Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Wireless
Sound Bar
MODELS
SH4 (SH4, SPH5B-W)
SHC4 (SHC4, SPH5B-W)
*MFL69465052* www.lg.com
2 Getting Started
CAUTION: TO REDUCE THE RISK OF ELECTRIC Install in accordance with the manufacturers
SHOCK DO NOT REMOVE COVER (OR BACK) instructions.
NO USER-SERVICEABLE PARTS INSIDE REFER Slots and openings in the cabinet are provided
SERVICING TO QUALIFIED SERVICE PERSONNEL. for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
This lightning flash with arrowhead The openings shall be never be blocked by placing
symbol within an equilateral the product on a bed, sofa, rug or other similar
triangle is intended to alert the surface. This product shall not be placed in a built-
user to the presence of uninsulated in installation such as a bookcase or rack unless
dangerous voltage within the proper ventilation is provided or the manufacturers
products enclosure that may be of instruction has been adhered to.
sufficient magnitude to constitute
a risk of electric shock to persons.
CAUTION concerning the Power Cord
The exclamation point within an
Check the specification page of this owners manual
equilateral triangle is intended
to be certain of the power requirements for this
to alert the user to the presence
device. Check the specification page of this owners
of important operating and
manual to be certain. Do not overload wall outlets.
maintenance (servicing)
Overloaded wall outlets, loose or damaged wall
instructions in the literature
outlets, extension cords, frayed power cords, or
accompanying the product.
damaged or cracked wire insulation are dangerous.
WARNING: This product contains chemicals known Any of these conditions could result in electric
to the State of California to cause cancer and birth shock or fire. Periodically examine the cord of your
defects or other reproductive harm. Wash hands appliance, and if its appearance indicates damage
after handling. or deterioration, unplug it, discontinue use of the
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK appliance, and have the cord replaced with an exact
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN replacement part by an authorized service center.
OR MOISTURE. Protect the power cord from physical or mechanical
CAUTION: The device shall not be exposed to water abuse, such as being twisted, kinked, pinched, closed
(dripping or splashing) and no objects filled with in a door, or walked upon. Pay particular attention to
liquids, such as vases, shall be placed on the device. plugs, wall outlets, and the point where the cord exits
the appliance. The Power Plug is the disconnecting
WARNING: Do not install this equipment in a device. In case of an emergency, the Power Plug must
confined space such as a book case or similar unit. remain readily accessible
This device is equipped with a portable battery or 11. Only use attachments/accessories specified by
accumulator. the manufacturer.
Safety way to remove the battery from the 12. Use only with the cart, stand, tripod, bracket, or
equipment: Remove the old battery or battery pack, table specified by the manufacturer, or sold with
follow the steps in reverse order than the assembly. the device. When a cart is used, use caution when 1
To prevent contamination of the environment and moving the cart/device combination to avoid
Getting Started
bring on possible threat to human and animal health, injury from tip-over.
the old battery or the battery put it in the appropriate
container at designated collection points. Do not
dispose of batteries or battery together with other
waste. It is recommended that you use local, free
reimbursement systems batteries and accumulators.
The battery should not be exposed to excessive heat
such as sunshine, fire or the like. 13. Unplug this device during lightning storms or
when unused for long periods of time.
For models using an adapter
14. Refer all servicing to qualified service personnel.
Only use the AC adapter supplied with this device.
Servicing is required when the device has been
Do not use a power supply from another device or
damaged in any way, such as power-supply cord
another manufacturer. Using any other power cable
or plug is damaged, liquid has been spilled or
or power supply may cause damage to the device and
objects have fallen into the device, the device
void your warranty.
has been exposed to rain or moisture, does not
operate normally, or has been dropped.
equipment generates, uses, and can radiate radio with minimum distance 20 cm (7.8 inches) between
frequency energy and, if not installed and used in the antenna and your body. Users must follow the
accordance with the instructions, may cause harmful specific operating instructions for satisfying RF
interference to radio communications. However, there exposure compliance.
is no guarantee that interference will not occur in a FCC Radio Frequency Interference Requirements :
particular installation. If this equipment does cause
harmful interference to radio or television reception, High power radars are allocated as primary users of
which can be determined by turning the equipment the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands.
off and on, the user is encouraged to try to correct These radar stations can cause interference with
the interference by one or more of the following and/or damage this device. This device cannot be co-
measures: located with any other transmitter.
