension
Snubber
HS - 16 - EA - 150
Rated Load
Snubber Extension
HSE - 16 - 1000
Length(mm)
Rated Load
DE- 5 86
Design Parameters
Design Parameter Criteria
Drag Force 2% of the rated load or 0.5,kN, whichever is greater
Bleed Rate 0.2~2.0(mm/sec)
Lock-Up Rate 2.0~6.0(mm/sec)
Frequency Range 1-33(Hz)
Pressure Capacity 1.5 times of the rated load
Perm. Cycle Under Rated Load 20,000(cycles)
Temperature Max. 70
Recommended Maintenance Once every 10 years
Angular Offset 7.5
4.2 Dimensions
(1) Type FA
H U
R F1
F2
E D
Dimension : mm
E Weight Permissible
Type D F11) F2 R H U(min)2)
min max (kg) load(kN)
HS-06-FA-100 461 561 86 151 60 23 12 12 6.95 6
HS-06-FA-200 561 761 86 151 60 23 12 12 8.64 6
HS-06-FA-300 661 961 86 151 60 23 12 12 10.33 6
HS-1-FA-150 564 714 101 170 75 28 15 15 11.96 10
HS-1-FA-300 714 1014 101 170 75 28 15 15 15.36 10
HS-1-FA-450 864 1314 101 170 75 28 15 15 18.76 10
HS-3-FA-150 650 800 121 199 100 35 17 22 19.98 30
HS-3-FA-300 800 1100 121 199 100 35 17 22 24.63 30
HS-3-FA-450 950 1400 121 199 100 35 17 22 29.28 30
HS-6-FA-150 697 847 143 215 110 40 25 33 31.80 60
HS-6-FA-300 847 1147 143 215 110 40 25 33 39.05 60
HS-6-FA-450 997 1447 143 215 110 40 25 33 46.29 60
HS-10-FA-150 791 941 175 246 135 50 30 45 54.90 100
HS-10-FA-300 941 1241 175 246 135 50 30 45 65.36 100
HS-10-FA-450 1091 1541 175 246 135 50 30 45 75.82 100
HS-16-FA-150 865 1015 207 277 160 65 40 60 90.94 160
HS-16-FA-300 1015 1315 207 277 160 65 40 60 106.09 160
HS-16-FA-450 1165 1615 207 277 160 65 40 60 121.25 160
HS-25-FA-150 979 1129 227 325 200 80 50 80 137.25 250
HS-25-FA-300 1129 1429 227 325 200 80 50 80 156.16 250
HS-25-FA-450 1279 1729 227 325 200 80 50 80 175.07 250
HS-40-FA-150 1135 1285 281 400 255 95 60 90 237.58 400
HS-40-FA-300 1285 1585 281 400 255 95 60 90 268.40 400
HS-40-FA-450 1435 1885 281 400 255 95 60 90 299.22 400
HS-60-FA-150 1238 1388 363 450 285 110 70 100 383.91 600
HS-60-FA-300 1388 1688 363 450 285 110 70 100 429.69 600
HS-60-FA-450 1538 1988 363 450 285 110 70 100 475.47 600
87 DE- 6
Dynamic Elements
H U
C
R F1
L F2 D
E
Dimension : mm
3)
E Weight(kg) Permissible
Type D F11) F2 R H U(min)2) C
min max min max Load(kN)
HS-06-EA-100 621 1160 86 151 60 23 12 12 48.3 8.94 11.12 6
HS-06-EA-200 771 1160 86 151 60 23 12 12 48.3 10.63 12.20 6
HS-06-EA-300 921 1160 86 151 60 23 12 12 48.3 12.32 13.29 6
HS-1-EA-150 756 1469 101 170 75 28 15 15 60.3 14.77 18.65 10
HS-1-EA-300 981 1469 101 170 75 28 15 15 60.3 18.17 20.83 10
HS-1-EA-450 1206 1469 101 170 75 28 15 15 60.3 21.57 23.00 10
HS-3-EA-150 863 1726 121 199 100 35 17 22 73.0 25.42 32.87 30
HS-3-EA-300 1088 1726 121 199 100 35 17 22 73.0 30.07 35.57 30
HS-3-EA-450 1313 1726 121 199 100 35 17 22 73.0 34.72 38.28 30
HS-6-EA-150 937 1857 143 215 110 40 25 33 88.9 41.18 51.57 60
HS-6-EA-300 1162 1857 143 215 110 40 25 33 88.9 48.43 56.28 60
HS-6-EA-450 1387 1857 143 215 110 40 25 33 88.9 55.67 60.98 60
HS-10-EA-150 1054 2020 175 246 135 50 30 45 114.3 70.82 86.35 100
HS-10-EA-300 1279 2020 175 246 135 50 30 45 114.3 81.28 93.20 100
HS-10-EA-450 1504 2020 175 246 135 50 30 45 114.3 91.74 100.04 100
HS-16-EA-150 1164 2163 207 277 160 65 40 60 141.3 121.63 143.37 160
HS-16-EA-300 1389 2163 207 277 160 65 40 60 141.3 136.78 153.62 160
HS-16-EA-450 1614 2163 207 277 160 65 40 60 141.3 151.94 163.89 160
HS-25-EA-150 1316 2329 227 325 200 80 50 80 168.3 184.35 212.98 250
HS-25-EA-300 1541 2329 227 325 200 80 50 80 168.3 203.26 225.53 250
HS-25-EA-450 1766 2329 227 325 200 80 50 80 168.3 222.17 238.08 250
HS-40-EA-150 1512 2510 281 400 255 95 60 90 219.1 324.92 367.38 400
HS-40-EA-300 1737 2510 281 400 255 95 60 90 219.1 355.74 388.63 400
HS-40-EA-450 1962 2510 281 400 255 95 60 90 219.1 386.56 409.88 400
HS-60-EA-150 1670 2663 363 450 285 110 70 100 219.1 502.02 544.27 600
HS-60-EA-300 1895 2663 363 450 285 110 70 100 219.1 547.80 580.47 600
HS-60-EA-450 2120 2663 363 450 285 110 70 100 219.1 593.58 616.68 600
DE- 7 88
(3) Type HSE
H A A
R F1
C1 L
Dimension : mm
L Weight(kg) Permissible
Type C1 A F11) R H
min max min max Load(kN)
HSE-06 261 800 68 30 151 23 12 3.12 5.30 6
HSE-1 287 1000 80 30 170 28 15 4.70 8.58 10
HSE-3 337 1200 98 40 199 35 17 8.79 16.24 30
HSE-6 380 1300 116 50 215 40 25 14.31 24.70 60
HSE-10 434 1400 144 55 246 50 30 24.56 40.09 100
HSE-16 501 1500 180 70 277 65 40 47.31 69.05 160
HSE-25 587 1600 208 80 325 80 50 77.21 105.84 250
HSE-40 702 1700 266 90 400 95 60 136.33 178.80 400
HSE-60 807 1800 274 115 450 110 70 190.06 232.31 600
89 DE- 8
Dynamic Elements
4.3 Additional Type Designation
Snubber
SNA - 16 - EA - 160
Rated Load
Snubber Extension
SNP - 16 - 1000
Length(mm)
Rated Load
DE- 9 90
Design Parameters
Design Parameter Criteria
Drag Force 2% of the rated load or 0.5kN, whichever is greater
Bleed Rate 0.2~2.0(mm/sec)
Lock-Up Rate 2.0~6.0(mm/sec)
Frequency Range 1-33(Hz)
Pressure Capacity 1.5 times of the rated load
Perm. Cycle Under Rated Load 20,000(cycles)
Temperature Max. 70 oC
Recommended Maintenance Once every 10 years
Angular Offset 7.5 o
91 DE- 10
Dynamic Elements
4.4 Dimensions for Additional Type
(1) Type FA
R
2 D
A
D
R2
R
2 D
F1 K U2 U1
A
A2 G
D
R2
L2
F1 K U2 U1
(SIZE 03 ~ 25)
A2 G
R
D
2
L2
(2) Type FB
A
D
R1
R
D
Q
H K U2 U1
A
A2
D
R1
L2
Q
H K U2 U1
A2
L2
(SIZE 40 ~ 60)
Dimension : mm
L2 Weight Permissible
Type A D F1 H G Q R1 R2 U1 K A2 1) U2 (kg)
min max Load(kN)
SNA-03-FA-100 513 613 76.3 12 50 - 55.5 - 18.0 19.0 62 255 451 44 8.0 3.0
SNA-03-FA-160 573 733 76.3 12 50 - 55.5 - 18.0 19.0 62 315 511 44 9.0 3.0
SNA-03-FA-250 663 913 76.3 12 50 - 55.5 - 18.0 19.0 62 405 601 44 11.0 3.0
SNA-06-FA-100 523 623 89.1 12 50 - 61.5 - 20.0 19.0 62 255 461 48 10.0 6.0
SNA-06-FA-160 583 743 89.1 12 50 - 61.5 - 20.0 19.0 62 315 521 48 12.0 6.0
SNA-06-FA-250 673 923 89.1 12 50 - 61.5 - 20.0 19.0 62 405 611 48 14.0 6.0
SNA-1-FA-100 530 630 101.6 15 55 - 68.5 - 24.0 25.0 69 250 461 48 13.0 10.0
SNA-1-FA-160 590 750 101.6 15 55 - 68.5 - 24.0 25.0 69 310 521 48 15.0 10.0
SNA-1-FA-250 680 930 101.6 15 55 - 68.5 - 24.0 25.0 69 400 611 48 18.0 10.0
SNA-3-FA-100 621 721 139.8 17 74 - 87.5 - 31.5 32.5 80 293 541 58 27.0 30.0
SNA-3-FA-160 681 841 139.8 17 74 - 87.5 - 31.5 32.5 80 353 601 58 30.0 30.0
SNA-3-FA-250 771 1021 139.8 17 74 - 87.5 - 31.5 32.5 80 443 691 58 34.0 30.0
SNA-3-FA-310 831 1141 139.8 17 74 - 87.5 - 31.5 32.5 80 503 751 58 37.0 30.0
SNA-6-FA-100 699 799 165.2 25 87 - 100.5 - 41.5 37.5 85 338 614 64 45.0 60.0
SNA-6-FA-160 759 919 165.2 25 87 - 100.5 - 41.5 37.5 85 398 674 64 49.0 60.0
SNA-6-FA-250 849 1099 165.2 25 87 - 100.5 - 41.5 37.5 85 488 764 64 55.0 60.0
SNA-6-FA-310 909 1219 165.2 25 87 - 100.5 - 41.5 37.5 85 548 824 64 59.0 60.0
SNA-10-FA-100 767 867 190.7 30 108 - 113.5 - 54.0 50.0 98 360 669 70 67.0 100.0
SNA-10-FA-160 827 987 190.7 30 108 - 113.5 - 54.0 50.0 98 420 729 70 72.0 100.0
SNA-10-FA-250 917 1167 190.7 30 108 - 113.5 - 54.0 50.0 98 510 819 70 81.0 100.0
SNA-10-FA-310 977 1287 190.7 30 108 - 113.5 - 54.0 50.0 98 570 879 70 86.0 100.0
SNA-16-FA-100 855 955 216.3 40 130 - 126.5 - 63.0 62.5 117 393 738 76 99.0 160.0
SNA-16-FA-160 915 1075 216.3 40 130 - 126.5 - 63.0 62.5 117 453 798 76 106.0 160.0
SNA-16-FA-250 1005 1255 216.3 40 130 - 126.5 - 63.0 62.5 117 543 888 76 116.0 160.0
SNA-16-FA-310 1065 1375 216.3 40 130 - 126.5 - 63.0 62.5 117 603 948 76 123.0 160.0
SNA-25-FA-100 941 1041 267.4 50 160 - 152.5 - 73.0 75.0 133 418 808 84 160.0 250.0
SNA-25-FA-160 1001 1161 267.4 50 160 - 152.5 - 73.0 75.0 133 478 868 84 170.0 250.0
SNA-25-FA-250 1091 1341 267.4 50 160 - 152.5 - 73.0 75.0 133 568 958 84 186.0 250.0
SNA-25-FA-310 1151 1461 267.4 50 160 - 152.5 - 73.0 75.0 133 628 1018 84 197.0 250.0
SNA-40-FB-100 1060 1160 230.0 60 - 299 - 300 80.0 80.0 172 385 888 73 182.0 400.0
SNA-40-FB-160 1180 1340 230.0 60 - 359 - 300 80.0 80.0 172 445 1008 73 195.0 400.0
SNA-40-FB-250 1360 1610 230.0 60 - 449 - 300 80.0 80.0 172 535 1188 73 214.0 400.0
SNA-60-FB-100 1173 1273 270.0 70 - 348 - 340 93.0 93.0 196 415 977 79 276.0 600.0
SNA-60-FB-160 1293 1453 270.0 70 - 408 - 340 93.0 93.0 196 475 1097 79 294.0 600.0
SNA-60-FB-250 1473 1723 270.0 70 - 498 - 340 93.0 93.0 196 565 1277 79 320.0 600.0
DE- 11 92
(3) Type EA with Type SNP
M
a
R
2 H
G
D
E1 M
B a
R
2 L
SNP a
E
H
A 03 4
G
A1 U1
D
06 4
L1
1 4
B E1
(SIZE 03 ~ 25) 3 4
L 6 6
E M
10 8
a
A1 U1 16 10
R
2
(4) Type EB with Type SNP L1 25 12
40 16
H
D 60 20
a M
R B E1
2
H
D E
A1 U1
B E1 L1
E
A1 U1
L1
(SIZE 40 ~ 60)
Dimension : mm
L1 1)
Weight Permissible
Type A M D E E1 H R2 B G A1min U1
min max (kg) Load(kN)
SNA-03-EA-100 642 1340 76.3 M16 12 49 28 27.2 19 42 22.0 450 62 8.0 3.0
SNA-03-EA-160 732 1340 76.3 M16 12 49 28 27.2 19 42 22.0 510 62 9.0 3.0
SNA-03-EA-250 867 1340 76.3 M16 12 49 28 27.2 19 42 22.0 600 62 11.0 3.0
SNA-06-EA-100 659 1567 89.1 M20 12 56 35 34.0 19 42 22.0 467 62 10.0 6.0
SNA-06-EA-160 749 1567 89.1 M20 12 56 35 34.0 19 42 22.0 527 62 12.0 6.0
SNA-06-EA-250 884 1567 89.1 M20 12 56 35 34.0 19 42 22.0 617 62 14.0 6.0
SNA-1-EA-100 683 1861 101.6 M20 15 68 44 42.7 25 47 26.0 474 69 13.0 10.0
SNA-1-EA-160 773 1861 101.6 M20 15 68 44 42.7 25 47 26.0 534 69 15.0 10.0
SNA-1-EA-250 908 1861 101.6 M20 15 68 44 42.7 25 47 26.0 624 69 18.0 10.0
SNA-3-EA-100 811 2187 139.8 M30 17 94 62 60.5 33 70 31.5 561 80 27.0 30.0
SNA-3-EA-160 901 2187 139.8 M30 17 94 62 60.5 33 70 31.5 621 80 30.0 30.0
SNA-3-EA-250 1036 2187 139.8 M30 17 94 62 60.5 33 70 31.5 711 80 34.0 30.0
SNA-3-EA-310 1126 2187 139.8 M30 17 94 62 60.5 33 70 31.5 771 80 37.0 30.0
SNA-6-EA-100 906 2441 165.2 M36 25 114 78 76.3 38 70 34.0 641 85 45.0 60.0
SNA-6-EA-160 996 2441 165.2 M36 25 114 78 76.3 38 70 34.0 701 85 49.0 60.0
SNA-6-EA-250 1131 2441 165.2 M36 25 114 78 76.3 38 70 34.0 791 85 55.0 60.0
SNA-6-EA-310 1221 2441 165.2 M36 25 114 78 76.3 38 70 34.0 851 85 59.0 60.0
SNA-10-EA-100 1002 2784 190.7 M42 30 133 91 89.1 50 87 38.0 694 98 67.0 100.0
SNA-10-EA-160 1092 2784 190.7 M42 30 133 91 89.1 50 87 38.0 754 98 72.0 100.0
SNA-10-EA-250 1227 2784 190.7 M42 30 133 91 89.1 50 87 38.0 844 98 81.0 100.0
SNA-10-EA-310 1317 2784 190.7 M42 30 133 91 89.1 50 87 38.0 904 98 86.0 100.0
SNA-16-EA-100 1130 3418 216.3 M48 40 165 116 114.3 63 106 47.0 773 117 99.0 160.0
SNA-16-EA-160 1220 3418 216.3 M48 40 165 116 114.3 63 106 47.0 833 117 106.0 160.0
SNA-16-EA-250 1355 3418 216.3 M48 40 165 116 114.3 63 106 47.0 923 117 116.0 160.0
SNA-16-EA-310 1445 3418 216.3 M48 40 165 116 114.3 63 106 47.0 983 117 123.0 160.0
SNA-25-EA-100 1256 3950 267.4 M56 50 195 142 139.8 75 129 68.0 843 133 160.0 250.0
SNA-25-EA-160 1346 3950 267.4 M56 50 195 142 139.8 75 129 68.0 903 133 170.0 250.0
SNA-25-EA-250 1481 3950 267.4 M56 50 195 142 139.8 75 129 68.0 993 133 186.0 250.0
SNA-25-EA-310 1571 3950 267.4 M56 50 195 142 139.8 75 129 68.0 1053 133 197.0 250.0
SNA-40-EB-100 1297 1920 230.0 M60 60 241 70 139.8 80 165 53.0 830 172 242.0 400.0
SNA-40-EB-160 1387 2010 230.0 M60 60 241 70 139.8 80 165 53.0 890 172 253.0 400.0
SNA-40-EB-250 1522 2145 230.0 M60 60 241 70 139.8 80 165 53.0 980 172 269.0 400.0
SNA-60-EB-100 1472 2020 270.0 M68 70 312 80 165.2 93 195 58.0 941 196 366.0 600.0
SNA-60-EB-160 1562 2110 270.0 M68 70 312 80 165.2 93 195 58.0 1001 196 382.0 600.0
SNA-60-EB-250 1697 2245 270.0 M68 70 312 80 165.2 93 195 58.0 1091 196 404.0 600.0
note 1) Length at the middle position.
DE- 7 93 DE- 12
Dynamic Elements
R2
H
D
R
2
(SIZE 03 ~ 60)
Dimension : mm
DE- 13 94 DE- 8
5.0 Dynamic Clamp
note 1) For Dimension A and G, refer to Dimension Table(DE-19, DE-21, DE-23, DE-25, DE-27, DE-29, DE-31)
DE- 9 95 DE- 14
Dynamic Elements
5.2 Dimensions
(1) Type PCDC
Material : Carbon Steel
Applicable Temperature : up to 350
d1 d1 d1 d1 d1 d1
E
E
. .
A
A
. . .D .D
.D .D O O
O O
A
A
F W F F W T W T FW T W T W
Dimension : mm
DE- 15 96 DE- 10
(2) Type PCDAL
d1 d1 d1 d1 d1 d1
E
E
A
A
. . . .
.D .D .D .D
O O O O
A
A
F W F F W T W F W T W T W
Dimension : mm
97 DE- 16
Dynamic Elements
(3) Type PCDAM
Material : Alloy Steel(A387 Gr.22)
Applicable Temperature : 538
d1 d1 d1 d1 d1 d1
E
E
A
A
. . . .
.D .D .D .D
O O O O
A
A
F W F F W T W T F W T W T W
Dimension : mm
DE- 17 98
(4) Type PCDAH
Material : Alloy Steel(A387 Gr.22)
Applicable Temperature : 580
d1 d1 d1 d1 d1 d1
E
E
A
A
. . . .
