Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited or used, except in the
limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
Schedule of Rates
for
General Civil Works
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
1 GC GENERAL CIVIL
2 C007.00.00 ROADS & FLEXIBLE PAVEMENT (UPTO WBM LAYER)
(SPEC. NO.6-65-0018)
3 C007.20.00M01 Earthwork in filling for all heights and depths for any lead CUM 196.75
within the complex boundary limit for road subgrade or
any other place as directed to proper levels, slopes,
grades and camber with available excavated soil
deposited earlier anywhere within the complex boundary
limit including consolidating the exposed natural soil to
95% of max. laboratory dry density as per IS:2720 Part-
VIII, re-excavating the deposited soil excavated earlier,
including clearing and stripping as per
specifications, cutting of trees of girth 30cms and below
(girth measured at a height of 1.0M above ground level)
including uprooting of vegetation, roots and disposing of
the shrubs, bushes, roots etc., breaking clods, spreading
in layers not exceeding 20 cm loose thickness, watering,
ramming and compacting with road roller to give at least
97% of max. laboratory dry density as per IS:2720 Part-
VIII including providing testing apparatus and testing the
degree of consolidation, dressing and leveling, etc.
complete (the lead for the above mentioned operations
shall be within the boundary limit of plant) as per
drawings, specifications and directions of Engineer-in-
Charge.
4 C007.26.00 Supplying and laying of stone aggregate of 90mm down SQM 400
to 45mm size for SUB-BASE COURSE tough, sound,
clean and durable including cost of stone aggregate, all
royalties, taxes, handling, transportation to site, unloading
the same by the side of road with all leads and lifts,
spreading and laying to form water bound macadam in
one layer of 100mm compacted thickness to proper
grade, camber and level, filling voids with screenings and
binding the surface with binding material of plasticity
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
index upto 6% including cost of supply of screening and
binding material, consolidating with power driven road
roller, watering, with all leads and lifts including
preparation of camber below first layer etc. complete as
per drawings, specifications and directions of Engineer-in-
Charge.
5 C007.29.00 Supplying and laying of stone aggregate of 63mm down SQM 17906
to 45mm size for WBM layer Base Course, tough, sound,
clean and durable including cost of stone aggregate, all
royalties, taxes, handling, transportation to site, unloading
the same by the side of road with all leads and lifts,
spreading and laying to form water bound macadam in
one layer of 75mm compacted thickness to proper grade,
camber and level, filling voids with screenings and
binding material of plasticity index upto 6%, including cost
of supply of screening and binding material, consolidating
with power driven road roller, watering, with all leads and
lifts etc. complete as per drawings, specifications and
directions of Engineer-in-Charge.
6 C008.00.00 CONCRETE PAVEMENTS (SPEC NO.6-65-0019)
7 C008.02.00 Providing and laying Reinforced Cement Concrete with
20mm and down size graded crushed stone aggregates
in flooring, pavements etc. including leaving pockets, if
necessary, making recess/drains, laying in alternate
panels, etc. for all depths including shuttering, tamping,
curing, etc. as specified in any shape, thickness, position
and finishing the top surface smooth etc. all complete as
per drawings, specifications and directions of Engineer-in-
Charge.
8 C008.02.01 For RCC of M-30 grade concrete CUM 1564
(all materials including cement but excluding cost of
providing & fixing reinforcement and joint sealing shall be
supplied by the contractor).
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
9 C008.02.03 For RCC of M-25 grade concrete (all materials including CUM 812
cement but excluding cost of providing & fixing
reinforcement and joint sealing shall be supplied by the
contractor).
10 C008.05.00 Providing 20mm wide Expansion Joints in pavement
slabs as per std. No.7-65-0404 including cleaning the
joints of all loose material, filling with 20mm thick
impregnated fibre boards for the full depth of slab except
for 25mm depth from top and sealing the top 25mm wth
approved Joint Sealing Compound as per IS:1834 Type-B
etc. all complete as per drawings, specifications and
directions of Engineer-in-Charge.
11 C008.05.01 For type-I pavement (Upto and inclusive of thickness of M 1118
200 mm). (Including providing and laying MS dowel bar,
painting as required, GI pipe and cap and cotton waste).
12 C008.05.03 For type-II pavement (Upto and inclusive of thickness of M 387
150 mm).
13 C008.05.06 For thickened pavement (Upto and inclusive of thickness M 88
of 300 mm).
14 C008.12.00 Providing joints in pavements and around foundations as
per std no.7-65-404 including cleaning the joints of all
loose materials and sealing with sealing compound
conforming to IS:1834 Type B as required etc. complete
as per drawings, specifications and directions of Engineer
-in-Charge for;
15 C008.12.01 Construction joints 20mm wide x 25mm deep. M 5641
16 C008.12.02 Sealing joint around pedestal and column etc. 20mm M 3743
wide x 200 mm deep including filling with 20mm thick
impregnated fire board for the full depth of slab except for
25mm depth from top and sealing the top 25mm with
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
approved joint sealing compound as per IS:1834 Type-B.
17 C008.12.03 Sealing joint around pedestal and column etc. 20mm M 3743
wide x 150 mm deep including filling with 20mm thick
impregnated fire board for the full depth of slab except for
25mm depth from top and sealing the top 25mm with
approved joint sealing compound as per IS:1834 Type-B.
18 C008.12.05 Sealing joint around pedestal and column etc. 20mm M 1872
wide x 300 mm deep including filling with 20mm thick
impregnated fire board for the full depth of slab except for
25mm depth from top and sealing the top 25mm with
approved joint sealing compound as per IS:1834 Type-B.
19 C009.00.00 FLEXIBLE PAVEMENTS WITH BITUMEN PREMIX
CARPET (SPEC. NO. 6-65-0020)
20 C009.03.00M01 Providing and laying 50mm thick bitumen premix carpet SQ.M. 605
including heating bitumen, mixing stone chips, grit, laying
to proper grade and camber including preparation of
surface, filling pot holes with premix chips, rolling premix
carpet with 8 to 10 ton road roller, providing and rolling
seal coat for high rainfall areas (over 150 cm/year) to
proper grade and camber, spreading sand over finished
surfaces including brushing and clearing WBM surfaces,
spraying tack coat of bitumen, etc. complete including
providing and running road roller etc. all as per drawings,
specifications and directions of Engineer-in-Charge.
(Bitumen of grade VG10 / VG 30 shall be supplied free of
cost by the Owner)
21 C010.00.00 RCC PIPE CULVERTS & ELECTRICAL ROAD
CROSSINGS ETC. SPEC. NO.6-65-0021)
22 C010.05.00 Supplying and laying in position PVC pipes conforming to
IS:4985 Class - I for cable crossings, including cutting the
pipe if necessary, lowering, laying in position to proper
levels, slopes ,providing proper jointing as per code
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
requirements or manufacturers recommendations,
sealing the open ends of pipes with gunny bags etc. all
complete as per drawings, specifications and directions of
Engineer-in-Charge. For following NOMINAL OUTSIDE
PIPE DIA (MM)
23 C010.05.01V01 M 415.8
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
drawings and directions of Engineer-in-Charge.
For following nom size in mm and piping material class
27 C012.04.01V01 M 20
28 C012.04.01V02 M 20
29 C012.04.01V04 M 20
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
35 C025.44.00M01 Supplying, fabricating and fixing in position in RCC or EACH 750
brick masonry walls MS rungs made out of 20mm dia.
reinforcement bar of grade Fe500D TMT bar conforming
to IS: 1786 .Including laying or welding to keep in proper
position etc. complete as per drawings, specifications
and instructions of Engineer-in-Charge.
36 C025.45.00 Supplying, fabrication and fixing in position black steel
tube vent pipes (Medium class as per IS:1239) 100mm
dia. with specials and necessary fittings including cutting
to required length, edge preparation, jointing by welding,
making and fixing single joint mitre bends wherever
required, earth work in excavation and back filling, fixing
in concrete blocks, providing painting with 2 coats of
chlorinated rubber zinc phosphate primer @ 40 DFT per
coat and finished paint of 2 coats of chlorinated rubber
paint @ 40 DFT per coat on above grade portion and
supplying and fixing clamps, corrosion protection tape
coating as per spec. no. 6-79-0011 for underground
portion complete in all respects including all labour and
materials, etc. as per drawings specifications and
direction of Engineer-in-Charge.
37 C025.45.01 BELOW grade level / Pavement level M 93.5
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
40 C034.00.00 PLUMBING AND BUILDING DRAINAGE (Spec. No. 6-
65-0053)
41 C034.19.00 Constructing of brick masonry valve chamber in 1:4
Cement mortar(1 cement: 4 sand) with CI frame & cover
fixed on M-20 grade cement concrete , necessary
excavation, M-20 grade foundation concrete, 13mm thick
1:3 cement plaster on inside & all exposed surfaces,
backfilling, removal of surplus earth for all leads within the
complex limit etc. complete as per standards, drawings,
specifications and directions of Engineer-in-Charge. For
following Valve size and Brick Class (All materials
including Cement supplied by contractor )
42 C034.19.01V09 Each 1
43 C034.19.01V10 Each 1
44 C034.19.01V13 Each 1
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
Performing of magnetic particle test or dye penetration
test including supply of all necessary materials,
equipment and labour for carrying out the work as per
specs. and direction of Engineer-in -charge
48 C052.01.00 DP TEST LENGTH(BW&SW) INCHES 30
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
of Engineer-in-Charge including connecting the pipes to
manhole, including return of all unused / scrap pipe to
owner's storage point (Pipes and fittings shall be supplied
by owner as free issue material.)
51 C169.01.00 For Water System (Pressure Piping)
For CS Piping (Non IBR), Thickness <=10 mm
Fabrication, For following Nominal Sizes
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
63 C169.06.02 Dia 2" - 6" INCH M 1700
71 C999.00.00 Miscellaneous
72 C999.99.00 Miscellaneous
73 C999.99.99V01 Providing 1:2 (1cement: 2 sand) cement mortar levelling CUM 2.3
course
on Brick Masonary/ RCC surface or at any other place as
directed including packing, consolidating, curing,
finishing, etc. complete as per drawings, specifications
and directions of Engineer-in-Charge.
(All materials including cement supplied by the
Contractor.)
74 C999.99.99V02 Supplying and laying of soling with best quality blue SQM 453.75
granite stone of size not less than 200 mm thickness for
SUB-BASE COURSE tough,sound, clean and durable
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
including cost of soling , all royalties, taxes, handling,
transportation to site, unloading the same by the side of
road with all leads and lifts, spreading and laying in
200mm compacted thickness to proper grade, camber
and level, filling voids with screenings and binding the
surface with available binding material of plasticity index
upto 6%, including consolidating with power driven road
roller, watering, with all leads and lifts including
preparation of camber below soling etc. complete as per
drawings, specifications and directions of Engineer-in-
Charge.
75 C999.99.99V03 Supplying and laying of Random Rubble Masonary in CUM 50
Cement Mortar 1:4 (1 cement: 4coarse sand) in any
shape and thickness for dyke wall, fire wall, compound
wall, toe walls, drains, or at any other places as directed
including providing recessess, openings,
scaffolding,staging, raking out joints, curing etc. by using
stone rubble 150mm to 300mm size, transportation to
work site including handling, all leads and lifts within
complex limit, using at required locations, dressing of
stones etc. all complete as per drawings, specifications
and directions of Engineer-in-Charge at all depths below
and upto and inclusive of plinth level.(All materials
including cement supplied by contractor)
76 C999.99.99V04 Supply and laying of gravel/ crush stone of size ranging CUM 3.52
between 27mm to 37mm in valve pit, drains, open area
within the unit battery limit or at any other place as
directed, etc. complete as per drawings, specifications
and direction of Engineer-in-Charge.