Responsible Party :
yy Reorient or relocate the receiving antenna.
yy Increase the separation between the equipment LG Electronics USA, Inc.
and the receiver. 1000 Sylvan Ave
yy Connect the equipment to an outlet on a circuit Englewood Cliffs, NJ 07632
different from that to which the receiver is Tel: 1-800-243-0000
connected.
yy Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference
and (2) this device must accept any interference
received, including interference that may cause
undesired operation of the device. Any changes or
modifications in construction of this device which are
not expressly approved by the party responsible for
compliance could void the users authority to operate
the equipment.
Table of Contents 5
Table of Contents
1
1 Getting Started 3 Operating
2 Safety Information 22 Basic operations
6 Unique features 22 USB operation
6 Introduction 22 Other operations
2
6 Symbols used in this manual 22 Turn off the sound temporarily
6 Accessories 22 Auto LED Off
7 Remote control 23 Using your TV remote control
8 Front panel 24 AUTO POWER On/Off
8 Rear panel 25 Auto function change
3
9 About LED condition 25 LG Sound Sync
10 Installing the sound bar 27 Using BLUETOOTH technology
11 Mounting the main unit on a wall 27 Listening to music stored on the Bluetooth
devices
29 Using BLUETOOTH App 4
2 Connecting 29 Install Music Flow Bluetooth App onto
13 Connecting the AC Adapter Your BLUETOOTH Device
13 Wireless subwoofer connection 29 Activate BLUETOOTH with Music Flow
15 Connecting to your TV Bluetooth App
15 Using an OPTICAL cable 30 Sound adjustment 5
15 Using an HDMI cable 30 Setting sound effect
16 Enjoy rich sound broadcast of the channel 31 Adjust the woofer level settings
with the sound bar 31 Night mode
17 ARC (Audio Return Channel) function
17 Additional information for HDMI
4 Troubleshooting
18 Optional equipment connection
18 HDMI connection 32 Troubleshooting
19 Optical In connection 33 NOTES to use wireless
19 Portable In connection
20 USB connection
20 Compatible USB devices
5 Appendix
20 USB device requirement 34 Trademarks and licenses
21 Playable file 35 Specifications
37 Maintenance
37 Handling the unit
6 Getting Started
consumption.
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc)
Remote control (1) Batteries (2)
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
Introduction
Symbols used in this manual
,,Note Wall brackets (2) Wall bracket install
Indicates special notes and operating features. guide (1)
>>Caution
Indicates cautions for preventing possible damages
from abuse.
Remote control a
1 (Power) : Switches the unit ON or OFF. / Switches
to the standby mode.
F : Selects the function and the input source.
1
ASC : Selects ASC (Adaptive Sound Control)
effect mode.
Getting Started
STANDARD : Selects STANDARD effect mode.
CINEMA : Selects CINEMA effect mode.
VOL o/p : Adjusts speaker volume.
(Mute) : Mutes the sound.
b
C/V (Skip/Search) :
- Skips Fast backward or Forward.
- Searches for a section within a file.
dM (Play/Pause) : Starts playback. / Pauses playback.
NIGHT ON/OFF :
- Turns on or off Night mode.
- Controls this unit using TV remote. (Refer to the
page 23.)
Replacement of Battery WOOFER LEVEL o/p : Adjusts sound level of
subwoofer.
AUTO POWER ON/OFF :
- Turns on or off AUTO POWER function. (Refer to
the page 24.)
- Turns on or off Auto LED Off function. (Refer to the
page 22.)
Front panel
1
Getting Started
Rear panel
Getting Started
OPTICAL LED turns on. OPTICAL function is selected.
