Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1. Confirm a circumference
1. Click on [Area] ---->[Circumference] ---->[All]
*You need connection of pieces when circumference became not blue.
2. EXPORT Output
1. Click on [Open] ---->[Export] ---->[TIIP/AAMAout]
*[.Pan data] that made in Super Alpha:Plus converts to
[.dxf data] for using other CAD.
-1-
3. Confirm Export setting
#1....Select to AAMA
4. Confirm NG piece
#1....Check at NG piece number
#2....When NG piece exist make sure at Outline Error's number.
#3....Click on [Refer] is Setting to Export folder
-2-
6. Saved DXF file
Indicated as the following when normally saved.
7. Click on [OK]
1. Setup to EXPORT
1.Click on [Open] ---->[EXPORT] ---->[TIIP/AAMAsetup]
-3-
2. Setting the following.
#1 <Output unit>....Choose unit for Output
Choose each definition and set it when hasn't definition, which using [Selection] or [ClickSet].
*The notch made in old version becomes blue.
5. When it has parallel line between Outline and Inside line, there is fear of
that Outline doesn't recognize.(Example/ Stitch line, Fullness line)
-5-
<<How to use IMPORT TIIP/AAMA/DXF>>
IMPORT is to read exchanged DXF file from made in other CAD.
1.Read in IMPORT
1. Click on [Open] ---->[IMPORT] ---->[TIIP/AAMA/DXF]
*Read in DXF file into [Super Alpha:Plus] from other CAD.
-6-
3. The dialog box of DXF IMPORT will display.
#1....The information of opened file
#2, #3....It has distinguish automatically. To need setteing, if there is problem after IMPORT.
#4
Same Size....The data of all size will input to one of size(layer).
Select Size....The data of each size will input to each size(layer) with select.
-7-
<<How to use IMPORT TIIP/AAMAsetup>>
1. Setup to IMPORT
1.Click on [Open] ---->[IMPORT] ---->[Setup]
#4 <Cutline in Peices>
Reglar...IMPORT to as regular lines(White line)
Cutline....IMPORT to as cut lines(Purple line)
#5 <Piece Information>
If marked On (*Choose on need at the following.)
Character Heigh....Setting to Size of Character
Add Title Character....It will display the following character.
:Design Name
:Piece Name
:Size
:Fabric
:Unit
If marked OFF....It won't display Characters when IMPORT.
-8-
3. Click on [OK] after Confirm
<<Attention to IMPORT>>
1. When save imported pattern, you need delete green lines before save.
Click on [Open] ---->[IMPORT] ---->[DeleteCheck]
*Make sure of shape of the pattern before to move elements because green line can't move.
-9-