Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
01
URGENT
CONTENTS
1. INTRODUCTION ................................................................
........................................................................
........................................ 3
2. RECOMMENDATIONS BEFORE
BEFORE THE INSTALLATION .................... 3
2.1. PC requirements and OS compatibility................................
compatibility....................................................
.................................................... 3
2.2. Before beginning the installation................................
installation ............................................................
............................................................ 4
3. RECOMMENDATIONS BEFORE
BEFORE THE UPGRADE............................
UPGRADE ............................ 4
4. INSTALLATION................................
INSTALLATION ................................................................
...........................................................................
........................................... 4
5. MANAGEMENT ................................................................
..........................................................................
.......................................... 8
5.1. Other Servers detection ................................................................
..........................................................................
.......................................... 8
5.2. Installing a patch ................................................................
...................................................................................
................................................... 8
5.3. Installing Linux on an inactive partition ..................................................
.................................................. 9
5.4. Standard
Standard installation of a complete version ..........................................
.......................................... 10
5.5. Installing the GD/GA/GD3/GA3/INTIP3/IOIP3 binary ........................... 15
8. CORRECTIONS................................
CORRECTIONS ................................................................
.........................................................................
......................................... 20
9. KNOWN RESTRICTIONS
RESTRICTIONS ...........................................................
........................................................... 20
1
Legal notice:
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent.
2
OmniPCX Enterprise
INSTALLING AND USING THE OmniPCX
Enterprise PC INSTALLER V3.4 SOFTWARE
1. INTRODUCTION
The software OmniPCX Enterprise PC Installer allows to install versions, patches, Linux on inactive
partition and GD/GA/GD3/GA3/INTIP3/IOIP3 binary on an OmniPCX Enterprise Releases 5.1.x,
6.x and higher.
The software OmniPCX Enterprise PC Installer 3.4 is available on Alcatel-Lucent Enterprise Business
Portal (https://businessportal.alcatel-lucent.com) and it is delivered from following OmniPCX
Enterprise versions:
Release R9.1 : i1.605.40
Release 10.0 : j1.410.50
Release R10.1 : j2.501.16.b
Note: The function IOIP3 on board INTIP3 is unavailable until OmniPCX Enterprise release R10.1
included.
CAUTION
If a Firewall is available on the server PC, the OmniPCX Enterprise PC Installer application cannot
operate as long as the filtering rules of firewall have not been changed to allow the application to
receive packets on 67/UDP (BOOTP/DHCP), 69/UDP, 20/TCP and 21/TCP (FTP) ports from any
system on the subnetwork of the PC.
If an other application of DHCP, TFTP or FTP server type is installed on the server PC, the associated
server(s) must not be started.
4. INSTALLATION
The installation of the software OmniPCX Enterprise PC Installer is done with InstallShield with
the help of setup.exe.
In this example, the installation is done in the default directory
C:/Program Files/Alcatel-Lucent/OmniPCX Enterprise PC Installer
Select the CD-ROM of the software OmniPCX Enterprise PC Installer or the drive on which the
OmniPCX Enterprise version is located (under repertory
/dhs3mgr/"version or patch"/pcmao/boot_res/pcinstall)
Run setup exe . The following window is displayed:
Select the language of the installation, French or English and click on Next.
The following window is displayed:
Click on Next.
The following window is displayed:
Click on Next.
Note
If the size of PATH variable in environment parameter is higher than 250 characters a warning
window appears, click on OK.
A new information window shows modifications of the value in PATH system variable (delete
several same variables Value), click on OK.
Click on OK and validate the automatic start of "Computer Browser" windows service at the end
of software installation.
At the end of installation, the following window is displayed:
At the end of the installation process you can view the README.txt file that contains the
delivery note with the list of new corrections, paragraph 7 & 8.
Click on Finish.
5. MANAGEMENT
In the menu Preferences, select the drive that contains the patch.
In the field Installation type, select the type of installation to "Call handling or
patch".
Note
A TFTP server and a FTP server are running during all the installation of the patch and are stopped
only when the window OmniPCX Enterprise PC Installer is closed.
Note
A FTP server is running during all the installation of the patch and is stopped only when the window
OmniPCX Enterprise PC Installer is closed.
In Call Server Type, select the type of the CPU to install (Alize, 4400, Appliance_server,
Blade Server or CS-2).
In Call handling version, select the complete version or the complete version+
patch,
In Country, select the country.
In Installation type, select Standard installation.
In Network type, select the type of installation to Direct cable.
In Network Interface, select the network board interface used.
In Client IP Address, the IP address allocated to the Call Server is displayed.
In Ethernet Address, dont set the Ethernet address (_not needed_) of the CPU.
Click on Apply and the following window is displayed with the grayed button Apply.
