Sei sulla pagina 1di 1

Pump-In Sub

The Pump-In Sub (PIS) is normally positioned below the wireline valve and above the wellhead. Its main function is to allow
well control by pumping fluid below a closed wireline valve.

The PIS has quick unions top and bottom, and a WECO (Hammer Union)
type side connection. Pump-in subs are normally supplied with a blind plug
& nut on the WECO port. A suitable valve is needed to operate the PIS,
replacing the blind plug. Pump-in subs can also be used for fluid sampling or
inhibitor injection. Specially designed pump-in subs, with different top and bottom
unions are used as wellhead adapter x-overs.

For service companies that


require positive isolation Back-up rings & o-rings L-875370 x 2 off &
between the well bore L-870280 x 2 off
and WECO type piping Flange Body L-9701018564
connections whenever the
Stud Bolt L-806820 x 16 off
Pump-In Sub is placed
below the wireline valve, Adapter Flange

Section 3 - WPCE Wireline Pressure Control


Elmar has developed L-976851

Typical Elmar standard 3 conversion kits to adapt Viton Seal


Pump-in Sub the existing Elmar standard L-874130
Pump-In Subs to API
flanged valves. A flanged
Gate or Plug valve can
Nut L-801180 x 16 off
thus be placed between the
Pump-In Sub body and the Plug/Gate Valve with
WECO for any version except 2-1/16 6BX152 10K flanges
the integral one. Conversion
kit part number L-9701019077
API 2 1/16 10,000 lb BX152 connection
allowing use of API plug/gate valve if required
Elmar Standard Pump-In Sub
Part Number I.D. Working Pressure Service Quick Union Connection Side Outlet 181
L-972052 3 10,000 psi H 2S 4 3/4-4x2thd (3.750) Elmar 2 1502

L-977282 3 10,000 psi H 2S 6 5/16-4thd (4.375) Bowen 2 1502

L-980851 3 15,000 psi H 2S 7-5thd (4.375) Bowen 2 2202

L-972224 4 1/16 10,000 psi H 2S 6 1/8-4x2thd (4.750) Elmar 2 1502

L-9701014556 5 1/8 10,000 psi H2S 7 7/8-4x2thd (6.125) Elmar 2 1502

L-980837 6 3/8 10,000 psi H 2S 11 1/2-4thd (8.250) Otis 2 1502

Note: Additional sizes available on request.

FLANGED PUMP-IN SUB


Part Number I.D. Working Pressure Service Quick Union Connection Side Outlet

L-9701010046 3 10,000 psi H 2S 4 3/4-4x2thd (3.750) Elmar 2 1502

Typical Elmar 3 Flanged Pump-in Sub L-9701016296 3 15,000 psi H 2S 7-5thd (4.375) Bowen 2 2202

L-9701016295 4 1/16 10,000 psi H2S 6 1/8-4x2thd (4.750) Elmar 2 1502

L-9701029607 5 1/8 10,000 psi H2S 7 7/8-4x2thd (6.125) Elmar 2 1502

Note: Additional sizes available on request.

INTEGRAL PUMP-IN SUB


Part Number I.D. Working Pressure Service Quick Union Connection Side Outlet

L-9701007262 3 10,000 psi H 2S 4 3/4-4x2thd (3.750) Elmar 2 1502

L-9701013336 5 1/8 10,000 psi H2S 7 7/8-4x2thd (6.125) Elmar 2 1502

Note: Additional sizes available on request.

ACCESSORIES
Part Number Description Working Pressure Service Connection

L-840805 Plug Valve 10,000 psi H 2S 2 1502

L-840605 Plug Valve 15,000 psi H 2S 2 2202

Note: Additional sizes available on request.


For Seal Kit part numbers add K to the item part number e.g. L-972052K.

Typical Elmar 3 Integral Pump-in Sub

Elmar Product Line


2014 National Oilwell Varco www.nov.com/Elmar

Potrebbero piacerti anche