.D .D .D .D
O O O O
A
A
F W F F W T W TF W T W T W
Dimension : mm
99 DE- 18
Dynamic Elements
(5) Type PCDYC
Material : Carbon Steel
Applicable Temperature : 399
P2 P1
G G
E
A
Dimension : mm
DE- 19 100
Continued Dimension : mm
101 DE- 20
Dynamic Elements
(6) Type PCDYA2L
Material : Alloy Steel(A387 Gr.22)
Applicable Temperature : 450
P2 P1
G G
E
A
Dimension : mm
P2 P1
G G
E
A
Dimension : mm
P2 P1
G G
E
A
Dimension : mm
P2 P1
G G
E
A
Dimension : mm
P2 P1
G G
E
A
Dimension : mm
P2 P1
G G
E
A
Dimension : mm
A2
A1
A1
A
L1
L1
L
L
d t
d t
H/2
He
H/2
He
E
E
H
H
B B
PCDRC-XXX-03,06,1,3,6,10 PCDRC-XXX-16,25,40,60
Dimension : mm
O.D. Weight(kg)
Type NPS Lmin Lmax L1min L1max B H He dt E A1 A2 Permissible
(mm) Load(kN) at Lmin at Lmax
PCDRC-25-03 1 33.4 300 650 450 800 60 120 60 20 74 66 120 6.0 6.48 9.44
PCDRC-25-06 1 33.4 300 650 450 800 75 150 75 20 82 66 120 12.0 7.75 11.46
PCDRC-25-1 1 33.4 350 650 510 810 75 150 75 20 96 74 140 20.0 14.36 19.66
PCDRC-40-03 1 1/2 48.3 300 650 450 800 50 100 50 30 70 81 130 6.0 6.00 8.47
PCDRC-40-06 1 1/2 48.3 300 650 450 800 60 120 60 30 76 81 130 12.0 6.94 9.91
PCDRC-40-1 1 1/2 48.3 350 650 510 810 60 120 60 30 90 89 160 20.0 12.80 17.04
PCDRC-40-3 1 1/2 48.3 350 650 520 820 100 200 100 30 120 89 170 60.0 21.59 28.65
PCDRC-50-03 2 60.3 350 700 500 850 60 120 60 35 75 93 150 6.0 7.28 10.24
PCDRC-50-06 2 60.3 350 700 500 850 60 120 60 35 76 93 150 12.0 7.57 10.53
PCDRC-50-1 2 60.3 350 700 510 860 60 120 60 35 90 101 170 20.0 13.12 18.07
PCDRC-50-3 2 60.3 400 700 570 870 100 200 100 35 120 101 190 60.0 23.30 30.36
PCDRC-65-03 2 1/2 73.0 350 750 500 900 60 120 60 44 77 105 160 6.0 7.78 11.17
PCDRC-65-06 2 1/2 73.0 350 750 500 900 60 120 60 44 77 105 160 12.0 7.78 11.17
PCDRC-65-1 2 1/2 73.0 350 750 510 910 60 120 60 44 91 113 180 20.0 13.46 19.11
PCDRC-65-3 2 1/2 73.0 400 750 570 920 100 200 100 44 121 113 200 60.0 23.86 32.11
PCDRC-80-03 3 88.9 350 950 500 1100 60 120 60 50 78 121 170 6.0 8.04 13.13
PCDRC-80-06 3 88.9 350 950 500 1100 75 150 75 50 87 121 170 12.0 9.80 16.16
PCDRC-80-1 3 88.9 400 950 560 1110 75 150 75 50 98 129 200 20.0 16.73 26.45
PCDRC-80-3 3 88.9 400 950 570 1120 125 250 125 50 136 129 210 60.0 29.30 45.49
PCDRC-80-6 3 88.9 450 950 650 1150 135 270 135 50 158 139 240 120.0 53.13 76.97
PCDRC-100-03 4 114.3 400 1100 550 1250 75 150 75 62 85 147 200 6.0 10.14 17.56
PCDRC-100-06 4 114.3 400 1100 550 1250 75 150 75 62 87 147 200 12.0 10.86 18.28
PCDRC-100-1 4 114.3 400 1100 560 1260 75 150 75 62 99 155 220 20.0 17.42 29.78
PCDRC-100-3 4 114.3 450 1100 620 1270 125 250 125 62 137 155 240 60.0 32.06 51.19
PCDRC-100-6 4 114.3 450 1100 650 1300 150 300 150 62 165 165 270 120.0 58.90 93.34
PCDRC-125-03 5 141.3 400 1150 550 1300 75 150 75 62 85 172 220 6.0 10.56 18.51
PCDRC-125-06 5 141.3 400 1150 550 1300 75 150 75 62 87 172 220 12.0 11.39 19.34
PCDRC-125-1 5 141.3 450 1150 610 1310 75 150 75 62 102 180 250 20.0 20.08 32.44
PCDRC-125-3 5 141.3 450 1150 620 1320 125 250 125 62 138 180 260 60.0 33.35 53.95
PCDRC-125-6 5 141.3 500 1150 700 1350 150 300 150 62 171 190 290 120.0 66.66 101.10
PCDRC-150-03 6 168.3 450 1200 600 1350 75 150 75 91 88 201 250 6.0 12.51 20.46
PCDRC-150-06 6 168.3 450 1200 600 1350 90 180 90 91 94 201 250 12.0 13.90 23.44
PCDRC-150-1 6 168.3 450 1200 610 1360 90 180 90 91 108 209 280 20.0 23.36 39.25
PCDRC-150-3 6 168.3 500 1200 670 1370 125 250 125 91 138 219 300 60.0 47.25 78.16
PCDRC-150-6 6 168.3 500 1200 700 1400 150 300 150 91 171 219 320 120.0 69.16 106.25
PCDRC-150-10 6 168.3 550 1200 780 1430 175 350 175 91 196 229 330 200.0 108.49 162.06
PCDRC-150-16 6 168.3 650 1000 890 1240 175 350 175 91 254 239 360 320.0 166.68 202.74
PCDRC-200-03 8 219.1 500 1250 650 1400 75 150 75 91 88 252 300 6.0 14.10 22.05
PCDRC-200-06 8 219.1 500 1250 650 1400 90 180 90 91 97 252 300 12.0 16.77 26.30
PCDRC-200-1 8 219.1 500 1250 660 1410 75 150 75 91 102 270 340 20.0 29.91 49.78
PCDRC-200-3 8 219.1 550 1250 720 1420 125 250 125 91 141 270 350 60.0 53.85 84.76
PCDRC-200-6 8 219.1 550 1250 750 1450 150 300 150 91 172 280 380 120.0 91.25 140.70
O.D. Weight(kg)
Type NPS Lmin Lmax L1min L1max B H He dt E A1 A2 Permissible
(mm) Load(kN) at Lmin at Lmax
PCDRC-200-10 8 219.1 600 1250 830 1480 175 350 175 91 197 280 380 200.0 117.85 171.42
PCDRC-200-16 8 219.1 700 1050 940 1290 175 350 175 91 265 290 410 320.0 186.63 222.69
PCDRC-250-03 10 273.1 550 1400 700 1550 100 200 100 116 99 326 380 6.0 18.85 30.86
PCDRC-250-06 10 273.1 550 1400 700 1550 100 200 100 116 102 326 380 12.0 20.34 32.35
PCDRC-250-1 10 273.1 550 1400 710 1560 100 200 100 116 116 344 410 20.0 42.41 72.44
PCDRC-250-3 10 273.1 600 1400 770 1570 125 250 125 116 144 344 430 60.0 62.55 97.87
PCDRC-250-6 10 273.1 600 1400 800 1600 150 300 150 116 173 354 450 120.0 101.25 157.77
PCDRC-250-10 10 273.1 650 1400 880 1630 185 370 185 116 207 354 450 200.0 141.33 206.69
PCDRC-250-16 10 273.1 750 1100 990 1340 200 400 200 116 290 364 490 320.0 234.73 275.95
PCDRC-250-25 10 273.1 800 1100 1070 1370 225 450 225 116 336 364 490 500.0 326.21 365.95
PCDRC-300-03 12 323.9 600 1450 750 1600 130 260 130 170 113 376 430 6.0 24.12 39.73
PCDRC-300-06 12 323.9 600 1450 750 1600 130 260 130 170 115 376 430 12.0 25.83 41.44
PCDRC-300-1 12 323.9 600 1450 760 1610 130 260 130 170 129 376 440 20.0 32.16 47.77
PCDRC-300-3 12 323.9 650 1450 820 1620 150 300 150 170 155 394 480 60.0 76.02 118.41
PCDRC-300-6 12 323.9 650 1450 850 1650 175 350 175 170 189 394 490 120.0 107.41 156.87
PCDRC-300-10 12 323.9 700 1450 930 1680 185 370 185 170 208 404 500 200.0 151.88 217.24
PCDRC-300-16 12 323.9 800 1200 1040 1440 200 400 200 170 292 414 540 320.0 250.85 297.95
PCDRC-300-25 12 323.9 850 1200 1120 1470 235 470 235 170 342 414 540 500.0 355.34 403.76
PCDRC-350-1 14 355.6 650 1500 810 1660 130 260 130 170 130 416 480 20.0 45.03 71.05
PCDRC-350-3 14 355.6 650 1500 820 1670 150 300 150 170 156 426 510 60.0 78.02 123.06
PCDRC-350-6 14 355.6 700 1500 900 1700 175 350 175 170 190 426 530 120.0 113.77 163.22
PCDRC-350-10 14 355.6 750 1500 980 1730 200 400 200 170 214 436 540 200.0 167.94 238.59
PCDRC-350-16 14 355.6 850 1250 1090 1490 200 400 200 170 293 446 570 320.0 263.11 310.21
PCDRC-350-25 14 355.6 900 1250 1170 1520 250 500 250 170 349 446 570 500.0 383.38 434.90
PCDRC-400-1 16 406.4 700 1600 860 1760 130 260 130 170 130 467 540 20.0 48.48 76.04
PCDRC-400-3 16 406.4 700 1600 870 1770 150 300 150 170 159 477 560 60.0 87.00 134.69
PCDRC-400-6 16 406.4 750 1600 950 1800 185 370 185 170 195 477 580 120.0 125.88 181.42
PCDRC-400-10 16 406.4 850 1600 1110 1860 200 400 200 170 214 487 590 200.0 200.69 271.34
PCDRC-400-16 16 406.4 900 1400 1140 1640 225 450 225 170 305 497 620 320.0 298.09 364.32
PCDRC-400-25 16 406.4 950 1400 1220 1670 250 500 250 170 352 497 620 500.0 405.75 471.98
PCDRC-400-40 16 406.4 1050 1400 1360 1710 300 600 300 170 393 507 660 800.0 614.10 688.28
PCDRC-450-1 18 457.2 750 1700 910 1860 130 260 130 170 130 518 590 20.0 51.94 81.03
PCDRC-450-3 18 457.2 750 1700 920 1870 150 300 150 170 159 528 610 60.0 93.18 143.52
PCDRC-450-6 18 457.2 800 1700 1000 1900 185 370 185 170 195 528 630 120.0 134.38 193.20
PCDRC-450-10 18 457.2 900 1700 1160 1960 200 400 200 170 215 538 640 200.0 213.03 288.39
PCDRC-450-16 18 457.2 950 1600 1190 1840 225 450 225 170 307 548 670 320.0 314.94 401.04
PCDRC-450-25 18 457.2 1000 1600 1270 1870 275 550 275 170 365 548 670 500.0 449.39 546.53
PCDRC-450-40 18 457.2 1100 1600 1410 1910 325 650 325 170 406 558 710 800.0 674.28 789.08
PCDRC-500-1 20 508.0 800 1800 960 1960 170 340 170 221 151 568 640 20.0 68.61 108.65
PCDRC-500-3 20 508.0 800 1800 970 1970 170 340 170 221 168 578 660 60.0 106.97 167.02
PCDRC-500-6 20 508.0 850 1800 1050 2000 200 400 200 221 202 578 680 120.0 149.13 216.25
PCDRC-500-10 20 508.0 1000 1800 1310 2110 215 430 215 221 219 588 690 200.0 273.65 354.67
PCDRC-500-16 20 508.0 1000 1650 1240 1890 250 500 250 221 318 598 720 320.0 352.37 448.04
PCDRC-500-25 20 508.0 1050 1650 1320 1920 275 550 275 221 375 598 720 500.0 495.78 592.92
PCDRC-500-40 20 508.0 1150 1650 1460 1960 325 650 325 221 407 608 760 800.0 706.76 821.56
PCDRC-550-1 22 558.8 850 1900 1010 2060 170 340 170 221 152 619 690 20.0 72.82 114.86
PCDRC-550-3 22 558.8 850 1900 1020 2070 170 340 170 221 174 629 710 60.0 121.65 184.71
PCDRC-550-6 22 558.8 950 1900 1170 2120 200 400 200 221 202 629 730 120.0 175.07 242.18
PCDRC-550-10 22 558.8 1050 1900 1360 2210 225 450 225 221 224 639 740 200.0 295.84 385.91
PCDRC-550-16 22 558.8 1050 1750 1290 1990 250 500 250 221 319 649 770 320.0 369.95 472.98
PCDRC-550-25 22 558.8 1100 1750 1370 2020 300 600 300 221 387 649 770 500.0 543.79 658.59
PCDRC-550-40 22 558.8 1200 1750 1510 2060 325 650 325 221 409 659 810 800.0 739.24 865.53
PCDRC-600-1 24 609.6 900 2000 1060 2160 170 340 170 221 152 670 740 20.0 77.03 121.06
PCDRC-600-3 24 609.6 900 2000 1070 2170 200 400 200 221 188 680 760 60.0 141.47 219.19
PCDRC-600-6 24 609.6 1000 2000 1220 2220 215 430 215 221 209 680 780 120.0 191.99 267.94
PCDRC-600-10 24 609.6 1100 2000 1410 2310 225 450 225 221 225 690 790 200.0 311.16 406.53
PCDRC-600-16 24 609.6 1100 1800 1340 2040 250 500 250 221 320 700 820 320.0 387.54 490.57
PCDRC-600-25 24 609.6 1150 1800 1420 2070 300 600 300 221 388 700 820 500.0 569.54 684.35
PCDRC-600-40 24 609.6 1250 1800 1560 2110 350 700 350 221 430 710 860 800.0 835.32 971.32
PCDRC-600-60 24 609.6 1300 1800 1650 2150 350 700 350 221 481 730 900 1200.0 1185.47 1350.32
PCDRC-650-1 26 660.4 950 2100 1110 2260 215 430 215 275 173 721 790 20.0 94.36 152.58
PCDRC-650-3 26 660.4 1000 2100 1170 2270 215 430 215 275 195 721 810 60.0 127.38 183.08
PCDRC-650-6 26 660.4 1100 2100 1350 2350 225 450 225 275 213 731 830 120.0 234.55 314.03
PCDRC-650-10 26 660.4 1150 2100 1460 2410 250 500 250 275 237 741 840 200.0 345.53 457.39
PCDRC-650-16 26 660.4 1150 1900 1390 2140 250 500 250 275 331 751 880 320.0 424.47 534.86
PCDRC-650-25 26 660.4 1200 1900 1470 2170 300 600 300 275 404 751 880 500.0 638.84 762.48
PCDRC-650-40 26 660.4 1300 1900 1610 2210 350 700 350 275 431 761 910 800.0 870.92 1019.28
PCDRC-650-60 26 660.4 1350 1900 1700 2250 375 750 375 275 493 781 950 1200.0 1278.23 1472.51
O.D. Weight(kg)
Type NPS Lmin Lmax L1min L1max B H He dt E A1 A2 Permissible
(mm) Load(kN) at Lmin at Lmax
PCDRC-700-1 28 711.2 1000 2300 1160 2460 210 420 210 275 172 772 840 20.0 97.56 161.85
PCDRC-700-3 28 711.2 1050 2300 1220 2470 210 420 210 275 194 772 860 60.0 132.48 194.30
PCDRC-700-6 28 711.2 1150 2300 1400 2550 235 470 235 275 218 782 880 120.0 251.64 347.11
PCDRC-700-10 28 711.2 1300 2300 1660 2660 250 500 250 275 236 792 890 200.0 417.31 535.06
PCDRC-700-16 28 711.2 1200 1950 1440 2190 275 550 275 275 342 802 930 320.0 467.10 588.53
PCDRC-700-25 28 711.2 1250 1950 1520 2220 325 650 325 275 415 802 930 500.0 692.90 826.85
PCDRC-700-40 28 711.2 1350 1950 1660 2260 350 700 350 275 432 812 960 800.0 906.52 1054.88
PCDRC-700-60 28 711.2 1400 1950 1750 2300 375 750 375 275 494 832 1000 1200.0 1326.43 1520.72
PCDRC-750-1 30 762.0 1050 2500 1210 2660 250 500 250 326 191 822 890 20.0 115.08 200.45
PCDRC-750-3 30 762.0 1100 2500 1270 2670 250 500 250 326 213 822 910 60.0 152.53 234.95
PCDRC-750-6 30 762.0 1200 2500 1450 2750 250 500 250 326 226 832 930 120.0 271.96 386.77
PCDRC-750-10 30 762.0 1350 2500 1710 2860 325 650 325 326 269 842 940 200.0 502.79 678.83
PCDRC-750-16 30 762.0 1250 2150 1490 2390 325 650 325 326 390 852 980 320.0 591.21 763.42
PCDRC-750-25 30 762.0 1300 2150 1570 2420 325 650 325 326 427 852 980 500.0 755.12 917.77
PCDRC-750-40 30 762.0 1400 2150 1710 2460 350 700 350 326 445 872 1020 800.0 1061.18 1277.55
PCDRC-750-60 30 762.0 1450 2150 1800 2500 400 800 400 326 512 882 1050 1200.0 1445.77 1709.53
PCDRC-800-1 32 812.8 1100 2700 1260 2860 250 500 250 326 194 873 940 20.0 125.13 219.33
PCDRC-800-3 32 812.8 1150 2700 1320 2870 250 500 250 326 213 873 960 60.0 159.64 250.90
PCDRC-800-6 32 812.8 1300 2700 1580 2980 260 520 260 326 230 883 980 120.0 322.76 451.35
PCDRC-800-10 32 812.8 1400 2700 1760 3060 325 650 325 326 271 893 990 200.0 522.86 721.86
PCDRC-800-16 32 812.8 1300 2250 1540 2490 325 650 325 326 391 903 1030 320.0 615.47 797.25
PCDRC-800-25 32 812.8 1350 2250 1620 2520 350 700 350 326 439 903 1030 500.0 813.56 999.01
PCDRC-800-40 32 812.8 1450 2250 1760 2560 350 700 350 326 446 923 1070 800.0 1101.07 1331.86
PCDRC-800-60 32 812.8 1500 2250 1850 2600 400 800 400 326 514 933 1110 1200.0 1496.43 1779.03
PCDRC-850-1 34 863.6 1150 2800 1310 2960 250 500 250 326 194 924 990 20.0 130.56 227.70
PCDRC-850-3 34 863.6 1200 2800 1370 2970 250 500 250 326 214 924 1010 60.0 166.75 260.95
PCDRC-850-6 34 863.6 1350 2800 1630 3080 260 520 260 326 231 934 1030 120.0 336.42 469.60
PCDRC-850-10 34 863.6 1450 2800 1830 3180 325 650 325 326 270 944 1040 200.0 564.14 770.79
PCDRC-850-16 34 863.6 1350 2350 1590 2590 325 650 325 326 392 954 1080 320.0 639.73 831.07
PCDRC-850-25 34 863.6 1400 2350 1670 2620 325 650 325 326 429 964 1090 500.0 890.01 1108.14
PCDRC-850-40 34 863.6 1500 2350 1810 2660 375 750 375 326 458 974 1120 800.0 1183.24 1445.97
PCDRC-850-60 34 863.6 1550 2350 1900 2700 425 850 425 326 525 984 1160 1200.0 1598.32 1918.60
PCDRC-900-1 36 914.4 1200 2900 1360 3060 250 500 250 326 194 975 1040 20.0 135.99 236.08
PCDRC-900-3 36 914.4 1250 2900 1420 3070 250 500 250 326 214 975 1060 60.0 173.87 271.01
PCDRC-900-6 36 914.4 1400 2900 1680 3180 260 520 260 326 231 985 1090 120.0 350.08 487.84
PCDRC-900-10 36 914.4 1500 2900 1880 3280 325 650 325 326 271 995 1100 200.0 585.17 799.47
PCDRC-900-16 36 914.4 1400 2400 1640 2640 325 650 325 326 392 1005 1130 320.0 663.99 855.33
PCDRC-900-25 36 914.4 1450 2400 1720 2670 350 700 350 326 440 1015 1140 500.0 957.55 1192.46
PCDRC-900-40 36 914.4 1550 2400 1860 2710 375 750 375 326 458 1025 1170 800.0 1224.16 1486.89
PCDRC-900-60 36 914.4 1600 2400 1950 2750 425 850 425 326 536 1035 1210 1200.0 1703.13 2023.41
PCDRC-950-1 38 965.2 1400 2950 1560 3110 275 550 275 358 206 1026 1090 20.0 160.46 260.84
PCDRC-950-3 38 965.2 1450 2950 1640 3140 275 550 275 358 225 1036 1120 60.0 278.45 424.16
PCDRC-950-6 38 965.2 1500 2950 1800 3250 300 600 300 358 248 1036 1140 120.0 418.11 571.78
PCDRC-950-10 38 965.2 1600 2950 2010 3360 375 750 375 358 291 1046 1150 200.0 701.37 939.82
PCDRC-950-16 38 965.2 1400 2400 1640 2640 325 650 325 358 392 1056 1180 320.0 678.68 870.02
PCDRC-950-25 38 965.2 1450 2400 1720 2670 350 700 350 358 440 1066 1190 500.0 979.26 1214.17
PCDRC-950-40 38 965.2 1550 2400 1860 2710 375 750 375 358 458 1076 1220 800.0 1249.63 1512.36
PCDRC-950-60 38 965.2 1600 2400 1950 2750 425 850 425 358 536 1086 1260 1200.0 1737.50 2057.78
PCDRC-1000-1 40 1016.0 1400 3000 1560 3160 275 550 275 358 206 1076 1140 20.0 162.95 266.57
PCDRC-1000-3 40 1016.0 1450 3000 1640 3190 275 550 275 358 225 1086 1170 60.0 283.58 434.15
PCDRC-1000-6 40 1016.0 1500 3000 1800 3300 300 600 300 358 248 1086 1190 120.0 428.14 587.10
PCDRC-1000-10 40 1016.0 1650 3000 2060 3410 375 750 375 358 292 1096 1200 200.0 725.01 963.45
PCDRC-1000-16 40 1016.0 1400 2550 1640 2790 325 650 325 358 393 1106 1230 320.0 693.37 913.41
PCDRC-1000-25 40 1016.0 1450 2550 1720 2820 350 700 350 358 441 1116 1240 500.0 1000.97 1272.97
PCDRC-1000-40 40 1016.0 1550 2550 1860 2860 375 750 375 358 460 1126 1270 800.0 1275.10 1584.19
PCDRC-1000-60 40 1016.0 1600 2550 1950 2900 425 850 425 358 538 1136 1310 1200.0 1771.88 2152.21
A2
A1
A1
A
L1
L1
L
L
d t
d t
H/2
He
H/2
He
E
E
H
H
B B
PCDRA2L-XXX-03,06,1,3,6,10 PCDRA2L-XXX-16,25,40,60
Dimension : mm
O.D. Weight(kg)
Type NPS Lmin Lmax L1min L1max B H He dt E A1 A2 Permissible
(mm) Load(kN) at Lmin at Lmax
PCDRA2L-25-03 1 33.4 300 600 450 750 50 100 50 20 70 66 120 6.0 5.78 7.90
PCDRA2L-25-06 1 33.4 300 600 450 750 50 100 50 20 72 66 120 12.0 6.01 8.13
PCDRA2L-25-1 1 33.4 350 650 510 810 60 120 60 20 90 74 140 20.0 12.39 16.63
PCDRA2L-40-03 1 1/2 48.3 300 700 450 850 50 100 50 30 71 81 130 6.0 5.99 8.82
PCDRA2L-40-06 1 1/2 48.3 300 700 450 850 50 100 50 30 72 81 130 12.0 6.25 9.08
PCDRA2L-40-1 1 1/2 48.3 350 700 510 860 50 100 50 30 87 89 160 20.0 11.50 15.63
PCDRA2L-40-3 1 1/2 48.3 350 700 520 870 100 200 100 30 120 89 170 60.0 21.58 29.83
PCDRA2L-50-03 2 60.3 350 700 500 850 50 100 50 35 71 93 150 6.0 6.51 8.98
PCDRA2L-50-06 2 60.3 350 700 500 850 50 100 50 35 72 93 150 12.0 6.80 9.28
PCDRA2L-50-1 2 60.3 350 700 510 860 50 100 50 35 87 101 170 20.0 11.83 15.95
PCDRA2L-50-3 2 60.3 400 700 570 870 100 200 100 35 120 101 190 60.0 23.29 30.36
PCDRA2L-65-03 2 1/2 73.0 350 750 500 900 60 120 60 44 77 105 160 6.0 7.77 11.16
PCDRA2L-65-06 2 1/2 73.0 350 750 500 900 75 150 75 44 83 105 160 12.0 8.93 13.17
PCDRA2L-65-1 2 1/2 73.0 350 750 510 910 75 150 75 44 97 113 180 20.0 15.42 22.48
PCDRA2L-65-3 2 1/2 73.0 400 750 570 920 100 200 100 44 121 113 200 60.0 23.86 32.10
PCDRA2L-80-03 3 88.9 350 950 500 1100 60 120 60 50 78 121 170 6.0 8.03 13.12
