Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Standard detectors
General information
Conventional detectors
Conventional detectors with a wide range of supply voltages.
The interactive loop detectors dene a new standard in reliable re detection. Highly developed software algorithms and
strongly expanded functionalities set new standards. Fire characteristics are selected in such a way that a re will be safely
detected.
The various options for the individual adjustment of the detector sensitivity and several setup modes dependent on the time of
day guarantee the optimum detector adjustment to the area being monitored.
With these performance characteristics all safety concepts can be implemented and ensure maximum customer benet:
- Five detector sensitivity stages/algorithms for each application (for the standard loop detectors)
- Detector sensitivity that can be switched according to environmental conditions depending on the time of day (for the standard
loop detectors)
- Automatic drift compensation of the measuring system for constant sensitivity over the whole period of application
- Automatic contamination detection and early maintenance indication for the efcient deployment of maintenance personnel
- Automatic function monitoring including sensor technology for greatest availability
- Safe operation due to emergency running characteristics during a potential processor failure
- Non-volatile memory, e.g. date of commissioning, last service, reference number, value of the drift compensation
A variety of detector installation bases and numerous modules for adding contacts and issuing signals complete this system.
Visual and acoustic signal transmitters can also be switched directly on the loop to issue alarms.
P31.311.000en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 1
Product Sheet | Detecon
Standard detectors
Optical smoke detectors, addressable
Approvals / marking
G 208033 0832-CPD-0024
P31.311.120en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 2
Product Sheet | Detecon
Standard detectors
Ionisation smoke detectors, addressable
Approvals / marking
G 208036 0832-CPD-0023
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 3
Product Sheet | Detecon
Standard detectors
Multisensor detectors, addressable
Operating voltage 17 V - 28 V DC
Sensitivity modes
Quiescent current 0.75 mA
Alarm current 3.5 mA
Smoke Heat Trigger type tminAlarm
1 1.1 % / m high Multisensor 20 s
Alarm indication 2 red LEDs
(39 inch)
-20 C to +60 C
Operating temperature 2 2.1 % / m no trigger Optical 30 s
(-4 F to +140 F)
IP rating (EN 60529) IP 43 (39 inch)
Enclosure material White polycarbonate 3 2.8 % / m low Multisensor 20 s
Relative humidity 0 to 95% (39 inch)
(IEC721-3-3) no condensation 4 4.2 % / m high Multisensor 20 s
Specication according to EN 54 part 5 and 7 (39 inch)
Weight 105 g (0.2 lbs) 5 no trigger A1 class A1 30 s
100 x 50 mm (dia. x H) heat detector
Dimensions
3.9 x 2 inch (dia.xH)
Notes
Approvals / marking The response sensitivity must be adjusted to the ambient
conditions. The settings can be changed at any time.
G 208034 0832-CPD-0025
When using the detector in mode 5 the number of max.
P31.311.520en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 4
Product Sheet | Detecon
Standard detectors
Heat detectors, addressable
Approvals / marking
P31.311.220en / 01.14
G 208035 0832-CPD-0022
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 5
Product Sheet | Detecon
Standard detectors
Detector accessories, addressable
Detector base BAX 210 Order no.: 901289
Included in delivery
1 Detector base in standard design including address cards 1
to 126.
Included in delivery
1 Detector base in standard design including address cards 1
to 126.
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 6
Product Sheet | Detecon
Standard detectors
Detector accessories, addressable
Isolator base BAX 211 Order no.: 901294
Base for the ISX 720 I isolator with large-size contact screws
for all connections. Easy assembly and simple insertion of
the isolator by clockwise rotation and lock.
Included in delivery
1 Isolator base in standard design.
Technical specifications
Material PC Approvals / marking
IP rating (EN60529) IP 43
Colour White
-20 C to +60 C
Ambient temperature
(-4 F to +140 F)
Weight 55 g (0.2 lbs)
100 x 23 mm (dia. x H)
Dimensions
3.9 x 0.9 inch (dia. x H)
Included in delivery
1 isolator for use in isolator base BAX 211.