77 C999.99.99V05 Supply, fabrication and erection for Drinking Water pipe EACH 1
hookup from existing pipe( of any diameter ) for proposed
pipe (CS / G.I pipe) including supply & installation of
tees,elbows,flanges etc,( if required for hookup ),cutting
of existing pipe, welding ( if required), hydrotesting etc
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
with all materials,tools and tackles etc complete as per
instructions of Engineer-in-Charge. For Proposed Pipe
Nominal Dia- 40 mm
78 C999.99.99V06 Supply, fabrication and erection for Drinking Water pipe EACH 1
hookup from existing pipe( of any diameter ) for proposed
pipe (CS / G.I pipe) including supply & installation of
tees,elbows,flanges etc,( if required for hookup ),cutting
of existing pipe, welding ( if required), hydrotesting etc
with all materials,tools and tackles etc complete as per
instructions of Engineer-in-Charge.For Proposed Pipe
Nominal Dia- 50 mm
79 C999.99.99V07 Supply and installation of gate valves assembly consisting EACH 1
of valve, 2 no. flages, 2 no. gaskets and 2 sets of bolt per
valve assembly in
position, including supply and fixing of nuts, bolts,
gaskets, washers etc. complete as per drawings,
specifications and directions of Engineer-in-Charge
assembly for following nominal size and Piping Class Dia
- 50 mm , Piping Class - J2A
80 C999.99.99V08 Supply and installation of gate valves assembly consisting EACH 1
of valve, 2 no. flages, 2 no. gaskets and 2 sets of bolt per
valve assembly in
position, including supply and fixing of nuts, bolts,
gaskets, washers etc. complete as per drawings,
specifications and directions of Engineer-in-Charge
assembly for following nominal size and Piping Class Dia
- 40 mm, Piping Class - J2A
81 C999.99.99V09 Supply and installation of gate valves assembly consisting EACH 1
of valve, 2 no. flages, 2 no. gaskets and 2 sets of bolt per
valve assembly in position, including supply and fixing of
nuts, bolts, gaskets, washers etc. complete as per
drawings, specifications and directions of Engineer-in-
Charge assembly for following nominal size and Piping
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
Class Dia - 25 mm, Piping Class - J2A
82 C999.99.99V10 Supply, fabrication and erection for Drinking Water pipe EACH 1
hookup from existing pipe( of any diameter ) for proposed
pipe (CS / G.I pipe) including supply & installation of
tees,elbows,flanges etc,( if required for hookup ),cutting
of existing pipe, welding ( if required), hydrotesting etc
with all materials,tools and tackles etc complete as per
instructions of Engineer-in-Charge. For Proposed Pipe
Nominal Dia- 25 mm
83 C999.99.99V11 Laying of Random Rubble Masonry in Cement Mortar 1:4 CUM 50
(1 Cement: 4 Coarse sand) in any shape & thickness for
dyke wall, fire wall, compound wall, toe walls, drains, or at
any other places as directed including providing
recessess, openings, scaffolding,staging ,raking out
joints, curing etc. by breaking stones/boulders of various
sizes available within complex limit to required size bond,
through stones , corner stones, quoin etc. trasportation to
work site with all leads & and lifts within complex
limit,handling etc. and using at required locations all
complete as per drawings, specification and direction of
Engineer- in - Charge At all depths below and upto and
inclusive of plinth level. (All material including cement
supplied by contractor except RR stone issued by BPCL
KR)
Schedule of Rates
for
Structural Works
Tender No. A307-IUS-16-48-CF-T-8107 Part 0 1 REVISED & REISSUED FOR TENDER AM KMK SP
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
1 S000.00.00 CIVIL & STRUCTURAL
2 S001.00.00 EARTH WORK (REFER SPECIFICATION NO. 6-68-
0003)
3 S001.01.00 Earthwork excavation in soil
4 S001.01.01M02 Earth work in EXCAVATION below ground level for all Cu.m. 30000
kinds of works in ALL TYPES OF SOILS EXCEPT HARD
ROCK as classified in specification for a depth upto 1.5m
including removal of vegetation, shrubs and debris,
cutting and dressing of sides in slopes, levelling, grading
and ramming of bottoms, dewatering of accumulated
water from any source and keeping the surface dry for
subsequent works and disposal or stacking of excavated
material within a lead of 100m, as directed including
providing temporary supports to existing service lines like
water pipes, sewage pipes, electric overhead and
underground cables etc. all complete, but excluding
shoring and strutting.
5 S001.01.02M01 Earth work in EXCAVATION below ground level for all Cu.m. 6600
kinds of works in ALL TYPES OF SOILS EXCEPT HARD
ROCK as classified in specification for a depth beyond
1.5m and upto and inclusive of 3.0m including removal of
vegetation, shrubs and debris, cutting and dressing of
sides in slopes, levelling, grading and ramming of
bottoms, dewatering of accumulated water from any
source and keeping the surface dry for subsequent works
and disposal or stacking of excavated material within a
lead of 100m, as directed including providing temporary
supports to existing service lines like water pipes, sewage
pipes, electric overhead and underground cables etc. all
complete, but excluding shoring and strutting.
6 S001.01.03M01 Earth work in EXCAVATION below ground level for all Cu.m. 1000
kinds of works in ALL TYPES OF SOILS EXCEPT HARD
ROCK as classified in specification for a depth beyond
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
3.0m and upto & inclusive of 4.5m including removal of
vegetation, shrubs and debris, cutting and dressing of
sides in slopes, levelling, grading and ramming of
bottoms, dewatering of accumulated water from any
source and keeping the surface dry for subsequent works
and disposal or stacking of excavated material within a
lead of 100m, as directed including providing temporary
supports to existing service lines like water pipes, sewage
pipes, electric overhead and underground cables etc. all
complete, but excluding shoring and strutting.
7 S001.01.04M01 Earth work in EXCAVATION below ground level for all Cu.m. 450
kinds of works in ALL TYPES OF SOILS EXCEPT HARD
ROCK as classified in specification for a depth beyond
4.5m and upto & inclusive of 6.0m including removal of
vegetation, shrubs and debris, cutting and dressing of
sides in slopes, levelling, grading and ramming of
bottoms, dewatering of accumulated water from any
source and keeping the surface dry for subsequent works
and disposal or stacking of excavated material within a
lead of 100m, as directed including providing temporary
supports to existing service lines like water pipes, sewage
pipes, electric overhead and underground cables etc. all
complete, but excluding shoring and strutting.
8 S001.01.05M01 Earth work in EXCAVATION below ground level for all Cu.m. 10
kinds of works in ALL TYPES OF SOILS EXCEPT HARD
ROCK as classified in specification for a depth beyond
6.0m and upto & inclusive of 7.5m including removal of
vegetation, shrubs and debris, cutting and dressing of
sides in slopes, levelling, grading and ramming of
bottoms, dewatering of accumulated water from any
source and keeping the surface dry for subsequent works
and disposal or stacking of excavated material within a
lead of 100m, as directed including providing temporary
supports to existing service lines like water pipes, sewage
pipes, electric overhead and underground cables etc. all
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
complete, but excluding shoring and strutting.
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
12 S001.05.03 Earth work in EXCAVATION below ground level for all Cu.m. 5
kinds of works in HARD ROCKS for a depth beyond 3.0m
and upto & inclusive of 4.5m by CHISELLING (pneumatic
or manual), wedging or any other agreed methods (where
blasting is prohibited for any reason or as decided)
including all related works, all equipments required for
chiselling, and cutting upto required levels, dressing and
trimming of sides, levelling and grading of bottoms,
dewatering of accumulated water from any source and
keeping the surface dry for subsequent works and
disposal of spoils to spoil heaps and stacking of usable
excavated materials within a lead of 100m etc. all
complete as directed including providing temporary
supports to existing service lines like waterpipes, sewage
pipes, electric overhead and underground cables etc. all
complete.
13 S001.05.04 Earth work in EXCAVATION below ground level for all Cu.m. 5
kinds of works in HARD ROCKS for a depth beyond 4.5m
and upto & inclusive of 6.0m by CHISELLING (pneumatic
or manual), wedging or any other agreed methods (where
blasting is prohibited for any reason or as decided)
including all related works, all equipments required for
chiselling, and cutting upto required levels, dressing and
trimming of sides, levelling and grading of bottoms,
dewatering of accumulated water from any source and
keeping the surface dry for subsequent works and
disposal of spoils to spoil heaps and stacking of usable
excavated materials within a lead of 100m etc. all
complete as directed including providing temporary
supports to existing service lines like waterpipes, sewage
pipes, electric overhead and underground cables etc. all
complete.
14 S001.05.05 Earth work in EXCAVATION below ground level for all Cu.m. 5
kinds of works in HARD ROCKS for a depth beyond 6.0m
and upto & inclusive of 7.5m by CHISELLING (pneumatic
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
or manual), wedging or any other agreed methods (where
blasting is prohibited for any reason or as decided)
including all related works, all equipments required for
chiselling, and cutting upto required levels, dressing and
trimming of sides, levelling and grading of bottoms,
dewatering of accumulated water from any source and
keeping the surface dry for subsequent works and
disposal of spoils to spoil heaps and stacking of usable
excavated materials within a lead of 100m etc. all
complete as directed including providing temporary
supports to existing service lines like waterpipes, sewage
pipes, electric overhead and underground cables etc. all
complete.
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
compactors to achieve 90% laboratory maximum dry
density, dressing, trimming etc. in foundations, plinths,
trenches, pits etc. all complete.
20 S001.07.02 BACKFILLING after execution of the WORK to proper Cu.m. 5300
grade and level with selected materials from available
excavated soil from spoil heaps beyond a LEAD OF
100M AND UPTO & INCLUSIVE OF 500M including re-
excavating the deposited soil excavated earlier, breaking
clods, laying at all depths and heights in layers of
thickness not exceeding 15 Cms. watering, rolling and
ramming by manual methods/mechanical compactors to
achieve 90% laboratory maximum dry density, dressing,
trimming etc. in foundations, plinths, trenches, pits etc. all
complete.
21 S001.07.03 BACKFILLING after execution of the WORK to proper Cu.m. 3450
grade and level with selected materials from available
excavated soil from spoil heaps beyond a LEAD OF
500M AND UPTO & INCLUSIVE OF 1KM including re-
excavating the deposited soil excavated earlier, breaking
clods, laying at all depths and heights in layers of
thickness not exceeding 15 Cms. watering, rolling and
ramming by manual methods/mechanical compactors to
achieve 90% laboratory maximum dry density, dressing,
trimming etc. in foundations, plinths, trenches, pits etc. all
complete.
22 S001.10.00 Transporting & Disposing the SURPLUS EARTH AND
DEBRIS
23 S001.10.01 Transporting and disposing the SURPLUS EARTH AND Cu.m. 3000
DEBRIS including shrubs and vegetations from
construction area beyond the initial LEAD OF 100M AND
UPTO 1KM including re-excavating the deposited soil
excavated earlier, transportation, loading, unloading,
laying at all depths and heights, stacking, levelling and
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
dressing both the area (viz. from where the earth is
transported and where it is deposited) to required levels
and slopes complete with all lifts as directed. For carting
on the basis of truck measurements (volume of truck
reduced by 30% for voids).
24 S001.10.02 Transporting and disposing the SURPLUS EARTH AND Cu.m. 2250
DEBRIS including shrubs and vegetations from
construction area beyond the initial LEAD OF 1.0KM AND
UPTO & INCLUSIVE OF 3.0KM including re-excavating
the deposited soil excavated earlier, transportation,
loading, unloading, laying at all depths and heights,
stacking, levelling and dressing both the area (viz. from
where the earth is transported and where it is deposited)
to required levels and slopes complete with all lifts as
directed. For carting on the basis of truck measurements
(volume of truck reduced by 30% for voids).