PCDRA2L-80-06 3 88.9 350 950 500 1100 75 150 75 50 87 121 170 12.0 9.80 16.16
PCDRA2L-80-1 3 88.9 400 950 560 1110 75 150 75 50 98 129 200 20.0 16.73 26.44
PCDRA2L-80-3 3 88.9 400 950 570 1120 100 200 100 50 126 129 210 60.0 25.50 38.45
PCDRA2L-80-6 3 88.9 450 950 650 1150 125 250 125 50 154 139 240 120.0 50.52 72.60
PCDRA2L-100-03 4 114.3 400 1100 550 1250 75 150 75 62 85 147 200 6.0 10.14 17.56
PCDRA2L-100-06 4 114.3 400 1100 550 1250 75 150 75 62 87 147 200 12.0 10.86 18.27
PCDRA2L-100-1 4 114.3 400 1100 560 1260 75 150 75 62 99 155 220 20.0 17.41 29.78
PCDRA2L-100-3 4 114.3 450 1100 620 1270 110 220 110 62 131 155 240 60.0 29.59 46.43
PCDRA2L-100-6 4 114.3 450 1100 650 1300 125 250 125 62 155 165 270 120.0 52.34 81.04
PCDRA2L-125-03 5 141.3 400 1150 550 1300 75 150 75 62 85 172 220 6.0 10.56 18.50
PCDRA2L-125-06 5 141.3 400 1150 550 1300 75 150 75 62 87 172 220 12.0 11.38 19.33
PCDRA2L-125-1 5 141.3 450 1150 610 1310 75 150 75 62 102 180 250 20.0 20.08 32.44
PCDRA2L-125-3 5 141.3 450 1150 620 1320 110 220 110 62 131 180 260 60.0 30.87 49.01
PCDRA2L-125-6 5 141.3 500 1150 700 1350 125 250 125 62 161 190 290 120.0 59.66 88.36
PCDRA2L-150-03 6 168.3 450 1200 600 1350 90 180 90 91 94 201 250 6.0 13.90 23.44
PCDRA2L-150-06 6 168.3 450 1200 600 1350 75 150 75 91 88 201 250 12.0 12.51 20.46
PCDRA2L-150-1 6 168.3 450 1200 610 1360 75 150 75 91 102 209 280 20.0 21.00 34.25
PCDRA2L-150-3 6 168.3 500 1200 670 1370 125 250 125 91 138 209 290 60.0 36.26 56.87
PCDRA2L-150-6 6 168.3 500 1200 700 1400 135 270 135 91 165 219 320 120.0 64.94 98.32
PCDRA2L-150-10 6 168.3 550 1200 780 1430 150 300 150 91 186 229 330 200.0 98.02 143.95
PCDRA2L-150-16 6 168.3 650 1050 890 1290 160 320 160 91 250 239 360 320.0 157.83 195.51
PCDRA2L-200-03 8 219.1 500 1250 650 1400 90 180 90 91 94 252 300 6.0 15.59 25.13
PCDRA2L-200-06 8 219.1 500 1250 650 1400 75 150 75 91 90 252 300 12.0 15.27 23.22
PCDRA2L-200-1 8 219.1 500 1250 660 1410 75 150 75 91 102 260 330 20.0 23.53 36.78
PCDRA2L-200-3 8 219.1 550 1250 720 1420 125 250 125 91 141 260 340 60.0 42.06 62.67
PCDRA2L-200-6 8 219.1 550 1250 750 1450 135 270 135 91 166 270 370 120.0 71.76 105.15
O.D. Weight(kg)
Type NPS Lmin Lmax L1min L1max B H He dt E A1 A2 Permissible
(mm) Load(kN) at Lmin at Lmax
PCDRA2L-200-10 8 219.1 600 1250 830 1480 150 300 150 91 187 280 380 200.0 106.79 152.71
PCDRA2L-200-16 8 219.1 700 1150 940 1390 170 340 170 91 265 290 410 320.0 183.52 228.56
PCDRA2L-250-03 10 273.1 550 1400 700 1550 100 200 100 116 99 326 380 6.0 18.85 30.86
PCDRA2L-250-06 10 273.1 550 1400 700 1550 100 200 100 116 102 326 380 12.0 20.34 32.35
PCDRA2L-250-1 10 273.1 550 1400 710 1560 90 180 90 116 112 334 400 20.0 31.46 49.47
PCDRA2L-250-3 10 273.1 600 1400 770 1570 125 250 125 116 144 334 420 60.0 49.96 73.51
PCDRA2L-250-6 10 273.1 600 1400 800 1600 150 300 150 116 173 344 440 120.0 85.36 127.75
PCDRA2L-250-10 10 273.1 650 1400 880 1630 160 320 160 116 197 354 450 200.0 129.61 186.13
PCDRA2L-250-16 10 273.1 750 1200 990 1440 175 350 175 116 282 364 490 320.0 218.32 264.68
PCDRA2L-250-25 10 273.1 800 1200 1070 1470 225 450 225 116 339 364 490 500.0 326.20 379.19
PCDRA2L-300-03 12 323.9 600 1450 750 1600 130 260 130 170 113 376 430 6.0 24.12 39.73
PCDRA2L-300-06 12 323.9 600 1450 750 1600 130 260 130 170 115 376 430 12.0 25.82 41.44
PCDRA2L-300-1 12 323.9 600 1450 760 1610 130 260 130 170 129 384 450 20.0 42.29 68.31
PCDRA2L-300-3 12 323.9 650 1450 820 1620 150 300 150 170 155 384 470 60.0 60.02 88.28
PCDRA2L-300-6 12 323.9 650 1450 850 1650 160 320 160 170 183 394 490 120.0 102.31 147.53
PCDRA2L-300-10 12 323.9 700 1450 930 1680 175 350 175 170 204 404 500 200.0 146.93 208.75
PCDRA2L-300-16 12 323.9 800 1400 1040 1640 185 370 185 170 289 414 540 320.0 240.52 305.87
PCDRA2L-300-25 12 323.9 850 1400 1120 1670 225 450 225 170 342 414 540 500.0 347.83 420.69
PCDRA2L-350-1 14 355.6 650 1500 810 1660 130 260 130 170 130 416 480 20.0 45.02 71.05
PCDRA2L-350-3 14 355.6 650 1500 820 1670 150 300 150 170 156 416 500 60.0 62.02 92.05
PCDRA2L-350-6 14 355.6 700 1500 900 1700 160 320 160 170 183 426 530 120.0 108.40 153.62
PCDRA2L-350-10 14 355.6 750 1500 980 1730 175 350 175 170 204 436 540 200.0 154.92 216.74
PCDRA2L-350-16 14 355.6 850 1450 1090 1690 190 380 190 170 291 446 570 320.0 255.93 323.04
PCDRA2L-350-25 14 355.6 900 1450 1170 1720 240 480 240 170 349 446 570 500.0 375.53 453.24
PCDRA2L-400-1 16 406.4 700 1600 860 1760 130 260 130 170 130 467 540 20.0 48.48 76.03
PCDRA2L-400-3 16 406.4 700 1600 870 1770 150 300 150 170 159 467 550 60.0 70.05 101.85
PCDRA2L-400-6 16 406.4 750 1600 950 1800 160 320 160 170 184 477 580 120.0 116.47 164.51
PCDRA2L-400-10 16 406.4 850 1600 1110 1860 175 350 175 170 203 487 590 200.0 186.14 247.96
PCDRA2L-400-16 16 406.4 900 1550 1140 1790 200 400 200 170 296 497 620 320.0 279.22 355.76
PCDRA2L-400-25 16 406.4 950 1550 1220 1820 235 470 235 170 348 497 620 500.0 393.54 476.56
PCDRA2L-400-40 16 406.4 1050 1550 1360 1860 280 560 280 170 388 507 660 800.0 592.14 691.05
PCDRA2L-450-1 18 457.2 750 1700 910 1860 130 260 130 170 130 518 590 20.0 51.94 81.02
PCDRA2L-450-3 18 457.2 750 1700 920 1870 150 300 150 170 159 518 600 60.0 75.35 108.91
PCDRA2L-450-6 18 457.2 800 1700 1000 1900 175 350 175 170 191 528 630 120.0 130.42 186.06
PCDRA2L-450-10 18 457.2 900 1700 1160 1960 195 390 195 170 213 538 640 200.0 209.98 283.45
PCDRA2L-450-16 18 457.2 950 1700 1190 1940 200 400 200 170 298 548 670 320.0 295.33 383.65
PCDRA2L-450-25 18 457.2 1000 1700 1270 1970 250 500 250 170 356 548 670 500.0 428.11 531.15
PCDRA2L-450-40 18 457.2 1100 1700 1410 2010 285 570 285 170 392 558 710 800.0 628.68 749.49
PCDRA2L-500-1 20 508.0 800 1800 960 1960 170 340 170 221 151 568 640 20.0 68.61 108.64
PCDRA2L-500-3 20 508.0 800 1800 970 1970 170 340 170 221 168 568 650 60.0 85.72 125.75
PCDRA2L-500-6 20 508.0 850 1800 1050 2000 185 370 185 221 196 578 680 120.0 142.88 204.96
PCDRA2L-500-10 20 508.0 1000 1800 1310 2110 200 400 200 221 213 588 690 200.0 263.42 338.78
PCDRA2L-500-16 20 508.0 1000 1800 1240 2040 220 440 220 221 307 598 720 320.0 327.69 431.31
PCDRA2L-500-25 20 508.0 1050 1800 1320 2070 260 520 260 221 371 598 720 500.0 482.54 597.35
PCDRA2L-500-40 20 508.0 1150 1800 1460 2110 300 600 300 221 400 608 760 800.0 677.29 815.05
PCDRA2L-550-1 22 558.8 850 1900 1010 2060 170 340 170 221 152 619 690 20.0 72.81 114.85
PCDRA2L-550-3 22 558.8 850 1900 1020 2070 170 340 170 221 174 619 700 60.0 99.27 141.31
PCDRA2L-550-6 22 558.8 950 1900 1170 2120 185 370 185 221 195 629 730 120.0 168.18 230.26
PCDRA2L-550-10 22 558.8 1050 1900 1360 2210 200 400 200 221 214 639 740 200.0 278.15 358.22
PCDRA2L-550-16 22 558.8 1050 1900 1290 2140 225 450 225 221 310 649 770 320.0 348.63 461.23
PCDRA2L-550-25 22 558.8 1100 1900 1370 2170 275 550 275 221 378 649 770 500.0 520.79 650.32
PCDRA2L-550-40 22 558.8 1200 1900 1510 2210 300 600 300 221 401 659 810 800.0 708.88 857.25
PCDRA2L-600-1 24 609.6 900 2000 1060 2160 170 340 170 221 152 670 740 20.0 77.02 121.06
PCDRA2L-600-3 24 609.6 900 2000 1070 2170 170 340 170 221 174 670 750 60.0 105.45 149.48
PCDRA2L-600-6 24 609.6 1000 2000 1220 2220 185 370 185 221 196 680 780 120.0 177.64 242.99
PCDRA2L-600-10 24 609.6 1100 2000 1410 2310 200 400 200 221 215 690 790 200.0 292.88 377.66
PCDRA2L-600-16 24 609.6 1100 2000 1340 2240 225 450 225 221 311 700 820 320.0 365.48 484.70
PCDRA2L-600-25 24 609.6 1150 2000 1420 2270 275 550 275 221 379 700 820 500.0 545.81 683.43
PCDRA2L-600-40 24 609.6 1250 2000 1560 2310 315 630 315 221 419 710 860 800.0 791.26 958.17
PCDRA2L-600-60 24 609.6 1300 2000 1650 2350 325 650 325 221 475 730 900 1200.0 1141.31 1355.61
PCDRA2L-650-1 26 660.4 950 2100 1110 2260 210 420 210 275 171 721 790 20.0 92.88 149.75
PCDRA2L-650-3 26 660.4 1000 2100 1170 2270 210 420 210 275 193 721 810 60.0 125.83 180.23
PCDRA2L-650-6 26 660.4 1100 2100 1350 2350 225 450 225 275 213 731 830 120.0 234.54 314.03
PCDRA2L-650-10 26 660.4 1150 2100 1460 2410 250 500 250 275 237 741 840 200.0 345.53 457.39
PCDRA2L-650-16 26 660.4 1150 2050 1390 2290 250 500 250 275 332 751 880 320.0 424.47 556.94
PCDRA2L-650-25 26 660.4 1200 2050 1470 2320 290 580 290 275 401 751 880 500.0 629.02 774.15
PCDRA2L-650-40 26 660.4 1300 2050 1610 2360 325 650 325 275 423 761 910 800.0 838.50 1010.71
PCDRA2 L-650-60 26 660.4 1350 2050 1700 2400 350 700 350 275 486 781 950 1200.0 1232.49 1463.28
O.D. Weight(kg)
Type NPS Lmin Lmax L1min L1max B H He dt E A1 A2 Permissible
(mm) Load(kN) at Lmin at Lmax
PCDRA2L-700-1 28 711.2 1000 2300 1160 2460 210 420 210 275 172 772 840 20.0 97.55 161.85
PCDRA2L-700-3 28 711.2 1050 2300 1220 2470 210 420 210 275 194 772 860 60.0 132.47 194.29
PCDRA2L-700-6 28 711.2 1150 2300 1400 2550 225 450 225 275 214 782 880 120.0 246.15 337.55
PCDRA2L-700-10 28 711.2 1300 2300 1660 2660 250 500 250 275 236 792 890 200.0 417.31 535.06
PCDRA2L-700-16 28 711.2 1200 2100 1440 2340 250 500 250 275 332 802 930 320.0 443.33 575.80
PCDRA2L-700-25 28 711.2 1250 2100 1520 2370 300 600 300 275 406 802 930 500.0 667.46 817.59
PCDRA2L-700-40 28 711.2 1350 2100 1660 2410 325 650 325 275 424 812 960 800.0 873.22 1045.43
PCDRA2L-700-60 28 711.2 1400 2100 1750 2450 350 700 350 275 486 832 1000 1200.0 1279.52 1510.31
PCDRA2L-750-1 30 762.0 1050 2500 1210 2660 250 500 250 326 191 822 890 20.0 115.07 200.44
PCDRA2L-750-3 30 762.0 1100 2500 1270 2670 250 500 250 326 213 822 910 60.0 152.52 234.95
PCDRA2L-750-6 30 762.0 1200 2500 1450 2750 250 500 250 326 226 832 930 120.0 271.95 386.76
PCDRA2L-750-10 30 762.0 1350 2500 1710 2860 325 650 325 326 269 842 940 200.0 502.78 678.82
PCDRA2L-750-16 30 762.0 1250 2200 1490 2440 325 650 325 326 391 852 980 320.0 591.21 772.98
PCDRA2L-750-25 30 762.0 1300 2200 1570 2470 325 650 325 326 428 852 980 500.0 755.12 927.33
PCDRA2L-750-40 30 762.0 1400 2200 1710 2510 340 680 340 326 441 862 1010 800.0 967.18 1159.34
PCDRA2L-750-60 30 762.0 1450 2200 1800 2550 350 700 350 326 493 882 1050 1200.0 1349.21 1596.49
PCDRA2L-800-1 32 812.8 1100 2700 1260 2860 250 500 250 326 194 873 940 20.0 125.13 219.33
PCDRA2L-800-3 32 812.8 1150 2700 1320 2870 250 500 250 326 213 873 960 60.0 159.64 250.89
PCDRA2L-800-6 32 812.8 1300 2700 1580 2980 250 500 250 326 226 883 980 120.0 316.58 440.21
PCDRA2L-800-10 32 812.8 1400 2700 1760 3060 325 650 325 326 271 893 990 200.0 522.85 721.85
PCDRA2L-800-16 32 812.8 1300 2300 1540 2540 325 650 325 326 391 903 1030 320.0 615.46 806.81
PCDRA2L-800-25 32 812.8 1350 2300 1620 2570 325 650 325 326 428 903 1030 500.0 786.40 968.17
PCDRA2L-800-40 32 812.8 1450 2300 1760 2610 350 700 350 326 446 913 1060 800.0 1018.71 1228.90
PCDRA2L-800-60 32 812.8 1500 2300 1850 2650 360 720 360 326 498 933 1110 1200.0 1417.18 1688.47
PCDRA2L-850-1 34 863.6 1150 2800 1310 2960 250 500 250 326 194 924 990 20.0 130.56 227.70
PCDRA2L-850-3 34 863.6 1200 2800 1370 2970 250 500 250 326 214 924 1010 60.0 166.75 260.95
PCDRA2L-850-6 34 863.6 1350 2800 1630 3080 250 500 250 326 226 934 1030 120.0 330.06 458.11
PCDRA2L-850-10 34 863.6 1450 2800 1830 3180 325 650 325 326 270 944 1040 200.0 564.14 770.79
PCDRA2L-850-16 34 863.6 1350 2450 1590 2690 325 650 325 326 393 954 1080 320.0 639.72 850.20
PCDRA2L-850-25 34 863.6 1400 2450 1670 2720 325 650 325 326 430 954 1080 500.0 817.67 1018.58
PCDRA2L-850-40 34 863.6 1500 2300 1810 2610 345 690 345 326 444 964 1110 800.0 1049.33 1244.32
PCDRA2L-850-60 34 863.6 1550 2300 1900 2650 360 720 360 326 498 984 1160 1200.0 1465.95 1720.29
PCDRA2L-900-1 36 914.4 1200 2900 1360 3060 250 500 250 326 194 975 1040 20.0 135.98 236.07
PCDRA2L-900-3 36 914.4 1250 2900 1420 3070 250 500 250 326 214 975 1060 60.0 173.86 271.01
PCDRA2L-900-6 36 914.4 1400 2900 1680 3180 250 500 250 326 227 985 1090 120.0 343.54 476.01
PCDRA2L-900-10 36 914.4 1500 2900 1880 3280 325 650 325 326 271 995 1100 200.0 585.16 799.47
PCDRA2L-900-16 36 914.4 1550 2300 1790 2540 325 650 325 326 391 1005 1130 320.0 692.68 836.19
PCDRA2L-900-25 36 914.4 1450 2500 1720 2770 325 650 325 326 430 1005 1130 500.0 848.95 1049.86
PCDRA2L-900-40 36 914.4 1550 2300 1860 2610 350 700 350 326 446 1015 1160 800.0 1094.37 1279.83
PCDRA2L-900-60 36 914.4 1600 2300 1950 2650 360 720 360 326 508 1035 1210 1200.0 1567.70 1805.09
PCDRA2L-950-1 38 965.2 1250 2950 1410 3110 275 550 275 358 206 1026 1090 20.0 150.74 260.84
PCDRA2L-950-3 38 965.2 1300 2950 1490 3140 275 550 275 358 225 1026 1110 60.0 211.65 318.51
PCDRA2L-950-6 38 965.2 1450 2950 1750 3250 275 550 275 358 237 1036 1140 120.0 395.66 541.38
PCDRA2L-950-10 38 965.2 1600 2950 2010 3360 325 650 325 358 270 1046 1150 200.0 648.54 855.19
PCDRA2L-950-16 38 965.2 1450 2350 1840 2590 325 650 325 358 392 1056 1180 320.0 716.94 860.45
PCDRA2L-950-25 38 965.2 1500 2550 1770 2820 325 650 325 358 430 1056 1180 500.0 880.23 1081.14
PCDRA2L-950-40 38 965.2 1600 2300 1910 2660 350 700 350 358 447 1066 1210 800.0 1132.20 1317.66
PCDRA2L-950-60 38 965.2 1650 2500 2000 2700 375 750 375 358 515 1086 1260 1200.0 1650.76 1898.03
PCDRA2L-1000-1 40 1016.0 1300 3000 1460 3160 275 550 275 358 206 1076 1140 20.0 156.46 266.56
PCDRA2L-1000-3 40 1016.0 1350 3000 1540 3190 275 550 275 358 225 1076 1160 60.0 220.01 326.87
PCDRA2L-1000-6 40 1016.0 1500 3000 1800 3300 275 550 275 358 237 1086 1190 120.0 410.54 556.26
PCDRA2L-1000-10 40 1016.0 1650 3000 2060 3410 325 650 325 358 270 1096 1200 200.0 671.00 877.65
PCDRA2L-1000-16 40 1016.0 1500 2400 1890 2640 325 650 325 358 392 1106 1230 320.0 741.20 884.71
PCDRA2L-1000-25 40 1016.0 1550 2600 1820 2870 325 650 325 358 431 1106 1230 500.0 911.50 1112.41
PCDRA2L-1000-40 40 1016.0 1650 2400 1960 2710 360 720 360 358 452 1116 1260 800.0 1185.55 1376.31
PCDRA2L-1000-60 40 1016.0 1700 2400 2050 2750 375 750 375 358 515 1136 1310 1200.0 1702.79 1950.07
A2
A1
A1
A
L1
L1
L
L
d t
d t
H/2
He
H/2
He
E
E
H
H
B B
PCDRA2M-XXX-03,06,1,3,6,10 PCDRA2M-XXX-16,25,40,60
Dimension : mm
O.D. Weight(kg)
Type NPS Lmin Lmax L1min L1max B H He dt E A1 A2 Permissible
(mm) Load(kN) at Lmin at Lmax
PCDRA2M-25-03 1 33.4 300 700 450 850 50 100 50 20 71 66 120 6.0 5.78 8.61
PCDRA2M-25-06 1 33.4 300 700 450 850 75 150 75 20 82 66 120 12.0 7.74 11.98
PCDRA2M-25-1 1 33.4 350 700 510 860 75 150 75 20 96 74 140 20.0 14.35 20.53
PCDRA2M-40-03 1 1/2 48.3 300 700 450 850 50 100 50 30 71 81 130 6.0 5.99 8.82
PCDRA2M-40-06 1 1/2 48.3 300 700 450 850 75 150 75 30 82 81 130 12.0 7.99 12.23
PCDRA2M-40-1 1 1/2 48.3 350 700 510 860 75 150 75 30 96 89 160 20.0 14.75 20.93
PCDRA2M-40-3 1 1/2 48.3 350 700 520 870 125 250 125 30 130 99 180 60.0 33.80 49.25
PCDRA2M-50-03 2 60.3 350 700 500 850 60 120 60 35 75 93 150 6.0 7.27 10.24
PCDRA2M-50-06 2 60.3 350 700 500 850 75 150 75 35 82 93 150 12.0 8.72 12.43
PCDRA2M-50-1 2 60.3 350 700 510 860 75 150 75 35 96 101 170 20.0 15.08 21.26
PCDRA2M-50-3 2 60.3 400 700 570 870 125 250 125 35 130 105 190 60.0 30.87 41.47
PCDRA2M-65-03 2 1/2 73.0 350 750 500 900 60 120 60 44 77 105 160 6.0 7.77 11.16
PCDRA2M-65-06 2 1/2 73.0 350 750 500 900 75 150 75 44 83 105 160 12.0 8.93 13.17
PCDRA2M-65-1 2 1/2 73.0 350 750 510 910 75 150 75 44 97 113 180 20.0 15.42 22.48
PCDRA2M-65-3 2 1/2 73.0 400 750 570 920 125 250 125 44 131 113 200 60.0 27.66 37.96
PCDRA2M-80-03 3 88.9 350 950 500 1100 60 120 60 50 78 121 170 6.0 8.03 13.12
PCDRA2M-80-06 3 88.9 350 950 500 1100 85 170 85 50 91 121 170 12.0 10.58 17.78
PCDRA2M-80-1 3 88.9 400 950 560 1110 85 170 85 50 102 129 200 20.0 18.17 29.18
PCDRA2M-80-3 3 88.9 400 950 570 1120 145 290 145 50 144 129 210 60.0 32.40 51.19
PCDRA2M-80-6 3 88.9 450 950 650 1150 200 400 200 50 182 139 240 120.0 70.61 105.94
PCDRA2M-100-03 4 114.3 400 1100 550 1250 75 150 75 62 85 147 200 6.0 10.14 17.56
PCDRA2M-100-06 4 114.3 400 1100 550 1250 100 200 100 62 98 147 200 12.0 13.00 22.90
PCDRA2M-100-1 4 114.3 400 1100 560 1260 95 190 95 62 107 155 220 20.0 20.32 35.98
PCDRA2M-100-3 4 114.3 450 1100 620 1270 155 310 155 62 150 155 240 60.0 37.09 60.82
PCDRA2M-100-6 4 114.3 450 1100 650 1300 200 400 200 62 185 165 270 120.0 72.43 118.35
PCDRA2M-125-03 5 141.3 400 1150 550 1300 75 150 75 62 85 172 220 6.0 10.56 18.50
PCDRA2M-125-06 5 141.3 400 1150 550 1300 100 200 100 62 98 172 220 12.0 13.53 24.13
PCDRA2M-125-1 5 141.3 450 1150 610 1310 95 190 95 62 110 180 250 20.0 23.22 38.88
PCDRA2M-125-3 5 141.3 450 1150 620 1320 155 310 155 62 150 180 260 60.0 38.38 63.93
PCDRA2M-125-6 5 141.3 500 1150 700 1350 200 400 200 62 191 190 290 120.0 81.08 127.00
PCDRA2M-150-03 6 168.3 450 1200 600 1350 90 180 90 91 94 201 250 6.0 13.90 23.44
PCDRA2M-150-06 6 168.3 450 1200 600 1350 100 200 100 91 98 201 250 12.0 14.84 25.43
PCDRA2M-150-1 6 168.3 450 1200 610 1360 100 200 100 91 113 209 280 20.0 24.94 42.60
PCDRA2M-150-3 6 168.3 500 1200 670 1370 165 330 165 91 155 209 290 60.0 43.48 70.69
PCDRA2M-150-6 6 168.3 500 1200 700 1400 200 400 200 91 192 219 320 120.0 83.58 133.03
PCDRA2M-150-10 6 168.3 550 1200 780 1430 210 420 210 91 210 229 350 200.0 125.02 189.31
