Sei sulla pagina 1di 18

Abstract of Cost

Name of work :- Repair of balcony, main gates & other misc. work
type qtrs at 220 KV GSS D

S No. Item Qty. Rate Unit Amount


Part-A (Building & Sanitary) Based on PWD BSR 2014 Dausa Circle
B-67/13.1
Repairs to plaster of thickness 12mm to 20mm in patches of
area 2.5 sq. metres and under including cutting the patch in
proper shape, raking out joints and preparing and plastering
1 25.00 147.00 Sqm 3675.00
the surface of the walls complete including disposal of
rubbish to the dumping ground within 50 m lead :With
cement mortar 1 :4 ( 1 cement : 4 coarse sand)

B-71/14.7.3
Demolishing brick work manually/ by mechanical means
2 including stacking of serviceable material and disposal of 3.00 372.00 Cum 1116.00
unserviceable material within 50 metres lead as per direction
of Engineer-in-charge. In cement mortar.

B-78/14.59
Demolishing CC/R.C.C. work by mechanical power driven
means and stockpiling at designated locations and disposal of
3 dismentled material up to to lead of 50 m, stacking 3.00 919.00 Cum 2757.00
serviceable and unserviceable material seperately including
cutting reinforcement bars

B-20/5.9.3
Half brick masonry in Superstructure , above plinth level
4 upto floor V level using bricks of designation 75 Cement 14.00 398.00 Sqm 5572.00
mortar 1 : 6 (1 cement : 6 coarse sand)
B-50/11.3.1
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate) finished with a floating coat of neat
cement including cement slurry, making of lines or groove
5 20.00 259.00 Sqm 5180.00
etc complete but excluding the cost of nosing of steps etc.
complete.40mm thick with 20mm thick nominal size
aggregate

B-71/14.2.1
Demolishing cement concrete manually/ by mechanical
6 means including disposal of material within 50 metres lead as 2.00 441.00 Cum 882.00
per direction of Engineer-in- charge.1: 3: 6 or richer mix.
B-11/3.1.6
Providing and laying in position cement
concrete including curing, compaction etc. complete in
7 specified grade excluding the cost of centering and shuttering 2.00 3087.00 Cum 6174.00
- All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand :
8 graded stone aggregate 40 mm nominal size).

B-45/10.17.1
Grading roof for water proofing treatment with
8 water proffing compound Cement concrete 1:2:4 (1 cement : 5.00 4401.00 Cum 22005.00
2 coarse sand : 4 graded stone aggregate 20 mm nominal
size)
B-46/10.22
Providing gola 75x75 mm in cement concrete 1:2:4 (1
9 cement : 2 coarse sand : 4 stone aggregate 10mm and down 50.00 91.80 Mtr. 4590.00
gauge) including finishing with cement mortar 1:3 (1 cement
: 3 fine sand) as per standard design :

B-67/13.4.1
10 Renewing glass panes, with putty and nails 2.00 561.00 Sqm 1122.00
wherever necessary: Float glass panes of thickness 4 mm

Page 1
B-40/9.28.1

Providing and fixing steel glazed window frame made


out of 80x40 mm hollow sheet section of 16 gauge thickness,
joint mitred welded and grinded including hold fast of steel
lugs 13mm x 3mm and 15 Cm long embedded in C C block
15 x 10 x 10 Cm of 1:3:6 nominal concrete and including
fixing of pivoted hinges of superior quality, window shutters
made out of 50 x 25.0 mm hollow steel section 15 mm paitam
of 18 gauge thickness, joint mitred and grinded including
11 10mm x 10mm square bars welded to frame for paitam 10.00 2996.00 Sqm 29960.00
fixing float glass 4mm thick panes with glazing clips and
metal sash putty and fixing of shutters frames peg stay, U
shape handle 100 mm long, tower bolts 100 mm long of steel
powder coated superior quality including fixing and jointing
with frame hinges priming coat with steel primer complete in
all respect as per direction of Engineer-in charge Window
openable.

