Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
00
MIDAS IT Co., Ltd.
2D Slope Stability Analysis using SAM
Overview
1. SAM is used for analyzing the slope
including weak layer.
01 Material Properties
MIDAS IT Co., Ltd.
Attribute)
01 Material Properties
MIDAS IT Co., Ltd.
Material
ID 1 2
Name Weathered Soil Weak Soil
Model Type Mohr-Coulomb Mohr-Coulomb
Modulus of Elasticity(E) [kN/m2] 80000 30000
Poissons Ratio() 0.3 0.3
Unit Weight(Y) [kN/m3] 20 15
Cohesion(c) [kN/m2] 10 5
Friction Angle() 30 25
K0 0.5 0.5
02
MIDAS IT Co., Ltd.
File > Open
Procedure
1
03
MIDAS IT Co., Ltd.
Mesh > Auto Mesh > Planar Area
2
Procedure
1. Main Menu > Mesh > Auto
Mesh > Planar Area
Soil 6
2
8. Click [OK]
9. Click [Apply]
5
9
8
03
MIDAS IT Co., Ltd.
Mesh > Auto Mesh > Planar Area
Procedure
1
1. Select the edges of the Weak
Soil as shown
4. Click [Apply]
03
MIDAS IT Co., Ltd.
Model > Property > Attribute
Procedure
1. After generating the Mesh, verify
that 3 Mesh Sets have been defined.
Verify that Default Mesh set is
included
function
04
MIDAS IT Co., Ltd.
Model > Boundary > Slip Surface > Circular Surface
1
Procedure
1. Main Menu > Model > Boundary > Slip 2
04
MIDAS IT Co., Ltd.
Model > Boundary > Slip Surface > Circular Surface
Procedure 1
3
3. After adjusting Circular Slip
Surface settings, the color labels
of the Grid Ranges or Radius 3
04
MIDAS IT Co., Ltd.
Model > Boundary > Slip Surface >Circular Surface
Procedure
1. In the Analysis Works Tree,
From Boundary > Circular
1
Surfaces right click on the mouse
and select Check..
05
MIDAS IT Co., Ltd.
Model > Boundary > Slip Surface > Polygonal Surface
1
Procedure 6
5. Click [Apply]
4 5
6. Similarly repeat the procedure for
Polygonal Surfaces 2, 3
05
MIDAS IT Co., Ltd.
Model > Boundary > Slip Surface > Polygonal Surface
Procedure 1
06
MIDAS IT Co., Ltd.
Model > Boundary > Ground Supports
Procedure
1. Model > Boundary > Ground 1
Supports
2
4. Click [OK]
07
MIDAS IT Co., Ltd.
Model > Load > Self Weight
Procedure
1. Main Menu >Model > Load > Self 1
Weight 2
4. Click [OK]
Self Weight
Y(-)
08
MIDAS IT Co., Ltd.
Analysis > Analysis Case
Procedure 1
2
1. Main Menu > Analysis > Analysis
Case
2. Click [Add]
3
3. Name > SAM-C, Analysis
Type > Slope Stability(SAM)
6. Click [OK]
08
MIDAS IT Co., Ltd.
Analysis > Analysis Case
Procedure 1
1. Click [Add]
2
3. Analysis Model > Initial Element,
Initial Boundary > Select Empty
5. Click [OK]
08
MIDAS IT Co., Ltd.
Analysis > Analysis Case
Procedure 1
1. Click [Add]
5. Click [OK]
09
MIDAS IT Co., Ltd.
Analysis > Solve
Procedure 1
3. Click [OK]
10
MIDAS IT Co., Ltd.
Result > Slope Stability(SAM) Result
1
Procedure
1. Main Menu > Result > Slope 2
Stability(SAM) Result
3
2. In the Slope Stability FOS Result
Dialog box, select the SAM-C
from the Analysis Case
11
MIDAS IT Co., Ltd.
SAM-C > Displacement > DX(V), SAM-C > 2D Element Strains > HO-Soil Max Shear
Procedure
X-Displacement
1. SAM method uses nonlinear FEM
analysis methods including
material nonlinear characteristic of
ground. Not only factor of safety
and critical cross section but also
general nonlinear analysis results
such as stress, displacement,
maximum shear deformation of
ground are attainable.
12
MIDAS IT Co., Ltd.
Results > Slope Stability(SAM) Result
1
Procedure
2
1. Main Menu > Result > Slope
Stability(SAM) Result
3
2. In the Slope Stability FOS Result
Dialog box, set the Analysis Case
as SAM-P.
13
MIDAS IT Co., Ltd.
Post Works Tree > SRM > 2D Element Strains > HO-Soil Max Shear
1
Procedure
1. Post Works Tree > SRM001 >
SRM (1)