PCDRA2M-150-16 6 168.3 650 1050 890 1290 225 450 225 91 274 239 390 320.0 198.93 251.92
PCDRA2M-200-03 8 219.1 500 1250 650 1400 90 180 90 91 94 252 300 6.0 15.59 25.13
PCDRA2M-200-06 8 219.1 500 1250 650 1400 100 200 100 91 101 252 300 12.0 17.77 28.37
PCDRA2M-200-1 8 219.1 500 1250 660 1410 100 200 100 91 113 260 330 20.0 27.76 45.42
PCDRA2M-200-3 8 219.1 550 1250 720 1420 165 330 165 91 158 260 340 60.0 49.75 76.95
PCDRA2M-200-6 8 219.1 550 1250 750 1450 200 400 200 91 192 270 370 120.0 91.55 141.00
O.D. Weight(kg)
Type NPS Lmin Lmax L1min L1max B H He dt E A1 A2 Permissible
(mm) Load(kN) at Lmin at Lmax
PCDRA2M-200-10 8 219.1 600 1250 830 1480 210 420 210 91 210 280 400 200.0 135.40 199.70
PCDRA2M-200-16 8 219.1 700 1150 940 1390 235 470 235 91 290 290 440 320.0 227.04 289.30
PCDRA2M-250-03 10 273.1 550 1400 700 1550 100 200 100 116 99 326 380 6.0 18.85 30.86
PCDRA2M-250-06 10 273.1 550 1400 700 1550 110 220 110 116 106 326 380 12.0 21.42 34.64
PCDRA2M-250-1 10 273.1 550 1400 710 1560 110 220 110 116 120 334 400 20.0 35.11 57.13
PCDRA2M-250-3 10 273.1 600 1400 770 1570 175 350 175 116 166 334 420 60.0 60.21 93.18
PCDRA2M-250-6 10 273.1 600 1400 800 1600 200 400 200 116 194 344 440 120.0 101.55 158.07
PCDRA2M-250-10 10 273.1 650 1400 880 1630 225 450 225 116 224 354 480 200.0 162.54 242.03
PCDRA2M-250-16 10 273.1 750 1200 990 1440 235 470 235 116 306 364 510 320.0 260.86 323.12
PCDRA2M-250-25 10 273.1 850 1200 1120 1470 275 550 275 116 357 374 550 500.0 419.19 487.19
PCDRA2M-300-03 12 323.9 600 1450 750 1600 130 260 130 170 113 376 430 6.0 24.12 39.73
PCDRA2M-300-06 12 323.9 600 1450 750 1600 130 260 130 170 115 376 430 12.0 25.82 41.44
PCDRA2M-300-1 12 323.9 600 1450 760 1610 130 260 130 170 129 384 450 20.0 42.29 68.31
PCDRA2M-300-3 12 323.9 650 1450 820 1620 185 370 185 170 171 384 470 60.0 67.70 102.55
PCDRA2M-300-6 12 323.9 650 1450 850 1650 210 420 210 170 204 394 490 120.0 119.50 178.85
PCDRA2M-300-10 12 323.9 700 1450 930 1680 235 470 235 170 228 404 530 200.0 179.34 262.36
PCDRA2M-300-16 12 323.9 800 1300 1040 1540 250 500 250 170 313 414 560 320.0 288.86 362.46
PCDRA2M-300-25 12 323.9 900 1300 1170 1570 285 570 285 170 363 424 600 500.0 454.04 534.58
PCDRA2M-350-1 14 355.6 650 1500 810 1660 130 260 130 170 130 416 480 20.0 45.02 71.05
PCDRA2M-350-3 14 355.6 650 1500 820 1670 195 390 195 170 175 416 500 60.0 71.93 110.96
PCDRA2M-350-6 14 355.6 700 1500 900 1700 225 450 225 170 211 426 530 120.0 132.02 195.60
PCDRA2M-350-10 14 355.6 750 1500 980 1730 235 470 235 170 229 436 560 200.0 188.87 271.88
PCDRA2M-350-16 14 355.6 850 1450 1090 1690 265 530 265 170 322 446 590 320.0 313.90 407.51
PCDRA2M-350-25 14 355.6 900 1450 1170 1720 300 600 300 170 372 456 630 500.0 478.21 594.78
PCDRA2M-400-1 16 406.4 700 1600 860 1760 130 260 130 170 130 467 540 20.0 48.48 76.03
PCDRA2M-400-3 16 406.4 700 1600 870 1770 195 390 195 170 178 467 550 60.0 80.49 121.82
PCDRA2M-400-6 16 406.4 750 1600 950 1800 225 450 225 170 212 477 580 120.0 141.23 208.78
PCDRA2M-400-10 16 406.4 850 1600 1110 1860 245 490 245 170 232 487 610 200.0 229.95 316.49
PCDRA2M-400-16 16 406.4 900 1550 1140 1790 275 550 275 170 327 497 650 320.0 339.94 445.18
PCDRA2M-400-25 16 406.4 950 1550 1220 1820 310 620 310 170 378 507 680 500.0 514.41 645.82
PCDRA2M-400-40 16 406.4 1050 1550 1360 1860 375 750 375 170 424 517 710 800.0 777.35 931.90
PCDRA2M-450-1 18 457.2 750 1700 910 1860 130 260 130 170 130 518 590 20.0 51.94 81.02
PCDRA2M-450-3 18 457.2 750 1700 920 1870 200 400 200 170 181 518 600 60.0 87.56 132.30
PCDRA2M-450-6 18 457.2 800 1700 1000 1900 225 450 225 170 213 528 630 120.0 150.44 221.97
PCDRA2M-450-10 18 457.2 900 1700 1160 1960 250 500 250 170 235 538 660 200.0 246.67 340.87
PCDRA2M-450-16 18 457.2 950 1700 1190 1940 285 570 285 170 333 548 700 320.0 366.62 492.46
PCDRA2M-450-25 18 457.2 1000 1700 1270 1970 325 650 325 170 386 558 730 500.0 556.62 717.35
PCDRA2M-450-40 18 457.2 1100 1700 1410 2010 375 750 375 170 427 568 760 800.0 814.44 999.90
PCDRA2M-500-1 20 508.0 800 1800 960 1960 170 340 170 221 151 568 640 20.0 68.61 108.64
PCDRA2M-500-3 20 508.0 800 1800 970 1970 210 420 210 221 186 568 650 60.0 96.05 145.50
PCDRA2M-500-6 20 508.0 850 1800 1050 2000 245 490 245 221 222 578 680 120.0 168.17 250.39
PCDRA2M-500-10 20 508.0 1000 1800 1310 2110 260 520 260 221 238 588 710 200.0 307.77 405.74
PCDRA2M-500-16 20 508.0 1000 1800 1240 2040 300 600 300 221 341 598 750 320.0 398.15 539.45
PCDRA2M-500-25 20 508.0 1050 1800 1320 2070 335 670 335 221 402 608 780 500.0 618.19 795.70
PCDRA2M-500-40 20 508.0 1150 1800 1460 2110 390 780 390 221 435 618 810 800.0 872.73 1081.68
PCDRA2M-550-1 22 558.8 850 1900 1010 2060 170 340 170 221 152 619 690 20.0 72.81 114.85
PCDRA2M-550-3 22 558.8 850 1900 1020 2070 185 370 185 221 181 629 710 60.0 127.68 196.30
PCDRA2M-550-6 22 558.8 950 1900 1170 2120 245 490 245 221 222 629 730 120.0 196.02 278.24
PCDRA2M-550-10 22 558.8 1050 1900 1360 2210 260 520 260 221 239 649 770 200.0 370.42 500.53
PCDRA2M-550-16 22 558.8 1050 1900 1290 2140 300 600 300 221 342 649 800 320.0 417.46 567.59
PCDRA2M-550-25 22 558.8 1100 1900 1370 2170 350 700 350 221 410 659 830 500.0 664.43 862.25
PCDRA2M-550-40 22 558.8 1200 1900 1510 2210 410 820 410 221 445 669 870 800.0 939.72 1176.28
PCDRA2M-600-1 24 609.6 900 2000 1060 2160 170 340 170 221 152 670 740 20.0 77.02 121.06
PCDRA2M-600-3 24 609.6 900 2000 1070 2170 200 400 200 221 188 680 760 60.0 141.47 219.18
PCDRA2M-600-6 24 609.6 1000 2000 1220 2220 260 520 260 221 229 680 780 120.0 213.89 305.74
PCDRA2M-600-10 24 609.6 1100 2000 1410 2310 260 520 260 221 240 700 820 200.0 388.30 526.07
PCDRA2M-600-16 24 609.6 1100 1950 1340 2190 310 620 310 221 347 700 850 320.0 445.85 600.98
PCDRA2M-600-25 24 609.6 1150 1950 1420 2220 350 700 350 221 410 710 880 500.0 694.26 892.08
PCDRA2M-600-40 24 609.6 1250 1950 1560 2260 410 820 410 221 456 720 920 800.0 1010.77 1247.33
PCDRA2M-600-60 24 609.6 1350 1950 1700 2300 460 920 460 221 527 730 990 1200.0 1436.34 1696.33
PCDRA2M-650-1 26 660.4 950 2050 1110 2210 210 420 210 275 171 721 790 20.0 92.88 147.28
PCDRA2M-650-3 26 660.4 1000 2050 1170 2220 210 420 210 275 193 731 820 60.0 157.32 235.21
PCDRA2M-650-6 26 660.4 1100 2050 1350 2300 260 520 260 275 228 731 830 120.0 253.23 340.49
PCDRA2M-650-10 26 660.4 1150 2050 1460 2360 285 570 285 275 251 741 870 200.0 376.14 496.95
PCDRA2M-650-16 26 660.4 1150 2000 1390 2240 325 650 325 275 364 751 900 320.0 498.94 661.58
PCDRA2M-650-25 26 660.4 1200 2000 1470 2270 375 750 375 275 436 761 930 500.0 798.43 1010.38
O.D. Weight(kg)
Type NPS Lmin Lmax L1min L1max B H He dt E A1 A2 Permissible
(mm) Load(kN) at Lmin at Lmax
PCDRA2M-650-40 26 660.4 1300 2000 1610 2310 410 820 410 275 457 771 970 800.0 1051.53 1288.09
PCDRA2M-650-60 26 660.4 1400 2000 1750 2350 475 950 475 275 534 781 1040 1200.0 1519.14 1787.61
PCDRA2M-700-1 28 711.2 1000 2100 1160 2260 210 420 210 275 171 772 840 20.0 97.55 151.95
PCDRA2M-700-3 28 711.2 1050 2100 1220 2270 210 420 210 275 193 782 870 60.0 165.19 243.09
PCDRA2M-700-6 28 711.2 1150 2100 1400 2350 265 530 265 275 230 782 880 120.0 268.24 357.17
PCDRA2M-700-10 28 711.2 1300 2100 1660 2460 290 580 290 275 250 792 920 200.0 455.78 565.06
PCDRA2M-700-16 28 711.2 1200 2050 1440 2290 325 650 325 275 364 802 950 320.0 520.26 682.90
PCDRA2M-700-25 28 711.2 1250 2050 1520 2320 375 750 375 275 437 812 980 500.0 832.01 1043.96
PCDRA2M-700-40 28 711.2 1350 2050 1660 2360 425 850 425 275 464 822 1020 800.0 1116.26 1361.47
PCDRA2M-700-60 28 711.2 1450 2050 1800 2400 475 950 475 275 535 832 1090 1200.0 1573.52 1841.99
PCDRA2M-750-1 30 762.0 1050 2300 1210 2460 250 500 250 326 190 822 890 20.0 115.07 188.67
PCDRA2M-750-3 30 762.0 1100 2300 1270 2470 250 500 250 326 212 832 920 60.0 193.18 299.16
PCDRA2M-750-6 30 762.0 1200 2300 1450 2550 265 530 265 326 232 842 940 120.0 330.05 467.35
PCDRA2M-750-10 30 762.0 1350 2300 1710 2660 325 650 325 326 267 842 970 200.0 506.80 652.22
PCDRA2M-750-16 30 762.0 1250 2100 1490 2340 350 700 350 326 400 852 1000 320.0 621.58 796.73
PCDRA2M-750-25 30 762.0 1300 2100 1570 2370 375 750 375 326 448 862 1030 500.0 898.83 1110.78
PCDRA2M-750-40 30 762.0 1400 2100 1710 2410 425 850 425 326 475 872 1070 800.0 1196.85 1442.06
PCDRA2M-750-60 30 762.0 1500 2100 1850 2450 485 970 485 326 545 882 1140 1200.0 1671.00 1945.12
PCDRA2M-800-1 32 812.8 1100 2450 1260 2610 250 500 250 326 193 873 940 20.0 125.13 204.61
PCDRA2M-800-3 32 812.8 1150 2450 1320 2620 250 500 250 326 213 883 970 60.0 201.77 316.57
PCDRA2M-800-6 32 812.8 1300 2450 1580 2730 265 530 265 326 231 893 990 120.0 379.70 523.24
PCDRA2M-800-10 32 812.8 1400 2450 1760 2810 325 650 325 326 268 893 1020 200.0 527.07 687.80
PCDRA2M-800-16 32 812.8 1300 2200 1540 2440 350 700 350 326 401 903 1050 320.0 646.82 832.28
PCDRA2M-800-25 32 812.8 1350 2200 1620 2470 375 750 375 326 449 913 1090 500.0 934.33 1159.52
PCDRA2M-800-40 32 812.8 1450 2200 1760 2510 450 900 450 326 487 923 1120 800.0 1282.74 1560.92
PCDRA2M-800-60 32 812.8 1550 2200 1900 2550 500 1000 500 326 553 933 1190 1200.0 1758.61 2064.76
PCDRA2M-850-1 34 863.6 1150 2600 1310 2760 250 500 250 326 194 924 990 20.0 130.56 215.92
PCDRA2M-850-3 34 863.6 1200 2600 1370 2770 250 500 250 326 213 934 1020 60.0 210.35 333.99
PCDRA2M-850-6 34 863.6 1350 2600 1630 2880 275 550 275 326 236 944 1040 120.0 403.53 565.44
PCDRA2M-850-10 34 863.6 1450 2600 1830 2980 325 650 325 326 269 944 1070 200.0 568.56 744.59
PCDRA2M-850-16 34 863.6 1350 2250 1590 2490 350 700 350 326 402 954 1100 320.0 672.06 857.52
PCDRA2M-850-25 34 863.6 1400 2250 1670 2520 400 800 400 326 460 964 1140 500.0 1003.88 1244.09
PCDRA2M-850-40 34 863.6 1500 2250 1810 2560 450 900 450 326 487 974 1170 800.0 1327.38 1605.57
PCDRA2M-850-60 34 863.6 1600 2250 1950 2600 500 1000 500 326 554 984 1240 1200.0 1815.44 2121.59
PCDRA2M-900-1 36 914.4 1200 2650 1360 2810 250 500 250 326 194 975 1040 20.0 135.98 221.35
PCDRA2M-900-3 36 914.4 1250 2650 1420 2820 250 500 250 326 213 985 1070 60.0 218.94 342.58
PCDRA2M-900-6 36 914.4 1400 2650 1680 2930 275 550 275 326 236 995 1100 120.0 419.07 580.98
PCDRA2M-900-10 36 914.4 1500 2650 1880 3030 325 650 325 326 269 995 1120 200.0 589.78 765.82
PCDRA2M-900-16 36 914.4 1400 2300 1640 2540 350 700 350 326 402 1005 1150 320.0 697.30 882.76
PCDRA2M-900-25 36 914.4 1450 2300 1720 2570 400 800 400 326 461 1015 1190 500.0 1040.26 1280.47
PCDRA2M-900-40 36 914.4 1550 2300 1860 2610 450 900 450 326 488 1025 1220 800.0 1372.03 1650.21
PCDRA2M-900-60 36 914.4 1650 2300 2000 2650 500 1000 500 326 565 1035 1300 1200.0 1925.25 2231.40
PCDRA2M-950-1 38 965.2 1250 2700 1410 2860 275 550 275 359 205 1026 1090 20.0 150.74 244.65
PCDRA2M-950-3 38 965.2 1300 2700 1490 2890 275 550 275 359 224 1036 1120 60.0 263.87 399.87
PCDRA2M-950-6 38 965.2 1450 2700 1750 3000 325 650 325 359 258 1046 1150 120.0 503.19 694.54
PCDRA2M-950-10 38 965.2 1600 2700 2010 3110 350 700 350 359 279 1046 1170 200.0 679.68 861.01
PCDRA2M-950-16 38 965.2 1450 2400 1690 2640 375 750 375 358 414 1056 1200 320.0 750.98 960.72
PCDRA2M-950-25 38 965.2 1500 2400 1770 2670 425 850 425 358 472 1066 1240 500.0 1112.77 1383.00
PCDRA2M-950-40 38 965.2 1600 2400 1910 2710 475 950 475 358 500 1076 1270 800.0 1462.38 1775.60
PCDRA2M-950-60 38 965.2 1700 2400 2050 2750 575 1150 575 358 597 1086 1350 1200.0 2154.78 2533.93
PCDRA2M-1000-1 40 1016.0 1300 2800 1460 2960 275 550 275 359 206 1076 1140 20.0 156.46 253.61
PCDRA2M-1000-3 40 1016.0 1350 2800 1540 2990 275 550 275 359 224 1086 1170 60.0 273.86 414.71
PCDRA2M-1000-6 40 1016.0 1500 2800 1800 3100 325 650 325 359 258 1096 1200 120.0 520.87 719.87
PCDRA2M-1000-10 40 1016.0 1650 2800 2060 3210 350 700 350 359 279 1096 1220 200.0 702.93 892.51
PCDRA2M-1000-16 40 1016.0 1500 2500 1740 2740 375 750 375 358 415 1106 1250 320.0 776.96 997.74
PCDRA2M-1000-25 40 1016.0 1600 2500 1870 2770 425 850 425 358 474 1116 1290 500.0 1165.04 1435.28
PCDRA2M-1000-40 40 1016.0 1650 2500 1960 2810 475 950 475 358 501 1126 1320 800.0 1508.06 1840.85
PCDRA2M-1000-60 40 1016.0 1750 2500 2100 2850 575 1150 575 358 599 1136 1400 1200.0 2217.70 2623.93
A2
A1
A1
A
L1
L1
L
L
d t
d t
H/2
He
H/2
He
E
E
H
H
B B
PCDRAH-XXX-03,06,1,3,6,10 PCDRAH-XXX-16,25,40,60
Dimension : mm
O.D. Weight(kg)
Type NPS Lmin Lmax L1min L1max B H He dt E A1 A2 Permissible
(mm) Load(kN) at Lmin at Lmax
PCDRA2H-25-03 1 33.4 300 700 450 850 75 150 75 20 81 66 120 6.0 7.52 12.00
PCDRA2H-25-06 1 33.4 300 700 450 850 75 150 75 20 82 74 130 12.0 11.23 18.30
PCDRA2H-25-1 1 33.4 350 700 510 860 75 150 75 20 96 84 150 20.0 19.35 28.62
PCDRA2H-40-03 1 1/2 48.3 300 700 450 850 75 150 75 30 81 81 130 6.0 7.73 11.97
PCDRA2H-40-06 1 1/2 48.3 300 700 450 850 75 150 75 30 82 89 140 12.0 11.48 18.54
PCDRA2H-40-1 1 1/2 48.3 350 700 510 860 75 150 75 30 96 99 170 20.0 19.75 29.02
PCDRA2H-40-3 1 1/2 48.3 350 700 520 870 125 250 125 30 130 119 200 60.0 51.22 76.98
PCDRA2H-50-03 2 60.3 350 700 500 850 75 150 75 35 81 93 150 6.0 8.43 12.13
PCDRA2H-50-06 2 60.3 350 700 500 850 75 150 75 35 82 101 150 12.0 12.56 18.74
PCDRA2H-50-1 2 60.3 350 700 510 860 75 150 75 35 96 111 180 20.0 20.07 29.34
PCDRA2H-50-3 2 60.3 400 700 570 870 125 250 125 35 130 117 200 60.0 42.21 58.10
PCDRA2H-65-03 2 1/2 73.0 350 750 500 900 75 150 75 44 83 105 160 6.0 8.93 13.17
PCDRA2H-65-06 2 1/2 73.0 350 750 500 900 75 150 75 44 85 113 170 12.0 13.34 20.41
PCDRA2H-65-1 2 1/2 73.0 350 750 510 910 85 170 85 44 101 123 190 20.0 22.40 34.41
PCDRA2H-65-3 2 1/2 73.0 400 750 570 920 125 250 125 44 131 129 210 60.0 42.77 61.32
PCDRA2H-80-03 3 88.9 350 850 500 1000 75 150 75 50 83 121 170 6.0 9.19 14.49
PCDRA2H-80-06 3 88.9 350 850 500 1000 85 170 85 50 90 129 180 12.0 14.98 24.98
PCDRA2H-80-1 3 88.9 400 850 560 1010 90 180 90 50 104 139 210 20.0 25.42 39.73
PCDRA2H-80-3 3 88.9 400 850 570 1020 135 270 135 50 139 145 230 60.0 47.30 73.05
PCDRA2H-80-6 3 88.9 450 850 650 1050 200 400 200 50 180 159 260 120.0 105.80 152.90
PCDRA2H-100-03 4 114.3 400 950 550 1100 85 170 85 62 88 147 200 6.0 10.99 17.60
PCDRA2H-100-06 4 114.3 400 950 550 1100 100 200 100 62 97 155 210 12.0 18.67 31.62
PCDRA2H-100-1 4 114.3 400 950 560 1110 90 180 90 62 104 165 230 20.0 26.11 43.59
PCDRA2H-100-3 4 114.3 450 950 620 1120 140 280 140 62 142 171 260 60.0 52.95 82.62
PCDRA2H-100-6 4 114.3 450 950 650 1150 200 400 200 62 182 185 290 120.0 107.62 166.50
PCDRA2H-125-03 5 141.3 400 1000 550 1150 85 170 85 62 89 172 220 6.0 11.41 18.62
PCDRA2H-125-06 5 141.3 400 1000 550 1150 100 200 100 62 97 180 230 12.0 19.19 33.32
PCDRA2H-125-1 5 141.3 450 1000 610 1160 90 180 90 62 107 190 260 20.0 29.53 47.02
PCDRA2H-125-3 5 141.3 450 1000 620 1170 145 290 145 62 144 196 280 60.0 55.75 89.56
PCDRA2H-125-6 5 141.3 500 1000 700 1200 200 400 200 62 188 210 310 120.0 118.94 177.81
PCDRA2H-150-03 6 168.3 450 1050 600 1200 90 180 90 91 93 201 250 6.0 13.90 21.53
PCDRA2H-150-06 6 168.3 450 1050 600 1200 100 200 100 91 98 209 260 12.0 20.97 35.10
PCDRA2H-150-1 6 168.3 450 1050 610 1210 100 200 100 91 112 219 290 20.0 32.84 54.03
PCDRA2H-150-3 6 168.3 500 1050 670 1220 150 300 150 91 147 225 310 60.0 61.91 96.88
PCDRA2H-150-6 6 168.3 500 1050 700 1250 200 400 200 91 189 239 340 120.0 121.43 186.20
PCDRA2H-150-10 6 168.3 550 1050 780 1280 210 420 210 91 207 249 370 200.0 169.20 243.38
PCDRA2H-150-16 6 168.3 650 1050 890 1290 300 600 300 91 300 269 420 320.0 355.17 468.21
PCDRA2H-200-03 8 219.1 500 1150 650 1300 90 180 90 91 94 252 300 6.0 15.59 23.86
PCDRA2H-200-06 8 219.1 500 1150 650 1300 100 200 100 91 101 260 310 12.0 24.41 39.72
PCDRA2H-200-1 8 219.1 500 1150 660 1310 100 200 100 91 112 270 340 20.0 36.25 59.21
PCDRA2H-200-3 8 219.1 550 1150 720 1320 160 320 160 91 155 276 360 60.0 73.00 113.70
PCDRA2H-200-6 8 219.1 550 1150 750 1350 200 400 200 91 191 290 390 120.0 131.76 202.41
PCDRA2H-200-10 8 219.1 600 1150 830 1380 215 430 215 91 216 300 420 200.0 191.50 275.04
PCDRA2H-200-16 8 219.1 700 1150 940 1390 300 600 300 91 313 320 470 320.0 385.10 512.27
O.D. Weight(kg)
Type NPS Lmin Lmax L1min L1max B H He dt E A1 A2 Permissible
(mm) Load(kN) at Lmin at Lmax
PCDRA2H-250-03 10 273.1 550 1350 700 1500 110 220 110 116 104 326 380 6.0 19.93 32.37
PCDRA2H-250-06 10 273.1 550 1100 700 1250 110 220 110 116 105 334 390 12.0 29.26 43.51
PCDRA2H-250-1 10 273.1 550 1000 710 1160 110 220 110 116 118 344 410 20.0 45.16 62.65
PCDRA2H-250-3 10 273.1 600 1050 770 1220 160 320 160 116 156 350 430 60.0 82.92 113.45
PCDRA2H-250-6 10 273.1 600 1350 800 1550 210 420 210 116 198 364 460 120.0 149.63 242.36
PCDRA2H-250-10 10 273.1 650 1250 880 1480 235 470 235 116 225 374 500 200.0 222.97 322.58
PCDRA2H-250-16 10 273.1 750 1200 990 1440 300 600 300 116 330 374 520 320.0 346.14 441.51
PCDRA2H-250-25 10 273.1 850 1200 1120 1470 325 650 325 116 375 404 580 500.0 616.02 736.57
PCDRA2H-300-03 12 323.9 600 1450 750 1600 130 260 130 170 113 376 430 6.0 24.12 39.73
PCDRA2H-300-06 12 323.9 600 1450 750 1600 130 260 130 170 115 384 440 12.0 35.74 61.76