B-40/9.26

12 Supplying and fixing fixed wire gauge of 14 mesh x 24 10.00 564.00 Sqm 5640.00
gauge to the metal frame of rolled section by metal beading
20x3mm with suitable screw at not exceeding 150mm
distance.
B-40/9.27
13 60.00 62.00 Kg 3720.00
Providing and fixing Square bars or other flat welded to
window, ventilatiors etc.
B-69/13.24
Labour charges for repair to door / window
14 without using any material such as applying randha 20.00 170.00 Sqm 3400.00
(finishing) tightening of bolts & screw etc.
B-57/12.3.2
Plaster on new surface on walls in cement sand mortar 1:6
15 including racking of joint etc. complete fine finish : 20mm 30.00 121.00 Sqm 3630.00
thick.
Finishing walls with Acrylic Smooth exterior paint of
required shade including all scaffolding. New work (Two or
16 more coat applied @ 1.67 ltr/10 sqm over and including base 55.00 81.00 Sqm 4455.00
coat of water proofing cement paint applied @ 2.20 kg/ 10
sqm ).

B-63/12.45.2
Painting exterior surface of wall with 100%
acrylic exterior paint of approved brand and manufacture to
17 give an even shade with two or more coats including sand 100.00 45.00 Sqm 4500.00
papering prime coat, making smooth surface with cement
based putty old work.

B-64/12.48.2
Painting with synthetic enamel paint of approved brand and
18 manufacture to give an even shade : 80.00 25.00 Sqm 2000.00
One or more coats on Old work
B-38/9.8.1
Providing and fixing steel gate, grating , and grills made
of angles, tees, square bars, flats,or black pipe with holdfast
19 150.00 88.00 Kg 13200.00
and fittings complete as per design and drawing including
cutting welding and fabrication with priming coat of red
oxide

Page 2
B-39/9.17.1+9.17.2
Providing and fixing M.S. sheet 1mm thick Double
leaf door shutter in angle iron frame 35x35x5mm suitabilly
diagonally braced with 25x3mm flat iron above and below
20 lock rail of size 50x5mm beading extra including all fittings, 16.00 3038.40 Sqm 48614.40
as per direction of Engg. incharge but excluding cost of
chowkhats: including two coats of anit-corrosive red oxide
primer paint

Page 3
B-37/9.5
Providing and fixing T-iron frames for doors,
windows and ventilators of mild steel Tee-sections, joints
mitred and welded with 15x3 mm lugs 10cm long embedded
in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement :
21 3 coarse sand : 6 graded stone aggregate 20 mm nominal 130.00 73.00 Kg 9490.00
size) or with wooden plugs and screws or rawl plugs and
screws or with fixing clips or with bolts and nuts as require
including fixing of necessary butt hinges and screws and
applying a priming coat of approved steel primer.

B-37/9.2
Structural steel work riveted, bolted or welded in built up
22 sections, trusses and framed work, including cutting, hoisting 100.00 73.00 7300.00
(height upto 10 m) , fixing in position and applying a
priming coat of approved steel primer all complete:
B-11/3.1.2
Providing and laying in position cement concrete
23 including curing, compaction etc. complete in specified grade 1.00 4324.00 Cum 4324.00
excluding the cost of centering and shuttering - All work up
to plinth level. M15 grade Nominal Mix

