Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Estogrout MP 60 multi purpose cementitious non-shrink Water Powder 1 day 7 days 28 days
cement grout is formulated to provide good flexural and Ratio At 0.18 (N/mm2) (N/mm2) (N/mm2)
compressive strength performance. It is a ready to use product Compressive
in powder form and requires addition of water to produce as Strength, > 20 > 50 > 60
non-shrink grout performance. BS 6319
Flexural Strength,
Estogrout MP 60 is a blend of Portland cement, graded fillers BS 1881 > 2.5 >9 > 10
and chemical additives that create controlled expansion in the Time For Expansion 15 mins to 2 hours
plastic state. Fresh Weight Density 2170 kg/m3
Expansion Characteristics,
Estogrout MP 60 has been tested by SIRIM BHD, in ASTM C940 0.5 -2.0%
accordance to BS 6319, on Compressive Strength Test,
ASTM C 940-98, on Expansion & Bleeding Test, and Application Instructions
complied with the specification in this data sheet.
Preparation
Uses
Foundation Surface
Estogrout MP 60 is suitable for a wide variety of precision
applications at any consistency from flow able to damp-pack. It The surface of the substrate must be sound and free from oil,
is recommended for:- grease or any loosely adherent material. Bolt holes and fixing
pockets must be blown clean of any dirt or debris. To assist in
General Repair the formation of bond between substrate and grout, pre
Refuse chutes / Generators soaking of the substrate surface with water is advisable.
Presses / Milling Machines
Precast elements / Anchor bolts Base Plate
Formwork & base plate grouting
It is essential that this is clean and free from oil, grease or
Advantages scale. Air pressure relief holes should be provided to allow
venting of any isolated high spots.
Non Shrink (Shrinkage Compensated)
Chloride free & Adjustable consistency Formwork
No metallic iron content to cause staining
Excellent workability retention even at high ambient All formwork used for grouting should be leak proof. This can
temperature be achieved by sealing it with a foam rubber strip or sealant.
Pre-packaged grout overcomes potential on-site
proportioning variations Mixing & Yield
High bond strength to steel and concrete
The quantity of clean water required to be added to a 25kg bag
Good fatigue and impact resistance
of Estogrout MP 60 to achieve the desired consistency is
Application
Curing
Technical Support
Storage
Precaution
Additional Information