Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Specification Data SE/WT 140 SE/WT 200 SE/WT 300 SE/WT 400 SE/WT 500
Power Type 1 1 2 2 2
Protection Class IP 21 IP 21 IP 21 IP 21 IP 21
Insulated Class F F F F F
Input Voltage 230 V 230 - 420 V 420 V 420 V 420 V
Open Circuit Voltage 50 V 80 V 80 V 80 V 80 V
Regulation Field 70 - 140A 50 - 200A 80 - 300A 100 - 400A 118 - 500A
Current Amps 140A 200A 315A 400A 500A
Rated Input Capacity 10 KVA 11 KVA 23 KVA 30 KVA 35 KVA
Frequency 50 - 60 Hz 50 - 60 Hz 50 - 60 Hz 50 - 60 Hz 50 - 60 Hz
Weight (kg) 38 75 130 132 170
Dimension (H x D x W) 41x27x30 cm 54x46x32 cm 68x52x36 cm 68x52x36 cm 68x52x36 cm
Output rating (High Current range)
Duty Cycle (25%) 25V/ 140A - - - -
Duty Cycle (40%) - 28V/ 220A 23V/ 320A 36V/ 400A 33V/ 500A
Duty Cycle (100%) 23V/ 70A 24V/ 100A 26 / 165A 29V/ 230A 27V/ 350A
Output rating (Low current range)
Duty Cycle (44%) - 26V/ 150A 30V/ 250A 34V/ 300A 31V/ 440A
Duty Cycle (100%) - 23V/ 30A 25V/ 125A 26V/ 125A 23V/ 230A
Order No. 2070903140 2070903200 2070903300 2070903400 2070903500
LB4/500 AC 415V / 50Hz 100 Ampere < 24 Volts < 0.06s < 500 21x10x0.9 cm 1.20
3.01
DISTRIBUTED BY:
WELICHI
WELICHI WELDING MACHINES
WELDING MACHINES
AC/DC Arc Welding Machine
Specification Data ZT/ZXEI-400 Duty Cycle 35%
Input Power (Volt) 380V/ 50~60Hz Rate Input Capacity 30KVA
A/C Rated current 400A Insulation Grade F
D/C Rated current 315A Weight 155kg
A/C Current range 75-400A Size 70/46/80 cm
D/C Current range 60-315A Order No 2070908400Z
Water Cooler
Specification Data ZT/LX20T
Input Power (Volt) 220V/1ph/50Hz
Rated power 120W
Rated water capacity 20L
Dimension (mm) 600 x 360 x 625
Weight (Kg) 30
Order No. 2070960120Z
3.02
DISTRIBUTED BY:
WELICHI WELDING MACHINES
MIG Welding Machine (Compact Unit) - IGBT Inverter
Specification Data XD/NBC-218C XD/NBC-315C
Input Power 200 V/1ph/50Hz 415 V/3ph/50Hz
Rated Power (KVA) 9.3 11.7
NBC-315
Output Current Adjustment (A) 50 ~ 200 50 ~ 315
Output Voltage Adjustment (V) 16.5 ~27.5 16.5 ~29.8
Duty Cycle 60 60
Efficiency (%) 85 80
Welding Wire Diameter 0.8 ~ 1.0 0.8 ~ 1.0
Protection/ Insulation Level IP21/ F IP21/ F
Weight 24 25
Dimensions (Machine) 500 x 275 x 430 500 x 275 x 430
Order No. 2070931218X 2070931315X
3.03
DISTRIBUTED BY:
WELICHI WELDING MACHINES
MMA DC Arc IGBT Inverter
Features:
1. Adopted with advance adverse inverter technology with imported IGBT, single tubes frequency
up to 20 KHz. Produce quick dynamic response, good performance, high reliability, meeting
high quality welding requirements.
2. No load power consumption is less than 100 Watts, saving 50% of electricity compared with
traditional welding machines.
3. Suitable for welding of low and medium carbon steels, alloy steel and all other ferrous and
non-ferrous metals.
4. Widely used in petroleum and chemical industries, ship-building, auto-mobile, electric and
nuclear power construction, industrial installation, bridge and civil construction and others.
