Sei sulla pagina 1di 2

VP44 Fuel Pump Can Not Reach Commanded Timing Page 1 of 2

:
FAULT CODE 368
VP44 Fuel Pump Can Not Reach Commanded Timing
Overview

CODE REASON EFFECT


Fault Code: 368 The VP44 fuel pump can not achieve the timing value Engine power
PID: P0216, being commanded by the engine electronic control derate. White
S254 module (ECM) due to an internal pump problem. smoke.
SPN: 1078
FMI: 8
LAMP: Yellow
SRT:

VP44 Fuel Pump Circuit

Circuit Description

The VP44 fuel pump uses an internal check to determine if the fuel injection pump can reach
the commanded timing.

Component Location

The VP44 fuel pump circuit is internal to the VP44 fuel pump.

Shop Talk

The VP44 fuel pump uses pressure generated by an internal vane-type transfer pump and its
timing solenoid to vary the fuel pump's timing according to the specified electronic control
module (ECM) commands. Possible causes can be classified into four groups:

Static timing - offset key, gear train issues


Low-pressure fuel supply issues - restriction issues, low supply pressure
Fuel pump return plumbing issues - high return restriction, overflow valve issues
Noise in the engine position pulse signal.

mk:@MSITStore:C:\Intelect\INSITE\FIS\FIS3666194.chm::/html/80-fc368.htm 10/5/2010
VP44 Fuel Pump Can Not Reach Commanded Timing Page 2 of 2

Refer to Troubleshooting Fault Code t05-368

Last Modified: 29-Jul-2010

Copyright 2000-2009 Cummins Inc. All rights reserved.

mk:@MSITStore:C:\Intelect\INSITE\FIS\FIS3666194.chm::/html/80-fc368.htm 10/5/2010

Potrebbero piacerti anche