B-64/12.48.1
Painting with synthetic enamel paint of approved brand and
24 manufacture to give an even shade : 200.00 55.00 Sqm 11000.00
Two or more coats on new work
B-59/12.22
Providing and applying white cement based putty
25 over plastered surface to prepare the surface even and smooth 20.00 101.00 Sqm 2020.00
complete
S-13/2.1.1
P & F G.I. pipes (Internal Work) with G.I.
26 Fittings excluding union (IS:1239 Mark) & MS clamps
including cutting and making good the walls and floors:
(a) Exposed on wall 15 mm dia Nominal bore class B 25.00 168.00 Mtr 4200.00
(b) Exposed on wall 25 mm dia Nominal bore class B 15.00 277.00 Mtr 4155.00
S-17/2.11.1
27 P & F Ball Cock (IS :1703 Mark) with Rod 10.00 228.00 Each 2280.00
& P.V.C. Ball complete :Brass wt.400 gm,15mm.
S-31/3.17.3
P&F rigid PVC Pipe (IS:4985 mark) class
28 II/ (4 Kg. /Cm2.) approved quality /make including joining 100.00 188.00 Mtr 18800.00
the pipe with solvent cement rubber ring and lubricant.110
mm dia
S-32/3.18
P&F rigid PVC pipe fittings (IS: 4985 mark) of
29 approved quality /make including joining the pipe with
solvent cement rubber ring and lubricant
(a) Bend 45 Dg 110mm dia 15.00 89.00 Each 1335.00
(b) Bend 87.5 Dg 110mm dia 15.00 112.00 Each 1680.00
S-27/3.2.1
Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm
30 nominal size) all around S.W. pipe including 15 Cm. thick 20.00 396.00 Mtr 7920.00
bed concrete (Width W= Diameter of pipe in Cm+30 Cm.)
( Excluding cost of pipe) 100mm dia S.W. pipe

Page 4
S-35/3.20.1
Construction of manhole in all type of soil
inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10
Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick
inside plaster in CM 1:6, finished with floating neat cement,
31 50mm thick M-15 grade C.C. flooring, making channels, 3.00 4320.00 Each 12960.00
80mm thick stone slab covering with 40mm thick M-15
grade C.C. flooring, Cement cover with frame of 450mm dia,
earthwork etc. complete as per design including disposal of
surplus earth within 50 mtr. lead.Depth up to 0.5 M

Page 5
S-35/3.22.1
Construction of chamber in all type of soil
with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C.
1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6,
finished with floating neat cement, 50mm thick M-15 grade
32 C.C. flooring , earthwork etc. complete as per design 2.00 758.00 Each 1516.00
including disposal of surplus earth within a lead of 50
mtr.Inside size 300 X 300 mm depth upto 0.5 M Cement
cover with frame.

S-34/3.19.1

33 Raising manhole cover and frames slab to required level 2.00 648.00 Each 1296.00
including dismantling existing slab and making good the
damage as required (raising depth of manhole masonry to be
paid separately). Rectangular manhole 90x60 cm
S-36/3.23.3
Construction of soakage well in all type of soil with 300 mm
thick dry masonry, top and bottom 300 mm course in CM 1:6,
80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal,
34 Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork 1.00 12672.00 Each 12672.00
complete as per approved drawing including disposal of earth
within a lead of 50 mtr.: Size 240 Cm. dia outside & 240 Cm.
depth.

S-36/3.28.1
Construction of septic Tank in all types of soil with 40 Cm
.thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10,
M-15 grade C.C flooring & over stone slab covering ,80 mm
thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50
mm thick stone partition walls, 20 mm thick plaster in CM
35 1:6 finished with neat floating cement, 4 Nos C.I foot rests of 1.00 20570.00 Each 20570.00
approved design ,two No. 450 mm dia each Ferro cement
cover with frame, earth work etc. complete as per approved
drawing including disposal of surplus earth within a lead of
50 mtr:- Size 200x100x130 cm.(for 10 users)

S-1/1.2.2
P & F Indian type white glazed vitreous china 1st quality W.C.
36 orissa pan (IS :2556 Mark) with 100 mm vitreous china P or 1.00 2067.00 Each 2067.00
S trap including cutting and making good the wall and floor:
Size 580x440mm.

