0%(3)Il 0% ha trovato utile questo documento (3 voti)
2K visualizzazioni1 pagina
This standard covers the design, materials, dimensions, ratings, and testing requirements for gray iron, ductile iron, bronze, steel, nickel-based alloy, or special alloy butterfly valves. It includes two categories of butterfly valves: Category A valves are manufacturer rated with a concentric disc and seat, in sizes from NPS 2 to NPS 48; Category B valves are ASME Class and pressure-temperature rated, may have an offset seat and eccentric or concentric disc, and covers various sizes and classes from NPS 3 to NPS 48. The standard also specifies valve configurations, facings, construction, and nomenclature.
This standard covers the design, materials, dimensions, ratings, and testing requirements for gray iron, ductile iron, bronze, steel, nickel-based alloy, or special alloy butterfly valves. It includes two categories of butterfly valves: Category A valves are manufacturer rated with a concentric disc and seat, in sizes from NPS 2 to NPS 48; Category B valves are ASME Class and pressure-temperature rated, may have an offset seat and eccentric or concentric disc, and covers various sizes and classes from NPS 3 to NPS 48. The standard also specifies valve configurations, facings, construction, and nomenclature.
This standard covers the design, materials, dimensions, ratings, and testing requirements for gray iron, ductile iron, bronze, steel, nickel-based alloy, or special alloy butterfly valves. It includes two categories of butterfly valves: Category A valves are manufacturer rated with a concentric disc and seat, in sizes from NPS 2 to NPS 48; Category B valves are ASME Class and pressure-temperature rated, may have an offset seat and eccentric or concentric disc, and covers various sizes and classes from NPS 3 to NPS 48. The standard also specifies valve configurations, facings, construction, and nomenclature.
This standard covers design, materials, face-to-face For ordering information:
dimensions, pressure-temperature ratings, and Online: www.api.org/pubs examination, inspection and test requirements for gray iron, ductile iron, bronze, steel, nickel-based alloy, or Phone: 1-800-854-7179 special alloy butterfly valves. (Toll-free in the U.S. and Canada) The following two categories of butterfly valves are included. (+1) 303-397-7056 (Local and International) a) Category AManufacturers rated cold working pressure (CWP) butterfly valves, usually with a Fax: (+1) 303-397-2740 concentric disc and seat configuration. Sizes covered are NPS 2 to NPS 48 for valves having ASME Class 125 or Class 150 flange bolting patterns. API members receive a 30% discount where applicable.
b) Category BASME Class and pressure-temperature
rated butterfly valves that have an offset seat and either an eccentric or a concentric disc configuration. These valves may have a seat rating less than the body rating. Sizes covered are listed below. For lug and wafer, Class 150: NPS 3 to NPS 48. For lug and wafer, Class 300 and Class 600: NPS 3 to NPS 48. For double-flanged long pattern, Class 150, 300, and 600: NPS 3 to NPS 36. For double-flanged short pattern, Class 150 and Class 300: NPS 3 to NPS 48. For double-flanged short pattern, Class 600: NPS 3 to NPS 24. Valve configurations include double flanged, lug- and wafer-type with facings that permits installation between ASME and MSS flanges that conform to the standards and specifications listed in Section 2. Typical valve construction and nomenclature for valve parts are shown in Annex C.
(BS en 10226-1 - 2004) - Pipe Threads Where Pressure Tight Joints Are Made On The Threads. Taper External Threads and Parallel Internal Threads. Dimensions, Tolerances and Des