Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Duty - Watts
Code Fan Coil at SC1 (10KTD)
H110 EVB-M1 240
H111 EVB-M2 320
H112 EVB-M3 380
Defrost Kits
H118 Heater Kit To suit M1,M2,C1
H119 Heater Kit To suit M3,C2
Standard Conditions:
Condition Air Inlet Temperature Evaporating Temperature Standard TD
SC 1 +10C 0C 10K
The above duties will need correcting to the actual temperature difference.
The duties indicated have been calculated using R404A. For other refrigerants please
contact us for the relevant correction factor.
Specification:
Air Vol. Defrost Dimensions (mm) Connections
Model Fans cu/m hr Watts L W H Liq. Suct. Drain
EVB M1 1 65 210 370 80 440 5/16 5/16 16mm
EVB M2 1 95 210 370 80 440 5/16 5/16 16mm
EVB M3 1 105 290 490 80 440 5/16 5/16 16mm
EVB C1 2 65 210 370 89 440 5/16 5/16 16mm
EVB C2 2 110 290 490 89 440 5/16 5/16 16mm
www.fsw.uk.com 65
Friga-Bohn MF / MR Evaporators
Application:
Model Air Inlet Temperature Fin Spacing Defrost
MF +10C/+2C 4.23 mm (6 fpi) None
MFE -10C/-25C 4.23 mm (6 fpi) Electric
MR**R +10C/+2C 4.23 mm (6 fpi) None
MRE**E -10C/-25C 4.23 mm (6 fpi) Electric
Standard Conditions:
Condition Air Inlet Temperature Evaporating Temperature Standard TD
SC 2 0C -8C 8K
SC 3 -18C -25C 7K
SC 4 -25C -31C 6K
The above duties will need correcting to the actual temperature difference.
The duties indicated have been calculated using R404A. For other refrigerants please
contact us for the relevant correction factor.
Specification:
Air Vol. Defrost Dimensions (mm) Connections
Model cu.m/hr Fans Watts L W D Liq Suct. Drain
MF 1 270 1 140 399 429 150 5/16 5/16 1/2
MF 2 250 1 160 399 429 150 5/16 5/16 1/2
MF 3 460 2 330 599 429 150 5/16 5/16 1/2
MF 4 430 2 330 599 429 150 5/16 5/16 1/2
MR 75 290 1 400 514 438 209 3/8 3/8 1
MR 110 650 2 440 784 438 209 3/8 3/8 1
MR 135 580 2 730 784 438 209 3/8 3/8 1
MR 210 870 3 1200 1174 438 209 1/2 5/8 1
MR 270 1160 4 1600 1504 438 209 1/2 3/4 1
www.fsw.uk.com 67
Friga-Bohn SD Evaporators
SD Evaporators come with White ABS cases for easy cleaning and have no sharp corners.
Application:
Model Air Inlet Temperature Fin Spacing Defrost
SD***R +10C/+2C 4.23 mm (6 fpi) None
SD***R+ECK +10C/-5C 4.23 mm (6 fpi) Electric
Standard Conditions:
Condition Air Inlet Temperature Evaporating Temperature Standard TD
SC 2 0C -8C 8K
The above duties will need correcting to the actual temperature difference.
The duties indicated have been calculated using R404A. For other refrigerants please contact
us for the relevant correction factor.
Specification:
Air Vol. Air Defrost Dimensions (mm) Connections
Model cu.m/hr Fans Throw Watts * L W H Liq Suct. Drain
SD024R 1530 1 13 1000 710 410 458 1/2 1/2 1
SD030R 1470 1 13 1000 710 410 458 1/2 1/2 1
SD038R 1330 1 12 1000 710 410 458 1/2 1/2 1
SD052R 1570 1 14 1600 940 410 460 1/2 5/8 1
SD062R 2990 2 13 2160 1170 410 463 1/2 5/8 1
SD082R 3260 2 15 3280 1630 410 468 5/8 7/8 1
SD104R 3200 2 14 3280 1630 410 468 5/8 7/8 1
SD118R 4090 3 13 3280 1630 410 468 5/8 7/8 1
SD148R 4560 3 14 4400 2090 410 473 5/8 1-1/8 1
SD158R 5470 4 13 4400 2090 410 473 5/8 1-1/8 1
www.fsw.uk.com 69
Friga Bohn MUC Evaporators
MUC Evaporators are suitable for chilling or low temperature storage applications.
There are twenty-four models with capacities ranging from 1.7 kW through to 13.7 kW.
The cases are made of White Enamelled Steel.
The above duties will need correcting to the actual temperature difference.
The duties indicated have been calculated using R404A. For other refrigerants please contact
us for the relevant correction factor.
Specification:
Air Vol. Air Defrost Dimensions (mm) Connections
Model cu.m/hr Fans Throw Watts * L W H Liq Suct.