,,Note
yy When you press any button, standby LED (Red) on the main unit blinks.
yy When you press (Mute) button, standby LED (Red) blinks slowly.
yy When this unit reaches minimum volume, standby LED (Red) blinks slowly.
yy When this unit reaches maximum volume, standby LED (Red) turns on for 2 seconds.
10 Getting Started
>>Caution
yy For best performance of wireless connection
such as Bluetooth or wireless subwoofer,
do not install the unit on Metallic furniture
because wireless connection communicates
through a module positioned on the bottom
of the unit.
yy Be careful not to make scratches on the
surface of the Unit /Sub-Woofer when
installing or moving them.
Getting Started 11
Mounting the main unit 1. Match the TVs BOTTOM EDGE of Wall bracket
install guide with the bottom of TV and attach to
on a wall the position.
1
You can mount the main unit on a wall.
Getting Started
2. When you mount it on a wall (concrete), use the
wall plugs. You should drill some holes. A guide
>>Caution sheet (Wall bracket install guide) is supplied to
Because it is difficult to make a connection after drill. Use the sheet to check the point to drill.
installing this unit, you should connect the cables
before installation.
Preparation materials
Unit
Wall brackets
3. Remove the Wall bracket install guide.
Screws
(Not supplied)
Screws (A)
Wall plug
12 Getting Started
4. Fix the brackets with screws (A) as shown in the 6. Fix the unit with the screws firmly.
illustration below.
1
Getting Started
,,Note
Screws (A) and Wall Plugs are not supplied for
mounting the unit. We recommend the Hilti ,,Note
(HUD-1 6 x 30) for the mounting. To detach the unit, perform it in reverse order.
Connecting
3. Plug the AC power cord into an AC outlet. Green The connection is completed.
Manually pairing wireless subwoofer 5. Turn on the main unit. : The sound bar and
wireless subwoofer will be automatically
When your connection is not completed, you can
connected.
check red LED or blinking green LED on the wireless
subwoofer and the wireless subwoofer does not -- Green LED on the rear of wireless subwoofer
make sound. To solve the problem, follow the steps turns on.
below. ,,Note
1. Adjust volume level of the main unit to minimum yy It takes a few seconds (and may take longer)
by pressing VOL p button repeatedly until for the main unit and the subwoofer to
standby LED (Red) on the main unit turns on. communicate with each other and make
2 2. Press and hold (Mute) on the remote control sounds.
for about 3 seconds. yy The closer the main unit and the subwoofer,
Connecting
-- The standby LED (Red) on the main unit blinks the better sound quality. It is recommended
quickly. to install the main unit and the subwoofer as
close as possible and avoid the cases below.
3. Press and hold Pairing on the back of the wireless
subwoofer for more than 5 seconds. -- There is a obstacle between the main unit
and the subwoofer.
-- There is a device using same frequency
with this wireless connection such as
a medical equipment, a microwave or a
wireless LAN device.
Connecting
HDMI
cable
Optical
cable
,,Note
yy HDMI CEC (Consumer Electronics Control):
2. Select the input source to OPTICAL by pressing F Using a single remote control, you have the
button repeatedly. ability to operate CEC compatible devices (TV,
Sound Bar, Blue-ray player, etc.)
,,Note yy You can also enjoy extra functions such as
yy Before connecting the optical cable, be sure USB / Bluetooth pressing F button on the
to remove the protection plug cover if your remote or unit. When you go back to live TV
cable has the cover. channel after using the extra functions (USB
yy You can enjoy the TV audio through the / Bluetooth) of this audio system, you should
speakers of this unit. In the case of some TV choose your preferred speaker on TV to enjoy
models, you must select the external speaker the sound from this audio system again.
option from the TV menu. (For details,
reference your TV user manual.)
yy Set up the sound output of TV to listen to
the sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [External speaker (Optical)]
yy Details of TV setting menu vary depending
on the manufacturers or models of your TV.