25 S001.10.03 Transporting and disposing the SURPLUS EARTH AND Cu.m. 2250
DEBRIS including shrubs and vegetations from
construction area beyond the initial LEAD OF 3.0KM AND
UPTO & INCLUSIVE OF 5.0KM including re-excavating
the deposited soil excavated earlier, transportation,
loading, unloading, laying at all depths and heights,
stacking, levelling and dressing both the area (viz. from
where the earth is transported and where it is deposited)
to required levels and slopes complete with all lifts as
directed. For carting on the basis of truck measurements
(volume of truck reduced by 30% for voids).
26 S001.10.04 Transporting and disposing the SURPLUS EARTH AND CUM 7500
DEBRIS including shrubs and vegetations from
construction area beyond the initial LEAD OF 5.0 KM
AND UPTO ANYWHERE within the plant boundary
including re-excavating the deposited soil excavated
earlier, loading, transportation, unloading, laying at all
depths and heights, stacking, levelling and dressing both
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
the area (viz. from where the earth is transported and
where it is deposited) to required levels and slopes
complete with all lifts as directed. For carting on the basis
of truck measurements (volume of truck reduced by 30%
for voids).
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
LEAD OF 5.0KM AND UPTO the area of disposal
ANYWHERE WITHIN THE PLANT BOUNDARY
including loading, unloading, laying at all depths and
heigths, stacking, spreading, levelling at an area of
disposal as directed. For carting on the basis of Truck
Measurements (vloume of truck reduced by 50% for
voids).
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
aggaregates/Gravels.ALL MATERIALS INCLUDING
CEMENT SUPPLIED BY THE CONTRACTOR.
36 S002.17.03 Providing and laying PLAIN CEMENT CONCRETE for all Cu.m. 10
depths below and upto plinth level in foundations,drains,
fillings, non-suspended floors, pavements & ramps or any
other works etc. including shuttering, tamping, ramming,
vibrating, curing, etc. all as specified in any shape,
position, thickness and finishing the top surface rough or
smooth as specified and directed all complete for
concrete of nominal mix 1:3:6 by mass (1 Cement: 3
Coarse Sand: 6 Crushed Stone Aggregates/Gravels) with
40mm and down size graded crushed stone
aggaregates/Gravels.ALL MATERIALS INCLUDING
CEMENT SUPPLIED BY THE CONTRACTOR.
37 S002.17.05 Providing and laying PLAIN CEMENT CONCRETE of Cu.m. 5
nominal mix 1:3:6 by mass (1 Cement : 3 Sand : 6
Crushed Stone Aggregates) with 10mm and down size
graded crushed stone aggregates below and upto plinth
level as SCREED in trenches, floor slabs, sumps,
channels, drains etc. for all depths including shuttering,
tamping, curing etc. as specified in any shape, level,
thickness, position and finishing the top surface smooth
etc. all complete as directed. ALL MATERIALS
INCLUDING CEMENT SUPPLIED BY THE
CONTRACTOR.
38 S002.17.07 Providing and laying PLAIN CEMENT CONCRETE for all Cu.m. 40
depths below and upto plinth level in foundations,drains,
fillings, non-suspended floors, pavements & ramps or any
other works etc. including shuttering, tamping, ramming,
vibrating, curing, etc. all as specified in any shape,
position, thickness and finishing the top surface rough or
smooth as specified and directed all complete for
concrete grade M15 with 20mm and down size graded
crushed stone aggaregates/Gravels.ALL MATERIALS
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
INCLUDING CEMENT SUPPLIED BY THE
CONTRACTOR.
39 S002.17.08 Providing and laying PLAIN CEMENT CONCRETE for all Cu.m. 50
depths below and upto plinth level in foundations,drains,
fillings, non-suspended floors, pavements & ramps or any
other works etc. including shuttering, tamping, ramming,
vibrating, curing, etc. all as specified in any shape,
position, thickness and finishing the top surface rough or
smooth as specified and directed all complete for
concrete grade M20 with 20mm and down size graded
crushed stone aggaregates/Gravels.ALL MATERIALS
INCLUDING CEMENT SUPPLIED BY THE
CONTRACTOR.
40 S002.18.00 RCC Substrutures - Non FIM Items
41 S002.18.17 Providing and laying REINFORCED CEMENT CUM 13470
CONCRETE OF M-30 GRADE with 20 mm and down
size graded crushed stone aggregates/ gravel in SUB-
STRUCTURE e.g. foundations, raft, beams, slabs, pile
caps, retaining walls, dyke walls, jambs, counterforts,
buttresses, pedestals, pipe sleepers, columns,
suspended floors, staircases, landings, steps, brackets
etc., including equipment/ machine foundations &
pedestals viz. compressors, ID & FD fans, pumps,
generators, crushers, mills, etc., (including single pour
concreting as specified on the drawing), applying cement
wash on concrete surface (wherever no other surface
application is specified), providing pockets, openings,
recesses, chamfering, etc., wherever required, vibrating,
tamping, curing and rendering if required to give a
smooth and even surface etc. (EXCLUDING THE COST
OF REINFORCEMENT, SHUTTERING & SPECIFIED
ADMIXTURES) for all depths below and upto plinth level
in any shape, position and thickness etc. all complete as
specified, shown and directed. ALL MATERIALS
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
INCLUDING CEMENT SUPPLIED BY THE
CONTRACTOR.
42 S002.18.20 Providing and laying REINFORCED CEMENT CUM 20
CONCRETE OF M-20 GRADE with 20 mm and down
size graded crushed stone aggregates/ gravel in SUB-
STRUCTURE e.g. trenches, culverts, manholes, pipe
encasement, catchpits, drains, pits, etc., applying cement
wash on concrete surface (wherever no other surface
application is specified), providing pockets, openings,
recesses, chamfering, etc., wherever required, vibrating,
tamping, curing and rendering if required to give a
smooth and even surface etc. (EXCLUDING THE COST
OF REINFORCEMENT, SHUTTERING & SPECIFIED
ADMIXTURES) for all depths below and upto plinth level
in any shape, position and thickness etc. all complete as
specified, shown and directed. ALL MATERIALS
INCLUDING CEMENT SUPPLIED BY THE
CONTRACTOR.
43 S002.18.21 Providing and laying REINFORCED CEMENT CUM 150
CONCRETE OF M-25 GRADE with 20 mm and down
size graded crushed stone aggregates/ gravel in SUB-
STRUCTURE e.g. trenches, culverts, manholes, pipe
encasement, catchpits, drains, pits, etc., applying cement
wash on concrete surface (wherever no other surface
application is specified), providing pockets, openings,
recesses, chamfering, etc., wherever required, vibrating,
tamping, curing and rendering if required to give a
smooth and even surface etc. (EXCLUDING THE COST
OF REINFORCEMENT, SHUTTERING & SPECIFIED
ADMIXTURES) for all depths below and upto plinth level
in any shape, position and thickness etc. all complete as
specified, shown and directed. ALL MATERIALS
INCLUDING CEMENT SUPPLIED BY THE
CONTRACTOR.
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
44 S002.19.00 RCC Superstructures - Non FIM Items
45 S002.19.17 Providing and laying REINFORCED CEMENT CUM 100
CONCRETE OF M-30 GRADE with 20 mm and down
size graded crushed stone aggregates/ gravel in SUPER
STRUCTURE in suspended floors, slabs, beams,
columns, walls including counterforts, staircases,
landings, steps, facias, fins, mouldings, gutters, shelves,
window sills, canopies, lintels, girders, ducts, brackets,
chajjas with drip moulds, pedestals, posts, struts,
equipment/ machine foundations, ramps etc. (including
single pour concreting as specified on the drawing),
providing cement wash (wherever no other surface
application is specified), providing pockets, openings,
recesses, chamfering wherever required, vibrating,
tamping, curing and rendering if required to give a
smooth and even surface etc. (EXCLUDING THE COST
OF REINFORCEMENT, SHUTTERING AND SPECIFIED
ADMIXTURES) FOR ALL HEIGHTS UPTO &
INCLUSIVE OF 20 m ABOVE PLINTH LEVEL in any
shape, position, thickness etc. all complete as specified,
shown and directed. ALL MATERIALS INCLUDING
CEMENT SUPPLIED BY THE CONTRACTOR.
46 S002.20.00 RCC Flooring - Non FIM Items
47 S002.20.02 Providing and laying REINFORCED CEMENT Cu.m. 880
CONCRETE OF M-20 GRADE with 20mm and down size
graded crushed stone aggregates / gravel in NON-
SUSPENDED slabs / pavement slabs including
pedestals, ramps etc. leaving pockets, laying in alternate
panels to required slopes, all necessary form work and
finishing the top surface rough or smooth, including cost
of admixtures if used, providing pockets, openings,
recesses, chamfering etc., wherever required, vibrating,
tamping, curing and rendering if required to give a
smooth and even surface etc. (EXCLUDING THE COST
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
OF REINFORCEMENT AND SHUTTERING) for all
depths below and upto plinth level in any shape, position
and thickness etc. all complete as specified, shown and
directed. ALL MATERIALS INCLUDING CEMENT
SUPPLIED BY THE CONTRACTOR.
48 S002.22.00 Precast Elements - Non FIM Items
49 S002.22.07 Manufacturing, transporting, supplying and erecting in CUM 50
position Reinforced Cement Concrete PRECAST
ELEMENTS such as columns, beams, cover slabs,
lintels, louvers, fins, shelves etc. of M-30 grade with
20mm and down size graded crushed stone
aggregates/gravel, each unit upto and inclusive of 500 kg.
for all leads, levels, shapes and thickness including all
moulds, shuttering and centering, vibrating, tamping,
curing, chamfering wherever required, finishing the top
surface with cement mortar 1:3 ( 1 Cement : 3 Sand) to
give a smooth and even surface, or non skid finish as
specified, providing lifting hooks, metal inserts, making
holes pockets, (only M.S. inserts to be measured & paid
separately) transporting to site, erecting, levelling,
aligning and fixing in position with cement mortar 1:3 (
Cement : 3 Coarse Sand), breaking bricks and/or
concrete surfaces and making good the same etc. all
complete (excluding the Cost of Reinforcement ) and as
directed. All materials including cement supplied by the
contractor.
50 S002.22.08 Manufacturing, transporting, supplying and erecting in CUM 200
position Reinforced Cement Concrete PRECAST
ELEMENTS such as columns, beams, cover slabs,
lintels, louvers, fins, shelves etc. of M-30 grade with
20mm and down size graded crushed stone
aggregates/gravel, each unit beyond 500 kg and upto and
inclusive of 1000 kg. for all leads, levels, shapes and
thickness including all moulds, shuttering and centering,
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
vibrating, tamping, curing, chamfering wherever required,
finishing the top surface with cement mortar 1:3 ( 1
Cement : 3 Sand) to give a smooth and even surface, or
non skid finish as specified, providing lifting hooks, metal
inserts, making holes pockets, (only M.S. inserts to be
measured & paid separately) transporting to site,
erecting, levelling, aligning and fixing in position with
cement mortar 1:3 ( Cement : 3 Coarse Sand), breaking
bricks and/or concrete surfaces and making good the
same etc. all complete (excluding the Cost of
Reinforcement ) and as directed. All materials including
cement supplied by the contractor.
51 S002.22.09 Manufacturing, transporting, supplying and erecting in CUM 350
position Reinforced Cement Concrete PRECAST
ELEMENTS such as columns, beams, cover slabs,
lintels, louvers, fins, shelves etc. of M-30 grade with
20mm and down size graded crushed stone
aggregates/gravel, each unit beyond 1000 kg and upto
and inclusive of 2000 kg. for all leads, levels, shapes and
thickness including all moulds, shuttering and centering,
vibrating, tamping, curing, chamfering wherever required,
finishing the top surface with cement mortar 1:3 ( 1
Cement : 3 Sand) to give a smooth and even surface, or
non skid finish as specified, providing lifting hooks, metal
inserts, making holes pockets, (only M.S. inserts to be
measured & paid separately) transporting to site,
erecting, levelling, aligning and fixing in position with
cement mortar 1:3 ( Cement : 3 Coarse Sand), breaking
bricks and/or concrete surfaces and making good the
same etc. all complete (excluding the Cost of
Reinforcement ) and as directed. All materials including
cement supplied by the contractor.
