Sei sulla pagina 1di 7

Internal Audit of

ISO 9001:2015
Quality Management System

Examination Paper

Company : ___________________________

Name :

Department :

Date : ___________

INSTRUCTIONS:

1. Please answer all questions in 30 minutes.


2. Mark your answer at the appropriate space on your answer sheet with 2B pencil. Only ONE (1)
answer shall be marked for each question.
3. Follow the instructions of the test controller and stop writing when you are told to do so.
4. Test paper along with answer sheet must be returned at the end of the test.
Internal Audit of ISO 9001:2015 Quality Management System Training Course- Post-training Examination

1. Which of the following best describe ISO 9001:2015?

(I) Quality management systems- requirements


(II) Intended to be used in conjunction with ISO 14001 environmental management system
(III) ISO 9001 is certifiable by accredited certification bodies
(IV) ISO 9001 is only applicable to manufacturers, regardless of size or complexities

a. I & III
b. II & III
c. I & II
d. I, II & IV

2. Combination of internal and external issues that can have an effect on an organizations approach to
developing and achieving its objectives is the definition of

a. Context of the organization


b. Business environment
c. Quality policy
d. Quality management system

3. Systematic, independent and documented process for obtaining objective evidence and evaluating it
objectively to determine the extent to which the audit criteria are fulfilled is the definition of

a. Audit
b. Internal inspection
c. Laboratory testing
d. Internal audit procedure

4. Mandatory documented information required by ISO 9001:2015 standard includes

(I) Scope of the quality management system


(II) Quality objectives
(III) Design and development changes
(IV) Maintenance of infrastructure

a. I, II & IV
b. I, II & III
c. II, III & IV
d. I, II, III & IV

5. In what clause of ISO 9001:2015 standard is the requirement for conducting internal audit specified?

a. Clause 4 Context of the organization


b. Clause 5 Leadership
c. Clause 8 Operation
d. Clause 9 Performance evaluation

Page 2 of 7
Internal Audit of ISO 9001:2015 Quality Management System Training Course- Post-training Examination

6. Audit is a systematic, independent and documented process for obtaining objective evidence and evaluating
it objectively to determine the extent to which the audit criteria are fulfilled. Which are the following can be
used as objective evidence?

(I) Training attendance records


(II) Supplier evaluation records
(III) Customer satisfaction survey reports
(IV) Quality objective reports

a. I & II
b. I & IV
c. II & IV
d. All of the above

7. Audit criteria include

(I) ISO 9001:2015 standard


(II) Customer contract requirements
(III) Quality manual
(IV) Operating procedures

a. I, II & III
b. I, II & IV
c. II, III & IV
d. I, II, III & IV

8. audit shall be performed at planned intervals by internal auditors of the


organization implementing ISO 9001:2015 quality management system. Please fill in the blank with the best
answer.

a. Site
b. Annual
c. Internal
d. Supplier

9. Purpose of conducting internal audits includes the following EXCEPT

a. To check compliance of the quality management system against ISO 9001:2015 requirements
b. To check improvement needs
c. To raise non-conformance report for areas not complied to the ISO 9001:2015 standard
d. To check effectiveness of the quality management system

10. Extent and boundaries of an audit are defined as

a. Audit scope
b. Audit criteria
c. Audit Evidence
d. Audit schedule

Page 3 of 7
Internal Audit of ISO 9001:2015 Quality Management System Training Course- Post-training Examination

11. Which of the following are the principles of auditing?

(I) Ethical conduct


(II) Evidence based approach
(III) Due professional care

a. I & II
b. II & III
c. I, II & III
d. I & III

12. As long as a piece of critical monitoring equipment is periodically examined by the operators who know and
use it, a formalized maintenance and calibration program is not necessary, TRUE or FALSE?

a. True
b. False

13. In preparing for an audit, one of the key points in an audit team selection is:

a. Selecting all qualified lead auditors


b. Ensuring one of the auditors is in a senior management position
c. Selecting auditors who are independent of the area to be audited
d. Having the team leaders choose the people they like to work with

14. ISO 9001:2015 Quality management principles includes

(I) Leadership
(II) Process approach
(III) System approach
(IV) Customer focus

a. I, II & III
b. II, III & IV
c. I, II & IV
d. I, III & IV

15. Which of the following suppliers require controls to ensure quality requirements have been met?
(I) Office stationery products
(II) Bulk materials
(III) Transporter
(IV) Third party warehouse

a. I, II & III
b. II, III & IV
c. I, III & IV
d. I, II & IV

Page 4 of 7
Internal Audit of ISO 9001:2015 Quality Management System Training Course- Post-training Examination

16. QC inspection programs shall be established to monitor and measure conformity of products. Which of the
following shall be inspected during internal audit?