Approvals / marking
G 200083 0832-CPD-0843
Technical specifications
Material PC
Fault indication Yellow LED
IP rating (EN60529) IP 43
Colour White
-20 C to +60 C
Ambient temperature
(-4 F to +140 F)
Weight 75 g (0.2 lbs)
P31.311.720en / 01.14
100 x 25 mm (dia. x H)
Dimensions
3.9 x 1 inch(dia. x H)
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 7
Product Sheet | Detecon
Standard detectors
Detector accessories, addressable
Included in delivery
1 isolator for mounting on a mounting rail
Approvals / marking
Technical specifications
Fault indication Yellow LED
- 20 C to + 60 C
Ambient temperatur
(-4 F to +140 F)
Weight 20 g
Dimensions 63 x 38.8 x 43 mm (BxHxT)
Connection / mounting
Recommended cable J-Y (St) Y 2x2x0.8 mm, red
Technical specifications
Air ow
1 m (39 inch)/s to max. Note
20 m (787 inch)/s VdS approval only for bypass box with optical smoke detector
Detector slot 1 Detector base BAX 284-I OMX95.
Pipe for bypass detector
2 threaded pipes DN15 galvanized, Approval for the control of re damper does not exist.
540 mm
Enclosure material Aluminium diecast, grey
-20 C to +60 C
Ambient temperature
(-4 F to +140 F) Approvals / marking
IP rating IP 23
G 28406
Weight with 2 pipes 3500 g (7.7 lbs)
130 x 165 x 95 mm (BxHxT)
Dimensions
5.1 x 6.5 x 3.7 inch (BxHxT)
P31.311.720en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 8
Product Sheet | Detecon
Standard detectors
Detector accessories, addressable
Included in delivery
1 Abox 100 905711
1 mounting plate, complete 908422
Technical specifications 1 Isolator ISX 720 901293
1 Isolator base BAX 211 901294
Material PC
IP rating (EN60529) IP 65 Not included in delivery
Colour of lower enclosure section grey Mounting hardware
Colour of upper enclosure section red
-20 C to +60 C
Ambient temperature
(-4 F to +140 F)
Weight 340 g (0.8 lbs)
140 x 140 x 70 mm (WxHxD)
Dimensions
5.5 x 5.5 x 2.8 inch (WxHxD)
Approvals / marking
P31.311.720en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 9
Product Sheet | Detecon
Standard detectors
Optical smoke detectors, addressable, Ex
Approvals / marking
Ex conformity in acc. with 94/9/EG
x II 1G Ex ia IIC T5 Ga (-20C Ta +45C)
x II 1G Ex ia IIC T4 Ga (-20C Ta +60C)
0832-CPD-0313
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 10
Product Sheet | Detecon
Standard detectors
Ionisation smoke detectors, addressable, Ex
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 11
Product Sheet | Detecon
Standard detectors
Heat detectors, addressable, Ex
Approvals / marking
Ex conformity in acc. with 94/9/EG
x II 1G Ex ia IIC T5 Ga (-20C Ta +45C)
x II 1G Ex ia IIC T4 Ga (-20C Ta +60C)
P31.311.230 - 2en / 01.14
0832-CPD-0311
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 12
Product Sheet | Detecon
Standard detectors
Detector accessories, addressable, Ex
Detector base BAX 215 Ex Order no.: 901320
Included in delivery
1 detector socket in the standard version inc. address card
from 1 to 126.
Technical specifications
Material PC
Not included in delivery
Mounting materials
Integrated isolator no
IP rating (EN60529) IP 43
Colour white Approvals / marking
-20 C to +60 C Ex conformity in acc. with 94/9/EG
Operating temperature, T4
(-4 F to +140 F) x II 1G Ex ia IIC T5 Ga (-20C Ta +45C)
-20 C to + 45 C
Operating temperature, T5 x II 1G Ex ia IIC T4 Ga (-20C Ta +60C)
(-4 F to +113 F)
Weight 55 g (0.1 lbs)
EC type approval certicate: BAS 02 ATEX 1289
100 x 8 mm (DxH)
Dimensions
3.9 x 0.3 inch (DxH)
P31.311.730 - 1en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 13
Product Sheet | Detecon
Standard detectors
Optical smoke detectors, conventional
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 14
Product Sheet | Detecon
Standard detectors
Ionisation smoke detectors, conventional
Technical specifications
Connection / mounting
Detection method double ionization chamber Connection cable standard detector 2-lead
Technology conventional
External Indication 1-lead
Recommended cable JY (St) Y 2x2x0.8 mm
Operating voltage 7.6 V - 13.2 V DC Conductor cross-section max. 2.5 mm2 (0.004 square inch)
Quiescent current approx. 0.08 mA
Alarm current approx. 20 mA Notes
Alarm indication 1 LED red The detector contains radioactive materials. The operating
Sensitivity y = 0.8
instructions and current laws and regulations on radiation
protection must be observed.