S-2/1.10
37 Labour charges for removing W.C. pan (any type) of all sizes 1.00 217.00 Each 217.00
with care including all necessary fittings P or S trap.
Total 297994.40
Add T.P. @5 % above 14899.72
Total PART (A) 312894.12
Part B (Item Rate )
Cleaning of manhole including disposal of sludge outside the
premises area and dirty water including minor repair work of
1 plaster and floor of size upto 900x600 mm and depth upto 4.00 360.00 Each 1440.00
1.00 mtr.
P&F Brass handles (weight not less than 200 gm each) in
2 existing steel section window including removal of existing 5.00 155.00 Per Pair 775.00
broken pieces including cost of screws etc.
Disposal of wastages, garbage, stones, rubbish etc. after
collecting from various locations scattered throughout the
3 GSS premises with manual/mechanical help and carriage 20.00 180.00 Cum 3600.00
upto 5.00 Km. lead from GSS premises complete in all
respect.

Page 6
Removing / scraping existing Elgae / Fungae from existing
roof top surface by scraping with wire brush / MS strip
complete including collecting rubbish and preparing /
cleaning the surface for proper applying water proofing
4 treatment on existing lime terrace / CC grading including 100.00 18.00 Sqm 1800.00
Batta / Gola et c., the disposal of rubbish from site to outside
the premises with all lead and lift and transportation charges
etc.

Applying water proofing compound prepared with 1 part of


SIOKLAT and 2 part of cement and adding water to make a
5 proper solution to applying on existing damage surface with 100.00 206.00 Sqm 20600.00
the help of paint brush in two or more coats wherever
required.

Repairing the existing Qtr b/wall main gate including


removing the gate and refixing the gate at required level in
position after repairing work including doing the required
welding wherever required including the cost of hiring of
6 welding machine from shop to site and back including cost 4.00 4000.00 Each 16000.00
of welding rod,cost of steel bars and all T&P, which is
required complete in all respect as per direction of Engineer
in charge

Total part B 44215.00


Total part (A+B) ###

Add 5.50% above for contingencies , Supervision and Q.C. charges 19641.00
Gross Total ###
Say Rs. 3.80 Lacs

ASSISTANT ENGINEER (CIVIL)


R.R.V.P.N.Ltd. Dausa

Page 7
Details of Estimate

Name of work :-Repair of balcony, main gates & other misc. wor
type qtrs at 220 KV GSS Dausa.
S No. Item No L B H Qty Unit
Repairs to plaster of thickness -do- the dumping ground within 50 m lead :With cement mortar 1 :
1
4 ( 1 cement : 4 coarse sand)
For various damaged portions in R-5 Qtrs L.S. 25.00 Sqm
Total 25.00 Sqm
Demolishing brick work manually/ by mechanical means including stacking of serviceable
2 material and disposal of unserviceable material within 50 metres lead as per direction of
Engineer-in-charge. In cement mortar.
For parapet wall (For R-5/1 & R-5/2 Qtr) 1x4
0.115 0.906.002.48 Cum
Total 2.48 Cum
Say 3.00 Cum
3 Demolishing CC/R.C.C. work by mechanical power driven means and
stockpiling at designated
For Balconylocations and 1x4
of R-5 Qtrs disposal
3.00of dismentled
0.60 0.25 material
1.8 up
Cumto
to lead of 50 m, stacking serviceable and unserviceable
1x4 1.20 0.60material
0.25 seperately
0.72 Cum
including cutting reinforcement bars Total 2.52 Cum
Say 3.00 Cum
4 Half brick masonry in Superstructure , above plinth level upto floor V level
For Balcony of R-5 Qtrs (For R-5/1 & R- 1x2 6.00 - 0.90 10.80 Sqm
5/2 Qtr) (For R-5/1 & R-5/2 Qtr) 1x2 6.00 0.25 3.00 Sqm
Total 13.80 Sqm
Say 14.00 Sqm
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
5
aggregate) finished with a floating coat of neat cement including cement
slurry,
Formaking
damagedof lines
floor or groove
in R-5 typeetc complete
Qtrs but excluding
L.S. 20.00 - -the cost
20.00of Sqm
nosing of steps etc. complete.40mm thick with 20mm thick Totalnominal
20.00 Sqmsize
6 aggregate
Demolishing cement concrete manually/ by mechanical means including
disposal of material withinFor 50flooring
metres lead 20.00
as perx 0.05
direction of Engineer-in-
1.00 Cum
charge.1: 3: 6 or richer mix. Total 1.00 Cum
Say 2.00 Cum
Providing and laying in position -do-1:4:8 (1 cement : 4 coarse sand : 8
7
graded stone aggregate 40 mm nominal size).
For R-5 Qtrs (under floor) L.S. 2.00 2.00 Cum
Total 2.00 Cum
Grading roof for water proofing treatment with water proffing compound
8 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate
20 mm nominal size)
For R-5 Qtrs L.S. 5.00 5.00 Cum
Total 5.00 Sqm

Page 8 of 18
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse
9 sand : 4 stone aggregate 10mm and down gauge) including finishing with
cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
For R-5 Qtrs L.S. 50.00 50.00 Mtr
Total 50.00 Mtr
Renewing glass panes, with putty and nails wherever necessary: Float glass
10
panes of thickness 4 mm
For R-5 Qtrs L.S. - - - 2.00 Sqm
Total 2.00 Sqm
Providing and fixing steel glazed window frame made out of 80x40 mm
11 hollow sheet section of 16 gauge thickness, joint mitred welded and grinded
including hold fast of steel lugs 13mm x 3mm and 15 Cm long embedded in
C C block 15 x 10 x 10 Cm of 1:3:6 nominal concrete and including8.64 fixing
Sqm of
For damaged windows of R-5 Qtrs 1x6 1.20 1.20
pivoted hinges of superior quality, window shutters made out of 50 x 25.0
Total 8.64 Sqm
mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred
and grinded including 10mm x 10mm square bars welded Say to10.00
frameSqmfor
Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal
12 paitam fixing float glass 4mm thick panes with glazing clips and metal sash
frame of rolled
putty and section
fixing by metal
of shutters beading
frames peg20x3mm with suitable
stay, U shape screw
handle 100 mmat long,
not
exceeding
towerForbolts150mm
damaged
100 mm distance.
windows
long ofof steel
R-5 Qtrs 1x6 coated
powder 1.20 superior
1.20 quality
8.64including
Sqm
fixing and jointing with frame hinges priming coat with steel primer
Total 8.64 complete
Sqm
in all respect as per direction of Engineer-in charge Window openable.
Say 10.00 Sqm
13 Providing and fixing Square bars or other flat welded to window, ventilatiors
For windows of R-5 Qtrs (10 mm dia 8x6 1.20 57.60 Kg.
Total 57.60 Kg.
Say 60.00 Kg.
14 Labour charges for repair to door / window without using any material such
as
Forapplying
repairingrandha (finishing)
of doors tightening
of R-5 Qtrs of bolts
L.S. 20.00& screw et 20.00 Sqm
Total 20.00 Sqm
15 Plaster on new surface on walls in cement sand mortar 1:6 including racking
of
Forjoint etc. complete
balcony wall fine finish : 20mm2x2thick.6.00 0.90 21.60 Sqm
2x2 6.00 0.30 7.20 Sqm
Total 28.80 Sqm
Say 30.00 Sqm
16 Finishing walls with Acrylic Smooth exterior paint of required shade including
Qty sum of item no 1 & 15 55.00 Sqm
Total 55.00 Sqm
Painting exterior surface of wall with 100% acrylic exterior paint of approved
17
brand and manufacture to give an even shade with two or more coats
including sand papering prime For R-5coat,
Qtrs making
L.S. smooth surface with
100.00 cement
Sqm
based putty old work. Total 100.00 Sqm
18 Painting with synthetic enamel paint of approved brand and manufacture to
For R-5 Qtrs L.S. 80.00 Sqm
Total 80.00 Sqm
19 Providing and fixing steel gate, grating , and grills made of angles, tees,