16 Connecting
,,Note
Enjoy rich sound broadcast of yy Depending on the state of the unit, some
SIMPLINK operation may differ from your
the channel with the sound bar purpose or not work.
yy Depending on a TV or a player which is
Connection through HDMI Cable connected with this unit, SIMPLINK operation
Your television must support the newest HDMI may differ from your purpose.
features (HDMI CEC1) / ARC (Audio Return Channel))
to fully enjoy the Live broadcasting channel with
audio system through an HDMI cable. Unless your
TV supports these HDMI features, the audio system
should be connected through an OPTICAL cable.
1) HDMI CEC (High-Definition Multimedia Interface
Consumer Electronics Control)
Consumer Electronics Control (CEC) is an HDMI
feature designed to allow the user to command and
control the CEC-enabled devices, that are connected
through HDMI by using only one of their remote
controls.
Trade names for CEC are SimpLink (LG) , Anynet+
(Samsung), BRAVIA Sync/ Link (Sony), EasyLink
(Philips), EZ-Sync/ VIERA Link (Panasonic), etc..
Connecting 17
Connecting
function, refer to your TV manual. 720 x 576p (or 480p), 1280 x 720p, 1920 x
-- You must use the HDMI cable (Type A, High Speed 1080i or 1920 x 1080p video input.
HDMI cable with Ethernet).
yy Not all HDCP-compatible HDMI or DVI devices will
-- You must connect the HDMI OUT on the unit with work with this player.
HDMI IN of the TV that supports ARC function
-The picture will not be displayed properly with
using an HDMI cable.
non-HDCP device.
-- You can connect only one Sound bar to TV
compatible with ARC. ,,Note
,,Note yy If a connected HDMI device does not accept
the audio output of the player, the HDMI
yy ARC function is automatically selected when devices audio sound may be distorted or may
ARC signal comes in from TV, no matter what
not output.
kind of the function you are using.
yy Changing the resolution when the connection
yy You can enjoy the TV audio through the has already been established may result in
speakers of this unit. In the case of some TV
malfunctions. To solve the problem, turn off
models, you must select the external speaker
the player and then turn it on again.
option from the TV menu. (For details,
reference your TV user manual.) yy When the HDMI connection with HDCP is not
verified, TV screen is changed to black screen.
yy Set up the sound output of TV to listen to In this case, check the HDMI connection, or
the sound through this unit :
disconnect the HDMI cable.
TV setting menu [ [Sound] [ [TV Sound
output] [ [External speaker (HDMI ARC)] yy If there are noises or lines on the screen,
please check the HDMI cable (length is
yy Details of TV setting menu vary depending on generally limited to 4.5 m (15 ft).
the manufacturers or models of your TV.
yy You cannot change the video resolution in the
yy If you change to other function while you HDMI IN mode. Change the video resolution
are using ARC function, you need to adjust
of the connected component.
ARC setting on TV setting again to use ARC
function. yy If the video output signal is abnormal when
your personal computer is connected to HDMI
IN jack, change the resolution of your personal
computer to 576p (or 480p), 720p, 1080i or
1080p.
18 Connecting
HDMI connection
You can enjoy the sound and picture from HDMI
connection on external device. HDMI
2 cable
For enjoying sound only
Connecting
You can enjoy the sound from the external device you
connect.
HDMI
cable
Portable
MP3 player, etc... cable 2
Optical
cable
Connecting
To the optical output jack of
external device
1. Connect the OPTICAL IN jack on the back of
the unit to optical out jack of your TV (or digital
device etc.)
2. Select the input source to OPTICAL by pressing F Listening to music from your portable
button repeatedly. player
3. Listen to sound. The unit can be used to play the music from many
types of portable players or external devices.
,,Note 1. Connect the portable player to the
Before connecting the optical cable, be sure to
PORTABLE IN connector of the unit by using 3.5
remove the protection plug cover if your cable
mm stereo cable.
has the cover.
2. Turn the power on by pressing 1 (Power).
3. Select the input source to PORTABLE by pressing
F button repeatedly.
4. Turn on the portable player or external device and
start playing it.
