Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
Approved by:
Note:
1-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
- CONTENTS -
REVISION HISTORY ------------------------------------------------------- 3
8. PACKAGING ------------------------------------------------------- 24
8.1 PACKING SPECIFICATIONS
8.2 PACKING Method
2-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
REVISION HISTORY
Page
Version Date Section Description
(New)
Ver 2.0 Dec.26,03 All All Approval Specification was first issued.
3-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
1. GENERAL DESCRIPTION
1.1 OVERVIEW
V296W1- L14 is a 30 TFT Liquid Crystal Display module with 16-CCFL Backlight unit and 1ch-LVDS
interface. This module supports 1280 x 768 WXGA format and can display true 16.7M colors ( 8-bit/color).
The inverter module for backlight is built-in.
1.2 FEATURES
-Ultra wide viewing angle Super MVA technology
-High brightness (550 nits)
- High contrast ratio (800:1)
- Fast response time
- High color saturation NTSC 75%
- WXGA (1280 x 768 pixels) resolution
- DE (Data Enable) only mode
- LVDS (Low Voltage Differential Signaling) interface
1.3 APPLICATION
- TFT LCD TVs
4-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
100
90
80
60
Operating Range
40
20
5 Storage Range
-40 -20 0 20 40 60 80
Temperature (C)
5-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE Ta = 25 2 C
Value
Parameter Symbol Unit Note
Min. Typ. Max.
Power Supply Voltage Vcc 4.5 5.0 5.5 V -
Ripple Voltage VRP - - 200 mV -
Rush Current IRUSH - - 3.0 A (2)
White - 1.5 - A (3)a
Power Supply Current Black lcc - 0.8 - A (3)b
Vertical Stripe - 1.2 - A (3)c
LVDS differential input high threshold
VTH - - +100 mV
voltage
LVDS differential input low threshold
VTL -100 - - mV
voltage
LVDS common input voltage Vic 1.125 1.25 1.375 V
Terminating Resistor RT - 100 - ohm
Note (1) The module should be always operated within above ranges.
Note (2) Measurement Conditions:
6-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
+5.0V
Q1 2SK1475
Vcc
C3
FUSE (LCD Module Input)
R1 1uF
47K
(High to Low)
(Control Signal)
Q2
R2
SW 2SK1470
1K
+12V
47K C2
VR1
C1
0.01uF
1uF
0.9Vcc
0.1Vcc
GND
470Ps
Note (3) The specified power supply current is under the conditions at Vcc = 5 V, Ta = 25 2 C, fv = 60 Hz,
whereas a power dissipation check pattern below is displayed.
7-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
R G B R G B
B R G B R G B R
B R G B R G B R
R G B R G B
Active Area
HV (Pink) 1
A
HV (White)
A 2
LCD HV (Pink) 1
A
HV (White)
Module 2
A
HV (Pink) 1
A
HV (White)
A 2
HV (Pink) 1
A
HV (White) 2
A Inverter
HV (Pink) 1
A
HV (White)
A 2
HV (Pink) 1
A
HV (White)
A 2
A HV (Pink) 1
HV (White)
A 2
A HV (Pink) 1
HV (White)
A 2 LV (Gray)
8-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
Note (2) The open lamp voltage VS should be applied to the lamp for more than 1 second after startup.
Otherwise the lamp may not be turned on.
Note (3) The lamp frequency may produce interference with horizontal synchronous frequency from the
display, and this may cause line flow on the display. In order to avoid interference, the lamp
frequency should be detached from the horizontal synchronous frequency and its harmonics as far
as possible.
Note (5) The life time of a lamp is defined as the time in which it continues to operate under the condition Ta
= 25 2 and IL = 4.2 ~ 4.8 mArms until one of the following events occurs:
(a) When the brightness becomes equal or less than 50% of its original value.
(b) When the effective discharge length becomes equal or lower than 80% of its original value.
(Effective discharge length is defined as an area that has equal or more than 70% brightness
compared to the brightness at the center point.)