Page 9 of 18
For railingon Balcony of R-5 Qtrs L.S 150 Kg.
Total 150.00 Kg.
Say 10.00 Kg.
20 Providing and fixing M.S. sheet 1mm thick Double leaf door shutter in angle
For C/yard doors ofR-5 Qtrs 1X 5 1.00 2.00 10.00 Sqm
For H-type Qtrs 1x3 1.00 2.00 6.00 Sqm
Total 16.00 Sqm
21 Providing and fixing T-iron frames for doors, windows and-do- screws and
16.00 (weight
applying
For damaged a priming
MS door coat of approved steel
frame 1x8primer. 128 Kg.
/frame)
Total 128.00 Kg.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed 130.00
Say work, Kg.
including
cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel
22 primer all complete:
For Channel of main gate of R-5 Qtrs L.S. ### 100.00 Kg
Total 100.00 Kg
23 Providing and laying in position cement concrete including curing,
For grouting of channel of R-5 Qtrs 1x4 0.45 0.45 1.00 0.81 Cum
Total 0.81 Cum
Say 1.00 Cum
24 Painting with synthetic enamel paint of approved brand and manufacture to
For G-type Qtrs 1x6 25.00 150.00 Sqm
For M.S. door 16.00 x 2.20 35.20 Sqm
Total 185.20 Sqm
Say 200.00 Sqm
25 Providing and applying white cement based putty -do- and smooth complete
For R-5 Qtrs L.S 20 20.00 Sqm

P & F G.I. pipes (Internal Work) with


26
G.I. -do- making good the walls and
floors:
(a) Exposed on wall 15 mm dia
L.S 25.00 Mtr
Nominal bore class B
(b) Exposed on wall 25 mm dia
L.S 15.00 Mtr
Nominal bore class B
P & F Ball Cock (IS :1703 Mark) with
27 Rod & P.V.C. Ball complete :Brass 1x10 10.00 Each
wt.400 gm,15mm.
P&F rigid PVC Pipe (IS:4985 mark)
28 class II/ (4 Kg. /Cm2.) -do-ring and L.S 100.00 mtr
lubricant.110 mm dia
P&F rigid PVC pipe fittings -do-joining
29 the pipe with solvent cement rubber
ring and lubricant
(a) Bend 45 Dg 110mm dia 1x15 15.00 Each

Page 10 of 18
(b) Bend 87.5 Dg 110mm dia 1x15 15.00 Each
Providing & Laying C.C. 1:5:10 -do-
30 Cm+30 Cm.)( Excluding cost of pipe) L.S. 20.00 Mtr
100mm dia S.W. pipe
Construction of manhole in all type of
31 soil inner size-do- including disposal 1x3 3.00 Each
of surplus earth within 50 mtr.
lead.Depth
Constructionupoftochamber
0.5 M in all type of
soil with-do- lead of 50 mtr.Inside size
32 300 X 300 mm depth upto 0.5 M 1x2 2.00 Each
Cement cover with frame.
Raising manhole cover and frames
33 slab to required-do-. Rectangular 1x2 2.00 Each
manhole 90x60 cm
Construction of soakage well in all type of soil
34 with 300 -do- lead of 50 mtr.: Size 240 Cm. dia 1x1 1.00 Each
outside & 240 Cm. depth.
Construction of septic Tank in all types of soil
with 40 Cm-do-disposal of surplus earth within
35 a lead of 50 mtr:- Size 200x100x130 cm.(for 1x1 1.00 Each
10 users)
P & F Indian type white glazed
36 1x4 4.00 Each
vitreous china 1st quality W.C. -do-
Size 580x440mm.
Labour charges for making connection
37 1x10 10.00 Each
of sewer line through main hole.
Part B (Item Rate )
Cleaning of manhole including
1 disposal of sludge -do- upto 900x600 1x4 4.00 Each
mm and depth upto 1.00 mtr.
P&F Brass handles (weight not less
2 than 200 gm each)-do- including cost 1x5 5.00 Per Pair
of screws etc.
Disposal of wastages, garbage,
3 stones, rubbish-do-m. lead from GSS L.S 20.00 Cum
premises complete in all respect.
Removing / scraping existing Elgae-
4 L.S. 100.00 Sqm
do- transportation charges etc.
Applying water proofing -do- or more
5 L.S. 100.00 Sqm
coats wherever required.
Repairing the existing Qtr b/wall main gate
6 1x4 4.00 Each
including-do-of Engineer in charge