52 S002.22.29 Manufacturing, transporting, supplying and erecting in CUM 850
position Reinforced Cement Concrete PRECAST
ELEMENTS such as manholes, catch-basins, pits, pipe
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
sleepers, box-culverts, drains, trenches, etc. of M-30
grade with 20mm and down size graded crushed stone
aggregates/ gravel, each unit beyond 3000 kg and upto
and inclusive of 5000 kg. for all leads, levels below plinth,
shapes and thickness including all moulds, shuttering and
centering, vibrating, tamping, curing, chamfering
wherever required, providing lifting hooks, metal inserts,
making holes, pockets, (only M.S. inserts to be measured
& paid separately) transporting to site, erecting, levelling,
aligning and fixing in position with cement mortar 1:3
(Cement : 3 Coarse Sand), breaking bricks and/ or
concrete surfaces and making good the same etc. all
complete (excluding the Cost of Reinforcement) and as
directed. All materials including cement supplied by the
contractor.
53 S002.22.29M01 Manufacturing, transporting, supplying and erecting in CUM 1270
position Reinforced Cement Concrete PRECAST
ELEMENTS such as manholes, catch-basins, pits, pipe
sleepers, box-culverts, drains, trenches, etc. of M-30
grade with 20mm and down size graded crushed stone
aggregates/ gravel, each unit beyond 5000 kg and upto
and inclusive of 10000 kg. for all leads, levels below
plinth,
shapes and thickness including all moulds, shuttering and
centering, vibrating, tamping, curing, chamfering
wherever required, providing lifting hooks, metal inserts,
making holes, pockets, (only M.S. inserts to be measured
& paid separately) transporting to site, erecting, levelling,
aligning and fixing in position with cement mortar 1:3
(Cement : 3 Coarse Sand), breaking bricks and/ or
concrete surfaces and making good the same etc. all
complete (excluding the Cost of Reinforcement) and as
directed. All materials including cement supplied by the
contractor
54 S002.23.00 HYD Bars / MS Bars - Non FIM Items
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
55 S002.23.08 Supplying and placing in position HIGH YEILD- MT 2000
STRENGTH DEFORMED STEEL BARS
REINFORCEMENT of Grade Fe500 (D) conforming to
IS:1786, for RCC work including transporting the Steel,
straightening, cleaning, decoiling, cutting, bending to
required shapes and lengths as per details, binding with
18 SWG black soft annealed binding wire at every
intersection, supplying and placing with proper cover
blocks, supports, chairs, overlaps, welding, spacers,
fanhooks etc. for all heights and depths etc. all complete
as directed. SUPPLY OF ALL MATERIAL IN
CONTRACTOR'S SCOPE.
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
plinth level including shuttering for single pour concreting,
strutting, bracing, propping etc., keeping the same in
position during concreting and removal of the same after
specified period etc. for Straight/ Inclined Shuttering,
keeping necessary provision for inserts, projecting
dowels, anchor bolts or any other fixture etc. all complete
and as specified and directed.
60 S002.25.02 Providing and fixing CENTERING AND SHUTTERING in Sq.m. 600
superstrctures in retaining walls, jambs, counter-forts,
buttresses, equipment/ machine foundations,
abutments,columns, lintels, suspended slabs, beams,
staircases, landings, steps, non-circular tunnels/ bunkers/
silos/ shafts/ hoppers/ liquid storage structures etc. for all
heights above plinth level including shuttering for single
pour concreting, strutting, bracing, propping etc., keeping
the same in position during concreting and removal of the
same after specified period etc. for Straight/ Inclined
Shuttering, keeping necessary provision for inserts,
projecting dowels, anchor bolts or any other fixture etc. all
complete and as specified and directed.
61 S002.25.03 Providing and fixing CENTERING AND SHUTTERING for Sq.m. 100
CURVED SHUTTERING in foundations in all types of
Structures such as Chimneys/ Shafts/ Silos/ tunnels/
bunkers/ hoppers/ liquid storage structures/ domes/ ring
wall for tanks, etc. for all depths below and upto &
inclusive of plinth level including shuttering for single pour
concreting, strutting, bracing, propping etc., keeping the
same in position during concreting and removal of the
same after specified period etc. for Straight/ Inclined
Shuttering, keeping necessary provision for inserts,
projecting dowels, anchor bolts or any other fixture etc. all
complete and as specified and directed.
62 S002.25.04 Providing and fixing CENTERING AND SHUTTERING for Sq.m. 50
CURVED SHUTTERING in superstructures in all types of
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
Structures such as Chimneys/Shafts/Silos/
tunnels/bunkers/hoppers /liquid storage structures/
domes etc. for all heights above plinth level including
shuttering for single pour concreting, strutting, bracing,
propping etc., keeping the same in position during
concreting and removal of the same after specified period
etc. for Straight/ Inclined Shuttering, keeping necessary
provision for inserts, projecting dowels, anchor bolts or
any other fixture etc. all complete and as specified and
directed.
63 S002.26.00 Expansion joints - Non FIM Items
64 S002.26.01 Providing 20mm wide EXPANSION JOINTS in flooring m 750
and pavement slabs and ISOLATION JOINTS around
equipment foundations/columns/pedestal/trenches etc.
including cleaning the joints of all loose material, filling
clean sand for the full depth of slab (upto and inclusive of
300 mm) except for 12mm depth from top and sealing the
top 12mm with approved two part liquid polysulphide
Sealing Compound as per IS:12118 etc. all complete as
shown, specified and directed.
65 S002.26.02 Supplying and fixing in position 25mm thick BITUMEN Sq.m. 10
IMPREGNATED FIBRE BOARD conforming to IS:1838 of
approved quality in expansion joints at all locations and
levels in concrete structures etc. all complete as shown,
specified and directed.
66 S002.26.03 Supplying and fixing in position 50 mm (2X25 mm) thick Sq.m. 30
BITUMEN IMPREGNATED FIBRE BOARD conforming to
IS:1838 of approved quality in expansion joints at all
locations and levels in concrete structures etc. all
complete as shown, specified and directed.
67 S002.26.04 Supplying and sealing EXPANSION JOINTS 25 mm wide m 25
and 12mm deep at all locations and levels in Concrete
Structures with approved two part liquid POLYSULPHIDE
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
SEALING COMPOUND as per IS:12118 including raking
of joints etc. all complete as shown, specified and
directed.
68 S002.26.05 Supplying and sealing EXPANSION JOINTS 50 mm wide m 25
and 12mm deep at all locations and levels in Concrete
Structures with approved two part liquid POLYSULPHIDE
SEALING COMPOUND as per IS:12118 including raking
of joints etc. all complete as shown, specified and
directed.
69 S002.28.00 Mechanical Rebar Couplers - Non-FIM items
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
approved make, packed in dual foil, with the help of
dispenser into a hole of diameter and depth as per
manufacture specification, at all levels & locations for
high strength deformed steel reinforcement bars of dia.
upto 12 mm of Grade Fe500D (conforming to IS:1786),
DESIGNED FOR FULL TENSILE ANCHORAGE,
including testing (as per manufacturer's
recommendations), adjusting and making good any
damage done to the structure etc. all complete as
specified and directed. SUPPLY OF ALL MATERIAL IN
CONTRACTOR'S SCOPE EXCLUDING
REINFORCEMENT BARS.
"
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
dispenser into a hole of diameter and depth as per
manufacture specification, at all levels & locations for
high strength deformed steel reinforcement bars of dia.
25 mm & 28 mm of Grade Fe500D (conforming to
IS:1786), DESIGNED FOR FULL TENSILE
ANCHORAGE, including testing (as per manufacturer's
recommendations), adjusting and making good any
damage done to the structure etc. all complete as
specified and directed. SUPPLY OF ALL MATERIAL IN
CONTRACTOR'S SCOPE EXCLUDING
REINFORCEMENT BARS.
"
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
80 S003.04.01M01 Supplying and mixing of approved brand of integral Kg 1500
CRYSTALLINE WATER PROOFING COMPOUND in
cement concrete, cement mortar etc. as per
manufacturer's specifications, to make it leak proof/water
tight etc. all complete as specified and directed.
81 S003.05.00 PVC Water bars - Non FIM Items
82 S003.05.02 Supplying and fixing in position 230mm wide x 5mm thick m 100
approved PVC WATER STOPS as per manufacturer's
specifications in R.C.C. Structures including cutting,
fixing, jointing by vulcanising etc. all complete as shown
specified and directed.
83 S004.00.00 STRUCTURAL STEEL WORKS (REFER
SPECIFICATION NO. 6-68-0006)
84 S004.03.00 General Steel Works - Non FIM Items
85 S004.03.03 Supplying, transporting, storing, fabricating & erecting in MT 50
position and testing/ examining bolted and/ or welded
STRUCTURAL STEEL WORKS of Grade E250A / E250B
(confirming to per IS:2062) at all locations and levels
UPTO & INCLUSIVE OF 20 m ABOVE HPP/ FGL,
including all builtup sections/ compound sections made
out of rolled sections and/or plates/ bent plates in all types
of structural frameworks, floor beams, stairs, or any other
structural items or accessories to support equipments,
piping, conveyor galleries, towers, masts, etc., but
excluding silos, bunkers, hoppers, etc., cutting to required
size, straightening/ bending if required, edge preparation,
cleaning, preheating, bolting/ welding of joints, (including
sealing the joints of box sections with continuous welding
and plugging any open ends & holes of box sections),
finishing edges by grinding, fixing in line and level with
temporary staging & bracing and removal of the same
after erection, grouting with Ordinary Grout or premix free
flow Nonshrink Grout as specified, including preparation
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
and submission of detailed fabrication drawings,
preparing the surface for painting (SSPC-SP-10) and
applying pre-erection/ shop primer (1 coat of F-9 @ 65-75
micron DFT) as per EIL Specification No. 6-79-0020 (or
as per Job Specification, wherever applicable) after
fabrication etc., all complete. SUPPLY OF ALL
MATERIAL IN CONTRACTOR'S SCOPE.
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
87 S004.03.05 "Supplying, Fabricating at CONTRACTOR's shop outside MT 3500
the plant boundary, transporting fabricated items to site,
unloading, storing, erecting in position and testing/
examining , bolted and/ or welded STRUCTURAL STEEL
WORKS of Grade E250A / E250B (confirming to IS:2062
at all locations and levels UPTO & INCLUSIVE OF 20 m
ABOVE HPP/ FGL including all builtup sections/
compound sections made out of rolled sections and/or
plates/ bent plates in all types of structural frameworks,
floor beams, stairs, or any other structural items or
accessories to support equipments, piping, conveyor
galleries, towers, masts, etc., but excluding silos,
bunkers, hoppers, etc., cutting to required size,
straightening/ bending if required, edge preparation,
cleaning, preheating, bolting/ welding of joints, (including
sealing the joints of box sections with continuous welding
and plugging any open ends & holes of box sections),
finishing edges by grinding, fixing in line and level with
temporary staging & bracing and removal of the same
after erection, grouting with Ordinary Grout or premix free
flow Nonshrink Grout as specified, including preparation
and submission of detailed fabrication drawings,
preparing the surface for painting (SSPC-SP-10) and
applying pre-erection/ shop primer (1 coat of F-9 @ 65-75
micron DFT) as per EIL Specification No. 6-79-0020 (or
as per Job Specification, wherever applicable) after
fabrication etc.. all complete. SUPPLY OF ALL
MATERIAL IN CONTRACTOR'S SCOPE.