20 Connecting
Bitrate D
2
MP3 : within 80 to 320 kbps E
Connecting
WMA : within 56 to 128 kbps
OGG : within 64 to 500 kbps b F
FLAC : within 500 to 5000 kbps
WAV : within 500 to 5000 kbps G
c H
yy Maximum files : Under 2000 I
yy Maximum directories : Under 200
d J
yy A protected file by DRM (Digital rights
management) cannot be played on the unit. A
,,Note
yy The resume point may be cleared when you
pull out the power cord or removing the USB
device from the unit.
yy When you pause the USB playback, USB LED
on the main unit blinks.
Operating 23
Operating
is set to [External speaker].
yy Depending on the remote control, this
function may not work well.
yy This function does not operate on LG TV's
magic remote control.
yy This function may not work well when some
TV control functions such as CEC, SIMPLINK
and LG Sound Sync set to ON.
24 Operating
Operating
music on the Bluetooth device.
yy You can also use the remote control of this
When LG TV signal comes in unit while using LG Sound Sync. If you use TV's
When you turn on your LG TV connected by LG remote control again, the unit synchronizes
Sound Sync (Wireless connection), this unit changes with the TV.
the function to LG TV. You can hear the sound from yy When the connection fails, make sure of the
your TV. condition of the TV and power.
yy Make sure of the condition of this unit and
When connect a Portable device the connection in the cases below when using
LG Sound Sync.
When you connect your portable device using a
portable cable, this unit changes the function to -- Turn off the unit.
Portable. You can hear the music from your device. -- Changing the function to the others.
,,Note -- Disconnecting the optical cable.
yy To change to optical function, it needs 5 -- Disconnecting the wireless connection
seconds of no signal. caused by interference or a distance.
yy This unit does not change the function to yy The amount of time to turn off this unit is
optical if SIMPLINK of the connected TV, Blu- different depending on your TV when you set
ray disc player, set-top box or etc. device set AUTO POWER function to ON.
to on or connected CEC supported device is yy Details of TV setting menu vary depending on
turned on. the models of your TV.
yy If you want to use the auto function change,
SIMPLINK must be turned off. It takes for
about 30 seconds to turn off SIMPLINK.
26 Operating
Operating
with the Bluetooth device, a list of the devices
yy Available Devices : Mobile phone, MP3, Laptop, found may appear in the Bluetooth device display
PDA etc. depending on the type of Bluetooth device. Your
yy Version : 4.0 unit appears as LG SH4 (XX) / LG SHC4 (XX).
yy Codec : SBC ,,Note
yy XX means the last two digits of
BLUETOOTH Profiles Bluetooth address. For example, if your
unit has a Bluetooth address such as
In order to use Bluetooth wireless technology, 9C:02:98:4A:F7:08, you will see
devices must be able to interpret certain profiles. This LG SH4 (08) / LG SHC4 (08) on your
unit is compatible with following profile. Bluetooth device.
A2DP (Advanced Audio Distribution Profile)
yy Depending on the Bluetooth device type,
some device have a different pairing way.
Enter the PIN code (0000) as needed.
28 Operating
Operating
yy Make sure that your Bluetooth device is
App onto Your BLUETOOTH equipped with Google Android Market
(Google Play Store).
Device
There are two ways to install Music Flow Bluetooth
App onto Your Bluetooth Device. Activate BLUETOOTH with
Install Music Flow Bluetooth App Music Flow Bluetooth App
through QR code Music Flow Bluetooth app helps to connect your
Bluetooth device to this unit.
1. Install Music Flow Bluetooth app through QR
1. Tap Music Flow Bluetooth app icon on the home
code. Use the scanning software to scan the QR
screen to open Music Flow Bluetooth app, and
code.
go to the main menu.
2. Tap [Menu] and select the unit you want.
3. If you want to get more information to operate,
tap [Setting] and tap [Help] menu.
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device
has a scanning software application. If you
dont have one, download one from Google
Android Market (Google Play Store).
yy Depending on the area, QR code may not
work.
