Sei sulla pagina 1di 19

Ethernet over SDH (STM-1)

Valiant Communications Limited


Telecom Transmission Solutions

Ethernet over SDH (STM-1)

Product Presentation

Updated: 19 April, 2010

Copyright: Valiant Communications Limited - 2010 Slide 1


Ethernet over SDH (STM-1)

Product Overview
Ethernet over SDH (STM-1) Equipment is a modular platform unit with two
pluggable 155.52Mbps optical / electrical interfaces.
Used in a point-to-point, chain or ring application to provide a compact, cost
effective and flexible solution to deliver multiple Ethernet channels.
Interface card options include the 4x100BaseT Ethernet interface card (1
VCG, 4 Ports 1 Channel), 4x100BaseT Ethernet interface card (4 VCG, 4
Ports 4 Channels) and Gigabit Ethernet interface card options along with
Engineering Order Wire is available.
The user removable / replaceable STM-1 Optical / Electrical interface option
makes it easy to meet various and changing user requirements.
STM-1, Ethernet and Gigabit Ethernet over SDH Transmission Equipment
provides full capability to cross-connect at VC-12 level between all
tributaries.
The equipment can be used as Terminal Multiplexer (TM) or an Add-Drop-
Multiplexer (ADM) to build a point-to-point, chain or ring SDH transmission
network.

Copyright: Valiant Communications Limited - 2010 Slide 2


Ethernet over SDH (STM-1)

Features and Highlights


1U height, 19-Inch standard rack-mountable chassis
Service interface
2 x STM-1 optical interfaces, MSA compliant SFP (pluggable) optical
module (LC connector) based design, which supports onsite optical port
replacement
2 x STM-1 electrical interfaces, SFP electrical module (Mini BNC
connector) Optional
4 x 10/100BaseT Ethernet (electric) interface
10/100BaseT (FE) Ethernet Interface Options
4 Ports, 4 Channels (4 VCG)
4 Ports, 1 Channel (1 VCG)
1 x GigE (Gigabit) Ethernet interface Options
Optical GigE (Gigabit) Ethernet interface
Electrical 1000BaseT (Gigabit) Ethernet Interface

Copyright: Valiant Communications Limited - 2010 Slide 3


Ethernet over SDH (STM-1)

Features and Highlights


Provides complete diagnostics facilities to the user for monitoring optical ports
and provide reading of optical transmit power, optical receive power, laser
temperature, bias current in voltage alarms etc.
Performance Monitoring and Alarms - Error counts for B1, B2, B3
Performance Analysis - Error Seconds (ES), Several Error Seconds (SES),
Unavailable seconds (UAS), Higher Order Virtual Container - Remote Error
Indication (HOVC-REI), Higher Order Virtual Container - Pointer Justification
Event (HOVC-PJE)
Management and Maintenance interfaces
10/100BaseT Ethernet management interface
RS232 serial management interface
Remote (Telnet) management interface
Windows XP based Graphical User Interface (GUI)
Windows 7 based Graphical User Interface (GUI)
SNMP V2 Monitoring
Engineering Order Wire (EOW) interface (RJ-11).

Copyright: Valiant Communications Limited - 2010 Slide 4


Ethernet over SDH (STM-1)

Features and Highlights


NMS (Network Management System) for monitoring multiple units from a
single / central location.
Timing mode
Synchronization with STM-1 line timing
External timing source - 120 Ohms 2MBps (External Bits Clock) - Factory
Configurable
External timing source - 120 Ohms 2MHz (External TTL Clock) - Factory
Configurable
Internal Clock - ITU-T G.813 internal oscillator (Stratum 3)
The timing source can be auto-switched according to default or operator
programmed settings
Ethernet Standards Conformity
Generic Framing Procedure GFP-F compliant with ITU-T G.7041
VCAT compliant with ITU-T G.707 and LCAS compliant with ITU-T G.7042
Ethernet flow control on WAN port and LAN port
Large buffer size upto 410,000 bytes

Copyright: Valiant Communications Limited - 2010 Slide 5


Ethernet over SDH (STM-1)