PCDRA2H-300-1 12 323.9 600 1450 760 1610 130 260 130 170 129 394 460 20.0 54.97 94.00
PCDRA2H-300-3 12 323.9 650 1450 820 1620 185 370 185 170 171 400 480 60.0 99.44 162.17
PCDRA2H-300-6 12 323.9 650 1450 850 1650 210 420 210 170 204 414 510 120.0 167.06 265.97
PCDRA2H-300-10 12 323.9 700 1450 930 1680 245 490 245 170 232 424 550 200.0 245.36 375.18
PCDRA2H-300-16 12 323.9 800 1300 1040 1540 300 600 300 170 332 424 570 320.0 367.21 473.18
PCDRA2H-300-25 12 323.9 900 1300 1170 1570 335 670 335 170 381 434 610 500.0 556.29 666.74
PCDRA2H-350-1 14 355.6 650 1500 810 1660 130 260 130 170 130 426 490 20.0 58.47 97.50
PCDRA2H-350-3 14 355.6 650 1500 820 1670 185 370 185 170 171 432 520 60.0 101.44 168.10
PCDRA2H-350-6 14 355.6 700 1500 900 1700 215 430 215 170 207 446 550 120.0 179.58 280.84
PCDRA2H-350-10 14 355.6 750 1500 980 1730 250 500 250 170 235 456 580 200.0 262.06 394.52
PCDRA2H-350-16 14 355.6 850 1400 1090 1640 325 650 325 170 344 456 600 320.0 407.27 533.56
PCDRA2H-350-25 14 355.6 900 1400 1170 1670 350 700 350 170 390 466 640 500.0 583.28 727.52
PCDRA2H-400-1 16 406.4 700 1600 860 1760 145 290 145 170 137 477 550 20.0 67.73 113.83
PCDRA2H-400-3 16 406.4 700 1600 870 1770 195 390 195 170 178 483 570 60.0 115.95 190.35
PCDRA2H-400-6 16 406.4 750 1600 950 1800 225 450 225 170 212 497 600 120.0 197.60 310.20
PCDRA2H-400-10 16 406.4 850 1600 1110 1860 260 520 260 170 238 507 630 200.0 315.33 453.10
PCDRA2H-400-16 16 406.4 900 1450 1140 1690 325 650 325 170 345 507 660 320.0 429.22 555.51
PCDRA2H-400-25 16 406.4 950 1450 1220 1720 375 750 375 170 400 517 690 500.0 643.38 797.92
PCDRA2H-400-40 16 406.4 1050 1450 1360 1760 425 850 425 170 439 547 740 800.0 1082.61 1282.79
PCDRA2H-450-1 18 457.2 750 1700 910 1860 135 270 135 170 133 528 600 20.0 68.67 113.98
PCDRA2H-450-3 18 457.2 750 1700 920 1870 195 390 195 170 179 534 620 60.0 123.62 202.15
PCDRA2H-450-6 18 457.2 800 1700 1000 1900 225 450 225 170 213 548 650 120.0 209.46 328.68
PCDRA2H-450-10 18 457.2 900 1700 1160 1960 265 530 265 170 242 558 680 200.0 337.06 486.84
PCDRA2H-450-16 18 457.2 950 1650 1190 1890 325 650 325 170 349 558 710 320.0 451.18 611.91
PCDRA2H-450-25 18 457.2 1000 1650 1270 1920 375 750 375 170 405 568 740 500.0 674.38 875.29
PCDRA2H-450-40 18 457.2 1100 1650 1410 1960 425 850 425 170 445 598 790 800.0 1129.27 1404.51
PCDRA2H-500-1 20 508.0 800 1800 960 1960 170 340 170 221 151 578 650 20.0 89.39 149.45
PCDRA2H-500-3 20 508.0 800 1800 970 1970 185 370 185 221 175 588 670 60.0 135.90 223.04
PCDRA2H-500-6 20 508.0 850 1800 1050 2000 240 480 240 221 220 598 700 120.0 231.96 366.20
PCDRA2H-500-10 20 508.0 1000 1800 1310 2110 265 530 265 221 240 618 740 200.0 448.20 622.95
PCDRA2H-500-16 20 508.0 1000 1750 1240 1990 350 700 350 221 361 608 760 320.0 499.01 684.46
PCDRA2H-500-25 20 508.0 1050 1750 1320 2020 390 780 390 221 423 618 790 500.0 748.90 973.92
PCDRA2H-500-40 20 508.0 1150 1750 1460 2060 465 930 465 221 463 628 820 800.0 1073.29 1336.11
PCDRA2H-550-1 22 558.8 850 1900 1010 2060 170 340 170 221 152 629 700 20.0 94.60 157.66
PCDRA2H-550-3 22 558.8 850 1900 1020 2070 210 420 210 221 192 639 720 60.0 165.62 269.48
PCDRA2H-550-6 22 558.8 950 1900 1170 2120 260 520 260 221 228 649 750 120.0 282.49 427.91
PCDRA2H-550-10 22 558.8 1050 1900 1360 2210 265 530 265 221 241 669 790 200.0 469.35 655.01
PCDRA2H-550-16 22 558.8 1050 1850 1290 2090 350 700 350 221 362 659 810 320.0 521.84 719.66
PCDRA2H-550-25 22 558.8 1100 1850 1370 2120 400 800 400 221 429 669 840 500.0 795.90 1043.18
PCDRA2H-550-40 22 558.8 1200 1850 1510 2160 475 950 475 221 469 679 880 800.0 1134.00 1424.84
PCDRA2H-600-1 24 609.6 900 2000 1060 2160 170 340 170 221 152 680 750 20.0 99.81 165.87
PCDRA2H-600-3 24 609.6 900 2000 1070 2170 210 420 210 221 192 690 770 60.0 174.74 283.54
PCDRA2H-600-6 24 609.6 1000 2000 1220 2220 260 520 260 221 229 700 800 120.0 296.34 449.41
PCDRA2H-600-10 24 609.6 1100 2000 1410 2310 275 550 275 221 246 720 840 200.0 503.60 707.60
PCDRA2H-600-16 24 609.6 1100 1950 1340 2190 375 750 375 221 374 710 860 320.0 572.61 797.81
PCDRA2H-600-25 24 609.6 1150 1950 1420 2220 425 850 425 221 441 720 890 500.0 864.78 1145.02
PCDRA2H-600-40 24 609.6 1250 1950 1560 2260 485 970 485 221 486 730 930 800.0 1228.67 1548.47
PCDRA2H-600-60 24 609.6 1350 1950 1700 2300 500 1000 500 221 542 770 1030 1200.0 1977.25 2401.15
PCDRA2H-650-1 26 660.4 950 2050 1110 2210 210 420 210 275 171 731 800 20.0 122.49 204.09
PCDRA2H-650-3 26 660.4 1000 2050 1170 2220 220 440 220 275 197 741 830 60.0 194.98 303.79
PCDRA2H-650-6 26 660.4 1100 2050 1350 2300 275 550 275 275 234 751 850 120.0 357.70 511.51
PCDRA2H-650-10 26 660.4 1200 2050 1540 2390 285 570 285 275 249 771 900 200.0 579.86 779.54
PCDRA2H-650-16 26 660.4 1150 2000 1390 2240 375 750 375 275 385 761 910 320.0 615.94 841.13
PCDRA2H-650-25 26 660.4 1200 2000 1470 2270 425 850 425 275 457 771 940 500.0 944.43 1224.68
PCDRA2H-650-40 26 660.4 1300 2000 1610 2310 500 1000 500 275 493 781 980 800.0 1302.76 1632.46
PCDRA2H-650-60 26 660.4 1400 2000 1750 2350 575 1150 575 275 571 791 1050 1200.0 1854.72 2220.34
PCDRA2H-700-1 28 711.2 1000 2100 1160 2260 210 420 210 275 171 782 850 20.0 128.40 210.00
PCDRA2H-700-3 28 711.2 1050 2100 1220 2270 225 450 225 275 200 792 880 60.0 207.56 318.83
PCDRA2H-700-6 28 711.2 1150 2100 1400 2350 275 550 275 275 234 802 900 120.0 373.43 527.24
PCDRA2H-700-10 28 711.2 1300 2100 1660 2460 285 570 285 275 248 822 950 200.0 635.56 823.49
O.D. Weight(kg)
Type NPS Lmin Lmax L1min L1max B H He dt E A1 A2 Permissible
(mm) Load(kN) at Lmin at Lmax
PCDRA2H-700-16 28 711.2 1200 2050 1440 2290 375 750 375 275 386 812 960 320.0 640.93 866.13
PCDRA2H-700-25 28 711.2 1250 2050 1520 2320 425 850 425 275 458 822 990 500.0 982.29 1262.53
PCDRA2H-700-40 28 711.2 1350 2050 1660 2360 500 1000 500 275 494 832 1030 800.0 1350.18 1679.88
PCDRA2H-700-60 28 711.2 1450 2050 1800 2400 575 1150 575 275 573 842 1100 1200.0 1917.20 2282.81
PCDRA2H-750-1 30 762.0 1050 2300 1210 2460 250 500 250 326 190 832 900 20.0 153.58 263.97
PCDRA2H-750-3 30 762.0 1100 2300 1270 2470 250 500 250 326 212 842 930 60.0 233.84 375.14
PCDRA2H-750-6 30 762.0 1200 2300 1450 2550 295 590 295 326 245 852 950 120.0 408.46 599.51
PCDRA2H-750-10 30 762.0 1350 2300 1710 2660 325 650 325 326 267 862 990 200.0 650.94 869.07
PCDRA2H-750-16 30 762.0 1250 2050 1490 2290 375 750 375 326 411 862 1010 320.0 721.32 933.27
PCDRA2H-750-25 30 762.0 1300 2050 1570 2320 450 900 450 326 478 872 1040 500.0 1092.11 1370.29
PCDRA2H-750-40 30 762.0 1400 2050 1710 2360 525 1050 525 326 514 882 1080 800.0 1485.56 1807.02
PCDRA2H-750-60 30 762.0 1500 2050 1850 2400 585 1170 585 326 582 892 1150 1200.0 2026.28 2367.26
PCDRA2H-800-1 32 812.8 1100 2400 1260 2560 250 500 250 326 193 883 950 20.0 165.16 279.97
PCDRA2H-800-3 32 812.8 1150 2400 1320 2570 250 500 250 326 212 893 980 60.0 243.90 391.09
PCDRA2H-800-6 32 812.8 1300 2400 1580 2680 300 600 300 326 246 903 1000 120.0 469.98 664.27
PCDRA2H-800-10 32 812.8 1400 2400 1760 2760 325 650 325 326 268 923 1050 200.0 749.02 1016.90
PCDRA2H-800-16 32 812.8 1300 2100 1540 2340 400 800 400 326 422 913 1060 320.0 781.27 1007.35
PCDRA2H-800-25 32 812.8 1350 2100 1620 2370 450 900 450 326 479 923 1100 500.0 1132.91 1411.09
PCDRA2H-800-40 32 812.8 1450 2100 1760 2410 525 1050 525 326 515 933 1130 800.0 1536.39 1857.84
PCDRA2H-800-60 32 812.8 1550 2100 1900 2450 585 1170 585 326 583 943 1200 1200.0 2090.56 2431.54
PCDRA2H-850-1 34 863.6 1150 2450 1310 2610 250 500 250 326 193 934 1000 20.0 172.06 286.87
PCDRA2H-850-3 34 863.6 1200 2450 1370 2620 250 500 250 326 213 944 1030 60.0 253.96 401.14
PCDRA2H-850-6 34 863.6 1350 2450 1630 2730 300 600 300 326 246 954 1050 120.0 487.88 682.17
PCDRA2H-850-10 34 863.6 1450 2450 1830 2830 325 650 325 326 267 974 1100 200.0 799.11 1066.99
PCDRA2H-850-16 34 863.6 1350 2150 1590 2390 400 800 400 326 422 964 1110 320.0 810.34 1036.42
PCDRA2H-850-25 34 863.6 1400 2150 1670 2420 450 900 450 326 480 974 1150 500.0 1173.70 1451.89
PCDRA2H-850-40 34 863.6 1500 2150 1810 2460 525 1050 525 326 516 984 1180 800.0 1587.21 1908.67
PCDRA2H-850-60 34 863.6 1600 2150 1950 2500 600 1200 600 326 590 994 1250 1200.0 2192.12 2541.84
PCDRA2H-900-1 36 914.4 1200 2500 1360 2660 250 500 250 326 193 985 1050 20.0 178.96 293.77
PCDRA2H-900-3 36 914.4 1250 2500 1420 2670 250 500 250 326 213 995 1080 60.0 264.01 411.20
PCDRA2H-900-6 36 914.4 1400 2500 1680 2780 300 600 300 326 247 1005 1110 120.0 505.77 700.06
PCDRA2H-900-10 36 914.4 1500 2500 1880 2880 325 650 325 326 268 1025 1150 200.0 826.07 1093.96
PCDRA2H-900-16 36 914.4 1400 2200 1640 2440 400 800 400 326 423 1015 1160 320.0 839.41 1065.49
PCDRA2H-900-25 36 914.4 1450 2200 1720 2470 450 900 450 326 480 1025 1200 500.0 1214.50 1492.68
PCDRA2H-900-40 36 914.4 1550 2200 1860 2510 525 1050 525 326 517 1035 1230 800.0 1638.04 1959.50
PCDRA2H-900-60 36 914.4 1650 2200 2000 2550 600 1200 600 326 602 1045 1310 1200.0 2310.67 2660.39
PCDRA2H-950-1 38 965.2 1250 2600 1410 2760 275 550 275 359 205 1036 1100 20.0 199.86 331.00
PCDRA2H-950-3 38 965.2 1300 2600 1490 2790 275 550 275 359 224 1046 1130 60.0 316.10 484.48
PCDRA2H-950-6 38 965.2 1450 2600 1750 2900 325 650 325 359 257 1056 1160 120.0 576.28 796.33
PCDRA2H-950-10 38 965.2 1600 2600 2010 3010 350 700 350 359 278 1076 1200 200.0 951.48 1239.97
PCDRA2H-950-16 38 965.2 1450 2300 1690 2540 425 850 425 358 435 1066 1210 320.0 903.18 1158.41
PCDRA2H-950-25 38 965.2 1500 2300 1770 2570 475 950 475 358 492 1076 1250 500.0 1298.12 1611.34
PCDRA2H-950-40 38 965.2 1600 2300 1910 2610 550 1100 550 358 529 1086 1280 800.0 1742.28 2104.95
PCDRA2H-950-60 38 965.2 1700 2300 2050 2650 625 1250 625 358 614 1096 1360 1200.0 2443.43 2840.83
PCDRA2H-1000-1 40 1016.0 1300 2700 1460 2860 275 550 275 359 205 1086 1150 20.0 207.20 343.20
PCDRA2H-1000-3 40 1016.0 1350 2700 1540 2890 275 550 275 359 224 1096 1180 60.0 327.70 502.56
PCDRA2H-1000-6 40 1016.0 1500 2700 1800 3000 325 650 325 359 258 1106 1210 120.0 595.87 825.48
PCDRA2H-1000-10 40 1016.0 1650 2700 2060 3110 350 700 350 359 279 1126 1250 200.0 980.91 1283.82
PCDRA2H-1000-16 40 1016.0 1500 2400 1740 2640 425 850 425 358 436 1116 1260 320.0 933.13 1203.37
PCDRA2H-1000-25 40 1016.0 1600 2400 1870 2670 475 950 475 358 494 1126 1300 500.0 1359.52 1672.74
PCDRA2H-1000-40 40 1016.0 1650 2400 1960 2710 550 1100 550 358 531 1136 1330 800.0 1794.29 2182.86
PCDRA2H-1000-60 40 1016.0 1750 2400 2100 2750 625 1250 625 358 617 1146 1410 1200.0 2512.38 2942.90
For special requirement in the case of dynamic events, the sway brace will provide to protect the piping and equipments.
Sway braces are generally designed to use of coil spring(s) and limiting force is generated by resistance of coil spring caused by displace-
ment, no matter what causes the displacement.
Therefore the same resistance will be generated by both vibration and thermal expansion of piping.
Because of this disadvantage, sway brace should be installed where any effect due to thermal expansion and contraction is as small as
possible.
Therefore, snubber will be recommendable for earthquake, dynamic load or large displacement.
SB D - 40 - 03
(Type SBD)
Recommended Pipe OD
(Type SBM)
Assembly Type(D,M,S) (Refer Fig.)
Sway braces are classified into two basic categories of (Type SBS)
double spring type and single spring type, Fig . 6.1
by their different characteristic and application,
as summarized in Table 6.1and described in detail.
P P
-P -P
(Type SBD, SBM ) (Type SBS )
2 7 9 10 1 11
12
3
8 4 6 5
6.4 Dimension
(1) Type SBD
AFTER ADJUSTMEN T
W
B
H
C-C
Dimension : mm
C-C Weight
Type A B L W H
min max (max, kg)
SBD-40-03 50 88 350 3 12 634 1400 12
SBD-80-03 50 95 400 3 12 704 1700 17
SBD-125-06 70 95 400 4 12 724 1730 25
SBD-200-1 70 118 485 6 15 814 1800 34
SBD-300-1 75 118 550 6 15 910 2000 47
SBD-350-3 75 128 680 8 17 1046 2000 69
AFTER ADJUSTMEN T
W
B
A
L
C-C
Dimension : mm
C-C Weight
Type A B L W H
min max (max, kg)
SBM-40-03 50 88 350 3 12 465 1000 7
SBM-80-03 50 95 400 3 12 480 1100 12
SBM-125-06 70 95 400 4 12 535 1200 18
SBM-200-1 70 118 485 6 15 550 1200 28
SBM-300-1 75 118 550 6 15 630 1200 38
SBM-350-3 75 128 680 8 17 680 1300 53
AFTER ADJUSTMEN T
W
H
C-C
Dimension : mm
C-C Weight
Type A B L W H
min max (max, kg)
SBS-40-03 50 88 550 3 12 895 1200 11
SBS-80-03 50 95 600 3 12 900 1515 15
SBS-125-06 70 95 605 4 12 900 1680 22
SBS-200-1 70 118 660 6 15 985 1720 30
SBS-300-1 75 118 745 6 15 1035 1720 42
SBS-350-3 75 128 770 8 17 1100 1870 65
1) Shows a Type SBD sway brace unit, installed between structure and piping using a clamp, with adjusted total length of
two coil springs, 2L, while its free length is 2Lf and spring constant is k. When each spring is compressed from Lf to
L by adjusting nuts , each spring will generate the same strength of reaction force, k(Lf - L), at the opposite direction
of A and B, which is balanced and no force will work on the piping.
2) During vibration, when the piping displaces by B toward B direction, as shown in right spring will generate force k[Lf-(L
-B)] toward A direction, while left spring will generate k[Lf-(L+B)] toward B direction. The difference of these two
force is k[Lf-(L-B)] - k[Lf-(L-B)] = 2k B which will work to pull back the piping, toward A direction.
3) By using two coil spring, spring force as much as two times of the spring constant will be generated, as above 2).
4) Shows piping displacement of A toward A direction, where spring force of 2k A will be generated toward A direc-
tion.
5) S
way brace is so installed as to balance at hot condition, therefore, reaction force due to thermal expansion will generate
when piping gets cold.
Range of two times of spring constant can be widened by increasing preset, however, preset should be as small as
possible, within range not less than vibration width, to reduce above reaction force.
6) A
ll sway brace are fitted at each end part with a self-aligning ball bush bearing capable of 6 degrees rotation of the
axis direction .
A Direction B Direction
1) Application
2) Required vibration eliminating force
3) Travel and its direction, due to thermal expansion
4) Steel structure and any blocking condition
5) Pipe diameter, insulation thickness and pipe temperature
6) Dimension at pipe center to exist steel
7) Amplitude of vibration
(2) Procedures
When necessary data and specification are provided, following procedure are typically proceeded to select the required sway brace;
1) Basic Classification
T ype SBD and SBM should be selected instead of SBS type, when small reacting force on the piping or component
is required, rather than vibration eliminating capacity.
T ype SBS is used when complete eliminating of vibration is more important than effect of reacting force on the
piping and component.
2) Vibration eliminating force
Determine required size number in Table 6.2, which complies with necessary vibration eliminating force.
3) Travel
Calculate a required travel for the unit, and then determine necessary type number in Table
4) Supporting type
F or Type SBD and SBM sway brace, supporting type is determined depending on the distance between piping and
steel structure. Type SBD should be used whenever the distance is sufficient, while Type SBM may be used for a
short distance.
Only one supporting type is available for type SBS sway brace.
The difference is that this SBS Type unit is not equipped with a preset piece.
3
Pipe Clamps
Pipe Clamp encloses the pipe and transfers the pipe load to other components.
To select the clamp exactly, the following various data are required;
Load
Pipe diameter
Design/operating temperature of the pipe
Insulation thickness
Installation configuration considering the surrounding structures
To appropriate coverage of the whole spectrum with safe products, the products were grouped systemically and selected automatically
by computer program.
L : Light Duty
H : Heavy Duty
H : Hanging S : One Bolt
PCHDA-150-H R : Heavy Duty with Rib N/A
Type D : Two Bolts
(R, R1, R2 according to
load capacity)
C : Carbon Steel
PCSA-150-400note 1 S : Supporting Type (A36) up to 399 N/A E-dim
L : Light Duty
PCHYA1-200-L HY : Hanging Yoke Type N/A
H : Heavy Duty
note 1) Dimensions of sliding plate attached supporting type are equal to A and C subtracted by 20mm.
2) Nominal Pipe Size(NPS), Nominal Diameter(DN), and Outside Diameter(OD), see following table.
PC - 1 134
Various Types of Pipe Clamp
Type PCHS Hanging Type(Single Bolt) Type PCHD : Hanging Type(Double Bolt)
Type PCHD-R : Hanging Type with Rib Type PCR : Riser Clamp
Type PCS : Supporting Type Type PCSP : Supporting Type with Exten-
sion Pipe
135 PC - 2
Pipe Clamps
2.0 Hanging Type Clamp(PCHS, PCHD)
C
E
.
O.D
E
d2
F W
Dimension : mm
PC - 3 136
2.2 Single Bolt(PCHSA, Alloy Steel)
Material : Alloy Steel(A387Gr.22)
Applicable Temperature : up to 580
C
E
.
O.D
E
d2
F W
Dimension : mm
137 PC - 4
Pipe Clamps
C
R
E
.