Air ow max. 5 m/s
Radioactivity Am241 2.8 kBq
Approvals / marking
Electrostatic shielding existing
-20 C up to +60 C G 28107 0786-CPD-20211
Operating temperature
(-4 F to +140 F)
IP 43, with membrane plug and
IP rating (EN 60529)
sealing of the mounting holes
Enclosure material Polycarbonate white
Relative humidity max. 95%
(IEC721-3-3) Avoid condensation
Weight 230 g (0.5 lbs)
113 x 68 mm (DxH)
Dimensions
4.5 x 2.7 inch (DxH)
P31.311.150en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 15
Product Sheet | Detecon
Standard detectors
Heat detectors, conventional
WMX 1000D60 Order no.: 747866
Conventional combined differential and static head detector.
Designed for areas with rapid rise of temperature caused by
ames.
Heat detector with 2 temperature sensors for use in industrial
environments.
Technology conventional
Operating voltage 7.6 V - 13.2 V DC
Approvals / marking
Quiescent current approx. 0.07 mA G 27611 0786-CPD-20208
Alarm current approx. 15 mA
Alarm indication 1 LED red
Temperature class, rate of Class A1,
rise measurement acc. to EN54-5: 2000 / A1:2002
+54 C to +62 C
Static threshold value
(+129.2 F to +143.9 F)
Electrostatic shielding not required
-20 C to +50 C
Operating temperature
(-4 F to +122 F)
IP 23, with membrane plug and
IP rating (EN 60529)
sealing of the mounting holes
Enclousure material white polycarbonate
Relative humidity max. 95%
(IEC721-3-3) no condensation
Weight 140 g (0.3 lbs)
113 x 68 mm (DxH)
Dimensions
4.5 x 2.7 inch (DxH)
P31.311.210 - 1en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 16
Product Sheet | Detecon
Standard detectors
Heat detectors, conventional
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 17
Product Sheet | Detecon
Standard detectors
Detector accessories, conventional
Detector base metric, 3-pin Order no.: 903502
113 mm (D)
Dimensions
4.5 inch (D)
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 18
Product Sheet | Detecon
Standard detectors
Detector accessories, conventional
Included in delivery
1 packaging unit (50 Piece)
Note
Dust cover to be removed with detector servicing tool.
Technical specifications
Enclousure material PVC 0.4 mm (0.01 inch)
Colour orange
Weight 4 g (0.01 lbs)
80.5 x 23 mm (DxH)
Dimensions
3.2 x 0.9 inch (DxH)
Connection / mounting
Recommended cable J-Y (St) Y 2x2x0.8 mm, red
Technical specifications
Air ow
1 m (39 inch)/s to max. Note
20 m (787 inch)/s VdS approval only for bypass box with optical smoke detector
Detector slot 1 Detector base 5-pin OMX1001C.
Pipe for bypass detector
2 threaded pipes DN15 galvanized, An approval for the control of re damper does not exist.
540 mm (21.6 inch)
Enclousure material Aluminium diecast, grey
-20 C to +60 C
Approvals / marking
Ambient temperature
(-4 F to +140 F)
P31.311.710 - 2en / 01.14
IP rating IP 23 G 28406
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 19
Product Sheet | Detecon
Standard detectors
Optical smoke detectors, conventional
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 20
Product Sheet | Detecon
Standard detectors
Multisensor detectors, conventional
Approvals / marking
G 204040 0832-CPD-0036
P31.311.510en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 21
Product Sheet | Detecon
Standard detectors
Heat detectors, conventional
Alarm current
40 mA at 24 V Approvals / marking
20 mA at 12 V
Alarm indication 1 LED red
G 204033 0832-CPD-0029
Temperature class, Class A1,
rate of rise measurement acc. EN54-5: 2000 / A1:2002
+54 C to +62 C
Statically trip point
(+129.2 F to +143.6 F )
-40 C to +70 C
Operating temperature
(-40 F to +158 F)
IP rating (EN 60529) IP 23 D
Enclousure material white polycarbonate
Relative humidity max. 98%
(IEC721-3-3) no condensation
Weight 70 g (0.2 lbs)
100 x 42 mm (dia.xH)
Dimensions
3.9 x 1.7 inch (dia.xH)
P31.311.210 - 2en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 22
Product Sheet | Detecon
Standard detectors
Detector accessories, conventional
Detector base BAX ORB Order no.: 905564
100 mm (D)
Dimensions
3.9 inch (D)
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 23
Product Sheet | Detecon
Standard detectors
Optical smoke detectors, conventional, Ex
Dimensions
4.5 x 2.7 inch (DxH)
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 24
Product Sheet | Detecon
Standard detectors
Ionisation smoke detectors, conventional, Ex
IMX 1001E Ex Order no: 782410
Conventional ionisation smoke detector for Ex zone 1. Desi-
gned for use in areas with smoke in case of re.