MUC145R 1246 1 12 420 560 400 357 1/2 1/2
MUC200R 1239 1 12 630 560 464 357 1/2 1/2
MUC285R 2336 2 12 780 966 400 357 1/2 5/8
MUC320R 2076 2 12 960 966 400 357 1/2 5/8
MUC420R 2562 2 12 1320 1220 400 357 1/2 3/4
MUC520R 3252 3 12 1560 1220 464 357 1/2 3/4
MUC620R 3696 3 12 1860 1650 400 357 1/2 7/8
MUC640R 3264 3 12 2550 1990 400 365 1/2 7/8
MUC660R 3486 3 12 3150 2340 400 365 7/8 7/8
MUC670R 4168 4 12 3150 2340 400 365 7/8 7/8
MUC780R 7095 2 28 2340 1650 495 482 7/8 1-1/8
MUC960R 7895 2 45 3480 1650 590 482 1-1/8 1-3/8
MUC140L 1217 1 12 420 560 400 357 1/2 1/2
MUC195L 1239 1 12 630 560 464 357 1/2 1/2
MUC280L 2267 2 12 780 966 400 357 1/2 5/8
MUC315L 2075 2 12 960 966 400 357 1/2 5/8
MUC415L 2561 2 12 1320 1220 400 357 1/2 3/4
MUC515L 3250 3 12 1560 1220 464 357 1/2 3/4
MUC615L 3694 3 12 1860 1650 400 357 1/2 7/8
MUC635L 3435 3 12 2550 1990 400 365 1/2 7/8
MUC655L 3624 3 12 3150 2340 400 365 7/8 7/8
MUC665L 4436 4 12 3150 2340 400 365 7/8 7/8
MUC775L 7093 2 28 2340 1650 495 482 7/8 1-1/8
MUC955L 7893 2 45 3480 1650 590 482 1-1/8 1-3/8
Application:
Model Air Inlet Temperature Fin Spacing Defrost
MUC***R +10C/+2C 4.23 mm (6 fpi) None
MUC***R+E1K +10C/-5C 4.23 mm (6 fpi) Electric
MUC***L +10C/+2C 6.35 mm (4 fpi) None
MUC***L+E1K +10C/-5C 6.35 mm (4 fpi) Electric
Standard Conditions:
Condition Air Inlet Temperature Evaporating Temperature Standard TD
SC 2 0C -8C 8K
The above duties will need correcting to the actual temperature difference.
The duties indicated have been calculated using R404A.
For other refrigerants please contact us for the relevant correction factor.
www.fsw.uk.com 71
Friga Bohn LUC Evaporators
Application:
Model Air Inlet Temperature Fin Spacing Defrost
LUC***E -10C/-25C 4.23 mm (6 fpi) Heavy Duty Electric
LUC***C -10C/-25C 6.35 mm (4 fpi) Heavy Duty Electric
Standard Conditions:
Condition Air Inlet Temperature Evaporating Temperature Standard TD
SC 3 -18C -25C 7K
SC 4 -25C -31C 6K
The above duties will need correcting to the actual temperature difference.
The duties indicated have been calculated using R404A.
For other refrigerants please contact us for the relevant correction factor.
Specification:
Air Vol. Air Defrost Dimensions (mm) Connections
Model cu.m/hr Fans Throw Watts * L W H Liq Suct.
LUC155E 1246 1 12 1300 560 400 357 1/2 1/2
LUC210E 1239 1 12 2150 560 464 357 1/2 5/8
LUC295E 2336 2 12 2000 966 400 357 1/2 3/4
LUC350E 2076 2 12 3000 966 400 357 1/2 3/4
LUC440E 2562 2 12 3600 1220 400 357 1/2 7/8
LUC550E 3252 3 12 3600 1220 464 357 1/2 7/8
LUC650E 3696 3 12 5640 1650 400 357 1/2 1-1/8
LUC700E 3264 3 12 6900 1990 400 365 7/8 1-1/8
LUC710E 3486 3 12 8400 2340 400 365 7/8 1-1/8
LUC720E 4168 4 12 8400 2340 400 365 7/8 1-1/8
LUC840E 7095 2 28 5640 1650 495 482 1-1/8 1-3/8
LUC1030E 7895 2 45 8460 1650 590 482 1-1/8 1-3/8
LUC150C 1217 1 12 2150 560 400 357 1/2 5/8
LUC205C 1239 1 12 2150 560 464 357 1/2 5/8
LUC290C 2267 2 12 3000 966 400 357 1/2 3/4
LUC345C 2075 2 12 3000 966 400 357 1/2 3/4
LUC435C 2561 2 12 3600 1220 400 357 1/2 7/8
LUC545C 3250 3 12 3600 1220 464 357 1/2 7/8
LUC645C 3694 3 12 5640 1650 400 357 7/8 1-1/8
LUC695C 3435 3 12 6900 1990 400 635 7/8 1-1/8
LUC705C 3624 3 12 8400 2340 400 365 7/8 1-1/8
LUC715C 4436 4 12 8400 2340 400 365 7/8 1-1/8
LUC835C 7093 2 28 5640 1650 495 482 1-1/8 1-3/8
LUC1025C 7893 2 45 8460 1650 590 482 1-1/8 1-3/8
www.fsw.uk.com 73
Friga-Bohn SKB Evaporators
SKB Evaporators are suitable for chilling or low temperature storage applications.
There are eighteen models with capacities ranging from 5.2 kW through to 29.5 kW.
The cases are made of White enamelled galvanised sheet. All Models are fitted with 3PH Fans.
For application notes and standard conditions please see facing page.
The above duties will need correcting to the actual temperature difference.
The duties indicated have been calculated using R404A.
Specification:
Air Vol. Air Defrost Dimensions (mm) Connections
Model cu.m/hr Fans Throw Watts L W H Liq Suct.