3.04
DISTRIBUTED BY:
WELICHI WELDING MACHINES
TIG/ MMA DC IGBT HF Inverter
Feature:
1. Adopting MOSFET Inverter technology with updated electronic circuit design, lower power
supply thereby saving energy.
2. The welding current is displayed on the LED panel and presented a clear and visible current.
3. High frequency Arc initiation makes the work of TIG welding easier.
4. Suitable for welding stainless steel, carbon steel, alloy steel and other metals.
XD/WS
Specification XD/WS-200 XD/WS-250 XD/WS-315 XD/WS-400
-250
Power (V/ Hz) AC 22015%/50 AC 41515%/50 AC 41515%/50 AC 41515%/50
Input Power (KVA) 7 12.7 12.8 18
Unload Voltage (V) 56 70 70 70
Output Current (A) 10-200 10-250 10-315 20-400
Duty Cycle (%) 35 60 60 60
Power Loss (Watt) 40 60 60 60
Efficiency (%) 80 80 80 80
Insulation Level F F F F
Weight (kg) 9.5 14 14 25
Welding Rod (mm) 1.6 - 3.2 1.6 - 4.0 1.6 - 4.0 1.6 - 5.0
Plate thickness (mm) 0.3 - 5 0.5-10 0.5-10 0.5 - 18
Overall size (mm) 371 x 153 x 300 471 x 202 x 375 471 x 202 x 375 565 x 306 x 432
Order No. 2070923200X 2070923250X 2070923315X 2070923400X
3.05
DISTRIBUTED BY:
WELICHI WELDING MACHINES
TIG AC/ DC IGBT Inverter
1. Model XD/WES-200 & XD/WSE-315
With square wave IGBT module deliver better efficiency with compact size, light weight and
stable welding with focus and concentrated arc for good and easy weed penetration and have
built in thermostat for protection and safety
2. Model ZT/WMSE-500
Uses Siemens Pulse Arc IGBT module for higher efficiency, enable deep penetration welds.
Electronic control interface with digital reading, provide easier adjustment, simple and precise
welding process.
This multifunction features are suitable for carbon steel, alloy steel, stainless steel, copper,
aluminium and titanium welding.
3.06
DISTRIBUTED BY:
WELICHI WELDING MACHINES
MIG Welding Machine (Split Unit Series) - Thyristor Machine
WELICHI TW/NBC-TKIII Series SCR MIG/ MAG Thyristor Welding Machines
have more than 96% successful arc ignition, developed by us technically.
Combined with following features :
Automatic Arc length, Compensation function
Stable arc combustion, low spatter, Excellent weld.
Voltage compensation circuit guarantee the consistent of weld joint
when voltage variation rate is within 10%
Ideal dynamic characteristics
Strong arc and deep penetration with high quality weld joint.
Technical Data
Model TW/NBC-200TKIII TW/NBC-350TKIII TW/NBC-500TKIII TW/NBC-630TKIII
Input Voltage/ Frequency Three Phase 380V 10%/ 50 Hz
Rated Input Current (A) 11 28.1 48.4 70
Rated Input Power (KVA) 7.3 18.5 32 46
Rated No-Load Voltage (V) 33 50 65 76
Rated Output Voltage (V) 24 32 39 44
Adjustment range of output Voltage (V) 14-24 15-35 16-45 16-45
Adjustment range of output Current (A) 40-200 60-350 80-500 80-630
Wire Feeding Speed Range (M/ min) 2-25 2-25 2-25 2-25
Wire Diameter (mm) 0.8/ 1.0 0.8/ 1.0/ 1.2 1.2/ 1.4/ 1.5 1.2/ 1.6
Suitable Welding Specifications Solid Core/ Flux Core
Wire feed type Push Wire
Welding gun cooling method Gas Cooling
Rated duty cycle (%) 60%
Efficiency 0.85
Power Factor 0.9
Insulation Grade F
Shell Protection Grade IP21S
Cooling method Air Cooling
Dimension L x W x H (mm) 700 x 385 x 760 700 x 440 x 780 700 x 525 x 875
