Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
www.ezzogenics.com
SOLFIRE WATCH THE WORLD COME ALIVE AT NIGHT
Making the world a better place Improve the efficiency of Landscape Lighting Roadway Lamps
Change begins by taking small steps. By using SOLFIRE solar lights, you will reduce your environmental impact and
help make the world a better place. The LEDs are 100% recyclable while the solar panels use an electric double layer
your road and Gardens
Wooden Decks
Road center
Road sides
capacitor (EDLC) to store the solar converted electricity, which eliminates waste from traditional batteries. In addition, landscape lighting Fences
Parks
Crossroad
Bike paths
each product is ROHS certified. Every component in SOLFIRE is either Made in Korea or Made in Japan.
SOLFIRE brings to life a series of LED solar lights that can Playgrounds Building entrance
be used in a wide range of road and landscape Bridges Vehicle toll bar
applications. Seaside Barricades
Stairs Wooden Deck
Walls Bollard
Swimming Pools Walk way
Walkways Parking lot
Fountains
Sports Facilities
Bollards
Squares
PRODUCT
01
SLL-122R Application
Made in Korea
Size Outer: 129 x 129 x 135mm (H) / Inner: 122 x 122 x 30mm (H)
Voltage 4.0V
Weight 500g
Red
Green Compressive Strength 10.27KN (1.048kg)
Blue Option Pole
Yellow
White Lighting Type Continue
02
Key Features:
SLL-122S Application
A Durable housing
Made from Japanese resin polycarbonate with UV coating
Voltage 4.0V
Weight 500g
Option Pole
SOLAR SOLAR
LANDSCAPE LANDSCAPE
LIGHTING LIGHTING
Size 8" x 8" x 2.6" [200 x 200 x 63mm (H)] Size 4" x 8" x 2.4" [100 x 200 x 61mm (H)]
Upper Part Poly Carbonate + UV Coating Upper Part Poly Carbonate + UV Coating
Material of Body Origin: Korea Material of Body Origin: Korea
Lower Part Poly Carbonate Housing Lower Part Poly Carbonate Housing
Size Chip Type 3.5 x 2.8mm (20mA) Size Chip Type 3.5 x 2.8mm (20mA)
LED Quantity High Efficiency LED x 4 pcs Origin: Nichia (Japan) LED Quantity High Efficiency LED x 4 pcs Origin: Nichia (Japan)
Voltage R,Y (2.5V) G,B,W (4.0V) Voltage R,Y (2.5V) G,B,W (4.0V)
Charging P-EDLC 2.3V 120F x 5pcs Origin: Korea Charging P-EDLC 2.3V 120F x 4pcs Origin: Korea
Compressive Strength 178.23KN (18.186 kg) Compressive Strength 36.18 KN (3.692 kg)
Lighting Type Continue R.G.B Color Convert Lighting Type Continue R.G.B Color Convert
Application Walkway, Fountain, Swimming Pool, Park, Wall, Stairs, Square Application Walkway, Fountain, Swimming Pool, Park, Wall, Stairs, Square
04 06
STL-0808 Application
STL-0404 Application
[B Type]
SOLAR SOLAR
LANDSCAPE LANDSCAPE
LIGHTING LIGHTING
Size 8" x 8" x 2.6" [200 x 200 x 63mm (H)] Size 4" x 4" x 2.4" [100 x 100 x 60mm (H)]
Upper Part Poly Carbonate + UV Coating Upper Part Poly Carbonate + UV Coating
Material of Body Origin: Korea Material of Body Origin: Korea
Lower Part Poly Carbonate Housing Lower Part Poly Carbonate Housing
LED Quantity 4 pcs Origin: Nichia (Japan) LED Quantity High Efficiency LED x 4 pcs Origin: Nichia (Japan)
Voltage R,Y (2.5V) G,B,W (4.0V) Voltage R,Y (2.5V) G,B,W (4.0V)
Charging P-EDLC 2.3V 120F x 4 pcs Origin: Korea Charging P-EDLC 2.3V 120F x 2 pcs Origin: Korea
Lighting Type Continue R.G.B Color Convert Lighting Type Continue R.G.B Color Convert
Application Walkway, Fountain, Swimming Pool, Park, Wall, Stairs, Square Application Walkway, Fountain, Swimming Pool, Park, Wall, Stairs, Square
07 09
STL-100R Application
STL-50R Application
SOLAR SOLAR
LANDSCAPE LANDSCAPE
LIGHTING LIGHTING
LED Quantity High Efficiency LED x 4 pcs Origin: Nichia (Japan) LED Quantity 1 pc Origin: Nichia (Japan)
Charging P-EDLC 2.3V 120F x 2 pcs Origin: Korea Charging P-EDLC 2.3V 120F x 3 pcs Origin: Korea
Option Logo Design SUS Case Molded Option SUS Case Molded
Lighting Type Continue R.G.B Color Convert Lighting Type Continue Blinking: a) 1 Time / 1 Second b) 1 Time / 3 Seconds
Application Walkway, Fountain, Swimming Pool, Park, Wall, Stairs, Bollard, Square Application Walkway, Fountain, Swimming Pool, Park, Wall, Stairs, Square
08 10
STL-80R Application
STL-RS Application
SOLAR SOLAR
LANDSCAPE ROADWAY
LIGHTING LAMP
Upper Part Poly Carbonate Origin: Korea Upper Part Poly Carbonate Housing
Material of Body Material of Body Origin: Korea
Lower Part Poly Carbonate Housing Origin: Japan Lower Part Die Casting
LED Quantity 5 pcs Origin: Nichia (Japan) LED Quantity 3pcs (One Side) / 6pcs (Both Sides) Origin: Nichia (Japan)
Charging P-EDLC 2.3V 120F x 1 pc Origin: Korea Charging P-EDLC 2.3V 120F x 2 pcs Origin: Korea
Compressive Strength 43.50 KN (4.438 kg) Compressive Strength 393.91 KN (40.195 kg)
Option SUS Case Molded Option Lighting on One Side Lighting on Both Side