Page 11 of 18
ASSISTANT ENGINEER
R.R.V.P.N.Ltd. DAUSA

Page 12 of 18
OFFICE OF THE ASSISTANT ENGINEER (CIVIL)
RAJASTHAN RAJYA VIDHYUT PARSARAN NIGAM LTD, DAUSA

TECHNICAL REPORT
1 GENERAL

1.1 Name of Work : Repair of balcony, main gates & other misc. works in 6
type qtrs at 220 KV GSS Dausa.
1.2 Name of Circle : SE CIVIL , RRVPNL, KOTA
1.3 Name of DivisionXEN CIVIL, RRVPNL, BHARATPUR

2 AUTHORITY
Amount of administrative/financial
Sanction
2.1 Reference of Sanction
(Including/Excluding the
:- prorata
2.2 charges).
2.3 Ref. and abstract details of forecast estimat Nil
2.4 Ref. and technical sanction of work if any is Nil

3 LOCATION AND LAND

3.1 Location At 220 KV GSS Dausa


3.2 Arca
3.3 Possession taken over/not taken Taken Over

4 REFERENCES OF APPROVED DRAWING

S.No Details Drawing No. Authority


4.1 Site Plan
4.2 Plans
4.3 Section
4.4 Elevations
4.5 Details of Components drainage
4.6 Sanitary, Water Supply & draina
4.7 Electrification
4.8 Other Charges
ELEVATION
5 GENERAL (Small)

6 ESTIMETED COST Rs 3.80 Lacs

7 TYPE OF SOIL / S.B.C.

8 BRIEF SPECITIONS: (In case of A/A specification of Existing ma


8.1 Foundation concrete
8.2 Masonry in foundation & Plinth
8.3 Damp proof course
8.4 Superstructure (Type & specification).
8.5 Lintels Sunshadas etc
8.6 Roofing
8.7 Interior finish
8.8 Exterior finish
8.9 Flooring
(A) Base -
(B) Finish -
### Skirting & dados -
8.1 Windows (Frame & Shutters) -
8.1 Doors. (Frame/ Shutters). -
8.1 White/Colour/Cement/Lime (Decorative fi -
8.1 Painting of Doors, Windrows & Walls. -
8.2 Electrification (Type of wiring fitting & f As Per Approved Make
8.2 Sanitary & water Supply As Per Approved Make
8.2 Compound wall & its gate -
### Other specification -

10 SPECIAL FITING AND FIXTURES -


(Fans, Tube Light, Exhaust etc.)

11 AGENCY FOR EXECUTIONS Through Contractor

12 PRESENT STAGE OF EXECUTION Estimate Framed & NIT to be flo

13 COST ANALYSIS -

### B.S.R. adopted and Prior approved by Buiding BSR 2014 DAUSA

### Tender premium (Received/Expected). expected 5 % above

### Total plinth Area -

### Break-up the cost -

14 OTHER SALIENT FEATURE THAT -


NEEDS SPECIFICATION

15 SOUND CERTIFICATE -
Certified that the adopted specification are structurally sound &
economical and estimate is accurate and arithemetically Correct and
based on adequate data.

ASSISTANT ENGINEER CIVIL


R.R.V.P.N.L., DAUSA.

Potrebbero piacerti anche