30 Operating
device while using Music Flow Bluetooth STANDARD You can enjoy optimized sound.
app, Music Flow Bluetooth app may operate
abnormally. You can enjoy more immersive
CINEMA
and cinematic surround sound.
yy When Music Flow Bluetooth app operates
abnormally, check your Bluetooth device and
the connection of Music Flow Bluetooth app ,,Note
and then try to connect again. yy In some of sound effect mode, some speakers,
theres no sound or low sound. It depends on
yy Depending on the smart phone's operating the mode of sound and the source of audio, it
system, you have some differences for Music is not defective.
Flow Bluetooth operation.
yy You may need to reset the sound effect
yy Even though Bluetooth connection will mode, after switching the input, sometimes
be disconnected, you can use Music Flow even after the sound file changed.
Bluetooth app when you change the
function.
yy Even though Bluetooth connection will
be disconnected, you can use Music Flow
Bluetooth app when you change the
function.
yy You can use the additional functions of this
unit using "Music Flow Bluetooth" app.
yy Additional features offered by "Music Flow
Bluetooth" app may not work depending on
the distance between this unit and Bluetooth
device and wireless conditions.
Operating 31
,,Note
When the subwoofer level reaches maximum
or minimum , standby LED (Red) on the main
unit turns on for 2 seconds.
Night mode
This function is useful when you want to watch
movies at low volume late at night. 3
Press NIGHT ON/OFF button to turn on or off night
Operating
mode.
32 Troubleshooting
Troubleshooting
yy Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn it on again.
The unit does not yy Disconnect the power cord of this unit and the connected external device (TV,
work properly. Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
yy Previous setting may not be saved when device power is shut off.
Check the details below and adjust the unit according to them.
yy With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting on
TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
When you feel the yy With the sound bar connected with Player, change the AUDIO DIGITAL OUT
output sound of the setting on Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or
unit is low. [BITSTREAM].
yy Change Audio DRC setting on Player setup menu to [OFF] state.
yy Make sure Night Mode is not On. Turn [OFF] Night Mode.
Troubleshooting
yy When any part of your body makes contact with the transceiver of the Bluetooth
device or sound bar.
yy When there is an obstacle or wall or the device is installed in a secluded spot.
Bluetooth device yy When there is a device (a wireless LAN, a medical equipment or a microwave)
may malfunction or using same frequency, make the distance between the products as far away as
make noise in the possible each other.
following cases. yy When connecting the device to a Bluetooth device, make the distance between
the products as close as possible.
yy When the device gets too far from the Bluetooth device, the connection is
disconnected and also malfunction may occur.
34 Appendix
Specifications
General
22 W
Power consumption Networked standby : 0.5 W
(If all network ports are activated.)
yy Model : DA-38A25
AC adapter yy Manufacturer : Asian Power Devices Inc.
yy Input : 100 - 240 V ~ 50 - 60 Hz 1.2 A
yy Output : 25 V 0 1.52 A
Approx.
Dimensions (W x H x D) 890 mm X 53 mm X 85 mm (35.0 inch x 2.1 inch x 3.3 inch) ,
Without foot
Net Weight Approx. 2.34 kg (5.2 lb)
Operating temperature 5 C to 35 C (41 F to 95 F)
Operating humidity 5 % to 90 %
Bus Power Supply 5 V 0 500 mA
Available Digital Input Audio
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Sampling Frequency
Available Digital Input Audio format Dolby Digital, DTS Digital Surround, PCM
Input/Output 5
OPTICAL IN (Digital audio in) 3 V (p-p), Optical jack x 1
Appendix
PORTABLE IN (Portable in) 0.5 Vrms (3.5 mm stereo jack) x 1
HDMI IN 19 Pin (Type A, HDMI connector) x 1
HDMI OUT 19 Pin (Type A, HDMI connector) x 1
Wireless subwoofer
Power requirements 120 V ~ 60 Hz
Power consumption 33 W
Type 1 Way 1 Speaker
Impedance 3
Rated Input Power 180 W
Max. Input Power 360 W
Approx.
Dimensions (W x H x D)
171 mm x 320 mm x 252mm (6.7 inch x 12.6 inch x 9.9 inch)
Net Weight Approx. 4.2 kg (9.3 lb)
5
Appendix
Appendix 37
Maintenance
Appendix
LG Customer Information Center