Net Weight (Kg) 100 125 157 217
Order No 2070935200TKT 2070935350TKT 2070935500TKT 2070935630TKT
Configuration Instructions
Arc Welding Power TW/NBC-200TKIII TW/NBC-350TKIII TW/NBC-500TKIII TW/NBC-630TKIII
Accessories : Qty Model Qty Model Qty Model Qty Model
KR200 KR350 KR500 KR630
Wire Feeding Device 1 set 1 set 1 set 1 set
(negative) (negative) (negative) (negative)
Welding Torch 1 set QTB-200,5M 1 set QTB-350,5M 1 set QTB-500,5M 1 set QTB-500,5M
HLCO2, HLCO2, HLCO2, HLCO2,
Heater 1 pc 1 pc 1 pc 1 pc
Good Quality Good Quality Good Quality Good Quality
Ground Cable 1 pc YH25,3M 1 pc YH35,3M 1 pc YH50,3M 1 pc YH70,3M
Glass Insurance Tube 1 pc 8A, 6 x 30 1 pc 8A, 6 x 30 1 pc 8A, 6 x 30 1 pc 8A, 6 x 30
Glass Insurance Tube 1 pc 2A, 6 x 30 1 pc 2A, 6 x 30 1 pc 2A, 6 x 30 1 pc 2A, 6 x 30
Clamp 2 pcs 12 2 pcs 12 2 pcs 12 2 pcs 12
Cold Rolling Terminals 2 pcs SC25-10 2 pcs SC35-10 2 pcs SC70-10 2 pcs SC95-10
Connector 2 pcs Binzel Type 2 pcs Binzel Type 2 pcs Binzel Type 2 pcs Binzel Type
DISTRIBUTED BY:
WELICHI WELDING MACHINES
MMA/TIG/PLASMA DC IGBT Inverters (MINI)
Features:
1. Adopt advanced IGBT Inverter technology, high efficiency and powerful switch design.
2. Compact, handy, smallest and lightest Inverters (except SE/ZX7 200)
3. Lower welding spatter and perfect arc stability.
4. Air cooling & auto overload protection.
5. Can be used with all types of electrodes: rutiles, basic, stainless steel & cast iron.
6. Easy maintenance & service.
7. Extensively used in all fields of welding especially at extreme high heights and good
HIGH PERFORMANCE WITH portable DIY unit.
IGBT TECHNOLOGIES (8. PLASMA-50P Inverter with built-in Compressor)
Arc Starting - - -
N.W (kgs) 2.7 3.0 3.2
G.W (kgs) 2.9 3.2 3.4
Dimensions (mm) 159x142x215 164x156x240 174x161x256
*Accessories Yes Yes Yes
Order No. 2070911026N 2070911032N 2070911040N
* Remarks: For MINI-2/3/4-Electrode holder x 2.0M and earth clamp x 1.5M Welding cable;
For PLASMA-50P-Torch and Earth Clamp x 1.5M Welding cable
3.07
DISTRIBUTED BY:
WELICHI CNC CUTTING MACHINE
CNC Cutting Machine
WELICHI CNC cutting machine can be easily operated like a printer and threw off the restriction
of CNC technique. Only need a common computer which has both Windows XP system and
Welichi CNC System software, we can connect it to the WELICHI Cutting Machine by USB
interface and operate the machine to cut any complex 2D graphics on steel plate.
With industrial Vup CNC system, which replace the Commercial All-In-One PC, the Welichi CNC
Cutting Machine has the same function as Gantry CNC Cutting Machine.
Hand-held remote Controller,easy and safe operation.
The cross beam can adjust itself automatically and always keep 900 angle with the guide rails
when the machine turns on every time.
Through-type lifting Rail Clearing
for cutting torch apparatus Guide rails are made of ball bearing steel after heat treatment and precise grinding. They were
chrome faced and durable.
Cross beams adopt aluminium alloy draw forming technology, volume production, light weight,
high consistency and durability.
Vup Cutting Lengthened
Trolley structure
Adopts through-type lifting structure and the lifter running uses ball screw. The torch never
System
shake during lifting.