SKB06R 3800 1 16 1050 1061 592 641 5/8 7/8
SKB10R 8200 2 18 1500 1711 592 641 1-1/8 1-3/8
SKB12R 7600 2 18 2100 1711 592 641 1-1/8 1-3/8
SKB16R 12300 3 20 2100 2361 592 643 1-1/8 1-5/8
SKB19R 11400 3 20 3000 2361 592 643 1-1/8 1-5/8
SKB24R 14800 4 22 3600 2811 592 645 1-5/8 1-5/8
SKB06L 4000 1 16 1050 1061 592 641 5/8 7/8
SKB09L 8600 2 18 1500 1711 592 641 7/8 1-1/8
SKB11L 8000 2 18 2100 1711 592 641 1-1/8 1-3/8
SKB14L 12900 3 20 2100 2361 592 643 1-1/8 1-3/8
SKB18L 12000 3 20 3000 2361 592 643 1-1/8 1-5/8
SKB22L 15600 4 22 3600 2811 592 645 1-5/8 1-5/8
SKB06E 3800 1 16 1050 1061 592 641 7/8 1-1/8
SKB09E 8200 2 18 1500 1711 592 641 1-1/8 1-3/8
SKB11E 7600 2 18 2100 1711 592 641 1-1/8 1-5/8
SKB13E 12300 3 20 2100 2361 592 643 1-1/8 1-5/8
SKB16E 11400 3 20 3000 2361 592 643 1-5/8 1-5/8
SKB21E 14800 4 22 3600 2811 592 645 1-5/8 2-1/8
SKB05C 4000 1 16 1050 1062 592 641 7/8 1-1/8
SKB08C 8600 2 18 1500 1711 592 641 1-1/8 1-3/8
SKB10C 8000 2 18 2100 1711 592 641 1-1/8 1-5/8
SKB12C 12900 3 20 2100 2361 592 643 1-1/8 1-5/8
SKB15C 12000 3 20 3000 2361 592 643 1-5/8 1-5/8
SKB19C 15600 4 22 3600 2811 592 645 1-5/8 2-1/8
Application:
Model Air Inlet Temperature Fin Spacing Defrost
SKB**R +10C/+2C 4.23 mm (6 fpi) None
SKB**R+E1K +10C/-5C 4.23 mm (6 fpi) Electric
SKB**L +10C/+2C 6.35 mm (4 fpi) None
SKB**L+E1K +10C/-5C 6.35 mm (4 fpi) Electric
SKB**E -10C/-25C 4.25 mm (6 fpi) Heavy Duty Electric
SKB**C -10C/-25C 6.35 mm (4 fpi) Heavy Duty Electric
Standard Conditions:
Condition Air Inlet Temperature Evaporating Temperature Standard TD
SC 2 0C -8C 8K
SC 3 -18C -25C 7K
SC 4 -25C -31C 6K
www.fsw.uk.com 75
Friga-Bohn TA Evaporators
Application:
Model Air Inlet Temperature Fin Spacing Fan Motors
TA*R4P +15C/+2C (See Note) 3.63 mm (7 pfi) 4 Pole - 1500 RPM
TA*R6P +15C/+2C (See Note) 3.63 mm (7 pfi) 6 Pole - 1000 RPM
TA*R8P +15C/+2C (See Note) 3.63 mm (7 pfi) 8 Pole - 750 RPM
NOTE: For applications with an air inlet temperature of below +2C defrost
heaters will be necessary.
Standard Conditions:
Condition Air Inlet Temperature Evaporating Temperature Standard TD
SC 1 +10C 0C 10K
SC 2 0C -8C 8K
The above duties will need correcting to the actual temperature difference.
The duties indicated have been calculated using R404A. For other refrigerants please
contact us for the relevant correction factor.
Specification:
Air Vol. Air Sound Dimensions (mm) Connections
Model cu.m/hr Fans Throw Level L W H Liq Suct.
TA1R4P 1995 1 10 39 866 800 344 5/8 5/8
TA2R4P 4390 2 12 42 1366 800 344 5/8 5/8
TA3R4P 4170 2 11 42 1366 800 344 5/8 7/8
TA4R4P 3985 2 10 42 1366 800 344 5/8 7/8
TA5R4P 6255 3 11 44 1866 800 344 5/8 7/8
TA6R4P 5755 3 10 44 1866 800 344 5/8 1-1/8
TA7R4P 7975 4 10 45 2366 800 344 5/8 1-1/8
TA1R6P 1310 1 7 29 866 800 344 5/8 5/8
TA2R6P 2910 2 7 32 1366 800 344 5/8 5/8
TA3R6P 2750 2 7 32 1366 800 344 5/8 7/8
TA4R6P 2615 2 7 32 1366 800 344 5/8 7/8
TA5R6P 4125 3 7 34 1866 800 344 5/8 7/8
TA6R6P 3765 3 6 34 1866 800 344 5/8 1-1/8
TA7R6P 5230 4 7 35 2366 800 344 5/8 1-1/8
TA1R8P 945 1 5 22 866 800 344 5/8 5/8
TA2R8P 2100 2 6 25 1366 800 344 5/8 5/8
TA3R8P 1980 2 5 25 1366 800 344 5/8 7/8
TA4R8P 1895 2 5 25 1366 800 344 5/8 7/8
TA5R8P 2975 3 5 27 1866 800 344 5/8 7/8
TA6R8P 2730 3 5 27 1866 800 344 5/8 1-1/8
TA7R8P 3785 4 5 28 2366 800 344 5/8 1-1/8
Defrost Kits
www.fsw.uk.com 77
Friga-Bohn GT2I Evaporators
GT21 Evaporators are dual discharge and designed for installation in Cold Rooms, Airlocks, Laboratories,
Preparation and Packing Rooms. They come with a choice of fin spacing and fan speeds - please see
application notes on facing page. Defrost heaters can be supplied if required.
Standard Conditions:
Condition Air Inlet Temperature Evaporating Temperature Standard TD
SC 1 +10C 0C 10K
SC 2 0C -8C 8K
The above duties will need correcting to the actual temperature difference.
The duties indicated have been calculated using R404A. For other refrigerants please
contact us for the relevant correction factor. Please see facing page for application notes.