O.D
(H)
d2
t F
W
Dimension : mm
O.D. Weight
Type NPS C E F R H W d2
(mm) (kg)
PCHSC-6-4 1/8 10.3 13 20 4 10 40 80 12 0.21
PCHSC-8-4 1/4 13.7 13 25 4 10 50 80 12 0.23
PCHSC-10-4 3/8 17.1 13 28 4 10 56 80 12 0.23
PCHSC-15-4 1/2 21.3 15 30 15 10 60 80 14 0.26
PCHSC-20-4 3/4 26.9 15 35 15 10 70 80 14 0.29
PCHSC-25-4 1 33.7 15 40 15 10 80 80 14 0.32
PCHSC-32-4 1.25 42.4 15 45 15 10 90 80 14 0.36
PCHSC-40-4 1.5 48.3 15 50 15 10 100 80 14 0.4
PCHSC-50-4 2 60.3 15 54 15 10 108 80 14 0.58
PCHSC-65-4 2.5 73 15 65 15 10 130 80 14 0.86
PCHSC-80-4 3 88.9 20 75 22 16 150 100 18 1.34
PCHSC-100-4 4 114.3 20 92 22 16 184 100 18 1.63
PCHSC-125-4 5 139.7 20 110 22 16 220 100 18 1.94
PCHSC-150-4 6 168.3 20 125 22 19 250 150 18 2.67
PCHSC-200-4 8 219.1 20 155 22 19 310 150 18 4.43
PCHSC-250-4 10 273 30 195 22 19 390 200 22 6.24
PCHSC-300-4 12 323.9 30 220 22 19 440 200 22 8.10
PCHSC-350-4 14 355.6 30 235 22 19 470 200 22 9.79
PCHSC-400-4 16 406.4 30 265 22 19 530 250 22 12.26
PCHSC-450-4 18 457.2 30 290 22 19 580 250 22 14.83
PCHSC-500-4 20 508 35 325 28 25 650 300 26 15.73
PCHSC-550-4 22 558.8 35 355 28 25 710 300 26 19.65
PCHSC-600-4 24 609.6 35 380 28 25 760 300 26 21.12
PCHSC-650-4 26 660.4 35 405 28 25 810 350 26 22.59
PCHSC-700-4 28 711.2 35 430 28 25 860 350 26 27.09
PCHSC-750-4 30 762 35 455 28 25 910 350 26 28.74
PCHSC-800-4 32 812.8 35 480 28 25 960 400 26 33.79
PCHSC-850-4 34 863.6 35 505 28 25 1010 400 26 35.74
PCHSC-900-4 36 914.4 35 530 28 25 1060 400 26 37.49
PCHSC-950-4 38 965.2 45 575 28 25 1150 500 32 39.26
PCHSC-1000-4 40 1016 45 600 28 25 1200 500 32 41.25
PCHSC-1050-4 42 1066.8 45 630 28 25 1260 500 32 43.27
PCHSC-1200-4 48 1219.2 45 705 28 25 1410 500 32 49.94
note 1) These clamps to be used only for supporting type clamps together
PC - 5 138
2.4 Single Bolt(PCHSA, Alloy Steel)
Material : Alloy Steel(A387Gr.22 )
Applicable Temperature : up to 580
C
R
E
.
O.D
(H)
d2
t F
W
Dimension : mm
O.D. Weight
Type NPS C E F R H W d2
(mm) (kg)
PCHSA-6-4 1/8 10.3 13 20 4 10 40 80 12 0.21
PCHSA-8-4 1/4 13.7 13 25 4 10 50 80 12 0.23
PCHSA-10-4 3/8 17.1 13 28 4 10 56 80 12 0.23
PCHSA-15-4 1/2 21.3 15 30 15 10 60 80 14 0.26
PCHSA-20-4 3/4 26.9 15 35 15 10 70 80 14 0.29
PCHSA-25-4 1 33.7 15 40 15 10 80 80 14 0.32
PCHSA-32-4 1.25 42.4 15 45 15 10 90 80 14 0.36
PCHSA-40-4 1.5 48.3 15 50 15 10 100 80 14 0.40
PCHSA-50-4 2 60.3 15 54 15 10 108 80 14 0.58
PCHSA-65-4 2.5 73.0 15 65 15 10 130 80 14 0.86
PCHSA-80-4 3 88.9 20 75 22 16 150 100 18 1.34
PCHSA-100-4 4 114.3 20 92 22 16 184 100 18 1.63
PCHSA-125-4 5 139.7 20 110 22 16 220 100 18 1.94
PCHSA-150-4 6 168.3 20 125 22 19 250 150 18 2.67
PCHSA-200-4 8 219.1 20 155 22 19 310 150 18 4.43
PCHSA-250-4 10 273.0 30 195 22 19 390 200 22 6.24
PCHSA-300-4 12 323.9 30 220 22 19 440 200 22 8.10
PCHSA-350-4 14 355.6 30 235 22 19 470 200 22 9.79
PCHSA-400-4 16 406.4 30 265 22 19 530 250 22 12.26
PCHSA-450-4 18 457.2 30 290 22 19 580 250 22 14.83
PCHSA-500-4 20 508.0 35 325 28 25 650 300 26 15.73
PCHSA-550-4 22 558.8 35 355 28 25 710 300 26 19.65
PCHSA-600-4 24 609.6 35 380 28 25 760 300 26 21.12
PCHSA-650-4 26 660.4 35 405 28 25 810 350 26 22.59
PCHSA-700-4 28 711.2 35 430 28 25 860 350 26 27.09
PCHSA-750-4 30 762.0 35 455 28 25 910 350 26 28.74
PCHSA-800-4 32 812.8 35 480 28 25 960 400 26 33.79
PCHSA-850-4 34 863.6 35 505 28 25 1010 400 26 35.74
PCHSA-900-4 36 914.4 35 530 28 25 1060 400 26 37.49
PCHSA-950-4 38 965.2 45 575 28 25 1150 500 32 39.26
PCHSA-9100-4 40 1016.0 45 600 28 25 1200 500 32 41.25
PCHSA-1050-4 42 1066.8 45 630 28 25 1260 500 32 43.27
PCHSA-1200-4 48 1219.2 45 705 28 25 1410 500 32 49.94
note 1) These clamps to be used only for supporting type clamps together
139 PC - 6
Pipe Clamps
E d 1 d1
E
A
A
D. D.
O. O.
A
A
C1
C1
F W F T W
PC - 7 140
Continued Dimension : mm
141 PC - 8
Pipe Clamps
d 1 d1
E
A
A
D. D.
O. O.
A
A
C1
C1
F W F T W
note 1) For longer E-dimension than the standardized type, affix the E-dimension to type number as following manner : PCHDA-500-R-E700
Dimension : mm
PC - 9 142
Continued Dimension : mm
143 PC - 10
Pipe Clamps
Continued Dimension : mm
PC - 11 144
2.7 Yoke Type(PCHYA, Alloy Steel)
Material : Alloy Steel(A387 Gr.91)
Applicable Temperature : up to 620
B
A
F
D
C
.D
O
Dimension : mm
Permissible Weight
TYPE NPS O.D(mm) E A B C D E F W Load(kN) (kg)
PCHYA-200-L 8 219.1 660 370 180 75 22 660 100 35 12.0 17.32
PCHYA-200-H 8 219.1 710 430 280 75 42 710 200 70 56.5 41.38
PCHYA-250-L 10 273.1 690 440 180 75 26 690 100 45 22.0 20.97
PCHYA-250-H 10 273.1 740 510 300 100 56 740 200 85 77.1 62.67
PCHYA-300-L 12 323.9 710 490 180 75 26 710 100 45 22.0 21.90
PCHYA-300-H 12 323.9 760 560 300 100 56 760 200 85 77.1 64.38
PCHYA-350-L 14 355.6 730 520 180 75 26 730 100 45 22.0 22.54
PCHYA-350-H 14 355.6 780 600 300 100 56 780 200 85 77.1 65.79
PCHYA-400-L 16 406.4 750 570 180 75 26 750 100 45 22.0 23.45
PCHYA-400-H 16 406.4 800 650 300 100 56 800 200 85 77.1 67.48
PCHYA-450-L 18 457.2 780 650 180 75 35 780 100 50 35.4 33.50
PCHYA-450-H 18 457.2 830 730 330 125 66 830 200 105 99.3 109.42
PCHYA-500-L 20 508.0 800 700 180 75 35 800 100 50 35.5 35.50
PCHYA-500-H 20 508.0 850 780 330 125 66 850 200 105 99.3 121.95
PCHYA-550-L 22 558.0 830 750 200 100 35 830 100 50 29.4 41.20
PCHYA-550-H 22 558.0 880 830 350 150 66 880 200 105 106.5 135.56
PCHYA-600-L 24 609.0 850 800 200 100 35 850 100 50 29.2 42.59
PCHYA-600-H 24 609.0 900 880 350 150 66 900 200 105 106.5 138.88
PCHYA-650-L 26 660.0 880 870 300 100 42 880 200 70 42.8 59.15
PCHYA-650-H 26 660.0 930 960 360 200 76 930 200 110 158.1 168.47
PCHYA-700-L 28 711.2 910 920 300 100 42 910 200 70 42.8 60.94
PCHYA-700-H 28 711.2 960 1010 360 200 76 960 200 115 153.4 175.13
PCHYA-750-L 30 762.0 930 970 330 125 42 930 200 70 45.9 71.45
PCHYA-750-H 30 762.0 980 1060 360 200 76 980 200 115 153.4 179.26
PCHYA-800-L 32 812.8 960 1020 330 125 42 960 200 70 45.9 73.66
PCHYA-800-H 32 812.8 1010 1110 360 200 76 1010 200 115 153.4 183.73
PCHYA-850-L 34 863.6 980 1070 330 125 42 980 200 70 45.9 75.68
PCHYA-850-H 34 863.6 1030 1160 360 200 76 1030 200 115 153.4 187.85
PCHYA-900-L 36 914.4 1010 1120 330 125 42 1010 200 70 45.9 77.90
PCHYA-900-H 36 914.4 1060 1210 360 200 76 1060 200 115 153.4 192.34
PC - 11 145 PC - 12
Pipe Clamps
W
W
O.D.
D.
O.
E
E
T
T
C A C
A
E
W
.
.D
O.D. O
E
E
T
B B
A C A C
W
E
. W
.D
O
.
.D
O
E
E
T
T
B B
A C A C
Type PCSGC note 2) (over NPS 2) Type PCSGDC note 2) (over NPS 2)
PC - 13 146 PC - 12
E E W E E W
O
O
.D
.D
45
45
E
E
C
T
T
B B C
A A
E E
O
O
.D
.D
.
45
45
W
E
E
T
T
B W B
A C A C
note 1) Type PCSC to be sloped, if the distance between pipes were limited.
Then affix the sloped angle to type number as following manner : PCSC-20-63-30D.
2) Type PCSGC, PCSGDC available for inserting/installing another hanging type clamp.
3) For letter X of Type column in Dimension Table, refer to the above Figures.
PC - 13 147 PC - 14
Pipe Clamps
3.1.1 PCSC(Single and Double) Dimension : mm
PC - 15 148 PC - 14
Continued Dimension : mm
PC - 15 149 PC - 16
Pipe Clamps
Continued Dimension : mm
PC - 17 150 PC - 16
3.1.2 PCSC(Triple and Quadruple) Dimension : mm
PC - 17 151 PC - 18
Pipe Clamps
Continued Dimension : mm
PC - 19 152 PC - 18
3.2 Supporting Type (PCSA, Alloy Steel)
Material : Alloy Steel(A387Gr.22)
Applicable Temperature : up to 580
W
W
O.D.
D.
O.
E
E
T
T
A C A C
E
W
.
.D
O.D. O E
E
T
B B
A C A C
W
E
. W
.D
O
.
.D
O
E
E
T
T
B B
A C A C
PC - 19 153 PC - 20
Pipe Clamps
E E W E E W
O
O
.D
.D
45
45
E
E
C
T
T
B B C
A A
E E
O
O
.D
.D
.
45
45
W
E
E
T
T
B W B
A C A C
note 1) Type PCSA to be sloped, if the distance between pipes were limited.
Then affix the sloped angle to type number as following manner : PCSC-20-63-30D.
2) Type PCSGA, PCSGDA available for inserting/installing another hanging type clamp.
3) For letter X of Type column in Dimension Table, refer to the above Figures.
PC - 21 154 PC - 20
3.2.1 PCSA(Single and Double) Dimension : mm
PC - 21 155 PC - 22
Pipe Clamps
Continued Dimension : mm
PC - 23 156 PC - 22
Continued
Dimension : mm
PC - 23 157 PC - 24
Pipe Clamps
3.2.2 PCSA(Triple and Quadruple) Dimension : mm
PC - 25 158 PC - 24
Continued
Dimension : mm
PC - 25 159 PC - 26
Pipe Clamps
E
.
.D
O .
.D
O
E
E
A C
T
T
A C
note 1) Type PCSPC sloped installed, if the distance between pipes limited.
Then affix the sloped angle to type number as following manner : PCSPC-65-87-30D.
2) Type PCSPDC available for sustaining both directional forces.
3) For letter X of Type column in Dimension Table, refer to the above Figures.
Dimension : mm
PC - 27 160 PC - 26
Continued Dimension : mm
PC - 27 161 PC - 28
Pipe Clamps
E
.
.D
O .
.D
O
E
E
A C
T
T
A C
note 1) Type PCSPA sloped installed, if the distance between pipes limited.
Then affix the sloped angle to type number as following manner : PCSPA-65-137-30D.
2) Type PCSPDA available for sustaining both directional forces.
3) For letter X of Type column in Dimension Table, refer to the above Figures.
Dimension : mm
PC - 29 162 PC - 28
Continued
Dimension : mm
PC - 29 163 PC - 30
Pipe Clamps
F
D
D
O.
O.
A A A A
C-C C-C
d1 d1
E
E
W
T
Type PCRC-L/H Type PCRC-R
Dimension : mm
Permissible Load(kN)
O.D. C-C Weight(kg)
Type NPS E A W F d1 T 349 399
(mm)
L(min) L(max) at L(min) at L(max) at L(min) at L(max) at L(min) at L(max)
PCRC-15-L 1/2 21.3 250 600 25 25 50 15 13.5 - 3.4 1.6 3.0 1.4 1.90 4.10
PCRC-20-L 3/4 26.7 250 600 25 35 50 15 13.5 - 3.4 1.6 3.0 1.4 1.92 4.12
PCRC-25-L 1 33.4 250 600 25 40 50 15 13.5 - 3.4 1.6 3.0 1.4 1.95 4.14
PCRC-32-L 1 1/4 42.2 300 650 25 45 50 15 13.5 - 3.9 2.4 3.5 2.2 2.87 5.62
PCRC-40-L 1 1/2 48.3 300 650 25 50 50 15 13.5 - 3.9 2.3 3.5 2.1 2.90 5.65
PCRC-50-L 2 60.3 300 700 25 60 50 15 13.5 - 3.9 2.0 3.5 1.8 2.95 6.09
PCRC-65-L 2 1/2 73.0 300 750 25 75 50 15 13.5 - 5.4 1.8 4.8 1.6 4.69 9.99
PCRC-80-L 3 88.9 300 850 25 85 50 15 13.5 - 5.4 3.7 4.8 3.3 4.80 11.27
PCRC-80-H 3 88.9 300 850 25 90 60 28 13.5 - 10.8 4.5 9.7 4.0 5.76 13.53
PCRC-100-L 4 114.3 350 950 25 100 50 15 13.5 - 5.9 3.2 5.3 2.9 5.56 12.62
PCRC-100-H 4 114.3 350 950 25 100 60 28 13.5 - 11.8 3.9 10.6 3.5 6.67 15.14
PCRC-125-L 5 141.3 400 1000 25 115 60 15 17.5 - 7.0 3.6 6.3 3.2 7.58 16.06
PCRC-125-H 5 141.3 400 1000 25 115 75 28 13.5 - 14.0 3.6 12.5 3.2 9.47 20.07
PCRC-150-L 6 168.3 450 1050 25 140 70 28 17.5 - 10.7 7.4 9.6 6.6 13.31 26.50
PCRC-150-H 6 168.3 450 1050 25 140 85 28 17.5 - 21.4 9.2 19.2 8.2 16.16 32.17
PCRC-150-R 6 168.3 450 1050 30 140 85 42 21.5 10 36.4 20.6 32.6 18.4 16.16 32.17
PCRC-200-L 8 219.1 500 1150 30 170 100 28 21.5 - 23.5 9.7 21.0 8.7 21.49 41.90
PCRC-200-H 8 219.1 500 1150 30 170 130 28 21.5 - 47.0 12.9 42.1 11.6 27.94 54.47
PCRC-200-R 8 219.1 500 1150 45 170 130 42 35 10 79.9 45.0 71.5 40.3 27.94 54.47
PCRC-250-L 10 273.1 550 1400 30 200 110 28 21.5 - 28.0 8.6 25.1 7.7 26.43 55.79
PCRC-250-H 10 273.1 550 1400 30 210 150 28 25.5 - 62.6 18.8 56.0 16.8 45.22 95.27
PCRC-250-R 10 273.1 550 1400 45 215 160 42 35 10 106.4 61.8 95.2 55.3 48.24 101.62
PCRC-300-L 12 323.9 600 1450 30 225 120 28 21.5 - 31.0 9.4 27.8 8.4 32.27 64.29
PCRC-300-H 12 323.9 600 1450 30 235 150 28 25.5 - 67.0 18.5 60.0 16.6 50.58 100.63
PCRC-300-R 12 323.9 600 1450 45 235 160 42 35 15 113.9 61.0 101.9 54.6 53.95 107.33
PCRC-350-L 14 355.6 700 1500 30 255 130 28 25.5 - 36.2 15.8 32.4 14.1 49.86 90.68
PCRC-350-H 14 355.6 700 1500 30 255 160 28 25.5 - 72.4 19.5 64.8 17.5 61.37 111.61
PCRC-350-R 14 355.6 700 1500 45 255 170 42 35 15 123.1 68.0 110.2 60.9 65.21 118.59
PCRC-400-L 16 406.4 800 1600 30 280 140 42 25.5 - 43.0 16.1 38.5 14.4 60.79 104.75
PCRC-400-H 16 406.4 800 1600 35 290 170 42 35 - 86.0 27.3 77.0 24.4 88.81 152.86
PCRC-400-R 16 406.4 800 1600 45 300 170 42 35 15 146.2 77.7 130.9 69.5 88.81 152.86
PCRC-450-L 18 457.2 850 1700 35 310 150 42 35 - 49.1 16.4 43.9 14.7 67.43 120.41
PCRC-450-H 18 457.2 850 1700 35 325 190 42 35 - 98.2 28.9 87.9 25.9 102.74 183.28
PCRC-450-R 18 457.2 850 1700 55 330 190 42 42 15 166.9 93.7 149.4 83.9 102.74 183.28
PCRC-500-L 20 508.0 900 1800 35 335 170 42 35 - 53.9 17.7 48.2 15.8 85.02 145.08
PCRC-500-H 20 508.0 900 1800 35 350 200 42 35 - 107.8 29.2 96.5 26.1 120.30 205.08
PCRC-500-R 20 508.0 900 1800 55 355 190 42 42 20 183.3 99.7 164.1 89.2 114.29 194.83
PCRC-550-L 22 558.8 950 1900 35 365 180 42 35 - 58.1 17.9 52.0 16.0 95.61 162.72
PCRC-550-H 22 558.8 950 1900 35 375 230 42 35 - 116.2 33.7 104.0 30.2 146.90 249.82
PCRC-550-R 22 558.8 950 1900 55 380 210 42 42 20 197.5 116.5 176.8 104.3 134.13 228.09
PC - 31 164 PC - 30
Continued Dimension : mm
Permissible Load(kN)
O.D. C-C Weight(kg)
Type NPS E A W F d1 T 349 399
(mm)
L(min) L(max) at L(min) at L(max) at L(min) at L(max) at L(min) at L(max)
PCRC-600-L 24 609.6 1000 2000 35 395 190 42 35 - 56.0 18.2 50.1 16.3 106.80 181.37
PCRC-600-H 24 609.6 1000 2000 35 400 240 42 35 - 120.0 30.9 107.4 27.7 162.21 275.25
PCRC-600-R 24 609.6 1000 2000 55 415 220 42 42 25 204.0 122.5 182.6 109.6 148.69 252.31
PCRC-650-L 26 660.4 1050 2050 35 430 190 42 35 - 65.0 25.1 58.2 22.5 129.21 213.99
PCRC-650-H 26 660.4 1050 2050 35 435 260 42 35 - 130.0 33.6 116.4 30.1 186.64 309.10
PCRC-650-R 26 660.4 1050 2050 55 440 240 42 42 25 221.0 144.6 197.8 129.4 172.28 285.32
PCRC-700-L 28 711.2 1100 2100 35 460 220 42 35 - 70.0 26.4 62.7 23.6 138.98 232.95
PCRC-700-H 28 711.2 1100 2100 35 460 280 42 35 - 140.0 34.9 125.3 31.2 204.82 343.29
PCRC-700-R 28 711.2 1100 2100 55 465 250 42 42 25 238.0 155.5 213.0 139.2 182.87 306.51
PCRC-750-L 30 762.0 1150 2300 35 485 220 42 35 - 75.0 26.2 67.1 23.5 166.37 280.12
PCRC-750-H 30 762.0 1150 2300 35 485 290 42 35 - 150.0 33.7 134.3 30.2 229.75 386.83
PCRC-750-R 30 762.0 1150 2300 60 490 270 42 42 25 255.0 164.3 228.2 147.1 213.91 360.15
PCRC-800-L 32 812.8 1200 2400 35 505 230 42 35 - 80.0 27.7 71.6 24.8 190.78 320.77
PCRC-800-H 32 812.8 1200 2400 35 515 310 42 42 - 160.0 36.2 143.2 32.4 257.13 432.35
PCRC-800-R 32 812.8 1200 2400 60 520 300 42 47 25 272.0 195.6 243.4 175.1 248.84 418.40
PCRC-850-L 34 863.6 1250 2450 35 530 240 42 35 - 82.0 27.9 73.4 25.0 205.68 341.32
PCRC-850-H 34 863.6 1250 2450 35 540 330 42 42 - 165.0 38.0 147.7 34.0 279.04 465.56
PCRC-850-R 34 863.6 1250 2450 60 545 320 42 47 25 280.0 201.3 250.6 180.2 272.40 453.26
PCRC-900-L 36 914.4 1300 2500 35 560 260 42 35 - 85.0 31.2 76.1 27.9 235.01 381.96
PCRC-900-H 36 914.4 1300 2500 35 565 340 42 42 - 170.0 39.2 152.2 35.1 307.32 499.49
PCRC-900-R 36 914.4 1300 2500 60 570 330 42 47 25 289.0 232.0 258.7 207.6 298.28 484.80
PCRC-950-L 38 965.2 1540 2600 45 600 260 42 35 - 95.0 90.0 84.6 80.1 257.67 387.48
PCRC-950-H 38 965.2 1540 2600 55 610 340 62 42 - 160.0 150.0 142.4 133.5 338.49 508.24
PCRC-950-R 38 965.2 1540 2600 65 620 340 62 52 25 300.0 270.0 267.0 240.3 387.05 556.80
PCRC-1000-L 40 1016.0 1580 2700 45 630 270 42 35 - 95.0 90.0 84.6 80.1 276.23 418.66
PCRC-1000-H 40 1016.0 1580 2700 55 635 350 62 42 - 160.0 150.0 142.4 133.5 359.45 588.60
PCRC-1000-R 40 1016.0 1580 2700 65 640 340 62 52 25 300.0 260.0 267.0 231.4 397.62 576.98
PCRC-1050-L 42 1066.8 1650 2800 45 660 280 42 35 - 95.0 90.0 84.6 80.1 299.26 450.92
PCRC-1050-H 42 1066.8 1650 2800 55 665 360 62 42 - 160.0 150.0 142.4 133.5 386.15 581.14
PCRC-1050-R 42 1066.8 1650 2800 65 670 350 62 52 25 280.0 270.0 249.2 240.3 429.55 619.12
PCRC-1200-L 48 1219.2 1800 3000 45 740 300 42 35 - 94.0 90.0 83.7 80.1 353.46 523.02
PCRC-1200-H 48 1219.2 1800 3000 55 745 390 62 42 - 160.0 150.0 142.4 133.5 460.92 681.35
PCRC-1200-R 48 1219.2 1800 3000 65 750 360 62 52 30 290.0 270.0 258.1 240.3 494.13 697.61
PC - 31 165 PC - 32
Pipe Clamps
F
D
D
O.
O.