Model HBB I HBB II HBB III
Technical Index
Cutting Mode Oxy-Fuel Plasma Oxy-Fuel and Plasma
Track Span 3m / 4m
Guide Rail Standard Length is 6m, can be extended every 3m
Effective Cutting Size Width: 2.5m/3.5m; Length: 5m, can be extended every 3m
Torch No 1 set of Oxy-Fuel torch 1 set of Plasma torch Both Oxy-Fuel & Plasma torches
Driving Mode AC Servo system dual drives, 400W*3
Torch Height Control Motorized THC for Oxy-Fuel torch Arc voltage THC and anti-collision
Cutting Gas Oxy-Fuel: Oxygen + Acetylene or Propane; Plasma: Compressed Air, Oxygen
Cutting Thickness Oxy-Fuel: 6-150mm Plasma: 2-18mm (CutmasterA120 capacity)
Speed Regulation 0-21000mm/min
CNC System Same function as Gantry CNC system
File Transfer USB
Running Control All-In-One PC/ Vup system control / hand-held remote controller
Input Voltage 220V/380V, 110V/460 Universal
Options Oxy-Fuel: Capacity THC and Auto-ignition;
Plasma: Recommend Hyperthermia and Thermadyne Plasma
Order No 2070900001D 2070900002D 2070900003D
3.08
DISTRIBUTED BY:
WELICHI DRYERS/WELDING OVEN
/ARC GOUGING TORCH
Portable Welding Electrode Dryer
WELICHI Dryers are simple-constructed, trouble-free, light-weight, upright, inexpensive and
power-saving with high heating efficiency. Installed with direct-heating Heater to gain maximum
capacity within the internal casing and power saving by 40% compared with conventional types.
Thermostat adjustment between room temperature to 320 c can be easily operated.
WIN 50 2070900200 WIN 200 - 890 x 550 x 660 200 - 220 0 - 400 c
WIN 100 415 v
WIN 200 2070900300 WIN 300 - 1000 x 750 x 660 3 Ph 300 - 350 0 - 400 c
WIN 300 50Hz
WIN 500
2070900500 WIN 500 - 1200 x 1000 x 660 500 - 550 0 - 400 c
3.16
DISTRIBUTED BY:
WELICHI WELDING ACCESSORIES
Cable Connectors
Suitable for use either copper or aluminium cable, providing a quick, watertight fitting of cables on
site. Two methods of cable fixing are available , either by grub screws and copper ferrule or by a
gland pressure nut retaining the cable against a machined cone.
3.17
DISTRIBUTED BY:
WELICHI WELDING ACCESSORIES
Square Welding Hand Shield
The Square Welding Hand Shield is nice to have where only need to do few welding activities
or for they who do not need the full fire power of a complete helmet. This protector designed as
a foldable equipments, light weight and useful for DIY-er home owner.
Bundled with welding eye protection glass.
The polypropylene helmets meet the ANSI Standards for welding Helmets Z87.1-1989.
Cable Lugs
WELICHI Cable Lugs are copper and tinted for clamping, soldering, or hammer-on type.
Chipping Hammer
2071154103 All steel with spring taper handle, hard forged head and bright plated finish or painted.
Order No. Description
2071154103 Steel Chipping Hammer - Silver (300gm)
2071154105 2071154105 Steel Chipping Hammer - Black (500gm)
Wire Brushes
For cleaning before welding and also de-slagging. Tampered wire bound to sturdy wooden backs.
Order No. Description
2072253124 4-Row Steel Wire Brush
2071011512
2071011510
Leather Welding Hand Gloves
Order No. Descriptions
2071011514 35 cm Welding Hand Gloves - Green Special Thick
2071011512 30 cm Welding Hand Gloves - Blue Heavy Duty
2071011510 25 cm Welding Hand Gloves - Fine Grey for TIG
2071011514 2071011612 2071011612 25 cm Welding Hand Gloves - Leather/ Cotton
3.18
DISTRIBUTED BY:
WELICHI MIG WELDING GUN
BZL Classic Ergo MIG Torch Range
Designed, Specified and built to exceed the norms associated with original products the Classic
Ergo range is built from parts produced to the highest international standards and comes fully
featured.
Handles and Cable Supports
A patented screw less design combines the ultimate in balance, positioning and ergonomics.
Torch handles disassemble in 5 seconds for rapid fault analysis.
Air Cooled Cable Systems
Hyperflex air cooled cable assemblies offer outstanding flexibility and the highest heat and
abrasion resistance of any known cable.