Note (6) The waveform of the voltage output of inverter must be area-symmetric and the design of the
inverter must have specifications for the modularized lamp. The performance of the Backlight, such
as lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter for the
lamp. All the parameters of an inverter should be carefully designed to avoid producing too much
current leakage from high voltage output of the inverter. When designing or ordering the inverter
please make sure that a poor lighting caused by the mismatch of the Backlight and the inverter
(miss-lighting, flicker, etc.) never occurs. If the above situation is confirmed, the module should be
operated in the same manners when it is installed in your instrument.
Note (7) The power source capacity should be 3 times of inverter total power consumption PBL or higher, and
add an 0.1uf ceramic capacitor and an 1000uf aluminum capacitor or equivalent which should be
paralleled between VBL and ground of input connector in case of inverter malfunction.
Note (8) Requirements for a system inverter design, which is intended to have a better display performance,
a better power efficiency and a more reliable lamp, are following. It shall help increase the lamp
lifetime and reduce leakage current.
a. The asymmetry rate of the lamp current waveform should be less than 5%.
b. The crest factor of lamp current waveform should be within 1.414 to 1.7.
c. Inverter output waveform had better be more similar to ideal sine wave.
9-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
1 M Parallel in (Note 1)
Interface Impedance RIN
0.5 K Serial in (Note 1)
BLON Delay Time Ton 500 mS (Note 5)
Note (1) Permanent damage to the device may occur if interface impedance are exceeded above definition.
Note (2) All the interface circuits without spike suppress component hence the hot plug in or plug out of all
connectors are inhibited.
Note (3) External PWM control signal (E_PWM) should be connected to low in case internal PWM was
selected. (SEL = low). Internal PWM control signal (I_PWM) should be connected to ground in case
external PWM was selected. (SEL = high), Floating of any control signal is not allowed.
Note (4) For dimming control function operation chart was shown as below.
Note (5) The power on sequence was defined as following. Before BLON signal raised, the input power VBL
shall maintain a BLON Delay Time (Ton) time in advance.
10-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
VBL
0 Ton Toff
VBLON 2.0V
0.8V
0
Backlight on duration
Tr Tf
VSEL 2.0V
0.8V Int. Dimming Function
0
Ext. Dimming Function
TPWMR TPWMF
VEPWM 2.0V
0.8V
0
3.0V
VIPWM
0
VW
External External
PWM PWM Duty
Period
Minimun 100%
Duty
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
SCAN DRIVER IC
RX3(+/-)
RXC(+/-)
11-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
12-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
1 LV(Gray)
1 HV(Pink)
2 HV(White)
8 female connectors
BHR-03-VS-1 (JST)
1 HV(Pink)
2 HV(White)
1 HV(Pink)
2 HV(White)
13-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
Note (1). The inverter input power source connector CN1 is a model S10B- PH-SM3-TB(D)(LF), manufactured
by JST or equivalent. The inverter interface connector CN2 for control signal is a model S12B-
PH-SM3-TB(D)(LF), manufactured by JST or equivalent.
CN1:S10B- PH-SM3-TB(D)(LF) or equivalent CN2: S12B- PH-SM3-TB(D)(LF) or equivalent
Signal
Pin Feature Pin Signal name Feature
name
1 VBL +24 V
1
2
2
3
3 VBL +24 V
4
4
5
5
6 GND GND
6
7
7
8
8 GND GND
9 SEL Internal/External PWM Selection
9
10 E_PWM External PWM Control
10
11 I_PWM Internal PWM Control
12 BLON BL ON/OFF
14-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
Rx0+ 51
100pF RxOUT
TxIN Rx0- R0-R7
R0-R7 51
Rx1+ 51 G0-G7
G0-G7 100pF
Rx1-
51 B0-B7
B0-B7
Rx2+ 51
100pF
DE Rx2- DE
51
Rx3+ 51
100pF
Rx3-
51
Host
CLK+ 51
Graphics PLL 100pF DCLK
CLK- PLL
Controller 51 Timing
Controller
LVDS Transmitter LVDS Receiver
THC63LVDM83A THC63LVDF84A
(LVDF83A)
Notes: 1) The system must have the transmitter to drive the module.
