Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Description
FX 120 is a universal 2 component styrene
free injection system ideal for anchoring
threaded bars and sockets into concrete
and most common building materials
including hollow masonry.
Benefits:
1. Good performance, high quality,
universal, fast cure chemical mortar
for use with standard threaded bars
and internally threaded sockets.
2. 300ml foil pack system fitting a
standard mastic dispenser gun. Easy
to extrude / user friendly delivery
system.
3. Styrene & solvent free (odourless)
4. Flexible embedment depths
5. Suitable for concrete, masonry (hollow
& solid), stonework.
6. Suitable for overhead application
7. Reduced drilling diameters ie M20 only
requires a 22 mm hole and M24 only
a 26mm hole making it an economical
injection system.
Applications
Canopies
Masonry support
Fixing into tarmac
Balustrading Installation Data
Handrails Applies to solid substrates
Curtain walling
Drilling Drilling Minimum Recommended N of fixings
All other applications of wooden and diameter in diameter in embedment torque per cartridge
metal construction Anchor
substrate the fixing depth
Size
(mm) plate (mm) (N/m)
Colour (mm)
The cured resin has a grey colour similar M8 10 9 80 10 80
to that of the concrete. M10 12 11 90 20 54
On request the FX120 is also available in
M12 14 13 110 40 35
white and stone colours.
M16 18 17 125 80 21
M20 22 22 170 150 11
M24 26 26 210 200 7
Page of 4
Tremco FX 120 Tremco illbruck s.r.o.
valsk 737/34, 100 00 Praha 10
tel.: +420-296 565 333
8. Apply fixture,
assemble washer
& nut and apply
the torque
Page of 4
Tremco FX 120 Tremco illbruck s.r.o.
valsk 737/34, 100 00 Praha 10
tel.: +420-296 565 333
Performance Data
Threaded bars into concrete
Required
Required
close Min
anchor Characteristic Recommended
Stud Hole Hole edge concrete
spacing load in C20/25 load in C20/25
diameter diameter depth distance member
to achieve concrete concrete
to achieve thickness
Nrec
Nrec
ho
d (mm) do (mm) Ccr (mm) Scr (mm) hmin (mm) NRK (kN) Nrec (kN)
(mm)
8 10 80 80 160 110 25.6 8.5
10 12 90 90 180 120 31.5 10.5
12 14 110 110 220 140 43.3 14.4
16 18 125 125 250 165 49.7 16.6
20 22 170 170 340 220 86.6 28.9
24 26 210 210 420 270 94.0 31.3
hef = Std Anchor Spacing Reduction Factors hef = Std Edge Distance Reduction Factors
M8 M10 M12 M16 M20 M24 M8 M10 M12 M16 M20 M24
40 0.60 NOT PERMISSIBLE 40 0.64 NOT PERMISSIBLE
45 0.60 0.60 45 0.64 0.64
50 0.65 0.60 50 0.70 0.64
55 0.65 0.65 0.60 55 0.70 0.70 0.64
60 0.65 0.65 0.60 60 0.77 0.70 0.64
63 0.65 0.65 0.60 0.60 63 0.77 0.77 0.64 0.64
70 0.70 0.65 0.65 0.60 70 0.85 0.77 0.70 0.64
75 0.70 0.70 0.65 0.65 75 0.92 0.85 0.70 0.70
80 0.75 0.70 0.65 0.65 80 0.85 0.77 0.70
85 0.75 0.70 0.65 0.65 0.60 85 0.92 0.77 0.70 0.64
Edge Distance (mm)
120 0.85 0.80 0.75 0.70 0.65 0.60 120 0.92 0.77 0.64
130 0.90 0.85 0.75 0.75 0.65 0.65 125 0.77 0.70
140 0.90 0.85 0.80 0.75 0.70 0.65 130 0.77 0.70
150 0.95 0.90 0.80 0.80 0.70 0.65 140 0.85 0.70
160 0.90 0.85 0.80 0.70 0.65 150 0.85 0.77
170 0.95 0.85 0.80 0.75 0.70 160 0.92 0.77
180 0.90 0.85 0.75 0.70 170 NO REDUCTION 0.85
190 0.90 0.85 0.75 0.70 180 0.85
200 0.95 0.90 0.75 0.70 190 0.92
220 0.90 0.80 0.75 200 0.92
240 0.95 0.85 0.75 210
250 0.85 0.80
260 0.85 0.80
280 0.90 0.80
300 0.90 0.85
320 0.95 0.85
340 NO REDUCTION 0.90
360 0.90
380 0.95
400 0.95
420
Page of 4
Tremco FX 120 Tremco illbruck s.r.o.
valsk 737/34, 100 00 Praha 10
tel.: +420-296 565 333
Performance Data
Threaded bars into masonry
M8 M10 M12
Recommended Loads Nrec (kN)
Accessories
Available accessories are displayed at the
bottom of the page.
Page of 4