Cable end and crimp systems ensure maximum conductivity whilst the outer jacket is
constructed from cross-linked polymers providing a tear proof jacket with a burn threshold of
375C.
Water Cooled Cable Systems
Liquid cooled cables are produced from PVC and housed in a tough cloth reinforced outer jacket.
Unique cable end geometries ensure maintenance free service.
Hanger Hooks
A plug and play option, they encourage the operator to hang the torch off the ground where it is
easy to locate.
Housings, Nuts and Supports
Tough and damage resistant housings and nuts are formed in robust glass reinforced polymers
encasing all conductive parts in accordance with EN60974-7 and CCC.
Terminations
A comprehensive range of alternate rear ends ensures worldwide compatibility.
All WELICHI Euro Bodies are fitted with unbreakable spring loaded gun plug body pins as standard.
Specifications Data
Model UB150A UB240A UB250A UB360A UB240W UB401W UB501W UB250A
Auto
Cooling Method Air Air Air Air Water Water Water Air
Cooled Cooled Cooled Cooled Cooled Cooled Cooled Cooled
Rating: CO2 180A 250A 230A 300A 300A 400A 500A 230A
Mixed Gas 150A 220A 200A 270A 270A 350A 450A 200A
Duty Cycle: 60% 60% 60% 60% 100% 100% 100% 60%
Wire Size: 0.6 - 1.0 0.8 - 1.2 0.8 - 1.2 0.8 - 1.2 0.8 - 1.2 0.8 - 1.2 1.0 - 1.6 0.8 - 1.2
Min. Water Flow - - - - 1.2L/min. 1.2L/min. 1.2L/min. -
Min. Water Inlet Pressure - - - - 2.0 Bar 2.0 Bar 2.0 Bar -
Min. Cooling Requirements - - - - 900W 1000W 1100W -
Max Water Inlet Pressure - - - - 5.0Bar 5.0Bar 5.0Bar -
Max Water Inlet Temperature - - - - 500C 500C 500C -
Note: Guns are available in 3 metres, 4 metres and 5 metres. Please specify the length you required when placing an order.
Contact Tips
Nozzles
3.19
DISTRIBUTED BY:
WELICHI WELDING HELMET
Classic WLD TIG Torch Range
Recognized as the global standard, the Welichi WLD programme is fully Weldcraft compatible.
Torch Packages
Specific ranges are configured for European, British and American markets.
Offered in standard, flexible , valve, flexi-valve and pencil torch body options.
Torch Bodies
High temperature resistant rubber provides light weight and durable outer covers, cooper
components ensure cooler running temperatures.
Handles/Switches
Offered in knurled and ribbed either with snap on or rubber boot options.
Switches offered in momentary, latching and lever options.
Cable Systems
Air and water cooled cable assemblies are offered in high performance rubber or PVC.
Unique cable end crimp systems ensure trouble free terminations.
Rear End Terminations
An extensive range of alternate terminations ensures worldwide compatibility.
Specifications Data
Model WP 9 WP 17 WP 26 WP 24W WP 20 WP 18 WP 185C
Cooling Method Air Air Air Water Water Water Water
Cooled Cooled Cooled Cooled Cooled Cooled Cooled
Rating: DC 110A 135A 180A 180A 225A 380A 410A
AC 80A 95A 125A 125A 160A 270A 290A
Duty Cycle: 35% 35% 35% 60% 60% 60% 60%
Electrode Size: 1.0 - 2.4 1.0 - 3.2 1.0 - 4.0 0.5 - 2.4 1.0 - 3.2 1.0 - 4.0 1.0 - 4.8
Min Water Flow - - - 0.9L/min 1.0L/min 1.0L/min 1.0L/min
Min Water Inlet Pressure - - - 2.0 Bar 2.0 Bar 2.0 Bar 2.0 Bar
Max Water Inlet Pressure - - - 5.0Bar 5.0Bar 5.0Bar 5.0Bar
Max Water Inlet Tempertaure - - - 500C 500C 500C 500C
Min cooling power - - - 600W 700W 900W 1000W
Note: TIG Torches are available in 12 Ft or 25 Ft. Please specify the length you required when placing an order.
Collet
Ceramic Cup
3.20
DISTRIBUTED BY: