Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Maintaining Efficiency,
MANUFACTUR ING L OCAT IONS
OF F ICE L OCAT IONS
Simplified specification
Local support and advice Environmental leadership
process
Tested to the highest standard NACE and FROSIO qualified Over 40 years track record
including to Norsok M-501 technical sales in the offshore industry
International Paint has a long history in offshore asset protection, moving from the birth of the offshore
oil and gas industry, through the rapid growth of the North Sea oil and gas fields from the late 1960s,
to the expansion of offshore wind in the 21st century. This experience could be invaluable to you when
considering protection for wave and tidal assets and this can give you the advantage.
The main coatings system that we use on the Pelamis P2 machines is based around Interzone 954, a reliable and robust
As with structures in all environments which includes cyclic testing of salt for corrosion protection of offshore assets. offshore coating. For its specific use on the Pelamis WEC, International Paint produced a specific painting specification
it is important to be confident that spray, condensation and UV exposure, for application for our sub-contractors in order to produce a reliable coatings system.
the coatings provided will give attempting to mimic real life conditions. These standards should be used
the necessary protection for The high regard for the ISO 20340 as a guide to the most appropriate International Paints Intergard is also applied to the insides of the power modules to keep them bright and clean for ongoing
the lifetime of the asset. standard has led to its adoption as specification for your asset; however O&M work. Intersleek was used on some sub-sea systems that require to be free of marine fouling for reliable operation.
a fundamental part of the internationally nothing can compare to real life
The offshore industry uses accelerated track record and experience. We chose International Paint as they are a worldwide company with an extensive product range that is widely used
recognised NORSOK M501 standard.
testing to qualify suitable systems. and specified in the offshore industry. Our experience using their products on previous machines was good,
NORSOK M501 uses the ISO 20340
The baseline for standards in offshore with the coatings available being both robust and easily repairable.
standard to offer what is currently the
environments should be ISO 20340, most encompassing view on requirements Previous coatings systems considered by Pelamis required specialist application systems and locations depending on the
paint type used. We required a non-site specific paint system that could be readily applied in both our facilities and those
of a sub-contractor, and one that would also allow in-service repairs to damaged zones.
We specify our coatings system to meet a design life of 20 years, and by consulting International Paint we were provided with
Offshore Renewables a suitable coatings system to meet our design needs. We also appreciate that in the offshore environment there may be a
In the 21st century; International Paint a greater wealth of knowledge and in production, or are planned next- requirement for repair of any coating system, and this was also an important influencing factor in our selection of paint system.
has been able to use extensive expertise in marine and subsea generation devices. Our experience
knowledge of the protection environments. in this area includes tidal turbines, Pelamis Wave Power
of offshore structures in a new floating oscillating water column (OWC)
industry offshore wind. International Paint is now transferring devices, wave energy convertors,
this knowledge to wave and tidal hinged flap assets and devices which
In offshore wind we are using our devices. Our long track record has pump water onshore for pumped hydro
experience to protect submerged been selected as the coating supplier power generation.
assets and those in the splashzone, of choice for a range of devices
typically foundations and transition which have either already undergone
pieces. This has helped us to generate significant in-water testing, are currently
Whats important to you? Recommended Systems
Seagen
Twin Tidal Turbine
Marine Current Turbines
Products: Interzinc 52 | Interline 975 | Intershield 300 Products: Interzone 954 | Intershield 300 |
Intersleek Tie-Coat | Intersleek Tie-Coat |
Intersleek Foul Release Intersleek Foul Release
www.international-pc.com
pc.communication@akzonobel.com
G8_WAVETIDAL_UK
AN02801_141209
and and all product names mentioned in this publication are trademarks of, or licensed to, AkzoNobel. AKZONOBEL 2013.
International Paints Protective Coatings business has used its best endeavours to ensure that the information contained in this publication is correct
02/13
at the time of printing. Please contact your local International Paints Protective Coatings business representative if you have any questions.
Unless otherwise agreed by us in writing, any contract to purchase products referred to in this brochure and any advice which we give in connection
with the supply of products are subject to our standard conditions of sale.