For A4400 (CPU5, CPU6, CPU7 with 4400 method) Call Server
During the boot process it is mandatory to enter the Bios menu to force the boot on the
Ethernet using the following process:
From CPU5 or CPU6 bios boot menu, select 5 - Booting from Ethernet
Network or from CPU7 BIOS Loader Menu, select 03 - Load From Ethernet
(4400 method) ; see Note 2.
Select Standard Installation.
Enter the complete version (+ patch if necessary) and the country.
Enter the Linux version preceded by % (Linux version can be read under
\dhs3mgr\version\pcmao\boot_res\bootp\linux)
Boot
Boot Menu :
1 - Booting From Floppy #0
2 - Booting From Floppy #1
3 - Booting From Hard Disk #0
4 - Booting From Hard Disk #1
5 - Booting From Ethernet Network
6 - Default Boot Sequence
> 5
Booting From Ethernet Network
Updating bootinfo
Note 1
In addition of TFTP and FTP servers, a DHCP server is activated during a standard installation and
stops only when the window Installation Parameters is closed.
Closing the application OmniPCX Enterprise PC Installer stops the three servers TFTP, FTP and
DHCP.
CPU7 >
In Media Gateway board designation, select the board type (GD/GA, GD3/GA3, INTIP3
or IOIP3).
In Media Gateway binary versions, select the version.
In Network type, select the type of installation to Direct cable.
In Network Interface, select the network board interface used.
In IP Address, the IP address allocated to the GD/GA/GD3/GA3/INTIP3/IOIP3 is displayed.
In Ethernet Address dont set the Ethernet address (_not needed_) of the
GD/GA/GD3/GA3/INTIP3/IOIP3.
Click on Apply and the following window is displayed with the grayed button Apply.
Note
In addition of TFTP server, a DHCP server is activated during installation of
GD/GA/GD3/GA3/INTIP3/IOIP3 binaries and stops only when the Installation Parameters
window is closed.
Closing the application OmniPCX Enterprise PC Installer stops the two servers TFTP and DHCP.
The complete process for reformatting and reloading Flash NAND memory of
GD/GA/GD3/GA3/INTIP3/IOIP3 is explained in technical communication TC0521 Reformatting and
reloading the e-MGD Nand Flash with PC Installer.
At the end of the uninstallation, a message indicates that the uninstallation is completed, but
some elements could not be removed: A program will delete automatically these elements by
clicking on OK.
7. EXTENDED FEATURES
From version 2.23, PC Installer supports a new country K2, used for the BiCS installation.
From version 2.24, PC Installer supports a new client: CS-2.
From version 2.26, PC Installer supports new clients: GD3 and INTIP3.
From version 3.1, PC Installer can be installed on Windows 7.
From version 3.4, PC Installer supports a new client: IOIP3.
8. CORRECTIONS
crms00377481 PC Installer 3.4: Wrong parameters in menu "Media Gateway board designation".
crms00329062 PC Installer 3.3: Incomprehensible error message displayed by PC-Installer.
crms00344501 PC Installer 3.3: Flashing through pcx installer tool is not possible in case of IOIP3.
crms00316346 PC Installer 3.3: Impossible to flash a GD/GA with PC-Installer.
IOIP3 PC INSTALLER PC Installer 3.3: IOIP3 binary load through PC installer -binary version
picklist NOK.
crms00218529 PC Installer 3.2: Some Chinese String label on PC Installer cannot show righ.
crms00218531 PC Installer 3.2: Need to manual reboot the pbx after a linux+callhandling
installation when using PC Installer on Win7.
crms00218540 PC Installer 3.2: PCinstaller will not automatically change it start language after
System change it locally.
crms00232208 PC Installer 3.2: Win7: For successive installation of patch in Call server windows7
PC needs restart which shouldn't be the case.
crms00234300 PC Installer 3.2: OmniPCX Installer on Win 7: Console window
"C:\PROGRA~1\ALCATE~1\OMNIPC~1/bin.ftpd.exe" pops up.
crms00240257 PC Installer 3.2: OmniPCX Installer on Win 7: CS-2 installation fails.
crms00240260 PC Installer 3.2: OmniPCX Installer on Win 7: Warning message "Browser: service is
not started" pops up.
crms00200392 PC Installer 3.1: PC Installer on Windows 7.
crms00197834 PC Installer 2.26: NGP PC Installer - INTIP3 Picklist NOK.
Abstract: Do the desired modifications for the INTIP3 pick list to display the required
version number.
crms00182355 PC Installer 2.25 : NGP PC Installer.
Abstract: Make Enhance PC installer to support with GD3, INTIP3A, INTIP3B, GA3
boards.
crms00043284 PC Installer 2.25: Linux 55.0: Installation Complete Not OK.
Abstract: Remove: Linux+call handling"/"Reload Linux" menu in PC Installer.
crms00159859 PC Installer 2.24: Add CS-2 to the pick list.
Abstract: Addition of CS-2 to the dropdown list and generation of the dhcpd.conf
file for the requested configuration.
9. KNOWN RESTRICTIONS
No known restriction.