"
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
HPP/ FGL including all builtup sections/ compound
sections made out of rolled sections and/or plates/ bent
plates in all types of structural frameworks, floor beams,
stairs, or any other structural items or accessories to
support equipments, piping, conveyor galleries, towers,
masts, etc., but excluding silos, bunkers, hoppers, etc.,
cutting to required size, straightening/ bending if required,
edge preparation, cleaning, preheating, bolting/ welding
of joints, (including sealing the joints of box sections with
continuous welding and plugging any open ends & holes
of box sections), finishing edges by grinding, fixing in line
and level with temporary staging & bracing and removal
of the same after erection, grouting with Ordinary Grout or
premix free flow Nonshrink Grout as specified, including
preparation and submission of detailed fabrication
drawings, preparing the surface for painting (SSPC-SP-
10) and applying pre-erection/ shop primer (1 coat of F-9
@ 65-75 micron DFT) as per EIL Specification No. 6-79-
0020 (or as per Job Specification, wherever applicable)
after fabrication etc.. all complete. SUPPLY OF ALL
MATERIAL IN CONTRACTOR'S SCOPE.
"
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
rails) at all location & levels, all complete as specified, in
OFFISTE (COASTAL) areas as well as UNIT (COSTAL)
areas considering environmental classification as
INDUSTRIAL MARINE. SUPPLY OF ALL MATERIAL IN
CONTRACTOR'S SCOPE. (Unit rate based on Structural
steel weight).
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
directed including handling & transporting, straightening if
required, turning from relevant size M.S. rounds to
required diameter, threading, welding, providing
necessary templates and auxilliary dummy structures, if
any, necessary tying and welding with reinforcement,
adjustment of shuttering & reinforcement/any other
fixture, greasing exposed metal surfaces, covering bolts
and packing the sleeves with jute cloth etc. all complete
as specified and directed.(SUPPLY OF ALL MATERIALS
IN CONTRACTOR'S SCOPE).
96 S006.16.00 MS Metal Inserts - Non FIM Items
97 S006.16.01 Supplying, transporting, storing, fabricating and fixing in MT 50
position M.S. METAL INSERT (with lugs) of any shape
made out of flats, plates, rolled sections, pipes etc.
providing necessary templates, staging, cutting,
straightening, if required, bolting, welding as required and
embedding in position on both Plain and Reinforced
Cement concrete members inclusive of adjusting
shuttering & reinforcement/ any other fixture, welding
where necessary, tying and holding to correct level, line
and position, any auxiliary dummy structures to support
the heavy inserts, painting exposed surfaces with a coat
of primer as per EIL Specification No. 6-79-0020, etc. all
complete for all depths and heights as specified and
directed. (SUPPLY OF ALL MATERIALS IN
CONTRACTOR'S SCOPE).
98 S006.17.00 GI Pipe Sleeves - Non FIM Items
99 S006.17.01 Supplying, fabricating and fixing in position G.I. PIPE MT 5
SLEEVES of all diameters including providing necessary
staging, cutting, straightening if required, bolting, welding
as required and embedding in position on both Plain and
Reinforced Cement concrete members inclusive of
adjusting shuttering & reinforcement/any other fixture,
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
welding where necessary, tying and holding to correct
level, line and position, any auxilliary dummy structures to
support heavy sleeves etc. all complete for all depths and
heights as specified and directed.
100 S006.18.00 MS Chequered Plates - Non FIM Items
101 S006.18.01 Supplying, fabricating and erecting in position at all levels MT 20
and locations bolted, screwed and/or welded M.S.
CHEQUERED PLATES of any thickness in walkways,
platforms, stair treads, any other place as directed etc.
including cutting to required size, shape, making holes,
notches, openings of required size, nosing, straightening
if required, making the edges smooth, removing the
burrs, fixing, welding, preparation and submission of
fabrication drawings and preparing the surfaces for
painting and applying shop primer as per EIL
Specification No. 6-79-0020 (or Job Specification,
wherever applicable) after fabrication etc. all complete as
specified and directed. (SUPPLY OF ALL MATERIALS IN
CONTRACTOR'S SCOPE).
102 S006.19.00 MS Grating Cat. A,B - Non FIM Items
103 S006.19.06M01 Supplying, fabricating and erecting in position at all levels MT 70
and locations ELECTROFORGED GALVANISED
GRATING (purchased from approved manufacturer by
the Contractor) conforming to EIL Standard No. 7-68-
0697 and galvanising as per Painting spec 6-79-0020
Rev-0, in walkways, platforms, stair treads etc.including
cutting to required size, shape, making holes, notches,
openings of required size, nosing, straightening if
required, making the edges smooth, removing the burrs,
fixing with manufacturer's supplied galvanised clamps,
preparation and submission of fabrication drawings, all
complete as specified and directed (SUPPLY OF ALL
MATERIALS IN CONTRACTOR'S SCOPE).
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
104 S006.22.00 MS Rungs - Non FIM Items
105 S006.22.01 Supplying, fabricating, fixing and keeping in position M.S. Kg. 100
RUNGS in R.C.C. works at all depths and heights
including handling, transporting the steel to site workshop
and site of work, straightening, if required, cutting,
bending to shape, necessary tying and welding with
reinforcement, adjustment of shuttering, cleaning, surface
preparation, shop primer as per EIL Spec. 6-79-0020 (or
Job Specification, wherever applicable) and two coats of
anticorrosive paint of approved quality on the exposed
portion of rungs etc. all complete as specified and
directed (SUPPLY OF ALL MATERIALS IN
CONTRACTOR'S SCOPE).
106 S006.23.00 Hand Railing 1000mm - Non FIM Items
107 S006.23.01 Supplying, fabricating and fixing in position at all locations m 100
1000mm high INCLINED HAND RAILING (for staircases)
consisting of top rail, mid rail and vertical posts
(Maximum spacing 1500mm c/c) with 32mm nominal
diameter medium grade M.S. Tubes conforming to
IS:1239 including straightening if required, cutting,
bending, welding, bolting, grouting with ordinary grout,
cleaning, surface preparation, hot-dip galvanising (80-85
micron as per IS:4759, IS:2629, IS: 4736, IS:2633), shop
primer (1 coat of P6 of 40 micron) as per Sl. No. 8.1 of
Table 8.0 of EIL SPEC. 6-79-0020 (or as per Job
Specification, wherever applicable), preparation and
submission of fabrication drawings etc. all complete as
specified, shown and directed. (SUPPLY OF ALL
MATERIALS IN CONTRACTOR'S SCOPE). (Complete
handrail work shall be measured as length of top rail only
and not length of each element fixed).
108 S006.23.03 Supplying, fabricating and fixing in position at all locations m 1600
1000mm high HORIZONTAL HAND RAILING (for
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
platforms, walkways, etc. or any other location as
directed) consisting of top rail, mid rail and vertical posts
(Maximum spacing 1500mm c/c) with 32mm nominal
diameter medium grade MS Tubes conforming to IS:1239
and 100x5 MS Toe Plate confirming to IS:2062 (Grade
A/B), including straightening if required, cutting, bending,
welding, bolting, grouting with ordinary grout, cleaning,
surface preparation, hot-dip galvanising (80-85 micron as
per IS:4759, IS:2629, IS: 4736, IS:2633), shop primer (1
coat of P6 of 40 micron) as per Sl. No. 8.1 of Table 8.0 of
EIL SPEC. 6-79-0020 (or as per Job Specification,
wherever applicable), preparation and submission of
fabrication drawings etc. all complete as specified, shown
and directed. (SUPPLY OF ALL MATERIALS IN
CONTRACTOR'S SCOPE). (Complete handrail work
shall be measured as length of top rail only and not length
of each element fixed).
109 S006.24.00 Hand Railing 500mm - Non FIM Items
110 S006.24.01 Supplying, fabricating and fixing in position at all locations m 10
500mm HIGH INCLINED HAND RAILING (for stair
cases) consisting of top rail & vertical posts (maximum
spacing 1500mm c/c) with 32mm nominal diameter
medium grade M.S. Tubes conforming to IS:1239
including straightening if required, cutting, bending,
welding, surface preparation, hot-dip galvanising (80-85
micron as per IS:4759, IS:2629, IS: 4736, IS:2633), shop
primer (1 coat of P6 of 40 micron) as per Sl. No. 8.1 of
Table 8.0 of EIL SPEC. 6-79-0020 (or as per Job
Specification, wherever applicable), preparation and
submission of fabrication drawings etc. all complete as
specified, shown and directed. (SUPPLY OF ALL
MATERIALS IN CONTRACTOR'S SCOPE). (Complete
handrail work shall be measured as length of top rail only
and not length of each element fixed).
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
111 S006.24.02 Supplying, fabricating and fixing in position at all locations m 50
500mm high HORIZONTAL HAND RAILING (for
platforms, walkways, etc. or any other location as
directed) consisting of top rail, mid rail and vertical posts
(Maximum spacing 1500mm c/c) with 32mm nominal
diameter medium grade MS Tubes conforming to IS:1239
and 100x5 MS Toe Plate confirming to IS:2062 (Grade
A/B), including straightening if required, cutting, bending,
welding, bolting, grouting with ordinary grout, cleaning,
surface preparation, hot-dip galvanising (80-85 micron as
per IS:4759, IS:2629, IS: 4736, IS:2633), shop primer (1
coat of P6 of 40 micron) as per Sl. No. 8.1 of Table 8.0 of
EIL SPEC. 6-79-0020 (or as per Job Specification,
wherever applicable), preparation and submission of
fabrication drawings etc. all complete as specified, shown
and directed. (SUPPLY OF ALL MATERIALS IN
CONTRACTOR'S SCOPE). (Complete handrail work
shall be measured as length of top rail only and not length
of each element fixed).
112 S006.25.00 Mechanical Anchor fastners - Non FIM Items
113 S006.25.01 Supplying, handling, transporting to site of work and fixing Each 25
approved MECHANICAL ANCHOR FASTENERS M.S.
bolts of Grade 5.8 or more, GALVANIZED with minimum
thickness of 5 microns (approved for use in cracked
concrete), of 12mm dia at specified positions on concrete
floors, roofs, beams (sides and bottom), walls, columns
etc. according to manufacturer's specifications including
all accessories like nuts, washers etc. of required size,
testing, necessary scaffolding, drilling of the holes in
concrete surface with electric drill, cleaning of holes with
air blowout & wire-brush, and making good any damage
done to the structure etc. all complete for all heights,
depths and locations as specified and directed.
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
114 S006.25.02 Supplying, handling, transporting to site of work and fixing Each 25
approved MECHANICAL ANCHOR FASTENERS M.S.
bolts of Grade 5.8 or more, GALVANIZED with minimum
thickness of 5 microns (approved for use in cracked
concrete), of 16mm dia at specified positions on concrete
floors, roofs, beams (sides and bottom), walls, columns
etc. according to manufacturer's specifications including
all accessories like nuts, washers etc. of required size,
testing, necessary scaffolding, drilling of the holes in
concrete surface with electric drill, cleaning of holes with
air blowout & wire-brush, and making good any damage
done to the structure etc. all complete for all heights,
depths and locations as specified and directed.
115 S006.25.03 Supplying, handling, transporting to site of work and fixing Each 25
approved MECHANICAL ANCHOR FASTENERS M.S.
bolts of Grade 5.8 or more, GALVANIZED with minimum
thickness of 5 microns (approved for use in cracked
concrete), of 20mm dia at specified positions on concrete
floors, roofs, beams (sides and bottom), walls, columns
etc. according to manufacturer's specifications including
all accessories like nuts, washers etc. of required size,
testing, necessary scaffolding, drilling of the holes in
concrete surface with electric drill, cleaning of holes with
air blowout & wire-brush, and making good any damage
done to the structure etc. all complete for all heights,
depths and locations as specified and directed.