Features and Highlights


Maximum Frame length (MTU size):1536 bytes with 4 port 1 channel
(1 VCG) Ethernet Card
Maximum Frame length (MTU size):2036 bytes with 4 port 4 channel
(4 VCG) Ethernet Card
Auto MID/MID-X for Ethernet Interfaces
Support 802.1Q based VLAN tagging (4 ports 1 channel (1 VCG)
Ethernet Card only)
Support Port based VLAN tagging (4 ports 1 channel (1 VCG) Ethernet
Card only)
Performance Analysis
All Received Packets
All Transmitted Packets
Received Dropped Packets
Ethernet bandwidth can be adjusted by the user between 2Mbps ~126
Mbps (VC-12 mapping)
Supports MAC Address list filtration, learning and updating function

Copyright: Valiant Communications Limited - 2010 Slide 6


Ethernet over SDH (STM-1)

Features and Highlights


Supports 1+1 Line Protection and Automatic Protection Switching (APS) with
less than 50ms recovery
Supports point-to-point, ring and chain topology (4 VCG card only)
Supports Remote Power Down Detection and Auto Laser Shutdown
Supports STM-1 loop-back for troubleshooting
850nm multi-Mode, 1310nm Single Mode and 1550nm Single Mode optical
interface options offered
Ethernet mapping adopts GFP/VC-12 virtual concatenated technology;
according with MSTP criterion
Provides Ethernet over SDH mapping through standard GFP and VC-12
virtual concatenation (VCAT)
Easy to operate
Redundant power supply card (EMI/EMC Complied) options AC+DC,
DC+DC and AC+AC.
110V AC - 240V AC (50/60 Hz) power options available
-48V and - 4V DC power option available
Power consumption less than 12W.
Copyright: Valiant Communications Limited - 2010 Slide 7
Ethernet over SDH (STM-1)

Alarm and Indicator Monitoring


Power Indicator
Current Status (integrity and activity) Indicator
Urgent Alarm Indicator
Minor Alarm Indicator
Optical Signal Loss Alarm Indicator
Remote Device Power-down Indicator
Ethernet Card Status Indicator
General Alarm Indicator for Ethernet Card (including Link-down of Ethernet
Port)
Auto Laser Shutdown (ALS) Indicator
Engineering Order-Wire (EOW) Indicator
Ethernet Link Indicator
Ethernet Speed Indicator
Dry contact via 9-pin, D-type male connector
Buzzer Alarm
SNMP Diagnostic and Monitoring

Copyright: Valiant Communications Limited - 2010 Slide 8


Ethernet over SDH (STM-1)

Application Diagram
Point to point network (Shared Link Mode) 1 VCG card application

LAN LAN

STM-1 Link SDH STM-1 Link

LAN LAN

Ethernet over SDH (STM-1) Ethernet over SDH (STM-1)

ROUTER ROUTER

ROUTER ROUTER

Copyright: Valiant Communications Limited - 2010 Slide 9


Ethernet over SDH (STM-1)

Application Diagram
Point to point network (Discrete Link Mode) 4 VCG card application

LAN LAN

STM-1 Link SDH STM-1 Link

LAN LAN

Ethernet over SDH (STM-1) Ethernet over SDH (STM-1)

ROUTER ROUTER

ROUTER ROUTER

Copyright: Valiant Communications Limited - 2010 Slide 10


Ethernet over SDH (STM-1)

Front Panel Description

Copyright: Valiant Communications Limited - 2010 Slide 11


Ethernet over SDH (STM-1)

Switches
ADDRESS NE / EOW (Phone) address switch
MUTE Alarm speaker mute / unmute switch

LED Indicators
PWR (Green) Power indicator
RUN (Green) Running indicator
UALM (Red) Urgent alarm indicator
DALM (Yellow) Minor alarm indicator
NOP A/B (Red) Optical / electrical signal loss Alarm indicator
RPD A/B (Yellow) Remote device power-down indicator
ETH (Green) Ethernet card existing status indicator
TALM (Red) General alarm indicator for Ethernet card
ALS (Green) Auto Laser Shut enable / disable status indicator
BUSY (Green) EOW (Phone) status indicator

