Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
S 350 bar, 140 l/min S Cartridge spring chamber is drained S Also available with solenoid con-
S With two--stage 10 mm pressure relief to port T trolled two--pressure cartridge
cartridge DVPA--3--10... S Optionally available with hand knob, WUVPB--3...--10
S 350 bar, 140 l/min on all ports or lockable hand knob, adjuster S ISO 4401 / CETOP R35H size 5,
NFPA D05, DIN 24 340 A10 interface
1. Description
Series SDVB--3...--10 stack valves are check valve in models duces the SDVB--3--BBAR--10 function
used for sequence-- and preload func- SDVB--3--...AR--10... and and vice versa. Ditto
tions. They are equipped with the two-- SDVB--3--...BR--10... allows reverse SDVB--3--AAAR--10 and ...--BBZR...
stage pressure relief cartridge type flow from A1 to A, or B1 to B. The side--mounted nameplate indi-
DVPA--3--10... . When closed, the NOTE: after the connection P P1 (or cates the correct orientation for the re-
valves shut off the relief path with A A1, B B1) has opened, pilot oil quired function. The screw--in design of
spool--type leakage (see performance drain flow to T will increase with rising the cartridge valve provides for
graphs). The cartridge spring chamber system pressure (see performance straight--forward, trouble--free mainte-
is drained to port T -- the pressure set- graphs). nance. Interface sealing is by means of
ting is unaffected by fluctuations of the Turning model SDVB--3--AAZR--10 up- a seal plate and 5 O--rings.
secondary pressure. The bypass side down about its short axis pro-
2. Symbols
P1 T Valve side BA P T Valve side B A1 P T Valve side B1 A
1 3 5
M
SDVB--3--AAAR--10 ... A SDVB--3--BBAR--10 ... B
P
SDVB--3--PP--10 ...
P T BA P T B A
2 4
3. Main characteristics
4. Performance graphs
Measured with oil viscosity 33 mm2/s
(cSt)
SDVB--3--PP--10--..N SDVB--3--PP--10--..M SDVB--3--PP--10--..L
p--Q characteristics p--Q characteristics p--Q characteristics
with p in T = 0 (bar) with p in T = 0 (bar) with p in T = 0 (bar)
350
Performance
Performance
300
Performance
210 65
250
pP (bar)
pP (bar)
pP (bar)
200 150 45
limits
limits
150
limits
100 30
100
50 50 15
pA (pB) (bar)
pA (pB) (bar)
Performance
300
Performance
210 65
Performance
250
200 150 45
limits
150 100
limits
30
limits
100
50 50 15
AA1, BB1
in sequence mode
Pilot flow
Q (l/min)
p (bar)
150 1,5 30
100 1,0 20
50 0,5 10
75 150 225 300 50 100 150 200 250 300 20 40 60 80 100 120 140
pP (pA, pB) (bar) pP (pA, pB) (bar) Q (l/min)
with pT = 0 (bar) Cracking pressure approx. 0,2 (bar)
Average pilot flow in
Pilot stage closed pressure relief mode approx. 0,33 l/min
Rate of pressure change
when turning the adjusting screw:
SDVB-- 3-- ..-- 10-- ..N:1 turn app. 60 (bar)
SDVB-- 3-- ..-- 10-- ..M:1 turn app. 38 (bar)
SDVB-- 3-- ..-- 10-- ..L:1 turn app. 13 (bar)
..BBZR..
..BBAR..
Valve side
..PP..
M
SWISS MADE
48,7
50
27,5
23,8
25
P T B A
1,3
58 58
max.
116 50
5 max. 166 ( BBAR / BBZR )
max. 171 ( PP )
Valve side
Adjuster style H
SWISS MADE
Hand knob (can be
SDVB-- 3-- AAZR-- 10-- S
fitted later by user)
48,7
40
50
27,5
23,8
P T B A
max. 37,5
1,3
31 54 31 Adjuster style Z4
29,5
6,5
Volkswagen Factory
32
A B Sprcification BV 1.09
46
70
6. Schematic section
showing the relevant ports
Ex. SDVB--3--BBZR--10 ...
Seal kit no. DS--221, comprising *):
1 2 5
B Itm. Qty. Qty. Description Size
1 1 1*) Seal 22,1 x 16,5 x 2,5
2 2 2*) O--ring no. 020 21,95 x 1,78 N90
3 1 1*) O--ring 14 x 2
10 4 1 1*) O--ring no. 013 10,82 x 1,78 N90
5 1 1*) O--ring no. 012 9,25 x 1,78 N90
11
B1 6 2 2*) Backup ring 13,7/1,5x1,4 FI0751
9 7 5 5*) O--ring no. 014 12,42 x 1,78 N90
7 3 6 4 8 8 1 1*) Snap ring 9 type SS
9 -- 1*) O--ring no. 018 18,77 x 1,78 N90
10 -- 1*) O--ring no. 016 15,60 x 1,78 N90
11 -- 1*) Backup ring 15,3/1,5x1,4 FI0751
SDVB--3--AAAR/ZR / BBAR/ZR--10 ...
SDVB--3--PP--10 ...
8. Ordering code
Ex. S D V B - 3 - AA Z R - 10 - S N _
S = stacking valve
D = pressure relief function
V = two--stage
A ... Q = standard model per current data sheet
Z ... R = special features by arrangement
3 = pressure control type 3
PP = function from P to P1
AA = function from A to A1
BB = function from B to B1
A = sequencing from actuator
...AR... and ...ZR... only
Z = sequencing to actuator
R = with bypass check valve ...AR... and ...ZR... only
10 = ISO 4401 size 5 interface
S = with hex. skt. screw adjuster (standard)
H = with hand knob adjuster
Z = with lockable hand knob adjuster type Z4
N = pressure range 10 ... 350 bar (Normal)
M = pressure range 10 ... 210 bar (Medium)
L = pressure range 10 .... 65 bar (Light)
(blank) = Nitrile seals (standard)
V = Viton seals
Special seals by arrangement
info.ch@bucherhydraulics.com www.bucherhydraulics.com
E 2015 by Bucher Hydraulics AG Frutigen, CH-3714 Frutigen
All rights reserved.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The
information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual
improvement, we reserve the right to amend the product specifications contained in this catalogue.