Specification:
Model Air Vol. Air Sound Dimensions (mm) Connections
GT2I cu.m/hr Fans Throw 6P / 8P L W H Liquid Suction
24R 6/8P 20550 2 17 M 50 / 46 2662 1445 684 7/8 1-5/8
26R 6/8P 18440 2 15 M 50 / 46 2662 1445 684 1-1/8 1-5/8
28R 6/8P 16910 2 14 M 50 / 46 2662 1445 684 1-1/8 1-5/8
34R 6/8P 30820 3 17 M 52 / 48 3714 1445 684 1-1/8 2-1/8
36R 6/8P 27660 3 15 M 52 / 48 3714 1445 684 1-3/8 2-1/8
38R 6/8P 25370 3 14 M 52 / 48 3714 1445 684 1-3/8 2-1/8
44R 6/8P 41090 4 17 M 53 / 49 4766 1445 684 1-3/8 2-1/8
46R 6/8P 36880 4 15 M 53 / 49 4766 1445 684 1-3/8 2-5/8
48R 6/8P 33820 4 14 M 53 / 49 4766 1445 684 1-5/8 2-5/8
24R 8/12P 15470 2 12 M 43 / 38 2662 1445 684 7/8 1-3/8
26R 8/12P 13770 2 11 M 43 / 38 2662 1445 684 7/8 1-5/8
28R 8/12P 12550 2 10 M 43 / 38 2662 1445 684 7/8 1-5/8
34R 8/12P 23210 3 12 M 45 / 40 3714 1445 684 1-1/8 2-1/8
36R 8/12P 20600 3 11 M 45 / 40 3714 1445 684 1-1/8 2-1/8
38R 8/12P 18830 3 10 M 45 / 40 3714 1445 684 1-3/8 2-1/8
44R 8/12P 30940 4 12 M 46 / 41 4766 1445 684 1-3/8 2-1/8
46R 8/12P 27540 4 11 M 46 / 41 4766 1445 684 1-3/8 2-1/8
48R 8/12P 25110 4 10 M 46 / 41 4766 1445 684 1-5/8 2-5/8
24L 6/8P 21800 2 18 M 50 / 46 2662 1445 684 7/8 1-5/8
26L 6/8P 19540 2 16 M 50 / 46 2662 1445 684 7/8 1-5/8
28L 6/8P 18040 2 15 M 50 / 46 2662 1445 684 1-1/8 1-5/8
34L 6/8P 32700 3 18 M 52 / 48 3714 1445 684 1-1/8 2-1/8
36L 6/8P 29300 3 16 M 52 / 48 3714 1445 684 1-1/8 2-1/8
38L 6/8P 27060 3 15 M 52 / 48 3714 1445 684 1-3/8 2-1/8
44L 6/8P 43600 4 18 M 53 / 49 4766 1445 684 1-3/8 2-1/8
46L 6/8P 39070 4 16 M 53 / 49 4766 1445 684 1-3/8 2-5/8
48L 6/8P 36080 4 15 M 53 / 49 4766 1445 684 1-5/8 2-5/8
24L 8/12P 16060 2 11 M 43 / 38 2662 1445 684 5/8 1-3/8
26L 8/12P 14700 2 10 M 43 / 38 2662 1445 684 7/8 1-3/8
28L 8/12P 13440 2 9M 43 / 38 2662 1445 684 7/8 1-3/8
34L 8/12P 24080 3 11 M 45 / 40 3714 1445 684 7/8 1-5/8
36L 8/12P 22050 3 10 M 45 / 40 3714 1445 684 1-1/8 1-5/8
38L 8/12P 20160 3 9M 45 / 40 3714 1445 684 1-3/8 2-1/8
44L 8/12P 32110 4 11 M 46 / 41 4766 1445 684 1-1/8 2-1/8
46L 8/12P 29400 4 10 M 46 / 41 4766 1445 684 1-3/8 2-1/8
48L 8/12P 26880 4 9M 46 / 41 4766 1445 684 1-5/8 2-1/8
All motors are 400 volt, 3 PH, Dual Speed. Duties, air volumes, air throw and sound levels
are all quoted using the higher of the two speeds. If you require data for the lower speeds please
contact our sales office.
NOTE: For applications with an air inlet temperature of below +5C defrost heaters will be necessary.
Defrost Kits
www.fsw.uk.com 79
Friga-Bohn Spares
www.fsw.uk.com 81
GEA Searle
The NEW TEC Cooler
The next generation in cooling
TEC Cooler
The TEC range of nine small blow through unit coolers us-
ing high efficiency EC fans as standard, provid a significant
reduction in energy consumption and therefore running
costs. With a wide operating range + 10 C to -40 C, the
coolers are suitable for both high, medium and low tem-
perature applications.
1, 2 or 3 fan configurations
www.searle.co.uk
TEC is a range of nine small blow through unit coolers using high efficiency EC fans as standard,
providing a significant reduction in energy consumption and therefore running costs. With a wide
operating range + 10 C to -40 C, the coolers are suitable for both high, medium and low temperature
applications in areas such as reach-in and walk - in cold cabinets, small cold rooms and similar
situations. Nominal capacities are from 0.52kW to 3.4kW (Standard Condition 2) when used with low
ozone depletion refrigerants such as R134a, R404A and R507A
W/Mounted Drain Tray Kits E/Defrost Kits (Ceiling Mounted) E/Defrost Kits (Wall Mounted)
Code Model Code Model Code Model
R1035 WT1/2-PAN R1042 T1-LTKIT R1048 WT1/2-LTKIT
R1036 WT3-PAN R1043 T2-LTKIT R1049 WT3-LTKIT
R1037 WT3.5/4-PAN R1044 T3-LTKIT R1050 WT3.5/4-LTKIT
R1038 WT5-PAN R1045 T3.5/4-LTKIT R1051 WT5-LTKIT
R1039 WT6-PAN R1046 T5/6-LTKIT R1052 WT6-LTKIT
R1040 WT7-PAN R1047 T7/8-LTKIT R1053 WT7/8-LTKIT
R1041 WT8-PAN
Specification:
Air Vol. Connections Dimensions (mm) Weight.
