Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Education:
Diploma in Mechanical Engineer, Mumbai University, India
Core Competencies
Review project specification and prepare the inspection and test plan as per the
client specification, applicable code requirements.
Check actual application of project specification and if required raise concession
request or waiver to client through project manager.
Conducting pre inspection meetings, preparation of procedure qualification record
(PQR), qualification of welding procedure specification (WPS), welder training,
preparation of ITP, performance monitoring and certification according to ASME Sec.
IX,
Familiar with all international industry codes (i.e. AWS, ASTM, ASME, ASNI, API, etc.)
1
Coordinate with procurement and engineering department that materiel meets the
client requirements
Stage wise inspection during the fit up and welding activities.
Receiving material inspection welding stage, in process and final inspection, reports
preparation and documentation as per requirements.
Solving welding problems in several of fabrication and NDT co-ordination.
Report preparation, review, submission and documentation as per client and quality
system requirements.
Control calibrated measuring and test equipment used on the project.
Work Experience:
Stanger Asia Ltd, Hong Kong (June 2012-Present)
Project: Various
Client : Various
Assistant Manager (Technical) : Interact with Technical Manager to
implement the requirement as required by relevant accreditation scheme to
ensure the proper functioning of the department and the quality of the test
result, Assuming overall responsibility for NDT and Welding Inspection Services,
Perform Day to day management of welding department, Review technical
procedure, Conduct training on major NDT method for junior staff, Conduct onsite
audit and surveillance visit, Draft WPS, Issue PQR, Supervise on NDT operators and
2
Welding Inspectors, Provides technical support for field NDT Inspector and Welding
Inspectors, Verify NDT Inspection and Welding Inspection report, Ensure that quality
assurance standard and procedure are maintained, Ensure overall document are
maintained as per HOKLAS (Hong Kong laboratory accreditation scheme). Become
HOKLAS approved signatory.
3
Piping) as per drawings and specification, Carried out weld visual inspection of
welding before, during & after welding, Review all the NDT reports, welding
inspection reports, mill test certificate and identification of steel renewal as per the
class requirements, Fit up and final welding inspection with class and client, Review
all the NDT personal certificates and instruments validity certificates, Preparation of
mechanical completion report, Maintaining weld summary record & weld joint
records, Witnessing hydrostatic and pneumatic tests, Hardness Testing, Air leak Test,
Follow the WPS for pre and post heat treatment and maintained the during
temperature, Training & qualification of welders & welding operators, Co-ordination
with class and client to full fill the requirements. Interpretation of RT films, Co-
ordination with sub-contractors, engineering and project dept. witnessing all the QC
related activities and preparing the report. Performing NDT
Personal Details:
Name : Shrikant B Utekar
4
Passport Details : H3433127 Valid up to 18/02/2019
SHRIKANT UTEKAR