2) LVDS cable impedance shall be 50 ohms per signal line or about 100 ohms per twist-pair line when it is
used differentially.
15-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
R0 51 TxIN0 27 Rx OUT0 R0
R1 52 TxIN1 29 Rx OUT1 R1
R2 54 TxIN2 TA OUT0+ Rx 0+ 30 Rx OUT2 R2
R3 55 TxIN3 32 Rx OUT3 R3
R4 56 TxIN4 33 Rx OUT4 R4
R5 3 TxIN6 TA OUT0- Rx 0- 35 Rx OUT6 R5
G0 4 TxIN7 37 Rx OUT7 G0
G1 6 TxIN8 38 Rx OUT8 G1
G2 7 TxIN9 39 Rx OUT9 G2
G3 11 TxIN12 TA OUT1+ Rx 1+ 43 Rx OUT12 G3
G4 12 TxIN13 45 Rx OUT13 G4
G5 14 TxIN14 46 Rx OUT14 G5
B0 15 TxIN15 TA OUT1- Rx 1- 47 Rx OUT15 B0
B1 19 TxIN18 51 Rx OUT18 B1
B2 20 TxIN19 53 Rx OUT19 B2
B3 22 TxIN20 54 Rx OUT20 B3
24bit B4 23 TxIN21 TA OUT2+ Rx 2+ 55 Rx OUT21 B4
B5 24 TxIN22 1 Rx OUT22 B5
DE 30 TxIN26 6 Rx OUT26 DE
R6 50 TxIN27 TA OUT2- Rx 2- 7 Rx OUT27 R6
R7 2 TxIN5 34 Rx OUT5 R7
G6 8 TxIN10 41 Rx OUT10 G6
G7 10 TxIN11 42 Rx OUT11 G7
B6 16 TxIN16 TA OUT3+ Rx 3+ 49 Rx OUT16 B6
B7 18 TxIN17 50 Rx OUT17 B7
RSVD 1 25 TxIN23 2 Rx OUT23 Not connect
RSVD 2 27 TxIN24 TA OUT3- Rx 3- 3 Rx OUT24 Not connect
RSVD 3 28 TxIN25 5 Rx OUT25 Not connect
16-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
Green(0) / Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Green(1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0
Green(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0
Gray
: : : : : : : : : : : : : : : : : : : : : : : : :
Scale
: : : : : : : : : : : : : : : : : : : : : : : : :
Of
Green(253) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0
Green
Green(254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0
Green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
Blue(0) / Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Blue(1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
Blue(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
Gray
: : : : : : : : : : : : : : : : : : : : : : : : :
Scale
: : : : : : : : : : : : : : : : : : : : : : : : :
Of
Blue(253) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1
Blue
Blue(254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0
Blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
17-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
The input signal timing specifications are shown as the following table and timing diagram.
Signal Item Symbol Min. Typ. Max. Unit Note
Clock Frequency 1/Tc 62 81 82 MHZ -
Frame Rate Fr - 60 64 Hz Tv=Tvd+Tvb
Total Tv 780 806 850 Th -
Vertical Active Display Term
Display Tvd 768 768 768 Th -
Blank Tvb 12 38 82 Th -
Total Th 1450 1688 2000 Tc Th=Thd+Thb
Horizontal Active Display Term Display Thd 1280 1280 1280 Tc -
Blank Thb 170 408 720 Tc -
Note: Because of this module is operated by DE only mode, Hsync and Vsync input signals should be set
to low logic level or ground. Otherwise, this module would operate abnormally.