(I) Name of the QC inspector


(II) Inspection methods and frequency
(III) Inspection records
(IV) Location of QC laboratory

a. I, II & III
b. I, II & IV
c. I, III & IV
d. II, III & IV

17. During site audit on proper storage of raw materials, which of the following storage conditions complies with
the ISO 9001:2015 requirements?

a. Areas near to the production machines


b. Storage areas with proper identification of raw materials
c. Outside the factory
d. In the office

18. Which of the following best define Corrective Action?

a. Action to eliminate a detected nonconformity


b. Action to eliminate the cause of a nonconformity and to prevent recurrence
c. Investigate root cause of a detected nonconformity
d. Segregate non-conforming item to reject area

19. A third party audit is

a. An internal audit
b. An audit by customer or client
c. An audit by an independent organization
d. All of the above

20. Please arrange the following according to the correct internal audit steps

(I) Carry out internal audit according to audit schedule


(II) Prepare audit schedule and select internal auditors
(III) Take corrective action on non-conformance raised during audit
(IV) Conduct closing meeting to summarize audit findings

a. II, IV, I, II
b. II, I, IV, III
c. IV, II, I, III
d. III, I, II, IV

Page 5 of 7
Internal Audit of ISO 9001:2015 Quality Management System Training Course- Post-training Examination

21. Auditor shall not audit their own works or areas of responsibilities, TRUE or FALSE?

a. True
b. False

22. Which of the following can be used to check quality compliance of raw materials?

(I) Test reports/ certificate of analysis provided by supplier for each batch of materials
supplied
(II) ISO 9001 certificates from supplier proving the supplier compliance with ISO 9001
standards
(III) Incoming material inspection records
(IV) Material delivery order

a. I & II
b. II & III
c. II & IV
d. I & III

23. Evidence that can be audited to verify the implementation and effectiveness of trainings conducted includes:

(I) Training attendance records


(II) Training effectiveness evaluation records
(III) Certificates of attendance
(IV) Training plan

a. I & II
b. I & III
c. II & III
d. I, II, III & IV

24. Corrective action shall be carried out whenever a complaint from customer is received. As an internal auditor,
how do you check if proper action has been taken to solve the complaint issues?

a. By checking the customer complaint record indicating root cause of complaint, corrective action
taken and verification of action taken
b. By interviewing the sales personnel on customer feedback pertaining to the complaint issues
c. Contact the customer to verify if the complaint issue has been solved
d. By checking the management review meeting minutes to confirm the complaint has been
discussed and solved

25. Which of the following DOES NOT comply with the good storage requirements?

a. Store on pallet or racking


b. Mix raw material and finished product as long as all items are packed properly
c. Label raw material
d. Store room is clean and well ventilated

Page 6 of 7
Internal Audit of ISO 9001:2015 Quality Management System Training Course- Post-training Examination

26. Internal audit shall be conducted?

a. At planned intervals
b. Once a year
c. Whenever changes to the quality management system occur
d. Prior to the surveillance audit by certification body

27. ISO 9001:2015 requirements include

a. Health and safety requirements


b. Operational planning and control
c. Quality costing
d. All of the above

28. Which of the following are required to enable traceability of finished product?

(I) Label raw materials with receiving date and batch number
(II) Record production activities including materials used in job sheets
(III) Conduct mock recall on a yearly basis
(IV) Maintain finished product delivery records

a. I, II & III
b. I, III & IV
c. I, II & IV
d. II, III & IV

29. What information is being sought during a third party audit of a quality management system?

a. A list of nonconformities to ISO 9001:2015


b. Objective evidence of conformity with ISO 9001:2015
c. A management commitment to quality assurance
d. All of the above

30. To act as an internal auditor of a quality management system a person has to

(I) Be registered as a certificated auditor


(II) Have undergone a formal ISO 9001:2015 internal audit training
(III) Be independent from the areas to be audited
(IV) Have been a quality system manager

a. I & II
b. II & III
c. I, II & III
d. II, III & IV

Page 7 of 7

Potrebbero piacerti anche