Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Maintenance Frequency
Description Comment
Daily Weekly Monthly Annually
Boiler blowdown Verify the bottom, surface and water column blow
X
downs are occurring and are effective.
Check water level Stop feedwater pump. Do not allow water level to
X
control drop below recommended level.
1
Inspect system for Look for: leaks, defective valves and traps,
water or steam leaks corroded piping, and condition of insulation.
X
and leakage
opportunities
Combustion air supply Check combustion air inlet to make sure openings
X
are adequate and clean.
Check belts and Check belts for proper tension. Check packing
X
packing glands glands for compression leakage.
Check all blower belts Check for tightness and minimum slippage. X
Check all gaskets Check gaskets for tight sealing. Replace if they do
X
not provide a tight seal.
Inspect boiler Inspect all boiler insulation and casings for hot
X
insulation spots.
Perform water quality Check water quality for proper chemical balance.
X
test
2
Inspect and repair Use recommended material and procedures.
refractories on X
fireside