Model Fans cu/m hr Inlet. Outlet. H W D (kg)
Fin Spacing 5mm, 7mm
TEC1-5FPI 1 580(5), 540(7) 3/8" 3/8" 180 525 375 7.3
TEC2-5FPI 1 520(5), 490(7) 3/8" 3/8" 180 525 375 8.2
TEC3-5FPI 1 580(5), 550(7) 3/8" 3/8" 180 690 375 9.8
TEC3.5-5FPI 1 620(5), 590(7) 3/8" 1/2" 180 865 375 12
TEC4-5FPI 2 1010(5), 950(7) 3/8" 1/2" 180 865 375 13.7
TEC5-5FPI 2 1120(5), 1080(7) 3/8" 1/2" 180 1120 375 16.4
TEC6-5FPI 2 1210(5), 1080(7) 1/2" 5/8" 230 1120 375 18.5
TEC7-5FPI 3 1690(5), 1620(7) 1/2" 7/8" 180 1528 375 24
TEC8-5FPI 3 1810(5), 1730(7) 1/2" 7/8" 230 1528 375 26.9
The GEA Searle KEC cooler is the next generation of Unit Cooler, with market leading performance,
noise levels and energy efficiency. Using EC Technology as standard across the range,
the Power Input for the KEC cooler is typically 50% that of other cooler motors. The KEC coolers
cover a capacity range from 1.2 10.7kW and are ideally suited for cold room applications
and cool cabinets. The range has a modern aesthetic design and is easy to install and maintain.
www.fsw.uk.com 85
Searle - KEC Unit Cooler
Specification:
Air Vol. Connections Dimensions (mm) Weight.
Model Fans cu/m hr Inlet. Outlet. H W D (kg)
4mm Fin Spacing
KEC10-4MM NO DE 1 0.28 1/2" 1/2" 393 726 460 27
KEC15-4MM NO DE 1 0.28 1/2" 1/2" 393 726 460 28
KEC20-4MM NO DE 1 0.29 1/2" 5/8" 393 876 460 33
KEC25-4MM NO DE 1 0.42 1/2" 5/8" 393 876 460 33
KEC30-4MM NO DE 1 0.40 1/2" 7/8" 393 876 460 35
KEC35-4MM NO DE 2 0.58 1/2" 7/8" 393 1326 460 47
KEC40-4MM NO DE 2 0.83 1/2" 7/8" 393 1326 460 47
KEC45-4MM NO DE 2 0.81 1/2" 7/8" 393 1326 460 53
KEC55-4MM NO DE 3 1.25 1/2" 7/8" 393 1826 460 67
KEC70-4MM NO DE 3 1.21 1/2" 7/8" 393 1826 460 74
The KMe range of coolers is ideally suited to largecold rooms and small warehouses where an
efficient solution is required. The KMe can also be used for industrial food processing and agricultural
applications.and cool cabinets. Standard features of the range :- 1/2 OD D fin inner grooved copper
tube, 4mm, 6mm or 8mm fin spacing, 400mm energy efficient fanset and powder coated galvanised
steel case. KMe evaporators available with 3 phase fan motors on request.
KMe Options
Aerofoil fans 3PH 50Hz KMe Air Streamer
Aerofoil fans 3PH 60 Hz Cooler Guard
KMe 400mm EC Fans Stainless Steel Casing
KMe Peripheral Heater
KMe Fan Plate Heater
www.fsw.uk.com 87
Searle - KME Unit Cooler
Specification:
Air Vol. Connections Dimensions (mm) Weight.
Model Fans cu/m hr Inlet. Outlet. H W D (kg)
4mm Fin Spacing - No Defrost
KME50-4 4AL 1 0.89 1/2" 1-1/8" 574 1007 540 85
KME60-4 4AL 1 0.96 5/8" 1-1/8" 574 1332 540 112
KME80-4 4AL 2 1.89 5/8" 1-1/8" 574 1682 540 129
KME95-4 4AL 2 1.78 5/8" 1-1/8" 574 1682 540 139
KME115-4 4AL 3 2.83 7/8" 1-3/8" 574 2357 708 170
KME140-4 4AL 3 2.68 7/8" 1-3/8" 574 2357 708 195
KME175-4 4AL 4 3.45 7/8" 1-3/8" 574 2732 708 217
Specification:
Air Vol. Connections Dimensions (mm) Weight.
Model Fans cu/m hr Inlet. Outlet. H W D (kg)
6mm Fin Spacing - No Defrost
KME50-6 6AL 1 0.98 1/2" 1-1/8" 574 1007 540 83
KME60-6 6AL 1 1.01 5/8" 1-1/8" 574 1332 540 109
KME80-6 6AL 2 2.00 5/8" 1-1/8" 574 1682 540 126
KME95-6 6AL 2 1.95 5/8" 1-1/8" 574 1682 540 135
KME115-6 6AL 3 3.00 7/8" 1-3/8" 574 2357 708 166
KME140-6 6AL 3 2.93 7/8" 1-3/8" 574 2357 708 190
KME175-6 6AL 4 3.86 7/8" 1-3/8" 574 2732 708 212
www.fsw.uk.com 89
Searle - TG Spares Searle - DSR Spares
Code Description Code Description
R3020 Motor 15W, 220/240V, 1Ph, 50/60Hz R3200 Motor 25W, 220/240V, 1Ph, 50/60Hz, 2-Speed
(inc Capacitor)
R3021 Fan 230mm. 5-Blade, 31 Pitch, 50Hz R3201 Motor 70W, 220/240V, 1Ph, 50/60Hz, Single
R3022 Fan 230mm. 5-Blade, 20 Pitch, 60Hz Speed (inc Capacitor)
R3014 Fanguard R3205 Fan 305mm, 5-Blades, 24 Pitch, 50Hz,
Hubless
R3025 Fan Plate / Drain Pan TG1,2
R3206 Fan 305mm, 5-Blades, 20 Pitch, 60Hz,
R3026 Fan Plate / Drain Pan TG3 Hubless
R3027 Fan Plate / Drain Pan TG3-5 R3207 Fan 305mm, 4-Blades, 32 Pitch, 50Hz, With
Hub
R3028 Fan Plate / Drain Pan TG4
Fan 305mm, 4-Blades, 26 Pitch, 60Hz, With
R3208
R3029 Fan Plate / Drain Pan TG5 Hub
R3030 Fan Plate / Drain Pan TG6 R3210 Defrost HRT 790W, 230V, U' Bend
R3031 Fan Plate / Drain Pan TG7
R3211 Defrost HRT 1425W, 230V, U' Bend
R3032 Fan Plate / Drain Pan TG8
R3212 Defrost HRT 2135W, 230V, U' Bend