Tv
Tvd
Tvb
DE
Th
DCLK
Tc
Thd
Thb
DE
18-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
VCC
0.1VCC 0.1Vcc
0V
0T110ms T1 T3
0T250ms
0T350ms
1sT4 T2
T4
VALID
Signals
0V
T5 T6
Note.
(1) The supply voltage of the external system for the module input should be the same as the definition of Vcc.
(2) Apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD operation of the
LCD turns off before the backlight turns off, the display may momentarily become abnormal screen.
(3) In case of VCC = off level, please keep the level of input signals on the low or keep a high impedance.
(4) T4 should be measured after the module has been fully discharged between power off and on period.
(5) Interface signal shall not be kept at high impedance when the power is on.
19-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
Item Symbol Value Unit
o
Ambient Temperature Ta 25r2 C
Ambient Humidity Ha 50r10 %RH
Supply Voltage VCC 5.0 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"
Inverter Current IL 4.5 mA
Inverter Driving Frequency FL 60 KHz
Inverter --
20-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
Note (1) Definition of Viewing Angle (Tx, Ty):
Viewing angles are measured by EZ-Contrast 160R (Eldim)
Normal
Tx = Ty = 0
Ty- Ty
6 oclock
y- x+ TX+ = 90
Ty- = 90
100%
90%
Optical
Response
10%
0%
Time
Gray to gray Gray to gray
switching time switching time
The driving signal means the signal of gray level 0, 63, 127, 191, 255.
Gray to gray average time means the average switching time of gray level 0 ,63,127,191,255 to each
other .
21-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
Note (4) Definition of Luminance of White (LC, LAVE):
Measure the luminance of gray level 255 at center point and 5 points
LC = L (5)
LAVE = [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / 5
L (x) is corresponding to the luminance of the point X at the figure in Note (8).
LCD Module
LCD Panel
22-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
Horizontal Line
D
D/4 D/2 3D/4
Vertical Line
W/4 1 2
X=1 to 5
3W/4 3 4
Active Area
23-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
8. PACKAGING
8.1 PACKING SPECIFICATIONS
(1) 3 LCD TV modules / 1 Box
(2) Box dimensions : 790(L) X 280 (W) X 564 (H)
(3) Weight : approximately 19Kg ( 3 modules per box)
LCD TV Module
Anti-static Bag
PE Foam(Bottom)
Drier
Carton Label
Carton
24-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
Corner Protector:L1130*50mm*50mm
Pallet:L1100*W1100*H135mm
Corrugated Fiberboard:L1100*W1100mm
Pallet Stack:L1100*W1100*H1273mm
Gross:175kg
PE Sheet
Carton Label
Film
Corrugated Fiberboard
PP Belt
25-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
9. DEFINITION OF LABELS
9.1 CMO MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.
XXXXXXXYMDLNNNN
Serial No.
Product Line
Revision
26-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
10. PRECAUTIONS
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
(1) Do not apply rough force such as bending or twisting to the module during assembly.
(2) It is recommended to assemble or to install a module into the users system in clean working areas. The
dust and oil may cause electrical short or worsen the polarizer.
(3) Do not apply pressure or impulse to the module to prevent the damage of LCD panel and Backlight.
(4) Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the
damage and latch-up of the CMOS LSI chips.
(5) Do not plug in or pull out the I/F connector while the module is in operation.
(6) Do not disassemble the module.
(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and
easily scratched.
(8) Moisture can easily penetrate into LCD module and may cause the damage during operation.
(9) High temperature or humidity may deteriorate the performance of LCD module. Please store LCD
modules in the specified storage conditions.
(10) When ambient temperature is lower than 10C, the display quality might be reduced. For example, the
response time will become slow, and the starting voltage of CCFL will be higher than that of room
temperature.
27-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
11. MECHANICAL CHARACTERISTICS
%*+/'+
28-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
%*+/'+
29-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
DCC No.:24044112
Issued Date: Dec. 31, 2004
Model No.: V296W1 - L14
Approval
%*+/'+
30-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO s representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com