A A A A
C-C C-C
d1 d1
E
E
W
T
Type PCRA-L/H Type PCRA - R
Dimension : mm
PC - 33 166 PC - 32
Continued Dimension : mm
Permissible load(kN)
C-C Weight(kg)
Type NPS O.D. E A W F d1 T 455 480 510 535 565 580
(mm)
Lmin Lmax at Lmin at Lmax at Lmin at Lmax at Lmin at Lmax at Lmin at Lmax at Lmin at Lmax at Lmin at Lmax at Lmin at Lmax
PCRA-550-L 22 558.8 950 1900 35 365 180 42 35 - 58.1 17.9 52.3 16.1 44.2 13.6 31.4 9.7 23.2 7.2 19.8 6.1 95.61 162.72
PCRA-550-H 22 558.8 950 1900 35 375 230 42 35 - 116.2 33.7 105.0 30.3 88.3 25.6 62.7 18.2 46.5 13.5 39.5 11.5 146.90 249.82
PCRA-550-R 22 558.8 950 1900 55 380 210 42 42 20 197.5 116.5 178.0 105.0 150.0 89.0 107.0 62.9 79.0 46.6 67.2 39.6 134.13 228.09
PCRA-600-L 24 609.6 1000 2000 35 395 190 42 35 - 56.0 18.2 50.4 16.4 42.6 13.8 30.2 9.8 22.4 7.3 19.0 6.2 106.80 181.37
PCRA-600-H 24 609.6 1000 2000 35 400 240 42 35 - 120.0 30.9 108.0 27.8 91.2 23.5 64.8 16.7 48.0 12.4 40.8 10.5 162.21 275.25
PCRA-600-R 24 609.6 1000 2000 55 415 220 42 42 25 204.0 122.5 184.0 110.0 155.0 93.1 110.0 66.2 81.6 49.0 69.4 41.7 148.69 252.31
PCRA-650-L 26 660.4 1050 2050 35 430 190 42 35 - 65.0 25.1 58.5 22.5 49.4 19.0 35.1 13.5 26.0 10.0 22.1 8.5 129.21 213.99
PCRA-650-H 26 660.4 1050 2050 35 435 260 42 35 - 130.0 33.6 117.0 30.2 98.8 25.5 70.2 18.1 52.0 13.4 44.2 11.4 186.64 309.10
PCRA-650-R 26 660.4 1050 2050 55 440 240 42 42 25 221.0 144.6 199.0 130.0 168.0 110.0 119.0 78.1 88.4 57.8 75.1 49.2 172.28 285.32
PCRA-700-L 28 711.2 1100 2100 35 460 220 42 35 - 70.0 26.4 63.0 23.7 53.2 20.0 37.8 14.2 28.0 10.5 23.8 9.0 138.98 232.95
PCRA-700-H 28 711.2 1100 2100 35 460 280 42 35 - 140.0 34.9 126.0 31.4 106.0 26.5 75.6 18.8 56.0 14.0 47.6 11.9 204.82 343.29
PCRA-700-R 28 711.2 1100 2100 55 465 250 42 42 25 238.0 155.5 214.0 140.0 181.0 118.0 129.0 84.0 95.2 62.2 80.9 52.9 182.87 306.51
PCRA-750-L 30 762.0 1150 2300 35 485 220 42 35 - 75.0 26.2 67.5 23.5 57.0 19.9 40.5 14.1 30.0 10.5 25.5 8.9 166.37 280.12
PCRA-750-H 30 762.0 1150 2300 35 485 290 42 35 - 150.0 33.7 135.0 30.3 114.0 25.6 81.0 18.2 60.0 13.5 51.0 11.5 229.75 386.83
PCRA-750-R 30 762.0 1150 2300 55 490 270 42 42 25 255.0 164.3 230.0 148.0 194.0 125.0 138.0 89.0 102.0 65.7 86.7 55.9 213.91 360.15
PCRA-800-L 32 812.8 1200 2400 35 505 230 42 35 - 80.0 27.7 72.0 24.9 60.8 21.1 43.2 15.0 32.0 11.1 27.2 9.4 190.78 320.77
PCRA-800-H 32 812.8 1200 2400 35 515 310 42 42 - 160.0 36.2 144.0 32.6 122.0 27.5 86.4 19.5 64.0 14.5 54.4 12.3 257.13 432.35
PCRA-800-R 32 812.8 1200 2400 60 520 300 42 47 25 272.0 195.6 245.0 176.0 207.0 149.0 147.0 106.0 109.0 78.2 92.5 66.5 248.84 418.40
PCRA-850-L 34 863.6 1250 2450 35 530 240 42 35 - 82.0 27.9 73.8 25.1 62.3 21.2 44.3 15.1 32.8 11.2 27.9 9.5 205.68 341.32
PCRA-850-H 34 863.6 1250 2450 35 540 330 42 42 - 165.0 38.0 148.5 34.2 125.4 28.9 89.1 20.5 66.0 15.2 56.1 12.9 279.04 465.56
PCRA-850-R 34 863.6 1250 2450 60 545 320 42 47 25 280.0 201.3 252.0 181.2 212.8 153.0 151.2 108.7 112.0 80.5 95.2 68.4 272.40 453.26
PCRA-900-L 36 914.4 1300 2500 35 560 260 42 35 - 85.0 31.2 76.5 28.1 64.6 23.7 45.9 16.8 34.0 12.5 28.9 10.6 235.01 381.96
PCRA-900-H 36 914.4 1300 2500 35 565 340 42 42 - 170.0 39.7 153.0 35.7 129.0 30.2 91.8 21.4 68.0 15.9 57.8 13.5 307.32 499.49
PCRA-900-R 36 914.4 1300 2500 60 570 330 42 47 25 289.0 232.0 260.0 209.0 220.0 176.0 156.0 125.0 116.0 92.8 98.3 78.9 298.28 484.80
PCRA-950-L 38 965.2 1540 2600 45 600 260 42 35 - 96.0 91.0 80.0 76.0 63.0 59.0 51.0 48.0 32.0 31.0 18.0 17.0 257.67 387.48
PCRA-950-H 38 965.2 1540 2600 55 610 340 62 42 - 160.0 150.0 135.0 130.0 105.0 100.0 85.0 80.0 55.0 50.0 35.0 30.0 338.49 508.24
PCRA-950-R 38 965.2 1540 2600 65 620 340 62 52 25 300.0 270.0 250.0 230.0 200.0 180.0 160.0 150.0 92.0 90.0 48.0 47.0 387.05 556.80
PCRA-1000-L 40 1016.0 1580 2700 45 630 270 42 35 - 95.0 90.0 80.0 76.0 63.0 59.0 51.0 48.0 32.0 31.0 18.0 17.0 276.23 418.66
PCRA-1000-H 40 1016.0 1580 2700 55 635 350 62 42 - 160.0 150.0 140.0 130.0 110.0 100.0 85.0 80.0 55.0 50.0 34.0 30.0 359.45 588.60
PCRA-1000-R 40 1016.0 1580 2700 65 640 340 62 52 25 300.0 260.0 250.0 230.0 195.0 170.0 160.0 140.0 85.0 80.0 45.0 40.0 397.62 576.98
PCRA-1050-L 42 1066.8 1650 2800 45 660 280 42 35 - 96.0 91.0 80.0 76.0 63.0 59.0 51.0 48.0 32.0 31.0 18.0 17.0 299.26 450.92
PCRA-1050-H 42 1066.8 1650 2800 55 665 360 62 42 - 160.0 150.0 135.0 130.0 105.0 100.0 85.0 80.0 55.0 50.0 32.0 30.0 386.15 581.14
PCRA-1050-R 42 1066.8 1650 2800 65 670 350 62 52 25 290.0 270.0 240.0 230.0 190.0 180.0 150.0 140.0 85.0 80.0 43.0 40.0 429.55 619.12
PCRA-1200-L 48 1219.2 1800 3000 45 740 300 42 35 - 94.0 90.0 78.0 76.0 60.0 58.0 50.0 48.0 32.0 30.0 17.0 15.0 353.46 523.02
PCRA-1200-H 48 1219.2 1800 3000 55 745 390 62 42 - 160.0 150.0 135.0 130.0 105.0 100.0 85.0 80.0 55.0 50.0 32.0 30.0 460.92 681.35
PCRA-1200-R 48 1219.2 1800 3000 65 750 360 62 52 30 290.0 270.0 240.0 230.0 190.0 180.0 155.0 150.0 92.0 90.0 92.0 90.0 494.13 697.61
PC - 33 167 PC - 34
< Blanked intentionally >
Threaded
Connecting Elements
1.0 Eye Nut(EN)
3.0 Turnbuckle(TB)
169
B T
E
X
H
1.0 Eye Nut(EN) d1 D
B T B T
E
E
X
X
H
H
d1 D d1 D
Forged Machined
(M12~M56) (M64~M100) Dimension : mm
Type B
Load(kN) T
E d1 X B H D T Weight(kg)
EN-M12 5.0 35 M12 26 38 21 34 13 0.28
EN-M16 8.0 35 M16 26 38 21 34 13 0.26
EN-M20 12.0 40 M20 34 50 29 49 20 0.91
EN-M24 22.0 40 M24 34 50 29 49 20 0.83
E
A D3
F1 D2
F1 D2
E
E
X
X
C
C
D1 D
d1 D A
Forged Machined
(M12~M56) (M64~M100)
Dimension : mm
TC - 1 170
3.0 Turnbuckle(TB)
X
B
B
E
E
B
B
E
C
C
d1 d1 d1 d1
LH LH LH LH
Forged Machined
(M12~M64) (M68~M100)
Dimension : mm
D D
D D
d1 d1
RH RH
RH RH
B
B
C
C
C
d1 d1 d1 d1
RH RH RH RH
Forged Machined
(M12~M64) (M68~M100)
Dimension : mm
171 TC - 2
Threaded Connecting Elements
d1
Dimension : mm
L1 L2
d
d1
TC - 3 172
7.0 Tie Rod[R/R](TRR)
Material : Carbon Steel
L max
L1 L1
d
d1
Right Hand Right Hand
Dimension : mm
L
d1
Dimension : mm
173 TC - 4
Threaded Connecting Elements
Lmax
d1
Dimension : mm
TC - 5 174
Structural
Attachments
1.0 Weld on Eye Plate(WP)
175 TC - 1
Structural Attachments
A T
E
B D
Dimension : mm
Load D Weight
Type (kN)
E A B T a
(kg)
WP-M12 5.0 45 35 22 14 8 6 0.13
WP-M16 8.0 50 45 28 18 10 6 0.23
WP-M20 12.0 55 60 37 22 12 6 0.44
WP-M24 22.0 60 65 40 26 15 7 0.64
WP-M30 40.0 70 80 50 35 20 9 0.95
WP-M36 60.0 80 100 65 42 25 10 1.79
WP-M42 80.0 90 120 75 48 30 11 3.73
WP-M48 100.0 100 130 80 55 30 14 4.25
WP-M56 160.0 110 150 90 66 40 16 7.20
WP-M64 200.0 120 170 100 76 45 18 10.01
WP-M68 240.0 130 180 110 76 45 20 11.90
WP-M72 300.0 140 220 120 87 50 22 21.13
WP-M80 380.0 150 250 135 100 60 22 28.49
WP-M100 500.0 170 280 150 110 65 28 37.89
R
G
d
E
S
Fmax
Dimension : mm
Load A B D d Weight
Type E S G Fmax R
(kN) (kg)
SWP-M12 5.0 16.5 15 70 24 18 13 11.0 40 17 0.60
SWP-M16 8.0 21.5 20 130 30 24 17 15.0 45 22 2.70
SWP-M20 12.0 22.5 20 130 36 29 21 18.0 50 27 2.70
SWP-M24 22.0 24.0 20 130 44 35 25 21.0 55 32 2.70
SWP-M30 40.0 35.0 30 170 56 44 31 26.5 60 41 6.80
SWP-M36 60.0 37.0 30 170 68 51 37 32.0 70 50 6.80
SWP-M42 80.0 39.0 30 170 78 59 43 36.5 90 58 6.80
SWP-M48 100.0 41.0 40 200 92 66 50 41.0 120 67 6.80
SWP-M56 160.0 47.0 45 250 103 76 58 50.0 140 79 13.90
SWP-M64 200.0 54.0 45 300 120 89 66 59.0 140 93 19.60
SWP-M68 240.0 61.0 45 350 128 95 70 64.0 150 100 22.10
SWP-M72 300.0 61.0 45 400 136 98 75 70.0 150 107 31.80
SWP-M80 380.0 64.0 55 450 152 110 83 78.0 180 120 43.30
SWP-M100 500.0 70.0 60 500 175 125 103 90.0 180 140 74.67
SA- 1 176
3.0 Weld on Lug Plate(WLX)
t l1 l3
C
h
F
CHH TYPE B1A TYPE B1
CHV TYPE LB1 TYPE LB2
B1A B1
Type Size t h 1 2 3 D C F a
Weight(kg) Weight(kg)
WLH-XXX-01 1-2 12 45 50 115 25.0 18 0.35 18 18 0.81 5
WLH-XXX-02 4-7 12 45 50 115 25.0 18 0.35 18 18 0.81 5
WLH-XXX-03 8-12 12 45 50 125 25.0 18 0.35 18 18 0.88 6
WLH-XXX-04 13-28 19 60 70 140 32.5 26 1.04 26 26 2.09 8
WLH-XXX-05 29-36 19 70 100 180 40.0 33 1.79 33 26 3.22 10
WLH-XXX-06 37-46 25 100 140 235 65.0 45 4.81 45 26 8.07 12
WLH-XXX-07 47-60 40 120 200 285 95.0 70 13.19 70 26 18.79 15
WLH-XXX-08 61-64 50 135 230 340 100.0 78 21.21 78 33 31.36 16
WLH-XXX-09 65-66 50 135 230 340 100.0 78 21.21 78 33 31.36 18
WLH-XXX-10 67-69 50 160 240 410 122.5 85 26.38 85 39 45.06 19
LB1 LB2
Type Size t h 1 2 3 D C F a
Weight(kg) Weight(kg)
WLV-XXX-01 8-12 12 45 50 100 20.0 18 0.35 18 14 0.71 5
WLV-XXX-02 13-28 19 60 70 117 27.0 26 1.04 26 18 1.75 6
WLV-XXX-03 29-36 19 70 100 150 35.0 33 1.79 33 22 2.68 8
WLV-XXX-04 37-46 25 100 140 195 50.0 45 4.81 45 26 6.70 10
WLV-XXX-05 47-60 40 120 200 245 70.0 70 13.19 70 26 16.16 12
WLV-XXX-06 61-66 50 135 230 310 85.0 78 21.21 78 33 28.59 12
WLV-XXX-07 67-69 50 160 240 383 122.5 85 26.38 85 45 42.09 15
note 1) XXX : LB1 for type CHV-LB1, LB2 for type CHV-LB2
177 SA - 2
Structural Attachments
4.0 Weld Beam Attachment(BAD)
A A
a
a a
a
E
E
E
D D
E
D
T G W
T G
T G W
W
T G
M12~M56
M12 ~ M48 M64~M80
M56 ~ M80 W
T G TYP.2 W T G TYP.2 W T G T
a a a
E
E
E
L
D D
M12M12~M24
~M24 M30 ~M100
M30~M80 Dimension : mm M1
SA- 3 178
6.0 Weld on Eye Plate with Anchor Plate(WPA)
t
E
B
D
A T
4-H HOLES
Dimension : mm
W
H
Dimension : mm
Bolt
Type L W H
H
(M-size)
UC-1 16~18 130 60 75
UC-2 18~24 175 75 90
179 SA - 4
< Blanked intentionally >
Guides and
Restraints
1.0 Pipe Covering Protection Saddle(PPS)
8.0 U-Bolt/4Nuts(UB)
181
Guides and Restraints
1.0 Pipe Covering Protection Saddle(PPS)
tc
.
Material : Carbon Steel .D
O
Applicable Temperature : up to 399
Material : Alloy Steel(A387Gr.22)
Applicable Temperature : up to 450
C
L
tc tc
.
. D. .D
O O
C
C
L L
Load(kN) Dimension
Type Weight(kg)
349 399 450 O.D. tc L C
C
GR - 1 182
Dimension : mm
Continued tc : insulation thickness
Load(kN) Dimension
Type Weight(kg)
349 399 450 O.D. tc L C
PPSX-125-80 9.0 8.1 9.0 141.3 80 300 157 7.35
PPSX-125-100 9.0 8.1 9.0 141.3 100 300 181 8.49
PPSX-150-25 9.0 8.1 9.0 168.3 25 300 114 5.94
PPSX-150-40 9.0 8.1 9.0 168.3 40 300 129 7.02
PPSX-150-50 9.0 8.1 9.0 168.3 50 300 140 7.74
PPSX-150-65 9.0 8.1 9.0 168.3 65 300 157 8.81
PPSX-150-80 9.0 8.1 9.0 168.3 80 300 167 9.89
PPSX-150-100 9.0 8.1 9.0 168.3 100 300 192 11.32
PPSX-200-40 9.0 8.1 9.0 219.1 40 300 152 8.27
PPSX-200-50 9.0 8.1 9.0 219.1 50 300 165 8.99
PPSX-200-65 9.0 8.1 9.0 219.1 65 300 184 10.06
PPSX-200-80 9.0 8.1 9.0 219.1 80 300 195 11.14
PPSX-200-100 9.0 8.1 9.0 219.1 100 300 221 12.58
PPSX-250-40 9.0 8.1 9.0 273.1 40 300 184 9.60
PPSX-250-50 9.0 8.1 9.0 273.1 50 300 194 10.32
PPSX-250-65 9.0 8.1 9.0 273.1 65 300 206 11.40
PPSX-250-80 9.0 8.1 9.0 273.1 80 300 221 12.47
PPSX-250-100 9.0 8.1 9.0 273.1 100 300 248 13.91
PPSX-300-40 24.0 21.5 24.0 323.9 40 300 205 13.02
PPSX-300-50 24.0 21.5 24.0 323.9 50 300 219 13.89
PPSX-300-65 24.0 21.5 24.0 323.9 65 300 232 15.18
PPSX-300-80 24.0 21.5 24.0 323.9 80 300 244 16.47
PPSX-300-100 24.0 21.5 24.0 323.9 100 300 274 18.19
PPSX-350-40 24.0 21.5 24.0 355.6 40 300 222 17.45
PPSX-350-50 24.0 21.5 24.0 355.6 50 300 237 18.53
PPSX-350-65 24.0 21.5 24.0 355.6 65 300 251 20.14
PPSX-350-80 24.0 21.5 24.0 355.6 80 300 262 21.76
PPSX-350-100 34.0 30.4 34.0 355.6 100 300 287 23.91
PPSX-400-40 24.0 21.5 24.0 406.4 40 300 249 20.62
PPSX-400-50 24.0 21.5 24.0 406.4 50 300 259 21.77
PPSX-400-65 34.0 30.4 34.0 406.4 65 300 275 23.49
PPSX-400-80 34.0 30.4 34.0 406.4 80 300 281 25.21
PPSX-400-100 34.0 30.4 34.0 406.4 100 300 310 27.51
PPSX-450-40 24.0 21.5 24.0 457.2 40 300 275 22.62
PPSX-450-50 34.0 30.4 34.0 457.2 50 300 287 23.77
PPSX-450-65 34.0 30.4 34.0 457.2 65 300 295 25.49
PPSX-450-80 34.0 30.4 34.0 457.2 80 300 311 27.22
PPSX-450-100 34.0 30.4 34.0 457.2 100 300 338 29.51
PPSX-500-40 34.0 30.4 34.0 508.0 40 300 295 26.13
PPSX-500-50 34.0 30.4 34.0 508.0 50 300 311 27.66
PPSX-500-65 34.0 30.4 34.0 508.0 65 300 324 29.95
PPSX-500-80 34.0 30.4 34.0 508.0 80 300 338 32.23
PPSX-500-100 34.0 30.4 34.0 508.0 100 300 359 35.28
PPSX-600-40 34.0 30.4 34.0 609.6 40 300 343 47.09
PPSX-600-50 34.0 30.4 34.0 609.6 50 300 356 49.48
PPSX-600-65 34.0 30.4 34.0 609.6 65 300 371 53.05
PPSX-600-80 34.0 30.4 34.0 609.6 80 300 387 56.62
PPSX-600-100 34.0 30.4 34.0 609.6 100 300 418 61.39
note 1) For letter X, C stands for Carbon Steel, A for Alloy Steel
183 GR - 2
Guides and Restraints A
.D
O
C
Material : Alloy Steel(A387Gr.22)
Applicable Temperature : up to 450 L
A A
B B
tc tc
. .
.D .D
O O
C
C
L L
Load(kN) Dimension
Type tc
Weight(kg)
.D
. 349 399 450 O.D. tC A L B
O
PDSX-50-50 9.0 8.1 9.0 60.3 50.8 152 300 40 1.90
PDSX-50-75 9.0 8.1 9.0 60.3 76.2 152 300 40 2.00
PDSX-50-100 9.0 8.1 9.0 60.3 101.6 152 300 40 2.00
C
note 1) For letter X, C stands for Carbon Steel, A for Alloy Steel
GR - 3 184
3.0 Pipe Guide(Horizontal One Direction) (PHG)
B
D.
O.
TYP.2 a
1.6 T W
NOMINAL
Dimension : mm
Load(kN) O.D.
Type T W B a Weight(kg)
up to 349 up to 399 (mm)
PHG-15-L 1.9 1.7 21.3 10 50 80 4 0.80
PHG-20-L 1.9 1.7 26.7 10 50 80 4 0.80
PHG-25-L 1.9 1.7 33.4 10 50 87 4 0.90
PHG-32-L 3.5 3.1 42.2 10 76 95 4 1.50
PHG-40-L 3.5 3.1 48.3 10 76 105 4 1.60
PHG-50-L 3.5 3.1 60.3 10 76 120 4 1.90
PHG-65-L 3.5 3.1 73.0 12 76 131 6 2.50
PHG-80-L 3.5 3.1 88.9 12 101 146 6 3.80
PHG-100-L 4.0 3.6 114.3 12 101 171 6 4.50
PHG-150-L 4.0 3.6 168.3 12 152 221 6 9.00
PHG-200-L 4.0 3.6 219.1 12 152 271 6 11.10
PHG-100-H 8.9 8.0 114.3 19 101 175 6 7.30
PHG-150-H 8.9 8.0 168.3 19 152 225 6 14.50
PHG-200-H 8.9 8.0 219.1 19 152 275 6 17.90
D.
O.
TYP.2 a
A T W
Dimension : mm
Load(kN) O.D.
Type T A W a Weight(kg)
up to 349 up to 399 (mm)
PVG-15-L 4.0 3.6 21.3 10 75 50 4 0.60
PVG-20-L 4.0 3.6 26.7 10 90 50 4 0.70
PVG-25-L 2.8 2.5 33.4 10 100 50 4 0.70
PVG-32-L 2.8 2.5 42.2 10 115 76 4 1.30
PVG-40-L 2.8 2.5 48.3 10 125 76 4 1.50
PVG-50-L 2.8 2.5 60.3 10 140 76 4 1.70
PVG-65-L 4.0 3.6 73.0 12 150 76 6 2.30
PVG-80-L 5.0 4.5 88.9 12 165 101 6 3.50
PVG-100-L 6.7 6.0 114.3 12 180 101 6 4.10
PVG-150-L 6.7 6.0 168.3 12 250 152 6 8.80
PVG-200-L 6.7 6.0 219.1 12 325 152 6 11.30
PVG-100-H 8.9 8.0 114.3 16 180 101 6 5.60
PVG-150-H 8.9 8.0 168.3 16 250 152 6 11.90
PVG-200-H 8.9 8.0 219.1 16 325 152 6 15.20
185 GR - 4
Guides and Restraints
5.0 Guide with Extension(GUE)
AL
6 IN
1. OM
N
.
O.D D.
O.