R3213 Defrost HRT 2850W, 230V, U' Bend
R3213 Defrost HRT 2850W, 230V, U' Bend
Searle - KS Spares R3214 Defrost HRT 985W, 230V, Linked Pair
R3220 Defrost HRT Sump Heater Assembly
Code Description
R3385 Motor 70W, 220/240V, 1Ph, 50/60Hz R3015 Defrost HRT Drain Connection 1" BSP Nut
R3386 Capacitor for 210-070-104 Motor R3017 Defrost HRT Drain Gasket
R3387 Fan 305mm, 4-Blade,22, 50/60Hz R3221 Defrost HRT Thermostat, Ranco F25-107
R3256 Fan 310mm, 4-Blade, 36, 50Hz R3222 Defrost HRT Time Switch AFR1121s, 50Hz
R3388 Fan 310mm, 4-Blade, 28, 60Hz R3223 Defrost HRT Time Switch AFR4121s, 60Hz
R3389 Fan Cowl R3224 Defrost HRT Thermal Cut-out (for Air Heaters)
R3263 Fan Guard R3230 Fanplate / Draintray DSR 12, 19, 22
R3390 Fan Guard Rubber washers
R3231 Fanplate / Draintray DSR 36, 42
R3015 Drain Connection (1" BSP)
R3232 Fanplate / Draintray DSR 51, 62
R3017 Drain Connection Gasket
R3233 Fanplate / Draintray DSR 68, 83, 100, 116
R3312 575W, 220V, +U' Bend
R3395 650W, 220V, +U' Bend R3235 TRIAC RVM-5E 230V 1PH 50/60Hz 4.5A
R3210 790W, 220V, +U' Bend R3236 TRIAC REE-50 230V 1PH 50/60hZ 5.0A
R3396 1210W, 220V, +U' Bend R3237 Junction Box 264x214x110mm - 03752
R3211 1425W, 220V, +U' Bend R3238 TRIAC 5A COMP WITH J/BOX
R3212 2135W, 220V, +U' Bend R3239 Condensate Pump with remote sensor
R3397 1100W, 265V, +U' Bend 60Hz R3240 Insulated sump heater assembly
R3399 1950W, 265V, U-Bend 60Hz
R3245 1kW Heater Kit
R3400 Heater Clips
R3246 2kW Heater Kit
R3405 Drain Pan KS10 & KS15
R3247 3kW Heater Kit
R3406 Drain Pan KS20
R3407 Drain Pan KS25
R3408 Drain Pan KS35
R3409 Drain Pan KS40
R3410 Drain Pan KS45
R3411 Drain Pan KS55
R3412 Drain Pan KS70
R3413 Motor Bracket All Models
R3414 End Panel KS25/40/45/70
R3415 End Panel KS10/15/20/35/55
www.fsw.uk.com 91
LU-VE SHP Ceiling Mount Panel Coolers
The SHP coolers have been designed for reach-in cabinets. The range consists of two models with nominal
capacities of 470 and 580 watts. The coolers are suitable for operating temperature of between -21C and
+15C. The casings are easily removed to provide easy access for installation, service and cleaning.
For room temperatures below +2C electric defrost models must be used.
Electric Defrost
R104 SHP6E - 258
R106 SHP9E - 319
The SHS coolers have been designed for small cold rooms and reach-in cabinets. The range consists of eight
models covering nominal capacities between 700 and 2290 watts.
The SHS coolers utilise LUVEs super efficient Turbocoil2 coils. The coolers are low noise with the added
benefit of low energy consumption.
The coolers are suitable for operating temperature of between -21C and +15C. The casings are easily removed
to provide easy access for installation, service and cleaning.
The above duties will need correcting to the actual temperature difference.
The duties indicted have been calculated using R404A. for other refrigerants please
Contact us for the relevant correction factor. Please see facing page for application notes.
Electric Defrost
R710 SHF 50SE - 294
R711 SHF 60SE - 350
R712 SHF 70SE - 406
R713 SHF 55DE - 344
R714 SHF 65DE - 394
Specification:
Air Vol. No of Air Defrost Dimensions (mm) Motor Connections Weight
Model cu.m/hr Fans Throw Watts * A B Amps In Out Kg
4.3mm Fin Spacing (154mm Blades)
SHP6 220 1 3.0 M 270 390 315 0.26 8 mm 8 mm 2.7
SHP9 200 1 3.0 M 270 390 315 0.26 8 mm 8 mm 2.9
5.0mm Fin Spacing (230mm Blades)
SHS 8 440 1 - 335 493 374 0.22 3/8 3/8 5.1
SHS12 440 1 - 335 493 374 0.22 3/8 3/8 5.2
SHS13 500 1 - 460 647 524 0.22 3/8 3/8 6.1
SHS15 500 1 - 460 647 524 0.22 3/8 3/8 6.2
SHS18 850 2 - 585 803 674 0.22 3/8 3/8 8.6
SHS22 850 2 - 585 803 674 0.30 3/8 3/8 8.7
SHS26 980 2 - 825 1126 974 0.30 3/8 3/8 10.8
SHS32 1250 3 - 825 1126 974 0.30 3/8 3/8 12.3
5.5mm Fin Spacing (154mm Blades)
SHF 50S 240 1 3.1 M 330 382 350 0.26 8 mm 8 mm 3.9
SHF 60S 265 1 3.4 M 450 472 440 0.26 8 mm 8 mm 4.6
SHF 70S 345 2 2.9 M 450 472 440 0.52 8 mm 8 mm 5.6
SHF 55D 310 2 2 x 2.0 M 330 382 350 0.52 8 mm 8 mm 4.7
SHF 65D 325 2 2 x 2.2 M 450 472 440 0.52 8 mm 8 mm 5.6
Standard Conditions:
Condition Air Inlet Temperature Evaporating Temperature Standard TD
SC 2 0C -8C 8K
SC 3 -18C -25C 7K
www.fsw.uk.com 93
LU-VE SHA Panel Coolers
The SHA angled coolers have been designed for small cold rooms.