Robust smoke detector with a dual ionisation chamber for
use in industrial environments.
Designed for use in hazard areas connected to a safety
barrier Ex Standard 9 V. The barrier has to be placed in non
hazard areas.
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 25
Product Sheet | Detecon
Standard detectors
Heat detectors, conventional, Ex
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 26
Product Sheet | Detecon
Standard detectors
Heat detectors, conventional, Ex
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 27
Product Sheet | Detecon
Standard detectors
Detector accessories
Back box for detector base for surface mounting, with lateral
cable entry for M20 cable glands. Stable ABS enclosure in
robust design.
Technical specifications
Material ABS
Weight 404 g (0.9 lbs)
146 x 38 mm (dia. x H)
Dimensions
5.8 x 1.5 inch (dia. x H)
Included in delivery
1 packaging unit (10 x)
Cable oor-detector holder BHX 1000
2 mounting screws 4.2 x 13 (DIN 7981-St)
Technical specifications
Material Sheet steel, powder-coated
Colour RAL 7035
-20 C to +70 C
Operating temperature
(-4 F to +158 F)
Weight 290 g (0.6 lbs)
112 x 330 mm (dia. x H)
Dimensions
4.4 x 13 inch (dia. x H)
P31.311.740en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 28
Product Sheet | Detecon
Standard detectors
Detector accessories
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 29
Product Sheet | Detecon
Standard detectors
Detector accessories
Junction box ACX 204 Order no.: 901247
Notes
Not applicable in combination with:
- detector base metric, 3-pin 903502
- detector base metric, 5-pin 903503
- and the associated detectors series
Notes
Not applicable in combination with:
- detector base metric, 3-pin 903502
- detector base metric, 5-pin 903503
- and the associated detectors series
Approvals / marking
P31.311.740en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 30
Product Sheet | Detecon
Standard detectors
Detector accessories, conventional,Ex
Junction box Ex Order no.: 900288
Included in delivery
1 Junction box Ex with 4 cable glands M25 for cable 10 -
17 mm and 2 closures M25.
6 clamps, clamping range to 2.5 mm2 (0.004 square inch)
Technical specifications
Material Polyamid
Not included in delivery
IP rating (EN60529) IP 66 Mounting hardware
Colour black
Operating temperature
-20 C to +40 C Approvals / marking
(-4 F to +104 F)
Ex conformity in acc. with 94/9/EG
Weight 300 g ( 0.66 lbs)
x II 2G Ex dem ia II, IIC T6
122 x 180 x 61 mm (WxHxD)
Dimensions EC type approval certicate: PTB 00 ATEX 3108
4.8 x 7.1 x 2.4 inch (WxHxD)
P31.311.730 - 2en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 31
Product Sheet | Detecon
Standard detectors
Modules, addressable, DIN rail mounting
Approvals / marking
G 210034 0832-CPD-1072
P31.311.810 - 3en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 32
Product Sheet | Detecon
Standard detectors
Modules, addressable, DIN rail mounting
Approvals
0832-CPD-0857
P31.311.810 - 1en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 33
Product Sheet | Detecon
Standard detectors
Modules, addressable, DIN rail mounting
Inputs : 1
Outputs : 1 (opto-isolator)
Approvals / marking
0832-CPD-0856
P31.311.810 - 4en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 34
Product Sheet | Detecon
Standard detectors
Modules, addressable, DIN rail mounting
Approvals / marking
0832-CPD-0854
P31.311.810 - 6en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 35
Product Sheet | Detecon
Standard detectors
Modules, addressable, DIN rail mounting
Inputs : 0
Outputs : 1
Approvals / marking
0832-CPD-0855
P31.311.810 - 12en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 36
Product Sheet | Detecon
Standard detectors
Modules, addressable, DIN rail mounting
Approvals / marking
G 201095 0832-CPD-0852
P31.311.810 - 14en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 37
Product Sheet | Detecon
Standard detectors
Modules, addressable, DIN rail mounting
35 x 99 x 114.5 mm (WxHxD)
Dimensions
1.4 x 3.9 x 4.5 inch (WxHxD)
Approvals / marking
G 209028
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 38
Product Sheet | Detecon
Standard detectors
Modules, addressable, wall mounting
Approvals / marking
G 201033 0832-CPD-0867
