Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Windows
The Windows tool for flashing the image is provided by
Rockchip. To flash the update.img(you'd better click this link
and read this page,it's very Important for the radxa
beginner), you need to use the RKBatchTool and to flash
the partitions, you will need to use RKDevelopTool. Both
RKBatchTool and RKDevelopTool rely on the RK USB
driver so you will need to install it first as below:
Install driver
1.install using RKDriverAssistant tools - the easy
way(Just for winXp, Vista, Win7,not support Win8)
b. Install Manually
Download driver file first. For WinXp,Vista,Win7,Download
the file (usb_driver_v3.5.zip) from here . For Win8
Download the file(usb_driver_v3.7.zip) from here. shut
down the Radxa Rock board then connect the Radxa Rock
board to the computer and let the board go to loader mode.
After your computer should detect the board and you will
see an unknown device within device manager.
Flash Image
Download the tool first AndroidTool_Release_v2.3.zip
http://v.youku.com/v_show/id_XNjkzNDk3MjEy.html
Troubleshooting
FlashTool can not recognize the
board
This often happened by the follow reasons:
Note:
4) bad quality usb cable, you can change a short and good
quality one to try again
Flashing failed
For rock pro
After flashing, the uart print
you can press reset key and reflash , if still failed ,you can
refer to http://talk.radxa.com/topic/957/bricked-rock2/19 or
send mail to support@radxa.com
Linux
Rockchip has provided tools for upgrading within Linux
(closed source) since Android 4.4. It's called upgrade_tool.
It supports update.img, parameter, bootloader and other
partitions, and it's command line based.
Upgrade_tool from
Rockchip
Download the Rockchip linux upgrade tool here. Unzip it
and you will get a file called upgrade_tool which is a binary
executable file under Linux.
If you have an error with upgrading you can low level format
the nand flash first with the following command:
Flash by partitions
The whole files you should flash
are"parameter","bootloader","boot.img","recovery.img""syste
m.img" , all the file you can find under the rockdev/ after you
build the android successful.
Flash bootloader
sudo ./upgrade_tool ul /path/to/bootloader #(UL
Upgrade Loader)
parameter -p
boot -b
system -s
recovery -r
misc -m
Flash parameter
sudo ./upgrade_tool di parameter
/path/to/parameter
or for short
Others
There are other commands in the upgrade_tool, such as:
FAQ
The partations info you can get from the paramteter file
under the rockdev/ which in the android source code.
CMDLINE:console=ttyFIQ0
androidboot.console=ttyFIQ0
init=/init initrd=0x62000000,0x00800000
mtdparts=rk29xxnand:0x00002000@0x00002000(misc
),
0x00006000@0x00004000(kernel),
0x00006000@0x0000a000(boot),
0x00010000@0x00010000(recovery),
0x00020000@0x00020000(backup),
0x00040000@0x00040000(cache),
0x003FC000@0x00080000(userdata),
0x00002000@0x0047C000(metadata),
0x00002000@0x0047E000(kpanic),
0x00180000@0x00480000(system),
-@0x00600000(user)
5) Other questions
To install rkflashtool:
To read/write parameter:
To read/write partitions:
sudo rkflashkit
1.Click the Nand partition and you will see the partitions
of the board listed then choose the one you want to
flash.
External Reference
http://www.hagensieker.com/styled-26/index.html