116 S006.25.04 Supplying, handling, transporting to site of work and fixing Each 25
approved MECHANICAL ANCHOR FASTENERS M.S.
bolts of Grade 5.8 or more, GALVANIZED with minimum
thickness of 5 microns (approved for use in cracked
concrete), of 24mm dia at specified positions on concrete
floors, roofs, beams (sides and bottom), walls, columns
etc. according to manufacturer's specifications including
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
all accessories like nuts, washers etc. of required size,
testing, necessary scaffolding, drilling of the holes in
concrete surface with electric drill, cleaning of holes with
air blowout & wire-brush, and making good any damage
done to the structure etc. all complete for all heights,
depths and locations as specified and directed.
119 S006.26.02 Supplying, handling, transporting to site of work and fixing Each 25
approved CHEMICAL ANCHOR FASTENERS consisting
of M.S. threaded rod of Grade 5.8, GALVANIZED with
minimum thickness of 5 microns and chemical (approved
for use in cracked concrete), packed in flexible chemical
foil or dual foil type, to be used with the help of
dispenser, of 16mm dia. at specified positions on
concrete floors, roofs, beams (sides and bottom), walls,
columns etc. according to manufacturer's specifications
including all accessories like nuts, washers etc. of
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
required size., testing, necessary scaffolding, drilling of
the holes in concrete surface with electric drill, cleaning of
holes with air blowout & wire-brush and making good any
damage done to the structure etc. all complete for all
heights, depths and locations as specified and directed.
120 S006.26.03 Supplying, handling, transporting to site of work and fixing Each 25
approved CHEMICAL ANCHOR FASTENERS consisting
of M.S. threaded rod of Grade 5.8, GALVANIZED with
minimum thickness of 5 microns and chemical (approved
for use in cracked concrete), packed in flexible chemical
foil or dual foil type, to be used with the help of
dispenser, of 20mm dia. at specified positions on
concrete floors, roofs, beams (sides and bottom), walls,
columns etc. according to manufacturer's specifications
including all accessories like nuts, washers etc. of
required size., testing, necessary scaffolding, drilling of
the holes in concrete surface with electric drill, cleaning of
holes with air blowout & wire-brush and making good any
damage done to the structure etc. all complete for all
heights, depths and locations as specified and directed.
121 S006.26.04 Supplying, handling, transporting to site of work and fixing Each 25
approved CHEMICAL ANCHOR FASTENERS consisting
of M.S. threaded rod of Grade 5.8, GALVANIZED with
minimum thickness of 5 microns and chemical (approved
for use in cracked concrete), packed in flexible chemical
foil or dual foil type, to be used with the help of
dispenser, of 24mm dia. at specified positions on
concrete floors, roofs, beams (sides and bottom), walls,
columns etc. according to manufacturer's specifications
including all accessories like nuts, washers etc. of
required size., testing, necessary scaffolding, drilling of
the holes in concrete surface with electric drill, cleaning of
holes with air blowout & wire-brush and making good any
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
damage done to the structure etc. all complete for all
heights, depths and locations as specified and directed.
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
127 S007.09.02 Providing and laying BRICK MASONRY WITH BRICKS Cu.m. 700
OF CLASS 5.0 in cement mortar 1:6 (1 Cement : 6 Sand)
in one or more brick thickness and in any shape
(excluding circular/curved brick masonry) at all heights
above plinth level including the cost of materials, labour,
scaffolding/ staging, sampling & testing, soaking of
bricks, cutting and laying of bricks, providing recesses,
making openings of any shape & size, finishing the joints
flush below ground level and raking out the joints above
ground level, sealing the gap between masonry and soffit
of beam/slab, embedding the fittings & fixtures, curing,
etc. all complete as per specifications. ALL MATERIALS
INCLUDING CEMENT SUPPLIED BY THE
CONTRACTOR.
128 S010.00.00 DEMOLISHING AND DISMANTLING (REFER
SPECIFICATION NO. 6-68-0012)
129 S010.01.00 Brickwork - Non FIM Items
130 S010.01.01 Demolishing BRICKWORK (taking all necessary safety Cu.m. 2
precautions) for all depths below plinth level including
supply of all tools and tackles, necessary scaffolding,
propping, underpinning, cleaning and stacking of
serviceable material, disposal of unserviceable material
to spoil heaps anywhere within the plant boundary, all
complete as specified and directed. (Excavation &
backfilling shall be paid separately under relevant
items).
131 S010.01.02 Demolishing BRICKWORK (taking all necessary safety Cu.m. 5
precautions) for all heights above plinth level including
supply of all tools and tackles, necessary scaffolding,
propping, underpinning, cleaning and stacking of
serviceable material, disposal of unserviceable material
to spoil heaps anywhere within the plant boundary, all
complete as specified and directed.
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
132 S010.02.00 RCC - Non FIM Items
133 S010.02.01 Demolishing RCC WORK (taking all necessary safety Cu.m. 50
precautions) for all depths below plinth level including
supply of all tools & tackles, necessary scaffolding,
propping, underpinning etc., cutting, straightening,
scraping and cleaning of reinforcement bars, stacking of
serviceable materials, disposal of unserviceable material
to spoil heaps anywhere within the plant boundary, all
complete as specified and directed. (Excavation &
backfilling shall be paid separately under relevant
items).
134 S010.02.02 Demolishing RCC WORK (taking all necessary safety Cu.m. 10
precautions) for all heights above plinth level including
supply of all tools & tackles, necessary scaffolding,
propping, underpinning etc., cutting, straightening,
scraping and cleaning of reinforcement bars, stacking of
serviceable materials, disposal of unserviceable material
to spoil heaps anywhere within the plant boundary, all
complete as specified and directed.
135 S010.02.03 Chipping of RCC WORK (taking all necessary safety Sq.m. 10
precautions) by CHISELLING, upto & inclusive of 25mm
thickness including supply of all tools & tackles,
necessary scaffolding, propping, underpinning etc.,
cutting, lapping/welding of reinforcement bars as per
drawings, disposal of the unserviceable material to spoil
heaps anywhere within the plant boundary, all complete at
all heights and depths, as specified and directed.
(Excavation and backfilling shall be paid separately under
relevant items).
136 S010.02.04 Chipping of RCC WORK (taking all necessary safety Sq.m. 10
precautions) by CHISELLING, beyond 25mm and upto &
inclusive of 50mm thickness including supply of all tools &
tackles, necessary scaffolding, propping, underpinning
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
etc., cutting, lapping/welding of reinforcement bars as per
drawings, disposal of the unserviceable material to spoil
heaps anywhere within the plant boundary, all complete at
all heights and depths, as specified and directed.
(Excavation and backfilling shall be paid separately under
relevant items).
137 S010.02.05 Chipping of RCC WORK (taking all necessary safety Sq.m. 5
precautions) by CHISELLING, beyond 50mm and upto &
inclusive of 100mm thickness including supply of all tools
& tackles, necessary scaffolding, propping, underpinning
etc., cutting, lapping/welding of reinforcement bars as per
drawings, disposal of the unserviceable material to spoil
heaps anywhere within the plant boundary, all complete at
all heights and depths, as specified and directed.
(Excavation and backfilling shall be paid separately under
relevant items).
138 S010.02.06 Chipping of RCC WORK (taking all necessary safety Cu.m. 2
precaution) by CHISELLING for thickness more than
100mm for all depths below plinth level including supply
of all tools & tackles, scaffolding, propping, underpinning,
etc. exposing, cutting, lapping/welding the reinforcement
bars as per drawings & cleaning the same by wire
brushing, washing the exposed surfaces, disposal of the
unserviceable material to spoil heaps anywhere within the
plant boundary, all complete as specified and directed.
(Excavation and backfilling shall be paid separately under
relevant items).
139 S010.02.07 Chipping of RCC WORK (taking all necessary safety Cu.m. 2
precaution) by CHISELLING for thickness more than
100mm for all heights above plinth level including supply
of all tools & tackles, scaffolding, propping, underpinning,
etc. exposing, cutting, lapping/welding the reinforcement
bars as per drawings & cleaning the same by wire
brushing, washing the exposed surfaces, disposal of the
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
unserviceable material to spoil heaps anywhere within the
plant boundary, all complete as specified and directed
140 S010.02.11 Making cut-outs in RCC slab/ wall upto a thickness of Cu.m. 2
400mm (taking all necessary safety precautions) by
vibration-less spark-free mechanical means like core-
cutting, wet cutting by diamond wall saw system at all
depths & heights including supply of all tools & tackles,
necessary scaffolding etc. cutting of reinforcement bars,
disposal of unserviceable material, plastering & finishing
the cut surfaces, all complete as specified and directed
by the Engineer-in- Charge (Measurement on Plan/
Elevation Area basis).
141 S010.03.00 Pockets - Non FIM Items
142 S010.03.01 Making POCKETS/HOLES of sizes upto & inclusive of Each 10
200 x200x500mm in RCC/PCC works (taking all
necessary safety precautions) by chiselling/drilling,
including supply of all tools & tackles, necessary
scaffolding etc. cutting of reinforcement bars, cleaning the
pockets of all debris, disposal of the unserviceable
material to spoil heaps anywhere within the plant
boundary all complete at all heights & depths as specified
and directed.
143 S010.04.00 PCC _ Non FIM Items
144 S010.04.01 Demolishing PLAIN CEMENT CONCRETE work (taking Cu.m. 10
all necessary safety precautions) for all depths below
plinth level including supply of all tools & tackles,
necessary scaffolding, propping, underpinning etc.
disposal of unserviceable material to spoil heaps
anywhere within the plant boundary, all complete as
specified and directed. (Excavation and backfilling shall
be paid separately under relevant items)
145 S010.04.02 Demolishing PLAIN CEMENT CONCRETE work (taking Cu.m. 2
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
all necessary safety precautions) for all heights above
plinth level including supply of all tools & tackles,
necessary scaffolding, propping, underpinning etc.
disposal of unserviceable material to spoil heaps
anywhere within the plant boundary, all complete as
specified and directed.
146 S010.06.00 Steelwork - Non FIM Items
147 S010.06.01 Dismantling bolted/rivetted/welded STRUCTURAL MT 5
STEEL WORK of all descriptions (taking all necessary
safety precautions), including supply of all tools and
tackles, consumables, necessary scaffolding etc.,
providing temporary bracings as required, cutting (by
flame or saw) gusset plates, bolts, nuts, weldings etc.,
transporting and stacking of the serviceable materials,
cleaning the site of work of all unserviceable materials for
disposal to spoil heaps anywhere within the plant
boundary, all complete at all depths and heights, as
specified and directed.
148 S011.00.00 MISCELLANEOUS ITEMS (REFER SPECIFICATION
NO. 6-68-0013)
149 S011.02.00 Anticorrosive - Non FIM Items
150 S011.02.01 Providing and laying 50mm thick ANTI-CORROSIVE Sq.m. 50
LAYER under steel storage tanks with screened dry
coarse sand mixed with A90 grade bitumen conforming to
IS:73 including mixing in drum, heating to the required
temperature, with 3% kerosene if required, tamping,
dressing to the required slopes to form hard mass of
specified compacted thickness etc. all complete as
directed.
151 S011.03.00 Cutting RCC Piles - Non FIM Items
152 S011.03.01 Cutting the heads of R.C.C. piles of diameter upto Each 1500
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
600mm and a length not exceeding 1500mm including
exposing/ cleaning, bending of the reinforcement, making
site clean for casting of pile cap and removal of debris to
the spoil heaps within the plant boundary etc. all complete
as specified & directed. (Excavation; if any, to be
measured separately under respective item).
153 S011.04.00 Building pile heads - Non FIM Items
154 S011.04.05 Providing and building up pile heads of diameter upto Cu.m. 200
600mm in RCC of grade M30 with 20mm and down size
graded crushed stone aggregates/ gravel including all
shuttering but excluding the cost of reinforcement (to be
measured under respective item) all complete as
directed.