P31.311.810 - 2en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 39
Product Sheet | Detecon
Standard detectors
Modules, addressable, wall mounting
Approvals / marking
G 201033 0832-CPD-0866
P31.311.810 - 5en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 40
Product Sheet | Detecon
Standard detectors
Modules, addressable, wall mounting
Approvals / marking
G 201032 0832-CPD-0869
P31.311.810 - 7en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 41
Product Sheet | Detecon
Standard detectors
Modules, addressable, wall mounting
Inputs : 1
Outputs : 1
Approvals / marking
0832-CPD-0860
P31.311.810 - 8en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 42
Product Sheet | Detecon
Standard detectors
Modules, addressable, wall mounting
Inputs : 3
Outputs : 3
Approvals / marking
G 202052 0832-CPD-0864
P31.311.810 - 9en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 43
Product Sheet | Detecon
Standard detectors
Modules, addressable, wall mounting
Inputs : 0
Outputs : 1
Approvals / marking
G 201032 0832-CPD-0870
P31.311.810 - 13en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 44
Product Sheet | Detecon
Standard detectors
Modules, addressable, wall mounting
Approvals / marking
G 201095 0832-CPD-0871
P31.311.810 - 15en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 45
Product Sheet | Detecon
Standard detectors
Modules, addressable, wall mounting
Approvals / marking
G 201094 0832-CPD-0868
P31.311.810 - 16en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 46
Product Sheet | Detecon
Standard detectors
Modules, addressable, wall mounting
Approvals / marking
G 209028 0786-CPD-20684
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 47
Product Sheet | Detecon
Standard detectors
Modules, addressable
Notes
Technical specifications The SUX5000 AP can be used in combination with the
following devices:
Operating voltage 17 V - 28 V DC Universal card adapter SUX50 902698
Rated voltage 24 V DC Reed contact limit switch 886343
Float switch monitoring 879475
Quiescent current 230 A
Float switch monitoring pump house 842358
Operating current 300 A Pressure switch PM-3 792183
Integrated isolator no Pressure switch PM-10 810564
Pressure switch PMA-3 116512
-40 C to +80 C
Operating temperature
(-40 F to +176 F)
Technology / protocol Loop AP / XP95
Relative humidity 0 to 93%
(IEC721-3-3) no condensation
Weight 4 g (0.01 lbs)
38.5 x 28.5 x 8 mm (WxHxD)
Dimensions
1.5 x 1.1 x 0.3 inch (WxHxD)
Approvals / marking
G 208059 0786-CPD-20416
P31.311.810 - 17en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 48
Product Sheet | Detecon
Standard detectors
Modules, conventional
Connection / mounting
Connection cable 2-lead
Recommended cable, standard 747180
J-Y(ST)Y-2x2x0.8 mm
Conductor cross-section
max. 2.5 mm2 (0.004 square inch), solid conductor
max. 1.5 mm2 (0.002 square inch), strand with wire end
sleeve
Cable length max. 700 m (0.43 miles), at 0.8 mm
(0.03 inch) lead
Technical specifications
Number of leak detectors
max. 10
per line
-20 C to +60 C
Operating temperature
(-4 F to +140 F)
Weight 10 g (0.02 lbs) Approvals / marking
28 x 28 mm (LxB)
Dimensions
1.1 x 1.1 inch (LxB)
Connection / mounting
Connection cable 2-lead
Recommended cable, standard 747180
J-Y(ST)Y-2x2x0.8 mm
Conductor cross-section
max. 2.5 mm2 (0.004 square inch), dolid conductor
max. 1.5 mm2 (0.002 square inch), strand with wire end
sleeve
Technical specifications
Input voltage:
- Triggering 17 V - 29 V DC Approvals / marking
- Monitoring 0 V - 10 V DC
Ampacity max. 2 A
Rated capacity of the
max. 38 W
solenoid valve at 24 V
Display, triggering 1 LED red
-20 C to +60 C
Operating temperature
(-4 F to +140 F)
P31.311.820en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 49
Product Sheet | Detecon
Standard detectors
Modules, conventional
Connection / mounting
Recommended cable 2-lead
Conductor cross-section max. 2.5 mm2 (0.004 square inch),
solid conductor
Technical specifications max. 1.5 mm2 (0.002 square inch), exible wire with ferrule
Input voltage
- Activation 17 V - 29 V DC Note
- Monitoring 0 V - 10 V DC
Current carrying capacity max. 2 A To monitor and control the triggering, two control groups of
two different control group modules must be used.
