Sei sulla pagina 1di 1

International Conference on Advances & Challenges in Interdisciplinary Engineering and Management 44

International Conference on Advances & Challenges in Interdisciplinary Engineering and


Management 2017 [ICACIEM 2017]

ISBN 978-81-933235-1-9 VOL 01


Website icaciem.org eMail icaciem@asdf.res.in
Received 10 January 2017 Accepted 28 - January 2017
Article ID ICACIEM087 eAID ICACIEM.2017.087

Failure Investigation on Armature Plate to Enhance


Durability
M Vigneshwaran1, S Vijay PraveenKumar2, M Yuvaraj3, G P Yuvaraj Thirumalaivasan4, J Anantharaj5, R Aniruttha6
1,2,3,4,5,6
UG Students, Department of Mechanical Engineering,
Vidyaa Vikas College of Engineering and Technology, Tiruchengode, India

Abstract: In this study, a failure component of armature plate is used in picanol loom. This armature plate is used to stop auto loom suddenly. In
one side of armature plate clutch is fitted and another side brake. The main focuses of the project is fracture and wear analysis, one of the fractured
armature plate is retrieved to identify the cause of failure. The investigations included the visual examination, chemical analysis, hardness, micro-
structural characterization, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and wear measurement is carried out in order to
determine the cause and solution of this failure. A failure investigation has been conducted on a picanol loom consisting of a drive clutch and brake.
The armature plate is made from an EN 3 material. The first visual examination and chemical analysis is very must and after hardness and micro-
structural characterization is applied.

ISBN 978-81-933235-1-9 VOL 01


Website icaciem.org eMail icaciem@asdf.res.in
Received 10 January 2017 Accepted 28 - January 2017
Article ID ICACIEM088 eAID ICACIEM.2017.088

Smart Drip System Using for Agriculture System


G JayaPrakash1, M Appu Samy3, M Sabari Nathan4, S Sulthanbasha5
1,2,3,4,5
Vidyaa Vikas College of Engineering and Technology, Tiruchengode, India

Abstract: Agriculture is the back bone of India. To make the sustainable agriculture, this system is proposed. In this system ARM 9 processor is used
to control and monitor the irrigation system. Different kinds of sensors are used. This paper presents a fully automated drip irrigation system which is
controlled and monitored by using ARM9 processor.PH content and the nitrogen content of the soil are frequently monitored. For the purpose of
monitoring and controlling, GSM module is implemented. The system informs user about any abnormal conditions like less moisture content and
temperature rise, even concentration of CO2 via SMS through the GSM module.

This paper is prepared exclusively for International Conference on Advances & Challenges in Interdisciplinary Engineering and Management 2017 [ICACIEM
2017] which is published by ASDF International, Registered in London, United Kingdom under the directions of the Editor-in-Chief Dr K Samidurai and Editors
Dr. Daniel James, Dr. Kokula Krishna Hari Kunasekaran and Dr. Saikishore Elangovan. Permission to make digital or hard copies of part or all of this work for
personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage, and that copies bear this
notice and the full citation on the first page. Copyrights for third-party components of this work must be honoured. For all other uses, contact the
owner/author(s). Copyright Holder can be reached at copy@asdf.international for distribution.

2017 Reserved by Association of Scientists, Developers and Faculties [www.ASDF.international]

Potrebbero piacerti anche