Copyright: Valiant Communications Limited - 2010 Slide 12


Ethernet over SDH (STM-1)

Access Interfaces
CONSOLE (RJ-45) Serial network management interface for CLI
management
EMU (RJ-45) Ethernet network management interface

Optical Interfaces
OPTA SFP based optical / electrical interface A
OPTB SFP based optical / electrical interface B

External Alarm (U/DALMO) Interface


U/DALM (DB-9) Urgent (major) and differed (minor) external alarm
interface

Copyright: Valiant Communications Limited - 2010 Slide 13


Ethernet over SDH (STM-1)

User Channel (RS232) Interface


RS2322 (RJ-45) User channel interface, RS232 level, used to transmit
the collected alarm information of the telehouse, the
user control information and etc.

EOW Interfaces
EOW Interface (RJ-11) Engineering Order Wire (Phone) interface, Ordinary
telephone set with two line mode can be used.

External Management / Timing Interfaces


ETS1/ETS2 (RJ-45) Two external timing source (TTL or Bits) interfaces
EXM1/EXM2 (RJ-45) Two external management interfaces

Copyright: Valiant Communications Limited - 2010 Slide 14


Ethernet over SDH (STM-1)

Rear Panel Description

Copyright: Valiant Communications Limited - 2010 Slide 15


Ethernet over SDH (STM-1)

AC and DC Power Supply


Power Slot Two power card slots, one for 110V AC - 240V AC (50/60 Hz),
the other is -48V DC.
Two different cards (AC+DC) or two same cards (AC+AC,
DC+DC) can be inserted into the device simultaneously.
Power Switch ON / OFF switch,
'1': Power ON,
'0': Power OFF.

Ethernet Options
SOCKET 3 Ethernet Card, (4 x RJ-45)
Option 1 4 Ethernet ports, 4VCG (4 port, 4 channel)
Standard configuration

Option 2 4 Ethernet ports, 1VCG (4 port, 1 channel).

Copyright: Valiant Communications Limited - 2010 Slide 16


Ethernet over SDH (STM-1)

Management Options
Easy to use CLI commands through RS232 serial connection and TCP/IP
TELNET connection
SNMP V2 Management through MIB browser
DIP switch settings given on front panel
Windows XP / Windows 7 based GUI (Graphical User Interface) to access
the equipment over RS232 serial connection, TCP/IP and SNMP protocol.

Alarms and Indicator Monitoring


SNMP based Alarms (TRAPS) event monitoring through MIB browser and
NMS
Visual alarm indicators in the front panel
Ethernet (Data) port speed and mode status
Real time Buzzer alarm for any alarm event.

Copyright: Valiant Communications Limited - 2010 Slide 17


Ethernet over SDH (STM-1)

NMS (Networks Management System) built in GUI


Monitoring and Managing multiple systems from a central location over
RS232 serial connection (Local), TCP/IP TELNET and SNMP Protocol (LAN
or Remotely)
Monitoring single system
Monitoring multiple systems
NMS (Network Management System) provides the facility to monitor
multiple systems from a central location and provide alert (SNMP
based) if any alarm event occurs on any Network Element (NE).

Copyright: Valiant Communications Limited - 2010 Slide 18


Ethernet over SDH (STM-1)

Thank you for your attention


For more details visit us at our Website at
http://www.valiantcom.com

U.K. U.S.A. INDIA

Valiant Communications (UK) Ltd Valcomm Technologies Inc. Valiant Communications Limited
1, Acton Hill Mews, 4000 Ponce de Leon, Suite 470 71/1, Shivaji Marg,
310-328 Uxbridge Road, Coral Gables, FL 33146 New Delhi - 110015,
London W3 9QN, United Kingdom United States of America India
E-mail: gb@valiantcom.com E-mail: us@valiantcom.com E-mail: mail@valiantcom.com
Website: http://www.valiantcom.com Website: http://www.valiantcom.com Website: http://www.valiantcom.com

Copyright: Valiant Communications Limited - 2010 Slide 19

Potrebbero piacerti anche