Lighting Type Continue Blinking: a) 1 Time / 1 Second b) 1 Time / 3 Seconds Lighting Type Continue Blinking: a) 1 Time / 1 Second b) 3 Times / 1 Second
Application Walkway, Fountain, Swimming Pool, Park, Wall, Stairs, Square Application Road-sides, Bollard, Warning Lamp, Vehicles Toll Bar, Barricades
COMPOSITION OF SOLAR LED LIGHTING
11
STL-RSA Application
B
Controller
SOLAR
ROADWAY
LAMP 1 4
Size 5 (20mA)
C
LED Quantity 2 pcs (One Side) / 4 pcs (Both Sides) Origin: Nichia (Japan) Super Capacitor
(EDLC)
Voltage 3.0V
Weight 400g
Lighting Type Continue Blinking: a) 1 Time / 1 Second b) 3 Times / 1 Second B Controller (Circuit Diagram)
Controls the flow of electric current that flow from the Solar Cell to EDLC, and EDLC to DC load
Application Road-sides, Wooden Deck, Bike Paths, Walkway, Warning Lamp
C Super-Capacity (EDLC):
Saves the electric energy (DC) generated from the Solar Cell and supplies the electric energy required
12
for operation of DC load
STL-RC Application
SOLAR
ROADWAY
LAMP STAINLESS STEEL CASE SIZE
Size 148 x 53mm (H)
LED Quantity 3 pcs (One Side) / 6 pcs (Both Sides) Origin: Nichia (Japan)
Voltage 3.0V
Option Lighting on One Side Lighting on Both Side Upper Part 227 x 227mm 120mm 92mm 62mm
Lighting Type Continue Blinking: a) 1 Time / 1 Second b) 3 Times / 1 Second Lower Part 200 x 200 x 63mm (H) 102 x 55mm (H) 81 x 46mm (H) 52 x 31mm (H)
Application Road-Center, Bike Paths, Entrance to Building, Walk Way, Parking Lot, Crossroad, Warning Lamp Edge of Top Case 13.5mm (4 sides) 9mm (R) 5.5mm (R) 5mm (R)
INSTALLATION STL-0808L, 0408, 0404
1 Do not install product indoors. Stay away from 1 Flatten the ground where the product is to be 5 Harden the ground using compacting stone.
constantly shaded areas. installed and keep it clean. 5 6 6 Fill the square evenly with silicone in 10mm
thickness.
2 Product works in sunlight. Install the product in such 2 Use non-acetic-silicone or urethane for finishing
a way that it is exposed to good sunlight. Apply silicone / urethane on every area to be in 7 Place the product over the silicone while keeping it
contact with the Product (base and sides) to level with the ground.
finish.
Install a safe guard around the Product upon 8 After about 48 hours *silicone is about half dry),
installation to protect the Product from passersby apply silicone around the four sides of the product
7 2
8
or animals until silicone or urethane is dry in 10mm width to finish.
Model Installation Area Required (L x D x H) (72 hours).
STL-0808 220 x 220 x 70mm (H)
3 Caution: Do not use cement to finish. Cement
STL-0408 120 x 220 x 70mm (H) causes damage to the product as it induces
chemical reaction and exerts excessive pressure to
STL-0404 120 x120 x 70mm (H)
the product. The Product Warranty will not apply to
STL-100R 120 x 70mm (H) defects caused by cement finish.
STL-80R 100 x 60mm (H)
4 If any additional SUS case is attached to the STL-100R. 80R, 50R
STL-50R 60 x 45mm (H) Product's housing, you may use cement to finish
instead of silicone / urethane on the base and
STL-RSA 115 x 90 x 45mm (H)
sides. By doing so, work efficiency may be 1 2 1 Place the product at the desired spot, mark around
STL-RC 60 x 160mm (H) improved. Models compatible with auxiliary SUS the product with a pen, and put away the product
case: STL-0808. STL-100R, STL-80R, STL-50R. from the marked spot.
1 2 1 Erect and fix a support onto which the product is 4 Flatten the ground where the product is to be
installed. installed, and keep it clean.
2 Place the product on top of the support. 5 Fill the space with silicone evenly in 10mm
thickness.
3 Fix the products with bolts on the 4 lower sides of
the product. 5 6 6 Place the product over the silicone while keeping it
level with the ground.
4 It features the product being completely installed
3 4 on the support. 7 After about 48 hours (silicone is about half dry),
apply silicone around the product in 100 mm width
to finish.
7
STL-RSA
REFERENCE
1 2 1 Cut out a hole on the desired spot to install the
product. PROJECTS
2 The hole is ready.
STL-RC
9 10
SLL-122S Go Heong Beach, South Korea SLL-122S Go Heong Gun, South Korea
REFERENCE REFERENCE
PROJECTS PROJECTS
5 6 9 10
STL-0808 (A-Type) Jeonju City, South Korea STL-0808 (B-Type) Sung Nam City, South Korea STL-RS Anyang City, South Korea STL-RSA Oncheoncheon, South Korea
7 8 11 12
STL-100R Namdaemun-Ro, Seoul, South Korea STL-50R Yongin City, South Korea STL-RC Gyeonggi-Do, South Korea STL-RC Gyeonggi-Do, South Korea
Ezzogenics Pte Ltd (UEN: 201208665Z)
59 Ubi Avenue 1, #06-16, Bizlink Centre,
Singapore 408938
Tel: +65 6749 6032 Fax: +65 6749 6032
Email: sales@ezzogenics.com