Power rating of
max. 38 W
solenoid valve at 24 V
Anzeige, Ansteuerung 1 LED red
Operating temperature
-20 C to + 50 C Approvals / marking
(-4 F to +122 F)
Weight 10 g (0.02 lbs)
28 x 28 mm (LxW)
Dimensions
1.1 x 1.1 inch (LxW)
Connection / mounting
Connection cable 2-lead
Recommended cable, standard 747180
J-Y(ST)Y-2x2x0.8 mm
Conductor cross-section
max. 2.5 mm2 (0.004 square inch), solid conductor
max. 1.5 mm2 (0.002 square inch), strand with wire end
sleeve
-20 C to +60 C
Operating temperature
(-4 F to +140 F)
Weight 20 g (0.04 lbs)
80 x 40 mm (LxB)
Dimensions
3.2 x 1.6 inch (LxB)
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 50
Product Sheet | Detecon
Standard detectors
Modules, conventional
Connection / mounting
Connection cable 3-lead
Recommended cable, standard 747180
J-Y(ST)Y-2x2x0.8 mm
Conductor cross-section
max. 2.5 mm2 (0.004 square inch), solid conductor
Technical specifications max. 1.5 mm2 (0.002 square inch), strand with wire end
sleeve
Input voltage:
- Triggering 19 V - 29 V DC
- Monitoring 0 V - 10 V DC Approvals / marking
Ampacity max. 2 A
Display, triggering 1 LED red
-20 C to +60 C
Operating temperature
(-4 F to +140 F)
Weight 10 g (0.02 lbs)
28 x 28 mm (LxB)
Dimensions
1.1 x 1.1 inch (LxB)
P31.311.820en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 51
Product Sheet | Detecon
Standard detectors
Test equipment
Technical specifications
IP rating IP 20
+5 C to +45 C
Working temperature
(+41 F to +113 F)
-10 C to +50 C
Storage temperature
(+14 F to +122 F)
Relative humidity 0 to 85 %,
(IEC721-3-3) no condensation
Weight 750 g (1.7 lbs)
153 x 397 mm (WxH)
Dimensions
6 x 15.6 inch (WxH)
P31.311.911en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 52
Product Sheet | Detecon
Standard detectors
Test equipment
Technical specifications
Battery charging time 75 - 90 min.
Battery baton 7.2 V 2.2 Ah NiMH
IP rating IP 20
+5 C to +45 C
Working temperature
(+41 F to +113 F)
-10 C to +50 C
Storage temperature
(+14 F to +122 F)
Relative humidity 0 to 85 %,
(IEC721-3-3) no condensation
Weight 1250 g (2.8 lbs)
153 x 397 mm (WxH)
Dimensions
6 x 15.4 inch (WxH)
P31.311.911en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 53
Product Sheet | Detecon
Standard detectors
Test equipment
Technical specifications
Max. working height approx. 6 m (236 inch)
+10 C to +35 C
Working temperature
(+50 F to +95 F)
- 10 C to +50 C
Storage temperature
(+14 F to +122 F)
Weight 2210 g (4.9 lbs)
100 x 1290 mm (dia. x L)
Size of bag for telescopic poles
3.93 x 50.78 inch (dia. x L)
510 x 440 x 270 mm (WxHxD)
Size of device bag
20.1 x 17.3 x 10.6 inch (WxHxD)
P31.311.911en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 54
Product Sheet | Detecon
Standard detectors
Test equipment
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 55
Product Sheet | Detecon
Standard detectors
Test equipment
Technical specifications
Capacity 50 tests, 30 seconds each
Rapid battery charge 75 - 90 minutes
+5 C to +45 C
Working temperature
(+41 F to +113 F)
-10 C to +50 C
Storage temperature
(+14 F to +122 F)
Relative humidity 0 to 85 %,
(IEC721-3-3) no condensation
Weight 1100 g (2.4 lbs)
135 x 330 mm (dia. x L)
Dimensions
5.3 x 13 inch (dia. x L)
P31.311.911en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 56
Product Sheet | Detecon
Standard detectors
Test equipment
Smoke & heat detector test kit S823 Order no.: 906948
The complete device kit includes everything needed for
removing, replacing and testing smoke and heat detectors.