The above duties will need correcting to the actual temperature difference.
The duties indicted have been calculated using R404A. for other refrigerants please
Contact us for the relevant correction factor. Please see facing page for application notes.
Specification:
Air Vol. No of Air Defrost Dimensions (mm) Motor Connections Weight
Model cu.m/hr Fans Throw Watts * A B Amps In Out Kg
3.1mm Fin Spacing (275mm Blades)
SHA 30-32 550 1 8M 500 605 293 0.62 10 mm 10 mm 9.5
SHA 40-32 650 1 8M 650 730 418 0.62 12 mm 22 mm 11.5
SHA 60-32 1100 2 9M 900 930 618 0.62 12 mm 22 mm 16.5
SHA 80-32 1300 2 9M 1200 1180 868 0.64 12 mm 28 mm 20.5
SHA120-32 1950 3 10 M 1750 1630 1318 0.64 12 mm 28 mm 29.5
SHA160-32 2600 4 11 M 2300 2080 1768 0.64 12 mm 28 mm 39.0
4.8mm Fin Spacing (275mm Blades)
SHA 21-50 600 1 9M 500 605 293 0.62 10 mm 10 mm 9.0
SHA 27-50 720 1 9M 650 730 418 0.62 12 mm 22 mm 10.5
SHA 41-50 1200 2 10 M 900 930 618 0.62 12 mm 22 mm 15.5
SHA 53-50 1440 2 10 M 1200 1180 868 0.64 12 mm 28 mm 19.0
SHA 79-50 2160 3 11 M 1750 1630 1318 0.64 12 mm 28 mm 27.5
SHA106-50 2880 4 12 M 2300 2080 1768 0.64 12 mm 28 mm 36.0
7.7mm Fin Spacing (275mm Blades)
SHA 14-80 670 1 10 M 500 605 293 0.62 10 mm 10 mm 8.5
SHA 17-80 750 1 10 M 650 730 418 0.62 12 mm 22 mm 10.0
SHA 28-80 1340 2 11 M 900 930 618 0.62 12 mm 22 mm 15.0
SHA 35-80 1500 2 11 M 1200 1180 868 0.64 12 mm 28 mm 18.0
SHA 52-80 2250 3 12 M 1750 1630 1318 0.64 12 mm 28 mm 26.0
SHA 70-80 3000 4 13 M 2300 2080 1768 0.64 12 mm 28 mm 34.0
Standard Conditions:
Condition Air Inlet Temperature Evaporating Temperature Standard TD
SC 2 0C -8C 8K
SC 3 -18C -25C 7K
www.fsw.uk.com 95
LU-VE F27HC Unit Coolers
Electric Defrost
R310 F27HC 25-4E - 990
R311 F27HC 36-4E - 1292
R312 F27HC 49-4E - 2090
R313 F27HC 71-4E - 2612
R314 F27HC107-4E - 3960
R315 F27HC142-4E - 5170
The above duties will need correcting to the actual temperature difference.
The duties indicted have been calculated using R404A. for other refrigerants please
Contact us for the relevant correction factor. Please see facing page for application notes.
Specification:
Air Vol. No of Air Defrost Dimensions (mm) Motor Connections Weight
Model cu.m/hr Fans Throw Watts * Wid Hei Amps In Out Kg
4.5mm Fin Spacing (275mm Blades)
F27HC 25-4N 900 1 10.5 M 1220 678 415 0.6 3/8 3/8 12
F27HC 36-4N 900 1 10.5 M 1220 678 415 0.6 1/2 7/8 13
F27HC 49-4N 1800 2 12.5 M 2160 1048 415 1.2 1/2 7/8 19
F27HC 71-4N 1800 2 12.5 M 2160 1048 415 1.2 1/2 1-1/8 21
F27HC107-4N 2750 3 14.0 M 3080 1418 415 1.8 1/2 1-1/8 28
F27HC142-4N 3600 4 15.5 M 4000 1788 415 2.4 1/2 1-1/8 36
6.0mm Fin Spacing (275mm Blades)
F27HC 19-6N 1000 1 11.0 M 1220 678 415 0.6 3/8 3/8 11
F27HC 28-6N 1000 1 11.0 M 1220 678 415 0.6 1/2 7/8 12
F27HC 38-6N 2000 2 13.0 M 2160 1048 415 1.2 1/2 7/8 18
F27HC 55-6N 2000 2 13.0 M 2160 1048 415 1.2 1/2 1-1/8 20
F27HC 85-6N 3000 3 14.5 M 3080 1418 415 1.8 1/2 1-1/8 27
F27HC110-6N 4000 4 16.0 M 3080 1788 415 2.4 1/2 1-1/8 34
7.0mm Fin Spacing (275mm Blades)
F27HC 16-7N 1000 1 11.5 M 1220 678 415 0.6 3/8 3/8 10
F27HC 23-7N 1000 1 11.5 M 1220 678 415 0.6 1/2 7/8 11
F27HC 31-7N 2000 1 13.5 M 2160 1048 415 1.2 1/2 7/8 17
F27HC 46-7N 2000 2 13.5 M 2160 1048 415 1.2 1/2 1-1/8 19
F27HC 70-7N 3000 2 15.5 M 3080 1418 415 1.8 1/2 1-1/8 26
F27HC 92-7N 4000 3 17.0 M 3080 1788 415 2.4 1/2 1-1/8 32
Standard Conditions:
Condition Air Inlet Temperature Evaporating Temperature Standard TD
SC 2 0C -8C 8K
SC 3 -18C -25C 7K
www.fsw.uk.com 97
LU-VE F35HC Unit Coolers
The above duties will need correcting to the actual temperature difference.
