Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Airless spray equipment is recommended and should Brushing or rolling adds about 20 %
match these guidelines: to drying time, compared to spraying.
Drying are doubled at 5 C or at over
Data
75 % relative humidity.
Tip size 1925 Final drying time before topsealing is a
Fan width 2040 minimum of 16 hours.
These figures are based on constant
Operating Pressure 25003000 psi
conditions, fluctuations up or down will
Hose diameter 10 mm (3/8) internal diameter
give variations to the drying time. If
Hose length max. 60 metres overnight condensation causes wetting
a further full drying period should be
Brush/Roller For brush application use a laying on allowed.
Application: technique to avoid heavy brush marking.
Maximum wet film per coat when using
a brush or roller is 1.0 mm. A short piled
roller will produce a light textured finish.
10 C 20 C 30 C
RH Spray Still Air Air Flow Still Air Air Flow Still Air Air Flow
Hrs Hrs Hrs Hrs Hrs Hrs
Thin 4 1/2 2 1/4 3 3/4 1 1/2 2 1/4 1 1/2
30 % Medium 6 1/4 3 3/4 5 1/4 3 4 1/2 2 1/4
Thick 9 4 1/2 6 3 3/4 6 3
Thin 5 3 4 1/2 2 3 1 1/2
50 % Medium 9 4 1/2 6 1/4 4 6 3
Thick 12 6 9 5 1 1/2 3 1/2
Thin 11 6 9 5 6 3
70 % Medium 15 9 15 7 12 5
Thick 18 12 18 9 15 6
Application of topseal
Once DFTs have been achieved as specified,
Renitherm TC topseal can be applied. Make sure
that Renitherm PMA 600 H is completely dry before
applying topseal. AUDAX fully complies with the
requirements of EN ISO 9001
standard. This certification is
Maintenance one more proof for Renitherms
Damaged areas should be abraded back to a sound quality, reliability and safety.
RM PRO
HE
TE
RENIT
CTS
AUDAX-Keck GmbH
Weiherstrae 10 75365 Calw
G
GR
EN D
B UIL www.audax.de