Extendable breglass poles are for testing and installing
detectors up to a height of approx. 9,3 m (366 inch).
By adjusting the three-point gripper a six-stage division for
different detector diameters is possible.
The detector test is carried out completely ame-free through
the use of a warm stream of air horizontal to the testing head
cup. This stream of air comes into direct contact with the
sensor chamber, allowing the detector's alarm to be triggered
rapidly and in a reproducible manner.
The smoke detector testing device can be used with the
SA3 aerosol for all smoke detectors. The test aerosol is
released by touch, with a patented membrane allowing the
Product features efcient use of the aerosol.
The aerosol is designed for use with the smoke detector
Universal gripper for removing / mounting detectors.
testing device to test ionisation and optical smoke detectors.
Heat detector test, battery-operated, without an open Features of the aerosol include reliable test triggering of
ame. the detectors, residue-free use, rapid clearing and low
Telescopic poles for working heights of up to 9.3 m consumption.
(366 inch).
Smoke detector tester for optical and ionisation smoke Included in delivery
detectors. 3 telescopic poles 1.1 m (43.30 inch)
1 telescopic pole 4.5 m (177.16 inch)
Technical specifications 1 detector removal tool
Adjustment range 65 mm to 110 mm 1 smoke detector testing device
of three-point gripper (2.56 inch to 4.33 inch)
Dimensions of heat detector 135 x 330 mm (dia. x L) 1 heat detector testing device
tester 5.3 x 13 inch (dia. x L) 2 batteries
Capacity heat detector tester 50 tests, 30 seconds each 1 rapid charger 220/240 V AC; 12 V DC
Rapid battery charge 75 - 90 minutes 2 carrying bags
Max. working height approx. 9.3 m (366 inch)
+10 C to +35 C
Working temperature
(+50 F to +95 F)
-10 C to +50 C
Storage temperature
(+14 F to +122 F)
Relative humidity 0 to 85 %,
(IEC721-3-3) no condensation
Weight 3300 g (7.3 lbs)
100 x 1290 mm (dia. x L)
Size of bag for telescopic poles
3.93 x 50.78 inch (dia. x L)
510 x 440 x 270 mm (WxHxD)
Size of device bag
20.1 x 17.3 x 10.6 inch (WxHxD)
P31.311.911en / 01.14
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 57
Product Sheet | Detecon
Standard detectors
Test equipment
Note
This procedure is a substit for a coarse heat test, as the
release resistance is adapted to the specic type and a
detector would not respond if the heat detector or any other
important component is defective.
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 58
Product Sheet | Detecon
Standard detectors
Test equipment, accessories
Material PU foam
Gaseous combustion products:
Carbon dioxide,
Carbon monoxide 1.55 Vol.%, 1.21 Vol.% Not included in delivery
Methane, Ethane 0.41 Vol.%, 0.02 Vol.% Base e.g. aluminium foil
Propane, Ethylene 0.01 Vol.%, 0.21 Vol.%
Propylene, Acetylen 0.11 Vol.%, 0.03 Vol.%
Hydrochlorid acid,
Note
Fluoride acid not
Customers permission for burning the mat required. Aerosols
Nitrous gases 0.035 mg/l may effect electronic devices. Pollution of magnetic mass
Ammonia and Organic bases, storages.
traces of Hydrocyamic acid 0.16 mg/l
P31.311.914en / 02.13
Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com | Chapter 5 - 59