The duties indicted have been calculated using R404A. for other refrigerants please
contact us for the relevant correction factor. Please see facing page for application notes.
Standard Conditions:
Condition Air Inlet Temperature Evaporating Temperature Standard TD
SC 2 0C -8C 8K
SC 3 -18C -25C 7K
www.fsw.uk.com 99
LU-VE FHD Dual Discharge Coolers - Cold Rooms and Food Prep Area Capacity @ Eurovent SC2
Electric Defrost
R810 FHD 711-3 2800 2470
R811 FHD 712-3 3940 3350
R812 FHD 721-3 5630 4970
R813 FHD 722-3 7910 6730
R814 FHD 732-3 11700 10050
R815 FHD 742-3 14570 12730
Electric Defrost
R830 FHD 811-4 2280 2020
R831 FHD 812-4 3350 2940
R832 FHD 821-4 4560 4050
R833 FHD 822-4 6700 5850
R834 FHD 832-4 10120 8870
R835 FHD 842-4 12990 11480
Electric Defrost
R850 FHD 911-7 1620 1470
R851 FHD 912-7 2540 2240
R852 FHD 921-7 3240 2940
R853 FHD 922-7 5040 4490
R854 FHD 932-7 7760 6880
R855 FHD 942-7 10230 9130
Specification:
Air Vol. No of Air Defrost Dimensions (mm) Motor Connections Weight
Model cu.m/hr Fans Throw Watts * A B Amps Liq Suct. Kg
3.0.mm Fin Spacing
FHD 711-3 1800 1 8-11m 1800 888 596 0.7 1/2 7/8 23
FHD 712-3 1800 1 8-11m 1800 888 596 0.7 1/2 1-1/8 24
FHD 721-3 3600 2 10-11m 3200 1443 1151 1.4 1/2 1-1/8 26
FHD 722-3 3600 2 10-11m 3200 1443 1151 1.4 5/8 1-3/8 39
FHD 732-3 5400 3 11-14m 4700 1998 1706 2.1 5/8 1-3/8 58
FHD 743-3 7200 4 11-15m 6200 2553 2261 2.8 5/8 1-3/8 76
www.fsw.uk.com 101
LU-VE SHDS Dual Discharge Coolers
Low air velocity and noise suitable for labs & prep rooms
Electric Defrost
R510 SHDS 52-32E - 2442
R511 SHDS 74-32E - 2812
R512 SHDS114-32E - 3774
R513 SHDS146-32E - 5624
R514 SHDS221-32E - 8621
R515 SHDS294-32E - 11396
R516 SHDS368-32E - 13764
Specification:
Air Vol. No of Air Throw Defrost Dimensions (mm) Motor Connections Weight
Model cu.m/hr Fans Metres Watts * A B Amps In Out Kg
3.1mm Fin Spacing (330mm Blades)
SHDS 52-32 1150 1 6 1300 740 485 0.31 1/2 7/8 21.0
SHDS 74-32 1150 1 6 1300 740 485 0.31 1/2 1-1/8 22.0
SHDS114-32 1350 1 5 2000 1040 785 0.31 1/2 1-1/8 26.0
SHDS146-32 2300 2 7 2400 1190 935 0.62 5/8 1-3/8 37.5
SHDS221-32 3450 3 8 3540 1640 1385 0.93 5/8 1-3/8 53.0
SHDS294-32 4600 4 8.5 4760 2090 1835 1.24 5/8 1-3/8 68.5
SHDS368-32 5750 5 9 5800 2540 2285 1.55 5/8 1-3/8 84.0
4.8mm Fin Spacing (330mm Blades)
SHDS 34-50 1300 1 7 1300 740 485 0.31 1/2 7/8 21.0
SHDS 49-50 1300 1 7 1300 740 485 0.31 1/2 1-1/8 22.0
SHDS 73-50 1450 1 5.5 2000 1040 785 0.31 1/2 1-1/8 26.0
SHDS 98-50 2600 2 8 2400 1190 935 0.62 5/8 1-3/8 37.5
SHDS148-50 3900 3 9 3540 1640 1385 0.93 5/8 1-3/8 53.0
SHDS196-50 5200 4 9.5 4760 2090 1835 1.24 5/8 1-3/8 68.5
SHDS245-50 6500 5 10 5800 2540 2285 1.55 5/8 1-3/8 84.0
7.7mm Fin Spacing (330mm Blades)
SHDS 21-80 1400 1 8 1300 740 485 0.31 1/2 7/8 21.0
SHDS 31-80 1400 1 8 1300 740 485 0.31 1/2 1-1/8 22.0
SHDS 46-80 1500 1 6 2000 1040 785 0.31 1/2 1-1/8 26.0
SHDS 62-80 2800 2 9 2400 1190 935 0.62 5/8 1-3/8 37.5
SHDS 93-80 4200 3 10 3540 1640 1385 0.93 5/8 1-3/8 53.0
SHDS124-80 5600 4 10.5 4760 2090 1835 1.24 5/8 1-3/8 68.5
SHDS155-80 7000 5 11 5800 2540 2285 1.55 5/8 1-3/8 84.0
* Air Throw is side distribution therefore 2 x given figure i.e. SHDS52-32 = 2 x 6M (12M)
Standard Conditions:
Condition Air Inlet Temperature Evaporating Temperature Standard TD
SC 2 0C -8C 8K
SC 3 -18C -25C 7K
www.fsw.uk.com 103
Commercial Cubic Cooler Spares Production Models
www.fsw.uk.com 105