155 S011.05.00 Hard core - Non FIM Items
156 S011.05.01 Supplying and laying to proper level and slopes, HARD Cu.m. 5
CORE in any thickness with broken/crushed stones (of
150mm and down size) as sub base in pavements, floor
slabs etc. including hand packing wedging, blinding with
murrum/sand, watering, ramming, rolling with a roller or
hand rammer where roller is inaccessible, compacting,
dressing etc. all complete as specified and directed.
157 S011.06.00 Sand Filling - Non FIM Items
158 S011.06.01M01 Supplying and filling approved MANUFACTURED SAND Cu.m. 1200
of specified quality under floors, in foundations, plinths,
tank foundations etc. for all depths and heights including
cost of sand,royalties, transportation to site for all leads
and lifts,including loading, unloading, spreading in layers
of loose thickness not exceeding 150mm,watering,
ramming, compacting with mechanical compactors
and/or other equipment to the specified levels to achive
85% relative density as per IS:2720 Part XIV,including
preparation of subgrade to the required slope, providing
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
testing apparatus and testing the degree of consolidation
all complete as per drawings, specifications and direction
of Engineer-in-charge.The rates shall be inclusive of the
cost of all labour,material,equipments etc. all complete .
159 S011.07.00 DPC - Non FIM Items
160 S011.07.01 Providing and laying 40mm thick DAMP PROOF Sq.m. 5
COURSE with plain cement concrete of nominal mix of
1:1.5:3 with 10mm & down size graded crushed stone
aggregates in two layers of 20mm thick with two coats of
hot bitumen (Grade A90/S90 conforming to IS:73) applied
@ 1.7 Kg/sq.m. over each layer as per specifications
including cleaning, watering the top surface of walls,
centering, shuttering, placing, tamping, curing, sprinkling
an even layer of dry & sharp sand over the hot bitumen
etc. all complete as specified and directed.
161 S014.00.00 BONDING FRESH CONCRETE TO OLD CONCRETE
BY EPOXY RESIN BONDING SYSTEM (REFER
SPECIFICATION NO. 6-68-0056)
162 S014.01.00 Epoxy Resin - non FIM Items
163 S014.01.01M01 Providing and applying approved EPOXY RESIN Kg. 10
(prepared as per manufacturer's recommendation) for
bonding of fresh concrete to old concrete in all types of
structure at all depths and heights including
excavation,backfilling, removal of surplus earth, keeping
pit dry by pumping/bailing subsoil water, cleaning of
concrete surface, removing of all loose concrete pieces,
making rough by chiselling, taking off the skin of
concrete, application of Epoxy Resin System by spraying,
necessary working platforms, props, scaffolding and other
safety measures, removal of same after completion etc.
all complete as specified and directed. (Excavation,
backfilling, removal of surplus earth shall be paid
separately under relevant items).
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
164 S018.00.00 MECHANICAL WORKS.
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
materials within a lead of 100m etc. as directed including
providing temporary support to existing structures, service
lines like water pipes, sewage pipes, electric overhead
and underground cable etc. all complete. Contractor shall
plan and obtain prior permission before commencement
of work well in advance. Contractor shall store the
chemicals in a safe manner under his custody.
170 S999.99.99V03 Earthwork in excavation below ground level for all kind of CUM 10
works excluding general site grading, roads, and
embankments by CHEMICAL BLASTING in hard rocks
using approved chemicals of adequate capacity as per
design requirement and taking necessary permissions
from the owner/local statutory bodies, obtaining
necessary licenses etc. for a depth beyond 1.5m and upto
& inclusive 3.0m including all related work for blasting
such as drilling, supplying, storage, making necessary
safety measures around the area, chiseling and cutting to
required levels, dressing & trimming of sides, leveling &
grading of bottoms, dewatering of accumulated water
from any source and keeping the surface dry for
subsequent works & disposal of spoils to spoil heaps and
stacking of usable excavated materials within a lead of
100m etc. as directed including providing temporary
support to existing structures, service lines like water
pipes, sewage pipes, electric overhead and underground
cable etc. all complete. Contractor shall plan and obtain
prior permission before commencement of work well in
advance. Contractor shall store the chemicals in a safe
manner under his custody.
171 S999.99.99V04 Earthwork in excavation below ground level for all kind of CUM 10
works excluding general site grading, roads, and
embankments by CHEMICAL BLASTING in hard rocks
using approved chemicals of adequate capacity as per
design requirement and taking necessary permissions
from the owner/local statutory bodies, obtaining
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
necessary licenses etc. for a depth beyond 3.0m upto &
inclusive 4.5m including all related work for blasting such
as drilling, supplying, storage, making necessary safety
measures around the area, chiseling and cutting to
required levels, dressing & trimming of sides, leveling &
grading of bottoms, dewatering of accumulated water
from any source and keeping the surface dry for
subsequent works & disposal of spoils to spoil heaps and
stacking of usable excavated materials within a lead of
100m etc. as directed including providing temporary
support to existing structures, service lines like water
pipes, sewage pipes, electric overhead and underground
cable etc. all complete. Contractor shall plan and obtain
prior permission before commencement of work well in
advance. Contractor shall store the chemicals in a safe
manner under his custody.
172 S999.99.99V05 Earthwork in excavation below ground level for all kind of CUM 10
works excluding general site grading, roads, and
embankments by CHEMICAL BLASTING in hard rocks
using approved chemicals of adequate capacity as per
design requirement and taking necessary permissions
from the owner/local statutory bodies, obtaining
necessary licenses etc. for a depth beyond 4.5m upto &
inclusive 6.0m including all related work for blasting such
as drilling, supplying, storage, making necessary safety
measures around the area, chiseling and cutting to
required levels, dressing & trimming of sides, leveling &
grading of bottoms, dewatering of accumulated water
from any source and keeping the surface dry for
subsequent works & disposal of spoils to spoil heaps and
stacking of usable excavated materials within a lead of
100m etc. as directed including providing temporary
support to existing structures, service lines like water
pipes, sewage pipes, electric overhead and underground
cable etc. all complete. Contractor shall plan and obtain
prior permission before commencement of work well in
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
advance. Contractor shall store the chemicals in a safe
manner under his custody.
173 S999.99.99V06 Earthwork in excavation below ground level for all kind of CUM 10
works excluding general site grading, roads, and
embankments by CHEMICAL BLASTING in hard rocks
using approved chemicals of adequate capacity as per
design requirement and taking necessary permissions
from the owner/local statutory bodies, obtaining
necessary licenses etc. for a depth beyond 6.0m upto &
inclusive 7.5m including all related work for blasting such
as drilling, supplying, storage, making necessary safety
measures around the area, chiseling and cutting to
required levels, dressing & trimming of sides, leveling &
grading of bottoms, dewatering of accumulated water
from any source and keeping the surface dry for
subsequent works & disposal of spoils to spoil heaps and
stacking of usable excavated materials within a lead of
100m etc. as directed including providing temporary
support to existing structures, service lines like water
pipes, sewage pipes, electric overhead and underground
cable etc. all complete. Contractor shall plan and obtain
prior permission before commencement of work well in
advance. Contractor shall store the chemicals in a safe
manner under his custody.
Schedule of Rates
for
Architecture Works
Tender
CIVIL/STRL & UG PIPING WORK
Name
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
1 A000.00.00 ARCHITECTURE
2 A002.00.00 FLOOR FINISHING
3 A002.03.00 Providing and laying average 50mm thick heavy duty
flooring in panels consisting of base course of 35mm
thick cement concrete (1 cement : 1.5 coarse sand : 3.5
stone aggregates of 10mm to 6mm size by volume) laid
over sub-base and 15mm thick finishing layer consisting
of cement and integral hardening compound mixed in
ratio of 4 cement :1 hardenar (by weight) :2 stone
agrgregates of 6mm and down size laid integral with base
course and finished smooth including cleaning the sub-
base surface, applying neat cement slurry @2.75 Kg of
cement per Sq.M of area over sub-base to receive the
base course, levelling, tamping, trowelling, finishing,
curing, providing shuttering to the edges etc. all complete.
4 A002.03.01 CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR Sq.M. 5210
COST.
5 A002.06.00 Providing and fixing panel dividers in flooring/dado
including maintaining slope, line, chipping of the uneven
base, grinding etc. all complete.
6 A002.06.06 P.V.C. panel dividers ( 3mm x 40mm size.) RM 10000
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
max.600mm c/c including fixing the frame with
masonry/RCC/metal frame work for partitions etc. by
means of 300mm x 25mm x 6mm M.S. holdfasts welded
to spacers and grouted with M-15 grade concrete in min.
350mm x 100mm x 100mm sized hole in masonry/96 mm
long 12mm dia dash fasteners, bolting with metal frame
work, making provisions for hinges, locking devices, other
hardwares by machine cutting and providing 3mm thick
M.S. pad plates at all areas of hardware fixation, welding
etc. painting of all metallic surfaces by 2 coats of
synthetic enamel paint (approved shade, ICI or approved
equivalent over red oxide zinc chromate
primer/electrostatic powder coating of approved shade
,25 micron), finishing etc. all complete.
9 A004.01.03 Frames painted with electrostatic Powder coating. For RM 1430
fraame size(assorted size out of) Overall 125mm x 60mm
section.
10 A004.02.00 Providing and fixing pressed steel sheet door shutter
consisting of 18 SWG pressed steel sheet bent to form
hollow box of 40mm overall thickness, mitred, welded at
meeting with 6mm thick M.S. flat all along the perimeter,
forming square edges at corners and braced with channel
shaped, 35mm wide 16 SWG M.S. sheet horizontal
stiffener @ 500mm max. including providing heavy duty
150mm long M.S. butt hinges conforming to IS : 1341 @
600mm max. spring loaded pressure die cast zinc alloy
door stopper, for each shutter, providing approved shade
electrostatic powder coating (25 micron) /2 coats of
Synthetic enamel painting (approved shade ICI or
approved equivalent) over approved quality red oxide zinc
chromate primer coating for all the metallic surfaces etc.
all complete.
11 A004.02.06 Single shutter with 3 way spring loaded locking and Sq.M. 8
latching system. Painted with Electrostatic powder
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
coating.
12 A004.02.08 Double shutter with 3-way spring loaded locking and Sq.M. 50
latching system and pressure dia cast zinc alloy door
handles 300mm long on both sides. Painted with
Electrostatic powder coating.
13 A004.02.10 Extra for providing neoprene rubber beading (10mm x RM 48
10mm size) angular, continuous along the door frame
rebate fixed with neoprene rubber adhesive.
14 A004.03.00 Providing and fixing steel glazed/louvered
window/ventilator consisting of steel sections, as per IS :
7452/1361/1038 for framework and shutters, joints
mitred, electrically flash butt welded to form solid, true
edges, corners and glazing (fixed to the frame work by
means of putty, glazing clips)/18 SWG M.S. sheet louvers
welded to frame as per EIL standard No. 7- 75-031
including fixing the windows/ventilators to masonry/RCC
by means of 100mm x 15mm x 6mm M.S. lugs welded to
frame @ maximum 750mm c/c and grouted with M-15
grade concrete in min. 150mm x 50mm x 50mm sized
hole in masonry/96mm long, 12mm dia dash fastener,
painting with two coats of synthetic enamel paint
(approved make) of approved shade over a coat of
approved quality of red oxide zinc chromate primer (for
steel surfaces), mastic filling, providing and fixing friction
hinges, brass handles, striking plate, stay, push fit
weather bars etc. all complete.
15 A004.03.07 Fixed type M.S. sheet louvered window/ventilator with Sq.M. 685
sections as per / IS : 7452/ IS-1361.
