Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
*The source and target devices can be either standard or BCDs,provided they
are of the emulation(FBA to FBA,CKD to CKD).
TF/CLONE OPERATIONS
Create-Create relationship between STD and clone.The create action defines
the copy session requirements and sets the track protection bitmap on the
SRC device to detect which tracks are being accessed by the target host or
written to by the source host.The target device is made not ready to its
host and placed on hold status for copy session activity.
Split-You can use the symclone split comand to split a clone device pair
that is in the restored state.
=======================
TF/clone options with creation
Full device copy-Full copy in the bg starts after activation.Default with
SE7 and above.
Differential-Used with full copy or precopy.Full copy by default.Required
if recreate clone session is planned.required if incremental restore is
planned.
CopyonAccess(nocopy)-Only accessed tracks are copied to clone target after
activation of the clone session.
Precopy-Fullcopy in bg starts after session creation.
Copyonwrite-Changes the behaviour of copyonaccess to only copy when writes
occur to the source or the target device.The option can be enabled by
setting the parameter in options file. Once copyonwrite is activated all
reads will be handled from source device and writes to the source device ir
target device during the active cioy session will result in the data being
copied to the target device.
Recreate before copied:-No need to wait for a clone copy to be
complete,before activating a new PIT with recreate. Symclone recreate or
establist is now permitted while the session is in copyinprog mode.Recreate
is a differential copy.
or use below format to create clone sessions. Refer various options(nocopy,precopy,etc) explained
above.
symclone -g TestDg create DEV001 sym ld DEV002
symclone -g TestDg create DEV001 sym ld DEV002 -nocopy
symclone -g TestDg create DEV001 sym ld DEV002 -precopy