D D
T
E L E L W
GUE-XX-N GUE-XX-G
Dimension : mm
Vertical Load(kN) Horizontal Load(kN) O.D. Weight
Type TxW D E L
up to 349 up to 399 up to 349 up to 399 (mm) (kg)
GUE-15-X 2.67 2.39 4.45 3.98 21.3 10 x 50 11 15 105 0.60
GUE-20-X 2.67 2.39 4.45 3.98 26.7 10 x 50 11 15 110 0.70
GUE-25-X 3.56 3.19 5.35 4.79 33.4 10 x 50 11 15 116 0.70
GUE-32-X 7.13 6.38 7.13 6.38 42.2 13 x 64 14 19 148 1.40
GUE-40-X 7.13 6.38 7.13 6.38 48.3 13 x 64 14 19 154 1.50
GUE-50-X 7.13 6.38 7.13 6.38 60.3 13 x 64 14 19 165 1.70
GUE-65-X 6.68 5.98 7.13 6.38 73.0 16 x 76 14 19 185 3.40
GUE-80-X 6.68 5.98 6.68 5.98 88.9 16 x 76 14 19 210 3.80
GUE-100-X 8.91 7.97 6.24 5.58 114.3 19 x 152 18 24 256 11.80
Note 1) For letter X, G stands for with gap, N for without gap
2) Vertical and lateral load capacities is to be based on loads applied concurrently.
D.
O. .D
.
O
TYP.2 a TYP.2 a
T 1.6 T W
NOMINAL
GUS-XX-N GUS-XX-G
Dimension : mm
Vertica Load(kN) Horizontal Load(kN)
Type O.D.(mm) TxW a Weight (kg)
up to 349 up to 399 up to 349 up to 399 Dimension : mm
GUZ-15-X 4.0 3.6 4.0 3.6 21.3 10 x 50 6 0.30
GUZ-20-X 4.3 3.8 4.3 3.8 26.7 10 x 50 6 0.30
GUZ-25-X 2.8 2.5 2.8 2.5 33.4 10 x 50 6 0.40
GUZ-32-X 3.8 3.4 3.8 3.4 42.2 13 x 64 7 0.90
GUZ-40-X 3.8 3.4 3.8 3.4 48.3 13 x 64 7 1.00
GUZ-50-X 4.1 3.7 4.1 3.7 60.3 13 x 64 7 1.20
GUZ-65-X 4.2 3.8 4.2 3.8 73.0 16 x 76 9 2.00
GUZ-80-X 5.4 4.8 5.4 4.8 88.9 16 x 76 9 2.30
GUZ-100-X 5.6 5.0 5.6 5.0 114.3 19 x 152 9 7.30
note 1) For letter X, G stands for with gap, N for without gap
2) Vertical and lateral load capacities is to be based on loads applied concurrently.
3) For letter Z, C stands for carbon, S for Stainless
GR - 5 186
7.0 Anchor Strap(PAX)
a1
.
.D
O
H
TYP.2
a2
B W
PAX-L
b A b
a1
.
.D
O
3SIDES 3SIDES
TYP.2 a2 a2 TYP.4
B W
PAX-H
Dimension : mm
note 1) For letter X, C stands for Carbon Steel, S for Stainless Steel
2) The above load capacity was derived under assumption that all forces and moments apply concurrently.
187 GR - 6
Guides and Restraints
8.0 U-Bolt/4 Nut(UB)
R .
.D
O
B
d1 L
Dimension : mm
note 1) For letter X, C stands for Carbon Steel, S for Stainless Steel
2) For concurrent loads, the following interaction equation will be useful ;
Where , are tabulated vertical load, and lateral load
, are applied vertical load, lateral load.
GR - 7 188
9.0 Guide Plate(GP) a
3SIDES
TYP.2
E
C
Material : Carbon Steel D
T
3SIDES
a TYP.2
E
C
A
Dimension : mm
Type A C D T E a Weight(kg)
GP10x30x50 50 30 20 10 10 6 0.12
GP10x30x50 50 30 20 10 8 6 0.12
GP15x30x50 50 30 25 15 8 6 0.18
GP15x30x55 55 30 25 15 10 6 0.19
GP15x40x60 60 40 25 15 12 6 0.28
GP20x40x65 65 T 40 25 20 14 6 0.41
GP20x60x80 80 60 25 20 17 6 0.75
GP30x60x80 80 60 25 30 20 6 1.13
GP30x60x110 110 60 25 30 22 6 1.55
189 GR - 8
Guides and Restraints
10.0 U-Bolt Plate(UBPL)
2-E HOLES
30
C
B
3SIDES
30
6
F G
30 D
Dimension : mm
U-bolt/4 Nut
Type Size(txAxB) C D E F G Weight(kg)
Size
UBPL-06 UBX-6-M6 PL8x80x79 19 50 8 20 30 0.40
UBPL-08 UBX-8-M6 PL8x80x81 21 50 8 20 30 0.41
UBPL-10 UBX-10-M6 PL8x80x84 24 50 8 20 30 0.42
UBPL-15 UBX-15-M6 PL8x80x91 31 50 8 20 30 0.46
UBPL-20 UBX-20-M6 PL8x80x96 36 50 8 20 30 0.48
UBPL-25 UBX-25-M10 PL8x80x106 46 50 12 20 30 0.53
UBPL-32 UBX-32-M10 PL8x80x115 55 50 12 20 30 0.58
UBPL-40 UBX-40-M10 PL8x80x121 61 50 12 20 30 0.61
UBPL-50 UBX-50-M12 PL8x105x136 76 75 14 30 45 0.90
UBPL-65 UBX-65-M12 PL8x105x148 88 75 14 30 45 0.98
UBPL-80 UBX-80-M12 PL8x105x164 104 75 14 30 45 1.08
UBPL-100 UBX-100-M16 PL8x105x193 133 75 18 30 45 1.27
UBPL-125 UBX-125-M16 PL8x105x220 160 75 18 30 45 1.45
UBPL-150 UBX-150-M16 PL8x105x247 187 75 18 30 45 1.63
UBPL-200 UBX-200-M20 PL8x135x304 244 105 22 35 70 2.58
UBPL-250 UBX-250-M20 PL8x135x357 297 105 22 35 70 3.03
UBPL-300 UBX-300-M20 PL8x135x408 348 105 22 35 70 3.46
UBPL-350 UBX-350-M24 PL10x155x446 386 125 26 40 85 4.34
UBPL-400 UBX-400-M24 PL10x155x497 437 125 26 40 85 4.84
UBPL-450 UBX-450-M24 PL10x155x548 488 125 26 40 85 5.33
UBPL-500 UBX-500-M24 PL10x155x598 538 125 26 40 85 5.82
UBPL-550 UBX-550-M24 PL10x155x649 589 125 26 40 85 6.32
UBPL-600 UBX-600-M30 PL10x175x708 648 145 32 45 100 7.78
UBPL-700 UBX-700-M30 PL10x175x810 750 145 32 45 100 8.90
UBPL-750 UBX-750-M30 PL10x175x860 800 145 32 45 100 9.45
UBPL-800 UBX-800-M30 PL10x175x911 851 145 32 45 100 10.01
UBPL-850 UBX-850-M30 PL10x175x961 901 145 32 45 100 10.56
UBPL-900 UBX-900-M30 PL10x175x1013 953 145 32 45 100 11.13
UBPL-950 UBX-950-M30 PL10x175x1063 1003 145 32 45 100 11.54
UBPL-1000 UBX-1000-M30 PL10x175x1114 1054 145 32 45 100 12.24
GR - 9 190 GR - 8
11.0 Multi Clamp(MC)
10.9-5HOLES
75.8 75.8
Dimension : mm
R0.5
G-32-8 12.7
O.D
53.4
G-32-12 19.1
73
G-32-14 22.3
36.6
21 +1.0
-0.5
G-32-16 25.4
25.4 49.9 75.8
G-32-20 31.8
324 G-32-24 38.1
G-32-32 50.8
Multi Clamp
MC - 32 - 16
Hole Qty
Size of Bush(Fixed)
M tXB
H1
D 1
L1
L
R
Dimension : mm
Type R L H H1 D D 1 M txB L1
PRC-25 35 45 45 30 12 12 M10 4.3 x 31 25
H
H1
GR - 9 191 GR - 10
< Blanked intentionally >
Miscellaneous Items
1.0 Elbow Pipe Lug (LPE)
193
Miscellaneous Items
1.0 Elbow Pipe Lug (LPE)
Permis- Weight
LPE - 50 - 13 Type O.D. sible E d1 a C R1 T (kg)
(mm) Load(kN)
LPE-50-13 60.3 1.7 135 13 3.0 22 17.5 8 0.42
LPE-65-13 73.0 1.7 135 13 3.0 22 17.5 8 0.41
Pin Hole Size(mm)
LPE-80-13 88.9 1.7 135 13 3.0 22 17.5 8 0.41
Pipe Diameter(DN) LPE-80-17 88.9 4.0 140 17 6.0 28 22.5 10 0.66
LPE-100-13 114.3 1.7 135 13 3.0 22 17.5 8 0.42
LPE-100-17 114.3 4.0 140 17 6.0 28 22.5 10 0.66
Symbol of Elbow Pipe Lug
LPE-125-13 141.3 1.7 135 13 3.0 22 17.5 8 0.43
LPE-125-21 141.3 7.0 145 21 6.0 37 30.0 15 1.60
d1 LPE-150-17 168.3 4.0 140 17 6.0 28 22.5 10 0.68
T
LPE-150-25 168.3 12.9 150 25 6.0 40 32.5 18 2.10
R1
LPE-200-17 219.1 4.0 135 17 6.0 28 22.5 10 0.69
C
Permis-
LPH - 13 Type sible d1 A H R1 C G T a Weight
(kg)
Load(kN)
LPH-13 1.7 13 65 115 17.5 22 10 10 3.0 0.49
Pin Hole Size(mm) LPH-17 4.0 17 70 120 22.5 28 10 12 6.0 0.75
LPH-21 7.0 21 120 125 30.0 37 10 15 6.0 1.60
Symbol of Horizontal Pipe Lug LPH-25 12.9 25 130 130 32.5 40 10 20 6.0 2.30
LPH-34 29.3 34 165 140 40.0 50 10 25 8.0 4.10
LPH-41 39.7 41 230 150 50.0 65 10 30 8.0 7.30
A
d1
T
R1
C
a
H
E
O.D.
MI - 1 194
3.0 Trapeze (TR)
Dimension : mm
Lmax Weight
Type E D T H Lmax (kg/m)
T
TR-M12 45 14 8 100 1700 18.7
TR-M16 50 18 10 125 1700 26.4
D
TR-M20 55 22 12 150 1700 35.3
TR-M24 60 26 15 150 1800 35.8
E
H
TR-M48 100 52 30 300 2400 116.6
TR-M56 110 62 40 300 2400 124.5
TR-M64 120 72 45 300 2400 132.0
TR-M68 130 72 45 300 2400 136.1
TR-M72 140 81 50 350 2400 196.4
TR-M80 150 91 60 350 2400 208.4
Type : AS-W
Max. Load : 400kN
*FF : 30mm Field Adjust
Recommended
Pipe size : Up to 50 inch.
Weight : 182.8(kg)
195 MI - 2
Miscellaneous Items
5.0 Stiffener Plate
Material : Carbon Steel
A A
R
R
C
B
B
Dimension : mm
MI - 3 196
Technical Data
1.0 Pipe Data
197
Technical Data
1.0 Pipe Data
Pipe schedule note 1) Wall Weight Pipe schedule note 1) Wall Weight
Size Thick. Weight of Water Size Thick. Weight of Water
a b c (kg/m) a b c (kg/m)
O.D. (mm) (kg/m) O.D. (mm) (kg/m)
TD - 1 198
Continued
199 TD - 2
Technical Data
Continued
pipe schedule note 1) wall weight pipe schedule note 1) wall weight
size thick. weight of water size thick. weight of water
a b c (kg/m) a b c (kg/m)
O.D. (mm) (kg/m) O.D. (mm) (kg/m)
TD - 3 200
2.0 H-Beam Data
Y
ey
t2
H/2
ix
X iy iy X
H
t1 ix
ex
r
t2
B/4
Y
B
201 TD - 4
Technical Data
Continued
TD - 5 202
3.0 Channel Data
Cy
r2
r1
ey
A/2
ex
95
ix
(B-t1)/2 X iy iy X
A
t1 ix
(B-t1)/2
t2
203 TD - 6
Technical Data
4.0 Angle Data
r2
t V U
A/2
ex
ix
A
90
iu iv
X X
r1
iv iu
r2
t
Cx
U iy V
B/2
Cy ey
B
TD - 7 204
5.0 Square Tube Data
t
ly
A
lx
B
Nominal Size Wall Thick. Weight Area Moment Modulus Radius Nominal Size Wall Thick. Weight Area Moment Modulus Radius
(mm x mm) (mm) (Kg/m) (cm )
2 of Inertia of Section of Gyration (mm x mm) (mm) (Kg/m) (cm )
2 of Inertia of Section of Gyration
(cm4) (cm3) (cm) (cm4) (cm3) (cm)
AxB t W As l x= l y Zx=Zy ix=iy AxB t W As lx=ly Zx=Zy ix=iy
1.2 0.70 0.87 0.53 0.52 0.77 3.2 12.00 15.33 376.00 60.10 4.95
20 x 20
1.6 0.87 1.12 0.67 0.65 0.75 4.5 16.60 21.17 506.00 80.90 4.89
1.2 0.87 1.11 1.03 0.82 0.97 5 18.30 23.36 553.00 88.40 4.86
125 x 125
1.6 1.12 1.43 1.27 1.02 0.94 6 21.70 27.63 641.00 103.00 4.82
25 x 25
2.3 1.53 2.25 1.56 1.26 0.84 9 31.10 39.67 865.00 138.00 4.67
3.2 1.98 3.13 1.78 1.43 0.76 12 39.70 50.53 1,030.00 165.00 4.52
1.2 1.06 1.35 1.83 1.22 1.17 4.5 20.10 25.67 896.00 120.00 5.91
1.6 1.38 1.75 2.31 1.54 1.15 150 x 150 6 26.40 33.63 1,150.00 153.00 5.84
30 x 30
2.3 1.73 2.21 2.87 1.91 1.14 9 38.20 48.67 1,580.00 210.00 5.69
3.2 2.48 3.58 4.88 3.25 3.07 4.5 23.70 30.17 1,450.00 166.00 6.93
175 x 175
1.6 1.88 2.39 5.79 2.90 1.56 6 31.10 39.63 1,860.00 213.00 6.86
40 x 40 2.3 2.62 3.33 7.73 3.86 1.52 4.5 27.20 34.67 2,190.00 219.00 7.95
3.2 3.49 4.45 9.72 4.86 1.48 6 46.90 59.79 3,620.00 362.00 7.78
1.6 2.38 3.03 11.70 4.68 1.96 200 x 200 9 52.30 66.67 3,990.00 399.00 7.73
2.3 3.34 4.25 15.90 6.34 1.93 12 67.90 86.53 4,980.00 498.00 7.59
50 x 50 3.2 4.50 5.73 20.40 8.16 1.89 6 45.20 57.63 5,670.00 454.00 9.92
4.5 60.20 7.67 24.90 10.00 1.80 9 66.50 84.67 8,090.00 647.00 9.78
6 7.56 9.63 28.10 11.20 1.71 250 x 250 12 86.80 110.50 10,300.00 820.00 9.63
2.3 4.06 5.17 28.30 9.44 2.34 16 112.40 143.20 12,800.00 1,020.00 9.44
3.2 5.50 7.01 36.90 12.30 2.30 6 54.70 69.63 9,960.00 664.00 12.00
60 x 60
4.5 7.43 9.47 46.50 15.50 2.22 9 80.60 102.70 14,300.00 956.00 11.80
6 9.45 12.03 54.40 18.10 2.13 300 x 300 12 106.00 134.50 18,300.00 1,220.00 11.70
2.3 5.14 6.55 57.10 15.20 2.95 16 138.00 175.10 23,086.00 1,539.00 11.48
3.2 7.01 8.93 75.50 20.10 2.91 19 160.00 204.30 26,200.00 1,750.00 11.30
75 x 75
4.5 9.55 12.17 98.60 26.30 2.85 6 64.10 81.63 16,006.00 915.00 14.00
6 12.30 15.63 118.00 31.50 2.75 9 94.70 120.70 23,200.00 1,320.00 13.90
2.3 5.50 7.01 69.90 17.50 3.16 350 x 350 12 124.00 158.50 29,800.00 1,700.00 13.70
80 x 80 3.2 7.51 9.57 92.70 23.20 3.11 16 163.00 207.20 37,883.00 2,165.00 13.52
4.5 10.30 13.07 122.00 30.40 3.05 19 190.00 242.30 43,400.00 2,480.00 13.40
2.3 6.23 7.93 101.00 22.40 3.56 9 109.00 138.70 35,063.00 1,753.00 15.90
90 x 90 3.2 8.51 10.85 135.00 29.90 3.52 12 143.00 182.50 45,300.00 2,270.00 15.80
4.5 11.70 14.87 178.00 39.50 3.46 14 166.00 211.10 51,780.00 2,589.00 15.66
6 15.10 19.23 220.00 49.00 3.39 400 x 400 16 188.00 239.20 57,942.00 2,897.00 15.57
2.3 6.95 8.85 140.00 27.90 3.97 19 220.00 280.30 66,600.00 3,330.00 15.40
3.2 9.52 12.13 187.00 37.50 3.93 22 251.00 320.20 74,700.00 3,740.00 15.30
4 11.70 14.95 226.00 45.30 3.89 9 122.00 156.70 46,700.00 2,210.00 17.90
100 x 100 4.5 13.10 16.67 249.00 49.90 3.87 12 160.00 206.50 64,200.00 2,850.00 17.70
6 17.00 21.63 311.00 62.30 3.79 450 x 450 16 209.00 271.20 81,800.00 3,640.00 17.50
9 24.10 30.67 408.00 81.60 3.65 19 250.00 318.30 97,100.00 4,310.00 17.50
12 30.20 38.53 471.00 94.30 3.50 22 286.00 364.20 109,000.00 4,850.00 17.30
12 181.00 230.50 90,800.00 3,630.00 19.80
16 238.00 303.20 117,000.00 4,680.00 19.60
500 x 500 19 280.00 356.20 136,000.00 5,420.00 19.50
22 320.00 408.20 153,000.00 6,120.00 19.40
205 TD - 8
Technical Data
6.0 Rectangular Tube Data
ly
A
lx
B
TD - 9 206
Continued
Wall Weight Area Moment of Radius of Radius of
Nominal Size (mmxmm) Thick.(mm) (Kg/m) (cm2) Inertia(cm4) Gyration(cm) Gyration(cm)
AxB t W As Jx Jy Zx Zy ix iy
3.2 10.80 13.73 402.00 137.00 53.60 36.60 5.41 3.16
150 x 75 4.5 14.90 18.92 539.00 183.00 71.90 48.70 5.34 3.11
6 19.34 24.63 948.60 356.10 126.50 95.00 6.21 3.80
3.2 12.00 15.33 488.00 262.00 65.10 52.50 5.64 4.14
4.5 16.60 21.17 658.00 352.00 87.70 70.40 5.58 4.08
150 x 100
6 21.70 27.63 835.00 444.00 111.00 88.80 5.50 4.01
9 31.10 39.67 1130.00 595.00 151.00 119.00 5.33 3.87
4.5 20.10 25.67 1330.00 455.00 133.00 90.90 7.20 4.21
200 x 100 6 26.40 33.63 1700.00 577.00 170.00 115.00 7.12 4.14
9 38.20 48.67 2350.00 782.00 235.00 156.00 6.94 4.01
4.5 23.70 30.17 1760.00 1130.00 176.00 151.00 7.64 6.13
200 x 150 6 31.10 39.63 2270.00 1460.00 227.00 194.00 7.56 6.06
9 45.30 57.67 3170.00 2020.00 317.00 270.00 7.41 5.93
6 35.80 45.63 3890.00 1770.00 311.00 236.00 9.23 6.23
250 x 150 9 52.30 66.67 5480.00 2470.00 438.00 330.00 9.06 6.09
12 67.90 86.53 6850.00 3070.00 548.00 409.00 8.90 5.95
6 45.20 57.63 7370.00 3960.00 491.00 396.00 11.30 8.29
300 x 200 9 66.50 84.67 10500.00 5630.00 702.00 563.00 11.20 8.16
12 86.80 110.50 13400.00 7110.00 890.00 711.00 11.00 8.02
6 54.70 69.63 14800.00 5090.00 739.00 509.00 14.60 8.55
400 x 200 9 80.60 102.70 21300.00 7270.00 1070.00 727.00 14.40 8.42
12 106.00 134.50 27300.00 9230.00 1360.00 923.00 14.20 8.23
207 TD - 10
Technical Data
7.0 Determination of Stanchion/Dummy Pipe Length
Stanchion Size
Nominal
40A 50A 65A 80A 100A 125A 150A 200A 250A 300A 350A 400A 500A
(11/2B) (2B) (21/2B) (3B) (4B) (5B) (6B) (8B) (10B) (12B) (14B) (16B) (20B)
Pipe Size
65A (2 1/2B) 32 44 59
80A (3B) 30 41 51
100A (4B) 34 43 52 67
125A (5B) 37 45 53 66 91
150A (6B) 55 67 89 118
200A (8B) 74 93 116 144
250A (10B) 96 117 140 193
300A (12B) 104 123 144 190 253
350A (14B) 148 169 213 270 345
400A (16B) 155 175 216 267 327 374
450A (18B) 182 220 267 320 359 435
500A (20B) 226 271 319 354 417
550A (22B) 233 275 321 352 409 561
600A (24B) 240 281 324 354 406 536
X
Stanchion Size
Nominal
40A 50A 65A 80A 100A 125A 150A 200A 250A 300A 350A 400A 500A
(11/2B) (2B) (21/2B) (3B) (4B) (5B) (6B) (8B) (10B) (12B) (14B) (16B) (20B)
Pipe Size
65A (2 1/2B) 9 19 32
80A (3B) 4 12 21
100A (4B) 7 15 28
125A (5B) 2 9 20 41
150A (6B) 3 13 32 57
200A (8B) 5 21 41 64
250A (10B) 10 27 47 92
300A (12B) 3 19 36 75 128
350A (14B) 26 44 80 129 193
400A (16B) 19 35 69 112 163 203
450A (18B) 27 59 98 143 176 241
500A (20B) 50 87 128 157 211
550A (22B) 42 77 115 142 190 319
X
TD - 11 208
7.2 Determination of Dummy Pipe Length
Dummy Pipe Length(L) = E - X, where X = take-out length as follows;
Dummy
Nominal Size
40A 50A 65A 80A 100A 125A 150A 200A 250A 300A 350A 400A 500A
(11/2B) (2B) (21/2B) (3B) (4B) (5B) (6B) (8B) (10B) (12B) (14B) (16B) (20B)
Pipe Size
65A (2 1/2B) 30 25 18
80A (3B) 39 35 31
100A (4B) 53 50 47 41
125A (5B) 67 65 63 58 48
150A (6B) 78 74 66 54
200A (8B) 102 96 88 77
250A (10B) 126 120 112 91
300A (12B) 153 148 142 126 100
350A (14B) 165 160 146 124 91
400A (16B) 192 188 176 158 134 113
450A (18B) 215 204 189 170 154 121
500A (20B) 232 219 203 190 164
550A (22B) 260 248 234 223 201 135
600A (24B) 287 276 263 254 235 182
650A (26B) 304 292 284 267 221
X
209 TD - 12
SEONGHWA Industrial Co., Ltd.
Main Office : 34-2, Jinma-daero 2498beon-gil, Ibanseong-myeon, Jinju-si, Gyeongsangnam-do, Rep. of KOREA
Zip Code : 660-871
Seoul Office : 7F, 15, Saemunan-ro 3-gil, Jongno-gu Seoul, Rep. of KOREA
Zip Code : 110-759
Support Factory : 28, Dongbu-ro 1602beon-gil, Jinseong-myeon, Jinju-si, Gyeongsangnam-do, Rep. of KOREA
Zip Code : 660-853
Rev. 3.0
Piping Factory : 29, Jinma-daero 2498beon-gil, Ibanseong-myeon, Jinju-si, Gyeongsangnam-do, Rep. of KOREA
Zip code : 660-871
2014. 08
Pipe Expansion Factory : 60, Hangman 8-ro, Gwangyang-si, Jeollanam-do, Rep. of KOREA
Zip code : 545-020