16 A004.04.00 Supplying and fixing fully glazed anodized ( 25 micron) /
electrostatic powder coated (25 micron, approved shade)
aluminium doors / windows /partitions /ventilators
including frame & shutter with approved make extruded
tubular aluminium sections and glass fixed with rubber
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
lining and anodized/powder coated aluminium beading
including fixing the frame to masonry/RCC by counter
sunk 100mm long brass screw and dash fastener to M-20
grade concrete in minimum 150mm x 150mm x 50mm
sized block (for brick masonry only)/RCC, finishing,
making good of any damaged work etc. all complete. .
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
22 A005.01.17 Plain cement plaster with waterproofing compound Sq.M 600
conforming to IS-2645 (CICO/ approved equivalent)
mixed to cement mortar @ 3% by weight, Average 12mm
thick 1:4 (1 cement : 4 sand) Cement supplied by the
Contractor at their cost.
23 A005.01.19 Plain cement plaster with waterproofing compound Sq.M 150
conforming to IS-2645 (CICO/ approved equivalent)
mixed to cement mortar @ 3% by weight. Average 6mm
thick 1:4 (1 cement : 4 sand) Average 6mm thick 1:4 (1
cement : 4 sand). Cement supplied by the Contractor at
their cost.
24 A006.00.00 ROOFING TREATMENT
25 A006.02.00 Providing and laying cement concrete (1 cement : 2
coarse sand : 4 aggregate) over concrete surfaces, laid to
slope at all heights including, finishing, curing, tamping
etc. all
26 A006.02.01 Cement supplied by the Contractor at their cost. Cu.M 15
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
this treatment at rain water outlet points; providing
finishing protective layer of 35 mm thk. P.C.C. (1:2:4) in
panels of maximum size 1200mm x 1200mm chequered
finish with 24 SWG chicken wiremesh interposed in
between finished smooth with joints between panels
sealed with suitable polyurethane sealant; providing fillets
of 75 mm radius with P.C.C. (1:2:4) at junctions of
horizontal and vertical surfaces finished smooth;
providing 450mm x 450mm khuras (rain water collecting
pits) in 1:2:4 cement concrete at all outlets, levelled down
by min. 25mm, finishing, curing etc. all complete as per
approved manufacturer's standard specifications and
recommendations. .
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
wall/ RCC) and smoothening the surface with sand paper
etc., preparation of surface etc. all complete as per the
approved manufacturers recommendations and
directions of Engineer-in-charge.
33 A008.00.00 ROOFING
34 A008.12.00 Providing and fixing rain water pipes with M.S. holder
clamps including fixing/embedding into
masonry/concrete, providing connections like shoes,
vents, specials, bends etc. fixing in perfect plumb etc. all
complete.
35 A008.12.05 110mm dia O.D. Size. exposed PVC rain water pipe RM 1136
jointed with bonding solution of approved quality and
make with pressure rating of 4kg/cm2 including clamps,
connections etc. all as per approved manufacturer's
details.
36 A008.12.07 110mm dia O.D. Size. embedded PVC rain water pipe RM 78
jointed with bonding solution of approved quality and
make with pressure rating of 4kg/cm2 including clamps,
connections etc. all as per approved manufacturer's
details.
37 A008.15.00 Providing and laying in position approved quality profiled, Sq.M 2280
pre-coated galvanished steel sheets (0.60mm thickness)
in roofing, cladding including cutting, mitering, laps,
providing cut outs for fixing accessories, necessary
fasteners (approved quality anticorrove polymer coated,
rivets, nut, bolts,hooks etc. all corrosion proof polymer
capping & washers)etc. all complete.
38 A008.16.00 Providing and fixing in position roofing accessories like Sq.M 600
ridge piece, corner piece, north light curve piece, Apron
piece, gutter, flashing etc. fabricated out of approved
quality pre coated glavanised steel sheet (0.60mm thick).
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
bent and profiled to match with the roofing and cladding
including all cutting fabrication, welding,riveting fasteners
etc.all complete.
39 A008.17.00 Providing and laying in position approved quality profiled, Sq.M 12980
precoated, steel sheets (for roofing, cladding etc.) made
from cold rolled high tensile Zincalume/ Galvalume Steel
of 550 MPA yield stress conforming to IS:513, IS:14246
and ASTM AS: 1397; the substrate shall be hot dip
metallic coating of aluminium- zinc alloy (150 grams per
sq. mtr. total on both sides, coating class AZ150); the
bottom unexposed surface shall be provided with alkyd
backer of minimum 7 microns; top exposed surface shall
have SMP (Silicon Modified Polyester) paint system
minimum 20 microns in approved shade applied over 5
microns primer; overall coated thickness of sheets not
less than 0.55mm, profile depth not less than 28mm and
pitch not more than 190mm; including cutting, mitering,
laps, providing cutouts for fixing accessories, necessary
fastners (approved quality anti corrosive polyester
polymer coated, rivets, nuts, bolts, self drilling screws/
fasteners with integral washers and EPDM seals, and
nylon colour caps and natural cure type joint sealants
etc.) All complete as per approved manufacturer's
specifications.
40 A008.18.00 Providing and laying in position roofing and cladding Sq.M 3245
accessories like ridge piece, corner piece, north light
curve piece, apron piece, gutter, flashing etc. fabricated
out of 0.5mm precoated Zincalume/ Galvalume Steel
steel sheets of same material/ quality etc. as that of
sheeting; bent and profiled to match with the roofing and
cladding, including all cutting, fabrication, rivetting,
fastners etc. all complete.
41 A008.20.00 Providing and fixing in position (for roofing and cladding) Sq.M 115
machine made 2mm thick corrugated polycarbonate
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
sheets (conforming to IS :14434, 14443) of approved
manufacturer (in approved shade) extruded from
polycarbonate resin, having profiles as approved/
matching exactly with the surrounding pre-coated roofing/
cladding sheets and having following properties:
(a) Specific gravity 1.2 g/ cm3
(b) Hardness 119 M Scale
(c) Tensile Strength 64 Mpa
(d) Compressive strength 66Mpa
(e) Impact Strength 900 J/m
The item includes fixing to steel structure members
(truss/ purlins)/ brick masonry walls by means of polymer
coated 'J' or 'L' hooks, bolts, nuts 8mm dia G.I. bitumen
washers etc. all complete as per approved
manufacturer's recommendations and specifications.
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
cleats inter locking each other to forn the grid work of
600mm of 600mm size (max) fixing the aluminium wall
angles with dash fastners etc. all complete.
45 A010.02.00 Providing and fixing false ceiling tiles over false ceiling
grid framework by means of hold down clips (at four
corners of each tile and one in centre of each side) as per
desired pattern at desired height, including providing
necessary cut- outs for electrical /A.C./Fire fighting
fixture, making the false ceiling perfectly levelled and
aligned etc. all complete.
46 A010.02.03 12.5mm thick false ceiling tiles made of Gypsum board Sq.M 30
conforming to IS : 2095, having thermal resistance of
0.08Sq.M K/W categorised as Class-1 when tested to BS
476: Part-7, painted with approved shade plastic
emulsion paint conforming to IS :5411 and screw fixed to
the under size of false ceiling grid work with 12.5mm dia
dry wall screw @ 230mm c/c including finishing the joints
in the board flush with fillers and tape etc. as per
manufacturer's spec. to give a smooth. seamless ceiling
etc. all complete.
47 A010.11.00 Providing and fixing underdeck insulation consisting of Sq.M 150
40mm thick resin bonded fibre/ mineral wool board
conforming to IS : 8183, Group-1 (having density of 31-
50kg/ m3 faced with aluminium foil, as `non-combustible'
as per BS 476 Part-4) fixed to RCC slab etc. by means
of approved quality adhesive and providing and fixing
3mm thick 190mm x 100mm x 25mm `L' shaped MS
slotted cleats to the slab soffit etc. with dash fasteners @
600mm c/c both ways, securing the insulation with
chicken wire netting stretched tautly over the insulation
and held by 14 SWG GI wire tied diagonally through the
slots of cleats etc. all complete.
48 A011.00.00 MISCELLANEOUS ITEMS
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
49 A011.06.00 Providing and laying plinth protection with Bldg. drain as
per EIL STD. No. 7-75-0065 consisting of
50 A011.06.01 Plinth protection of PCC (1:3:6) laid over rammed earth to Sq.M 816
slope and trowel finished. Cement supplied by the
Contractor at their cost.
51 A011.06.03 Building drain consisting of brick work, PCC (1:3:6) laid Sq.M 480
over rammed earth and finished with 15mm thick plain
cement plaster topped with neat cement finish @ 2.75kg.
of cement per Sq.M of area including finishing curing etc.
all complete. Cement supplied by the Contractor at their
cost.
52 A011.06.06 Extra for providing 600mm long MS grating drain cover as Unit 1070
per EIL STD No. 7-75-0065 made of 40mm x 6mm M.S.
flat framework with 40mm x 6mm MS flats welded @
35mm c/c including providing & fixing 50mm x 50mm x
6mm M.S. angle frame fixed to concrete portion of the
drain.
53 A999.00.00 Miscellaneous
54 A999.99.00 Miscellaneous
55 A999.99.99V01 Supplying and laying homogeneous, approved premium SQM 150
quality, double charge with nano finish, full body vitrified
tiles of 600mm x 600mm x 10mm (+ or - 5%) thick size of
approved colour/ design/ texture (Digital prints/ Granite/
marble/wooden effect) and of approved make (KAJARIA,
JOHNSON, or approved equivalent) over floor and in
skirting/dado in desired pattern and combination with
Manufacturer specified tile fixing adhesive including
preparation, levelling and cleaning of base floor/ surface
to receive tiles in perfect level, finishing the joints with
white cement slurry mixed with matching pigment
cleaning, finishing etc., complete in all respects.
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
56 A999.99.99V02 Providing and fixing partly fixed steel glazed with 5.5mm SQM 300
thick wired glass conforming to IS:5437 and partly
louvered ventilator consisting of steel sections, as per IS :
7452/1361/1038 for framework and shutters, joints
mitred, electrically flash butt welded to form solid, true
edges, corners and glazing (fixed to the frame work by
means of putty, glazing clips)/18 SWG M.S. sheet louvers
welded to frame as per EIL standard No. 7- 75- 031
including fixing the ventilators to masonry/RCC by means
of 100mm x 15mm x 6mm M.S. lugs welded to frame @
maximum 750mm c/c and grouted with M-15 grade
concrete in min. 150mm x 50mm x 50mm sized
hole in masonry/96mm long, 12mm dia dash fastener,
painting with two coats of synthetic enamel paint
(approved make) of approved shade over a coat of
approved quality of red oxide zinc chromate primer (for
steel surfaces), mastic filling, providing and fixing friction
hinges, brass handles, striking plate, stay, push fit
weather bars etc. all complete.
Schedule of Rates
for
Electrical Works
Tender
CIVIL/STRL & UG PIPING WORK
Name
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
1 EE ELECTRICAL
2 E207.00.00 G.I. PIPES
3 E207.01.00 Supply and laying of following sizes of G.I. Pipes
(medium) in required length fixed on steel, concrete or
similar structure, laid in trenches, ready to be buried in
concrete including cutting, threading, bending and similar
works, supply of clamps, small iron structures, spacers
and installation of seats, plugs, bushings etc., small civil
works, including all labour and materials, as per approved
drawings, specifications of this tender and directions of
Engineer-in-Charge.
4 E207.01.02 50 mm NB. M 300
Rate in Rupees
S. No. Item No Description of Items Unit Quantity Amount in Rs.
Figures Words
providing anti-corrosive paint or bitumen and jute
covering for welded portion, clamping and necessary
hardware for connecting, etc., including all labour and
materials, as per approved drawings, specifications of
this tender and directions of Engineer-in-Charge.
13 E403.01.02 50 x 6 mm M 2750
14 E403.01.03 40 x 5 mm M 300
15 E403.01.04 20 x 3 mm M 200